Oscilloscope 3 in 1 Handheld Oscilloscope, DDS Signal Generator and Transistor Tester, 500Khz Bandwidth 10MSa/s Sampling Rate, 6 Types of Waveforms, Transistors Measure
Asin: B0C3XR4N76 | Model: DSO-TC3 | PartNumber: DSO-TC3 | Ean: 0774882412007 | UPC: 774882412007
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Dso-Tc3 Transistor Tester Can Automatically Identify And Measure Various Transistors, Including Npn And Pnp Transistors, N-Channel And P-Channel Field Effect Transistors, Junction Field Effect Transistors, Diodes, Dual Diodes, Thyristors, And Resistors, Inductors, Capacitors And Other Passive Components. Automatic Detection Of Pin Definition. Automatically Analyze Nec Protocol Infrared Code..
Other Functional Modes: Including Circuit Continuity Test, 0~40V Input Voltage Measurement, Pwm Output, 0~32V Regulated Diode Measurement, Ds18b20 Temperature Sensor Measurement, Dht11 Temperature And Humidity Sensor Measurement. Six Waveforms: Sine, Square, Pulse Stroke, Triangle, Ramp And Dc..
24/7 After-Sales Support: Sfinevip@Outlook.Com.
Dso-Tc3 Transistor Tester Is Especially Suitable For Fast Pairing Of Transistors, Identification Of Mixed Surface Mount And Wordless Components, And Preliminary Screening Of Small Batch Components."Mos Test" Mode Can Test Various Types Of Transistors, And Can Identify Device Type, Pin Polarity, Hfe, Turn-On Voltage, Junction Capacitance, Can Test Capacitance, Resistance, Inductance Components, Etc..
Dso-Tc3 Handheld Oscilloscope Has A Real-Time Sampling Rate Of 10Ms/S And A 500Khz Bandwidth. With Complete Trigger Function (Single, Normal, Automatic), It Can Be Used Freely For Both Periodic Analog Signals And Aperiodic Digital Signals.Equipped With Efficient One-Key Auto, The Measured Waveform Can Be Displayed Without Cumbersome Adjustment..
Features
- DSO-TC3 ingeniously integrates digital oscilloscope, electronic component tester, function signal generator and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery. Bring more practical functions to users with a small size, it also has good portability.
- DSO-TC3 handheld oscilloscope has a real-time sampling rate of 10MS/s and a 500kHz bandwidth. With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.
- DSO-TC3 transistor tester can automatically identify and measure various transistors, including NPN and PNP transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, dual diodes, thyristors, and resistors, inductors, capacitors and other passive components. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code.
- DSO-TC3 transistor tester is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.Mos Test mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance, can test capacitance, resistance, inductance components, etc.
- Other functional modes: Including circuit continuity test, 0~40V input voltage measurement, PWM output, 0~32V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement. Six waveforms: sine, square, pulse stroke, triangle, ramp and DC.
- 24/7 After-Sales Support: sfinevip@outlook.com
- See more on Amazon...
Brand: S.Fine | Manufacturer: FNIRSI
Dimensions: 4.06 x 3.11 x 4.06 inches
See On Amazon Similar To Oscilloscope 3 in 1 Handheld
#1
VEVOR Digital Oscilloscope, 1GS/S Sampling Rate, 100MHZ Bandwidth 2 Channels Portable Oscilloscope with 7-inch Color Screen, 30 Automatic Measurement Functions for Electronic Circuit Testing DIY
Asin: B0CQ7CV3DX | Model: SDS1102 | PartNumber: SDS1102 | Ean: 0197988266129 | UPC: 197988266129
Automatic Waveform Capture: The Automatic Waveform Capture Feature Eliminates The Need For Manual Calculation And Measurement, Allowing For Quick Acquisition Of Key Data. Equipped With A High-Definition 7-Inch Lcd Screen, It Can Display Clear Waveforms In Real Time..
Multi-Channel Inputs: Supports Scpi Communication And Labview Communication, With Optional Rs232 Port, Hdmi Port, Wifi Communication, Sd Card Storage, Usb Port For Lan, And More. Applications Include Electronic Circuit Debugging, Circuit Testing, Design Manufacturing, Education Training, Vehicle Maintenance, And Testing..
Versatile Mathematical Calculations: In Addition To Basic Measurement Functions, Our Oscilloscope Also Features Versatile Mathematical Calculations, Including Addition, Subtraction, Multiplication, Division, Fft, And Inversion Algorithms. It Offers 30 Automatic Measurement Functions And Supports A Customizable Measurement Menu, Making It Easy To Tackle Testing Challenges..
High Capacity Storage Analysis: To Meet Your Data Viewing And Analysis Needs, Our Portable Oscilloscope Features Independent Storage Capability, Capable Of Storing 16 Sets Of Waveform Data, Supporting Usb Storage, And Firmware Upgrades. With A Usb Interface, Power Cord Socket, And Instructional Cd, It Boasts Complete Hardware..
Features
- High Precision & Sampling Rate: Our portable oscilloscope boasts high precision and high-speed capabilities, enabling detection of a wider range of circuit signals. With sampling rates of up to 1GS/s and a bandwidth of 100MHz, along with 2 adjustable probes (1X, 10X), you can analyze and troubleshoot circuits and systems more accurately!
- High Capacity Storage Analysis: To meet your data viewing and analysis needs, our portable oscilloscope features independent storage capability, capable of storing 16 sets of waveform data, supporting USB storage, and firmware upgrades. With a USB interface, power cord socket, and instructional CD, it boasts complete hardware.
- Automatic Waveform Capture: The automatic waveform capture feature eliminates the need for manual calculation and measurement, allowing for quick acquisition of key data. Equipped with a high-definition 7-inch LCD screen, it can display clear waveforms in real time.
- Versatile Mathematical Calculations: In addition to basic measurement functions, our oscilloscope also features versatile mathematical calculations, including addition, subtraction, multiplication, division, FFT, and inversion algorithms. It offers 30 automatic measurement functions and supports a customizable measurement menu, making it easy to tackle testing challenges.
- Multi-Channel Inputs: Supports SCPI communication and LabVIEW communication, with optional RS232 port, HDMI port, WIFI communication, SD card storage, USB port for LAN, and more. Applications include electronic circuit debugging, circuit testing, design manufacturing, education training, vehicle maintenance, and testing.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 2.76 x 11.81 x 6.10 inches | Weight: 4.41 pounds
See On Amazon #2
FNIRSI 2C23T 3 in 1 Handheld Oscilloscope Multimeter DDS Generator, 2 Channels, 10MHz Bandwidth, 50MSa/s Sampling Rate, 10000 Counts, Voltage, Current, Capacitor, Resistor, Diode Test
Asin: B0CMT5WMFY | Model: 2C23T | PartNumber: 2C23T
【Signal Generator】The Maximum Waveform Output Frequency Can Reach 2Mhz And A Step Of 1Hz, And Can Output Seven Waveforms Including Sine, Square, Triangle, Full, Half, Noise, And Dc..
【Save Function】One-Click Save, Screening Function. You Can Upload The Saved Image By Connecting To Pc Via Type-C. You Can Easily Compare The Waveforms By Displaying The Reference Waveform And The Measured Waveform On The Same Screen..
