DAIERTEK 12v Bus Bar 150A Small Battery Power Distribution Block 12 Volt Positive & Negative Terminal Block Busbar 2 x 1/4" Terminal Studs 5 x #8 Terminal Screws with Cover for Marine Automotive Car
Asin: B0CC1H1963 | Model: BB100-T2M6S5-C-RB | PartNumber: BB100-T2M6S5-C-RB
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Material: The Battery Terminal Distribution Block Contact Is Nickel Plated Copper Which Has Strong Conductivity, High Temperature Resistance, And Corrosion Resistance. The Terminal Studs And Screws Of This Copper Bus Bar Are Made Of Stainless Steel..
Application: The Automotive Power Distribution Block Widely Work In Many Environment Such As Marine, Car, Trailer, Rv, Motorcycle, Truck, Ship, Ect..
Packing: 1 X Positive Distribution Block (Red One), 1 X Ground Distribution Block (Black One), 2 X M6 (1/4") Terminal Studs And 5 X M4 (#8) Terminal Screws..
Cover: The Bus Bar Terminal Block 12V Holds Transparent Polycarbonate Cover, Which Can Prevent Short Circuits Caused By Accidental Contact..
Features
- Parameters: The max voltage of the positive & negative bus bar is 300V AC/48V DC. Continuous Rating: 130A AC/150A DC. This power distribution block includes 2 x M6 Terminal Studs 5 x M4 Terminal Screws.
- Cover: The bus bar terminal block 12v holds transparent polycarbonate cover, which can prevent short circuits caused by accidental contact.
- Material: The battery terminal distribution block contact is nickel plated copper which has strong conductivity, high temperature resistance, and corrosion resistance. The terminal studs and screws of this copper bus bar are made of stainless steel.
- Packing: 1 x Positive distribution block (red one), 1 x ground distribution block (black one), 2 x M6 (1/4) Terminal Studs and 5 x M4 (#8) Terminal Screws.
- Application: The automotive power distribution block widely work in many environment such as marine, car, trailer, RV, motorcycle, truck, ship, ect.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DaierTek
See On Amazon Similar To DAIERTEK 12v Bus Bar 150A
#1
Mofeez Power Distribution Block Bus Bar, 4 x 3/8" Posts, 6 x #8 Screws Terminals, Max 48V 250A (Pair, Red & Black)
Asin: B09J24J338 | Model: 98MF18044 | PartNumber: 98MF18044 | Ean: 0742484179413, 0653461673018 | UPC: 742484179413, 653461673018
Built For Safe --- Nickle Plated Brass Busbar Plates Offer Low Resistance, Maximum Conductivity, And Corrosion Protection. The Nylon Nuts Connect To Two External Studs To Prevent Accidental Short Circuits. A Removable Nylon Cover Keeps Metal Components From Making Contact With Anything. The Insulated Nylon Base Is Flame-Retardant..
Wide Applications --- Mofeez Bus Bar Is An Excellent Circuit Collection Wire Harness In The Car, Rv, Yacht, Caravan, And Ship Power System. The Busbar Holds Wide Cables Securely To Keep The Wires Neat..
Distribute Power More Efficiently --- Provides Several Large Gauge Connections For Running A Dedicated Ground To The Battery And Offers More Minor Gauge Connections For Lower Voltage..
Operating Voltage/Amperage Range --- Max Voltage: 48Vdc. Max Continuous Amperage: 250A For The Entire Connection. Maximum Intermittent: 20A For Each Connection (Less Than 1 Minute). So Whether Your Working On A Boat, A Car, Or An Rv, We've Got You Covered..
Features
- Basic Parameters --- 6*#8 stainless steel terminal screws, 4*3/8" studs. The dimensions: 6.7"Lx1.3"Wx2.1H".
- Operating Voltage/Amperage range --- Max voltage: 48VDC. Max continuous amperage: 250A for the entire connection. Maximum intermittent: 20A for each connection (less than 1 minute). So whether your working on a boat, a car, or an RV, we've got you covered.
