QODOLSI 1 PC Car Shark Fin Antenna, No Punching Antenna Hood, Roof Rear Wing Modified Car Radio Signal, Enhance Car Antennas, Roof Antenna Seat, Universal Car Antenna Decoration (Carbon Fiber Black)
Asin: B0C9GL92GZ | Model: QOSYQ01CB-1PCS | PartNumber: QOSYQ01CB-1PCS
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🚓 Excellent Design: Copper Lines And Chips At The Bottom Of The Product, Which Are Hand-Connected, And Are Not Easy To Disconnect. The Product Uses Lacquer Surface, Mirror Surface Reflective, Delicate Workmanship, Uniform, And Improve The Quality Of The Car. The Product Connection Is Bold Copper Line, Pure Copper Screw, And The Signal Is More Stable..
🚓 Easy To Install: First Remove The Shark Fin, And Put The Powerful Double-Sided Glue To The Back Of The Shark Fin (When The Double-Sided Glue Is Not Easy To Tear Off, You Can Use A Fine-Tip Object To Open It), Then Remove The Antenna, Tear Off The Double-Sided Glue. Install The Shark Fin, Twist It With Screws, And Squeeze It Hard After Aligning..
🚓 Universal Fitting: The Product Size Is 6.7 Inches X 3 Inches X 2.5 Inches. The Bottom Arc Size Is 3.9 Inches X 2.4 Inches. There Are Two Colors Of Black And Carbon Fiber Black To Choose From. Suitable For Most Cars..
🚓 Function: This Product Can Be Connected To The Original Car Radio Antenna. It Is Connected To The Thick Pure Copper Wire. The Radio Effect Is Very Good. Using A Curved Bottom, You Can Also Make The External Decoration Of The Car. The Unique Streamlined Shark Fin Design Makes Your Car More Fashionable..
Features
- High-quality Material: This car shark fin antenna is made of ABS plastic. Insulation, corrosion resistance, not easy to rust, moisture-proof, sun protection, and sturdy durability. Even bad weather will not fall.
- Function: This product can be connected to the original car radio antenna. It is connected to the thick pure copper wire. The radio effect is very good. Using a curved bottom, you can also make the external decoration of the car. The unique streamlined shark fin design makes your car more fashionable.
- Excellent Design: Copper lines and chips at the bottom of the product, which are hand-connected, and are not easy to disconnect. The product uses lacquer surface, mirror surface reflective, delicate workmanship, uniform, and improve the quality of the car. The product connection is bold copper line, pure copper screw, and the signal is more stable.
- Universal Fitting: The product size is 6.7 inches x 3 inches x 2.5 inches. The bottom arc size is 3.9 inches x 2.4 inches. There are two colors of black and carbon fiber black to choose from. Suitable for most cars.
- Easy to Install: First remove the shark fin, and put the powerful double-sided glue to the back of the shark fin (when the double-sided glue is not easy to tear off, you can use a fine-tip object to open it), then remove the antenna, tear off the double-sided glue. Install the shark fin, twist it with screws, and squeeze it hard after aligning.
- See more on Amazon...
Brand: QODOLSI | Manufacturer: QODOLSI
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon Similar To QODOLSI 1 PC Car Shark
#1
TOMALL Car Shark Fin Antenna Cover Universal Waterproof Car Radio Base Replacement Accessories Car Decoration Antenna Cover for SUV/Truck/Van (Blue)
Asin: B092Z43WNB | Ean: 0792276105533 | UPC: 792276105533
【Versatility】Suitable For Most Cars With Flat Roof Surfaces. In Appearance, It Forms A Strong Color Impact, Gives People A Bright Feeling, And Immediately Improves The Car's Grade. It Is A Great Decoration. It Is More Cool And Sporty Than The Original Car!.
【Package】Car Shark Fin Antenna Cover (Black)*1, Sticker*1. Note: Please Measure The Size Of The Original Car Antenna Before Purchasing, Otherwise It Will Not Match! The Size Of The Antenna Base Should Be Less Than 3.19" X2.48" (81Mm * 63Mm)..
