LEER ROLLITUP | Fits 2007-2013 GM Chevy Silverado/GMC Sierra with 6'5" Bed | Soft Roll Up Truck Bed Tonneau Cover | 4R159 | Low-Profile, Sturdy, Easy 15-Minute Install
Asin: B0C91RP838 | Model: Rolling | PartNumber: Rolling | Ean: 0810059881488 | UPC: 810059881488
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.101 Percent Bed Access – When You’Re Ready To Access Your Bed, The Rollitup Allows You The Ability To Have Full Access To Your Bed, Without The Removal Of Your Tonneau. Each Rollitup Cover Uses A Velcro Brand Hook & Loop Strip On The Sides And A One-Step Cable Release To Unlock The Cover..
Fitment – Please Double Check That Your Truck’S Year, Make, Model, And Bed Length Fit This Application Before Purchasing..
No-Drill Installation – With An Easy And Fast Installation Process, Our Rollitup Comes With The Tools And Instructions To Install Your Tonneau In Minutes..
Built To Last – Our Cover Is Made Out Of Heavy-Duty 24-Ounce Tear-Resistant, Marine-Grade Vinyl, With 3 Built-In Crossbars That Offer Support When The Cover Is Lying Flat. Our Side Rails And Clamps Are Made Of 6063 Aluminum, Which Is Corrosion-Resistant..
Features
- FITS PERFECT/EASY TO LATCH ROLLITUP tonneau covers fit perfectly on your bed rails and each part number is specifically designed for your model truck! Our ROLLITUP has an easy to latch mechanism that closes and locks at the end of the tailgate. Each cover has an adjustable tension system, keeping your ROLLITUP tight and wrinkle-free in any weather condition.
- BUILT TO LAST Our cover is made out of heavy-duty 24-ounce tear-resistant, marine-grade vinyl, with 3 built-in crossbars that offer support when the cover is lying flat. Our side rails and clamps are made of 6063 aluminum, which is corrosion-resistant.
- 101 PERCENT BED ACCESS When you re ready to access your bed, the ROLLITUP allows you the ability to have full access to your bed, without the removal of your tonneau. Each ROLLITUP cover uses a Velcro Brand hook & loop strip on the sides and a one-step cable release to unlock the cover.
- NO-DRILL INSTALLATION With an easy and fast installation process, our ROLLITUP comes with the tools and instructions to install your tonneau in minutes.
- FITMENT Please double check that your truck s year, make, model, and bed length fit this application before purchasing.
- See more on Amazon...
Brand: LEER | Manufacturer: LEER
Warranty: Limited Lifetime Warranty
See On Amazon Similar To LEER ROLLITUP Fits 20072013 GM
#1
Vanshly 1 Pair 83515 & 83514 Truck Cap Rotary Latch Compatible with Leer 100XL/XR/XQ/180XL 700 tonneau
Asin: B0CMCM77MJ | Model: Leer 100XL/XR/XQ/180XL 700 tonneau | PartNumber: Leer 100XL/XR/XQ/180XL 700 tonneau
√【Fitment Type】Direct Replacement.
√【Service】If You Encounter Problems During The Installation Process, Please Contact Us Immediately..
√【Package Include】This Kit Will Come With A Both Driver Side And Passenger Side Latch And No Hardware.
√【Compatible With 】These Are Used On Leer 100Xr, 100Xl And 100Xq 180Xl Truck Caps. They Are Also Used On The Leer 700 Fiberglass Tonneau Cover..
Features
- Part Number 83515 driver side and #83514 passenger side
- Compatible with These are used on Leer 100XR, 100XL and 100XQ 180XL truck caps. They are also used on the Leer 700 fiberglass tonneau cover.
- Fitment Type Direct Replacement
- Package Include This kit will come with a both driver side and passenger side latch and no hardware
- Service If you encounter problems during the installation process, please contact us immediately.
- See more on Amazon...