- Built for Safe --- Nickle plated brass busbar plates offer low resistance, maximum conductivity, and corrosion protection. The nylon nuts connect to two external studs to prevent accidental short circuits. A removable Nylon cover keeps metal components from making contact with anything. The insulated nylon base is flame-retardant.
- Distribute Power More Efficiently --- Provides several large gauge connections for running a dedicated ground to the battery and offers more minor gauge connections for lower voltage.
- Wide Applications --- Mofeez bus bar is an excellent circuit collection wire Harness in the car, RV, yacht, caravan, and ship power system. The busbar holds wide cables securely to keep the wires neat.
- See more on Amazon...
Brand: MOFEEZ | Manufacturer: Mofeez
Dimensions: 3.00 x 8.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #2
Joinfworld 5/16" Bus Bar 12V 200A Battery Wire Power Distribution Terminal Block M8 Dual Studs Junction Block Post Positive&Negative Busbar for Auto Car Marine Boat
Asin: B09TGSB55R | Ean: 0717664070569 | UPC: 717664070569
Junction Block: This Battery Terminal Distribution Block Will Come With A Removable Junction Block, You Can Decide If To Remove It According To Your Own Need..
Application: The Bus Bar Terminal Block Will Come In Pairs - 1 X Positive Distribution Block And 1 X Ground Distribution Block, And The Package Will Include 4 Screws To Make Your Installation Quicker And More Convenient. Suitable For Auto, Car ,Truck, Marine, Boat, Etc..
Stainless Steel: This 12V Distribution Block With Stainless Steel Studs, Which Have Better Performance In Corrosion Resistance Comparing With Other 12V Bus Bar, Makes The Battery Bus Bar Safer And More Reliable While Being Used On Marine Boats..
Rating: Can Be Used With 12V, 24V And Max 48V. The Max Continuous Amperage Is 200 Amp..
Features
- Power Distribution Block: Positive bus bar and ground bus bar, red and black battery distribution block. Dual terminal M8 studs (5/16" studs) marine bus bar.
- Rating: Can be used with 12V, 24V and max 48V. The max continuous amperage is 200 amp.
- Junction Block: This battery terminal distribution block will come with a removable junction block, you can decide if to remove it according to your own need.
- Stainless Steel: This 12v distribution block with stainless steel Studs, which have better performance in corrosion resistance comparing with other 12v bus bar, makes the battery bus bar safer and more reliable while being used on marine boats.
- Application: The bus bar terminal block will come in pairs - 1 x positive distribution block and 1 x ground distribution block, and the package will include 4 screws to make your installation quicker and more convenient. Suitable for auto, car ,truck, marine, boat, etc.
- See more on Amazon...
Brand: Joinfworld | Manufacturer: Joinfworld
See On Amazon #3
Joinfworld Power Distribution Block 12V Bus Bar 250A 5/16" Stud Marine Bus Bar Terminal Block 12 Volt DC Battery Busbar with Cover - Negative&Positive
Asin: B0CTBKQJQ3 | Model: BB250-T3M8S10-C-RB-2 | PartNumber: BB250-T3M8S10-C-RB-2
【What You Get】 - A Pair Of 12V Power Distribution Block, Includes A Positive Power Distribution Block And A Negative Power Distribution Block, 4 X Mounting Screws, 2 X 1Awg 5/16" Copper Lugs, 4 X 6Awg 5/16" Copper Lugs, 20 X Terminals..
【Wide Application】 - The 12 Volt Bus Bar With Cover Aims To Make The Wiring Of Circuit Become Neat And Tidy, Preventing Mess Harness From Causing Electric Short Circuit, Suitable For Automotive, Car, Truck, Marine, Boat, Solar Wiring..
