NuoDunco 1 Pack 1/8" Shank Sanding Cone Mounting Mandrel
Asin: B0C7MN5V5H | Model: 31801 | PartNumber: 31801 | Ean: 0720707245381 | UPC: 720707245381
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Universal Design Fits Most Sanding Cone Cartridge Rolls.
Features
- 1/8" Shank Mandrel suit for Dremel, Micro Die Grinder, Drill Rotary Tool, Pneumatic Tools.
- Universal design fits most Sanding Cone Cartridge Rolls
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NuoDunco
See On Amazon Similar To NuoDunco 1 Pack 1 8
#1
Diamond Sanding Bits for Dremel Rotary Tool, Grinding Stone Sanding Drill Bits with 1/8" Shank Gift for Craft Lovers - Metal & Woodworking/DIY Craft Making - 150 Grit 1 Pack
Asin: B0CBRT615W | Ean: 0730140392863 | UPC: 730140392863
šćPerformance As Expectedć: 150 Grit Industrial Grade Abrasive Wheel, 0.4 Inch Width Diamond Plating Technology Process As Long As You Do Not Wear Through The Metal Layer It Will Still Working, Strong And Sharp Diamond Particles Under High Intensity Use And Still Maintain Excellent Grinding Performance..
šćDiy Hobbyist Toolsć: It Has Such A Remarkable Weight And Feel That When The Rotary Tool Is Held In Your Hand, It's Like Holding A Pairing Knife And Using It Like You're Whittling Something. The Spinning Wheel Doesn't Wobble Or Bounce At All, So The Cuts Are Smooth And Clean Without Harming Areas You Don't Want To Work On..
šćNoteć: Tips For Use, Running Speed Between 7,000~15,000 Rpm Are Enough For Most Uses, The Wheel Too Heavy For Higher This Speed, Exceeding The Maximum Speed May Cause The Drill Bit To Skip, Reducing Grinding Results And In Severe Cases, Even Causing The Rod To Bend..
šćWide Compatibilityć: The 1/8" Shank Makes The Grinding Stone Suitable For Use With Most Dremel Rotary Tools, Other Electric Drills, Cordless Drills And Die Grinders..
šćLonger Lifeć: As You Can See The Thick Multi-Layer Alloy Steel Body, No Need To Worry About The Risk Of Splinters And Breakage, And Excellent Heat And Corrosion Resistance, Covered With Sharp Diamond Particles Won't Be Dislodged Or Deformed By Repeated Use, Just One Is Enough For Any Sanding Job..
Features
- Wide Application : Rotary Tool Diamond Sanding Bits can be used for a variety of purposes, such as DIY resin and jewelry or stained glass crafting, grinding stone sculptures, sharpening metal tools such as lawn mower blades, screwdriver tips, knives, scissors, for sanding and grinding finishing carvings for woodworking and more.
- Longer Life : As you can see the thick multi-layer alloy steel body, no need to worry about the risk of splinters and breakage, and excellent heat and corrosion resistance, covered with sharp diamond particles won't be dislodged or deformed by repeated use, just one is enough for any sanding job.
- Performance as Expected : 150 Grit Industrial Grade Abrasive Wheel, 0.4 inch width diamond plating technology process as long as you do not wear through the metal layer it will still working, strong and sharp diamond particles under high intensity use and still maintain excellent grinding performance.
- Wide Compatibility : The 1/8 shank makes the grinding stone suitable for use with most Dremel rotary tools, other electric drills, cordless drills and die grinders.
- DIY Hobbyist Tools : It has such a remarkable weight and feel that when the rotary tool is held in your hand, it's like holding a pairing knife and using it like you're whittling something. The spinning wheel doesn't wobble or bounce at all, so the cuts are smooth and clean without harming areas you don't want to work on.
- Note : Tips for use, running speed between 7,000~15,000 RPM are enough for most uses, the wheel too heavy for higher this speed, exceeding the maximum speed may cause the drill bit to skip, reducing grinding results and in severe cases, even causing the rod to bend.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NUODUNCO
See On Amazon #2
Sbestily 2 Inch Diamond Cut Off Wheel with 1/4 Stem Mounting Mandrel for Die Grinder, W1/4" Arbor Hole Carbide Cutting Discs for Metal & Stainless Steel Drill Attachment Cutter Disc
Asin: B0CRHD9K1F | Model: DIAMOND CUT | PartNumber: DIAMOND CUT | Ean: 0730140393525 | UPC: 730140393525
ćMaterialć: Carbide Steel Body, 0.04 Inches Thick, High Hardness, High Heat Resistance, High Sharpness. The One Cut Off Wheel To Have When You're Having More Than One..
ćNoteć: Tips For Use, Use In 700~1500 Rpm Electric Drill Is Enough To Meet Most General Needs, If You Cut Metal Frequently Then A 7000~15000 Rpm Die Grinder Would Be A Nice Choice, The Maximum Speed Is 20000Rpm, Please Avoid Using At Higher Or Equal To This Speed..
ćPerformanceć: Industrial-Grade Razor-Sharp Diamond Particles Are Highly Aggressive And Wear Resistant, Wont Wobble Or Skip When In Use, And Cut With High Precision Without Cutting Off Unwanted Material..
ćDesignć: Put It In A Drill, Lock The Trigger, And It Will Give You A Miniature Cut Off Wheel, Perfect For Cut Steel, Bronze, Brass, Nuts, Bolts, Screws And Even Ceramic, Concrete..
Features
- Size : 1 Set 1/4"Stem Mandrel + 2 Pcs Cutoff Wheel, outside diameter 2 inches (50mm); inside diameter 1/4 inches (6.4mm); thickness: 1/24 inches (1mm);
- Design : Put it in a drill, lock the trigger, and it will give you a miniature cut off wheel, perfect for cut steel, bronze, brass, nuts, bolts, screws and even ceramic, concrete.
- Material : Carbide steel body, 0.04 inches thick, high hardness, high heat resistance, high sharpness. The one cut off wheel to have when you're having more than one.
- Performance : Industrial-grade razor-sharp diamond particles are highly aggressive and wear resistant, wont wobble or skip when in use, and cut with high precision without cutting off unwanted material.
- Note : Tips for use, Use in 700~1500 RPM electric drill is enough to meet most general needs, if you cut metal frequently then a 7000~15000 RPM die grinder would be a nice choice, the maximum speed is 20000RPM, please avoid using at higher or equal to this speed.
- See more on Amazon...