Brand: Vanshly | Manufacturer: Vanshly
See On Amazon #2
(2 Pcs) Truck Cap Replace for LEER # 92579 Rotary Latch Cables for Leer 100XL/100XR/100XQ and for Century
Asin: B0CD45QZT7 | Model: 92579 | PartNumber: 92579
✅Manufacturer Part Number: 92579.
✅High Quality And Perfect Matching.Cable Length Is Approximately 36" Long And You Will Receive 2 Cables With This Listing.
✅Service:All Products Have Been Inspected And Tested.If Any Issue Arises With The Product,Rest Assured That We Are Here To Assist You Promptly And Without Hesitation.
✅Fitment Type: Direct Replacement.
✅Item Type: 2 Rotary Latch Cables！.
Features
- Color: Black
- Item Type: 2 Rotary Latch Cables
- Manufacturer Part Number: 92579
- Fitment Type: Direct Replacement
- High quality and perfect matching.Cable length is approximately 36 long and you will receive 2 cables with this listing
- Service:All products have been inspected and tested.If any issue arises with the product,rest assured that we are here to assist you promptly and without hesitation
- See more on Amazon...
Brand: Camotokiit | Manufacturer: Camotokiit
Warranty: 90 Days
See On Amazon #3
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B07F946Z1V | Model: 157094-45-10 | PartNumber: 157094-45-10
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-23993 Or Stabilus #14269. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Medium Height And Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 60-80 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for medium height and weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that it can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approximately 60-80 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-23993 or Stabilus #14269. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches
See On Amazon #4
2 Truck Upfitters 12" Gas Props (12.2" ext, 7.5" comp, 40 lbs ea) for are Snugtop Leer Camper Doors & ONLY Aluminum Weatherguard ONLY Toolboxes. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B074PYKFCY | Model: 12”, 40 lbs | PartNumber: 12”, 40 lbs | Ean: 0709832096709 | UPC: 709832096709
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Not For Steel Toolboxes- Will Not Hold Up Lid. Fit Most Weatherguard Aluminum Truck Bed Toolboxes Only, Models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible With Many Truck Canopy Types, Including Leer, Are, Century, Snugtop, And Atc Tops, & Many Other Brands That Utilize Gas Shocks / Gas Springs / Gas Lifts. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, & Suspa..
Equivalent To Suspa #C16-11028, Stabilus #19068, Or Weatherguard 7009-2Pk . Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors & Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Other Toolbox Struts, Etc. These Gas Shock Lift Supports Can't Be Compressed By Hand. They Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position..
Truck Upfitters Pair (2 Total) Of 40 Pound (Each) Gas Struts. 12.2" Extended Length And 7.5" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 40 Lbs Of Pressure, For A Total Of 80 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 80 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair (2 total) of 40 pound (each) gas struts. 12.2 extended length and 7.5 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 40 lbs of pressure, for a total of 80 lbs of pressure. Please note that this does not mean that it can lift something that is 80 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Equivalent to Suspa #C16-11028, Stabilus #19068, or Weatherguard 7009-2PK . Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors & awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, other toolbox struts, etc. These gas shock lift supports CAN'T be compressed by hand. They MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position.
- NOT FOR STEEL TOOLBOXES- WILL NOT HOLD UP LID. Fit most Weatherguard ALUMINUM truck bed toolboxes ONLY, models 121-0-01, 121-5-01, 123-0-01, 123-5-01, 127-0-01, 127-5-01, 131-0-01, 131-5-01, 137-0-01, 137-5-01, 147-0-01, 147-5-01, 154-0-01, 154-5-01. Compatible with many truck canopy types, including LEER, ARE, Century, Snugtop, and ATC tops, & many other brands that utilize gas shocks / gas springs / gas lifts. Compatible with many gas lift brands, including stabilus, lift o mat, & Suspa.
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 12.50 x 0.50 inches | Weight: 0.69 pounds
See On Amazon #5
Fit LEER Tonneau Cover 700 and 550 Series Pair of Black C Striker Plates # 80351
Asin: B0CD7RZN5G | Model: tonneau cover hardware | PartNumber: tonneau cover hardware
Manufacturer Part Number: 80351.
