maXpeedingrods Coilovers for Honda Civic Hatchback 2016-2021, 24 Level Damper Adjustable Coilovers Suspension Kit, Complete Assemblies Coil Struts Shock Absorber, Lowering Kit T6 Upgraded Coilovers
Asin: B0C89L6S1D
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Spring Rate】 Front: 6Kg/Mm (336 Lbs/In) & Rear: 5.5 Kg/Mm (308 Lbs/In); Spring Length Front: 180Mm & Rear: 195Mm; Spring Inner Diameter Front: 70.5Mm & Rear: 60-71Mm; Coilover Overall Length Front: 378Mm ~440Ｍｍ & Rear: 483Mm ~600Ｍｍ; Spring Preload: 7-10 Mm.
【Lower Height】 The Height Is Adjustable For 1-3 Inches, Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Strut Will "Lowering Your Car" And Does Not Keep To Original Ride Height..
【Damper & Height Adjustable】 These Coilover Kits With 24 Ways Damping Adjustment And 1" - 3" Ride Height Adjustment, Allows You The Ability To Perfectly Dial In Your Coilover Setup, And Ensure You Experience A Better Ride Quality In All Road Conditions With More Aggressive Stance, Upgraded Damper Adjust Knob Makes Damping Setting Easier.
【Application】 For Honda Civic Hatchback Models 2016 2017 2018 2019 2020 2021 Note:52Mm Clamp Diameter Only, Excluding Coupe And Sedan, Excluding Si And Type-R Model.
Features
- T6 Serie Suitable for users who pursue higher performance in street driving. Upgraded springs, high-quality damping oil with better viscosity, have good adhesion, corrosion resistance, and damping performance at extreme temperatures; Improved operation and adjusted valve coefficients. This greatly improves comfort and stability.
- Application For Honda Civic Hatchback models 2016 2017 2018 2019 2020 2021 note:52mm clamp diameter only, excluding coupe and sedan, excluding Si and type-R model
- Spring rate Front: 6kg/mm (336 lbs/in) & Rear: 5.5 kg/mm (308 lbs/in); Spring length Front: 180mm & Rear: 195mm; Spring inner diameter Front: 70.5mm & Rear: 60-71mm; Coilover overall length Front: 378mm ~440 & Rear: 483mm ~600 ; Spring Preload: 7-10 mm
- Damper & Height Adjustable these coilover kits with 24 ways damping adjustment and 1 - 3 ride height adjustment, allows you the ability to perfectly dial in your coilover setup, and ensure you experience a better ride quality in all road conditions with more aggressive stance, upgraded damper adjust knob makes damping setting easier
- Lower Height The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These Coilovers Strut will Lowering your car and DOES NOT keep to Original Ride Height.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 7.87 x 25.20 x 20.08 inches | Weight: 56.88 pounds
See On Amazon Similar To maXpeedingrods Coilovers for Honda Civic
#1
maXpeedingrods Coilover Adjustable for Honda Civic 1989-2000 CRX 1989-1991 Delsol 1993-1997 for Acura Integra 1994-2001, 24 Level Adjustable Damper Spring Shock Absorber, Red Suspension Kit Struts
Asin: B0784QQWL5
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & 5 Kg/Mm (280 Lbs/In) With Spring Preload: 7-10 Mm. Spring Length Front: 180Mm & Spring Length Rear: 180Mm; Coilover Overall Length Front: 365Mm-410Mm & Coilover Overall Length Rear: 435Mm-480M.