Brand: Sbestily | Manufacturer: Sbestily
Dimensions: 0.10 x 2.00 x 2.00 inches
See On Amazon #3
NuoDunco 2 Inch Cut Off Wheel with 1/4 Stem Mounting Mandrel for Die Grinder, W3/8" Arbor Hole Cutting Wheel for Metal & Stainless Steel Rotary Tool Drill Attachment Cutter Discs
Asin: B0BY8RPS2B | Ean: 0720707244872 | UPC: 720707244872
āćCompatibilityć: It Can Be Mounted On A Small 3/8" Arbor Cutting Tool And Is Recommended To Be Mounted On The Supplied Mounting Shaft And Used On A Drill Or Die Grinder - Sparks May Be Generated When Using This Attachment..
āćApplicationć: Designed To Cutting Steel, Bronze, Brass, Nuts, Bolts, Screws, Ferrous And Non-Ferrous Metals, If You Cut Solid Metal Bars Frequently, Select A Higher Speed For Your Power Tool, And Tighten The Head Before Use..
āćNoteć: If You Use It To Cut Some Pvc Pipes And Soft & Thin Metals Then A Max.1500Rpm 18V Power Drill Will Be Enough, If You Need To Cut Bolts Or Other Hard Metals Please Choose A Die Grinder, After Testing At 7000Rpm It Already Can Cut Some Small Bolts, The Recommended Max.Speed Is 20,000Rpm, Please Avoid Running At This Speed..
āćPerformanceć: The Industrial-Grade Aluminium Oxide Abrasive Layer Is Reinforced On Both Sides With High-Strength Fiberglass Resin Mesh, And The Centre Hole Is Embedded In A High-Quality Stainless Steel Ring, All Working Together To Provide High-Speed Cutting Capability, Long-Lasting Stability And Resistance To Breakage..
āćDesignć: This Is The Perfect Mini Cutting Kit To Keep In Your Toolkit, Ideal For Cutting Jobs Where A Dremel Is Too Big And An Angle Grinder Is Too Small, It Will Save You A Lot Of Budget And Bring Convenience..
Features
- Size : 1 Set 1/4"Stem Mandrel + 5 Pcs Cutoff Wheel, outside diameter 2 inches (51mm); inside diameter 3/8 inches (9.5mm); thickness: 1/12 inches (2mm);
- Design : This is the perfect mini cutting kit to keep in your toolkit, ideal for cutting jobs where a dremel is too big and an angle grinder is too small, It will save you a lot of budget and bring convenience.
- Compatibility : It can be mounted on a small 3/8 arbor cutting tool and is recommended to be mounted on the supplied mounting shaft and used on a drill or die grinder - sparks may be generated when using this attachment.
- Performance : The industrial-grade aluminium oxide abrasive layer is reinforced on both sides with high-strength fiberglass resin mesh, and the centre hole is embedded in a high-quality stainless steel ring, all working together to provide high-speed cutting capability, long-lasting stability and resistance to breakage.
- Application : Designed to cutting steel, bronze, brass, nuts, bolts, screws, ferrous and non-ferrous metals, If you cut solid metal bars frequently, select a higher speed for your power tool, and tighten the head before use.
- Note : If you use it to cut some PVC pipes and soft & thin metals then a max.1500RPM 18V Power Drill will be enough, if you need to cut bolts or other hard metals please choose a Die Grinder, after testing at 7000RPM it already can cut some small bolts, the recommended max.speed is 20,000RPM, Please avoid running at this speed.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NuoDunco
Dimensions: 0.10 x 2.00 x 2.00 inches
See On Amazon #4
Mini Air Sander 1/2/3 Inch Pneumatic Small Orbital Sander for Auto Body Work, Mini Polisher with 45PCS Sanding Discs + 3PCS Backing Pads
Asin: B09GLJLQSC | Ean: 0607029598206, 0607029598343 | UPC: 607029598343, 607029598206
ā
ć Ergonomic Designć: Small Size, Light Weight, Low Vibration, Easy To Take Grip Operation And Knob Speed Adjustment, Simple And Efficient Speed Switch To Adapt To Different Work Needs, Comfortable Grip Handle And Small Habit-Conforming Switch, Smaller Use Vibration Can Be Used For A Long Time Without Tired Hands..
ā
ćSuitable Forć: Ideal For Spot Sanding Focus Areas, Removing Solder Joints And Rust Spots On Metal Products, Deburring Furniture And Woodwork, Mold Manufacturing, Polishing Automotive And Detailing Work, Et. Hand Random Orbital Air Sander Buffer Is Suitable For Grinding, Smoothing And Fine Polishing Of Iron Plate, Wood, Plastic, Metal, Rubber, Stone, Marble And Other Materials..
ā
ćCan Be Used With Various Polishing Padsć: Different Type Of Sandpaper Sanding Disc Can Be Installed With Different Type Of Disc. In Addition To Sandpaper, The Sanding Machine Air Tools Can Also Be Used With Sponge Wool Pads For Car Polishing, Waxing, And Glaze Sealing. You Could Choose A Suitable Pad To Polish Something According To Your Demand..
ā
ćHigh Stabilityćļ¼Si Fang Dual Action Air Polisher Palm Sander Adopts Eccentric Double-Rotation Polishing Method To Make The Polishing Effect More Uniform And Smooth. Low Vibration Rate And Low Energy Consumption ,15000Rpm, Orbit Diameter: 4Mm; Air Consumption: 6-8 Cfm; Working Pressure: 6.3 Bar; Net Weight: 0.68 Kg..
Features
- Package Include : 1 x small air orbital sander , 3Pcs 1inch /2inch /3inch Backing Plates, 15Pcs 1inch Sandpapers Polishing Buffing Pads; 15Pcs 2inch Sandpapers Polishing Buffing Pads; (Note: The grit of sanding discs is random.) 15Pcs 3inch Sandpapers Polishing Buffing Pads; 1Pc screw and 1Pc screwdriver.
- High Stability SI FANG dual action air polisher palm sander adopts eccentric double-rotation polishing method to make the polishing effect more uniform and smooth. low vibration rate and low energy consumption ,15000RPM, Orbit diameter: 4mm; Air consumption: 6-8 CFM; Working pressure: 6.3 BAR; Net weight: 0.68 KG.
- Ergonomic Design : Small Size, Light Weight, Low vibration, Easy to take grip operation and Knob speed adjustment, simple and efficient speed switch to adapt to different work needs, comfortable grip handle and small habit-conforming switch, smaller use vibration can be used for a long time without tired hands.