Includes (2) # 80351 C Striker Plates.
Mounting Hardware Included: No.
Color: Black.
Features
- Item Type: tonneau cover hardware
- Color: Black
- Manufacturer Part Number: 80351
- Mounting Hardware Included: No
- Includes (2) # 80351 C striker plates
- See more on Amazon...
Brand: Camotokiit | Manufacturer: Camotokiit
Warranty: 90 Days
See On Amazon #6
LEER Twist Handle Kit 113436-100XQ, 700, 100XL & Latches 83514/83515
Asin: B0871VMGN5 | Ean: 0643934301609 | UPC: 643934301609
Genuine Leer Twist Lock.
Drivers Side & Passenger Side Striker Latches (83514 / 83515).
Features
- Mounting hardware included (including 2 keys)
- Drivers side & passenger side striker latches (83514 / 83515)
- Genuine Leer twist lock
- See more on Amazon...
Brand: LEER | Manufacturer: Leer
See On Amazon #7
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 38 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B01K1I47J0 | Model: 16”, 38 lbs | PartNumber: 16”, 38 lbs | Ean: 0709832096419 | UPC: 709832096419
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09209 Or Stabilus # 01824. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 38 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 38 Lbs Of Pressure, For A Total Of 76 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 76 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-70 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 38 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 38 lbs of pressure, for a total of 76 lbs of pressure. Please note that this does not mean that it can lift something that is 76 lbs. the typical hinged-style door weight for this prop is approximately 50-70 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09209 or Stabilus # 01824. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches | Weight: 0.75 pounds
See On Amazon #8
2 Truck Upfitters 17" Gas Props (17.1" Extended, 9.9" Compressed, 45 pounds of Pressure ea) for are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B074MF3HMP | Model: 17”, 45 lbs | PartNumber: 17”, 45 lbs | Ean: 0709832096785 | UPC: 709832096785
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04270 Or Stabilus # 1822. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 45 Pound (Each) Gas Struts. 17.1" Extended Length And 9.9" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 45 Lbs Of Pressure, For A Total Of 90 Lbs Of Pressure. Please Note That This Does Not Mean That These Gas Lift Shocks Can Lift Something That Is 90 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approx 60-80 Lbs, Including The Weight Of The Camper Shell Locks & Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 45 pound (each) gas struts. 17.1 extended length and 9.9 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 45 lbs of pressure, for a total of 90 lbs of pressure. Please note that this does not mean that these gas lift shocks can lift something that is 90 lbs. the typical hinged-style door weight for this prop is approx 60-80 lbs, including the weight of the camper shell locks & keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # C16-04270 or Stabilus # 1822. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 1.00 x 18.00 x 2.00 inches | Weight: 0.81 Pounds
See On Amazon #9
LEER FOLDITUP | Fits 2014-2018 GM Chevy Silverado/GMC Sierra 1500 with 5.8 FT Bed | Hard, Quad-Folding, Low Profile Tonneau Cover
Asin: B082FN3JKM | Model: 650120 | PartNumber: 650120 | Ean: 0810059882300, 0812227028787 | UPC: 812227028787, 810059882300
Sleek And Low-Profile Design: Enhance Your Truck's Aesthetics With The Patented Quad-Fold Folditup Hard Folding Cover. Featuring A Sleek, 12Mm Low-Profile Design And Thinner Rails, It Allows For A True Flush Mount On Your Truck Bed. This Design Not Only Looks Great But Also Maximizes Cargo Space Within The Bed..
No-Drill Installation For Quick Setup: Enjoy A Hassle-Free Installation Process With The Quad-Fold Folditup. It Comes Complete With All The Necessary Tools And Comprehensive Instructions, Allowing You To Easily Install Your Tonneau Cover. This Means You Have The Convenience Of Taking Your Cover Off Or Putting It Back On Whenever You Need It, Without The Need For Drilling Or Complicated Setups..
