BERPSE KIT0001 Lid Hinge Kit Compatible with Traeger Labrostar Many Models - Includes Left and Right Hinges
Asin: B0C4D5ZVL4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Compatible With Traeger Labrostar Many Models.
Installation: Easy To Install, Just Remove The Damaged Hinge And Use A Screwdriver To Install A New One For Reuse.
Material: Made Of Heavy Metal, It Is Used To Install On The Left And Right Sides Of The Grille And Slide Onto The Receiving End Welded To The Cover..
Includes: 1 X Left Hinge And 1 X Right Hinge And The Hardware Required For Installation.
Features
- Part Number: KIT0001
- Includes: 1 x left hinge and 1 x right hinge and the hardware required for installation
- Compatible with Traeger Labrostar Many Models
- Material: Made of heavy metal, it is used to install on the left and right sides of the grille and slide onto the receiving end welded to the cover.
- Installation: Easy to install, just remove the damaged hinge and use a screwdriver to install a new one for reuse
- See more on Amazon...
Brand: BERPSE
See On Amazon Similar To BERPSE KIT0001 Lid Hinge Kit
#1
Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2
Asin: B01M6XXUM1 | Model: DP057-TATAMI | PartNumber: DP057-TATAMI | Ean: 0635133134102 | UPC: 635133134102
Strong Enough -- Douper 200N Heavy Duty Gas Struts Can Support Minimum 20 Lbs And Maximum 30 Lbs Lid And Lower Gently; Weight Support Will Be Doubled With 2 Hinges (40Lbs 60Lbs/ 2Pcs). Of Course, This Is A Theoretical Value, And The Load-Bearing Range Decreases As The Height Of Your Lid Increases..
Warm Tips -- Douper Hinges Will Not Applicable With The Lid At Width More Than 50” And Height Over 25”. And At Least 9 Inches Height Distance Needed For The Side Mount. Hinges Will Not Work If Your Lid Doesn’T Match Specified Dimension And Weight Requirement.
75°-105° Open Angle -- Each Lid Hinge Can Be Used For Right Or Left Hand Mounting, Keep The Hinge Installed For 75°-105° Adjustable Opening Angles, Depending On Actual Situation. Note: No Adjustments On Placement Measurements Of The Hinge Mounted On Side Board..
Holds Lid Open -- These Hinges Will Hold Your Lid Open Until You Push It Down. Never Worry Again About Having To Prop The Lid Open.
Features
- GENTLY CLOSE DESIGN -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers
- HOLDS LID OPEN -- These hinges will hold your lid open until you push it down. Never worry again about having to prop the lid open
- STRONG ENOUGH -- Douper 200N heavy duty gas struts can support minimum 20 lbs and maximum 30 lbs lid and lower gently; Weight support will be doubled with 2 hinges (40lbs 60lbs/ 2pcs). Of course, this is a theoretical value, and the load-bearing range decreases as the height of your lid increases.
- 75 -105 OPEN ANGLE -- Each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75 -105 adjustable opening angles, depending on actual situation. Note: NO adjustments on placement measurements of the hinge mounted on side board.
- WARM TIPS -- Douper hinges will not applicable with the lid at width more than 50 and height over 25 . And at least 9 inches height distance needed for the side mount. Hinges will not work if your lid doesn t match specified dimension and weight requirement
- See more on Amazon...
Brand: douper | Manufacturer: Douper
Dimensions: 1.00 x 13.00 x 1.00 Inches
See On Amazon #2
TRUE 870838 Top Left Door Hinge Kit
Asin: B00EMZBQPC | Model: 870838 | PartNumber: 870838 | Ean: 0092145476550, 0087083887087, 0088308272886, 0696334323658 | UPC: 696334323658, 087083887087, 092145476550, 088308272886
Use Genuine Oem Parts For Safety Reliability And Performance.
Brand Name: True.
For Over 65 Years, Refrigeration Has Been An Industry Leader In Commercial Refrigeration And Has Maintained High Standards.
Features
- Genuine Oem Replacement Part
- For Over 65 Years, Refrigeration Has Been An Industry Leader In Commercial Refrigeration And Has Maintained High Standards
- Use Genuine Oem Parts For Safety Reliability And Performance
- Brand Name: True
- See more on Amazon...
Brand: TRUE | Manufacturer: Prtst
Dimensions: 8.00 x 5.00 x 5.00 Inches | Weight: 0.68 Pounds
See On Amazon #3
RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs
Asin: B07FL746GJ | Ean: 0723172901332 | UPC: 723172901332
Max Weight Lid Hinge--Support 40Lbs When Use 2 Pcs Lid Stays, Lid Support Hinge Can Be Mounted On The Left Or Right Side..