- Can Be Used With Various Polishing Pads : Different type of sandpaper sanding disc can be installed with different type of disc. In addition to sandpaper, the sanding machine air tools can also be used with sponge wool pads for car polishing, waxing, and glaze sealing. You could choose a suitable pad to polish something according to your demand.
- Suitable For : Ideal for spot sanding focus areas, removing solder joints and rust spots on metal products, deburring furniture and woodwork, mold manufacturing, polishing automotive and detailing work, et. Hand random orbital air sander buffer is suitable for grinding, smoothing and fine polishing of iron plate, wood, plastic, metal, rubber, stone, marble and other materials.
- See more on Amazon...
Brand: SI FANG | Manufacturer: SI FANG
Dimensions: 0.00 x 0.01 x 0.00 inches
See On Amazon #5
NuoDunco 50Pcs 1-1/2 Inch Sand Paper Abrasive Cartridge Rolls Cone Cylinder Rotary Flap Disc 1/4" Die Grinder Sanding Disc Grinding Bits Drum Sanders for Metal Wood Working
Asin: B091SQ733L | Model: nd0000406srp1 | PartNumber: nd0000406srp1 | Ean: 8746030633017
šćBevel Type 27/29ć: Cone Type Roll Just Like Type 29 Flap Disc (80/120/240 Grit 24Pcs) Is Suitable For Most General Purpose; Cylinder Type Roll Like Type 27 Flap Disc (80/100/120 Grit 24Pcs) Is Suitable For High Intensity Jobs Such As Grinding Burrs, Weld Treatments, Mixing Marks, Rust Removal, Even Wood Engraving..
šćNoteć:This Sandpaper Rotary Kit Is Suitable For Most Die Grinder, The Recommended Speed Is 8000~12000Rpm, Between This Speed Can Almost Meet Most Of Your Needs, The Maximum Speed Is 20000Rpm, Please Avoid Running Higher Than Or Equal To The Maximum Speed..
šćIncrease Efficiencyć: Separate Quick-Change Design Allows Switching Between Different Sizes, Grits And Shapes Of Abrasive Cartridge Rolls At Any Time During The Working Process, And The Whole Changeover Process Takes Only A Breath Of Time..
šćAluminum Oxideć: This Is Rolled From High Quality Aluminum Oxide Sandpaper, So When The Outer Layer Wears Out, The Inner Layer Will Still Work, And Rotary Use Reduces Debris Attachment, So You Won't Be Disappointed In Its Longevity..
Features
- Rotary Flap Disc : This is an amazing sanding toolkit designed for the industry that allows you to handle sanding jobs in a more flexible way, using it like a scaled down version of a flap disc, it's so aggressive that it's widely used in automotive shops for metal work.
- Aluminum Oxide : This is rolled from high quality aluminum oxide sandpaper, so when the outer layer wears out, the inner layer will still work, and rotary use reduces debris attachment, so you won't be disappointed in its longevity.
- Bevel Type 27/29 : Cone type roll just like Type 29 flap disc (80/120/240 Grit 24Pcs) is suitable for most general purpose; Cylinder type roll like Type 27 flap disc (80/100/120 Grit 24Pcs) is suitable for high intensity jobs such as grinding burrs, weld treatments, mixing marks, rust removal, even wood engraving.
- Increase Efficiency : Separate quick-change design allows switching between different sizes, grits and shapes of abrasive cartridge rolls at any time during the working process, and the whole changeover process takes only a breath of time.
- Note :This sandpaper rotary kit is suitable for most die grinder, the recommended speed is 8000~12000RPM, between this speed can almost meet most of your needs, the maximum speed is 20000RPM, please avoid running higher than or equal to the maximum speed.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: nuodun
Dimensions: 0.50 x 1.50 x 0.50 Inches
See On Amazon #6
NuoDunco 3/8" Pneumatic Sander Air Belt Sander Set With 14Pcs Belts,Include Grit 60/80/120,1/4" Air Inlet Mini Air Belt Grinder Air Tool For Aluminium, Iron, Steel Metal Polishing
Asin: B0CN6L9PVQ | Ean: 0730140393396 | UPC: 730140393396
šćFunctionć: 360-Degree Adjustable Head, Simple And Efficient To Adjust The Tilt Angle To Fit The Work Needs, Suitable For Gripping The Handle, Smaller Use Of Vibration Can Be Used For A Long Time Without Tiring Hands..
šćNoteć: This Is A Pneumatic Tool, Which Means You Need To Maintain The Tool, Make Sure To Add Pneumatic Tool Oil Before And After Use, And Place It In A Dust-Free Environment After Not In Use, If You Encounter Any Problems, You Are Welcome To Let Me Know Via Email And I Will Get Back To You Within 24 Hours..
šćPerformanceć: Rugged Housing And High Quality Internal Bearings Bring High Efficiency, High Stability And Low Vibration Performance, With Optimal Performance At 90 Psi And Between 3~5 Cfm To Ensure Long-Term Stable Operation..
šćApplicationsć: Pneumatic Belt Sander Is Mainly Used For Sanding, Cutting, Deburring And Polishing Metal Products, Steel, Copper And Aluminum, Plastics, Synthetic Materials, Glass, Wood And Stone. It Is Very Effective For Narrow Space And Concave Corner Work..
Features
- Package Included : 1Pc Air Belt Sander 16500 RPM max speed ,Sander Inlet thread :1/4 inch ,Weight: 1.9LB. 14Pcs 3/8" x 13" Zirconium Oxide Sander Belts 60/80/120 Grit (Green).
- Applications : Pneumatic belt sander is mainly used for sanding, cutting, deburring and polishing metal products, steel, copper and aluminum, plastics, synthetic materials, glass, wood and stone. It is very effective for narrow space and concave corner work.
- Function : 360-degree adjustable head, simple and efficient to adjust the tilt angle to fit the work needs, suitable for gripping the handle, smaller use of vibration can be used for a long time without tiring hands.
- Performance : Rugged housing and high quality internal bearings bring high efficiency, high stability and low vibration performance, with optimal performance at 90 Psi and between 3~5 CFM to ensure long-term stable operation.