Quad-Fold Flexibility With Lightweight Panels: The Quad-Fold Folditup Offers Unmatched Flexibility With Its Four Lightweight, Durable Panels Constructed From Fiberglass Reinforced Plastic Polymer. When Opened, The Quad-Fold Design Ensures That Your Third Brake Light And Window Remain Visible. Additionally, It Locks Securely Into Position Away From The Cab, Providing Protection For The Back Of Your Cab And Window. With A Remarkable 450 Lbs. Evenly Distributed Load Rating.
Effortless Latching With Cync System: Experience Ease-Of-Use With Leer's Industry-Exclusive Cync Latching System. This Innovative Design Enables You To Effortlessly Open The Quad-Fold Folditup Cover With Just Two Fingers From Either Side Of The Truck Bed. Plus, It Securely Latches With Both Open And Closed Tailgates..
Features
- Perfect Fit for Your GM Chevy Silverado/GMC Sierra 1500: Precision-engineered to fit the 2014-2018 GM Chevy Silverado/GMC Sierra 1500 with a 5.8 FT Bed, ensuring a secure and custom-fit solution for your truck.
- Effortless Latching with CYNC System: Experience ease-of-use with LEER's industry-exclusive CYNC latching system. This innovative design enables you to effortlessly open the Quad-Fold FOLDITUP cover with just two fingers from either side of the truck bed. Plus, it securely latches with both open and closed tailgates.
- Sleek and Low-Profile Design: Enhance your truck's aesthetics with the patented Quad-Fold FOLDITUP Hard Folding Cover. Featuring a sleek, 12MM low-profile design and thinner rails, it allows for a true flush mount on your truck bed. This design not only looks great but also maximizes cargo space within the bed.
- Quad-Fold Flexibility with Lightweight Panels: The Quad-Fold FOLDITUP offers unmatched flexibility with its four lightweight, durable panels constructed from fiberglass reinforced plastic polymer. When opened, the quad-fold design ensures that your third brake light and window remain visible. Additionally, it locks securely into position away from the cab, providing protection for the back of your cab and window. With a remarkable 450 lbs. evenly distributed load rating
- No-Drill Installation for Quick Setup: Enjoy a hassle-free installation process with the Quad-Fold FOLDITUP. It comes complete with all the necessary tools and comprehensive instructions, allowing you to easily install your tonneau cover. This means you have the convenience of taking your cover off or putting it back on whenever you need it, without the need for drilling or complicated setups.
- See more on Amazon...
Brand: LEER | Manufacturer: Leer
Dimensions: 5.70 x 68.00 x 25.00 inches
Warranty: 3 Year Limited Warranty
See On Amazon #10
2 Truck Upfitters 13" Gas Props (13" Extended, 8.1" Compressed, 30 pounds of Pressure ea) for A.R.E, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B01K9DF5RA | Model: 13”, 30 lbs | PartNumber: 13”, 30 lbs | Ean: 0709832096426 | UPC: 709832096426
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-04464 Or C16-04464A Or Stabilus # 0516. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 30 Pound (Each) Gas Struts. 13.0" Extended Length & 8.1" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Windows / Camper Shell Doors. Each Canopy Shock Has 30 Lbs Of Pressure, For A Total Of 60 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 60 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 30-50 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure camper struts from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 30 pound (each) gas struts. 13.0 extended length & 8.1 compressed length. This size of door shock absorber is for tall medium weight rear or side camper windows / camper shell doors. Each canopy shock has 30 lbs of pressure, for a total of 60 lbs of pressure. Please note that this does not mean that it can lift something that is 60 lbs. the typical hinged-style door weight for this prop is approximately 30-50 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-04464 or c16-04464A or Stabilus # 0516. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 13.50 x 0.50 inches | Weight: 0.75 pounds
