BIGTREETECH Smart Filament Runout Sensor V2.0 BTT SFS Filament Detector to Detect Filament Break/Run Out/Jam/Tying for 1.75mm Filament Use with SKR Mini E3 V3.0, SKR 3, Manta E3EZ, Octopus Pro
Asin: B0C7PZDBNC
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🌞【Bilateral Feeding】Bigtreetech Smart Filament Sensor V2.0 Allows Bi-Directional Feeding, Which Removes You From Hard Discrimination Of Filament Inlet And Outlet. Such Upgrading Enables More Flexible Installation And Can Maximize Space Utilization Of Your 3D Printer! Sfs V2.0 Weighs Only 36G, Greatly Reducing Inertia Added To The Direct-Drive Extruder For Higher Printing Speed And Accuracy..
🌞【Wide Compatibility】Bigtreetech Filament Jam Sensor Can Be Mounted Both On Bowden Extruder And Direct Drive Extruders. It Supports Any Motherboard With Available I/O Ports(Endstop, Filament Detection, Bl Touch, Induction Sensor, Etc), Like Skr Mini E3 V3.0 / Skr3 / Skr 3 Ez / Skrat / Manta E3ez / Octopus Pro. And Sfs V2.0 Is Compatible With Klipper, Marlin And Reprap Firmwares..
🌞【Warm Customer Service】Please Feel Free To Contact Us Directly Through Amazon If You Have Any Problem When Using Our Sfs V2.0, Bigtreetech Customer Service Team Will Try Our Best To Solve It..
🌞【Easy To Install】Our Filament Run Out Sensor Is Designed With 3 Mounting Holes On The Back For Easy Installation Onto Your 3D Printer With Only A Bracket. The Bracket Stl File Can Be Downloaded In Btt Github Web: Bigtreetech/Smart-Filament-Detection-Module/Tree/Master. The Filament Feeding Lever Serves For Easy Flexible Filament Loading. Please Feel Free To Contact Us If You Have Any Doubts..
🌞【Sensitive Photoelectric Filament Detector】Btt Filament Detection Module Adopts Photoelectric Sensor Whose Theoretical Detection Length Can Reach Up To 2.88Mm, Much Shorter Than 7Mm Of Sfs V1.0. Such Improvement Enables Sfs V2.0 Longer Service Life And Higher Precision In Filament Abnormality Detection. Note: 2.88 Mm Is The Minimum Detection Length For The Sensor To Function Properly. If ‘False Triggers’ Error Occurs, Try To Increase The Detection Length By 1Mm Until The Problem Is Resolved..
Features
- Smart Filament Sensor BIGTREETECH SFS V2.0 can not only detect filament runout, but also filament breakage, filament clogging, filament tying and even extruder malfunction. Detecting above abnormal extrusion cases, BTT SFS V2.0 will send error alerts to screen and automatically stop printing to keep you away from filament and electricity waste.
- Sensitive Photoelectric Filament Detector BTT filament detection module adopts photoelectric sensor whose theoretical detection length can reach up to 2.88mm, much shorter than 7mm of SFS V1.0. Such improvement enables SFS V2.0 longer service life and higher precision in filament abnormality detection. Note: 2.88 mm is the minimum detection length for the sensor to function properly. If false triggers error occurs, try to increase the detection length by 1mm until the problem is resolved.
- Bilateral Feeding BIGTREETECH smart filament sensor V2.0 allows bi-directional feeding, which removes you from hard discrimination of filament inlet and outlet. Such upgrading enables more flexible installation and can maximize space utilization of your 3d printer! SFS V2.0 weighs only 36g, greatly reducing inertia added to the direct-drive extruder for higher printing speed and accuracy.
- Easy to Install Our filament run out sensor is designed with 3 mounting holes on the back for easy installation onto your 3d printer with only a bracket. The bracket stl file can be downloaded in BTT github web: bigtreetech/smart-filament-detection-module/tree/master. The filament feeding lever serves for easy flexible filament loading. Please feel free to contact us if you have any doubts.
- Wide Compatibility BIGTREETECH filament jam sensor can be mounted both on bowden extruder and direct drive extruders. It supports any motherboard with available I/O ports(Endstop, filament detection, BL touch, induction sensor, etc), like SKR MINI E3 V3.0 / SKR3 / SKR 3 EZ / SKrat / Manta E3EZ / Octopus Pro. And SFS V2.0 is compatible with Klipper, Marlin and RepRap firmwares.
- Warm Customer Service Please feel free to contact us directly through Amazon if you have any problem when using our SFS V2.0, BIGTREETECH customer service team will try our best to solve it.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
Weight: 0.08 pounds
See On Amazon Similar To BIGTREETECH Smart Filament Runout Sensor
#1
Creativity 3D Printer Filament Detection Sensor Module Filament Run-Out Pause Detecting Monitor for 3D Printer Lerdge Board 1.75mm Filament (Black)
Asin: B087325BPG | Model: Filament-Detection | PartNumber: Filament-Detection | Ean: 5698548257205
★【Filament Detection Module】Newly Designed Smart Module, The Main Board Executes The Pause Command Operation When The Filament Is Run Out..
★【After-Sales Guarantee 】Each Defective Item Can Be Replacement For Free Or Refund. If Any Question, Please Feel Free To Contact Or Qa Us, We Will Try Our Best To Service You..
