HUIOP Relay Module,DC 12V Voltage Detection Charging Discharge Monitor Test Relay Switch Control Board Module
Asin: B0C174JDQR
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Adjustable Voltage Limit: 0-99.9V..
We Provide 6 Months Of After-Sales Protection Service. If You Have Any Questions, Please Feel Free To Contact Us..
Can Be Used For Voltage Detection Switch, Battery Over/Under Voltage Protector Or Discharge Meter..
When The Measured Voltage Is Lower Than The Lower Limit Or Higher Than Upper Limit Value, The Relay Works..
Features
- Digital display DC voltage detection, control the relay output.
- When the measured voltage is lower than the lower limit or higher than upper limit value, the relay works.
- Adjustable voltage limit: 0-99.9V.
- Can be used for voltage detection switch, battery over/under voltage protector or discharge meter.
- We provide 6 months of after-sales protection service. If you have any questions, please feel free to contact us.
- See more on Amazon...
Brand: HUIOP | Manufacturer: HUIOP
Dimensions: 0.79 x 1.97 x 1.57 inches
See On Amazon Similar To HUIOP Relay ModuleDC 12V Voltage
#1
irhapsody 5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Automotive Relay
Asin: B074FSZWVT | Model: 13 | PartNumber: 13
Be Careful When Inserting The Relay Into The Socket. If You Force It, You Will Bend The Female Connectors.
Nominal Coil Voltage: 12 V Dc; Coil Power: 1.8 W; Coil Resistance: 80 Ω; Must Operate Voltage: 6~8 V Dc; Must Release Voltage: 0.6~3.6 V Dc; Maximum Applied Voltage: 15.6 V Dc.
Primary Leads Use 12 A.W.G Tinned Copper Wire. Coil Leads Use 16 A.W.G.
12-Volt 5-Prong Relay. Excellent Water-Repellent And Dustproof Ability, But Not Using It In Water.
Features
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
- Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
- Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 ; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC
- See more on Amazon...
Brand: iRhapsody | Manufacturer: IRHAPSODY
Dimensions: 1.70 x 7.85 x 1.60 inches | Weight: 1.25 pounds
Warranty: ONE YEAR WARRANTY
See On Amazon #2
TRUE MODS 6 Pack 4-Pin 12V Bosch Style Fused Relay Switch Kit [Interlocking Harness Socket Holder] [14 AWG Hot Wires] [SPST] [30 Amp] 12 Volt Automotive relays with Fuse for Auto Cars
Asin: B01NBAO1SA | Model: PSZACCEPS179R | PartNumber: PSZACCEPS179R | Ean: 0816165023880 | UPC: 816165023880
12Vdc (14V Max) And 30A High Switching Capability..
Set Includes 6 Relays, 6 Relay Harnesses, And 6 Blade Fuses..
Wire Specifications: Black - Ground (85), Red - Vdc (30), White - Trigger (86), Blue - Output N/O (87)..
Bosch Style 4-Pin Spst (Single Pole Single Throw) Relay..
Features
- Built in fuse socket with included 30A blade fuse with heavy duty 14AWG wires for main contact.
- Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.
- 12VDC (14V Max) and 30A High Switching Capability.
- Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87).
- Set includes 6 relays, 6 relay harnesses, and 6 blade fuses.
- See more on Amazon...
Brand: ONLINE LED STORE | Manufacturer: ONLINE LED STORE
Dimensions: 2.00 x 6.50 x 5.62 Inches | Weight: 0.80 pounds
See On Amazon #3
irhapsody 4-PIN 40/30AMP 12V DC Waterproof Relay with Harness - Heavy Duty 12 AWG Tinned Copper Wires, 1 Pack SPST Automotive Relay
Asin: B08D8TSMFV
For The People Whose Relays Are Burning, Please Make Sure You Are Making Tight Connections (Especially On The Load Wires), Read The Specs On The Item Description, And Ensure That The Operating Environment Meets The Safety Requirements Of The Relay.
Thick 12 Gauge Wire For The Load Terminals. Easy To Install Just Make Sure You Follow The Wiring Diagram. Works For Both Positive And Negative Activation.
Be Careful When Inserting The Relay Into The Socket. If You Force It, You Will Bend The Female Connectors.
