KEMIMOTO Motorcycle Cup Holder and Motorcycle Saddlebags
Asin: B0C7KTHK25
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Upgraded Alligator Clamp】Featuring A New Alligator Clamp Design With Two Screws, One Gasket, One Rubber Pad, And Internal Anti-Scratch Velcro, Our Atv Cup Holder Is More Stable And Less Likely To Damage Your Cup Or Become Loose..
【20L Large Capacity & 4L Extra Storage】Motorcycle Saddlebags Size Is 13.7 *6.8 *7.8 Inches. Features An Expandable Main Compartment For Extra Storage, Holds 12 L Per Side After Expansion. Such As Cups, Drinks, Gloves, Jackets, Wallets, Earphones, Raincoats, Or Other Daily Necessities To Meet Your Demands For Commuting And Short Vacations..
【Wide Suitability For Motorcycle】Universal Dual Sport Saddlebags Is Fit For Most Motorcycle Models. Including But Not Limited To Dirt Bike, Dual Sport, Motocross, Enduro Motorcycles, Off-Road Motorcycles, And Adventure Touring Motorcycles With Saddlebag Brackets(Ps: Please Make Sure The 1-Inch Clearance Between The Saddlebags And Exhaust Pipe)..
【Aluminum Foil Lining】The Upgraded Aluminum Foil Liner Makes Cleaning This Boat Cup Holder Easy And Helps To Keep Your Drinks Cold Or Hot For A Short Duration..
Features
- Increased Capacity Our motorcycle cup holder bag has a height of 7.8 inches, allowing you to easily place large cups during your travels, and comes with a front pocket that is 5.5 inches high, enabling you to store small personal items.
- Aluminum Foil Lining The upgraded aluminum foil liner makes cleaning this boat cup holder easy and helps to keep your drinks cold or hot for a short duration.
- Upgraded Alligator Clamp Featuring a new alligator clamp design with two screws, one gasket, one rubber pad, and internal anti-scratch Velcro, our ATV cup holder is more stable and less likely to damage your cup or become loose.
- Wide Suitability for Motorcycle Universal dual sport saddlebags is fit for most motorcycle models. Including but not limited to Dirt Bike, Dual Sport, Motocross, Enduro motorcycles, Off-road motorcycles, and Adventure touring motorcycles with saddlebag brackets(PS: Please make sure the 1-inch clearance between the saddlebags and exhaust pipe).
- 20L Large Capacity & 4L Extra Storage Motorcycle saddlebags size is 13.7 *6.8 *7.8 inches. Features an expandable main compartment for extra storage, holds 12 L per side after expansion. Such as Cups, Drinks, Gloves, Jackets, Wallets, Earphones, Raincoats, or other daily necessities to meet your demands for commuting and short vacations.
- See more on Amazon...
Brand: KEMIMOTO
See On Amazon Similar To KEMIMOTO Motorcycle Cup Holder and
#1
KEMIMOTO Heated Hoodie with 12V Battery Pack, Unisex Warming Heated Coat, Heated Sweatshirt for Men and Women, Electric Heating Hoodie with 6 Heated Zones, 2XL, Grey
Asin: B0B5ZFMK8J
6 Heated Zone: 6 Carbon Fiber Heating Elements Generate Heat Across Core Body Areas (3 For The Back, 2 For The Abdomen, And 1 For The Neck). This Heated Sweater Provides 3 Buttons For Independent Control Of Heating Zones..
About Size And Style: Relaxed Fit, Fashion Styles, Perfect Fits For Most American Men's Bodies. (1 Or 2 Sizes Smaller For Women). Heated Hoodies For Men And Women Are The Best Gifts For Families And Friends In Winter..
Smart Heating Modes: 3 Control Switches, 3 Heating Levels, 6 Heating Zones, Freely Choose The Temperature You Want, And Adjust The Heating Zone According To Your Needs And Preferences, The Heating Zone Transfers Enough Heat And Is Well Distributed To Provide Overall Heating..
Fast And Long-Lasting Warmth: Kemimoto Mens Heated Hoodie Comes With A 12V 10000/15000Mah(2023 Upgraded Model) Ul 2054 Certification Battery, Heats Up Fast In Seconds, Up To 10 Hours Of Working Time On The Low Heating Setting, 4-6Hrs On Medium, 2-4Hrs On High. And Rapid Recharge In Just 3-4 Hours..
Features
- Warm and Soft Lining: The quality cotton fabric exterior and soft and fleece-like interior could keep you warm the whole day. Enjoy the comfort of the heated sweatshirt at home or during outdoor activities. For a better heating experience, we recommend wearing the heated hoodies for men under a lightweight jacket when you are outdoors.
- Fast and Long-Lasting Warmth: KEMIMOTO mens heated hoodie comes with a 12V 10000/15000mAh(2023 Upgraded Model) UL 2054 certification battery, heats up fast in seconds, up to 10 hours of working time on the low heating setting, 4-6hrs on medium, 2-4hrs on high. And rapid recharge in just 3-4 hours.
- 6 Heated Zone: 6 carbon fiber heating elements generate heat across core body areas (3 for the back, 2 for the abdomen, and 1 for the neck). This heated sweater provides 3 buttons for independent control of heating zones.
- Smart Heating Modes: 3 control switches, 3 heating levels, 6 heating zones, freely choose the temperature you want, and adjust the heating zone according to your needs and preferences, the heating zone transfers enough heat and is well distributed to provide overall heating.
- About Size and Style: Relaxed fit, fashion styles, perfect fits for most American men's bodies. (1 or 2 sizes smaller for women). Heated hoodies for men and women are the best gifts for families and friends in winter.
- See more on Amazon...
Brand: KEMIMOTO
See On Amazon #2
kemimoto Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder with 0.6"-1.5" Alligator Clamp, Universal Water Bottle Holder for Motorcycle, ATV/UTV, Scooter, Boat, Kayak, Bike, Walker
Asin: B083TV995S
【24Oz Max Load Capacity】The Maximum Cup Capacity Can Reach 24Oz, Please Note That The Bottom Diameter Of The Scooter Cup Holder Is 3.94 In. With A Drain At The Bottom Of Cup Holder To Keep The Water Out. Not Compatible With Road King, Spyder Rt, Burgman 400S..
【Sturdy Fabric With 2 Separated Mesh Pockets】Be Made Of 600D Oxford Fabric Instead Of Other Stainless Steel Or Plastic Holder, Sturdy And Washable. Don’T Worry About Rusty And Broken After 2-3 Months. 2 Mesh Pockets To Easily Hold Your Little Things..
【With Tightening Drawstring】The Adjustable Top Drawstring Is Reinforced And Tight. You Can Cinch Down On The Top To Hold The Drink Firm If The Going Gets Bumpy Keeping It From Flopping Around Along Your Ride..
【Easy To Install On 0.6"-1.5" Pole】The Alligator Clamp Of This Kayak Cup Holder Fits 0.6"-1.5" Diameter Handlebars/Pole, Please Confirm The Diameter Of Your Handlebar/Pole Before Purchasing. And It Is Easy To Install And Remove With A Hand Screw Design..
Features
- Upgraded Alligator Clamp-Patented Design Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90 adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles.
- Easy to Install on 0.6-1.5 Pole The alligator clamp of this kayak cup holder fits 0.6-1.5 diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.
- 24oz Max Load Capacity The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out. Not Compatible with Road King, Spyder RT, Burgman 400s.
- With Tightening Drawstring The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride.