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Adjustable Height】 The Height Is Adjustable For 1-3 Inches(Notice: The Coilovers Kit Will "Lower Your Car" And Does Not Keep To The Original Ride Height.), Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【24 Rebound Force Levels】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- Fit Perfectly For Honda Civic 1989-1991 ED2 ED3 ED4 ED6 ED7 EC8 EE9; For Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9; For Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1; For Honda CRX 1989-1991 ED8 ED9 EE8; For Honda Delsol 1993-1997 EG1; For Acura Integra 1994-2001 DC2 DC4 (Rear Fork Type Bracket Model Only)
- 24 Rebound Force Levels Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & 5 kg/mm (280 lbs/in) with spring preload: 7-10 mm. Spring length Front: 180mm & Spring length Rear: 180mm; Coilover overall length Front: 365mm-410mm & Coilover overall length Rear: 435mm-480m
- Adjustable Height The height is adjustable for 1-3 inches(Notice: The coilovers kit will Lower your car and does not keep to the original ride height.), allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 Inches
See On Amazon #2
maXpeedingrods Coilover for Ford Mustang 1994-2004, 24 Levels Damper Adjustable Coilovers Suspension Kit, Coil Spring Shock Absorber Struts, for Mustang Coilovers Lowering Kit by 1-3 Red
Asin: B078LCZDCS
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & Rear Spring Rate: 7 Kg/Mm (392 Lbs/In); Spring Length Front: 230Mm & Spring Length Rear: 180Mm; Coilover Overall Length Front: 485Mm-575Mm & Coilover Overall Length Rear: 550Mm-600Mm.
【Double-Tube Structure】 Compared To Mono-Tube Construction, Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Adjustable Height】 The Height Is Adjustable: Front 485-575Mm，Rear 550-600Mm, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【24 Ways Adjustable Damper】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- Fit Perfectly For Ford Mustang Base SN95 Convertible/Coupe 1994-2004; For Ford Mustang GT SN95 Convertible/Coupe 1994-2004
- 24 Ways Adjustable Damper Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & Rear Spring rate: 7 kg/mm (392 lbs/in); Spring length Front: 230mm & Spring length Rear: 180mm; Coilover overall length Front: 485mm-575mm & Coilover overall length Rear: 550mm-600mm
- Adjustable Height The height is adjustable: front 485-575mm rear 550-600mm, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- Double-tube Structure Compared to mono-tube construction, will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 27.95 x 20.08 inches
See On Amazon #3
maXpeedingrods Coilovers for Honda Civic 1989-2000, CRX 1989-1991, Delsol 1993-1997, for Acura Integra 1994-2001, Adjustable Height Coilovers Suspension Kit Spring Shock Absorber, Lowering Kit Red
Asin: B083BW1F87
【Adjustable Height】 The Height Is Adjustable For 1-3 Inches(Notice: The Coilovers Kit Will "Lower Your Car" And Does Not Keep To The Original Ride Height.), Allowing You To Have A More Aggressive Stance, This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & 5 Kg/Mm (280 Lbs/In) With Spring Preload: 7-10 Mm. Spring Length Front: 180Mm & Spring Length Rear: 180Mm; Coilover Overall Length Front: 365Mm-410Mm & Coilover Overall Length Rear: 435Mm-480M.
Features
- Fit Perfectly For Honda Civic 1989-1991 ED2 ED3 ED4 ED6 ED7 EC8 EE9; For Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9; For Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1; For Honda CRX 1989-1991 ED8 ED9 EE8; For Honda Delsol 1993-1997 EG1; For Acura Integra 1994-2001 DC2 DC4 (Rear Fork Type Bracket Model Only)
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & 5 kg/mm (280 lbs/in) with spring preload: 7-10 mm. Spring length Front: 180mm & Spring length Rear: 180mm; Coilover overall length Front: 365mm-410mm & Coilover overall length Rear: 435mm-480m
- Adjustable Height The height is adjustable for 1-3 inches(Notice: The coilovers kit will Lower your car and does not keep to the original ride height.), allowing you to have a more aggressive stance, This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 inches | Weight: 42.86 Pounds
See On Amazon #4
maXpeedingrods Racing Coilovers for Honda Civic 1989-2000, for Honda CRX 1989-1991,for Honda Delsol 1993-1997, for Acura Integra 1994-2001, 24 Ways Damper Adjustable Coilovers Suspension Kit, Black
Asin: B0BPSB1PF2
【Spring Rate】Spring Rate Front: 11 Kg/Mm (616 Lbs/In) & Spring Rate Rear: 7 Kg/Mm (392 Lbs/In); Spring Length Front: 180Mm & Spring Length Rear: 180Mm; Spring Inner Diameter Front: 70.5Mm & Spring Inner Diameter Rear: 70.5Mm; Spring Preload: 7-10 Mm.