【Excellent Design】The Oscilloscope Adopts Fpga+Mcu+Adc Hardware Architecture, Built-In High-Voltage Protection Module, Adopts 2.8-Inch 320*240 Resolution Hd Lcd Display, Built-In 3000Mah Rechargeable Li-Ion Battery, Standby Time Up To 6H, Type-C Interface Supports 5V/1A Power Adapter Charging..
【Multimeter Mode】4-Digit 10000 Counts. Ac Voltage: 0-750V, Dc Voltage: 0-999.9V, Dc/Ac Current: 0-9.999A, Resistance: 0-99.99Mω, Capacitance: 0-99.99Mf, Temperature: -55°C-1300°C/-67~2372℉, Diode, Continuity Measurement. An Ideal Multi-Function Meter For Professionals, Factories, Schools, Hobbyists Or Home Use..
Features
- Oscilloscope Mode 2 channel handheld oscilloscope, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32kb, maximum measurement voltage 400V, automatic measurement function, trigger function auto/normal/single, 200mv/div-10v/div vertical sensitivity, support waveform image storage and export.
- Multimeter Mode 4-digit 10000 Counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99M , Capacitance: 0-99.99mF, Temperature: -55 C-1300 C/-67~2372 , Diode, Continuity Measurement. An ideal multi-function meter for professionals, factories, schools, hobbyists or home use.
- Signal Generator The maximum waveform output frequency can reach 2MHz and a step of 1Hz, and can output seven waveforms including sine, square, triangle, full, half, noise, and DC.
- Excellent Design The Oscilloscope adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 2.8-inch 320*240 resolution HD LCD display, built-in 3000mAh rechargeable Li-ion battery, standby time up to 6H, Type-C interface supports 5V/1A power adapter charging.
- Save function one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
Dimensions: 1.40 x 6.60 x 3.40 inches | Weight: 0.65 pounds
See On Amazon #3
Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels, Grey
Asin: B06XZML6RD | Model: SDS1202X-E | PartNumber: SDS1202X-E | Ean: 0764560083070, 0784672492652, 0695087809419 | UPC: 784672492652, 695087809419, 764560083070
Irecord Length Up To 14 Mpts.
Standard Serial Bus Triggering And Decode, Supports Iic, Spi, Uart, Rs232, Can, And Lin.
Real-Time Sampling Rate Up To 1 Gsa/Use.
Features
- Country of origin : China
- Real-time sampling rate up to 1 gsa/use
- IRecord length up to 14 Mpts
- Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin
- See more on Amazon...
First Available: 04/19/2017
Brand: Siglent | Manufacturer: Siglent Technologies
Dimensions: 17.00 x 10.00 x 15.00 Inches | Weight: 5.51 pounds
See On Amazon #4
Upgraded Model 2*P6100 Probe FNIRSI 3 in1 Oscilloscope/Multimeter/DDS Signal Generator with 2 Channels, 10MHz Bandwidth, 50MSa/s Sampling Rate, 10000 Counts, Voltage, Current, Capacitor, Resistor
Asin: B0CWLLXYKT | Model: XD-2C23T | PartNumber: XD-2C23T
💠💠【Multimeter Mode】4-Digit 10000 Counts. Ac Voltage: 0-750V, Dc Voltage: 0-999.9V, Dc/Ac Current: 0-9.999A, Resistance: 0-99.99Mω, Capacitance: 0-99.99Mf, Temperature: -55°C-1300°C/-67~2372℉, Diode, Continuity Measurement. An Ideal Multi-Function Meter For Professionals, Factories, Schools, Hobbyists Or Home Use. .
💠💠【Exquisite Design With Large Capacity Battery】The Oscilloscope Applys Fpga+Mcu+Adc Hardware Architecture, Built-In High-Voltage Protection Module, And Is Equipped With 2.8-Inch 320*240 Resolution Hd Lcd Display, Built-In Rechargeable Battery Up To 3000Mah, Standby Time Up To 6H, Type-C Interface Supports 5V/1A Power Adapter Charging. .
💠💠【Data Storage Function】The Product Is User Friendly. There Is On-Click Save And Screening Function. Those Saved Images Could Be Uploaded To Pc Via Type C. .
💠💠【Signal Generator Mode】The Maximum Waveform Output Frequency Can Reach 2Mhz And A Step Of 1Hz, And Can Output Seven Waveforms Including Sine, Square, Triangle, Full, Half, Noise, And Dc. Equipped With A Built-In Dds Function Signal Generator, It Can Output 7 Types Of Function Signals, With A Maximum Output Of 2Mhz For All Signals And A Step Of 1Hz; The Output Frequency, Amplitude, And Duty Cycle Are Adjustable. .
💠💠【Oscilloscope Mode】2 Channel Handheld Oscilloscope, 10Mhz Bandwidth, Real-Time Sampling Rate 50Msa/S, Record Depth 32Kb, Maximum Measurement Voltage ±400V, Automatic Measurement Function, Trigger Function Auto/Normal/Single, 200Mv/Div-10V/Div Vertical Sensitivity, Support Waveform Image Storage And Export. .
Features
- 3 in 1 Multifuctional & Handheld The FNIRSI-2C23T has combined the functions of dual channels oscilloscope, digital multimeter and signal generator. It is handheld and easy to carry, easy for people working in maintenance and engineering industry.Whether used by professionals, factories, schools, enthusiasts, or families, it is an ideal multi-functional instrument.
- Oscilloscope Mode 2 channel handheld oscilloscope, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32kb, maximum measurement voltage 400V, automatic measurement function, trigger function auto/normal/single, 200mv/div-10v/div vertical sensitivity, support waveform image storage and export.
- Multimeter Mode 4-digit 10000 Counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99M , Capacitance: 0-99.99mF, Temperature: -55 C-1300 C/-67~2372 , Diode, Continuity Measurement. An ideal multi-function meter for professionals, factories, schools, hobbyists or home use.
- Signal Generator Mode The maximum waveform output frequency can reach 2MHz and a step of 1Hz, and can output seven waveforms including sine, square, triangle, full, half, noise, and DC. Equipped with a built-in DDS function signal generator, it can output 7 types of function signals, with a maximum output of 2MHz for all signals and a step of 1Hz; The output frequency, amplitude, and duty cycle are adjustable.
- EXQUISITE Design with Large Capacity Battery The Oscilloscope applys FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, and is equipped with 2.8-inch 320*240 resolution HD LCD display, built-in rechargeable battery up to 3000mAH, standby time up to 6H, Type-C interface supports 5V/1A power adapter charging.
- DATA storage function The product is user friendly. There is on-click save and screening function. Those saved images could be uploaded to PC via TYPE C.
- See more on Amazon...
Brand: WESTOBiG | Manufacturer: FNIRSI
See On Amazon #5
FNIRSI DSO153 2 in 1 Handheld Oscilloscope/DDS Signal Generator, Digital Portable Automotive Oscilloscope with 2.8 inch TFT, 1MHz Bandwidth, 5MS/s Sampling Rate, Trigger Function Auto/Nomal/Single
Asin: B0D2TGM82J | Model: DSO153 Plus | PartNumber: DSO153 Plus
【Easy Measurement】The Handheld Oscilloscope Is Equipped With Intelligent One-Click Automatic Configuration Function. Long Press The Auto Button To Quickly Calibrate The Baseline And Display The Measurement Waveform Without Complicated Debugging..