- Sturdy Fabric with 2 Separated Mesh Pockets Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, sturdy and washable. Don t worry about rusty and broken after 2-3 months. 2 Mesh pockets to easily hold your little things.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
See On Amazon #3
KEMIMOTO ATV Cup Holder, Upgraded Motorcycle Drink Holder Handlebar, Water Bottle Holder Mount with 0.6 -1.56 Metal Clamp for Scooter Bike Boat Stroller Wheelchair Golf Push Cart Tractor
Asin: B08R6VT4FQ | Model: B0113-06701BK | PartNumber: B0113-06701BK
【Strong Metal Clamp&Crocodile Bite Design】Compared With Other Cup Holders, The Kemimoto Atv Drink Holder Is Made Of Durable And Sturdy Metal Material; The Crocodile Bite Design Of Our Cup Holder Can Obtain A Stronger Grip, Not Easy To Slip Or Vibrate. Meanwhile, 2 Pieces Of Anti-Skip Pad Gaskets Will Be Provided To Fit Handlebars Better..
【Anti-Break&Tough Material】Compared With The Old Style, The Upgraded 4-Wheeler Cup Holder Is Made Of Tougher, Crack-Proof, Thicker Pp Material, Not Easy To Crack. This Holder Grips Hard Enough Not To Bounce Up And Down, Slide Around, Or Fall Off While Going Over Rough Terrain..
【Wide Compatibility 0.6”-1.56”】The Mount Range Of The Kemimoto Bike Cup Holder Is 0.6 In-1.56 In. Suitable For Different Handlebars And Different Occasions, The Kemimoto Water Cup Holder Can Fit Most Atvs, Motorcycles, Bicycles, Quads, Boats, Strollers, Walkers, Wheelchairs, Scooters, And Golf Carts, Compatible With Polaris Sportsman Scrambler Rancher, And So On Four Wheeler. This Is Also A Portable Speaker Mount With Wide Compatibility And Application..
【Larger &Adjustable Holder Size 3.5In】The Maximum Adapted Diameter Of The Motorcycle Cup Holder Is 3.5 Inches. The Capacity Of The Motorcycle Drink Holder Can Be Manually Adjusted At The Bottom. Flexible Arms Allow Different-Sized Cups (Ordinary Water Cups/Bottles/Cans, Travel Mugs, Beverages). Compatible With Stanley Yeti Contigo Nalgene Water Bottle..
Features
- 28oz Max Load Capacity KEMIMOTO cup holder provides a higher load-bearing capacity. After testing, the maximum load-bearing capacity of the cup holder can reach 28oz. Don't worry about breaking or falling if your bottle weighs below 28oz. KEMIMOTO bottle holder could accommodate 12oz-28oz water cups.
- Larger &Adjustable Holder Size 3.5In The maximum adapted diameter of the motorcycle cup holder is 3.5 inches. The capacity of the motorcycle drink holder can be manually adjusted at the bottom. Flexible arms allow different-sized cups (ordinary water cups/bottles/cans, travel mugs, beverages). Compatible with Stanley Yeti Contigo Nalgene water bottle.
- Strong Metal Clamp&Crocodile Bite Design Compared with other cup holders, the KEMIMOTO ATV drink holder is made of durable and sturdy metal material; the crocodile bite design of our cup holder can obtain a stronger grip, not easy to slip or vibrate. Meanwhile, 2 pieces of anti-skip pad gaskets will be provided to fit handlebars better.
- Wide Compatibility 0.6 -1.56 The mount range of the KEMIMOTO bike cup holder is 0.6 in-1.56 in. Suitable for different handlebars and different occasions, the KEMIMOTO water cup holder can fit most ATVs, motorcycles, bicycles, quads, boats, strollers, walkers, wheelchairs, scooters, and golf carts, compatible with Polaris Sportsman Scrambler Rancher, and so on four wheeler. This is also a portable speaker mount with wide compatibility and application.
- Anti-Break&Tough Material Compared with the old style, the upgraded 4-wheeler cup holder is made of tougher, crack-proof, thicker PP material, not easy to crack. This holder grips hard enough not to bounce up and down, slide around, or fall off while going over rough terrain.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 3.15 x 7.48 x 6.30 Inches
Warranty: no
See On Amazon #4
KEMIMOTO ATV Cup Holder Motorcycle Bottle Holder Universal Drink Holder with 0.6-1.56in Metal Clamp Bike Cup Holder for 20oz Bottle for Boat, Stroller, Walker, Wheelchair, Kayak, Scooter, Golf Cart
Asin: B07CTM88PH | Model: FTVBH004FT | PartNumber: FTVBH004FT
Storage Capacity: The Diameter Of 2.8 Inches And The Maximum Load Capacity Of 20Oz Can Meet The Needs Of Customers With Different Cup Types Like Nursing Bottle/Beer Bottle/Sports Cup And So On. The Cup Holder Doesn't Take Up Too Much Space So It Won't Interfere With Driving..
No Drilling: Drill-Free And It Can Be Mounted Vertically As Well As Horizontally..
Anti-Skid Pad: This Bike Holder Will Not Make The Bottle Fall Easily During Strenuous Exercise And Better Avoid The Damage Of The Clip To The Object With The Effective Strengthening Of The Friction Anti-Skid Pad..
Universal Compatibility: 0.6-1.56In Diameter Range Clamp Design Makes The Drink Holder Used On Atv/Motorcycle/Bike/Boat/Wheelchair/Stroller/Walker/Scooter/Desks To Meet Your Professional/Daily Needs. Compatible With Stanley Yeti Contigo Nalgene Water Bottle..
Features
- Solid Metal Clamp: This motorcycle cup holder uses high-quality metal clamps, increasing max weight and extending service life. Other cup holders with plastic mounting clamps in the market can not withstand higher pressure and can be easily broken.
- Universal Compatibility: 0.6-1.56in Diameter range clamp design makes the drink holder used on ATV/motorcycle/bike/boat/wheelchair/stroller/walker/scooter/desks to meet your professional/daily needs. Compatible with Stanley Yeti Contigo Nalgene water bottle.
- Storage Capacity: The diameter of 2.8 inches and the maximum load capacity of 20oz can meet the needs of customers with different cup types like nursing bottle/beer bottle/Sports cup and so on. The cup holder doesn't take up too much space so it won't interfere with driving.
- Anti-skid Pad: This bike holder will not make the bottle fall easily during strenuous exercise and better avoid the damage of the clip to the object with the effective strengthening of the friction anti-skid pad.
- No Drilling: Drill-free and it can be mounted vertically as well as horizontally.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 3.54 x 6.30 x 3.54 Inches
Warranty: NO
See On Amazon #5
KEMIMOTO Cup Holder, Drink Holder for All Kinds of Cups and Bottles with a Diameter of 2.67"-3.85", Cup Holder for Tractor Mower Truck School Bus Treadmill, Metal Surface
Asin: B0C5CYVR3G | Model: Cup Holder | PartNumber: Cup Holder
【Secures Tightly Without Tipping Or Spilling】This Heavy-Duty Cup With Proprietary Material Keeps Water Bottles Upright At All Times, For Easy Adding Or Removing Of Water Bottles. The Provided Silicone Coaster Prevents Cups From Being Scratched While Driving..
【Reliable To Hang】The Bus Cup Holder Can Withstand Up To 6.6 Lbs. The Silicone Coaster Prevents Bottles From Rattling While Driving Don't Worry About Your Cup Holder Will Move Around. For More Stability, Simply Position The Cup Holder Closer To The Floor..
【Durable& Rustproof】The Kemimoto Cup Holder For Tractors Is Made Of Aluminum Alloy Which Is Extremely Sturdy And Durable. Our Cup Caddy Has A Coating On The Outside To Prevent Rust For Improved Durability, Thus It Can Be Used For Many Years..