★【Extended Product Life】A Wear-Resistant Copper Sleeve Is Added To The Feed Port And The Discharge Port At The Same Time Can Effectively Prolong The Service Life Of The Product..
★【Main Function】For Checking The Filament Is Whether Run Out Or Not, It Automatically Stops The 3D Printer When The Filament Runs Out..
Features
- 3D Printer Accessories Very practical filament detection sensor module, ideal accessories for 3D printer, making your printing work smooth and relieved.
- Main Function For checking the filament is whether run out or not, it automatically stops the 3D Printer when the filament runs out.
- Filament Detection Module Newly designed smart module, The main board executes the pause command operation when the filament is run out.
- Extended Product Life A wear-resistant copper sleeve is added to the feed port and the discharge port at the same time can effectively prolong the service life of the product.
- After-sales Guarantee Each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
- See more on Amazon...
Brand: Creativity | Manufacturer: Creativity
See On Amazon #2
Official Creality Ender 3 V2 Filament Runout Sensor, Smart Filament Break Detection Detector for Ender 3, Ender 3 Pro, Ender3 Max Ender 5 Plus with 32 Bit V4.2.2/V4.2.7 Motherboard
Asin: B09NKWSZ31 | Model: Creality Filament Sensor | PartNumber: Creality Filament Sensor
【Precise Detection】 Blue Led Indicates Normal Filament Feed-In, When The Blue Led Turns Off, It Means Filament Runs Out..
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Upgraded Design】It Is Redesigned With New Inner Structure. The Outer Cover Is Frosted, Making It Stylish And Unique..
【Smooth Filament Travelling】 The Filament Sensor Has A Built-In Filament Guider, Which Is Made Of Metal Material With Smooth Surface, Reducing Friction Resistance And Ensuring Smooth Filament Feed-In..
Features
- High Compatible Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro /Ender 3 MAX/Ender 5 Plus/ CR-10S PRO/ CR-10 V2 V3 with 32 bit V4.2.2/V4.4.7. Only Ender 3 Series need to replace extruder bracket.
- Smooth filament travelling The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
- Precise Detection Blue LED indicates normal filament feed-in, when the Blue LED turns off, it means filament runs out.
- Upgraded Design It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #3
BIGTREETECH SFS V2.0 Smart Filament Sensor,Filament Runout Sensor Support Klipper/Marlin/RRF 1.75mm SKR MINI E3/Octopus for Ender 3 FDM 3D Printer
Asin: B0C77J36T3 | Model: BIGTREETECH SFS V2.0 | PartNumber: BIGTREETECH SFS V2.0
✅【Upgrade Of Bi-Directional Feeding】Btt Smart Filament Sensor V2.0 Unlimited By The Installation Direction Of Filament, Eliminates Concerns Over Orientation, Enabling Quick, Easy Installation And Flexible Positioning To Maximize Space..
✅【Easy Install And User】Bigtreetech Btt Sfs V2.0 Support Direct-Drive Extruders And Bowden Extruders. Designed With 3 Mounting Holes On The Back For Easy To Installation Onto To Printer Using A Bracket. (For Ender 3/ Ender 3 V2/ Ender 3 V1/Voron 2.4, The Bracket Stl File Can Be Downloaded In Btt Github Web: Bigtreetech/Smart-Filament-Detection-Module/Tree/Master)..
【 ❤️After-Sales Service】The Manual And Installation Instructions Have Been Uploaded To Sfs V2.0 Github, If You Have Any Problems During Use, Please Contact Us As Soon As Possible. We Will Give You A Satisfactory Solution..
✅【Wide Compatible】Bigtreetech Smart Filament Runout Sensor V2.0 Support Klipper/Marlin/Rrf Firmware, Different Firmware, Different Screen Reminder Interfaces, Supports Any Motherboard With Available I/O Ports, (Endstop Filament Detection, Bltouch, Induction Sensor)Such As Skr Mini E3 V3.0/Octopus V1.1/Octopus Pro/Skr V1.4 Turbo/Skr 3/Ez/Skr Pico, Manta M4p/M5p/M8p, Manta E3 Ez, Kraken Board. (Notes: Please Consult Our Technical Support Before Using The Motherboard Without Filament Runout Port)..
✅【Real Time Status Light Indication】Btt Sfs V2.0 Smart Filament Sensor Upon Detecting Nozzle Clogging, Filament Runout, Filament Tying, Extruder Malfunctions, Filament Run Out Or Broken, Sfs V2.0 Will Provide Corresponding Lights For Different Issues And Issue Error Alarms On The Screen In A Timely Manner And Automatically Pauses Printing, Save Resources..
Features
- High Precise BIGTREETECH SFS V2.0 smart filament runout sensor adopts high precise photoelectric induction technology, more accurate detection, detection length 2.88mm. Upgrade add filament feeding lever, for easy flexible filament loading.
- Real Time Status Light indication BTT SFS V2.0 smart filament sensor upon detecting nozzle clogging, filament runout, filament tying, extruder malfunctions, filament run out or broken, SFS V2.0 will provide corresponding lights for different issues and issue error alarms on the screen in a timely manner and automatically pauses printing, save resources.
- Upgrade of Bi-Directional Feeding BTT smart filament sensor V2.0 unlimited by the installation direction of filament, eliminates concerns over orientation, enabling quick, easy installation and flexible positioning to maximize space.