【Rechargeable Lithium Battery】The Portable Oscilloscope Has A Built-In 1000Mah High-Quality Lithium Battery, Supports Type-C Interface Charging, And Has A Battery Life Of About 4 Hours..
【Professional Design】The Automotive Oscilloscope Is Equipped With A 2.8-Inch High-Definition Lcd Display, 320*240 Resolution, Auto/Normal/Single Trigger Function, Suitable For Periodic Analog Signals And Non-Periodic Digital Signals..
【Dds Signal Generator】The Dds Signal Generator Can Output 14 Waveforms, And The Maximum Waveform Output Frequency Is Up To 10Khz..
Features
- Upgraded Version Oscilloscope and DDS signal generator dual mode with 1MHz High bandwidth, 5MS/s high sampling rate, 500ns-20S time base range, and can measure voltages up to 400V.
- DDS Signal Generator The DDS signal generator can output 14 waveforms, and the maximum waveform output frequency is up to 10KHz.
- Easy Measurement The handheld oscilloscope is equipped with intelligent one-click automatic configuration function. Long press the AUTO button to quickly calibrate the baseline and display the measurement waveform without complicated debugging.
- Professional Design The automotive oscilloscope is equipped with a 2.8-inch High-definition LCD display, 320*240 resolution, Auto/Normal/Single trigger function, suitable for periodic analog signals and non-periodic digital signals.
- Rechargeable lithium battery The portable oscilloscope has a built-in 1000mAh high-quality lithium battery, supports Type-C interface charging, and has a battery life of about 4 hours.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
See On Amazon #6
Handheld Digital Oscilloscope Kit - AUKUYEE 2.4"TFT Mini Portable Oscilloscope, with Power Supply and BNC-Clip Cable Probe Q15001
Asin: B07QML4LJL | Model: no | PartNumber: no | Ean: 8414743678495
Rotary Encoder - It Has Been Added The Rotary Encoder, Makes Parameter Adjustment Quicker And Easier..
What You Get - You Will Get An Assembled Oscilloscope, Bnc-Clip Cable And A Power Pupply. Detailed Operation Instructions Troubleshooting Guide And Schematic Are Also Provided..
Assembled Finished - Q15001 Oscilloscope Is An Assembled Finished Machine. Not Diy Part, It Can Be Used Directly To Avoid Assembling Welding Process Problems And Greatly Saves The Assembly Time..
Designing To Your Needs - Display And Mcu Are Mounted On The Same Board (Mainboard) To Avoid Using Inter-Board Pin-Headers. Analog Channel Is Placed On A Separate Board That Contains Most User Install Parts, So The Analog And Digital Circuits Can Be Better Separated..
Features
- UPGRADED VERSION - Please Calibrate the Oscilloscope Before Use! The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div - 20V/div. Also, this updated version can be handheld.
- DESIGNING TO YOUR NEEDS - Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
- ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment quicker and easier.
- ASSEMBLED FINISHED - Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
- WHAT YOU GET - You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.
- See more on Amazon...
Brand: AUKUYEE | Manufacturer: AUKUYEE
See On Amazon #7
FNIRSI 1013D Plus Oscilloscope - Portable Handheld Tablet Oscilloscope with 100X High Voltage Probe, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate 7" TFT LCD Touch Screen
Asin: B0BHHYMVKV
Easy To Operate: Equipped With Efficient One-Button Automatic Device. One-Click Waveform Saving And Screenshots. The Built-In 1Gb Storage Space Can Store Up To 1000 Screenshots 1000 Sets Of Waveform Data.Powerful Waveform Picture Manager Supports Thumbnail Browsing, Viewing, Detailed Viewing, Page Turning, Deletion And Waveform Zooming In, Zooming Out, Moving, Etc.
Lissajous Graphic Display & Fft Viewing: Lissajous Graphic Display Function Can Be Used To Compare The Amplitude, Frequency And Phase Of The Two Sets Of Signals. Fft Viewing Function Can Roughly Estimation Of The Harmonic Content Of The Signal..
Easily Measuring : Capacitive Screen Touch & Gesture Operation, Cursor Measurement Function, When Manually Reading Amplitude-Frequency Parameters, You Do Not Need To Read The Background Scale Unit And Quantity, And You Can Directly Get The Peak-To-Peak Value And Frequency Without Conversion..
Highly Performance: 7 Inches, 800 * 480 Resolution, Bright Colors And High Contrast. Ultra-Thin And Easy To Carry. Built-In High-Voltage Protection Module,Can Tolerate A Continuous Voltage Of Up To 400V. 6000Mah High-Performance Lithium Battery, Can Be Used Continuously For 4 Hours After Fully Charged..
Features
- Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
- Highly Performance: 7 inches, 800 * 480 resolution, bright colors and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.
- Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc
- Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.
- Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
See On Amazon #8
Upgraded DSO153 Plus 10X PRODE FNIRSI 2 in 1 Oscilloscope/DDS Signal Generator, Digital Handheld Automotive Oscilloscope 2.8 inch TFT, 1MHz Bandwidth, 5MS/s Sampling Rate, Auto/Nomal/Single Trigger
Asin: B0D2TYYN2Z
✅✅【Quick Measurement】With One-Key Auto Setting Of All Parameters, It Can Quick Measure Waveform. Your Working Efficiency Would Be Highly Improved. Only Need To Long Press The Auto Button, The Baseline Would Be Quickly Calibrated. .
✅✅【Portable&Lightweight】The Size Of This Oscilloscope Is 99X68.3X19.5Mm, Which Makes It Lightweight And Easy To Carry. No Assembling Process Is Needed Because It Is Assembled Completely..
✅✅【Fashionable Design】Testing Tools Need To Be Cooler Than Before. This Is The Concept We Live Up To When We Designed Our Product.The Fnirsi Dso153 Oscilloscope Is Equipped With Built-In 1000Mah Battery. It Could Continually Work For 4 Hours After Fully Charged. You Could Use It Indoor Or Outdoor Without Worrying That The Battery Is Running Out. .
✅✅【2 In1 Dds Signal Generator】Fnirsi Dso153 Is Not Only An Digital Oscilloscope, But It Also Has The Functionality Of Signal Generator Combined. It Could Output And Display 14 Different Waveforms Including Sine, Square, Triangle, Full, Half, Noise, And Dc,Etc, And The Maximum Waveform Output Frequency Is Up To 10Khz. It Can Be Used Freely For Both Periodic Analog Signals And Non Periodic Digital Signals. .
Features
- UPGRADED VERSION OF DSO152 FNIRSI DSO153 is slightly more expensive than the previous DSO152, but it was equipped with higher functionalities. It is not only upgraded to 1MHz Bandwidth, 5MS/s Sampling Rate, 500ns-20S time base range, but with the 10X prode comes with the package, voltages up to 400V can be measured.
- 2 IN1 DDS SIGNAL GENERATOR FNIRSI DSO153 is not only an digital oscilloscope, but it also has the functionality of signal generator combined. It could output and display 14 different waveforms including sine, square, triangle, full, half, noise, and DC,etc, and the maximum waveform output frequency is up to 10KHz. It can be used freely for both periodic analog signals and non periodic digital signals.
- QUICK MEASUREMENT With one-key AUTO setting of all parameters, it can quick measure waveform. Your working efficiency would be highly improved. Only need to long press the AUTO button, the baseline would be quickly calibrated.