【Powerful - Attracts Metal Surface】The Kemimoto Drink Holder Is No Drilling Needed, And Will Not Scratch The Placed Surface. The Lawn Mower Drink Holder Is Suitable For Ships, Yachts, Trucks, Rvs, Courtyards, Mowers, School Bus Refrigerator Treadmills, And All Other Metal Surfaces..
Features
- Fit Most 12 - 32 OZ Bottles and Mugs in 2.67"-3.85" The KEMIMOTO bottle holder is compatible with all kinds of cups and bottles with a diameter of 2.67"-3.85" and a weight of 12 - 32 ounce bottles. The cup holder can work with the most popular brands of bottles and mugs. Compatible with Stanley Yeti Contigo Nalgene water bottle.
- Powerful - Attracts Metal Surface The KEMIMOTO drink holder is no drilling needed, and will not scratch the placed surface. The lawn mower drink holder is suitable for ships, yachts, trucks, RVs, courtyards, mowers, school bus refrigerator treadmills, and all other metal surfaces.
- Secures Tightly without Tipping or Spilling This heavy-duty cup with proprietary material keeps water bottles upright at all times, for easy adding or removing of water bottles. The provided silicone coaster prevents cups from being scratched while driving.
- Durable& Rustproof The KEMIMOTO cup holder for tractors is made of aluminum alloy which is extremely sturdy and durable. Our cup caddy has a coating on the outside to prevent rust for improved durability, thus it can be used for many years.
- Reliable to Hang The bus cup holder can withstand up to 6.6 Lbs. The silicone coaster prevents bottles from rattling while driving don't worry about your cup holder will move around. For more stability, simply position the cup holder closer to the floor.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 4.72 x 5.31 x 4.92 inches
Warranty: 24-Month Warranty
See On Amazon #6
KEMIMOTO Bike Cup Holder, Bike Water Bottle Holder Handlebar with Mesh Pockets Oxford Fabric Bicycle Drink Cup Holder for Mountain Bike Road Kids Bikes e-Bike Wheelchair Scooter up to 32oz(Grey)
Asin: B0B5K9LFNN | Model: FCH-001 | PartNumber: FCH-001
【Fit Most Size Of Bottle】 The Bike Water Bottle Holder With Drawstring Design, Which Can Shrink Freely To Fit 12 Oz - 32 Oz Size Bottle, No More Spilled Drinks. Perfect For Holding Your Coffee, Soft Drinks, And Stainless Steel Bottle..
【Durable Bicycle Cup Holder】 Be Made Of High-Quality Oxford Fabric Instead Of Other Stainless Steel Or Plastic Holders, Durable And Washable. Don’T Worry About Rusty And Broken After 2-3 Months. This Water Bottle Holder For Bikes Is A Great Present For Anyone Who Loves To Bike, E-Bike, Or Cruiser..
【Hold Your Water Bottle Steadily】 The Fixing Position Presents A Stable Triangular Structure, The Bike Coffee Cup Holder Will Be Firmly Fixed On Your Bicycle Even On Rough Mountain Roads. And The Design Of A Sponge Inside Could Provide Some Protection For Your Bottle Or Small Items In The Mesh Pocket..
【Free Your Hands】 The Bike Drink Cup Holder Has Two Separate Mesh Pockets, So You Can Carry Some Small Items Like Cell Phones, Sunglasses, Goggles, Keys, Wallet..
Features
- Wide Application This upgraded bike cup holder has 4 hook&loop straps that could be easily attached on the left or right side of 0.9" to 2" diameter handlebars. Like road bikes, mountain bikes, electric bikes, folding bikes, kid's bikes, cruisers, wheelchairs, scooters, etc.
- Free Your Hands The bike drink cup holder has two separate mesh pockets, so you can carry some small items like cell phones, sunglasses, goggles, keys, wallet.
- Fit Most Size of Bottle The bike water bottle holder with drawstring design, which can shrink freely to fit 12 oz - 32 oz size bottle, no more spilled drinks. Perfect for holding your coffee, soft drinks, and stainless steel bottle.
- Hold Your Water Bottle Steadily The fixing position presents a stable triangular structure, the bike coffee cup holder will be firmly fixed on your bicycle even on rough mountain roads. And the design of a sponge inside could provide some protection for your bottle or small items in the mesh pocket.
- Durable Bicycle Cup Holder Be made of high-quality Oxford fabric instead of other stainless steel or plastic holders, durable and washable. Don t worry about rusty and broken after 2-3 months. This water bottle holder for bikes is a great present for anyone who loves to bike, e-bike, or cruiser.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 6.70 x 2.10 x 2.10 inches
Warranty: Manufacturer warranty for 12 months from date of purchase.
See On Amazon #7
KEMIMOTO UTV Dash Cup Holder with Switch Panel Compatible with Pioneer 700/700-4 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Asin: B09DCZJS21 | Model: B0113-09401BK | PartNumber: B0113-09401BK
【Extra Storage Area】The Cup Holder Provides A Reachable Place To Put Your Stuff Needed On A Ride, Such As Cups, Bottles, Cellphones, Gloves, Sunglasses, Etc..
【Perfectly Compatible】Kemimoto Cup Holder Compatible With Pioneer 700 / 700-4 2014 2015 2016 2017 2018 2019 2020 2021..
【4 Switch Reserved】In Addition To The Function Of Holding Items, The Cupholder Also Can Work As A Switch Plate. There Are 4 Switch Positions Reserved On The Cup Holder You Can Add Switches According To Your Need..
【Wide Adaptability】The Cup Holder Can Hold Bottles Or Cups Within A Diameter Of 85Mm..
Features
- Easy Installation The installation location of this drink holder is on the dashboard. All you need is to drill 4 holes for each one in the pre-marked spots and complete the installation in a few minutes.
- Wide Adaptability The cup holder can hold bottles or cups within a diameter of 85mm.
- Extra Storage Area The cup holder provides a reachable place to put your stuff needed on a ride, such as cups, bottles, cellphones, gloves, sunglasses, etc.
- 4 Switch Reserved In addition to the function of holding items, the cupholder also can work as a switch plate. There are 4 switch positions reserved on the cup holder you can add switches according to your need.
- Perfectly Compatible kemimoto cup holder compatible with Pioneer 700 / 700-4 2014 2015 2016 2017 2018 2019 2020 2021.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimotohunting
Dimensions: 4.53 x 9.84 x 6.30 Inches
Warranty: Manufacturer warranty for 12 months from date of purchase.
See On Amazon #8
KEMIMOTO Motorcycle Saddlebags Waterproof 30L (15L*2) Compatible with Grom 2022+ Motorcycle Side Saddlebags Extendable Pannier Bag for Motorcycle Dirt Bike Dual Sport Motorcross Motorbike
Asin: B0B7NJGPK6 | Model: F1116-04301BK | PartNumber: F1116-04301BK
Design: Double-End Zipper Design For Easy Closure. The Side Mesh Design Can Place The Water Bottle, And The Side Saddle Bag With A Reflective Strip Design, To Ensure The Safety Of Travel..
Easy To Install: ✔Our Saddlebags Can Be Installed Either Way. A Saddle Bag With A Velcro Fixed And Adjustable Strap Can Be Easily Fixed On The Motorcycle, Suitable For Commuting To Work, Shopping, And Short Outings..
Material: Motorcycle Saddlebags Are Made Of High-Quality Waterproof Oxford, Come With A Rain Cover To Keep Some Rain Out Or Dusty, And Keep Stuff Dry And Clean..