- Note : This is a pneumatic tool, which means you need to maintain the tool, make sure to add pneumatic tool oil before and after use, and place it in a dust-free environment after not in use, if you encounter any problems, you are welcome to let me know via email and I will get back to you within 24 hours.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NuoDunco
See On Amazon #7
3/8" x 13" Sanding Belts for Air Belt Sander, 20 Pack 80 Grit Zirconia Sanding Belts for Belt Sander 3/8 inch x 13 inch(10 x 330mm)
Asin: B0CD82WC3M
ćSmooth & Firm JointćOur Ruihongv 3/8" X 13" Sanding Belts Fully Adopts Bonded Resin To Make The Adhesion Between Sand And Belt Higher, Heat Dissipation Is Better When Sanding, Offering Fast And Durable Sanding, And The Grain Is Not Easy To Fall..
ćEconomical Sanding BeltsćFeatures Great Longevity, Abrasion Resistance, Anti-Static, And Resists Moisture And Heat. Suitable For Most Brands Of 3/8" X 13" Belt Sander. Make Polishing Smoother, More Efficient, And Lasting..
ćWidely Applicationć3/8 X 13 Inch Sanding Belts Are Ideal For Sanding Metal, Wood, Automobiles, Furniture, Stainless Steel. Great For Smoothing Surfaces And Edges, The Belt Can Hold Up Really Well To Metal When Deburring..
ćPremium Zirconia GrainćThe 3/8" X 13" Sanding Belt Is Made Of Green Zirconia Particles, Which Is Waterproof, High Hardness, And Heat-Resistant. It Is More Sharp And Wear-Resistant Than Red Aluminum Oxide Sanding Belt And Black Silicon Carbide Sanding Belt, And Zirconia Sanding Belt Can Grind Metals With Higher Hardness..
Features
- 80 GRIT SANDING BELTS 20 pack 3/8 x 13 Inch sanding belts 80 grit which is Ideal for medium-level sanding tasks, it effectively removes surface flaws, levels wood and metal, and prepares surfaces for finer sanding.
- PREMIUM ZIRCONIA GRAIN The 3/8 x 13 sanding belt is made of green zirconia particles, which is waterproof, high hardness, and heat-resistant. It is more sharp and wear-resistant than red aluminum oxide sanding belt and black silicon carbide sanding belt, and zirconia sanding belt can grind metals with higher hardness.
- SMOOTH & FIRM JOINT Our RUIHONGV 3/8 x 13 sanding belts fully adopts bonded resin to make the adhesion between sand and belt higher, heat dissipation is better when sanding, offering fast and durable sanding, and the grain is not easy to fall.
- WIDELY APPLICATION 3/8 x 13 Inch Sanding Belts are ideal for sanding metal, wood, automobiles, furniture, stainless steel. Great for smoothing surfaces and edges, the belt can hold up really well to metal when deburring.
- ECONOMICAL SANDING BELTS Features great longevity, abrasion resistance, anti-static, and resists moisture and heat. Suitable for most brands of 3/8 x 13 Belt Sander. Make polishing smoother, more efficient, and lasting.
- See more on Amazon...
Brand: RUIHONGV | Manufacturer: RUIHONGV
See On Amazon #8
NuoDunco 1-1/2" Cartridge Rolls with 1/8 Stem Mandrel for Rotary Dremel Tools 80 120 240 Grit Sandpaper Roll for Metal & Woodworking Polishing Sanding Kit
Asin: B0C7MRCY1K | Model: 31850 | PartNumber: 31850 | Ean: 0720707245404 | UPC: 720707245404
ćQuick Change Designć: When The Shaft Mandrel Is Mounted On A Dremel Rotary Tool Or Micro Grinder, Simply Pull Out The Old Sanding Roll And Insert The New One Each Time, Just Make Sure The Shaft Is Inserted Into The Correct Center Of The Roll, And It Will Automatically Screw In The Rotation. Simple Steps That Don't Take Seconds To Get Back To Work..
ćMore Items To Exploreć: Nuodunco Is A Brand Supplier Offering Rare But High Level Abrasive Products, If You Are Interested In Polishing And Grinding Welcome To Enter My Store To See More Rare Related Products, If You Have Any Questions Welcome To Let Me Know By Email, I Will Reply You In 24 Hours..
ćWhy Choose Usć: This Sanding Kit Started Out As An Industrial Grade Custom Product, Often Used For Automotive Engine Porting, And Has Since Been Found To Be Tremendously Useful For Blending Marks, Removing Hard Burrs, Weld Prep, Wood Carving, Detail Polishing, And More. Time Will Tell More About The Value Of This Little Guy..
ćIndustrial Grade Materialsć: Made From High Quality Zirconium Oxide Coated Abrasive Cloth Provides A Solid And Durable Grinding Power Combined With High Efficiency And Long Life To Give You That Premium Performance That You Need And Expect From Your Tools..
Features
- Package Include : 48 x Sanding Cartridge Rolls , 2 x 1/8" Shank Mandrels, Cone Shaped Sanding Rolls: 80/120/240 Grit, Cylinder Shaped Sanding Rolls: 80/120/240 Grit; Recommended speed is 9,000~12,000.
- Industrial Grade Materials : Made from High quality zirconium oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools.
- Quick Change Design : When the shaft mandrel is mounted on a Dremel Rotary tool or Micro Grinder, simply pull out the old sanding roll and insert the new one each time, just make sure the shaft is inserted into the correct center of the roll, and it will automatically screw in the rotation. Simple steps that don't take seconds to get back to work.
- Why Choose Us : This sanding kit started out as an industrial grade custom product, often used for automotive engine porting, and has since been found to be tremendously useful for blending marks, removing hard burrs, weld prep, wood carving, detail polishing, and more. Time will tell more about the value of this little guy.
- More Items to Explore : NuoDunco is a brand supplier offering rare but high level abrasive products, if you are interested in polishing and grinding welcome to enter my store to see more rare related products, if you have any questions welcome to let me know by email, I will reply you in 24 hours.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NuoDunco
See On Amazon #9
NuoDunco 4 Inch Premium Wool Felt Polishing Disc, for 5/8 Angle Grinder, Very-Fine Buffing Wheel for Metal Wood Auto Body Work, 5 Pack
Asin: B0C2PP8JGY | Ean: 0720707245138 | UPC: 720707245138
Long Service Life, Strong And Stable Black Cover Disc For Improved Rotational Stability And No Breakage..
Widely Used In Stainless Steel Carbon Steel, Woodworking, Automotive, Yacht Polishing Work..
The Elastic Wool Fibres, Which Are Heat And Abrasion Resistant, Are Suitable For Use With Polishing Pastes To Finish Your Polishing Job Perfectly..