【High Quality】 Most Components Of The Coilover Systems, Including Mounts, Collars, Spring Perches And Even The Lock Ring, Are Made From 6061-T6 Billet Aluminum For Durable And Rust Resistant; These Shock Assemblies Are With Machined Parts And Anti-Corrosion Finish With Anodized Aluminum And Powder Coated Carbon Cteel Parts.
【Adjustable Performance】 These Coilover Kits With 24 Ways Damping Adjustment And 1" - 3" Ride Height Adjustment（Notice: The Coilovers Kit Will "Lower Your Car" And Does Not Keep To The Original Ride Height.）, Allows You The Ability To Perfectly Dial In Your Coilover Setup, And Ensure You Experience A Better Ride Quality In All Road Conditions With More Aggressive Stance, Upgraded Damper Adjust Knob Makes Damping Setting Easier.
【Application】 For Honda Civic 1992-1995 Eg1 Eg2 Eg3 Eg4 Eg5 Eg6 Eg8 Eg9 Ej1 Ej2 Eh2 Eh3 Eh9 Rear Fork Type Bracket Model Only; For Honda Civic 1995-2000 Ek2 Ek3 Ek4 Ej6 Ej7 Ej8 Em1 Rear Fork Type Bracket Model Only; For Honda Delsol 1993-1997 Eg1 Rear Fork Type Bracket Model Only;.
Features
- T7 Serie: Born for Track Compared with T6 series the main change is the spring coefficient and damping oil: the spring coefficient is more suitable for racing, and the corresponding damping has also been adjusted with the spring; At the same time, race damping oil is used to ensure excellent performance of the track. Of course, it is also applicable to the demand for high performance street performance
- Application For Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9 Rear Fork Type Bracket Model Only; For Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1 Rear Fork Type Bracket Model Only; For Honda Delsol 1993-1997 EG1 Rear Fork Type Bracket Model Only;
- Spring rate Spring rate Front: 11 kg/mm (616 lbs/in) & Spring rate Rear: 7 kg/mm (392 lbs/in); Spring length Front: 180mm & Spring length Rear: 180mm; Spring inner diameter Front: 70.5mm & Spring inner diameter Rear: 70.5mm; Spring Preload: 7-10 mm
- Adjustable Performance these coilover kits with 24 ways damping adjustment and 1 - 3 ride height adjustment Notice: The coilovers kit will Lower your car and does not keep to the original ride height. , allows you the ability to perfectly dial in your coilover setup, and ensure you experience a better ride quality in all road conditions with more aggressive stance, upgraded damper adjust knob makes damping setting easier
- High Quality Most components of the coilover systems, including mounts, collars, spring perches and even the lock ring, are made from 6061-T6 billet aluminum for durable and rust resistant; these shock assemblies are with machined parts and anti-corrosion finish with anodized aluminum and powder coated carbon cteel parts
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
See On Amazon #5
maXpeedingrods Coilovers for Honda Accord VIII 2008-2015, for Acura TSX Euro 2008-2015, Adjustable Height Coilovers Suspension Kit, Coil Spring Shock Absorber, Amortiguador Lowering Kit by 1-3 Red
Asin: B07YY8TR4L