Expandable Saddle Bags: Motorcycle Side Saddlebags Can Be Expanded To 15L Capacity On Each Side, Large Capacity To Accommodate Your Supplies For Your Commute And Short Holidays, Such As Water Bottle, Drinks, Gloves, Jacket, Purse, Power Bank, Raincoat, Or Other Necessities..
Features
- Fitment: Motorcycle saddlebags are fit for most motorcycle models. Including but not limited to Dirt Bikes, Dual Sport, Motocross, and Enduro motorcycles, perfectly compatible with GROM 2022+, Navi, Z125, and most small motorcycles. (PS: Please make sure the 1-inch clearance between the saddlebags and exhaust pipe).
- Expandable Saddle Bags: Motorcycle side saddlebags can be expanded to 15L capacity on each side, large capacity to accommodate your supplies for your commute and short holidays, such as water bottle, drinks, gloves, jacket, purse, power bank, raincoat, or other necessities.
- Design: Double-end zipper design for easy closure. The side mesh design can place the water bottle, and the side saddle bag with a reflective strip design, to ensure the safety of travel.
- Material: Motorcycle saddlebags are made of high-quality waterproof Oxford, come with a rain cover to keep some rain out or dusty, and keep stuff dry and clean.
- Easy to install: Our saddlebags can be installed either way. A saddle bag with a Velcro fixed and adjustable strap can be easily fixed on the motorcycle, suitable for commuting to work, shopping, and short outings.
- See more on Amazon...
Brand: KEMIMOTO
See On Amazon #9
KEMIMOTO Boat Cup Holder, Marine Cup Holder for Boat with Drain Fishing Rod Rack Bait Holders Universal Fit for Boat, Beach Chair, Golf Cart, Scooter Black
Asin: B0CS2SWS77 | Model: CH101202-BK | PartNumber: CH101202-BK
【Excellent Storage Capacity】Golf Cart Cup Holder Can Accommodate 10Oz To 20Oz Water Cups, Drinks, And Cans, Or Even Those With Greater Capacity. Please Note That The Maximum Diameter Of The Cup Should Not Exceed 3 Inches..
【Easy To Install】Attach The Non-Slip Pads To The Clamp, Ensuring They Are Aligned With The Center Of The Boat Pole. Adjust The Clamp To Fit The Size Of The Boat Pole. Place The Bolt On The Clamp. Tighten The Thumb Nut. The Two Cup Holders Can Be Removed If Needed..
【Rod Holders And Bait Holders】The Marine Cup Holders For Boats With A Hollowed-Out Bottom Supports The Holding Of Fishing Rods, Water Bottles, Or Travel Mugs With Handles. Additionally, There Are Holes For Bait, Which Enable Quick And Convenient Retrieval..
【Wide Compatibility 0.8”-1.5”】The Mounting Range Of The Clamp On Cup Holder Is 0.8 Inches To 1.5 Inches. Suitable For Various Poles And Occasions, The Kemimoto Water Cup Holder Can Fit Most Boats, Beach Chairs, Scooters, And Golf Carts..
Features
- Sturdy and Stable The cup holder for boat is made of high-quality ABS material. The mounting clamp of the boat cup holders can achieve a stronger grip, making it less likely to slip or vibrate. Meanwhile, two anti-slip pad gaskets will be provided to fit the pole.
- Wide Compatibility 0.8 -1.5 The mounting range of the clamp on cup holder is 0.8 inches to 1.5 inches. Suitable for various poles and occasions, the KEMIMOTO water cup holder can fit most boats, beach chairs, scooters, and golf carts.
- Excellent Storage Capacity Golf cart cup holder can accommodate 10oz to 20oz water cups, drinks, and cans, or even those with greater capacity. Please note that the maximum diameter of the cup should not exceed 3 inches.
- Rod Holders and Bait Holders The marine cup holders for boats with a hollowed-out bottom supports the holding of fishing rods, water bottles, or travel mugs with handles. Additionally, there are holes for bait, which enable quick and convenient retrieval.
- Easy to Install Attach the non-slip pads to the clamp, ensuring they are aligned with the center of the boat pole. Adjust the clamp to fit the size of the boat pole. Place the bolt on the clamp. Tighten the thumb nut. The two cup holders can be removed if needed.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 5.31 x 8.46 x 7.28 inches
See On Amazon #10
Kemimoto Motorcycle Cup Holder, Upgraded ATV Drink Holder with 0.6"-1.5" Metal Clamp, 32OZ Bike Water Bottle Holder for Motorcycle, ATV/UTV, Scooter, Bike, Boat, Stroller, Wheelchair, Golf, Tractor
Asin: B0C5D14KP3 | Model: Metal Clamp | PartNumber: Metal Clamp
【Wide Compatibility 0.6”-1.5”】The Alligator Clamp Of This Boat Cup Holder Fits Handlebars And Poles With A Diameter Of 0.6"-1.5". It Is Suitable For Most Atvs, Motorcycles, Bikes, 4 Wheeler, Boat, Stroller, Walker, Wheelchair, Scooter, And Golf Carts. And It Is Easy To Install And Remove With A Hand Screw Design..
【Durable& Rustproof】The Magnetic Can Holder For Tractors Is Made Of Aluminum Alloy Which Is Extremely Sturdy And Durable. Our Magnetic Cup Caddy Has A Coating On The Outside To Prevent Rust For Improved Durability, Thus It Can Be Used For Many Years..
【Secures Tightly Without Tipping Or Spilling】 This Water Bottle Holder With Proprietary Material, Makes It Easy To Add Or Remove Your Bottle. The Provided Silicone Coaster Prevents Bottles From Rattling While Driving. With 5 Little Bottom Drain Holes, Won't Accumulate Water On The Bottom, For Easy Cleaning. Note: Our Coasters Are Already Placed Inside The Cup Holder, Ready For Immediate Use..
【Max Load Capacity Of 32Oz】Kemimoto's Upgraded Atv Cup Holder Can Hold Almost All Types Of Large Cups And Water Bottles Up To 32Oz, Including Cans Of Beer, Soft Drinks, And Stainless Steel Bottles. Compatible With Stanley Yeti Contigo Nalgene Water Bottle..
Features
- Upgraded Strong Metal Alligator Clamp Compared with other cup holders the kemimoto bike cup holder is made of durable and sturdy metal material; the crocodile bite design can obtain a stronger grip, not easy to slip or vibrate. Our motorcycle cup holder can be installed on both vertical and horizontally-permitted motorcycle frames, allowing for flexible use in different environments.
- Max Load Capacity of 32oz kemimoto's upgraded ATV cup holder can hold almost all types of large cups and water bottles up to 32oz, including cans of beer, soft drinks, and stainless steel bottles. Compatible with Stanley Yeti Contigo Nalgene water bottle.
- Wide Compatibility 0.6 -1.5 The alligator clamp of this boat cup holder fits handlebars and poles with a diameter of 0.6-1.5. It is suitable for most ATVs, motorcycles, bikes, 4 Wheeler, Boat, Stroller, Walker, Wheelchair, Scooter, and Golf carts. And it is easy to install and remove with a hand screw design.
- Secures Tightly without Tipping or Spilling This water bottle holder with proprietary material, makes it easy to add or remove your bottle. The provided silicone coaster prevents bottles from rattling while driving. With 5 little bottom drain holes, won't accumulate water on the bottom, for easy cleaning. NOTE: Our coasters are already placed inside the cup holder, ready for immediate use.