4" Size 0.39" Thick, 0.62" Centre Hole Diameter Fits 5/8" (100Mm) Angle Grinder..
Features
- Made from soft, thick sheep wool from Australia, environmentally friendly and nature-friendly, it removes scratches for a fine polish.
- 4 size 0.39 thick, 0.62 centre hole diameter fits 5/8 (100mm) angle grinder.
- Long service life, strong and stable black cover disc for improved rotational stability and no breakage.
- The elastic wool fibres, which are heat and abrasion resistant, are suitable for use with polishing pastes to finish your polishing job perfectly.
- Widely used in stainless steel carbon steel, woodworking, automotive, yacht polishing work.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NuoDunco
Dimensions: 0.10 x 4.00 x 4.00 Inches
See On Amazon #10
NuoDunco 10Pcs 180 Grit Scour Flap Disc 4 1/2 Inch Angle Grinder Attachment Coarse Sanding Disc Paint Rust Remover Wire Brush Metal Polishing Wheel
Asin: B08Z3J2157 | Model: ndfpj0000298-2_2srp | PartNumber: ndfpj0000298-2_2srp | Ean: 8746030632263
šćHow To Useć: Recommended For Flat Use, Not Designed For Tilted Use Or Use Of Edges, Maximum Speed 12,500 Rpm, And 600 ~ 5,000 Rpm Recommended For General Use..
šćCoarse Gritć: 180Grit Has Better Removal Performance, The Coarser Nylon Fibers Perform Very Well Against Weld And Rust, Also Great For Removing Old Paint, Suitable For Use With A Fine Grit Or Wool Wheel..
šćNoteć: A Tip For Use, This Flap Disc Can Be Used With Polishing Compounds To Help Achieve A Very-Nice Polished Result..
šćLong Service Lifeć: The Upgraded Abrasive Surface Adds More Material To Make The Surface Wider And Thicker, Ensuring A Better And More Even And Fluffy Sanding Is Provided..
šćPerformanceć: This Is A Scotch-Brite Flap Disc Designed To Be Used On An Angle Grinder, It's Great For Sanding Down Paint Coats Or Scraping Something Off Without Completely Scratching What You're Working On!.
Features
- Size : Outer Diameter: 4-1/2inch (115mm), Aperture: 7/8inch (22mm), Thickness: 0.7inch (17mm), Coating Width: 1inch (25mm), Grit: 180#.
- Performance : This is a scotch-brite flap disc designed to be used on an angle grinder, it's great for sanding down paint coats or scraping something off without completely scratching what you're working on!
- How to Use : Recommended for flat use, not designed for tilted use or use of edges, maximum speed 12,500 RPM, and 600 ~ 5,000 RPM recommended for general use.
- Long Service Life : The upgraded abrasive surface adds more material to make the surface wider and thicker, ensuring a better and more even and fluffy sanding is provided.
- Coarse Grit : 180Grit has better removal performance, the coarser nylon fibers perform very well against weld and rust, also great for removing old paint, Suitable for use with a fine grit or wool wheel.
- Note : A tip for use, this flap disc can be used with polishing compounds to help achieve a very-nice polished result.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: nuodun
Dimensions: 0.87 x 4.50 x 4.50 inches
See On Amazon #11
NuoDunco 3/4" x 20-1/2" Pneumatic Sander Air Belt Sander Set With 14Pcs Belts,40/60/80/120Grit,1/4" Air Inlet Mini Air Belt Grinder Air Tool For Aluminium, Iron, Steel Metal
Asin: B0C9M4CPWQ | Ean: 0720707245367 | UPC: 720707245367
šćFunctionć: 360-Degree Adjustable Head For Easy And Efficient Adjustment Of The Tilt Angle To Meet Your Work Needs, Grip-Friendly Handle, And Less Vibration From Use For Long Periods Of Time Without Tiring Your Hands..
šćNoteć: This Is A Pneumatic Tool, Which Means You Need To Maintain The Tool, Make Sure To Add Pneumatic Tool Oil Before And After Use, And Place It In A Dust-Free Environment After Not In Use, F You Encounter Any Problems, You Are Welcome To Let Me Know Via Email And I Will Get Back To You Within 24 Hours..
šćTipsć: This Is A Few Tips On How To Use The Belt Sander, If You Need To Sand Flat Use The Flat Area Underneath The Belt Sander, This Makes It Easy To Get A Flat Surface, And The Head Roller Part Of The Belt Sander Is Effective At Dealing With Details And Uneven Surfaces..
šćPerformanceć: Rugged Housing And High Quality Internal Bearings Bring High Efficiency, High Stability And Low Vibration Performance, With Optimal Performance At 90 Psi And Between 3~5 Cfm To Ensure Long-Term Stable Operation..
šćApplicationsć: Pneumatic Belt Sander Is Mainly Used For Sanding, Cutting, Deburring And Polishing Metal Products, Steel, Copper And Aluminum, Plastics, Synthetic Materials, Glass, Wood And Stone. It Is Very Effective For Narrow Space And Concave Corner Work..
Features
- Package Included : 1Pc Air Belt Sander 18000 RPM max speed ,Sander Inlet thread :1/4 inch ,Weight: 2.7LB. 14Pcs 3/4" x 20-1/2" Aluminum Oxide Sander Belts 40/60/80/120 Grit.
- Applications : Pneumatic belt sander is mainly used for sanding, cutting, deburring and polishing metal products, steel, copper and aluminum, plastics, synthetic materials, glass, wood and stone. It is very effective for narrow space and concave corner work.
- Function : 360-degree adjustable head for easy and efficient adjustment of the tilt angle to meet your work needs, grip-friendly handle, and less vibration from use for long periods of time without tiring your hands.
- Performance : Rugged housing and high quality internal bearings bring high efficiency, high stability and low vibration performance, with optimal performance at 90 Psi and between 3~5 CFM to ensure long-term stable operation.
- Note : This is a pneumatic tool, which means you need to maintain the tool, make sure to add pneumatic tool oil before and after use, and place it in a dust-free environment after not in use, f you encounter any problems, you are welcome to let me know via email and I will get back to you within 24 hours.