【Protect Cover & Nuts】 - Each Power Bus Bar Will Come With A Protect Cover And Two Nuts, Which Helps To Shelter As Much Exposed Area As Possible To Reudeces The Risks Of Accidental Contact And Prevent Short Circuit, Makes The Circuit Safer..
【5/16" Stud】 - The Battery Bus Bar Terminal Block Includes 3 X 5/16"(M8) Studs And 10 X #8 Screw Terminals, Which Makes The 12V Bus Bar Be Able To Accept Large Size Terminal Connectors And Wires..
Features
- Rating - The battery distribution block rated 250A when work in 12v supplier circuit, and the battery terminal block can handle MAX 48v source power.
- 5/16 Stud - The battery bus bar terminal block includes 3 x 5/16(M8) studs and 10 x #8 screw terminals, which makes the 12v bus bar be able to accept large size terminal connectors and wires.
- What You Get - A pair of 12v power distribution block, includes a positive power distribution block and a negative power distribution block, 4 x Mounting Screws, 2 x 1AWG 5/16 Copper Lugs, 4 x 6AWG 5/16 Copper Lugs, 20 x Terminals.
- Protect Cover & Nuts - Each power bus bar will come with a protect cover and two nuts, which helps to shelter as much exposed area as possible to reudeces the risks of accidental contact and prevent short circuit, makes the circuit safer.
- Wide Application - The 12 volt bus bar with cover aims to make the wiring of circuit become neat and tidy, preventing mess harness from causing electric short circuit, suitable for automotive, car, truck, marine, boat, solar wiring.
- See more on Amazon...
Brand: Joinfworld | Manufacturer: Joinfworld
See On Amazon #4
DaierTek 12V Bus Bar 6 x 5/16" (M8) Terminal Studs 12 Volt Power Distribution Block with Cover Battery Bus Bar 12V - 48V Positive & Negative for Automotive Car Boat Solar System
Asin: B0B12HJWTW | Ean: 0717664070668 | UPC: 717664070668
【Round Corner Base】 - The 12 Volt Bus Bar Is Unique Round Corner Base Design, Which Makes The Battery Terminal Block Unique And Special, Looks More Extraordinary Compared With Other Busbars..
【Application】 - This Marine Power Distribution Block Uses Copper Plates And Stainless Steel Terminals As Conductors, Which Enables The Battery Distribution Block To Work In Extreme Environment, Suitable For Automotive, Car, Marine, Boat, Etc..
【More Open Area Design Cover】 - The Cover Of This 12V Power Block Will Allow 180° Wire Lug Installation And Can Meet Variety Kinds Of Installat Methods Of End Terminals..
【Terminals & Rating】- Each 12V Power Distribution Block Includes - 6 X M8 (5/16") Terminal Studs. This Battery Distribution Block Can Handle Voltage @ Max 300V Ac, 48V Dc, And Continous Amperage @ Max 130A Ac, 150A Dc..
Features
- Product Name - Battery bus bar terminal block, these busbars will come in pairs, include one positive bus bar (red one) and one negative bus bar (black one).
- Terminals & Rating - Each 12v power distribution block includes - 6 x M8 (5/16) terminal studs. This battery distribution block can handle voltage @ Max 300V AC, 48V DC, and continous amperage @ Max 130A AC, 150A DC.
- Round Corner Base - The 12 volt bus bar is unique round corner base design, which makes the battery terminal block unique and special, looks more extraordinary compared with other busbars.
- More Open Area Design Cover - The cover of this 12v power block will allow 180 wire lug installation and can meet variety kinds of installat methods of end terminals.
- Application - This marine power distribution block uses copper plates and stainless steel terminals as conductors, which enables the battery distribution block to work in extreme environment, suitable for automotive, car, marine, boat, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DAIERTEK
See On Amazon #5
DAIERTEK 300A Bus Bar 12V Marine 12V Power Distribution Block with Cover 6 x 3/8" (M10) Terminal Studs Max 300V AC 48V DC Positive & Ground Busbar for Automotive Car Boat
Asin: B0BBZDTHWH | Model: BB300-T6M10-C-BR | PartNumber: BB300-T6M10-C-BR
【Round Corner Base】 - This 12V Bus Bar Is Unique Round Corner Base Design, Which Makes The Marine Bus Bar Unique And Special, Looks More Extraordinary Compared With Others..