- Durable& Rustproof The Magnetic can holder for tractors is made of aluminum alloy which is extremely sturdy and durable. Our magnetic cup caddy has a coating on the outside to prevent rust for improved durability, thus it can be used for many years.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
Dimensions: 4.72 x 5.12 x 4.92 inches
Warranty: 24-Month Warranty
See On Amazon #11
KEMIMOTO ATV Fender Bag with Cup Holder 2 Pack Universal ATV Storage Bags 1680D Four-Wheeler Tank bags Front/Rear Fender Saddle Bag Compatible with Sportsman Fourtrax Foreman Outlander Grizzly Cfmoto
Asin: B0D12LHCXC | Model: B0113-07101-BK | PartNumber: B0113-07101-BK
Upgraded Material - Made Of 1680D Oxford, Wear-Resistant, And Not Easy To Tear; Water-Resistant, So Splashed Mud, Dust, And Debris Do Not Easily Penetrate The Bag. Kemimoto Black Atv Fender Bags Will Keep Your Items As Clean And Dry As When You Put Them In The Atv Gear Bag. Upgraded Covered Sbs Waterproof Zipper Can Prevent Mud Stains From Accumulating On The Surface Of The Zipper And Causing The Zipper To Jam, Greatly Extending The Service Life Of The Zipper..
Easy Installation - No Tools Installation. You Can Install The Bag On The Front Or Rear Fender. Two Quick-Release Straps On The Upper And Lower Ends Of Each Bag Can Be Tied To The Frame Of The Atv. The Self-Adhesive Strips On The Back Can Be Attached To The Vehicle Body To Secure The Atv Rear Fender Bag. Atv Fender Storage Bags Are Not Easy To Move Even On Bumpy Trails. The Size Of The Top Bag Is 7.5*8.3 Inches; The Bottom Bag Is 11.4*8.3 Inches. The Dimensions Of Each Bag Are As Our Pictures Showed..
Safety Escort At Night - Reflective Strips On The Atv Fender Bags Waterproof Make Your Atv Easier To See In Low Light Conditions, And Also Make It Easier To Find The Bag's Location At Night.Kemimoto Atv Fender Bag With Drink Holder Is A Great Addition To Your Atv. Small Fender Bags For Atvs Are Also A Good Gift For Your Son, Partner, Parents, And Friends..
Multiple Pockets Design - The Different Compartments Are Fine For Keeping Things Separated. You Can Store Your Gloves, Small Tool Kits, Flashlights, Maps, Snacks, Med Kits, Rain Gear, Etc. Also, You Can Store Cell Phones, Cards, Keys, And Other Small Precious Items In The Detachable Clutch Purse. Take It With You If You Go For A Walk. The Hidden Water Cup Bag Design In Each Atv Tool Bag Allows You To Store Your Drinks (Within 8Cm In Diameter) In It. Just Store It In The Bag When Not In Use.
Features
- Extra Storage - Do you need to hold a lot of stuff on your ATV? Are you tired of carrying bulky luggage rack bags or suitcases? KEMIMOTO 2-pack ATV fender bags are great value for extra storage. You can quickly and easily reach without having to stop and mess with a large storage box. KEMIMOTO fender bag for ATV will not interfere with any operations at all. Universal ATV storage bags fit most ATVs, such as compatible with Polaris Rancher Can-Am Kawasaki Brute Force Arctic Cat ATV fender bag
- Multiple Pockets Design - The different compartments are fine for keeping things separated. You can store your gloves, small tool kits, flashlights, maps, snacks, med kits, rain gear, etc. Also, you can store cell phones, cards, keys, and other small precious items in the detachable clutch purse. Take it with you if you go for a walk. The hidden water cup bag design in each ATV tool bag allows you to store your drinks (within 8cm in diameter) in it. Just store it in the bag when not in use
- Upgraded Material - Made of 1680D Oxford, wear-resistant, and not easy to tear; water-resistant, so splashed mud, dust, and debris do not easily penetrate the bag. KEMIMOTO black ATV fender bags will keep your items as clean and dry as when you put them in the ATV gear bag. Upgraded covered SBS waterproof zipper can prevent mud stains from accumulating on the surface of the zipper and causing the zipper to jam, greatly extending the service life of the zipper.
- Safety Escort at Night - Reflective strips on the ATV fender bags waterproof make your ATV easier to see in low light conditions, and also make it easier to find the bag's location at night.KEMIMOTO ATV fender bag with drink holder is a great addition to your ATV. Small Fender bags for ATVs are also a good gift for your son, partner, parents, and friends.
- Easy installation - No tools installation. You can install the bag on the front or rear fender. Two quick-release straps on the upper and lower ends of each bag can be tied to the frame of the ATV. The self-adhesive strips on the back can be attached to the vehicle body to secure the ATV rear fender bag. ATV fender storage bags are Not easy to move even on bumpy trails. The size of the top bag is 7.5*8.3 inches; the bottom bag is 11.4*8.3 inches. The dimensions of each bag are as our pictures showed.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
See On Amazon #12
KEMIMOTO Cup Holder Expander for Car, Compatible with Hydro Flask 32/40oz, Yeti 24/30/36oz, Stanley, Other Bottles in 18-40oz, Large Cup Holder Adapter Fits for Universal Vehicle
Asin: B08PRQXK7B
【Anti-Vibration Rubber Base Maintain Steady】The Sturdy Rubber Base Of The Car Cup Holder Extender Guarantees A Secure Fit With The Console Cup Holder, And The Whole Process Takes Just A Few Seconds And No Additional Effort Or Tools..
【Must Have】This Expandable Cup Holder Fits Most Vehicles, Golf Carts, Rvs, Utvs, And Trucks, Aiming To Make The Low And Small Car Cup Holders Bigger And More Compatible. In Addition, The Kemimoto Car Cup Holder Expander Adapter Owns A Patented Design..
【Stable Like Holding By Hand】The Cupstation's Four Detachable Rubber Tabs Make It Possible To Safely Keep Bottles Or Coffee Mugs Of Most Sizes In Place Without Fear Of Them Toppling Over. You May Also Use Your Large Cup In The Car Bottle Holder By Removing The Tabs..
【Wider Compatibility】The Car Cup Adapter Can Hold Most 18-40 Oz Water Bottles Or Coffee Mugs, Which Is Compatible With Yeti 20-36Oz, Hydroflask 32 40Oz, Nalgene 16-40Oz, Stanley, Contigo, Etc..
Features
- Upgraded Compatibility The upgraded car drink holder expander ensures a more secure fit in a wider variety of automobile cup holders. The SHORT BASE is optimized for cylindrical cup holders between 2.75 and 3.25 inches in diameter and the LONG BASE can fit into a square or recessed cup holder. Please confirm which model will fit best for you.
- Wider Compatibility The car cup adapter can hold most 18-40 OZ water bottles or coffee mugs, which is compatible with Yeti 20-36oz, Hydroflask 32 40oz, Nalgene 16-40oz, Stanley, Contigo, etc.
- Anti-vibration Rubber Base Maintain Steady The sturdy rubber base of the car cup holder extender guarantees a secure fit with the console cup holder, and the whole process takes just a few seconds and no additional effort or tools.
- Stable Like Holding by Hand The cupstation's four detachable rubber tabs make it possible to safely keep bottles or coffee mugs of most sizes in place without fear of them toppling over. You may also use your large cup in the car bottle holder by removing the tabs.
- Must Have This expandable cup holder fits most vehicles, golf carts, RVs, UTVs, and trucks, aiming to make the low and small car cup holders bigger and more compatible. In addition, the kemimoto car cup holder expander adapter owns a patented design.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 1.70 x 2.71 x 1.70 Inches
Warranty: Manufacturer warranty for 12 months from date of purchase.
