Sucicago Boat Fuel Tank Sending Unit 16"(410mm) Fuel Sender Float Marine Stainless Steel Fuel Gauge Sending Unit Water Tank Sending Unit RV Tank Sensor Replacement for Car Truck Vehicle 0-190 ohm

Asin: B0C3GQ5KMQ   |   Model: XQ190-C16   |   PartNumber: XQ190-C16   |   Ean: 0794697473352   |   UPC: 794697473352

---

 ...click image to see more on Amazon

[Stainless Steel Stem And Flange］Well Built And Sealed, Sae 5 Hole Mounting Pattern ( Not Equidistant ).Note The Hole Pattern On The Sucicago Marine Fuel Sending Unit Is Not Evenly Spaced. And There Is Only One Way To Allign The Gasket.
.
［Really Important To Know Before You Order］ 1) To Allow The Sender Not Hit The Bottom Of The Tank, The Length Of Sender Should Be 1" Less Than The Depth Of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth Of The Tank If Tank Is Metal . 2)The Diameter Of Float Is 1.38"(35Mm). If You Have To Drill The Hole, Diameter 1.50"(38Mm) Hole Would Be Perfect.Sucicago Fuel Senders Are Not Linear.
.
［15 Minutes To Remove The Old One And Install The New One. ］Easily Understood Wiring Instructions,1Pc Of Nbr Gasket(1Pc), 5Pcs Of Sus M5 Mounting Screws,4Pcs Of Quick Wiring Terminals. Includes Everything You Need In The Package To Make The Replacement With Ease. You Will Know How Much Fuel, Diesel,Gasoline Or Water Left On Your Boat/Truck/Camper! Signal Output: 0-190Ohm
.
[A Good Resolution ］We Received Feedback From Customers Who Said The Smaller Sending Units As A Short Tank Requires Higher Sensitivity Than The Taller Tanks Do.Our R&D Has Redesigned :10Mm Resolution Range : 4”,5”,6”,7”. 21Mm Resolution Range: 8”,9”,10”,11”,12”,13”,14”,15”,16,17”,18”,19,20”.The Sucicago Fuel Sender Gives A Nice Smooth Gauge Reading.
.

Brand: Sucicago   |   Manufacturer: Sucicago direct

Similar To Sucicago Boat Fuel Tank Sending

Attwood 8806LP2 Epa Certified 6 gallon Portable Fuel Tank, Red

Asin: B0053HOX4O   |   Model: 8806LP2   |   PartNumber: 8806LP2   |   Ean: 0022697086624, 0656166478971   |   UPC: 656166478971, 022697086624

---

 ...click image to see more on Amazon

Cap With Built-In Vacuum Valve Means No Need For Manual Venting.
Complies With All Abyc/Nmma Requirements For Portable Marine Fuel Tanks.
Meets Epa And Carb (California Air Resources Board) Regulations.

First Available: 01/01/2018

Brand: Attwood   |   Manufacturer: Attwood

Dimensions: 19.25 x 9.37 x 13.25 inches   |   Weight: 1.17 pounds

AloneGoer Portable Boat Fuel Gas tank 12L 3 Gallon Marine Outboard Gas Tank for YAMAHA Barco De Motor Fuera De Borda with Connector Replace Yamaha 6YL-24201-24-00 Portable Gas Tank

Asin: B09QXKS1LM   |   Model: 6L Portable Boat Fuel Tank   |   PartNumber: 6L Portable Boat Fuel Tank

---

 ...click image to see more on Amazon

※ Fuel Tank Capacity： 3 Gallons；Most People Would Say It's A 12 Liter Gas Tank, But It's Only Suitable For 11.3 Liters..
※ Please Check The Machine Model Number And Part Number Before Purchase To Ensure That The Purchased Parts Are Suitable For Your Equipment..
※ Standard Nozzle: Used For The Interface Of Outboard Engine (More Than 6 Hp) From The Rear Hole.
※ Specification Of 12L Fuel Tank: Length 36.5Cm(14.37Inch), Width 27.5Cm(10.83Inch), Height 26Cm(10.24Inch), Weight About 1.4Kg, Thickness 2Mm..
※ Screw Cap With A Vent,Can Adjust The Air Pressure Balance.
※ 12L 3Gallon Fuel Tank Made Of Uv Resistant Stable Plastic (Polyethylene),Light Weight,Easy To Carry,Safe And Durable.