- Tips : This is a few tips on how to use the belt sander, if you need to sand flat use the flat area underneath the belt sander, this makes it easy to get a flat surface, and the head roller part of the belt sander is effective at dealing with details and uneven surfaces.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NuoDunco
See On Amazon #12
3/8 x 13 Inch Zirconia Sanding Belts, 3/8" x 13" Air Belt Sander Belts Replacement, 5 Each of 40/60/80/120 Assorted Grits Abrasive File Belts for Air Belt Sander
Asin: B0C9DDV3XF
ćSmooth & Firm JointćOur Ruihongv 3/8X13 Inch Zirconia Sanding Belts Fully Adopts Bonded Resin To Make The Adhesion Between Sand And Belt Higher, Heat Dissipation Is Better When Sanding, Offering Fast And Durable Sanding, And The Grain Is Not Easy To Fall..
ćWidely Applicationć3/8 Inch X 13 Inch Knife Sharpening Sanding Belt Are Ideal For Sanding Metal, Wood, Automobiles, Furniture, Stainless Steel. Great For Smoothing Surfaces And Edges, The Belt Can Hold Up Really Well To Metal When Deburring..
ćEconomical Sanding BeltsćSanding Belts Replacement 3/8" X 13" Features Great Longevity, Abrasion Resistance, Anti-Static, And Resists Moisture And Heat. Suitable For Most Brands Of 3/8" X 13"Air Belt Sander..
ćPremium Zirconia GrainćThe 3/8" X 13" Sanding Belt Is Made Of Green Zirconia Particles, Which Is Waterproof, High Hardness, And Heat-Resistant. It Is More Sharp And Wear-Resistant Than Red Aluminum Oxide Sanding Belt And Black Silicon Carbide Sanding Belt, And Zirconia Sanding Belt Can Grind Metals With Higher Hardness..
Features
- SANDING BELTS KIT 20 pack 3/8 x 13 Inch sanding belts with 4 different grit sizes of abrasive belts, 40 grit, 60 grit, 80 grit and 120 grit to meet your different needs and help you save more time.
- PREMIUM ZIRCONIA GRAIN The 3/8 x 13 sanding belt is made of green zirconia particles, which is waterproof, high hardness, and heat-resistant. It is more sharp and wear-resistant than red aluminum oxide sanding belt and black silicon carbide sanding belt, and zirconia sanding belt can grind metals with higher hardness.
- SMOOTH & FIRM JOINT Our RUIHONGV 3/8x13 inch Zirconia Sanding Belts fully adopts bonded resin to make the adhesion between sand and belt higher, heat dissipation is better when sanding, offering fast and durable sanding, and the grain is not easy to fall.
- ECONOMICAL SANDING BELTS Sanding Belts Replacement 3/8 x 13 features great longevity, abrasion resistance, anti-static, and resists moisture and heat. Suitable for most brands of 3/8 x 13Air Belt Sander.
- WIDELY APPLICATION 3/8 Inch X 13 Inch knife sharpening Sanding Belt are ideal for sanding metal, wood, automobiles, furniture, stainless steel. Great for smoothing surfaces and edges, the belt can hold up really well to metal when deburring.
- See more on Amazon...
Brand: RUIHONGV | Manufacturer: RUIHONGV
See On Amazon #13
NuoDunco Paint Stripper Wheel 4 1/2 Inch Rust Remover for Angle Grinder 40# Coated Nylon Fiber Flap Disc Stripping Pad Paint Strip Disc, 2 Pack
Asin: B0CLCGHQPP | Ean: 0730140393280 | UPC: 730140393280
šćMulti Applicationć: 40 Grit Are Highly Aggressive And Our Strip Discs Are Widely Used For Metal Rust Paint Removal, Welding Work Cleaning, Wood Furniture Refinishing, Removing Old Thick Paint, Removing Corrosive Chemical Stains, Grinding Concrete..
šćGrinder Attachmentć: 4-1/2-Inch Diameter With A 7/8-Inch Arbor Size Compatible With An Angle Grinder With A Maximum 13,000 Rpm Grinding Speed. Recommended Speed For General Use Is Less Than 6,000 Rpm..
šćLonger Lifeć: Incredible Longevity, Usually One Piece Is Enough For Many Jobs Until Completely Worn Down To The Full Abrasive Portion, Better Moldability With Use, Naturally Grinds To The Right Angle And Finishes Your Job With A Variety Of Cut Angles..
šćOpen Structureć: As You Can See The Structure Of The Wheel Is Like A Coral With Many Irregular Voids, The Purpose Is To Disperse The Pressure And Heat Buildup, These Voids Can Also Hold The Peeled Off Paint To Reduce The Droplets Sparks And Noise..
Features
- Stripping Specialist : NuoDunco Stripper Discs are made of open-structured nylon fibers with an additional coating of diamond particles, which have the advantage of not falling apart or breaking up with little sound and sparks, and can remove rust, oxides, and corrosion without damaging the surface of the metal.
- Open Structure : As you can see the structure of the wheel is like a coral with many irregular voids, the purpose is to disperse the pressure and heat buildup, these voids can also hold the peeled off paint to reduce the droplets sparks and noise.
- Multi Application : 40 Grit are highly aggressive and our Strip Discs are widely used for metal rust paint removal, welding work cleaning, wood furniture refinishing, removing old thick paint, removing corrosive chemical stains, grinding concrete.
- Longer Life : Incredible longevity, usually one piece is enough for many jobs until completely worn down to the full abrasive portion, better moldability with use, naturally grinds to the right angle and finishes your job with a variety of cut angles.
- Grinder Attachment : 4-1/2-inch diameter with a 7/8-inch arbor size compatible with an angle grinder with a maximum 13,000 RPM grinding speed. Recommended speed for general use is less than 6,000 RPM.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NuoDunco
Dimensions: 0.10 x 4.50 x 4.50 inches
See On Amazon #14
NuoDunco 3 Inch Flap Disc 60Grit 10Pack, W3/8" Arbor Hole Grinding Disc for Stock & Rust Removal Grinding Sanding Finishing Deburring
Asin: B0CGHQD7LG | Ean: 0730140393167 | UPC: 730140393167
Brand: NuoDunco | Manufacturer: NuoDunco
Dimensions: 0.04 x 3.00 x 3.00 Inches
See On Amazon #15
JIUNENG 3 Inch Cut Off Wheels and 1 Mandrel Kit,10Pcs 3 x1/16 x3/8 Thin Cutting Discs with 1 Mounting Mandrel for Die Grinder Rotary Tool
Asin: B0BHVH69DQ | Model: 20221205 | PartNumber: 20221205
ćFit For ToolsćThe Cut-Off Wheel Mandrel With 1/4ā Shaft,Perfectly Compatible With All 3 Inch(75Mm) Angle Grinders With 3/8 Inch(9.5Mm) Arbor. Fit For Most Die Grinder, Air Tools And Drill Rotary Tools. Pay Attention To Connector Size, Easy To Mount And Demount..