See On Amazon #13
KEMIMOTO Gun Holder Rack, UTV Rifle Gun Holder Compatible with Polaris Ranger & General, Mount on The Dash Cup Holder or Cargo Bed, Shovel Mount Bow Rack
Asin: B0BKK7ZV4J | Model: B1709-00101BK | PartNumber: B1709-00101BK
Versatile Installation Options: It Can Be Directly Mounted To Any Drillable Flat Surface Or Fitted Into A 2.75"-3.25" Round Cup Holder At A Suitable Location In Any Vehicle..
Versatile Use: Our Rack Stores More Than Shotguns And Rifles; It's Also Perfect For Crossbows, Shovels, Agricultural Equipment, And Other Items..
Stable & Scratch-Resistant: The Plastic Base Mounts On The Floor Of The Utv Or Cargo Bed For Improved Stability, Preventing Your Guns From Sliding And Scratching..
Widely Fitment: The Gun Holder Can Also Be Installed On The Cargo Bed (Tie-Down Anchor Not Included), Compatible With Polaris Ranger & General..
Features
- Easy to Install: This gun holder rack is primarily designed for installation in the cup holder of the dashboard and can easily be removed or repositioned.
- Widely Fitment: The gun holder can also be installed on the cargo bed (tie-down anchor not included), compatible with Polaris Ranger & General.
- Versatile Installation Options: It can be directly mounted to any drillable flat surface or fitted into a 2.75-3.25 round cup holder at a suitable location in any vehicle.
- Stable & Scratch-Resistant: The plastic base mounts on the floor of the UTV or cargo bed for improved stability, preventing your guns from sliding and scratching.
- Versatile Use: Our rack stores more than shotguns and rifles; it's also perfect for crossbows, shovels, agricultural equipment, and other items.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimotohunting
Weight: 3.35 pounds
Warranty: We back up our products with a premium 12-month warranty for any purchase through Amazon, and you can reach out to us whenever you have a problem, day or night. We back our products with a quality 12-month warranty for any purchase through Amazon and provide round-the-clock support if you experience any issues.
See On Amazon #14
KEMIMOTO Motorcycle Cup Holder, ATV Drink Holder with 360 Rotation Crocodile-Bite Clamp, Dirt Bike Bottle Holder Compatible with Hydro Flasks, Yeti, Stanley, Other Bottles Maximum Diameter in 3.5"
Asin: B094NFYLJ4 | Model: B0113-06702BK(2) | PartNumber: B0113-06702BK(2)
【Larger Capacity】Kemimoto Atv Cup Holder 12Oz-28 Oz With An Adjustable Bottom Design Can Accommodate Bottles With A Maximum Diameter Of 3.5 Inches. Universally Suitable With Water Bottles, Drink Bottles, Coffee Mugs, Beverage Cans, Etc. Easily Meets Your Diverse Needs At Any Time. Compatible With 18/21/24Oz Hydro Flasks, 12/18/26Oz Yeti, 16/20/24Oz Nalgene, Camelbak, And So On..
【Easy Installation】Dirt Bike Cup Holders Adjustable Can Be Mounted By Yourself Within Minutes. Detailed Instructions, Tools, And Hardware Required For Installation Are All Provided In The Package..
【Upgraded 360-Degree Adjustment】Handlebar Cup Holders For Four-Wheelers Equipped With A 360-Degree Adjustable And Crocodile-Bite Design Metal Clamp Allow The Option Of Installation Positions More Varied As You Desired. An Additional Anti-Slip Rubber Pad Helps Fit The Handlebar Firmly And Effectively Protects Your Vehicle From Scratches..
【Superior Durability And Stronger Grip】Kemimoto Cup Holders Made Of High-Impact Plastic Housing Are More Durable And Scratching-Proof. Its Heavy-Duty Metal Clamp Offers A Stronger Grip And Load-Bearing Capacity, Steadily Preventing Your Drinks From Spilling And Falling..
Features
- Universal Applicable Kemimoto motorcycle cup holders can multi-functionally fit mountain bicycles, road bikes, motorcycles, ATVs, scooters, boats, wheelchairs, walkers, and strollers with 0.6-1.56 inches handlebars. One-handed operation is allowed while you're thirsty on a journey, making you feel free at any time and anywhere.
- Superior Durability and Stronger Grip Kemimoto cup holders made of high-impact plastic housing are more durable and scratching-proof. Its heavy-duty metal clamp offers a stronger grip and load-bearing capacity, steadily preventing your drinks from spilling and falling.
- Larger Capacity Kemimoto ATV cup holder 12oz-28 oz with an adjustable bottom design can accommodate bottles with a maximum diameter of 3.5 inches. Universally suitable with water bottles, drink bottles, coffee mugs, beverage cans, etc. Easily meets your diverse needs at any time. Compatible with 18/21/24oz Hydro Flasks, 12/18/26oz Yeti, 16/20/24oz Nalgene, Camelbak, and so on.
- Upgraded 360-Degree Adjustment Handlebar cup holders for four-wheelers equipped with a 360-degree adjustable and crocodile-bite design metal clamp allow the option of installation positions more varied as you desired. An additional anti-slip rubber pad helps fit the handlebar firmly and effectively protects your vehicle from scratches.
- Easy Installation Dirt bike cup holders adjustable can be mounted by yourself within minutes. Detailed instructions, tools, and hardware required for installation are all provided in the package.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
See On Amazon #15
KEMIMOTO Walker Cup Holder, Wheelchair Cup Holder, Oxford Fabric Drink Cup Holder with Alligator Clamp for Stroller, Scooter, Wheelchair, Walker, Motorcycle, ATV, Bike, Golf Cart, Black
Asin: B0C18XXF4H
【2 Installation Angles】This Walker Cup Holder Features A Versatile Clamp That Can Be Installed At Two Different Angles, Allowing For Both Horizontal And Vertical Mounting Options. This Means That You Can Adjust The Angle Of The Cup Holder To Best Suit Your Needs And Preferences..
【With Tightening Drawstring】The Adjustable Top Drawstring Is Reinforced And Tight. You Can Cinch Down On The Top To Hold The Drink Firm If The Going Gets Bumpy Keeping It From Flopping Around Along Your Trips..
【Up To 24Oz Capacity】Our Bike Cup Holder Handlebar Is Designed To Accommodate Cups With A Maximum Capacity Of 24Oz And A Bottom Diameter Of Up To 3.94 Inches. Before Making Your Purchase, It Is Important To Compare These Dimensions With The Size Of Your Preferred Cup To Ensure A Proper Fit. Not Compatible With Road King, Spyder Rt, Burgman 400S..
【Easy To Install On 0.6"-1.5" Pole】The Alligator Clamp Of This Scooter Cup Holder Fits 0.6"-1.5" Diameter Handlebars/Pole, Please Confirm The Diameter Of Your Handlebar/Pole Before Purchasing. And It Is Easy To Install And Remove With A Hand Screw Design..
Features
- Sturdy Alligator Clamp Our wheelchair cup holder with a sturdy aluminum clamp design, which provides superior stability compared to our other's ABS plastic clamp. The aluminum clamp not only adds durability but also gives a sleek and modern look to the cup holder. You can trust that your drink will be secure and easily accessible while on the go with your family.
- Easy to Install on 0.6-1.5 Pole The alligator clamp of this Scooter cup holder fits 0.6-1.5 diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.
- 2 installation angles This walker cup holder features a versatile clamp that can be installed at two different angles, allowing for both horizontal and vertical mounting options. This means that you can adjust the angle of the cup holder to best suit your needs and preferences.