12-Volt 4-Prong Relay. Excellent Water-Repellent And Dustproof Ability, But Not Using It In Water.
Features
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 4-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- For the people whose relays are burning, please make sure you are making tight connections (especially on the load wires), read the specs on the item description, and ensure that the operating environment meets the safety requirements of the relay
- Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
- Thick 12 gauge wire for the load terminals. Easy to install just make sure you follow the wiring diagram. Works for both positive and negative activation
- See more on Amazon...
Brand: iRhapsody | Manufacturer: IRHAPSODY
Warranty: 1 year
See On Amazon #4
irhapsody Relay 120A, 12V Continuous Duty Relay, 4 Pin High Current Relay, Split Charge Relay Switch, Spst High Power On/Off Heavy Duty Starter Relay
Asin: B07T35K8S2 | Model: AutoRelay-12V120A1P | PartNumber: AutoRelay-12V120A1P
Ideal For Split Charging Or Any Vehicle Needing A High-Power Relay.
The Size Of The Round Stud Terminals: M6/6Mm.
Never Go Beyond Its Capabilities; Try To Stay 10 To 15% Below What The Rate Is For.
Large Capacity, High Current Carrying Capacity, Heavy-Duty Make/Break Relay.
Features
- Coil power: 1.8w, and coil resistance is 80 ohms. It is more reliable than 2.4w((60 ohms) and 4.8w(30 ohms) relays on the market
- Large capacity, high current carrying capacity, heavy-duty make/break relay
- Ideal for split charging or any vehicle needing a high-power relay
- Never go beyond its capabilities; try to stay 10 to 15% below what the rate is for
- The size of the round stud terminals: M6/6mm
- See more on Amazon...
Brand: iRhapsody | Manufacturer: IRHAPSODY
Dimensions: 2.95 x 1.77 x 1.77 Inches
Warranty: 1 YEAR
See On Amazon #5
TRUE MODS 6 Pack Bosch Style 5-Pin 12V Relay Kit [Interlocking Harness Socket Holder] [14 AWG Hot Wires] [SPDT] [30/40 Amp] 12 Volt Automotive Relays for Auto Fan Cars
Asin: B01KVZ2MU4 | Model: 13 | PartNumber: 13 | Ean: 0816165023088 | UPC: 816165023088
Interlocking Design Relay Socket Harness Base For Easy Cable Management & Organization..
Wire Specifications: Black - Ground (85), Red - Vdc (30), White - Trigger (86), Yellow - Output N/C (87A), And Blue - Output N/O (87)..
Heavy Duty 14Awg Wires For The Main Contact And Pre-Wired With 6" Pigtail Leads..
Bosch Style 12Vdc (14V Max) 5-Pin Spdt (Single Pole Double Throw) Relay With 40A/30A High Switching Capability..
Features
- User Manual available for download under Product Information Details
- Bosch style 12VDC (14V Max) 5-Pin SPDT (Single Pole Double Throw) Relay with 40A/30A High Switching Capability.
- Interlocking design relay socket harness base for easy cable management & organization.
- Heavy duty 14AWG wires for the main contact and pre-wired with 6 pigtail leads.
- Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Yellow - Output N/C (87a), and Blue - Output N/O (87).
- See more on Amazon...
Brand: ONLINE LED STORE | Manufacturer: ONLINE LED STORE
Dimensions: 1.62 x 5.75 x 5.25 inches | Weight: 0.94 Pounds
See On Amazon #6
TRUE MODS 1 Pack 5-Pin 12V Bosch Style Waterproof Relay Kit [Harness Socket] [12 AWG Hot Wires] [SPDT] [30/40 Amp] 12 Volt Automotive Marine Relays for Boats Auto Fan Cars
Asin: B01N66W2XF | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0816165023866 | UPC: 816165023866
Bosch Style 5-Pin Spdt (Single Pole Double Throw) Relay..
Wire Specifications: Black - Ground (85), Red - Vdc (30), White - Trigger (86), Yellow - Output N/C (87A), And Blue - Output N/O (87)..
12Vdc (14V Max) And 40A/30A High Switching Capability..