- FASHIONABLE DESIGN Testing tools need to be cooler than before. This is the concept we live up to when we designed our product.The FNIRSI DSO153 Oscilloscope is equipped with built-in 1000mAH battery. It could continually work for 4 hours after fully charged. You could use it indoor or outdoor without worrying that the battery is running out.
- Portable&lightweight The size of this oscilloscope is 99x68.3x19.5mm, which makes it lightweight and easy to carry. No assembling process is needed because it is assembled completely.
- See more on Amazon...
Brand: WESTOBiG | Manufacturer: FNIRSI
See On Amazon #9
FNIRSI 2C23T Digital Oscilloscope Multimeter DDS Generator 3 in 1, 2 Channels, 10MHz Bandwidth, 50MSa/s Sampling Rate, 10000 Counts, Voltage, Current, Capacitor, Resistor, Diode Test
Asin: B0CTTCVJHL | Model: 2C23T Plus | PartNumber: 2C23T Plus
【Signal Generator】The Maximum Waveform Output Frequency Can Reach 2Mhz And A Step Of 1Hz, And Can Output Seven Waveforms Including Sine, Square, Triangle, Full, Half, Noise, And Dc..
【Excellent Design】The Oscilloscope Adopts Fpga+Mcu+Adc Hardware Architecture, Built-In High-Voltage Protection Module, Adopts 2.8-Inch 320*240 Resolution Hd Lcd Display, Built-In 3000Mah Rechargeable Li-Ion Battery, Standby Time Up To 6H, Type-C Interface Supports 5V/1A Power Adapter Charging..
【Save Function】One-Click Save, Screening Function. You Can Upload The Saved Image By Connecting To Pc Via Type-C. You Can Easily Compare The Waveforms By Displaying The Reference Waveform And The Measured Waveform On The Same Screen..
【Multimeter Mode】4-Digit 10000 Counts. Ac Voltage: 0-750V, Dc Voltage: 0-999.9V, Dc/Ac Current: 0-9.999A, Resistance: 0-99.99Mω, Capacitance: 0-99.99Mf, Temperature: -55°C-1300°C/-67~2372℉, Diode, Continuity Measurement. An Ideal Multi-Function Meter For Professionals, Factories, Schools, Hobbyists Or Home Use..
Features
- Oscilloscope Mode 2 channel handheld oscilloscope, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32kb, maximum measurement voltage 400V, automatic measurement function, trigger function auto/normal/single, 200mv/div-10v/div vertical sensitivity, support waveform image storage and export.
- Multimeter Mode 4-digit 10000 Counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99M , Capacitance: 0-99.99mF, Temperature: -55 C-1300 C/-67~2372 , Diode, Continuity Measurement. An ideal multi-function meter for professionals, factories, schools, hobbyists or home use.
- Signal Generator The maximum waveform output frequency can reach 2MHz and a step of 1Hz, and can output seven waveforms including sine, square, triangle, full, half, noise, and DC.
- Save function one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen.
- Excellent Design The Oscilloscope adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 2.8-inch 320*240 resolution HD LCD display, built-in 3000mAh rechargeable Li-ion battery, standby time up to 6H, Type-C interface supports 5V/1A power adapter charging.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
Dimensions: 1.34 x 6.58 x 3.35 inches | Weight: 0.64 Pounds
See On Amazon #10
HANMATEK Handheld Digital Oscilloscope 50Mhz Bandwidth with 2 Channels HO52 3.5"TFT Mini Oscilloscope, 2 in 1 Oscilloscope and Multimeter, Backlit Screen, Auto-Calibration Function, Memory Function
Asin: B08VRDG94N | Model: HO52 | PartNumber: HO52 | Ean: 6974123430201
【Portable Oscilloscopes】: Usb Type-C Interface Supports Not Only Power Bank Power Supply, But Also Adapter Charging And Top Computer Connection. The Computer Can Read Saved Images Or Csv Waveforms, Which Is Useful For Later Viewing And Analyzing Waveforms Or For Sharing Waveform Data..
【High Quality After-Sales Service】: Weight Only 2.6Lb, Easy To Carry, Small Size, Easy To Operate. The Automotive Oscilloscope. Suitable For Students Science Lab, Engineers, And Scientists, Machine Repair, Factories, Etc. It Is A Good Lab Scope Automotive Tool. Lifetime Technical Support, Any Product Question Please Contact Us..
【Save Function】: Can Save 4 Groups Of Settings, 4 Groups Of Reference Waveforms, 4 Images, 4 Groups Of Waveforms In Csv Format. The Reference Waveform Can Be Displayed On The Same Screen As The Measured Waveform For Convenient Comparison Of The Waveform. Self-Calibration Function. Up To 6 Automatic Measurements Can Be Displayed Simultaneously On The Screen..
【Meter Mode】: 4 1/2 Digits Of The True Effective Value. 1. Standard Voltage, Current, Resistance, Diode, Continuity, Capacitance Test; 2. Auto Range Function, Convenient For Testing And Debugging; 3. The Maximum Input Voltage Is Ac 750V, Dc 1000V; 4. Independent Multimeter And Oscilloscope Input; 5. Reading The Wait Function; 6. Relative Measurement Function..
Features
- Scope Mode : 1. The waveform refresh rate is up to 10000wfms / s; 2. Oscilloscope 2 channel input, bandwidth up to 50MHZ, better signal reception. Real-time sampling rate 250MSa / s, recording length up to 8k dots; 3. Cursor measurement function; 4. 7 kinds of automatic measurement functions; 5. XY function; 6. One key automatic setting function, convenient for detecting and debugging.
- Meter Mode : 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test; 2. Auto range function, convenient for testing and debugging; 3. The maximum input voltage is AC 750V, DC 1000V; 4. Independent multimeter and oscilloscope input; 5. Reading the wait function; 6. Relative measurement function.
- Portable Oscilloscopes : USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. The computer can read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data.
- Save Function : Can save 4 groups of settings, 4 groups of reference waveforms, 4 images, 4 groups of waveforms in CSV format. The reference waveform can be displayed on the same screen as the measured waveform for convenient comparison of the waveform. Self-calibration function. Up to 6 automatic measurements can be displayed simultaneously on the screen.
- High Quality After-Sales Service : Weight only 2.6lb, easy to carry, small size, easy to operate. The automotive oscilloscope. Suitable for students science lab, engineers, and scientists, machine repair, factories, etc. It is a good lab scope automotive tool. lifetime technical support, any product question please contact us.
- See more on Amazon...
Brand: HANMATEK | Manufacturer: HANMATEK
Dimensions: 3.94 x 7.83 x 1.54 Inches | Weight: 1.00 pounds
See On Amazon #11
FNIRSI 2C53P Handheld Tablet Oscilloscope Multimeter DDS Signal Generator 3 in 1, 2CH Automotive Oscilloscope Multimeters with 50Mhz Bandwidth, 19999 Counts, 250MS/s Sampling, 4.3 inch Touch Screen
Asin: B0D3L78C6K | Model: FNIRSI-2C53P | PartNumber: FNIRSI-2C53P
【Efficiency Improvement】Automotive Oscilloscope Has Efficient One-Key Auto, Quickly Measure, Simplify Operations. Support Automatic/Normal/Single Trigger Function.Tablet Oscilloscope Suitable For Periodic Analog Signals And Non -Periodic Digital Signals..