- Wide Compatible BIGTREETECH smart filament runout sensor v2.0 support Klipper/Marlin/RRF firmware, different firmware, different screen reminder interfaces, supports any motherboard with available I/O ports, (Endstop filament detection, BLtouch, induction sensor)such as SKR MINI E3 V3.0/Octopus V1.1/Octopus Pro/SKR V1.4 turbo/SKR 3/EZ/SKR Pico, Manta M4P/M5P/M8P, Manta E3 EZ, Kraken board. (Notes: please consult our technical support before using the motherboard without filament runout port).
- Easy Install and User BIGTREETECH BTT SFS V2.0 support direct-drive extruders and bowden extruders. Designed with 3 mounting holes on the back for easy to installation onto to printer using a bracket. (For Ender 3/ Ender 3 V2/ Ender 3 V1/Voron 2.4, the bracket STL file can be downloaded in BTT github web: bigtreetech/smart-filament-detection-module/tree/master).
- After-sales Service The manual and installation instructions have been uploaded to SFS V2.0 Github, If you have any problems during use, please contact us as soon as possible. we will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.07 x 2.09 x 1.19 inches
See On Amazon #4
Creality Official Ender 3 V3 SE Filament Runout Sensor, Smart Filament Sensor Break Detection Module Detector for Creality Ender 3 V3 SE/Ender 3 V3 KE 3D Printers
Asin: B0CP5ZFCGN
Precise Detection - Blue Led Indicates Normal Filament Feed-In, When The Blue Led Turns Off, It Means Filament Runs Out..
After Sales Support -There Are More Than 20 Engineers For After-Sales Service And Provide 24/7 Customer Service With 1-Year Limited And Lifetime Technical Assistance. Please Contact Us Via “Ask A Question”Directly To Get The Professional Assistance..
Upgraded Design - It Is Redesigned With New Inner Structure. The Outer Cover Is Frosted, Making It Stylish And Unique..
Smooth Filament Travelling - The Filament Sensor Has A Built-In Filament Guider, Which Is Made Of Metal Material With Smooth Surface, Reducing Friction Resistance And Ensuring Smooth Filament Feed-In..
Features
- 100% Creality Original - Compatible with Creality Ender 3 V3 SE, Ender 3 V3 KE 3D Printers.
- Smooth Filament Travelling - The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
- Precise Detection - Blue LED indicates normal filament feed-in, when the Blue LED turns off, it means filament runs out.
- Upgraded Design - It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
- After Sales Support -There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via ask a question directly to get the professional assistance.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #5
Creality Official Ender 3 V3 SE/KE Filament Runout Sensor, 3D Printer Smart Filament Break Detection Module Detector with LED Light, Precise Detection Easy to Install
Asin: B0CP5TL417 | Ean: 6971636404897
【Independent Modularized Design】- It Is Redesigned With New Inner Structure. The Outer Cover Is Frosted, Making It Stylish And Unique..
【Package List】- Filament Detector Sensor *1, Long Metarial Rack *1, Isolated Column *2, Brackte *1, Cable *1, Screw Kit *2, And T-Nut *1. Simple Structure, Easy To Install..
【Precise Detection】- When Filament Feed-In Normally, The Blue Led Indicator Light Shows. The Blue Led Turns Off When The Filament Runs Out..
【Smooth Filament Traveling】- The Filament Sensor Has A Built-In Filament Guider, Which Is Made Of Metal Material With Smooth Surface, Reducing Friction Resistance And Ensuring Smooth Filament Feed-In..
Features
- Orginal Quality - 100% Creality Original Filament Runout Sensor Kit. Specifically designed for Ender 3 V3 SE and Ender 3 V3 KE.
- Smooth Filament Traveling - The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
- Independent Modularized Design - It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
- Precise Detection - When filament feed-in normally, the blue LED indicator light shows. The blue LED turns off when the filament runs out.
- Package List - Filament Detector Sensor *1, Long Metarial Rack *1, Isolated Column *2, Brackte *1, Cable *1, Screw Kit *2, and T-Nut *1. Simple structure, easy to install.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 5.00 x 5.00 x 5.00 inches | Weight: 0.33 pounds
See On Amazon #6
HzdaDeve Filament Detection Module Smart Runout Sensor Break Detection Filament Detect Module Monitor Sensor 1.75MM for Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max/Kobra 2 3D Printer (2 Pack)
Asin: B0CYZKY34L | Model: filament run-out pause detecting monitor | PartNumber: filament run-out pause detecting monitor
Smart Filament Detector: It Stops Automatically When The Filament Runs Out, Very Convenient For Monitoring The Consumables..
Adding Wear-Resistant Copper Sleeves To Both The Inlet And Outlet Can Effectively Extend The Service Life Of The Product..
Filament Detection Module: The Motherboard Executes A Pause Command Operation When The Filament Is Run Out..
Package Includes: 2 X Filament Detection Module For Kobra 2 Series..
Features
- This sensor detector is compatible with Anycubic Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max/Kobra 2 3D Printer with 1.75mm Filament.
- Package includes: 2 X Filament Detection Module for Kobra 2 Series.
- Smart Filament Detector: It stops automatically when the filament runs out, very convenient for monitoring the consumables.
- Filament detection module: The motherboard executes a pause command operation when the filament is run out.