- Up to 24oz Capacity Our bike cup holder handlebar is designed to accommodate cups with a maximum capacity of 24oz and a bottom diameter of up to 3.94 inches. Before making your purchase, it is important to compare these dimensions with the size of your preferred cup to ensure a proper fit. Not Compatible with Road King, Spyder RT, Burgman 400s.
- With Tightening Drawstring The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your trips.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
See On Amazon #16
KEMIMOTO Motorcycle Saddlebags Throw Over Saddle bags Panniers 20L Side Bags with cup holder and lock for Sportster Softail Dyna Road King Synthetic Leather Universal, 1 Pair, Black
Asin: B08MXPV4RP | Model: HDBAG01-01901BK | PartNumber: HDBAG01-01901BK
Dry & Wet Separation: The Saddle Bags Contain A Cup Holder. This Upgrade Will Prevent Your Stuff From Getting Wet Because Of Water Leakage, And You Can Also Easily Access Your Bottle..
Always Keep Shape: This Motorcycle Saddlebag Has An Inner Hard Shape And It Is Not Easy To Deform. Compared With The Traditional Canvas Saddle Bags For Motorcycles, They Will Not Sag Even If Your Bag Is Empty..
Quick Access: Two Easy Ways To Open Your Bag Are The Pin Buckle & And The Quick-Release Buckle. The Bags Are Also Lockable By A Lock (Not Included In Package). The Quick-Release Buckle Make You Easier Access Your Stuffs..
Enough Space To Storage: 11.8''(L) * 6''(W) * 10.2''(H) Cm, Providing Large Enough Space To Store Some Regular Stuff Like Jackets, Water Bottles, Power Banks, Sunglasses, Wallets, Smartphones, And Food..
Features
- Wide Suitability: These motorcycle saddlebags are universal, and fit for many motorcycle models including but not limited to Sportster Softail Dyna Road King V-star, Shadow, Vulcan. (PS: Please make sure the clearance between the saddlebags and top exhaust.)
- Enough Space to Storage: 11.8''(L) * 6''(W) * 10.2''(H) cm, providing large enough space to store some regular stuff like jackets, water bottles, power banks, sunglasses, wallets, smartphones, and food.
- Dry & Wet Separation: The saddle bags contain a cup holder. This upgrade will prevent your stuff from getting wet because of water leakage, and you can also easily access your bottle.
- Quick Access: Two easy ways to open your bag are the pin buckle & and the quick-release buckle. The bags are also lockable by a lock (Not included in Package). The quick-release buckle make you easier access your stuffs.
- Always keep shape: This motorcycle saddlebag has an inner hard shape and it is not easy to deform. Compared with the traditional canvas saddle bags for motorcycles, they will not sag even if your bag is empty.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 10.20 x 11.80 x 6.00 inches | Weight: 4.19 pounds
See On Amazon #17
KEMIMOTO Motorcycle Cup Holder, ATV Drink Holder with 360 Rotation Crocodile-Bite Clamp, Dirt Bike Bottle Holder Compatible with Hydro Flasks, Yeti, Stanley, Other Bottles Maximum Diameter in 3.5"
Asin: B094NH12QS | Model: B0113-06702BK | PartNumber: B0113-06702BK
【Larger Capacity】Kemimoto Atv Cup Holder 12Oz-28 Oz With An Adjustable Bottom Design Can Accommodate Bottles With A Maximum Diameter Of 3.5 Inches. Universally Suitable With Water Bottles, Drink Bottles, Coffee Mugs, And Beverage Cans, Etc. Easily Meets Your Diverse Needs At Any Time. Compatible With 18/21/24Oz Hydro Flasks, 12/18/26Oz Yeti, 16/20/24Oz Nalgene, Camelbak, And So On..
【Easy Installation】Dirt Bike Cup Holder Adjustable Can Be Mounted By Yourself Within Minutes. Detailed Instructions, Tools, And Hardware Required For Installation Are All Provided In The Package..
【Upgraded 360-Degree Adjustment】Handlebar Cup Holder For Four Wheeler Equipped With A 360-Degree Adjustable And Crocodile-Bite Design Metal Clamp Allows The Option Of Installation Positions More Varied As You Desired. An Additional Anti-Slip Rubber Pad Helps Fit The Handlebar Firmly And Effectively Protects Your Vehicle From Scratches..
【Superior Durability And Stronger Grip】Kemimoto Cup Holder Made Of A High-Impact Plastic Housing Is More Durable And Scratching-Proof. And Its Heavy-Duty Metal Clamp Behind Offers A Stronger Grip And Load-Bearing Capacity, Steadily Preventing Your Drinks From Spilling And Falling Down..
Features
- Universal Applicable Kemimoto motorcycle cup holder can multi-functionally fit mountain bicycles, road bikes, motorcycles, ATVs, scooters, boats, wheelchairs, walkers, strollers with 0.6-1.56 inches handlebar. One-handed operation is allowed while you're thirsty on a journey, makes you feel free at any time and anywhere.
- Superior Durability and Stronger Grip Kemimoto cup holder made of a high-impact plastic housing is more durable and scratching-proof. And its heavy-duty metal clamp behind offers a stronger grip and load-bearing capacity, steadily preventing your drinks from spilling and falling down.
- Larger Capacity Kemimoto ATV cup holder 12oz-28 oz with an adjustable bottom design can accommodate bottles with a maximum diameter of 3.5 inches. Universally suitable with water bottles, drink bottles, coffee mugs, and beverage cans, etc. Easily meets your diverse needs at any time. Compatible with 18/21/24oz Hydro Flasks, 12/18/26oz Yeti, 16/20/24oz Nalgene, Camelbak, and so on.
- Upgraded 360-Degree Adjustment Handlebar cup holder for four wheeler equipped with a 360-degree adjustable and crocodile-bite design metal clamp allows the option of installation positions more varied as you desired. An additional anti-slip rubber pad helps fit the handlebar firmly and effectively protects your vehicle from scratches.
- Easy Installation Dirt bike cup holder adjustable can be mounted by yourself within minutes. Detailed instructions, tools, and hardware required for installation are all provided in the package.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
See On Amazon #18
KEMIMOTO Bike Cup Holder, Bike Water Bottle Holder Handlebar with Mesh Pockets No Screw Oxford Fabric Bicycle Drink Cup Holder for Mountain Bike Road Kids Bikes e-Bike Cruiser up to 32oz, 2 Pack
Asin: B08S3SQFXJ
【Fit Most Size Of Bottle】 The Bike Water Bottle Holder With Drawstring Design, Which Can Shrink Freely To Fit 12 Oz - 32 Oz Size Bottle, No More Spilled Drinks. Perfect For Holding Your Coffee, Soft Drinks, And Stainless Steel Bottle..
【Durable Bicycle Cup Holder】 Be Made Of High-Quality Oxford Fabric Instead Of Other Stainless Steel Or Plastic Holders, Durable And Washable. Don’T Worry About Rusty And Broken After 2-3 Months. This Water Bottle Holder For Bikes Is A Great Present For Anyone Who Loves To Bike, E-Bike, Or Cruiser..
【Hold Your Water Bottle Steadily】 The Fixing Position Presents A Stable Triangular Structure, The Bike Coffee Cup Holder Will Be Firmly Fixed On Your Bicycle Even On Rough Mountain Roads. And The Design Of A Sponge Inside Could Provide Some Protection For Your Bottle Or Small Items In The Mesh Pocket..