See On Amazon #11
2 Truck Upfitters 16" Gas Props (15.7" ext, 9.4" Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!
Asin: B07PRZKWY8 | Model: 16”, 55 lbs | PartNumber: 16”, 55 lbs
These Gas Lift Cylinders Do Not Fit All Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Compatible With Suspa # C16-23994 & Compatible With Stabilus # 025657 These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 55 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium/Heavy Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 55 Lbs Of Pressure, For A Total Of 110 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 110 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 70-90 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 55 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Compatible with Suspa # c16-23994 & compatible with Stabilus # 025657 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.70 x 15.70 x 0.70 inches | Weight: 1.00 Pounds
See On Amazon #12
2 Truck Upfitters 12" Gas Props (12.2" Extended, 8.6" Compressed, 24 lbs of Press ea) for are ATC Snugtop Leer Camper Top Side/Windoors. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B01MQRPK6P | Model: 122086-24-10 | PartNumber: 122086-24-10 | Ean: 0709832096631 | UPC: 709832096631
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa #C16-03795 Or Stabilus #1906. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair (2 Total) Of 24 Pound (Each) Gas Struts. 12.2" Extended Length And 8.6" Compressed Length. This Size Of Door Shock Absorber Is For Tall Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 24 Lbs Of Pressure, For A Total Of 48 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 48 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 20-40 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair (2 total) of 24 pound (each) gas struts. 12.2 extended length and 8.6 compressed length. This size of door shock absorber is for tall medium weight rear or side camper shell doors. Each canopy shock has 24 lbs of pressure, for a total of 48 lbs of pressure. Please note that this does not mean that it can lift something that is 48 lbs. the typical hinged-style door weight for this prop is approximately 20-40 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa #C16-03795 or Stabilus #1906. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 2.00 x 12.50 x 0.50 inches | Weight: 0.69 pounds
See On Amazon #13
2 Pcs 18.5 Inch 40lbs/178N Gas Strut Spring Shock for Truck Cap Camper Shell Leer Pickup Lift Supports C1620651 C16-20651
Asin: B09TKPKQF6 | Ean: 0794471923769 | UPC: 794471923769
🟢【 Interchange Part Number 】C1620651 C16-20651 Se187p40 25248 68272 Se187p40s10.
🟢【 Satisfaction Service 】1 Year 100% Satisfactory Warranty, If Unfortunately Our Gas Strut Did Not Work Well ,Please Kindly Contact Us..
🟢【 Application 】Suitable To Use On Leer Camper Rear Window, Leer Cap..
🟢【 Force/Pressure 】 40 Pounds Per Strut. Suitable Support Weight Is From 30 Pounds To 44 Pounds For 2 Struts, Super Strong!!.
Features
- Dimension Extended Length (Center-to-Center): 18.5 In , Compressed Length: 10.7 In
- Force/Pressure 40 Pounds Per Strut. Suitable support weight is from 30 pounds to 44 pounds for 2 STRUTS, Super strong!!
- Interchange Part Number C1620651 C16-20651 SE187P40 25248 68272 SE187P40S10
- Application Suitable to use on leer camper rear window, leer cap.
- Satisfaction Service 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our gas strut did not work well ,please kindly contact us.
- See more on Amazon...
Brand: TadaMark | Manufacturer: TadaMark
Dimensions: 1.00 x 16.00 x 2.00 Inches
See On Amazon #14
2 All Glass Rear Door Hinges with Hardware #103528-100XL/100LE for LEER Truck Cap
Asin: B0CRTVLFZN | Model: 71543 / 53248 / 67158 | PartNumber: 71543 / 53248 / 67158
Attachment Type:Bolts.
Fitment:Fits Most Versions Of Leer Models 100Xl And 100Le.
Other Part Number:71543 / 53248 / 67158.
Package Included:Includes 2 Hinges, 2 Torx Screws, 2 Grommets And 2 Hinge Pads.
Placement On Vehicle:Rear.
Manufacturer Part Number:103528.
Features
- Part Type:Door Hinges
- Manufacturer Part Number:103528
- Attachment Type:Bolts
- Placement on Vehicle:Rear
- Other Part Number:71543 / 53248 / 67158
- Package Included:Includes 2 Hinges, 2 Torx Screws, 2 Grommets And 2 Hinge Pads
- Fitment:Fits Most Versions Of Leer Models 100XL and 100LE
- See more on Amazon...