Waterproof Construction & Heavy Duty 12Awg Wires For The Main Contact..
Features
- User Manual available for download under Product Information Details
- Waterproof construction & heavy duty 12AWG wires for the main contact.
- Bosch style 5-Pin SPDT (Single Pole Double Throw) Relay.
- 12VDC (14V Max) and 40A/30A High Switching Capability.
- Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Yellow - Output N/C (87a), and Blue - Output N/O (87).
- See more on Amazon...
Brand: ONLINE LED STORE | Manufacturer: ONLINE LED STORE
Dimensions: 2.37 x 4.12 x 2.37 inches | Weight: 0.24 pounds
See On Amazon #7
Hamolar 2 Pack 12V 40/30 Amp Car Relay DC 5 Pin SPDT and Harness - Heavy Duty 12 AWG Copper Wires Relays Kit Bosch Style for Automotive Truck Van Motorcycle Boat
Asin: B093GMF6M1 | Model: JD1914 with Harness Socket-2PCS | PartNumber: JD1914 with Harness Socket-2PCS | Ean: 0757842075344 | UPC: 757842075344
Wire Specifications: White - Ground (85), Blue - Vdc (30), Black - Trigger (86), Red - Output N/C (87A), And Yellow - Output N/O (87)..
Relay And Harness Kit Made By High-Grade Flame Retardant Materials To Ensure Superior Quality And Long Lifespan. 2 Years Warranty..
The Dc Car Relay Adopts Waterproof Sealing Technology At The Bottom And A Fixed Back Strip On The Back, Which Is Suitable For Various Complicated Installation Environments..
Function: 12Vdc (14V Max) 5 Pin Spdt (Single Pole Double Throw) Relay With 40A/30A High Switching Capability..
Features
- The 12v relay harness base contains 3*12 AWG and 2*16 AWG cables, length: 5.5 in, which have higher load-bearing capacity and more stable performance.
- Function: 12VDC (14V Max) 5 Pin SPDT (Single Pole Double Throw) Relay with 40A/30A High Switching Capability.
- Wire Specifications: White - Ground (85), Blue - VDC (30), Black - Trigger (86), Red - Output N/C (87a), and Yellow - Output N/O (87).
- The dc car relay adopts waterproof sealing technology at the bottom and a fixed back strip on the back, which is suitable for various complicated installation environments.
- Relay and harness kit made by high-grade flame retardant materials to ensure superior quality and long lifespan. 2 Years Warranty.
- See more on Amazon...
Brand: Hamolar | Manufacturer: Hamolar
See On Amazon #8
irhapsody 1 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Automotive Relay
Asin: B074QV54V1
Be Careful When Plugging The Relay Into The Socket. If You Push Hard, You Will Bend The Female Connector.
Spdt Relay: It Has Both Normally Open And Normally Closed Terminals, Terminal 87A Is Powered When The Relay Is Inactive And Switches The Power To Terminal 87 When The Relay Is Activated.
Primary Leads Use 12 A.W.G Tinned Copper Wire. Coil Leads Use 16 A.W.G.
12-Volt 5-Prong Relay. Excellent Water-Repellent And Dustproof Ability, But Not Using It In Water.
Features
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- Be careful when plugging the relay into the socket. If you push hard, you will bend the female connector
- Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
- SPDT relay: it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to terminal 87 when the relay is activated
- See more on Amazon...
Brand: iRhapsody | Manufacturer: IRHAPSODY
Dimensions: 1.35 x 8.17 x 1.40 Inches | Weight: 0.24 Pounds
Warranty: 1 YEAR WARRANTY
See On Amazon #9
DaierTek 12V Relay with Built-in Diode & 12 AWG Harness Socket 30A/40A Heavy Duty SPDT 5 Pin Relay Switch Waterproof for Automotive Car Marine Boat -8pcs
Asin: B0BY8JRHZ3 | Model: JD1914-W12V-8Pcs | PartNumber: JD1914-W12V-8Pcs
【12Awg Harness】 - The Wires Which Come With This Relay Socket Are 12Awg/16Awg Design, The 12 Awg Wires Include Red, Blue And Yellow Wires Which Are The Wires For High Power Terminals Of The Spdt Relay; And 16 Awg White And Black Wires For The Coil Terminals..