Easy To Install Lid Support --The Lid Hinge Is Used For Side Mounting And Top Mounting. Only Mark Two Points For Drilling Holes, And Screw Each Mounting Bracket Into Its Respective Place. Installing Screws And Allen Wrench In Package..
Wide Application--Perfect As Toy Box Hinges, Lid Stay Support Good For Kitchen Cabinet Door Cupboard And Window Seat, Wardrobe..
Soft Close Lid Stay---Every Lid Support Can Be Adjusted In Largest 75°、90° And 100° And Used For Right Or Left Hand Mounting.
Features
- LID SUPPORT HINGE--Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support.
- SOFT CLOSE LID STAY---Every Lid support can be adjusted in largest 75 90 and 100 and used for Right or Left Hand mounting
- MAX WEIGHT LID HINGE--Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
- WIDE APPLICATION--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe.
- EASY TO INSTALL LID SUPPORT --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package.
- See more on Amazon...
Brand: RUYUFE | Manufacturer: Ryf
Dimensions: 0.15 x 8.00 x 1.00 inches
See On Amazon #4
TRUE 870837 Top Right Hand Hinge Kit
Asin: B00EMZBQJ8 | Model: 870837 | PartNumber: 870837 | Ean: 0795871318933, 0092145471951, 0087083787080, 0088308272879 | UPC: 087083787080, 795871318933, 088308272879, 092145471951
Use Genuine Oem Parts For Safety Reliability And Performance.
Brand Name: True.
For Over 65 Years, True Refrigeration Has Been An Industry Leader In Commercial Refrigeration And Has Maintained High Standards.
Features
- Genuine Oem Replacement Part
- For Over 65 Years, True Refrigeration Has Been An Industry Leader In Commercial Refrigeration And Has Maintained High Standards
- Use Genuine Oem Parts For Safety Reliability And Performance
- Brand Name: True
- See more on Amazon...
Brand: True Decor | Manufacturer: Prtst
Dimensions: 6.00 x 4.00 x 4.00 inches | Weight: 0.30 pounds
See On Amazon #5
Heavy Duty Lid Support Hinges Soft Close Folding Lid Stay Hinge, Keep Lid Hinge Open, Perfect for Cabinet, Kitchen, Wardrobe Toy Chamber Max Support 50lb/2pcs
Asin: B08JVBFMCX | Ean: 0723172895082 | UPC: 723172895082
Weight Capacity 50Lb—Lid Stay Max Weight Support 50Lbs/2Pcs, Lid Support Hinge Can Be Mounted On The Left Or Right Side. , Upward Door Open Adjustable Angle Of 75°,90°,110° By Yourself..
Easy To Install – Only Following The Placement Measurements On The Instructions, You Can Easy To Install Lid Stay. Allen Wrench And Exclusive Redesign Installation Instruction In Package..
Sturable Material -- The Up-Grated Version Has The Advantages Of Strong Bearing Capacity, Metal Connector Instead Of Plastic Clip. Made Of Premium Quality Zinc Alloy With Maximum Corrosion Resistance And Durability The Lid Stay Hinges Guarantee High Performance..
Keep The Lid Open--- The Lid Hinge Will Hold The Lid Open Until You Want To Close. Never Worry About Having To Support Lid Hinge Anymore. Heavy Toy Chest Lid To Prevent Fingers From Getting Smashed..
Features
- LID SUPPORT HINGE USAGE The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required.
- KEEP THE LID OPEN--- The lid hinge will hold the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed.
- WEIGHT CAPACITY 50LB Lid stay max weight support 50lbs/2pcs, Lid support hinge can be mounted on the left or right side. , Upward door open adjustable angle of 75 ,90 ,110 by yourself.
- STURABLE MATERIAL -- The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance.
- EASY TO INSTALL Only following the placement measurements on the instructions, you can easy to install lid stay. Allen wrench and exclusive redesign Installation instruction in package.
- See more on Amazon...
Brand: RUYUFE | Manufacturer: RUYUFE
Dimensions: 0.04 x 5.20 x 2.00 Inches
See On Amazon #6
QBOSO Heavy Duty Lid Stay Hinges Folding Lid Support Hinge,Perfect for Cabinet,Closet,Wardrobe or Toybox 110 Degree (Heavy Duty Style 1 Pair)
Asin: B07KMR4BZD | Model: B07KMR4BZD | PartNumber: B07KMR4BZD | Ean: 0794604213569 | UPC: 794604213569
●Material - Made Of Premium Quality Zinc Alloy With Maximum Corrosion Resistance And Durability The Lid Stay Hinges Guarantee High Performance: Max-Weight 35 Lbs When Use 2 Pcs（Up To 17.5Lbs - 1 Lid Stay）.