Brand: Camotokiit | Manufacturer: 103528
Warranty: 90
See On Amazon #15
2 Truck Upfitters 14" Gas Props (13.98" ext, 8.9" comp, 24 lbs ea) for are, Snugtop, Leer, ATC, Century Camper Doors. Measurement Required! Includes 4 Ball mounts!
Asin: B07FJHZK7K | Model: 139089-24-10 | PartNumber: 139089-24-10
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Compatible W/ Suspa #C16-06389 & C16-21682, Stabilus #025647. These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair (2 Total) Of 24 Pound (Each) Gas Struts. 13.9" Extended Length And 8.9" Compressed Length. This Size Of Door Shock Absorber Is For Short Light Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 24 Lbs Of Pressure, For A Total Of 48 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 48 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 25-40 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair (2 total) of 24 pound (each) gas struts. 13.9 extended length and 8.9 compressed length. This size of door shock absorber is for short light weight rear or side camper shell doors. Each canopy shock has 24 lbs of pressure, for a total of 48 lbs of pressure. Please note that this does not mean that it can lift something that is 48 lbs. the typical hinged-style door weight for this prop is approximately 25-40 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Compatible w/ Suspa #C16-06389 & c16-21682, Stabilus #025647. These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 13.89 x 0.50 inches
See On Amazon #16
C16-10788 12" 35Lbs/156N Gas Shock Strut for Leer are Camper Shell Truck Topper Rear Window, Pickup Truck Tool Box Weatherguard Tool Box
Asin: B08RZ5ZZHR | Ean: 0746827167846 | UPC: 746827167846
【Interchange Part Number】1576Ee, 8039Qz, C1610788, C16-10788, Ml1535, Ml15-35, Ml-15-35, Ml3535, Ml35-35, Ml-35-35, Se120p35, Sl1535, Sl15-35, Sl-1535, Sl-15-35, Sl15351, Sl15-35-1, Sl-15351, Sl-15-35-1, Sl15355, Sl15-35-5, Sl-15355, Sl-15-35-5, Sl3535, Sl35-35, Sl-3535, Sl-35-35, Sl35351, Sl35-35-1, Sl-35351, Sl-35-35-1, Sl35355, Sl35-35-5, Sl-35355, Sl-35-35-5..
【12+1 Months Replacement Service】Welcome To Click "Ask Seller" Beside Your Order For In-Time Assistance If Any Problem Occurs..
【Note】Please Confirm The Length Before Ordering. Measure The Distance From The Center Of The Socket To The Center Of The Socket..
【Parameter】 Extended Length: 12.2 Inch Compressed Length: 7.5Inch. Force: 35Lb/156N Per Shock..
Features
- APPLICATION 12in 35lb Gas Shock work for pickup truck Aluminum toolbox, weatherguard toolbox, ARE Leer camper topper side window, and custom project such as RV door, cabinet lid, box lid.
- PARAMETER Extended Length: 12.2 inch Compressed Length: 7.5inch. Force: 35lb/156N per shock.
- Interchange Part Number 1576EE, 8039QZ, C1610788, C16-10788, ML1535, ML15-35, ML-15-35, ML3535, ML35-35, ML-35-35, SE120P35, SL1535, SL15-35, SL-1535, SL-15-35, SL15351, SL15-35-1, SL-15351, SL-15-35-1, SL15355, SL15-35-5, SL-15355, SL-15-35-5, SL3535, SL35-35, SL-3535, SL-35-35, SL35351, SL35-35-1, SL-35351, SL-35-35-1, SL35355, SL35-35-5, SL-35355, SL-35-35-5.
- NOTE Please confirm the length before ordering. Measure the distance from the center of the socket to the center of the socket.