Brand: AloneGoer   |   Manufacturer: AloneGoer

Dimensions: 10.24 x 14.37 x 10.83 inches   |   Weight: 3.09 pounds

attwood 8803LP2 EPA and CARB Certified 3-Gallon Portable Marine Boat Fuel Tank

Asin: B0053HOWFY   |   Model: 8803LP2   |   PartNumber: 8803LP2   |   Ean: 0022697088031   |   UPC: 022697088031

---

 ...click image to see more on Amazon

Compatible With ¼-Inch Npt Fuel Fittings.
Complies With All Abyc/Nmma Requirements For Portable Marine Fuel Tanks.
Meets Epa And Carb (California Air Resources Board) Regulations.
Cap With Built-In Vacuum Valve Means No Need For Manual Venting.

First Available: 01/01/2018

Brand: Attwood   |   Manufacturer: Attwood

Dimensions: 16.50 x 7.37 x 11.00 inches   |   Weight: 0.37 Pounds

Scepter 10511 Rectanglular 6 Gallon Under Seat Portable Marine Fuel Tank With Handle, 19-Inches x 12-Inches x 10-Inches, Red

Asin: B01BNBCRRS   |   Model: 10511   |   PartNumber: 10511   |   Ean: 0063923105115   |   UPC: 063923105115

 ...click image to see more on Amazon

Molded From Uv Stabilized, High Density Polyethylene For Long Life Automatic Air Inflow Valve/Fuel Cap System Works With Gasoline And Ethanol Blended Fuels Made In Canada.
Accepts Standard 1/4 Npt Marine Tank Fittings.
Works With Gasoline And Ethanol Blended Fuels Made In Canada.
Rugged One-Piece, Tank Shell Construction Designed To Reduce Fuel Evaporation And Retains Octane Value For Longer Periods Easily Carry Under Seat Portable Fuel Tank From Your Boat To The Dock With Integrated Top Handle Convenient Combination Fuel Pick-Up/Sight Gauge Accepts Standard 1/4 Npt Marine Tank Fittings.

First Available: 01/01/2023

Brand: Scepter   |   Manufacturer: Scepter Marine

Dimensions: 10.10 x 19.10 x 12.30 inches

Warranty: 1 Year

SEACHOICE 15461 Marine 6-Inch to 12-Inch Gas or Diesel Fuel Electric Sending Unit Kit

Asin: B002IZBLEO   |   Model: 15461   |   PartNumber: 15461   |   Ean: 0719249154619   |   UPC: 719249154619

---

 ...click image to see more on Amazon

Can Be Used For Gas Or Diesel.
Includes Mounting Screws And Gasket.
Manufacturer Part Number 50-15461.
Compatible With 35 To 240 Ohm Gauges.
Suitable Tank Depth: 6 To 12 Inches.

First Available: 10/04/2018

Brand: SEACHOICE   |   Manufacturer: Seachoice

Dimensions: 17.75 x 6.75 x 2.50 inches   |   Weight: 0.50 pounds

Warranty: http://www.seachoice.com/warranty-information

Moeller Marine 035722-10, Fuel Tank Sending Unit, Electric 6 to 12 Inch Tank Depth

Asin: B000MTI15K   |   Model: 035722-10   |   PartNumber: 035722-10   |   Ean: 0039729722108, 0739729722107   |   UPC: 739729722107, 039729722108

 ...click image to see more on Amazon

Internal Components Will Not Rust Or Corrode.
Complete With 5 Hole Gasket And Screws.
Requires Connection To A Dash Mounted Gauge.