【Easy To Install】1. Remove The Antenna Of The Original Car And Wipe Clean The Side Position; 2. Take Out The Antenna And Sticker, And Stick The Tape On The Bottom Of The Antenna; 3. Tighten The Screw Of The Antenna With A Tool; 4. Align The Position Directly And Press Firmly. Note: 1. Before Pasting, Please Keep The Installation Location Clean And Dry! 2. After Pasting, Please Do Not Wash The Vehicle Within 72 Hours, In Order To Avoid The Tape Not Sticking And Causing It To Fall Off!.
【Unique Design】1. Baking Paint Technology. Fine Workmanship, Not Easy To Deform. 2. Streamlined Design. Reduce Resistance, Beautiful And Generous. 3. Strong Stickiness. Full Coverage, Not Easy To Fall Off..
Features
- Material Made of high-quality ABS . The bottom surface is equipped with tape, which can be directly pasted without punching, which is simple and convenient.
- Unique Design 1. Baking Paint Technology. Fine workmanship, not easy to deform. 2. Streamlined Design. Reduce resistance, beautiful and generous. 3. Strong Stickiness. Full coverage, not easy to fall off.
- Versatility Suitable for most cars with flat roof surfaces. In appearance, it forms a strong color impact, gives people a bright feeling, and immediately improves the car's grade. It is a great decoration. It is more cool and sporty than the original car!
- Easy to Install 1. Remove the antenna of the original car and wipe clean the side position; 2. Take out the antenna and sticker, and stick the tape on the bottom of the antenna; 3. Tighten the screw of the antenna with a tool; 4. Align the position directly and press firmly. Note: 1. Before pasting, please keep the installation location clean and dry! 2. After pasting, please do not wash the vehicle within 72 hours, in order to avoid the tape not sticking and causing it to fall off!
- Package Car Shark Fin Antenna Cover (Black)*1, Sticker*1. Note: Please measure the size of the original car antenna before purchasing, otherwise it will not match! The size of the antenna base should be less than 3.19 x2.48 (81mm * 63mm).
- See more on Amazon...
Brand: TOMALL | Manufacturer: TOMALL
Dimensions: 2.60 x 6.70 x 2.80 inches
See On Amazon #2
QODOLSI 1 PC Car Shark Fin Antenna Cover, Roof Signal Receiver, Self-Adhesive Antenna Base for Car SUV Truck Van
Asin: B0BXGXTN6C | Model: QOSYQ03CB | PartNumber: QOSYQ03CB
🚓 Enhanced Signal: Car Shark Fin Shaped Antenna Not Only For The Signal Function, The Signal Is Stable And Strong. But Also For Decoration Of Your Car Roof..
🚓 Easy Installation: Self-Adhesive Installation, No Drilling Required, Just Clean And Dry Your Car, Stick The Antenna Fin On The Surface. The Back Of The Product Is Equipped With Double-Sided Tape, Which Is Easy To Install And Does Not Hurt The Car..
🚓 Size Detail: This Shark Fin Antenna Size Is 16Cm*7.8Cm*7Cm/6.29Inch*3Inch*2.75Inch. Fit For Most Cars Having A Slightly Curved Or Flat Roof Surface To Install The Shark Fin Antenna. Please Allow 0.5-1Cm Deviation Due To Manual Measurement..
🚓 Fashionable Decoration: The Antenna Topper Cover Is More Beautiful And Fashionable, And Immediately Improves The Grade Of Your Car. Cooler And Sportier Than The Original Car, The Unique Stream Lined Shark Fin Design Make It More Beautiful For Your Vehicle..
Features
- Durable Material: The car topper antenna covers are all made of high-quality ABS plastic material with professional-grade paint treatment, the shark fin antenna is solid and durable, with a built-in pure copper antenna and chip.