- Adding wear-resistant copper sleeves to both the inlet and outlet can effectively extend the service life of the product.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve Filament Detection Module
See On Amazon #7
Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer
Asin: B099ZT1KNY | Model: Ender 3 V2 Filament Runout Sensor | PartNumber: Ender 3 V2 Filament Runout Sensor | Ean: 0791548328182 | UPC: 791548328182
Precise Detection: Blue Led Indicates Normal Filament Feed-In; Blue Led Turns Off When Filament Runs Out..
Package: 1 Filament Detector Sensor, 1 Extended Cable, 1 Installation Bracket(This Bracket Is Only Used For Ender 3 / V2 / Pro, Filament Detection Bracket Or Holes Already Set Up In The Ender 6 And Cr10s Pro).
Important: For Ender 3 V2, Ender 3 And Ender 3 Pro, You Need To Flash Your Motherboard's Firmware Before Using, About The Firmware Download Way, Please Check The Following Description Or The Instrument In The Pack. As Ender 6 And Cr10s Pro Printer's Firmware Has Been Setted With Filament Detection Function, So You Can Use Them Directly..
Independent Modularized Design: It Is Redesigned With New Inner Structure. The Outer Cover Is Frosted, Making It Stylish And Unique; Filament Breakage Detection Device Contains Micro Switch, Using The Principle Of Mechanical Proximity Switch, No Friction, Can Ensure The Smooth Feeding Of Filaments..
Features
- Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket
- Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique; Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments.
- Precise Detection: Blue LED indicates normal filament feed-in; Blue LED turns off when filament runs out.
- IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly.
- Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO)
- See more on Amazon...
Brand: HoCenWay | Manufacturer: HoCenWay
Weight: 0.11 pounds
See On Amazon #8
Creality Official CR-10 SE Filament Runout Sensor Kit, 3D Printer Smart Filament Break Detection Module Detector for 1.75mm Filament for Ender 3 S1/Ender 3 S1 Pro/Ender 3 S1 Plus/CR-M4
Asin: B0CP5VYCN6
【Precise Detection】- When Filament Feed-In Normally, The Blue Led Indicator Light Shows. The Blue Led Turns Off When The Filament Runs Out..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Wide Compatibility】- This Filament Runout Sensor Is Applicated For Ender 3 S1, Ender 3 S1 Pro, Ender 3 S1 Plus, Cr-M4, Cr-10 Se..
【Smooth Filament Travelling】- The Filament Sensor Has A Built-In Filament Guider, Which Is Made Of Metal Material With Smooth Surface, Reducing Friction Resistance And Ensuring Smooth Filament Feed-In..
Features
- Original Quality - 100% Original Creality Filament Runout Sensor. The outer cover is frosted, making it stylish and unique.
- Smooth Filament Travelling - The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
- Precise Detection - When filament feed-in normally, the blue LED indicator light shows. The blue LED turns off when the filament runs out.
- Wide Compatibility - This filament runout sensor is applicated for Ender 3 S1, Ender 3 S1 Pro, Ender 3 S1 Plus, CR-M4, CR-10 SE.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #9
BIGTREETECH Octopus V1.1 Control Board 32Bit Silent Motherboard Support 8 Axis TMC2209 Stepper Motor Driver Compatible BTT PI V1.2/PI 2 to Running Klipper/Marlin for Voron 2.4/CoreXY/VZbot 3D Printer
Asin: B094Y77FQN | Model: BIGTREETECH Octopus V1.1 | PartNumber: BIGTREETECH Octopus V1.1 | Ean: 0779605800352 | UPC: 779605800352
🐙【6 Pwm Fans Plus 2 】The Octopus V1.1 Mainboard Offers Up To 6 Controllable Pwm Fans And Additional 2 Without Control With The Possibility Of Voltage Selection From 5V, 12V Or 24V. The Btt Octopus Also Has 8 Sockets For Drivers, Making It An Ideal Electronics For Demanding Machines..
🐙【Type C Powers The Mcu】Plug The Jumper Cap Into The 5V Usb Power Supply Port Of The Motherboard. You Can Use The Type C Interface To Power The Motherboard, Which Makes It Easier For The Computer To Program Firmware. If The Jumper Cap Is Pulled Out, The Switching Power Supply Must Be Turned On When The Motherboard Is Connected To The Pc..
🐙【Multifunctional Interface】Octopus V1.1 Control Board Support Eddy V1.0, Bltouch, Microprobe Auto Bed Leveling Sensor, Sfs V2.0 Smart Filament Runout, Power Loss Detection, Ceb V1.0, Sksm V1.0, Automatic Power Down. Display Support Tft35 E3 V3.0.1/Tft35 V3.0/Tft50/70. When Running Klipper Touch Mode, Please Choose Hdmi5 V1.1 Or Tft35 Spi Touchscreen..
🐙【Supports Klipper/Marlin】Bigtreetech Direct Octopus V1.1 Control Board Compatible With Btt Pi V1.2/Pi 2, Supports Running Klipper And Marlin, Supports Firmware Update By Usb (Recommended) And Dfu Mode(Advanced Users). Updating Via Dfu Mode Is To Send Firmware To The Board Directly From Pc With No Need For Bootloader, Which Is Not Recommended For Novice Users..
🐙【Can Bus】Btt Octopus V1.1 Motherboard Supports Can Bus Connectivity Using An Ethernet Connector. This Can Bus Connection Allows To Expand Control Board With Other Expansion Boards Very Easily..