First Available: 01/19/2007

Brand: Moeller   |   Manufacturer: Moeller Marine Products

Dimensions: 5.75 x 16.25 x 12.00 Inches   |   Weight: 0.20 pounds

Warranty: Manufacturer

Attwood 8806LPG2S Portable Marine Boat Fuel Tank, EPA-Certified - 6-Gallon - with Fuel Gauge

Asin: B00BDQLCMA   |   Model: 8806LPG2S   |   PartNumber: 8806LPG2S   |   Ean: 0022697088062   |   UPC: 022697088062

---

 ...click image to see more on Amazon

Meets Epa And Carb (California Air Resources Board) Regulations.
This Tank Has A Built-In Fuel Gauge.
Tank Dimensions: 19.82" L X 13.50" W X 9.16" H.
Complies With All Abyc/Nmma Requirements For Portable Marine Fuel Tanks.
Cap With Built-In Vacuum Valve Means No Need For Manual Venting.

First Available: 01/01/2018

Brand: Attwood   |   Manufacturer: Attwood

Dimensions: 9.16 x 19.82 x 13.50 inches   |   Weight: 1.17 pounds

Dorman 55818 Universal Fuel Level Sending Unit Kit

Asin: B019CXVE9G   |   Model: 55818   |   PartNumber: 55818   |   Ean: 0037495558181   |   UPC: 037495558181

 ...click image to see more on Amazon

Factory Oem Fit Form And Function.

First Available: 07/12/2016

Brand: Dorman   |   Manufacturer: Dorman Products

Dimensions: 16.54 x 2.76 x 2.85 Inches   |   Weight: 0.75 pounds

Warranty: Limited Lifetime Warranty

AODITECK Fuel Sending Unit Gasket Fuel Sender Gasket Marine Fuel Sender Gasket Gasket Kit (NBR) for Marine Fule Sending Unit, Boat Fuel Tank Sender, Fuel Sender Unit for Vehicles

Asin: B093YC3DGG   |   Model: ScrewYFZ1   |   PartNumber: ScrewYFZ1   |   Ean: 0757842002395   |   UPC: 757842002395

---

 ...click image to see more on Amazon

3. It's Designed For Top Mounting In Plastic Or Metal Fuel Tank On All Type Of Marine Vessel.
2. Matched The Original Holes Perfectly. Good To Have When Replacing Sender.

Brand: AODITECK   |   Manufacturer: Aoditect Direct

RUPSE Fuel Sender Unit Boat Fuel Tank Sending Unit Fuel Water Level Sensor Stainless Steel Fuel Sender and Fuel Gauge for Boat Car Truck RV (6.8"(175mm))

Asin: B09PZYKYCL   |   Model: 03CE30GMAU001   |   PartNumber: 03CE30GMAU001   |   Ean: 0192032001039   |   UPC: 192032001039

---

 ...click image to see more on Amazon

[Easy Installation]: Sae 5 Hole Mounting Pattern, Nbr Material Gasket, Good Sealing Performance, High Oil Resistance, With M5 5 Screws, 10 Quick Wiring Terminals, Easy And Quick Installation By Referring To The Wiring Diagram..
[Multi-Size]: Various Sizes Can Be Selected To Meet Different Sizes Of Fuel Tanks For Automobiles, Ships, Yachts, Rv, Agricultural Vehicles And Industrial Equipment..
[Easy To Read]: The Fuel Level Gauge Has 8 Adjustable Backlight Colors, Ip67 Waterproof, Stainless Steel Frame, Anti-Fog Curved Glass, Easy To Read (Empty-1/2-Full)..