【Long-Lasting Battery Life】The Digital Oscilloscope Has A Built-In 4000Mah Lithium Battery With A Battery Life Of About 4 Hours, And Supports Type-C Interface Charging To Ensure Uninterrupted Work..
【Comprehensive Analysis】X-Y Mode Can Be Used To Compare The Phase, Amplitude And Frequency Of Two Sets Of Signals. Fft Spectrum Analysis Can Estimate The Harmonic Content And Better Handle Complex Signals..
【Signal Generator】The Dds Signal Generator Can Output 12 Waveforms, The Maximum Waveform Output Frequency Can Reach 10Mhz.Fpga+Mcu+Adc Hardware Structure Can Ensure A Strong Waveform Capture Function. Support Waveform Preservation, View And Export Analysis..
Features
- 2 channel oscilloscope multimeter Handheld oscilloscope has 250MS/s high sampling rate, 50Mhz high bandwidth. Multimeter 19999 counts, 5 measuring values, maximum and minimum real -time display. 4.3-inch IPS ultra-high definition touch screen, 480*272 high resolution.
- Signal generator The DDS signal generator can output 12 waveforms, the maximum waveform output frequency can reach 10MHz.FPGA+MCU+ADC hardware structure can ensure a strong waveform capture function. Support waveform preservation, view and export analysis.
- Efficiency improvement Automotive oscilloscope has efficient one-key AUTO, quickly measure, simplify operations. Support automatic/normal/single trigger function.Tablet Oscilloscope suitable for periodic analog signals and non -periodic digital signals.
- Comprehensive analysis X-Y mode can be used to compare the phase, amplitude and frequency of two sets of signals. FFT spectrum analysis can estimate the harmonic content and better handle complex signals.
- Long-lasting battery life The digital oscilloscope has a built-in 4000mAh lithium battery with a battery life of about 4 hours, and supports Type-C interface charging to ensure uninterrupted work.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
See On Amazon #12
FNIRSI 1014D Oscilloscope 2 in 1 Digital Oscilloscope DDS Signal Generator, 100X High Voltage Probe, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate Built-in 1GB Storage Space
Asin: B097T5NRTZ | Model: 1014D | PartNumber: 1014D | Ean: 0616833936357 | UPC: 616833936357
Easily Measuring : Cursor Measurement Function, When Manually Reading Amplitude-Frequency Parameters, You Do Not Need To Read The Background Scale Unit And Quantity, And You Can Directly Get The Peak-To-Peak Value And Frequency Without Conversion..
Lissajous Graphic Display & Fft Viewing: Lissajous Graphic Display Function Can Be Used To Compare The Amplitude, Frequency And Phase Of The Two Sets Of Signals. Fft Viewing Function Can Roughly Estimation Of The Harmonic Content Of The Signal..
Easy To Observe : Equipped With High-Efficiency One-Button Auto, Adaptive 25%, 50%, 75% Trigger, Can Display The Measured Waveform Without Cumbersome Adjustment; The Display Is Equipped With A 7-Inch 800*480 Resolution High-Definition Lcd Screen..
Function Signal Generator : Built-In Dds Function Signal Generator And Industry's Original Chopping Output (@2.5Vpp), All Signal Frequency Steps Are 1Hz, Support 14 Kinds Of Standard Function Signals And A Customizable Chopping Signal, Chopping The Output Divice Intercepts Part Or The Whole Part Of The Complex Signals Measured By The Oscilloscope As The Output Signal Of The Signal Generator, Which Can Store Up To 1000 Customized Chopping Signals..
Features
- Professional Designed : Fnirsi oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
- Function Signal Generator : Built-in DDS function signal generator and industry's original chopping output (@2.5VPP), all signal frequency steps are 1HZ, support 14 kinds of standard function signals and a customizable chopping signal, chopping the output divice intercepts part or the whole part of the complex signals measured by the oscilloscope as the output signal of the signal generator, which can store up to 1000 customized chopping signals.
- Easily Measuring : Cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.
- Easy to Observe : Equipped with high-efficiency one-button AUTO, adaptive 25%, 50%, 75% trigger, can display the measured waveform without cumbersome adjustment; the display is equipped with a 7-inch 800*480 resolution high-definition LCD screen.
- Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
Dimensions: 5.51 x 9.84 x 2.76 inches | Weight: 3.46 pounds
Warranty: 60 day manufacturer
See On Amazon #13
Handheld Oscilloscope Multimeter Waveform Generator 12MHz Bandwidth 50MSa/s Sampling Rate USB Lab Oscilloscopes Portable 3 in 1 Automotive Digital Oscilloscope with Signal Generator Kit
Asin: B0CQYVFTHL
High-Speed Sampling Oscilloscope : With A 50Msps High-Speed Sampling Function, It Can Conduct More Accurate Quantitative Analysis Of Signals Within A 12Mhz Bandwidth..
More Power-Saving : Equipped With A Replaceable 18650 Lithium Battery And Type-C Charging Interface, It Has An Automatic Sleep Function After 15 Minutes Of No Operation, And Can Be Used Continuously For More Than 8 Hours..
Outputable Waveform Generator : Capable Of Outputting Three Waveforms: Sine Wave, Triangle Wave, And Square Wave, Which Can Be Used To Debug Electronic Equipment, Detect System Parameters, Verify And Analyze Signals, Etc..
One-Key Switching Mode : Press The "Auto" Button For 2 Seconds To Switch Modes, Which Can Quickly Convert Visual Data Waveforms..
Features
- 3 in1 : A multi-functional measuring instrument that integrates a portable 12MHz analog bandwidth oscilloscope, a 6000-code digital multimeter and a signal source.
- One-key Switching Mode : Press the AUTO button for 2 seconds to switch modes, which can quickly convert visual data waveforms.
- High-speed Sampling Oscilloscope : With a 50Msps high-speed sampling function, it can conduct more accurate quantitative analysis of signals within a 12MHz bandwidth.
- Outputable Waveform Generator : Capable of outputting three waveforms: sine wave, triangle wave, and square wave, which can be used to debug electronic equipment, detect system parameters, verify and analyze signals, etc.
- More Power-saving : Equipped with a replaceable 18650 lithium battery and Type-C charging interface, it has an automatic sleep function after 15 minutes of no operation, and can be used continuously for more than 8 hours.
- See more on Amazon...
Brand: GOCHIFIX | Manufacturer: GOCHIFIX
Dimensions: 1.30 x 6.30 x 3.30 inches | Weight: 0.44 pounds
See On Amazon #14
FNIRSI DSO-TC3 Oscilloscope - 3-in-1 Handheld Oscilloscope & DDS Signal Generator & Transistor Tester, 500Khz Bandwidth 10MSa/s Sampling Rate, 6 Types of Waveforms, Transistors Measure
Asin: B0BV9X733J | Model: DSO-TC3 | PartNumber: DSO-TC3
Dso-Tc3 Transistor Tester Can Automatically Identify And Measure Various Transistors, Including Npn And Pnp Transistors, N-Channel And P-Channel Field Effect Transistors, Junction Field Effect Transistors, Diodes, Dual Diodes, Thyristors, And Resistors, Inductors, Capacitors And Other Passive Components. Automatic Detection Of Pin Definition. Automatically Analyze Nec Protocol Infrared Code..