- 12+1 MONTHS REPLACEMENT SERVICE Welcome to Click Ask Seller BESIDE YOUR ORDER for In-time Assistance if any problem occurs.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #17
2 Pcs 83515 & 83514 Truck Cap Rotary Latch Compatible with Leer 100XL, XR, XQ, 180XL 700 tonneau, Driver Side and Passenger Side, Truck Cap Rotary Latch
Asin: B0D3SZT1KP | Model: truck cap rotary latch | PartNumber: truck cap rotary latch | Ean: 0769310913225 | UPC: 769310913225
Excellent Quality: This Rear Door Rotary Latches Is Made Of High-Quality Metal Materials, Anti-Corrosion, High Temperature Resistance, Long Service Life, Rigorous Testing, And Stable Performance..
Customer Service: If You Encounter Problems During Installation, Please Contact Us Immediately. Please Make Sure The Part Is The Correct Part You Need Before Purchasing. We Support 30-Day No-Questions-Asked Refund And 12-Month Warranty..
Great Design: This Hood Rotation Latch Keeps Items Inside Your Truck Safe And Cannot Be Easily Taken Away By Others. Whether You're Working With Your Truck Or Exploring The Great Outdoors, This Twist Handle Kit Ensures Your Roof Is Locked Tightly. The Twist Handle With Cover Can Prevent Rainwater From Entering The Lock And Prevent Dust Or Other Foreign Objects From Entering The Lock And Causing Blockage..
Compatible With: This Truck Cover Twist Lock Is Compatible With Leer 100Xr, 100Xl And 100Xq 180Xl Truck Covers. They Are Also Compatible With Leer 700 Fiberglass Tonneau Covers..
Features
- Part Number: This truck cap rotary latch is part number 83515 for the driver side and 83514 for the passenger side.
- Compatible With: This truck cover twist lock is compatible with Leer 100XR, 100XL and 100XQ 180XL truck covers. They are also compatible with Leer 700 fiberglass tonneau covers.
- Excellent Quality: This rear door rotary latches is made of high-quality metal materials, anti-corrosion, high temperature resistance, long service life, rigorous testing, and stable performance.
- Great Design: This hood rotation latch keeps items inside your truck safe and cannot be easily taken away by others. Whether you're working with your truck or exploring the great outdoors, this twist handle kit ensures your roof is locked tightly. The twist handle with cover can prevent rainwater from entering the lock and prevent dust or other foreign objects from entering the lock and causing blockage.
- Customer Service: If you encounter problems during installation, please contact us immediately. Please make sure the part is the correct part you need before purchasing. We support 30-day no-questions-asked refund and 12-month warranty.
- See more on Amazon...
Brand: QEWHDJQ | Manufacturer: QEWHDJQ
Warranty: 1 year
See On Amazon #18
2 Truck Upfitters 14" Gas Props (13.98" Extended, 8.5" comp, 40 lbs of Press ea) Compatible with are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement Required! Incl 4 Ball mounts!
Asin: B07PPPTW3J | Model: 14”, 40 lbs | PartNumber: 14”, 40 lbs
These Do Not Fit All Truck Caps / Camper Shell Brands / Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. Please See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09461 These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 40 Pound (Each) Gas Struts. 13.98" Extended Length And 8.5" Compressed Length. This Size Of Door Shock Absorber Is For Medium Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 40 Lbs Of Pressure, For A Total Of 80 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 80 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 50-87 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL TOPS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 40 pound (each) gas struts. 13.98 extended length and 8.5 compressed length. This size of door shock absorber is for medium weight rear or side camper shell doors. Each canopy shock has 40 lbs of pressure, for a total of 80 lbs of pressure. Please note that this does not mean that it can lift something that is 80 lbs. the typical hinged-style door weight for this prop is approximately 50-87 lbs, including the weight of the camper shell locks and keys.
- These do not fit all truck caps / camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09461 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.70 x 14.00 x 0.70 inches | Weight: 1.00 pounds
See On Amazon #19
2 Truck Upfitters 16" Gas Props (15.7" Extended, 9.4" Compressed, 28 lbs of Press ea) Compatible with are, ATC, Snugtop, Leer Camper Shell/Truck Cap Rear Door. Measurement REQ'D! Incl 4 Ball mounts!