【Lowering Kits】 The Height Adjustable By 1-3 Inches, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Front Spring Rate: 10 Kg/Mm (560 Lbs/In) & Rear Spring Rate: 7 Kg/Mm (392 Lbs/In) With Spring Preload: 7-10 Mm. Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
Features
- Fit Perfectly For Honda Accord VIII LX,SE,LX-P sedan CP2 2008-2012; For Honda Accord VIII LX,SE,LX-P sedan CP3 2008-2012; For Honda Accord VIII LX,SE,LX-P coupe CS1(north American only) 2008-2012; For Honda Accord VIII LX,SE,LX-P CS2 (north American only) 2008-2012; For Honda Accord VIII LX,SE,LX-P sedan CU1 CU2 CU3 2008-2015; For Honda Accord VIII Tourer 5-door wagon CW1 2008-2015; For Acura TSX (North America) 2008-2015; For Accord Euro Australia and New Zealand 2008.6-2015.7
- Spring Rate Front Spring rate: 10 kg/mm (560 lbs/in) & Rear Spring rate: 7 kg/mm (392 lbs/in) with spring preload: 7-10 mm. Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 inches
See On Amazon #6
maXpeedingrods Coilovers for Audi A4 2000-2009, Coil Spring Shock Absorber Height Adjustable Coilovers Suspension Kit Struts, Complete Assemblies Amortiguador Lowering Kit Gold
Asin: B07D6Q9S4V | Model: A4 | PartNumber: A4
【Adjustable Height】 Adjustable Height: Lowering By 1”. It’S A Replacement Part That Retains Maximum Height And Comfort Of The Original..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Spring Rate Front: 9 Kg/Mm (504 Lbs/In) & Spring Rate Rear: 12 Kg/Mm (672 Lbs/In); Spring Length Front: 190Mm & Spring Length Rear: 190Mm; Coilover Overall Length Front: 460Mm-520Mm & Coilover Overall Length Rear: 400Mm-450Mm.
Features
- Application For Audi A4 Avant (8E5, B6) 2000-2005 3 /1.9 TDI /1.8 T /2.0 FSI; For Aud A4 Convertible (8H7, B6, 8HE, B7) (01/2002-12/2009) 3/1.8 T/2/ 2.7 TDI; For Aud A4 (8E2, B6) (11/2000-12/2005)1.8 T quattro /3.0 quattro; For Aud A4 Avant (8ED, B7) (11/2004-06/2008) 2 /1.6 /2.0 TFSI /1.8 T /1.9 TDI; For Aud A4 (8EC, B7) (11/2004-06/2008)2.0 TFSI quattro/ 1.8 T quattro. NOTE: Front OE top mounts need to be modified ( drill bigger hole for shaft)
- Spring Rate Spring rate Front: 9 kg/mm (504 lbs/in) & Spring rate Rear: 12 kg/mm (672 lbs/in); Spring length Front: 190mm & Spring length Rear: 190mm; Coilover overall length Front: 460mm-520mm & Coilover overall length Rear: 400mm-450mm
- Adjustable Height Adjustable height: lowering by 1 . It s a replacement part that retains maximum height and comfort of the original.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 27.95 x 20.08 Inches | Weight: 54.81 Pounds
See On Amazon #7
maXpeedingrods Coilovers for Toyota Corolla 1987-2002, Coil Spring Shock Absorber, Height Adjustable Coilovers Suspension Kit, for Toyota Corolla E90 E100 E110 AE92 AE101 AE111 Lowering Kit Gold
Asin: B0979G71N4
【Lowering Kits】 The Height Adjustable By 1-3 Inches, Allowing You To Have A More Aggressive Stance. This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will "Lower Your Car" And Does Not Keep To Original Ride Height..
【Excellent Material】The Product Comes With 6061 Aluminum Alloy With T6 For Increased Hardness, High Quality Precision Parts, High Strength And Durability. It Is Fully Loaded And Safe For Installation..