【Wide Application】 - The Waterproof Relay 12V Acts As A Bridge Between Switches And Devices, Which Helps To Achieve Controlling High Rating Devices By Small Rating Switches, Suitable For Auto, Car, Truck, Marine Boat, Etc..
【Waterproof】 - This 5 Pin Relay 12V Has Seal Ring Inside The Harness Socket To Improve Its Waterproof Performance, Makes It Much Safer Under Moist Environment Use..
【Built-In Diode】 - This 12 Volt Relay Has A Built-In Diode, Which Aims To Consume The Induced Voltage That Is Generated By The Coil While Switching The Status Of Automotive Relay, And Therefore Protect The Electric Components From Being Damaged By The Induced Voltage..
Features
- 30A/40A Relay - These 5 pin relays are rated at 12v 30A/40A (NO: 40A, NC: 30A), spdt heavy duty design relay switch.
- Built-in Diode - This 12 volt relay has a built-in diode, which aims to consume the induced voltage that is generated by the coil while switching the status of automotive relay, and therefore protect the electric components from being damaged by the induced voltage.
- 12AWG Harness - The wires which come with this relay socket are 12AWG/16AWG design, the 12 awg wires include red, blue and yellow wires which are the wires for high power terminals of the spdt relay; and 16 awg white and black wires for the coil terminals.
- Waterproof - This 5 pin relay 12v has seal ring inside the harness socket to improve its waterproof performance, makes it much safer under moist environment use.
- Wide Application - The waterproof relay 12v acts as a bridge between switches and devices, which helps to achieve controlling high rating devices by small rating switches, suitable for auto, car, truck, marine boat, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DaierTek
Dimensions: 2.28 x 9.76 x 5.28 Inches
See On Amazon #10
AEDIKO 4pcs DC 12V Relay Module 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level
Asin: B095YFJ69T | Model: 14921 | PartNumber: 14921 | Ean: 0701715480605 | UPC: 701715480605
Optocoupler Isolation:1 Channel Relay Board Use Optocoupler Isolation That Has Strong Driving Ability And Stable Performance ,The Isolation Circuit Prevent Damages To I / O Port By Relay Switch Current.
Wide Application: Dc 12V Relay Module Works Well With Arm /Pic /Avr /Mcu/Raspberry/Cnc Machine/ Ps4 Etc..
Jumper Design: The Relay Module Has A Jumper That You Can Set Rather The Unit State Changes With High Or Low Signal. Has Screw Terminals For Relay (Nc,C,No) And For Input; Coil +, Coil - And Trigger..
Fault-Tolerant Design: Fault Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Operate;All Interfaces Of Relay Can Be Wired Out Through The Terminals Directly,Normally Open And Normally Closed.
Features
- 12V Relay Module: Working Voltage: DC 12V; Maximum Load: AC 250V/10A, DC 30V/10A; Trigger Current of Opto-Isolator: 5mA
- Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate;All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed
- Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current
- Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input; Coil +, Coil - and Trigger.
- Wide Application: DC 12V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc.
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.72 x 1.90 x 1.02 Inches
See On Amazon #11
HiLetgo 2pcs DC 12V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level Trigger Module Triggered by DC 12V
Asin: B00LW15F42 | Model: 3-01-0342 | PartNumber: 3-01-0342 | Ean: 0702082655962 | UPC: 702082655962
The Module Can Be High Or Low By A Jumper Setting Trigger;.
Fault-Tolerant Design , Even If The Control Line Is Broken , The Relay Will Not Operate ;.
Interface Design Humane, All Interfaces Can Be Connected Directly Via Terminal Wiring Leads , Very Convenient ;.
With Patch Optical Isolation, Strong Drive Ability And Stable Performance;.