Other Functional Modes: Including Circuit Continuity Test, 0~40V Input Voltage Measurement, Pwm Output, 0~32V Regulated Diode Measurement, Ds18b20 Temperature Sensor Measurement, Dht11 Temperature And Humidity Sensor Measurement. Six Waveforms: Sine, Square, Pulse Stroke, Triangle, Ramp And Dc..
Dso-Tc3 Transistor Tester Is Especially Suitable For Fast Pairing Of Transistors, Identification Of Mixed Surface Mount And Wordless Components, And Preliminary Screening Of Small Batch Components."Mos Test" Mode Can Test Various Types Of Transistors, And Can Identify Device Type, Pin Polarity, Hfe, Turn-On Voltage, Junction Capacitance, Can Test Capacitance, Resistance, Inductance Components, Etc..
Dso-Tc3 Handheld Oscilloscope Has A Real-Time Sampling Rate Of 10Ms/S And A 500Khz Bandwidth. With Complete Trigger Function (Single, Normal, Automatic), It Can Be Used Freely For Both Periodic Analog Signals And Aperiodic Digital Signals.Equipped With Efficient One-Key Auto, The Measured Waveform Can Be Displayed Without Cumbersome Adjustment..
Features
- FNIRSI DSO-TC3 ingeniously integrates digital oscilloscope, electronic component tester, function signal generator and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery. Bring more practical functions to users with a small size, it also has good portability.
- DSO-TC3 handheld oscilloscope has a real-time sampling rate of 10MS/s and a 500kHz bandwidth. With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.
- DSO-TC3 transistor tester can automatically identify and measure various transistors, including NPN and PNP transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, dual diodes, thyristors, and resistors, inductors, capacitors and other passive components. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code.
- DSO-TC3 transistor tester is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.Mos Test mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance, can test capacitance, resistance, inductance components, etc.
- Other functional modes: Including circuit continuity test, 0~40V input voltage measurement, PWM output, 0~32V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement. Six waveforms: sine, square, pulse stroke, triangle, ramp and DC.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
Warranty: 60 days manufacture
See On Amazon #15
2 in 1 Handheld Oscilloscope Multimeter Professional Oscilloscope Multimeter with 2.5 Msps High Sampling Automatic Waveform Capture Function DC AC Voltagem Current Test
Asin: B08832JX4H | Model: LM2020 | PartNumber: LM2020 | Ean: 0768477385357 | UPC: 768477385357
More Accuracy -Dedicated Chip, The Automatic Waveform Capture Function, Easy Operation. The Software Calibration Technology, Memory Calibration Coefficients. Measure More Accurately. To Enable Quiet Mode (Disable Keypress Beeps), Press And Hold The "F4" Button And Then Rotate The Rotary Knob To Turn On The Instrument..
Overload Protection & Multi-Purpose - Built-In 500Ma/10A Double Protective Tube, Dual Protection Of The Instrument. Can Choose To Automatically Shutdown Or Continuous Operation, Applicable To The Workplace Such As Family, School, And Factory. Distortion Detection Also Protect Safety..
Led Backlight & Storage / Readout - Analog Broadband Range Up To: D Ac ~ 1Mhz, Display Hold, Storage / Readout Up To 10 Waveforms And 100 Sets Of Measurement Values. 240X320 Color Screen With Led Backlighting. More Clear And Suitable For Working At Night..
More Powerful Detection Range -Dc Voltage 0 ~ 1000V, Ac Voltage 0 ~ 750V, Dc/Ac Current 0 ~ 10A, Resistance 0 ~ 40Mω, Capacitance 0 ~ 100Μf, Frequency 0 ~ 5Mhz, Diode / Continuity Open Circuit Voltage 1.5V, Judgement Resistance 50Ω. Transistor Amplification Test To Meet All Test Requirements..
Features
- FASTER SAMPLING SPEED - 2.5Msps high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring.3 waveform scanning modes: automatic/conventional/single. Improve work efficiency. You will receive ET828 or LM2020, they are same product, have same function, LM2020 is our updated name.
- MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40M , Capacitance 0 ~ 100 f, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50 . Transistor amplification test to meet all test requirements.
- MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately. To enable Quiet Mode (disable keypress beeps), press and hold the F4 button and then rotate the rotary knob to turn on the instrument.
- LED BACKLIGHT & STORAGE / READOUT - Analog broadband range up to: D AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240X320 color screen with LED backlighting. More clear and suitable for working at night.
- OVERLOAD PROTECTION & MULTI-PURPOSE - Built-in 500mA/10A double protective tube, dual protection of the instrument. Can choose to automatically shutdown or continuous operation, applicable to the workplace such as family, school, and factory. DISTORTION DETECTION ALSO Protect safety.
- See more on Amazon...
Brand: LIUMY | Manufacturer: LIUMYARTISTOREGO
Weight: 0.40 pounds
See On Amazon #16
Abestop Oscilloscope 3 in 1 Functions Oscilloscope Multimeter with Waveform Generator 12MHz Bandwidth 50MSa/s Sampling Rate Signal Source Meter Tester(AT312G)
Asin: B0CCDNHVP1
Generator: Three Waveform Output Function: Sine Wave(100Hz~100Khz), Triangle Wave(100Hz~50Khz) And Square Wave(100Hz~20Khz), Can Adjust Frequency, Duty And Volt Parameter. Support Automatic Measurement Function: Vp-P, Vavg, Vrms, Hz..
Widely Use: This At312g Is A Cost-Effective Handheld Oscilloscope Multimeter With Generator, Applicable For Many Fields, Such As Primary Users, Diy Application, Home Appliance Repair, Car Maintenance, Measuring Electricity, Experimental Teaching, Etc..
Function: One Key To See The Wave Of Voltage Gear, There Are Three Waveform Scanning Modes Such As Automatic / Conventional / Single. Data Waveform Hold Function During Measurement, 100 Sets Of Data And 10 Waveforms Can Be Stored. Automatic/Manual Range Switching, Displaying Real-Time Data And Stored Data On The Same Screen..
3 In 1: Built In 12Mhz Bandwidth Oscilloscope, 6,000 Counts Digital Multimeter And Waveform Generator. Lightweight (Device: About 260G), 240X320 Color Screen And Built-In Battery. It Is A Practical & Portable Oscilloscope Multimeter..
Features
- Detection Range: DC Voltage: 0 ~ 1000V, AC Voltage: 0 ~ 750V, DC/AC Current: 0~10A, Resistance: 0 ~ 60M , Capacitance: 10nF ~ 100mF, Frequency: 1 ~ 20MHZ, Diode / Continuity open circuit voltage 2.8V, judgement resistance 50 , Fuse specification: 750mA/250V ,10A/250V
- 3 in 1: Built in 12MHz bandwidth oscilloscope, 6,000 counts digital multimeter and waveform generator. Lightweight (device: about 260g), 240x320 color screen and built-in battery. It is a practical & portable oscilloscope multimeter.
- Generator: Three waveform output function: sine wave(100HZ~100KHZ), triangle wave(100HZ~50KHZ) and square wave(100HZ~20KHZ), can adjust frequency, duty and volt parameter. Support automatic measurement function: Vp-p, Vavg, Vrms, Hz.
- Function: One key to see the wave of voltage gear, there are three waveform scanning modes such as automatic / conventional / single. Data waveform hold function during measurement, 100 sets of data and 10 waveforms can be stored. Automatic/manual range switching, displaying real-time data and stored data on the same screen.