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Spring Rate】 Front Spring Rate: 8 Kg/Mm (448 Lbs/In) & Rear Spring Rate: 6 Kg/Mm (336 Lbs/In) With Spring Preload: 7-10 Mm. Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
Features
- Fit Perfectly For Toyota Corolla E90 1987 1992 For Toyota Corolla E100 1991 1998; For Toyota Corolla E110 1995-2002 For Toyota Corolla AE92 1987-1991 For Toyota Corolla AE101 1992-1998 For Toyota Corolla AE111 1988-2002
- Spring Rate Front Spring rate: 8 kg/mm (448 lbs/in) & Rear Spring rate: 6 kg/mm (336 lbs/in) with spring preload: 7-10 mm. Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- Excellent Material The product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 25.20 x 20.08 inches | Weight: 58.82 pounds
See On Amazon #8
maXpeedingrods Coilover for Infiniti M35/M45 2006-2010, for Infiniti G35x 2003-2008, for G37x 2008-2013, 24 Level Damper Adjustable Coilovers Suspension Kit, Spring Shock Absorber Lowering Kit,Gold
Asin: B07K4BRZ9V
【Spring Rate】 Front Spring Rate: 12 Kg/Mm (672 Lbs/In) & Rear Spring Rate: 10 Kg/Mm (560 Lbs/In). Spring Length Front: 160Mm & Spring Length Rear: 200Mm; Coilover Overall Length Front: 340Mm-410Mm & Coilover Overall Length Rear: 500Mm-590Mm.
【Twin-Tube Structure】 Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Lowering Kits】 The Height Is Adjustable For 1-3 Inches, Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response.(Note): These Coilovers Struts Will ""Lower Your Car"" And Does Not Keep To Original Ride Height..
【24 Rebound Force Levels】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosities Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs..
Features
- Fit Perfectly For Infiniti M35x 2006-2010 AWD; For Infiniti M45x 2006-2010 AWD; For Infiniti G35x 2003-2008 AWD; For Infiniti G37x 2008-2013 AWD (Note: Will not fit RWD model; Rear true coilover)
- 24 Rebound Force Levels Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosities use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.
- Spring Rate Front Spring rate: 12 kg/mm (672 lbs/in) & Rear Spring rate: 10 kg/mm (560 lbs/in). Spring length Front: 160mm & Spring length Rear: 200mm; Coilover overall length Front: 340mm-410mm & Coilover overall length Rear: 500mm-590mm
- Lowering Kits The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.(NOTE): These coilovers struts will Lower your car and DOES NOT keep to original ride height.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 inches | Weight: 47.66 pounds
See On Amazon #9
maXpeedingrods Coilovers for Honda Civic DX EX EM2/ES ET 2001-2005, Spring Shock Absorber Struts, 24 Levels Damper Adjustable Coilovers Suspension Kit, Grey Body witth Black Spring Lowering Kit
Asin: B0CL95SNVC
【Spring Rate】Front: 10 Kg/Mm (556 In/Lbs) & Rear: 6 Kg/Mm (336 In/Lbs). Hi Tensile Performance Spring - Under 600,000 Times Continuously Test, The Spring Distortion Is Less Than 0.04%. Plus, The Special Surface Treatment Is To Improve The Durability And Performance..
【Twin-Tube Structure】Compared To Mono-Tube Construction, The Twin-Tube Has Longer Stroke And Higher Height Adjustability, And They Will Give You A More Comfortable Riding Experience By Reducing The Pressure On The Joints And Also Minimizing Friction And Ensuring Sufficient Travel With Less Effort..
【Adjustable Height】The Height Is Adjustable For 1-3 Inches, Allowing You To Have A More Aggressive Stance, Allowing You To Have A More Aggressive Stance.This Design Helps Eliminate Turning Noise And Also Improves Steering Feel And Response. In Addition, We Have Adopted A Deep Groove Ball Bearing Structure To Help Eliminate Cornering Noise And Also Improve Steering Feel And Response..
【24 Rebound Force Levels】 Level 0-8 Suggest For Street Use；Level 9-16 Suggest For Mountain Anfractuosity Use；Level 17-24 Suggest For Race Tracks Use. You Can Adjust It At Any Time To Suit Your Needs.