Features
- Can set high or low level trigger with jumper, to meet the demand of more trigger applications;
- With patch optical isolation, strong drive ability and stable performance;
- The module can be high or low by a jumper setting trigger;
- Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient ;
- Fault-tolerant design , even if the control line is broken , the relay will not operate ;
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Dimensions: 0.72 x 2.00 x 1.60 Inches | Weight: 0.11 Pounds
See On Amazon #12
Hamolar 2 Pack 12V DC 120A Starter Relay Switch Car Heavy Duty Split Charge Continuous Duty 4 Terminal SPST Relays for Truck Boat Marine
Asin: B096QH9DF1 | Model: RD-120 | PartNumber: RD-120 | Ean: 0721703426538 | UPC: 721703426538
High 120A Coil Capacity- Able To Handle Those High Current Applications With Ease, Heavy Duty Make Or Break (On/Off) Relay..
Relay Kit Made By High-Grade Flame Retardant Materials To Ensure Superior Quality And Long Lifespan. 2 Years Warranty..
We Are Equipped With Terminal And Gaskets To Make Installation Simple And Easy..
Function: 12Vdc (14V Max) 4-Pin Spst (Single Pole Single Throw) Relay With 120A High Switching Capability. Perfect For Split Charging Or Various Automotive Applications..
Features
- The 12v relay uses high-quality alloy terminals, and the internal contacts are silver-plated. Durable & Firm & Stable Contact Load: High Power Ideal for universal 12V applications.
- Function: 12VDC (14V Max) 4-Pin SPST (Single Pole Single Throw) Relay with 120A High Switching Capability. Perfect for Split Charging or Various Automotive Applications.
- High 120A coil capacity- able to handle those high current applications with ease, Heavy duty make or break (on/off) relay.
- We are equipped with terminal and gaskets to make installation simple and easy.
- Relay kit made by high-grade flame retardant materials to ensure superior quality and long lifespan. 2 Years Warranty.
- See more on Amazon...
Brand: Hamolar | Manufacturer: Hamolar
See On Amazon #13
HiLetgo 12V 1 Channel Relay Module with Optocoupler Isolation Support High or Low Level Trigger
Asin: B00LW15D1M | Model: 3-01-0341 | PartNumber: 3-01-0341 | Ean: 0702082655955 | UPC: 702082655955
Module Can Be Set By Jumper High Or Low Trigger.
The Interface Design Of Human Nature, All Interfaces Are Available Through A Direct Connection Terminal Leads, Very Convenient.
Fault-Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move.
Using Optocoupler Chip Isolation, Strong Drive Capability, Stable Performance; Trigger Current 5Ma.
Features
- Module uses genuine high quality relay, normally open interface maximum load: AC 250V / 10A, DC 30V / 10A
- Using optocoupler chip isolation, strong drive capability, stable performance; trigger current 5mA
- Module can be set by jumper high or low trigger
- Fault-tolerant design, even if the control line is broken, the relay will not move
- The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #14
Gebildet 12V Fuse Relay Switch Harness Set - 30A ATO/ATC Blade Fuse, 4-Pin SPST Automotive Electrical Relays with Heavy Duty 12 AWG Wires (Pack of 3)
Asin: B07TV9M1QR | Ean: 8431248938206
Upgraded Version - Automotive Relays Built In Fuse Socket With Included 30A Blade Fuse, No Need Of A Separate Fuse Holder, Saving Space And Money. Heavy Duty 12Awg Wires For Main Contact..
Wide Application - Wide Range Of Use, Greatly Used For Car Lights, Fog Lamps, Wiper, Starter, Fans, Speakers, Traction Control Systems, Etc..
Good Construction - 12V Dc (Max14v Dc) And 30A High Switching Capability. Bosch Style 4-Pin Spst (Single Pole Single Throw) Relay. Metal Mounting Bracket On The Electrical Relay Promotes Easy Installation..
Neat Mounting Design - The Interlocking Design Of Unique Male-Female Slot On Each Socket Edge, Easy To Connect All Relays Together, Offering Clean And Neat Installation..
Features
- Easy Wiring - The relay sockets come with color-labeled wires for loads/accessories convenient wiring. Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87).
- Neat Mounting Design - The interlocking design of unique male-female slot on each socket edge, easy to connect all relays together, offering clean and neat installation.
- Upgraded Version - Automotive relays built in fuse socket with included 30A blade fuse, no need of a separate fuse holder, saving space and money. Heavy duty 12AWG wires for main contact.
- Good Construction - 12V DC (Max14V DC) and 30A High Switching Capability. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay. Metal mounting bracket on the electrical relay promotes easy installation.