Asin: B07L43M829 | Model: 16”, 28 lbs | PartNumber: 16”, 28 lbs
These Gas Lift Cylinders Do Not Fit All Truck Cap/Camper Shell Brands/Models. Measure Your Strut From Center Of Socket To Center Of Socket When Fully Opened & Fully Closed To Get Accurate Measurement. See Pictures To Determine How To Measure. Do Not Measure From End To End. Measurement Must Be From The Center Of Plastic Ball Mount On Each End Of The Gas Spring Lift. Measurement Is Important To Ensure They Open Properly And Get A Good Camper Shell Seal Against The Camper Shell Gasket When Closed..
Equivalent To Suspa # C16-09841 These Camper Shell Shocks Are Compatible With Many Truck Canopy Types, Including Leer Truck Cap Parts, Are Truck Topper Parts, Glasstite Parts, Century Parts, Snugtop Replacement Parts Astro Tops, Atc Campers, And Many Other Fiberglass Brands That Utilize Gas Shocks / Gas Springs / Gas Lift Cylinders. Compatible With Many Gas Lift Brands, Including Stabilus, Lift O Mat, And Suspa. These Are Oem Quality And Perfect Fit For Your Topper!.
Comes With Four 10Mm Ball Mounts For Alternate 'Other Than Truck Camper Shell' Applications, Such As In Camper / Canopy Windoors, Rv Doors And Awnings, Boat Hatch Spring Lifts, Gas Struts For Cabinets, Storage Bed Lifts, Toolbox Struts, Etc. These Gas Shock Lift Supports Cannot Be Compressed By Hand. These Gas Props Must Be Installed In The Extended / Open Position. It Is Nearly Impossible To Install Them In The Closed Position. Please Refer To The Install Video For Guidance On How To Install..
Truck Upfitters Pair Of 28 Pound (Each) Gas Struts. 15.7" Extended Length And 9.4" Compressed Length. This Size Of Door Shock Absorber Is For Short & Light Weight Rear Or Side Camper Shell Doors. Each Canopy Shock Has 28 Lbs Of Pressure, For A Total Of 56 Lbs Of Pressure. Please Note That This Does Not Mean That It Can Lift Something That Is 56 Lbs. The Typical Hinged-Style Door Weight For This Prop Is Approximately 30-40 Lbs, Including The Weight Of The Camper Shell Locks And Keys..
Features
- CHECK LENGTHS AND PRESSURE BEFORE ORDERING. THESE DO NOT FIT ALL CANOPY and COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE! Use a measuring tape to measure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation.
- Truck Upfitters Pair of 28 pound (each) gas struts. 15.7 extended length and 9.4 compressed length. This size of door shock absorber is for short & light weight rear or side camper shell doors. Each canopy shock has 28 lbs of pressure, for a total of 56 lbs of pressure. Please note that this does not mean that it can lift something that is 56 lbs. the typical hinged-style door weight for this prop is approximately 30-40 lbs, including the weight of the camper shell locks and keys.
- These gas lift cylinders do not fit all truck cap/camper shell brands/models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. See pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed.
- Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video for guidance on how to install.
- Equivalent to Suspa # c16-09841 These camper shell shocks are compatible with many truck canopy types, including LEER truck cap parts, ARE truck topper parts, Glasstite parts, Century parts, Snugtop replacement parts Astro tops, ATC campers, and many other fiberglass brands that utilize gas shocks / gas springs / gas lift cylinders. Compatible with many gas lift brands, including stabilus, lift o mat, and Suspa. These are OEM quality and perfect fit for your topper!
- See more on Amazon...
Brand: Truck Upfitters | Manufacturer: Truck Upfitters
Dimensions: 0.50 x 16.00 x 0.50 inches
See On Amazon
Looking For Something Else?
Search