●Package - 2 Pcs Lid Stays,Allen Wrench And Exclusive Redesign Installation Instruction Are Included.
●Perfect For Any Lids Or Flaps When A Soft Closing Motion Is Required ,Each Lid Stay Can Be Used For Right Or Left Hand Mounting,Holds The Door At Any Angle You Want,Upward Door Open Adjustable Angle Of 75°,90°,110°,Self Adjust,.
●Adjustable For Different Weights - With The Allen Wrench Included In The Package, The Support Hinges Are Fully Adjustable For Different Weight By Turning The Screw In The Middle Of The Arms To Set Up Appropriate Pressure So That The Lid Can Be Slided Down Gently Without Smashing Fingers..
Features
- These support hinges are well made and designed to support the lids of box, such as mini toy box, cabinet,closet,wardrobe lids, the enhanced version has the advantages of strong bearing capacity.
- Adjustable for different weights - With the Allen wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers.
- Material - Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 35 lbs when use 2 pcs up to 17.5lbs - 1 Lid Stay
- Perfect for any lids or flaps when a soft closing motion is required ,each lid stay can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75 ,90 ,110 ,self adjust,
- Package - 2 pcs lid stays,Allen wrench and exclusive redesign Installation instruction are included
- See more on Amazon...
Brand: QBOSO | Manufacturer: QBOSO
Dimensions: 0.10 x 6.69 x 4.69 Inches
See On Amazon #7
APFFSY 200N Heavy Duty Soft Close Lid Support Hinge, Chest Hinge Heavy Lid Hinges for Wooden Box Trunk, Safety Toy Box Hinges Soft Close Slow Lowering
Asin: B0B5538VTZ | Ean: 0631344781081 | UPC: 631344781081
【 Easy To Install- Important：Refer To Our Install Videos And Mail Images! 】The Heavy Duty Toy Box Hinges Soft Close Can Be Installed On Left Or On Right. Also Can Be Used For Side-Mounting And Top-Mounting. And We Will Provide Lifetime Warranty (No Man-Made) And Friendly Customer Service..
【 Before Purchasing -Very Sturdy And With Much Pressure! 】 The Chest Lid Hinge Is Very Sturdy And With Much Pressure!! Nice Performance For Lids That Hurger Or Weight Heavier, But No Fit Cabinet As That Small Or Light Lids/Doors. Please Note The Heavy Duty Support Weight Of This Lid Support Hinge Before Purchasing. If The Lid Is Relatively Light, Only 1Pc Chest Hinge (Support 30Lbs) Is Needed!.
【Safety Chhest Hinges Widely Usage 】Gas Struts Heavy Lid Hinges Designed To Lid Of Chest, Such As Heavy Duty Soft Close Hinges For Toy Box, And Bench Hinges, Blanket Chest Hinges, Seat Top Hinges, Trunk Hinges, Duck Or Dog House Roof, Similar Project, Etc. Perfect For Any Lids Or Flaps When Heavy Duty Lid Support Soft Close Required..
【 Strong Heavy Duty Lid Support Hinge And 75°-105° Opening Angles 】200N Gas Struts Heavy Duty Chest Hinges Support Heavy Lid Up To 60Lb/2Pcs (Under 30Lb/ Only 1Pc Needed!), And Chest Lid Slow Lowering. Allow Lids To Open For 75°-105° Adjustable Opening Angles..
Features
- SLOW CLOSE LID SUPPORT HINGES It's soft close hinges for heavy lid. Excellent soft close and safety solution for heavy lid chest hinges, huge toy box hinges. Lid support hinge will hold the heavy lid opened until you push it down, then slow close gently to avoid to slam shut and crush the fingers. Good gift fit for the large toy box or chest.
- STRONG HEAVY DUTY LID SUPPORT HINGE AND 75 -105 OPENING ANGLES 200N gas struts heavy duty chest hinges support heavy lid up to 60lb/2pcs (Under 30lb/ only 1pc needed!), and chest lid slow lowering. Allow lids to open for 75 -105 adjustable opening angles.
- EASY TO INSTALL- Important Refer to our install videos and mail images! The heavy duty toy box hinges soft close can be installed on left or on right. Also can be used for side-mounting and top-mounting. And we will provide lifetime warranty (no man-made) and friendly customer service.