- Wide Application - Wide range of use, greatly used for car lights, fog lamps, wiper, starter, fans, speakers, traction control systems, etc.
- See more on Amazon...
Brand: Gebildet | Manufacturer: Gebildet
See On Amazon #15
Tnisesm 2PCS Power Relay DC12V Coil, 30A SPDT(1NO 1NC) 120 VAC with Flange Mounting and 10 Quick Connect Terminals Wires Mini Relay NT90-DC12V-10X
Asin: B087G3M364 | Model: NT90-DC12V-10X | PartNumber: NT90-DC12V-10X
Easy To Use: Attached With Crimping Terminals Wires For Worry-Free Installation..
Package Content : 2 X Power Relay + 10 X Terminal Wire.
Epoxy Sealed Versions Available.
Coil Voltage : Dc 12V; 30A Spdt 240Vac.
Features
- Product Type: Power Relay with Terminal Wires; SPDT(1NO 1NC)
- Coil Voltage : DC 12V; 30A SPDT 240VAC
- Easy to use: Attached with crimping terminals wires for worry-free installation.
- Epoxy sealed versions available
- Package Content : 2 x Power Relay + 10 x Terminal Wire
- See more on Amazon...
Brand: Tnisesm | Manufacturer: Tnisesm
See On Amazon #16
mxuteuk 2pcs JQX-13FL DC 12V Coil 8 Pin 10A DPDT LED Indicator Electromagnetic Power Relay, with Base, with DIN Rail Slotted Aluminum
Asin: B07QXXM1RV | Model: JQX-13FL-DC12V | PartNumber: JQX-13FL-DC12V | Ean: 0741416011456 | UPC: 741416011456
Coil Voltage:Dc 12V; Contact Capacity: 10A 250Vac/10A 28Vdc;.
Package Content : 2 X Power Relay + 2 X Socket + 1 X Rail Slotted Aluminum + 2 X Screw.
Overall Size(Approx. ): 79 X 28 X 64Mm/3.1" X 1.1" X 2. 5"(L*W*H).
Mount Rail Type : 35Mm Din Rail; Din Rail Length : 100Mm/4"(L).
Features
- Product Name:Electromagnetic Power Relay; Relay Model : JQX-13FL; Type : DPDT(2NO 2NC); Number of Terminals : 8 ; Socket Model : PTF08A-E
- Mount Rail Type : 35mm DIN Rail; DIN Rail length : 100mm/4(L)
- Coil Voltage:DC 12V; Contact Capacity: 10A 250VAC/10A 28VDC;
- Overall size(approx. ): 79 x 28 x 64mm/3.1 x 1.1 x 2. 5(L*w*h)
- Package Content : 2 x Power Relay + 2 x Socket + 1 x Rail Slotted Aluminum + 2 x Screw
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
See On Amazon #17
irhapsody 4-pin 80/60AMP 12VDC Waterproof Relay with Harness Kit, Heavy Duty 12 AWG Tinned Copper Wires, 1 Pack SPST Automotive Relay
Asin: B08D8T9X9R
For The People Whose Relays Are Burning, Please Make Sure You Are Making Tight Connections (Especially On The Load Wires), Read The Specs On The Item Description, And Ensure That The Operating Environment Meets The Safety Requirements Of The Relay.
Thick 12 Gauge Wire For The Load Terminals. Easy To Install Just Make Sure You Follow The Wiring Diagram. Works For Both Positive And Negative Activation.
Be Careful When Inserting The Relay Into The Socket. If You Force It, You Will Bend The Female Connectors.
12-Volt 4-Prong Relay. Excellent Water-Repellent And Dustproof Ability, But Not Using It In Water.
Features
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 4-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- For the people whose relays are burning, please make sure you are making tight connections (especially on the load wires), read the specs on the item description, and ensure that the operating environment meets the safety requirements of the relay
- Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
- Thick 12 gauge wire for the load terminals. Easy to install just make sure you follow the wiring diagram. Works for both positive and negative activation
- See more on Amazon...