【Free Your Hands】 The Bike Drink Cup Holder Has Two Separate Mesh Pockets, So You Can Carry Some Small Items Like Cell Phones, Sunglasses, Goggles, Keys, Wallet..
Features
- Wide Application This upgraded bike cup holder has 4 hook&loop straps that could be easily attached on the left or right side of 0.9" to 2" diameter handlebars. Like road bikes, mountain bikes, electric bikes, folding bikes, kid's bikes, cruisers, wheelchairs, scooters, etc.
- Free Your Hands The bike drink cup holder has two separate mesh pockets, so you can carry some small items like cell phones, sunglasses, goggles, keys, wallet.
- Fit Most Size of Bottle The bike water bottle holder with drawstring design, which can shrink freely to fit 12 oz - 32 oz size bottle, no more spilled drinks. Perfect for holding your coffee, soft drinks, and stainless steel bottle.
- Hold Your Water Bottle Steadily The fixing position presents a stable triangular structure, the bike coffee cup holder will be firmly fixed on your bicycle even on rough mountain roads. And the design of a sponge inside could provide some protection for your bottle or small items in the mesh pocket.
- Durable Bicycle Cup Holder Be made of high-quality Oxford fabric instead of other stainless steel or plastic holders, durable and washable. Don t worry about rusty and broken after 2-3 months. This water bottle holder for bikes is a great present for anyone who loves to bike, e-bike, or cruiser.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Warranty: Manufacturer warranty for 12 months from date of purchase.
See On Amazon #19
KEMIMOTO Upgraded ATV/Bike Cup Holder 2.0, Motorcycle Cup Holder Handlebar Bike Water Bottle Holder with 0.6 -1.56 Metal Clamp Universal for ATV Scooter Boat Stroller Wheelchair Golf Cart Red
Asin: B0B8DD61B4 | Model: B0113-06701RD | PartNumber: B0113-06701RD
【Upgraded 3.5 In Adjustable Holder】The Maximum Adapted Diameter Of The Motorcycle Cup Holder Is 3.5 Inches. The Capacity Of The Motorcycle Drink Holder Can Be Manually Adjusted At The Bottom. Flexible Arms Allow For Different Size Cups (Ordinary Water Cups/Bottles/Cans, Travel Mugs, Beverages) And Most Bluetooth-Compatible Speakers, Which Are Good Motorcycle Handlebar Accessories..
【Wide Compatibility 0.6”-1.56”】The Mount Range Of Kemimoto Bike Cup Holder Is 0.6 In-1.56 In. It Is Suitable For Different Handlebars And Different Occasions, Most Atvs, Motorcycles, Bikes, 4 Wheeler, Boats, Strollers, Walkers, Wheelchairs, Scooters, Golf Carts Can Be Applied, Compatible With Polaris Sportsman Scrambler Rancher Can-Am, And So On. This Is Also A Portable Speaker Mount With Wide Compatibility And Application. Compatible With Stanley Yeti Contigo Nalgene Water Bottle..
【Strong Metal Clamp&Crocodile Bite Design】Compared With Other Cup Holders, The Kemimoto Atv Cup Holder Is Made Of Durable And Sturdy Metal Material; The Crocodile Bite Design For This Motorcycle Cup Holder Can Obtain A Stronger Grip, Not Easy To Slip Or Vibrate. Meanwhile, 2 Pieces Of Anti-Skip Pad Gaskets Will Be Provided To Fit Handlebars Better..
【Upgraded 28Oz Load Capacity】Kemimoto's Upgraded Motorcycle Cup Holder Provides A Higher Load-Bearing Capacity. After Testing, The Maximum Load-Bearing Capacity Of Kemimoto Atv Cup Holder Can Reach 28Oz. Don't Worry About Breaking Or Falling If Your Bottle Weighs Below 28Oz..
Features
- Upgraded Anti-Break PP Material This bike water bottle holder is version 2.0. The upgraded bike cup holder is made of tougher, crack-proof, thicker PP material. This holder grips hard enough and is not easy to bounce up and down or fall off while going over rough terrain.
- Upgraded 28oz Load Capacity kemimoto's upgraded motorcycle cup holder provides a higher load-bearing capacity. After testing, the maximum load-bearing capacity of kemimoto ATV cup holder can reach 28oz. Don't worry about breaking or falling if your bottle weighs below 28oz.
- Upgraded 3.5 In Adjustable Holder The maximum adapted diameter of the motorcycle cup holder is 3.5 inches. The capacity of the motorcycle drink holder can be manually adjusted at the bottom. Flexible arms allow for different size cups (ordinary water cups/bottles/cans, travel mugs, beverages) and most Bluetooth-compatible speakers, which are good motorcycle handlebar accessories.
- Strong Metal Clamp&Crocodile Bite Design Compared with other cup holders, the kemimoto ATV cup holder is made of durable and sturdy metal material; the crocodile bite design for this motorcycle cup holder can obtain a stronger grip, not easy to slip or vibrate. Meanwhile, 2 pieces of anti-skip pad gaskets will be provided to fit handlebars better.
- Wide Compatibility 0.6 -1.56 The mount range of kemimoto bike cup holder is 0.6 in-1.56 in. It is suitable for different handlebars and different occasions, Most ATVs, motorcycles, bikes, 4 Wheeler, boats, strollers, walkers, wheelchairs, scooters, Golf carts can be applied, compatible with Polaris Sportsman Scrambler Rancher Can-Am, and so on. This is also a portable speaker mount with wide compatibility and application. Compatible with Stanley Yeti Contigo Nalgene water bottle.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
Dimensions: 3.15 x 8.27 x 4.33 Inches
Warranty: 1 year
See On Amazon #20
KEMIMOTO Driver Floorboard Extensions, Driver Floorboard Extenders kit 1'' Compatible with 2009-2019 2020 2021 2022 Touring Models Road King Electra Glide Road Glide Include Bolts and Spacers
Asin: B08PCZM8ZW | Model: HALEI01101BK | PartNumber: HALEI01101BK
【Premium Material】Cnc Extension Parts Are Made Of Premium Aluminum. Bolts And Spacers Consist Of Steel..
【Package】These Floorboard Extenders Are 100% Brand New, And There Is No Recycle Material. Package Includes 1 Floorboard Extension Kit And 6 Bolts And 4 Grommets..
【Unavailable Situation】The Floorboard Extension Cannot Work With Chrome Display Stand. They Will Not Fit 14' Later Trikes Models With The Floorboard E-Brake And Softails Models..
【 A Better Place For Your Feet】The Floorboard Extensions Extend 1'' Outward For Your Driver Floorboards Pedal, Which Allows Your Feet To Use A Full Floorboard And Improve Your Comfort During Long Driving..
Features
- Suitability The floorboard extension kits are compatible with 2009-2015 2016 2017 2018 2019 2020 2021 2022 Touring Models including Electra Glides, Road Glides, Road Kings, Street Glides FLHT FLHR FLTR FLHX and 2009-2013 FL Trikes. (More available models can be referred to the Product Description.)
- A Better Place for Your Feet The floorboard extensions extend 1'' outward for your driver floorboards pedal, which allows your feet to use a full floorboard and improve your comfort during long driving.
- Premium Material CNC extension parts are made of premium aluminum. Bolts and spacers consist of steel.
- Unavailable Situation The floorboard extension cannot work with chrome display stand. They will not fit 14' later Trikes Models with the floorboard E-brake and Softails Models.
- Package These floorboard extenders are 100% brand new, and there is no recycle material. Package includes 1 floorboard extension kit and 6 bolts and 4 grommets.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: kemimoto
Warranty: NoWarningApplicable
See On Amazon
Looking For Something Else?
Search