【Application】 - This 300A Bus Bar Will Have Better Performance In High Current Systems. The Package Includes One Positive And One Ground Distribution Block, Suitable For Automotive, Car, Marine Boat, Etc..
【Special Design Cover】 - The Exposed Area Of Two Side Of This 12V Power Distribution Block Cover Allows 180° Wire Lug Installation, Can Meet A Variety Kinds Of Install Methods Of End Terminals..
【300A M10 Stud Busbar】- This Battery Distribution Block Can Handle Max 300A Continuous Amperage At Max 300V Ac Or 48V Dc Voltage. Each Battery Terminal Block Includes - 6 X M10 (3/8")Terminal Studs..
Features
- Product Name - Bus bar terminal block 12v, these battery bus bar 12v will come in pairs, includes one positive bus bar (red) and one ground bus bar (black).
- 300A M10 Stud Busbar - This battery distribution block can handle max 300A continuous amperage at Max 300V AC or 48V DC voltage. Each battery terminal block includes - 6 x M10 (3/8)terminal studs.
- Round Corner Base - This 12v bus bar is unique round corner base design, which makes the marine bus bar unique and special, looks more extraordinary compared with others.
- Special Design Cover - The exposed area of two side of this 12v power distribution block cover allows 180 wire lug installation, can meet a variety kinds of install methods of end terminals.
- Application - This 300A bus bar will have better performance in high current systems. The package includes one positive and one ground distribution block, suitable for automotive, car, marine boat, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DAIERTEK
See On Amazon #6
maierke 250A Bus Bar 12V Marine 6 x 5/16" (M8) Terminal Studs 12V-48V Power Distribution Block with Cover,with 6PCS Battery Lugs and 6PCS Heat Shrink Tubing Busbar for Boat Automotive Car
Asin: B0CKYRBQSV
【Special Design】Maierke Power Distribution Block Exposed Sides Allow 180° Wire Lug Installation, Used With The Terminal Parts In The Kit, The Wiring Connect Is Very Convenient And Fast..
【Package Contains】 1Pc 6 X 5/16" (M8) Red Battery Bus Bar, 1Pc 6 X 5/16" (M8) Black Battery Bus Bar, 6Pcs Battery Lugs And 6Pcs Heat Shrink Tubing Busbar..
【Widely Used】Maierke Bus Bar Is Widely Used In Marine, Cars, Trucks, Yachts,Ships, And So On..
【Product Parameters】 Maximum Working Voltage: 300V Ac Or 48V Dc；Maximum Current: 250A..
Features
- Excellent Material maierke bus bar conductor is composed of brass base plate and stainless steel screw terminal,good conductivity and corrosion resistance.The high-density plastic base and PC materials transparent protective shell,elegant and durable.
- Product Parameters Maximum working voltage: 300V AC or 48V DC maximum current: 250A.
- Special Design maierke power distribution block exposed sides allow 180 wire lug installation, used with the terminal parts in the kit, the wiring connect is very convenient and fast.
- Widely Used maierke bus bar is widely used in marine, cars, trucks, yachts,ships, and so on.
- Package Contains 1PC 6 x 5/16 (M8) red battery bus bar, 1PC 6 x 5/16 (M8) black battery bus bar, 6PCS battery lugs and 6PCS heat shrink tubing busbar.
- See more on Amazon...