- Widely use: This AT312G is a cost-effective handheld oscilloscope multimeter with generator, applicable for many fields, such as primary users, DIY application, home appliance repair, car maintenance, measuring electricity, experimental teaching, etc.
- See more on Amazon...
Brand: Abestop | Manufacturer: Abestop
Weight: 0.57 pounds
See On Amazon #17
HDS272S Oscilloscope 2+1CH Digital Handheld Oscilloscope Multiumeter 3 in 1 70MHz Bandwidth 3.5" LCD Multiumeter OSC+DMM+Waveform Signal Generator for Automobile Maintenance,Power Detection
Asin: B09C1G4CGR
Crisp And Portable---Crisp And Bright 3.5 Inch Color Lcd Screen, Showing A Higher Resolution Larger Character Display, Even Though In Dim Ambient Light Situations Or Outdoor Environment, Digital Oscilloscope Can Be Intuitive In Its Read. This Handheld Oscilloscope Is Portable And Comfortably Fits In The Hand. It Is Much Lighter, Easier And Perfect For Field Use. Practical And Intuitive Menu Page Layout, It Is Intuitive And Handy In Its Use..
Excellent Battery Life---Power By Standard 4400Mah 18650 Lithium Battery, Portable Oscilloscope Can Work Continuously For About 6 Hours, A Single Battery Can Supply Power Normally, Which Are Easy To Charge Or Purchase To Replace, Convenient For Your Work Anytime And Anywhere..
Multipurpose---Hds272s Oscilloscope Perform Fine Part For Troubleshooting In The Field. Wide Usage, It Can Be Practical In Automotive Diagnostic Job To Detect The Injectors And Ignition Coils Or Other; Discover Intermittent Dc Voltage Drops Or Issues With Industrial Equipment And Sensors; Experimental Course For School Educational; Other Range In Heavy Electrical, Low Voltage Prototyping, Delicate Repairs And So On..
3-In-1---2+1Ch Portable Oscilloscope Built-In Multimeter And Waveform Generators Are Very Convenient, 3 In 1 Functional Usb Oscilloscope, You Can Get Work Well Done Without Carrying Multiple Devices For Your Jobs. Owing Accurate Detection Function, Well Triggering Ability Of Waveform Generators And Useful Oscilloscope And 20,000 Count Dmm..
Features
- Parameter---HDS272S 3.5 inch LCD handheld oscilloscope with 2+1 channel (oscilloscope+multimeter+generator), 70MHz bandwidth, 250MS/s sample rate, 8K record length; 10,000 wfrms/s waveform refresh rate; 8 bits vertical resolution; 10mV/div - 10V/div vertical sensitivity; input coupling: DC, AC, and Ground.
- 3-in-1---2+1CH portable oscilloscope built-in multimeter and waveform generators are very convenient, 3 in 1 functional usb oscilloscope, you can get work well done without carrying multiple devices for your jobs. Owing accurate detection function, well triggering ability of waveform generators and useful oscilloscope and 20,000 count DMM.
- Crisp and Portable---Crisp and bright 3.5 inch color LCD screen, showing a higher resolution larger character display, even though in dim ambient light situations or outdoor environment, digital oscilloscope can be intuitive in its read. This handheld oscilloscope is portable and comfortably fits in the hand. It is much lighter, easier and perfect for field use. Practical and intuitive menu page layout, it is intuitive and handy in its use.
- Multipurpose---HDS272S oscilloscope perform fine part for troubleshooting in the field. Wide usage, it can be practical in automotive diagnostic job to detect the injectors and ignition coils or other; discover intermittent DC voltage drops or issues with industrial equipment and sensors; experimental course for school educational; other range in heavy electrical, low voltage prototyping, delicate repairs and so on.
- Excellent battery life---Power by standard 4400mAh 18650 Lithium battery, portable oscilloscope can work continuously for about 6 hours, a single battery can supply power normally, which are easy to charge or purchase to replace, convenient for your work anytime and anywhere.
- See more on Amazon...
Brand: Abestop | Manufacturer: OWON
See On Amazon #18
Digital Oscilloscope with 2 Channels 120Mhz Bandwidth Signal Generator 500MSa/s Sampling Rate, 2.8" LCD Backlight Display, Waveforms Storage, 3 Scan Modes, XY/YT/Roll, FFT Spectrum, Single Trigger
Asin: B0B497T6HR
☑3 Trigger Modes & One-Key Auto: The Diy Oscilloscope Kit Configured 3 Trigger Modes, Auto/Normal/Single Trigger. Support Waveform Parameter Setting,Such As Time Base, Amplitude, Trigger Slope, Etc. And Support Waveform One-Key Auto To Automatically Adapt To The Screen, No Need To Adjust Parameters,Convenient And Accurate Measurement..
☑Wide Applications: Can Be Used For Such As Sin-Gle-Chip Debugging, Car Maintenance, Home Appliance Maintenance,Diy Debugging, Electronic Competition, Power Supplys Debugging, Frequency Converter And So On..
☑Considerate Service: And Leolov Provides A Lifetime Service And Technical Support. Please Feel Free To Contaut Us, You Will Get A Reply In 24 Hours..
☑There Are 14 Measurement Options Available: Frequency, P-Eak To P-Eak, Duty Cycle, Amplitude, Rms, Average, Period, +Pulse Width, -Pulse Width, Max, Min,Top, Base..
☑Built-In Arm+ Fpga: This Handheld Oscilloscope Adopts Arm And Fpga Chip Collocation, Provides High-Speed Signal Acquisition And High-Speed Data Processing To Give You A Smooth Use Experience And Rich Functions..
☑Signal Generator: The Bottom Of The Oscilloscope Can Output A Variety Of Waveforms Of 2.5V Amplitude Such As Sine Waves, Square Waves, Trian-Gle Waves, Half Waves, Singh Waves, Among Which The Frequency Adjustment Ranges Of Sine Waves Is 0~ 10Mhz, The Frequency Ranges Of Other Waveforms Is 0~2Mhz, And The Accuracy Is Up To 0.1Hz..
☑Fft Spectrum & Cursor Measurement: The Professional Portable Oscilloscope With Fft Display Function, Can Analyze The Spectral Characteristics Of The Signal. Cursor Measurement Function, Convenient Manual Measurement Period, Frequency And Voltage..
Features
- Updated 2 Channels & High Bandwidth 2CH oscilloscope, 120MHz bandwidth, minimum measurement range 10mV /div, 500MSa/s sample rate,advanced digital trigger system.Up to 120M bandwidth can easily cope with mearsurement testes in various fields. Such as mcu debugging, car repair, home appliance repair, personal DIY, electronic competition, power supply debugging, inverter, etc. It can also be used as a portable tool for on-site debugging.
- FFT Spectrum & Cursor Measurement: The professional portable oscilloscope with FFT display function, can analyze the spectral characteristics of the signal. Cursor measurement function, convenient manual measurement period, frequency and voltage.
- 3 Trigger Modes & One-key AUTO: The DIY oscilloscope kit configured 3 trigger modes, auto/normal/single trigger. Support waveform parameter setting,such as time base, amplitude, trigger slope, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement.