ćPackageć10Pcs 3Inch Cut-Off Wheels + 1Pc Mandrel Kit.
ćMulti-ApplicationsćThe Die Grinder Cut-Off Wheel Has Strong Aggressiveness For Super-Fast Burr Free Cutting On Metal, Iron, Steel, Stainless Steel, Fiberglass, Aluminum And Plastic..
ćDurability And Safety ćThe 3 Inch Cutting Blade Are Made Of Long-Lasting And Valuable Single Crystal Corundum & Calcined Corundum. The Double Reinforced Fiberglass Mesh And Its Balanced Material Structure Make These Cutting Wheels Safer And Not Be Easily Broken..
Features
- Material The 3" cutting wheel is made of Proprietary aluminum oxide grain combination ensures durable long wheel life and fast bur-free cutting; The mandrel is made of A3 carbon steel with black plating, durable.
- Durability and Safety The 3 inch cutting blade are made of long-lasting and valuable single crystal corundum & calcined corundum. The double reinforced fiberglass mesh and its balanced material structure make these cutting wheels safer and not be easily broken.
- Fit for Tools The Cut-off wheel mandrel with 1/4 Shaft,Perfectly compatible with all 3 inch(75mm) angle grinders with 3/8 inch(9.5mm) arbor. Fit for most die grinder, air tools and drill rotary tools. Pay attention to connector size, easy to mount and demount.
- Multi-Applications The Die grinder cut-off wheel has strong aggressiveness for super-fast burr free cutting on metal, iron, steel, stainless steel, fiberglass, aluminum and plastic.
- Package 10pcs 3Inch Cut-Off Wheels + 1pc Mandrel Kit
- See more on Amazon...
Brand: JIUNENG | Manufacturer: JIUNENG
Dimensions: 0.04 x 3.00 x 3.00 inches
See On Amazon #16
Rustark 8 Pcs 4"Nylon Fiber Flap Disc Polishing Grinding Wheel Set, Scouring pad Buffing Wheel for Angle Grinder, Abrasive Sanding Wheels, Nylon Polishing Disc Kit (120/180/240/320 Grit)
Asin: B08DHDQXJV | Model: R-BJW | PartNumber: R-BJW
šćPremium Polishing Wheels ćMade Of Nylon Fiber With Good Elasticity And Heat Dissipation Durable And Wear-Resistant, Resistant To Water And Oil,High Grinding Efficiency, Hard-Wearing, Long Service Time. Good Mirror Light Effect, Not Easy To Scratch Metal Surface..
šćWidely Applicationć Plays An Excellent Effect On All Kind Of Material: Plastic, Stainless Steel, Wood, Alloy, Aluminum, Leather And Other Metal.Widely Applied In Polishing Of Metallurgy, Machinery, Light Industry, Wood Products,Furniture,Melamine,Building Materials, Cleaning Furniture,Polishing Jewelry, Automobiles, Leather, Textile And Other Industries..
šćWork GreatćScouring Pad Buffing Wheel With High Flexibility,Shape Of The Work Piece Without Damage, Avoiding Excessive Cutting. Especially Suitable For Irregular Curved Surface And Grinding Out The Fine Sand Grain.Ideal For Effective Dry Sanding, Grinding, Polishing, Contour Work, Removing Rust And Deburring, Ect..
šćDimension Of Nylon Fiber Flap WheelćDiameter X Aperture X Thickness: 4Inch X 0.63 Inch X 0.6Inch;Perfectly Fit For Angle Grinder..
Features
- Mixed Grit Assortment Set The buffing polishing wheel kit contains 4 different grit scouring pad buffing wheel for angle grinder, including 120 grit green abrasive flap wheel,180 grit green nylon polishing disc, 240 grit red Abrasive Disc Polishing Grinding Buffing Wheel, 320 grit red Nylon Fiber Flap Polishing Grinding Wheel, 2 pcs each type, totally 8 pcs, meeting your various needs.
- Dimension of Nylon Fiber Flap Wheel Diameter x Aperture x Thickness: 4inch x 0.63 inch x 0.6inch;perfectly fit for Angle Grinder.
- Premium Polishing Wheels Made of nylon fiber with good elasticity and heat dissipation durable and wear-resistant, resistant to water and oil,high grinding efficiency, hard-wearing, long service time. Good mirror light effect, not easy to scratch metal surface.
- Work Great Scouring pad buffing wheel With high flexibility,shape of the work piece without damage, avoiding excessive cutting. Especially suitable for irregular curved surface and grinding out the fine sand grain.Ideal for effective dry sanding, grinding, polishing, contour work, removing rust and deburring, ect.
- Widely Application Plays an excellent effect on all kind of material: plastic, stainless steel, wood, alloy, aluminum, leather and other metal.Widely applied in polishing of metallurgy, machinery, light industry, wood products,furniture,melamine,building materials, Cleaning Furniture,Polishing Jewelry, automobiles, leather, textile and other industries.
- See more on Amazon...
Brand: Rustark | Manufacturer: Rustark
See On Amazon #17
NuoDunco Rust Remover Wheel Remove Paint and Oxidation Poly Strip Wheel Disc Abrasive Angle Grinding Wheel (6Pack -4-1/2" x7/8" 40#)
Asin: B0CLCHMP9W | Ean: 0730140393273 | UPC: 730140393273
šćMulti Applicationć: 40 Grit Are Highly Aggressive And Our Strip Discs Are Widely Used For Metal Rust Paint Removal, Welding Work Cleaning, Wood Furniture Refinishing, Removing Old Thick Paint, Removing Corrosive Chemical Stains, Polishing Fiberglass Molds..
šćGrinder Attachmentć: 4-1/2-Inch Diameter With A 7/8-Inch Arbor Size Compatible With An Angle Grinder With A Maximum 13,000 Rpm Grinding Speed. Recommended Speed For General Use Is Less Than 6,000 Rpm..
šćLonger Lifeć: Incredible Longevity, Usually One Piece Is Enough For Many Jobs Until Completely Worn Down To The Full Abrasive Portion, Better Moldability With Use, Naturally Grinds To The Right Angle And Finishes Your Job With A Variety Of Cut Angles..