Brand: RUPSE   |   Manufacturer: RUPSE

Dimensions: 2.00 x 13.00 x 2.00 inches

Warranty: 1year

Attwood 8812LPG2 EPA Certified 12 Gallon Portable Fuel Tank with Gauge

Asin: B006MIXFY2   |   Model: 8812LPG2   |   PartNumber: 8812LPG2   |   Ean: 0022697881243   |   UPC: 022697881243

---

 ...click image to see more on Amazon

Meets Epa And Carb (California Air Resources Board) Regulations.
Attwood Products Are Both Compatible And Reliable, Engineered And Built With A Never-Fail Attitude.
Complies With All Abyc/Nmma Requirements For Portable Marine Fuel Tanks.
Cap With Built-In Vacuum Valve Means No Need For Manual Venting.

First Available: 01/01/2018

Brand: Attwood   |   Manufacturer: Attwood

Dimensions: 14.47 x 22.75 x 14.25 inches   |   Weight: 1.45 pounds

Scepter 08576 OEM Portable 3.2 Gallon Marine Fuel Tank For Outboard Engine Boats, 14-Inches x 10-1/2-Inches, x 9-Inches, Red

Asin: B008F92HJA   |   Model: 08576   |   PartNumber: 08576   |   Ean: 0063923085769   |   UPC: 063923085769

---

 ...click image to see more on Amazon

2-Way Vented Cap – Automatic Air Inflow Valve System Allows Air To Enter Tank During Operation And Pressure To Be Released Above 5 Psi.
Convenient – Combination Fuel Pick-Up/Sight Gauge Accepts Standard 1/4 Npt Marine Tank Fittings.
Made In Canada.
Durable Construction – Crush-Resistant Design Made Of Uv-Stabilized, Rust And Corrosion-Resistant Hdpe For Maximum Durability.
Compact Design – Molded-In Feet Keep Tank Off Floor For Increased Ventilation And Stability While Slim Profile Makes For Convenient Under-Seat Storage.

Brand: Scepter   |   Manufacturer: SCEPTER

Dimensions: 9.20 x 14.30 x 10.40 inches   |   Weight: 4.49 pounds

Warranty: LIMITED WARRANTY

Moeller Marine 035728-10, Gasket for Fuel Tank Sending Unit, 5 Hole, Electric and Mechanical

Asin: B000MTI16O   |   Model: 035728-10   |   PartNumber: 035728-10   |   Ean: 5242002604731, 0739729728109, 0039729728100, 5275577392864   |   UPC: 039729728100, 739729728109

 ...click image to see more on Amazon

Ethanol Compliant.
Calibrated To The Industry Standard Of 33-240 Ohms.
Exceeds Current Nmma And Abyc Specifications.
Designed For Top Mounting In Aluminum, Plastic Or Stainless Steel Fuel Tank On All Types Of Marine Vessels.

First Available: 01/19/2007

Brand: Moeller   |   Manufacturer: Moeller

Dimensions: 0.00 x 0.00 x 0.00 inches   |   Weight: 0.10 pounds

Warranty: Manufacturer

100TECH Fuel Sending Unit 240-33 ohms 8"(200mm) Marine for Boat Vehicle Truck RV Fuel Tank Sending Unit Fuel Water Level Sending Unit Fuel Gas Sender Fuel Water Level Sensor Fuel Gauge Sending Unit

Asin: B092MVQRV2   |   Model: BY200-240   |   PartNumber: BY200-240   |   Ean: 0757842002302   |   UPC: 757842002302

---

 ...click image to see more on Amazon

[Easy To Install] The Fuel Level Sending Unit Comes With Gasket,Mounting Screws,Well-Written And Illustrated Instructions; The Wiring Instructions Are Straight Forward And Easy To Follow.
.
100Tech Guarantees With 1 Year Limited Warranty & Free Lifetime Technical Support
Attention: To Allow The Fule Sender Not Hit The Bottom Of The Tank, Please Measure From The Top Of Your Tank To The Bottom On The Outside And Subtract 1 Inch The Length Of Sender.
.
[The Size Of Float] The Diameter Of Float Is 1.38"(35Mm). If You Have To Drill The Hole, Diameter 1.50"(38Mm) Hole Would Be Perfect..
Sae 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel And Rugged Construction. Wide Application: It Could Support Fuel Level Gauge And Water Level Gauge For Boat/Auto.
.
The Fule/Water Level Sensor With American Standard Output 240-33 Ohms (240 Ohms At Empty, 33 Ohms At Full). If You Need Lengths Other Than 4"-32", Please Contact Us Directly For More Information.
.