Features
- Main Control Chip BIGTREETECH Octopus V1.1 control board adoptes ARM Cortex-M4 series STM32F446ZET6 32-bit microcontroller at 180MHz with 512Kb flash ROM. Notice: Input voltage only supports 24V, 12V is not allowed.
- CAN BUS BTT Octopus V1.1 motherboard supports CAN Bus connectivity using an ethernet connector. This CAN Bus connection allows to expand control board with other expansion boards very easily.
- 6 PWM Fans Plus 2 The Octopus V1.1 Mainboard offers up to 6 controllable PWM fans and additional 2 without control with the possibility of voltage selection from 5V, 12V or 24V. The BTT Octopus also has 8 sockets for drivers, making it an ideal electronics for demanding machines.
- Supports Klipper/Marlin BIGTREETECH Direct Octopus V1.1 control board compatible with BTT Pi V1.2/Pi 2, supports running Klipper and Marlin, supports firmware update by USB (recommended) and DFU mode(advanced users). Updating via DFU mode is to send firmware to the board directly from PC with no need for bootloader, which is not recommended for novice users.
- Type C powers the MCU Plug the jumper cap into the 5V USB power supply port of the motherboard. You can use the Type C interface to power the motherboard, which makes it easier for the computer to program firmware. If the jumper cap is pulled out, the switching power supply must be turned on when the motherboard is connected to the PC.
- Multifunctional interface Octopus V1.1 control board support Eddy V1.0, BLTOUCH, Microprobe auto bed leveling sensor, SFS V2.0 Smart Filament runout, power loss detection, CEB V1.0, SKSM V1.0, automatic power down. Display support TFT35 E3 V3.0.1/TFT35 V3.0/TFT50/70. When running Klipper touch mode, please choose HDMI5 V1.1 or TFT35 SPI Touchscreen.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #10
Creality Ender 3 V3 SE Filament Runout Sensor, 3D Printer Filament Detector Sensor for Creality Ender 3 V3 SE, Ender 3 V3 KE
Asin: B0CQ57MFLT
【Upgraded Design】It Is Redesigned With New Inner Structure. The Outer Cover Is Frosted, Making It Stylish And Unique..
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Compatible】This Filament Runout Sensor Only Suit For Ender 3 V3 Se And Ender 3 V3 Ke, Not Suit For Other Printers..
【Precise Detection】 Blue Led Indicates Normal Filament Feed-In, When The Blue Led Turns Off, It Means Filament Runs Out..
Features
- Smooth filament travelling The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
- Precise Detection Blue LED indicates normal filament feed-in, when the Blue LED turns off, it means filament runs out.
- Upgraded Design It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
- Compatible This filament runout sensor only suit for Ender 3 V3 SE and Ender 3 V3 KE, not suit for other printers.
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #11
Creality Official Ender 3 V2 Filament Runout Sensor Kit, 3D Printer Smart Filament Break Detection Detector with 32 Bit V4.2.2/V4.2.7 Motherboard for Ender 3/3 Pro/3 Max, Ender 5 Plus
Asin: B0C4NX54KG
【Wide Compatibility】- Only Compatible With 32 Bits Mainboard Such As Version 4.2.2, And 4.2.7. This Filament Runout Sensor Is Applicated For Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 5 Plus, Ender 6, Cr-10 V3, Cr-10 Max, Cr-5Pro, Sv01, Etc..
【Professional Support】- To Ensure Your Pleasant Shopping Experience, Creality Has A Professional Customer Service Team To Solve Your Problems. If You Have Any Problems, Please Do Not Hesitate To Contact Us. We Will Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours..
【Package List】- 1 Pcs Filament Detection, 1 Pcs Mounting Plate, And 1Pcs Filament Detection Wire. Simple Structure, Easy Installation. Only Ender 3 Series Need To Replace The Extruder Bracket. Note: For Ender 3/Pro/V2, Please Flash Your Mainboard's Firmware Before Using, The Firmware Can Be Downloaded From Creality Official Website..
【Precise Detection】- When Filament Feed-In Normally, The Blue Led Indicator Light Shows. The Blue Led Turns Off When The Filament Runs Out..
Features
- Independent Modularized Design - It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique. Ender 3 filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no fiction, which can ensure the smooth feeding of filaments.
- Precise Detection - When filament feed-in normally, the blue LED indicator light shows. The blue LED turns off when the filament runs out.
- Wide Compatibility - Only compatible with 32 bits Mainboard such as version 4.2.2, and 4.2.7. This filament runout sensor is applicated for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 MAX, Ender 5 Plus, Ender 6, CR-10 V3, CR-10 Max, CR-5Pro, SV01, etc.
- Package List - 1 pcs filament detection, 1 pcs mounting plate, and 1pcs filament detection wire. Simple structure, easy installation. Only Ender 3 Series need to replace the extruder bracket. Note: For Ender 3/Pro/V2, please flash your mainboard's firmware before using, the firmware can be downloaded from Creality official website.
- Professional Support - To ensure your pleasant shopping experience, Creality has a professional customer service team to solve your problems. If you have any problems, please do not hesitate to contact us. We will provide friendly and fast customer service to solve your problem within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.13 pounds
See On Amazon #12
BIGTREETECH Eddy V1.0 Auto Bed Leveling Sensor for USB Port or Connected Manta M8P+CB1 Support Klipper 3D Printer Compatible with Voron2.4 Stealthburner Trident(TL-Q5MC2/PL-08N) BIQU Hurakan VzBOT
Asin: B0D3PVWH1T
3.Bigtreetech Eddy V1.0 Have Thermal Compensation Function And Z-Axis Return, Not Affected By Temperature Fluctuations. Integrate With Klipper's Temperature Compensation Function To Improve Leveling Accuracy And Avoid Temperature Drift..