- Signal Generator: The bottom of the oscilloscope can output a variety of waveforms of 2.5V amplitude such as sine waves, square waves, trian-gle waves, half waves, singh waves, among which the frequency adjustment ranges of sine waves is 0~ 10MHz, the frequency ranges of other waveforms is 0~2MHz, and the accuracy is up to 0.1Hz.
- There are 14 measurement options available: Frequency, P-eak to P-eak, Duty cycle, Amplitude, RMS, Average, Period, +Pulse width, -Pulse width, Max, Min,Top, Base.
- Built-in ARM+ FPGA: This handheld oscilloscope Adopts ARM and FPGA chip collocation, provides high-speed signal acquisition and high-speed data processing to give you a smooth use experience and rich functions.
- Wide applications: can be used for such as sin-gle-chip debugging, car maintenance, home appliance maintenance,DIY debugging, electronic competition, power supplys debugging, frequency converter and so on.
- Considerate Service: And Leolov provides a lifetime service and technical support. Please feel free to contaut us, you will get a reply in 24 hours.
- See more on Amazon...
Brand: Leolov | Manufacturer: Leolov
Dimensions: 1.97 x 5.51 x 3.94 Inches
See On Amazon #19
Mini Handheld Digital Oscilloscope Built-in Function Generator, 40MSa/s Sampling Rate, 18MHz Bandwidth, Support PWM, Persistence, 14 Type Measurement, 2.4 LCD Display with 10X, 100X Probe
Asin: B0CKWF1RTZ
Full Trigger Modes & One-Key Auto: The Little Oscilloscope Kit Configured 3 Trigger Modes, Auto/Normal/Single. Support Waveform Parameter Setting,Such As Time Base, Amplitude, Etc. And Support Waveform One-Key Auto To Automatically Adapt To The Screen, No Need To Adjust Parameters,Convenient And Accurate Measurement..
Built-In High Voltage Protection: The Handheld Oscilloscope Built-In High Voltage Protection Module Can Withstand Up To ±400V Ac/Dc Voltage Signal. And Built-In 1000M-Ah High-Quality Battery, Can Be Used Continuously For About 6 Hours After Full Charge..
What You Will Get: 1 *Digital Oscilloscope , 1 * High Voltage Probe , 1 * Typc-C Cable , 1* Alligator Clips , 1* Manual, And Aleplon Provide 365 Days Of Warranty Service, No Repair, Only Replacement..
Wide Applications: Can Be Used For Such As Sin-Gle-Chip Debugging, Car Maintenance, Home Appliance Maintenance,Diy Debugging, Electronic Competition, Power Supplys Debugging, Frequency Converter And So On..
There Are 14 Measurement Options Available: Frequency, P-Eak To P-Eak, Duty Cycle, Amplitude, Rms, Average, Period, +Pulse Width, -Pulse Width, Max, Min,Top, Base..
Portable & Powerful : This Is A Small, Compact And Portable Oscilloscope. The 154Pro Little Scope Adopt Arm And Fpga Chip Collocation To Provide High-Speed Signal Acquisition And High-Speed Data Processing..
Built In Signal Generator: It Can Output Various Waveform Diagrams Of 3V Amplitude Such As Sine Waves, Square Waves, Half Waves, Triangle Waves And So On. And You Can Move Or Zoom In On The Waveform Stopped By The Trigger. Frequency 0-500Khz, Duty Cycle 1-99%, The Value Of The Output Impedance Of The Internal Function Generator Is 150 Ohms. There Is A Buffer Amplifier At The Output Of The Generator..
Features
- Best Quality Budget Oscilloscope: Compared to the previous mini oscilloscope, this upgraded 154pro mini oscilloscope has a real-time sampling rate of 40MSa/s, a bandwidth of 18MHz, 500Khz signal generator frequency. The 154pro is the way to go. The bandwith is pretty important if you are troubleshooting even an old 8 bit computer. And It matches the frequency levels of retro PC.
- Built in Signal Generator: It can output various waveform diagrams of 3V amplitude such as sine waves, square waves, half waves, triangle waves and so on. And you can move or zoom in on the waveform stopped by the trigger. Frequency 0-500Khz, duty cycle 1-99%, the value of the output impedance of the internal function generator is 150 ohms. There is a buffer amplifier at the output of the generator.
- Full Trigger Modes & One-key AUTO: The little oscilloscope kit configured 3 trigger modes, auto/normal/single. Support waveform parameter setting,such as time base, amplitude, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement.
- Portable & Powerful : This is a small, compact and portable oscilloscope. The 154pro little scope adopt ARM and FPGA chip collocation to provide high-speed signal acquisition and high-speed data processing.
- Wide applications: can be used for such as sin-gle-chip debugging, car maintenance, home appliance maintenance,DIY debugging, electronic competition, power supplys debugging, frequency converter and so on.
- There are 14 Measurement Options Available: Frequency, P-eak to P-eak, Duty cycle, Amplitude, RMS, Average, Period, +Pulse width, -Pulse width, Max, Min,Top, Base.
- Built-in High Voltage Protection: The handheld oscilloscope built-in high voltage protection module can withstand up to 400V AC/DC voltage signal. And built-in 1000m-Ah high-quality battery, can be used continuously for about 6 hours after full charge.
- What You Will Get: 1 *Digital Oscilloscope , 1 * High Voltage Probe , 1 * Typc-C cable , 1* alligator clips , 1* Manual, and Aleplon provide 365 days of warranty service, no repair, only replacement.
- See more on Amazon...
Brand: Aleplon | Manufacturer: Aleplon
See On Amazon #20
FNIRSI 1013D Oscilloscope - Handheld Tablet Oscilloscope, Portable Digital Storage Oscilloscope Kit 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate 7" TFT LCD Touch Screen
Asin: B0BB2GTM1J | Model: 1013D | PartNumber: 1013D | Ean: 0789513085154 | UPC: 789513085154
Easy To Operate: Equipped With Efficient One-Button Automatic Device. One-Click Waveform Saving And Screenshots. The Built-In 1Gb Storage Space Can Store Up To 1000 Screenshots 1000 Sets Of Waveform Data.Powerful Waveform Picture Manager Supports Thumbnail Browsing, Viewing, Detailed Viewing, Page Turning, Deletion And Waveform Zooming In, Zooming Out, Moving, Etc.
Lissajous Graphic Display & Fft Viewing: Lissajous Graphic Display Function Can Be Used To Compare The Amplitude, Frequency And Phase Of The Two Sets Of Signals. Fft Viewing Function Can Roughly Estimation Of The Harmonic Content Of The Signal..
Easily Measuring : Capacitive Screen Touch & Gesture Operation, Cursor Measurement Function, When Manually Reading Amplitude-Frequency Parameters, You Do Not Need To Read The Background Scale Unit And Quantity, And You Can Directly Get The Peak-To-Peak Value And Frequency Without Conversion..
Highly Performance: 7 Inches, 800 * 480 Resolution, Bright Colors And High Contrast. Ultra-Thin And Easy To Carry. Built-In High-Voltage Protection Module,Can Tolerate A Continuous Voltage Of Up To 400V. 6000Mah High-Performance Lithium Battery, Can Be Used Continuously For 4 Hours After Fully Charged..
Features
- Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
- Highly Performance: 7 inches, 800 * 480 resolution, bright colors and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.
- Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc
- Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.
- Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
Dimensions: 7.20 x 4.90 x 2.00 inches | Weight: 2.20 Pounds
See On Amazon
Looking For Something Else?
Search