Brand: 100Tech   |   Manufacturer: 100TECH direct

See On Amazon

  #15

3 Gallon/12L Rectangular Portable Boat Fuel Tank with Hose Connector for Marine Outboard Motor Fuel Tank - Red (1pack)

Asin: B0962V2YCB   |   Model: VEITHI   |   PartNumber: VEITHI   |   Ean: 0709226971339   |   UPC: 709226971339

---

 ...click image to see more on Amazon

Two Modes Of Sealing And Venting - There Are Two Designs Of Fuel Tank Cap, Which Can Be Sealed Or Vented, And The Metal Nut Can Be Vented And Safe To Use( High-Quality Spring Designed For Deflation. Unscrew The Yellow Metal Nut To Release The Air In The Fuel Tank. Tighten The Yellow Metal Nut And The Oil Tank Is Airtight), Which Helps To Form A Smooth Fuel Flow, Thereby Minimizing Leakage..
Large Capacity - This Outboard Motor Fuel Tank Kit Is A Full Assembly, It Includes 1Pcs Boat Fuel Tank , 1Pcs Boat Fuel Line Hose, 2 Pcs Of Ends Fuel Connectors Fittings And 1Pcs Primer Bulb. Boat Fuel Tank Large Capacity- 3 Gallon (12 L)，Diameter Of Tank Opening Is 1-1/2In, This Is An Outboard Fuel Tank That Can Be Used For Many Types Of Outboard Engines. It's Perfect For Small/Large Boats, Inflatable Boats And Kayaks..
With An Oil Volume Indicator - Helps You To Clearly Understand The Changes In The Oil Tank And The Remaining Oil Volume And Replenish It In Time. A Filter Is Built Into The Air Inlet Of The Boat Fuel Tank To Ensure Clean Fuel..
Convenient To Carry And Place - The Outboard Motor Fuel Tank Equipped With An I-Shaped Lifting Handle, Which Is More Ergonomic, Easy To Carry And Store，Rust Protection, Strong, Beautiful, Easy To Use Handle Design, Light Weight And Portable, Convenient To Place And Carry..

Features

• Material - Boat fuel tank 3 gallon is made of high-density polyethylene as the base material anti-aging, impact resistance, corrosion resistance . It can naturally rebound without permanent deformation after encountering an impact.
• Convenient to Carry and Place - The outboard motor fuel tank equipped with an I-shaped lifting handle, which is more ergonomic, easy to carry and store rust protection, strong, beautiful, easy to use handle design, light weight and portable, convenient to place and carry.
• Two Modes of Sealing and Venting - There are two designs of fuel tank cap, which can be sealed or vented, and the metal nut can be vented and safe to use( high-quality spring designed for deflation. Unscrew the yellow metal nut to release the air in the fuel tank. Tighten the yellow metal nut and the oil tank is airtight), which helps to form a smooth fuel flow, thereby minimizing leakage.
• With An Oil Volume Indicator - Helps you to clearly understand the changes in the oil tank and the remaining oil volume and replenish it in time. A filter is built into the air inlet of the boat fuel tank to ensure clean fuel.
• Large Capacity - This outboard motor fuel tank kit is a full assembly, it includes 1pcs boat fuel tank , 1pcs boat fuel line hose, 2 pcs of ends fuel connectors fittings and 1pcs primer bulb. boat fuel tank large capacity- 3 gallon (12 L) diameter of tank opening is 1-1/2in, this is an outboard fuel tank that can be used for many types of outboard engines. It's perfect for small/large boats, inflatable boats and kayaks.
• See more on Amazon...