5.Bigtreetech Eddy V1.0 Comes With A Customized 2.5M Usb Cable, Which Can Be Directly Connected To The Motherboards Though Usb, Such As Bigtreetech Pi/Pi2, Manta M8p+Cb1, Manta E3ez+Cb1, Octopus Maxez+Btt Pi, Etc., Providing You With True Plug And Play Convenience..
4.Bigtreetech Eddy V1.0 Must Run On A Metal Spring Steel Plate To Avoid Interference From Independent Magnets. If The Hot Bed Uses A Circular Magnet Scheme(Such As Prusa), It Will Cause Eddy To Be Unable To Function Properly; If It Is A Uniform Soft Magnetic Tile, It Can Also Be Used, Such As The Hot Bed Scheme Of Pei Steel Plate+Soft Magnetic..
2.Bigtreetech Eddy V1.0 Weighs As Little As 6G, Effectively Reducing The Impact Of Exercise, 0.0005Mm Precision Precise Leveling, And It Has A Small Size And Strong Compatibility. Anti Fooling Design, The Shell Is Set To A Limited Height, So There Is No Need To Worry About Metal Parts On The Coil Affecting Its Leveling And Use, Worry Free Installation Into The 3D Printer System..
Features
- 1.BIGTREETECH Eddy V1.0 has a fast leveling speed, heats up the bed in 20 seconds or less, making it friendly to large-sized printers, saving waiting time, and providing a better experience of the joy brought by 3D printers.
- 2.BIGTREETECH Eddy V1.0 weighs as little as 6g, effectively reducing the impact of exercise, 0.0005mm precision precise leveling, And it has a small size and strong compatibility. Anti fooling design, the shell is set to a limited height, so there is no need to worry about metal parts on the coil affecting its leveling and use, worry free installation into the 3D printer system.
- 3.BIGTREETECH Eddy V1.0 have thermal compensation function and Z-axis return, not affected by temperature fluctuations. Integrate with Klipper's temperature compensation function to improve leveling accuracy and avoid temperature drift.
- 4.BIGTREETECH Eddy V1.0 must run on a metal spring steel plate to avoid interference from independent magnets. If the hot bed uses a circular magnet scheme(such as Prusa), it will cause Eddy to be unable to function properly; If it is a uniform soft magnetic tile, it can also be used, such as the hot bed scheme of PEI steel plate+soft magnetic.
- 5.BIGTREETECH Eddy V1.0 comes with a customized 2.5M USB cable, which can be directly connected to the motherboards though USB, such as BIGTREETECH Pi/Pi2, Manta M8P+CB1, Manta E3EZ+CB1, Octopus MaxEZ+BTT Pi, etc., providing you with true plug and play convenience.
- See more on Amazon...
Brand: BIQU | Manufacturer: Octobigtree
See On Amazon #13
Filament Runout Pause Monitor Smart Filament Sensor Break Detection Module Detector Compatible with Elegoo Nepture 4, 4pro,4 max/Plus, 3 pro, 3 Plus/Max 3D Printer Accessories
Asin: B0CTJJGW61
This Sensor Is Compatible With Elegoo Nepture 3 Pro, 3 Max, 3Plus, And Nepture 4 Series Like Nepture 4, 4Pro, 4Plus And 4Max..
Package: 1Set Filament Sensor.
But Cannot Be Used For Nepture 3 Model 3D Printer, Please Know Before Ordering..
For Checking The Filament Whether Run Out Or Not, It Automatically Stops The 3D Printer When The Filament Runs Out, Very Smart Module.
Features
- Newly designed smart module, The main board executes the pause command operation when the filament is run out
- For checking the filament whether run out or not, it automatically stops the 3D Printer when the filament runs out, Very smart module
- This sensor is Compatible with ELEGOO Nepture 3 pro, 3 Max, 3PLUS, and Nepture 4 series like Nepture 4, 4pro, 4plus and 4Max.
- BUT CANNOT be used for Nepture 3 model 3D Printer, Please know before ordering.
- Package: 1set filament sensor
- See more on Amazon...
Brand: DORUNDEA | Manufacturer: DORUNDEA
See On Amazon #14
Befenybay 3D Printer Filament Detection Module Run-Out Pause Detecting Monitor Black for 1.75mm Filaments Detect Module Monitor Sensor
Asin: B07SFFXC9C | Model: BE021-fba | PartNumber: BE021-fba | Ean: 0824007540846 | UPC: 824007540846
Filament Detection Module: Newly Designed Smart Module ,The Main Board Executes The Pause Command Operation When The Filament Is Run Out.
For Use On Other Boards: The Material Detection Module Uses The Level Jump Detection Method. When There Is Material, The Level Signal Of The Detection Port Should Be High Level. When There Is No Material, The Level Signal Of The Material Port Goes Low, And The System Detects One. If The High-To-Low Transition Is Determined, The Material Is Considered Exhausted And A Pause Command Is Executed. After The Human Has Replaced The Material, The Printer Continues Printing.