Features
- Application For Honda civic VII DX/EX/GX/HX/LX/Si Coupe (EM2) 2001-2005; For Honda civic VII DX/EX/GX/HX/LX/Si Sedan (ES, ET) 2001-2005
- 24 Rebound Force Levels Level 0-8 suggest for street use Level 9-16 suggest for mountain anfractuosity use Level 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs
- Spring Rate Front: 10 kg/mm (556 in/lbs) & Rear: 6 kg/mm (336 in/lbs). Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04%. Plus, the special surface treatment is to improve the durability and performance.
- Adjustable Height The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.
- Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort.
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 inches | Weight: 50.40 pounds
See On Amazon #10
maXpeedingrods Coilovers for Honda Civic 2006-2011, Coilovers for Acura CSX 2006-2011, Coil Spring Shock Absorber, 24 Levels Damper Adjustables Coilovers Suspension Kit T6 Upgrade Coilovers, Blue
Asin: B09NVPMHF3
【Spring Rate】 Front: 7 Kg/Mm(392 Lbs/In), Rear: 6 Kg/Mm (336 Lbs/In), The Springs Are Made From Race Grade 55Crsi Spring Steel And With Continuously Stress Test To Ensure Supreme Strength And Reliability.
【High Quality Made】 The Coilover Is Cnc Machined And Most Components Are Made From 6061-T6 Billet Aluminum, Anodized Aluminum And Powder Coated Carbon Steel Accessories For Anti-Corrosion, It Is The Perfect Combination Of Street Usability And Durability And Provifing Professional Performance Adjustability And Handling.
【Perfect Adjustability】 Twin Tube Shocks With 24 Ways Damping Adjustment And 1" - 3" Ride Height Adjustment, Allows You The Ability To Perfectly Dial In Your Coilover Setup, And Ensure You Experience A Better Ride Quality In All Road Conditions With More Aggressive Stance, Upgraded Damper Adjust Knob Makes Damping Setting Easier.
【Application】 For Honda Civic & Si Viii 2-Door Coupe (Fg1/Fg2) 2006-2011; For Honda Civic & Si Viii 4-Door Sedan (Fa1/Fa2/Fa3/Fa4/Fa5, North America Only) 2006-2011; For Honda Civic & Si Viii 4-Door Sedan (Fd1/Fd2/Fd3/Fd4/Fd6/Fd7, International Model) 2006-2011; For Acura Csx 4-Door Sedan（Canada）2006-2011.Note: Not For The Mugen Trim Level.
Features
- T6 Serie Suitable for users who pursue higher performance in street driving. Upgraded springs, high-quality damping oil with better viscosity, have good adhesion, corrosion resistance, and damping performance at extreme temperatures; Improved operation and adjusted valve coefficients. This greatly improves comfort and stability.
- Application For Honda Civic & Si VIII 2-door coupe (FG1/FG2) 2006-2011; For Honda Civic & Si VIII 4-door sedan (FA1/FA2/FA3/FA4/FA5, North America only) 2006-2011; For Honda Civic & Si VIII 4-door sedan (FD1/FD2/FD3/FD4/FD6/FD7, International model) 2006-2011; For Acura CSX 4-door sedan Canada 2006-2011.Note: not for the Mugen trim level
- SPRING RATE Front: 7 kg/mm(392 lbs/in), Rear: 6 kg/mm (336 lbs/in), The springs are made from race grade 55CrSi spring steel and with continuously stress test to ensure supreme strength and reliability
- PERFECT ADJUSTABILITY Twin tube shocks with 24 ways damping adjustment and 1 - 3 ride height adjustment, allows you the ability to perfectly dial in your coilover setup, and ensure you experience a better ride quality in all road conditions with more aggressive stance, upgraded damper adjust knob makes damping setting easier
- HIGH QUALITY MADE The coilover is CNC machined and most components are made from 6061-T6 billet aluminum, anodized aluminum and powder coated carbon steel accessories for anti-corrosion, it is the perfect combination of street usability and durability and provifing professional performance adjustability and handling
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 8.27 x 24.80 x 20.08 inches | Weight: 55.12 pounds
See On Amazon
Looking For Something Else?
Search