Brand: VEITHI   |   Manufacturer: VEITHI

Dimensions: 10.63 x 14.17 x 11.81 inches   |   Weight: 5.36 Pounds

Amazon Price: $89.99 | as of 05/20/2024 (8:44am pst) *DETAILS
List Price: $99.99

See On Amazon

  #16

17 Gallon Street Rod Aluminum Fuel Cell Tank, Marine Fuel Tank with Sending Unit Level Sender Racing Drift Fuel Cell Tank Gas Tank for Street Truck, Jeep, Boat

Asin: B0CQ4KHXZB   |   Model: Silver   |   PartNumber: Silver   |   Ean: 0796713592245   |   UPC: 796713592245

---

 ...click image to see more on Amazon

★12 Bolt 1.75" Fill Neck With Cap Or You Can Remove The Cap And Install A 1 3/4" Hose To Use It As A Remote Fill If Desired..
★Great For Use In Street Rods, Hot Rods, Street Trucks, Jeeps, Etc..
★Built In Fuel Sending Unit (For Use Of 0 To 90 Ohm Gauge).
★8 An Fuel Pickup; 8 An Rollover Vent; 8 An Fuel Return..

Features

• 17 gallon fuel cell, Natural aluminum color, Tig-welded 5051 strong lightweight aircraft aluminum alloy.
• 8 AN fuel pickup; 8 AN rollover vent; 8 AN fuel return.
• 12 bolt 1.75 fill neck with cap or you can remove the cap and install a 1 3/4 hose to use it as a remote fill if desired.
• Built in fuel sending unit (for use of 0 to 90 ohm Gauge)
• Great for use in street rods, hot rods, street trucks, jeeps, etc.
• See more on Amazon...

Brand: DADIANPU   |   Manufacturer: DADIANPU

Dimensions: 7.00 x 30.00 x 17.00 inches

Warranty: One year warranty

Amazon Price: $89.99 | as of 05/20/2024 (8:44am pst) *DETAILS

See On Amazon

  #17

240-33 ohms 9"(225mm) Fuel Level Sending Unit for Marine Boat Truck Car Fuel Water Level Gauge Sensor Stainless Steel Fuel Gas Tank Sender 5 Hole

Asin: B09DL1QKB8   |   Ean: 0736564040861   |   UPC: 736564040861

---

 ...click image to see more on Amazon

Length Range: 220Mm 225Mm; 250Mm ; 275Mm. Output Signal Is 240~33Ohm. Resolution Range Is 21Mm. The Plastic Fuel Tank Chooses This Kit To Be 1" Smaller Than The Fuel Tank Depth, And The Metal Fuel Tank Chooses This Kit To Be 0.5" Smaller Than The Fuel Tank Depth..
Package Include: 1X Level Sensor, 5 X M5 Mounting Screws, 1X 2Mm Nbr Gasket And Wiring Installation Instructions. Order Now And Get Hassle-Free Return And Money Back Policy, Buy With Confidence! Any Questions About Our Product, Please Contact Us By Email..
Install Methods: The Water Level Gauge Sensor Is Standard Sae 5 Hole Pattern. Red-Brown Wire For Positive And Blue For Negative. Easy To Install And Connect..
Material: The Fuel Level Sending Unit Is Made Of Heavy Duty 316 Stainless Steel, Anti-Vibration, Anti-Explosion Funtion, Durable For Long Service Life..