- SAFETY CHHEST HINGES WIDELY USAGE Gas struts heavy lid hinges designed to lid of chest, such as heavy duty soft close hinges for toy box, and bench hinges, blanket chest hinges, seat top hinges, trunk hinges, duck or dog house roof, similar project, Etc. Perfect for any lids or flaps when heavy duty lid support soft close required.
- BEFORE PURCHASING -Very sturdy and with much pressure! The chest lid hinge is very sturdy and with much pressure!! Nice performance for lids that hurger or weight heavier, but no fit cabinet as that small or light lids/doors. Please note the heavy duty support weight of this lid support hinge before purchasing. If the lid is relatively light, only 1pc chest hinge (support 30lbs) is needed!
- See more on Amazon...
Brand: APFFSY | Manufacturer: APFFSY
Dimensions: 0.04 x 13.00 x 1.00 inches
See On Amazon #8
Sauton 1pair Folding Lift up Top Table Mechanism Hardware Fitting Hinge, Gas Hydraulic
Asin: B076FPX8MT | Model: 43237-2 | PartNumber: 43237-2 | Ean: 0735810443616 | UPC: 735810443616
*-.The Coffee Table Lift Top Hardware Designed With A Gas Rod Buffe,Rise And Drop Is Very Slowly, Convenient And Safe..
*-It's A Good Idea For Coffee Table, It Can Save Space,Smoothly,Beautiful Appearance. These Desk Mechanism Hardware Combined With A Sensory Lock To Make It More Perfect..
*-The Coffee Table Lift Top Hardware Suitable For Functional Coffee Table, Tea Table, Telescopic Coffee Table, Mini Wall Cabinet..Etc..
*-It Support Slowly Raised And Folded, So Easy To Operate It. Easy To Use And Work Great For Home Project..
Features
- *-Made of heavy duty steel material, the surface coated with anti-corrosion paintanti-rust and corrosion-resistant, durable and strong.
- *-It support slowly raised and folded, so easy to operate it. Easy to use and work great for home project.
- *-.The coffee table lift top hardware designed with a gas rod buffe,rise and drop is very slowly, convenient and safe.
- *-The coffee table lift top hardware suitable for functional coffee table, tea table, telescopic coffee table, mini wall cabinet..etc.
- *-It's a good idea for coffee table, it can save space,smoothly,beautiful appearance. These desk mechanism hardware combined with a sensory lock to make it more perfect.
- See more on Amazon...
Brand: SAUTON | Manufacturer: Sauton
Dimensions: 0.04 x 9.60 x 9.00 inches
See On Amazon #9
T Tulead Spring Lid Support Left Right Lid Support Down Hinge Red Bronze Iron Support Box Cabinet Hardware Pack of 2 with Mounting Screws
Asin: B07V1MS4F9 | Model: ADD06180465 | PartNumber: ADD06180465 | Ean: 0680577988156 | UPC: 680577988156
🔷Great For Supporting Lids On Cabinet,Box,Chest,Luggage,Door,Etc.
🔷Max Weight Support:10-14 Lbs /4.5-6.3Kg.
🔷Spring Lid Support Can Be Mounted On Left Or Right Positions.
🔷Total Size:182X41x38mm/7.2"X1.6"X1.5"(L*W*H).
Features
- Package Content:2 x Spring Lid Support with Mounting Screws
- Total Size:182x41x38mm/7.2x1.6x1.5(L*W*H)
- Great for supporting lids on cabinet,box,chest,luggage,door,etc
- Spring lid support can be mounted on left or right positions
- Max Weight Support:10-14 lbs /4.5-6.3kg
- See more on Amazon...
Brand: T Tulead | Manufacturer: T Tulead
Dimensions: 0.01 x 7.17 x 1.61 Inches
See On Amazon #10
Reliable Hardware Company RH-1225BK-2-A hange Set Hinge, Black, 2 Count
Asin: B00JJ18XIM | Model: RH-1225BK-2-A | PartNumber: RH-1225BK-2-A | Ean: 0856248005235 | UPC: 856248005235
14 Ga. Steel.
Black Powder Coat Finish.
4 Mounting Holes .20'' Diameter.
Features
- 2.30'' W x 1.91'' H
- 4 Mounting Holes .20'' Diameter
- 14 ga. Steel
- Black Powder Coat Finish
- See more on Amazon...
Brand: Reliable Hardware Company | Manufacturer: Bienz & Fowlks dba Reliable Hardware Company
Dimensions: 1.25 x 2.25 x 0.50 Inches
See On Amazon
Looking For Something Else?
Search