3D Printer Accessories: Very Practical Filament Detection Sensor Module, Ideal Accessories For 3D Printer, Making Your Printing Work Smooth And Relieved..
Main Function: For Checking The Filament Is Whether Run Out Or Not, It Automatically Stops The 3D Printer When The Filament Runs Out.
Features
- Product Name: Material Inspection Module; Suitable for 1.75mm Filament
- MAIN FUNCTION: For checking the filament is whether run out or not, it automatically stops the 3D Printer when the filament runs out
- Filament Detection Module: Newly designed smart module ,The main board executes the pause command operation when the filament is run out
- 3D PRINTER ACCESSORIES: Very practical filament detection sensor module, ideal accessories for 3D printer, making your printing work smooth and relieved.
- For use on other boards: The material detection module uses the level jump detection method. When there is material, the level signal of the detection port should be high level. When there is no material, the level signal of the material port goes low, and the system detects one. If the high-to-low transition is determined, the material is considered exhausted and a pause command is executed. After the human has replaced the material, the printer continues printing
- See more on Amazon...
Brand: Befenybay | Manufacturer: Befenybay
Weight: 0.02 pounds
See On Amazon #15
Creality Ender-5 S1 Filament Sensor Kit, 3D Printer Filament Run Out Detector Kit for Ender-5 S1, K1, K1 Max, Sermoon D3 3D Printers
Asin: B0CBHB4L1R
The Hole Position Is Precise, The Filament Feeding Is Smooth, And It Is Made Of High-Quality Materials, Which Will Not Affect The Feeding Of The Extruder..
If You Have Any Questions About The Product, Please Feel Free To Contact Us, Our Professional After-Sales Team Will Reply You Within 24 Hours..
Sensitive: The Built-In Sensor Is Sensitive And Can Accurately Detect The Condition Of The Filament..
Easy Install: Creality Original Filament Sensorkit, Easy To Install And Use..
Features
- Compatible Models: This filament detector kit is compatible with Ender-5 S1, K1 Max, K1, Sermoon D3, CR-200B Pro 3D printers.
- Easy Install: Creality original filament sensorkit, easy to install and use.
- The hole position is precise, the filament feeding is smooth, and it is made of high-quality materials, which will not affect the feeding of the extruder.
- Sensitive: The built-in sensor is sensitive and can accurately detect the condition of the filament.
- If you have any questions about the product, please feel free to contact us, our professional after-sales team will reply you within 24 hours.
- See more on Amazon...
Brand: LANKEGU | Manufacturer: LANKEGU
See On Amazon #16
CREALITY CR6 SE Filament Runout Sensor Detection Module Pause Detecting Monitor for CR-6 Max, Ender 3 S1 Pro, Ender 7,3DPrintMill, CR30, Sermoon D1 3D Printer
Asin: B09B7HHF15 | Model: CR6 SE FIlament sensor | PartNumber: CR6 SE FIlament sensor
Precise Detection: Blue Led Indicates Normal Filament Feed-In. Blue Led Turns Off When Filament Runs Out..
Size: 40X31x18mm, Used For 1.75Mm Diameter Filament..
It Is Redesigned With New Inner Structure. The Outer Cover Is Frosted, Making It Stylish And Unique..
Smooth Filament Travelling: The Filament Sensor Has A Built-In Filament Guider, Which Is Made Of Metal Material With Smooth Surface, Reducing Friction Resistance And Ensuring Smooth Filament Feed-In..
Features
- Independent Modularized Design, Compatible with CR-6 SE, CR-6 MAX, Ender 3 S1, Ender 3 S1 Pro, CR-10 Smart, CR30, Sermoon D1 and 3DPrintMill 3D Printer, but not stuiable for Ender 3, Ender 3 Pro / V2, CR10, CR10 S4 and S5, please know before ordering.
- Smooth filament travelling: The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
- Precise Detection: Blue LED indicates normal filament feed-in. Blue LED turns off when filament runs out.
- It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
- Size: 40x31x18mm, used for 1.75mm diameter filament.
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Dimensions: 0.71 x 1.57 x 1.22 inches | Weight: 0.04 pounds
See On Amazon #17
BIGTREETECH SFS V2.0 Smart Filament Runout Sensor Upgrade Bi-Directional Photoelectric Filament Break Sensor for 1.75mm Filament for SKR Mini E3 V3.0 Manta M8P Octopus Pro BTT Pi Control Board
Asin: B0C77QS4TS | Model: BIGTREETECH SFS V2.0 | PartNumber: BIGTREETECH SFS V2.0
【Wide Compatibility, Easy Installation】Supports Bowden And Direct-Drive Extruders, With 3 Mounting Holes For Easy Mounting To Printer Using Bracket. Support Motherboards With Available Endstop Ports Or Dedicated Filament Runout Ports, Such As Bigtreetech Skr Mini E3 V3.0, Manta E3ez, Manta M8p, Octopus Pro, Etc. Please Consult Our Technical Support Before Using The Motherboard Without Filament Runout Port..
【Instructions For Use】Insert Filament From The Direct Quick Connector In Any Direction Of Smart Filament Sensor; The Red Light Will Illuminate When There Is No Filament In The Module. The Blue Light Will Flash When The Extrusion Is Normal. The Blue Light Will Stay On Or Off When There Is No Extrusion..