šćOpen Structureć: As You Can See The Structure Of The Wheel Is Like A Coral With Many Irregular Voids, The Purpose Is To Disperse The Pressure And Heat Buildup, These Voids Can Also Hold The Peeled Off Paint To Reduce The Droplets Sparks And Noise..
Features
- Stripping Specialist : NuoDunco Stripper Discs are made of open-structured nylon fibers with an additional coating of diamond particles, which have the advantage of not falling apart or breaking up with little sound and sparks, and can remove rust, oxides, and corrosion.
- Open Structure : As you can see the structure of the wheel is like a coral with many irregular voids, the purpose is to disperse the pressure and heat buildup, these voids can also hold the peeled off paint to reduce the droplets sparks and noise.
- Multi Application : 40 Grit are highly aggressive and our Strip Discs are widely used for metal rust paint removal, welding work cleaning, wood furniture refinishing, removing old thick paint, removing corrosive chemical stains, polishing fiberglass molds.
- Longer Life : Incredible longevity, usually one piece is enough for many jobs until completely worn down to the full abrasive portion, better moldability with use, naturally grinds to the right angle and finishes your job with a variety of cut angles.
- Grinder Attachment : 4-1/2-inch diameter with a 7/8-inch arbor size compatible with an angle grinder with a maximum 13,000 RPM grinding speed. Recommended speed for general use is less than 6,000 RPM.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NuoDunco
Dimensions: 0.10 x 4.50 x 4.50 Inches
See On Amazon #18
Die Grinder Cut Off Wheel Mandrel - 1/4" Die Grinder Mandrel with 3/8" Arbor Hole for High-Speed Cutting Durable Arbor Adapter Cut Off Wheel Mandrel for Cleaning and Polishing - Drixet
Asin: B07CTVRXH5 | Model: 3072 | PartNumber: 3072 | Ean: 0811902030725 | UPC: 811902030725
āQuality: Cut Off Mandrel Quality Made Mandrel That Is Machined Made Of Steel And Finished With A Corrosion Resistant Protection. Mandrel Is Made To Hold Wheels With A 1/4" Arbor Hole, Shank Is 1/4" And Wheel Width Capacity Is From 3/8" To 1/2"..
āUses: Die Grinder Mandrel Great For Grinding, Debarring, Surface Prepping, Cutting Sheet Metal, Fiberglass And More, Outperform Standard Grinding Wheels In All Ways, Maintain Diameter, Last Longer And Cut Faster.
āDesign: Mandrel-Adapter Can Be Used With A Rotary Power Tool, Wheels Are Secured In Place With A Slotted Screw, Changing Wheels Is Quick And Easy. The Head Style Cut Off Mandrel Is A Bell Head Mandrel, Design Permits Better Access To Work Areas Which May Be Difficult To Reach..
āSpecification: Grinder Mandrel Screw Lock 3/8" To 1/2" Capacity Chuck Wheel Mandrel Disc Holder 1/4" Shank, A Shank With A Threaded Head Used Primarily To Hold And Use Cut-Off Wheels, Mandrel For Drill Turns Any Die Grinder Or Drill Into A Utility Cut-Off Tool..
Features
- The die grinder accessories Essential accessory set for Dermal and other power rotary tools, hardened steel with nickel finish, grinder mandrel Provide sturdy mounting base for sanding, buffing or cut-off wheels & discs, saw blades
- Specification: grinder mandrel Screw lock 3/8 TO 1/2 capacity chuck wheel mandrel disc holder 1/4 SHANK, A shank with a threaded head used primarily to hold and use cut-off wheels, mandrel for drill Turns Any Die Grinder or Drill into a Utility Cut-Off Tool.
- Quality: cut off mandrel Quality made Mandrel that is machined made of steel and finished with a corrosion resistant protection. Mandrel is made to hold Wheels with a 1/4 arbor hole, Shank is 1/4 and Wheel Width Capacity is from 3/8 TO 1/2.
- Design: Mandrel-Adapter can be used with a rotary power tool, wheels are secured in place with a slotted screw, changing wheels is quick and easy. The head style cut off mandrel is a Bell Head mandrel, Design permits better access to work areas which may be difficult to reach.
- Uses: die grinder mandrel great for grinding, debarring, surface prepping, cutting sheet metal, fiberglass and more, Outperform standard grinding wheels in all ways, maintain diameter, last longer and cut faster
- See more on Amazon...
Brand: Drixet | Manufacturer: Drixet
See On Amazon #19
NuoDunco 4 x 5/8 Inch Strip Discs Premium Stripping Wheel for Grinding Remove Paint, Rust, Welds, Oxidation
Asin: B0CLCFDPHH | Ean: 0730140393303 | UPC: 730140393303
šćHow To Useć: Removing Rust And Paint Is Recommended To Be Below 6,000 Rpm, High Speed Can Eat Away Hard Metal Protrusions And Burrs, The Maximum Speed Is 13,000 Rpm..
šćNuoduncoć: Industrial Grade Abrasives Supplier, If You Have Any Questions Please Feel Free To Let Me Know Via Email And I Will Get Back To You Within 24 Hours..
šćLong Service Lifeć: The Upgraded Abrasive Surface Adds A High-Quality 40Grit Diamond Coating For A Non-Clogging And More Abrasion-Resistant Surface To Ensure Longer Service Life And Better Sanding Results With High Efficiency..
šćPerformanceć: This Is A Paint Removal Angle Grinder Attachment, Perfect For Sanding Down Paint Coatings Or Scraping Something Off Without Completely Scratching What You're Working On!.
Features
- Size : Outer Diameter: 4inch (100mm), Aperture: 5/8inch (16mm), Thickness: 0.6inch (15mm), Coating Width: 1inch (25mm).
- Performance : This is a Paint Removal Angle Grinder Attachment, perfect for sanding down paint coatings or scraping something off without completely scratching what you're working on!
- How to Use : Removing rust and paint is recommended to be below 6,000 RPM, high speed can eat away hard metal protrusions and burrs, the maximum speed is 13,000 RPM.
- Long Service Life : The upgraded abrasive surface adds a high-quality 40Grit diamond coating for a non-clogging and more abrasion-resistant surface to ensure longer service life and better sanding results with high efficiency.
- NuoDunco : Industrial Grade Abrasives Supplier, If you have any questions please feel free to let me know via email and I will get back to you within 24 hours.
- See more on Amazon...
Brand: NuoDunco | Manufacturer: NuoDunco
Dimensions: 0.10 x 4.00 x 4.00 inches
See On Amazon ļ»æ
Looking For Something Else?
Search