- Fashionable Decoration: The antenna topper cover is more beautiful and fashionable, and immediately improves the grade of your car. Cooler and sportier than the original car, the unique stream lined shark fin design make it more beautiful for your vehicle.
- Enhanced Signal: Car shark fin shaped antenna not only for the signal function, the signal is stable and strong. But also for decoration of your car roof.
- Size Detail: This shark fin antenna size is 16cm*7.8cm*7cm/6.29inch*3inch*2.75inch. Fit for most cars having a slightly curved or flat roof surface to install the shark fin antenna. Please allow 0.5-1cm deviation due to manual measurement.
- Easy Installation: Self-adhesive installation, no drilling required, just clean and dry your car, stick the antenna fin on the surface. The back of the product is equipped with double-sided tape, which is easy to install and does not hurt the car.
- See more on Amazon...
Brand: QODOLSI | Manufacturer: QODOLSI
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon #3
AntennaMastsRus - Functional Black Shark Fin Antenna is Compatible with Kia Sorento (2010-2018)
Asin: B01N6DI2WW
Size: Length: 6.75", Width: 3.75".
3M Adhesive Tape.
Features
- Fits: 2010-2018 Kia Sorento (Will not fix factory broken shark fins)
- 3M Adhesive Tape
- Size: Length: 6.75, Width: 3.75
- See more on Amazon...
Brand: AntennaMastsRus | Manufacturer: AntennaMastsRus
Weight: 0.50 Pounds
Warranty: 1 Year Replacement Warranty
See On Amazon #4
QODOLSI 10 PCS Diffuser Shark Fin Kit, Car Roof Shark Fins Spoiler Wing Splitter, Stick-on Spoiler Roof Air Vortex Aerial Decorative, for Car Truck SUV (Carbon Fiber Black #101)
Asin: B0BXGZCTVD | Model: QOSYQ101CB-10PC | PartNumber: QOSYQ101CB-10PC
🚓 Self-Adhesive Design: 10 Shark Fin Antennas Are Well Curved To Fit The Original Appearance. Self-Adhesive With The Car, Strong And Not Easy To Fall Off, Very Stable Even In Bad Weather Conditions..
🚓 Easy To Install: Use Of Bottom Adhesive Directly Stick ,Need Proper Measurement To Get Them Perfectly Aligned. When Installing, Use A Hair Dryer To Heat It For 1 Minute For Better Viscosity. Universal Fit For Most Cars, No Need For Modification Or Trimming..
🚓 Drag Reduction Noise Reduction: Reduce Air Resistance And Air Noise, Effectively Reduce The Body's Adhesion Dust, Dirt, And Reduce Noise, Improve The Stability Of The Vehicle During Fast Driving..
🚓 High Quality Material: Made Of Good-Quality Abs Plastic, Uv Protected And Weatherproof, These Shark Fin Spoiler Designed To Increase A Vehicle's Aerodynamic Performance..
Features
- Stylish Design: Fashionable shark fin design, it is also a decorative item for your vehicle. Carbon fiber/black smooth and shiny surface makes your car more dazzling and different and stand out.
- High Quality Material: Made of good-quality ABS plastic, UV protected and weatherproof, these shark fin spoiler designed to increase a vehicle's aerodynamic performance.
- Self-adhesive Design: 10 shark fin antennas are well curved to fit the original appearance. Self-adhesive with the car, strong and not easy to fall off, very stable even in bad weather conditions.
- Drag Reduction Noise Reduction: Reduce air resistance and air noise, effectively reduce the body's adhesion dust, dirt, and reduce noise, improve the stability of the vehicle during fast driving.
- Easy to Install: Use of bottom adhesive directly stick ,need proper measurement to get them perfectly aligned. When installing, use a hair dryer to heat it for 1 minute for better viscosity. Universal fit for most cars, no need for modification or trimming.
- See more on Amazon...
Brand: QODOLSI | Manufacturer: QODOLSI
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon
Looking For Something Else?
Search