【Photoelectric Sensor Technology】Sfs V2.0 Adopts Photoelectric Sensor Technology, With Theoretical Detection Length Of 2.88Mm, Which Is More Accurate Than The 7Mm Of Sfs V1.0. Please Note: 2.88 Mm Is The Minimum Detection Length Required For The Sensor To Function Properly. If You Encounter Problem Of False Triggers, Try Increasing The Detection Length By 1Mm Increments Until The Problem Is Resolved..
【Multifunctional Detection】Sfs V2.0 Detects Extrusion Errors Caused By Filament Runout, Nozzle Clogging, Filament Tying, And Extruder Trouble. It Has Two Signal Outputs And Indicator Lights To Distinguish Between Clogging Or Filament Runout. Small And Lightweight, It Will Not Add Too Much Pressure To The Printer's Extrusion Head..
Features
- Bi-directional Feeding BIGTREETECH SFS V2.0 is bi-directional, there is no restriction on filament direction, giving you guys more flexibility during installation. It suitable for Marlin, Klipper, and RRF firmware.
- Multifunctional Detection SFS V2.0 detects extrusion errors caused by filament runout, nozzle clogging, filament tying, and extruder trouble. It has two signal outputs and indicator lights to distinguish between clogging or filament runout. Small and lightweight, it will not add too much pressure to the printer's extrusion head.
- Wide Compatibility, Easy Installation Supports Bowden and Direct-Drive extruders, with 3 mounting holes for easy mounting to printer using bracket. Support motherboards with available endstop ports or dedicated filament runout ports, such as BIGTREETECH SKR Mini E3 V3.0, Manta E3EZ, Manta M8P, Octopus Pro, etc. Please consult our technical support before using the motherboard without filament runout port.
- Photoelectric Sensor Technology SFS V2.0 adopts photoelectric sensor technology, with theoretical detection length of 2.88mm, which is more accurate than the 7mm of SFS V1.0. Please Note: 2.88 mm is the minimum detection length required for the sensor to function properly. If you encounter problem of false triggers, try increasing the detection length by 1mm increments until the problem is resolved.
- Instructions for use Insert filament from the direct quick connector in any direction of smart filament sensor; The red light will illuminate when there is no filament in the module. The blue light will flash when the extrusion is normal. The blue light will stay on or off when there is no extrusion.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Warranty: 1年保修
See On Amazon #18
TriangleLab Filament Runout Sensor Detector for 3D Printer 1.75mm Filament
Asin: B07DHD8WHF | Model: TL-RS | PartNumber: TL-RS | Ean: 0799924451653 | UPC: 799924451653
1Pc Runout Sensor, 1Pc 3Pin Cable, 3Pc Cable Connectors, 2Pcs Screws W/ Nuts, 1Pc Ptfe Tube.
The Sensor Will Send The Signal To The Printer When The Filament Is Run Out And Printer Will Pause The Print Job Until The New Filament Is Loaded When The Printer W/ Correct Firmware And Setting..
Features
- This filament runout sensor is designed for detect whether your filament is run out during the printing process.
- The sensor will send the signal to the printer when the filament is run out and printer will pause the print job until the new filament is loaded when the printer w/ correct firmware and setting.
- 1pc Runout Sensor, 1pc 3pin Cable, 3pc Cable Connectors, 2pcs Screws w/ nuts, 1pc PTFE Tube
- See more on Amazon...
Brand: GO-3D PRINT | Manufacturer: GO-3D PRINT
See On Amazon #19
Aluminum 3D Printer Parts Filament Break Module Detector Sensor Run Out Pause Monitor for Creality CR-10 V3 V2 / SV03 / CR-10S Pro V2 / CR10 Max/Ender 3 Max/Ender-6 /CR-3040 Pro (Filament Sensor)
Asin: B09CH29Y6G | Model: CR10 Filament runout sensor | PartNumber: CR10 Filament runout sensor
Filament Breakage Detection Device Contains Micro Switch, Using The Principle Of Mechanical Proximity Switch, No Friction, Can Ensure The Smooth Feeding Of Filaments..
Original From Creality, Can Be Used Without Any Adjustment For Creality Cr-10 V3 / Sv03 / Cr-10 V2/ Cr-10S Pro /Cr-10S Pro V2 / Cr-10 Max /Cr-10 Max /Ender-3 Max / Ender-6 /Cr-3040 Pro /Cr-5Pro 3D Printer.
Precise Detection: Blue Led Indicates Normal Filament Feed-In; Blue Led Turns Off When Filament Runs Out..
This Filament Breakage Sensor Save Your Filaments When A Strike Occures. Its Cover Is Made From Aluminum Material, Red Surface Treatment, Looks Beautiful..
Features
- This 1.75mm filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
- This Filament breakage sensor save your filaments when a strike occures. Its cover is made from Aluminum material, red surface treatment, looks beautiful.
- Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments.
- Precise Detection: Blue LED indicates normal filament feed-in; Blue LED turns off when filament runs out.
- Original from Creality, can be used without any adjustment for Creality CR-10 V3 / SV03 / CR-10 V2/ CR-10S Pro /CR-10S Pro V2 / CR-10 Max /CR-10 Max /Ender-3 Max / Ender-6 /CR-3040 Pro /CR-5Pro 3D Printer
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Dimensions: 0.59 x 1.57 x 1.46 inches | Weight: 0.11 pounds
See On Amazon
Looking For Something Else?
Search