Features

• Wide Applications: The fuel level sensor supports fuel level gauge and water level gauge. Suitable for fuel, water tanks and any kinds of liquids without impurities and use for marine, truck, cars and boats, etc.
• Material: The fuel level sending unit is made of heavy duty 316 stainless steel, anti-vibration, anti-explosion funtion, durable for long service life.
• Length Range: 220MM 225MM; 250MM ; 275MM. Output signal is 240~33ohm. Resolution range is 21mm. The plastic fuel tank chooses this kit to be 1 smaller than the fuel tank depth, and the metal fuel tank chooses this kit to be 0.5 smaller than the fuel tank depth.
• Install Methods: The water level gauge sensor is standard SAE 5 hole pattern. Red-brown wire for positive and blue for negative. Easy to install and connect.
• Package Include: 1x level sensor, 5 x M5 mounting screws, 1x 2mm NBR gasket and wiring installation instructions. Order now and get hassle-free return and money back policy, buy with confidence! Any questions about our product, please contact us by email.
• See more on Amazon...

Brand: EMIHO   |   Manufacturer: EMIHOus

Amazon Price: $27.99 | as of 05/20/2024 (8:44am pst) *DETAILS

See On Amazon

  #18

PTNHZ Universal Fuel Level Gauge w/Sending Unit Sensor 12V 240-33ohm 2-1/16" 52mm E-1/2-F Pointer LED Backlight Fuel Tank Meter for Auto RV Motorcycle Boat

Asin: B09X1GCCP2   |   Ean: 0783902989689   |   UPC: 783902989689

---

 ...click image to see more on Amazon

Advantages:Precise Gauge Readings With Extremely Smooth Needle Movement..
Support:At Ptnhz, If You Have Any Question About Our Product, Please Contact Us Right Away, We Can Handle Any Problems..
Material:Manufactured With Quality Metal And Plastic For Durability Under Various Driving Conditions..
Function:Reliable Replacement For An Original Part That Has Failed Due To Internal Sensor Failure..

Features

• FIT:For meet different sizes of fuel tanks for Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment.
• FUNCTION:Reliable replacement for an original part that has failed due to internal sensor failure.
• ADVANTAGES:Precise gauge readings with extremely smooth needle movement.
• MATERIAL:Manufactured with quality metal and plastic for durability under various driving conditions.
• SUPPORT:At PTNHZ, if you have any question about our product, please contact us right away, we can handle any problems.
• See more on Amazon...

Brand: PTNHZ   |   Manufacturer: PTNHZ

Amazon Price: $22.99 | as of 05/20/2024 (8:44am pst) *DETAILS

See On Amazon

  #19

16" 240-33 ohms Boat Fuel Lever Sending Unit Marine Fuel Gas Tank Level Sender Marine Fuel Level Gauge Sensor Fuel Sending Unit (400mm) for Fuel Gauge & Water Lever Gauge Water Tank Sender

Asin: B07P7PYDTC   |   Ean: 0602318075987   |   UPC: 602318075987

---

 ...click image to see more on Amazon

◼【Multiple Sizes】The Length Range Is 150Mm, 175Mm, 200Mm, 225Mm, 250Mm, 275Mm, 300Mm, 325Mm, 350Mm, 375Mm, 400Mm, 425Mm, 450Mm And 500Mm. Boat Fuel Sending Unit Output Signal: 240-33Ohm. (240 Ohms At Empty, 33 Ohms At Full). Support 240~33 Ohm Fuel Level Gauge And Water Level Gauge .(Please Choose One Length Range & Signal You Need When Placing The Order )..
◼【Package Includes】The Fuel Level Sender Comes With Gasket And Mounting Screws. Wiring Instructions Are Simple And Easy To Follow.Fuel Sending Unit Has 1 Year Factory Warranty, Every Products Needs To Go Through Strict Quality Inspection Before Leaving The Factory, If You Have Any Questions About The Product, Please Feel Free To Contact Us..
✔【Easy Installation】The Water Level Gauge Sensor Is A Standard Sae 5-Hole Type, Easy To Install And Connect.Blue Wire Is Connected To Ground (-), Brown Wire Is Connected To The Gauge Signal Wire.Operational Temperature: -40°C -+85°C. Stable Output Signal, Universal Style, Suitable For All Kinds Of Material Tanks..
✔【High Quality】Fule Tank Sending Unit Is Made Of Heavy Duty Sus316 Stainless Steel And Rugged Construction.It Is The Direct Replacement For Arm Type Sender. The Advantages Of Fuel Level Sensor Are Accurate Measurement, Long Service Life, Good Shock Resistance And Corrosion Resistance,Keep You Safe..