Brand: iRhapsody | Manufacturer: IRHAPSODY
Warranty: 1 year
See On Amazon #18
Hosyond 5 Pack 12V DC 40/30 AMP Waterproof Relay Harness Tinned Copper Wires 5-PIN SPDT Automotive Relay Car Relay
Asin: B0C6TR9L2S | Ean: 0732214748200 | UPC: 732214748200
Pure Copper Core Cable, Tinned Brass Pins, With Higher Conductivity And More Stable Performance. 3*14 Awg And 2*18 Awg, Length: 5 Inches..
The Relay Kit Is Made Of High-Grade Flame-Retardant Materials To Ensure Safe Use And Long Service Life..
Wire Sizes: White - Ground (85), Blue - Vdc (30), Black - Trigger (86), Red - Output N/C (87A) And Yellow - Output N/O (87)..
The Relay Harness Is Encapsulated With A Rubber Ring, Which Is Waterproof And Dustproof. Fixed Metal Holes For Easy Installation..
Features
- 12VDC (14V max) waterproof 5-pin SPDT (Single Pole Double Throw) pure copper coil relay with 40A/30A high switching capability.
- The relay harness is encapsulated with a rubber ring, which is waterproof and dustproof. Fixed metal holes for easy installation.
- Pure copper core cable, tinned brass pins, with higher conductivity and more stable performance. 3*14 AWG and 2*18 AWG, Length: 5 inches.
- Wire Sizes: White - Ground (85), Blue - VDC (30), Black - Trigger (86), Red - Output N/C (87a) and Yellow - Output N/O (87).
- The relay kit is made of high-grade flame-retardant materials to ensure safe use and long service life.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Dimensions: 1.40 x 7.90 x 1.70 inches
See On Amazon #19
HiLetgo 12V 4 Channel Relay Module with OPTO-Isolated Support High and Low Level Trigger
Asin: B00LW2GM84 | Model: 3-01-0371 | PartNumber: 3-01-0371 | Ean: 0702082656167 | UPC: 702082656167
High And Low Level Trigger.
Using Smd Optocoupler Isolation.
Features
- HiLetgo 12V 4 Channel Relay Module
- Using SMD OPTOCOUPLER isolation
- High and Low Level Trigger
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #20
TWTADE/JQX-12F-2Z DC 12V Coil Voltage 30A DPDT 2NO+2NC General Purpose High Power Relay 8 Pin (Quality assurance for 1 years)
Asin: B07FCL6MQY | Model: JQX-12F-2Z DC12V | PartNumber: JQX-12F-2Z DC12V | Ean: 0673257216557 | UPC: 673257216557
Body Size(Not Included Pin) : 3.5 X 3.3 X 4Cm / 1.4" X 1.3" X 1.6" (L * W * T);Total Height : 4.8Cm / 1.6";Installing Hole Size : 0.48 X 0.35Cm / 0.19"X 0.14"(L*W).
Weight : 93G;Package Content : 1 X Power Relay.
Installing Hole Distance(Center) : 3.85 X 3.78Cm / 1.52" X 1.49"(L*W);Material : Plastic, Metal;Color : See The Picture.
Wiring Description For Example: 1,3,5 This Contact, 3 And 5 Are Normally Open, 1 And 5 Are Normally Closed;Pin Number : 8; Coil Voltage : Dc 12V; Contact : 30A 250V Ac / 28V Dc.
Features
- Product Name : Power Relay;Model : JQX-12F-2Z; Contact : DPDT 2NO+2NC
- Wiring description For example: 1,3,5 This contact, 3 and 5 are normally open, 1 and 5 are normally closed;Pin Number : 8; Coil Voltage : DC 12V; Contact : 30A 250V AC / 28V DC
- Body Size(not included pin) : 3.5 x 3.3 x 4cm / 1.4 x 1.3 x 1.6 (L * W * T);Total Height : 4.8cm / 1.6;Installing Hole Size : 0.48 x 0.35cm / 0.19x 0.14(L*W)
- Installing Hole Distance(center) : 3.85 x 3.78cm / 1.52 x 1.49(L*W);Material : Plastic, Metal;Color : See the Picture
- Weight : 93g;Package Content : 1 x Power Relay
- See more on Amazon...
Brand: TWTADE | Manufacturer: TWTADE
See On Amazon
Looking For Something Else?
Search