Features

• Wide Application The fuel sending unit is suitable for automobiles, ships, speedboats, engines, generator sets, engineering machinery, agricultural machinery, modified vehicles and other fields, and without limitation of environment.
• High Quality Fule Tank Sending Unit is made of heavy duty SUS316 Stainless Steel and rugged construction.It is the Direct Replacement for Arm Type sender. The advantages of fuel level sensor are accurate measurement, long service life, good shock resistance and corrosion resistance,keep you safe.
• Multiple Sizes The length range is 150MM, 175MM, 200MM, 225MM, 250MM, 275MM, 300MM, 325MM, 350MM, 375MM, 400MM, 425MM, 450MM and 500MM. Boat fuel sending unit Output signal: 240-33ohm. (240 ohms at empty, 33 ohms at full). Support 240~33 ohm Fuel Level Gauge and Water Level Gauge .(PLEASE choose one length range & signal you need when placing the order ).
• Easy Installation The water level gauge sensor is a Standard SAE 5-hole type, Easy to install and connect.Blue wire is connected to ground (-), Brown wire is connected to the gauge signal wire.Operational Temperature: -40 C -+85 C. Stable output signal, universal style, suitable for all kinds of material tanks.
• Package Includes The fuel level sender comes with gasket and mounting screws. Wiring instructions are simple and easy to follow.Fuel sending unit has 1 year factory warranty, every products needs to go through strict quality inspection before leaving the factory, if you have any questions about the product, please feel free to contact us.
• See more on Amazon...

Brand: Geloo   |   Manufacturer: Hot car parts

Dimensions: 2.50 x 17.80 x 4.30 inches   |   Weight: 0.85 pounds

Amazon Price: $35.88 | as of 05/20/2024 (8:44am pst) *DETAILS

See On Amazon

  #20

Fuel Tank Sending Unit 240-33 ohms 7"(180mm) for Marine Boat Vehicle Truck RV Fuel Water Level Gauge Sending Unit Fuel Gas Sender Stainless Steel Gas Sensor

Asin: B0CCDDFZ6M

---

 ...click image to see more on Amazon

Wide Application: The Fule Tank Sending Unit Is Suitable For Boat, Auto,Trucks, Buses And Marine. It Could Support Fuel Level Gauge And Water Level Gauge For Boat/Auto..
Note: Please Kindly Pay Attention To The Product Description, Especially The Resolution And Length Before Placing The Order..
Easy To Install: The Fuel Level Sending Unit Is Equipped With Gaskets, Installation Screws, And Good Written And Illustrated Instructions..
Features: Signal Output: 240 Ohms-33 Ohms. Resolution Of 7" Fuel Sending Unit Is 10Mm..

Features

• High Quality Material: Fuel tank sending unit is made with heavy duty 316 stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. No Adjustment Needed for Tank.
• Features: Signal Output: 240 ohms-33 ohms. Resolution of 7 Fuel Sending Unit is 10mm.
• Wide Application: The Fule Tank Sending Unit is suitable for Boat, Auto,Trucks, Buses and Marine. It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto.
• Easy to Install: The fuel level sending unit is equipped with gaskets, installation screws, and good written and illustrated instructions.
• Note: Please kindly pay Attention to the Product Description, Especially the Resolution and Length Before Placing the Order.
• See more on Amazon...

Brand: Seweder   |   Manufacturer: Ducpuve

Dimensions: 2.20 x 10.50 x 5.20 inches

Amazon Price: $27.99 | as of 05/20/2024 (8:44am pst) *DETAILS

See On Amazon






Looking For Something Else? Search