Brand: maierke | Manufacturer: maierke
See On Amazon #7
DAIERTEK Power Distribution Block with Cover Mini 5 x 1/4" Studs Bus Bar Terminal Block Max 150A 48V DC 300V AC Positive & Negative for Automotive Car Marine
Asin: B0CC1DV4V4 | Model: BB100-T5M6-C-RB | PartNumber: BB100-T5M6-C-RB
Rating & Dimension - Maximum Current: 150A Dc, 130A Ac. Maximum Voltage: 48V Dc, 300V Ac. The Overall Dimension Of This Small Bus Bar Is 4.2In X 0.9In X 1.1In..
Package Included - A Pair Of 12V Battery Bus Bars With Covers: A Red Positive Bus Bar And A Black Ground Bus Bar, Two Sets Of Mounting Screws And Each Of Bus Bar With 5 Terminal Posts..
Wide Applied Range - The 12V Power Distribution Block With Cover Helps To Protect More Exposed Areas And Prevent Accidental Short Circuit, Of Course The Busbar Helps To Wire Neatly And Prevent Electrical Short Circuit Caused By Messing Wiring Harness. The Battery Bus Bar Can Widely Used In Automotive, Cars, Trucks, Rvs, Motorhomes, Motorcycles, Marine, Boats, Ships And So On..
1/4" Stud Terminal - The Battery Bus Bar Terminal Block With 5 X 1/4" (M6) Studs Terminal, Which Makes The 12V Busbar Able To Accept A Wide Range Size Terminal Connectors And Wires Install. And The Washer Design Nuts Also Makes The Contact Of Nut, Wire Lug And The Terminal Block Closer, Which Will Be Much Easier To Tighten And Safer To Use..
Features
- Durable & Sturdy - The base of the bus bar is made of nylon, which is heat resistant and durable. Also the stainless steel stud terminals are resistant to corrosion, and the nickel plated copper plate also makes the marine bus bar have high conductivity and superior corrosion resistant performance, effectively enhances the lifecycle of the bus bar.
- 1/4 Stud Terminal - The battery bus bar terminal block with 5 x 1/4 (M6) studs terminal, which makes the 12V busbar able to accept a wide range size terminal connectors and wires install. And the washer design nuts also makes the contact of nut, wire lug and the terminal block closer, which will be much easier to tighten and safer to use.
- Rating & Dimension - Maximum current: 150A DC, 130A AC. Maximum voltage: 48V DC, 300V AC. The overall dimension of this small bus bar is 4.2in x 0.9in x 1.1in.
- Wide Applied Range - The 12V power distribution block with cover helps to protect more exposed areas and prevent accidental short circuit, of course the busbar helps to wire neatly and prevent electrical short circuit caused by messing wiring harness. The battery bus bar can widely used in automotive, cars, trucks, RVs, motorhomes, motorcycles, marine, boats, ships and so on.
- Package Included - A pair of 12V battery bus bars with covers: A red positive bus bar and a black ground bus bar, two sets of mounting screws and each of bus bar with 5 terminal posts.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DaierTek
Dimensions: 1.10 x 4.20 x 4.20 Inches | Weight: 0.40 Pounds
See On Amazon #8
Seamaka 250A 12V Bus Bar Marine 12V - 48V Power Distribution Terminal Block with Cover with 6 x 5/16 (M8) Post,Battery Bus Bar with 6PCS Battery Lugs and 6PCS Heat Shrink Tubing for Car Boat Marine
Asin: B0CR9ZYK6P
★ Parameters ★ - Maximum Voltage: 300 Volts Ac, 48 Volts Dc, Maximum Current: 250A.
.
★ Packing ★ - A Red 6 X 5/16" (M8) Battery Bus Bar, A Black 6 X 5/16" (M8) Battery Bus Bar, 6 Battery Tabs And 6 Heat Shrinkable Tube Bus Bars.
.
★ Scope Of Application ★ - Suitable For Automobiles, Automobiles, Trucks, Ships, Boats, Yachts, Etc.
.
★ Product Features ★ - 180-Wire Lugs Are Allowed To Be Installed On The Exposed Side Of The Power Supply Terminal Board, Which Is Used In Conjunction With The Terminal Parts In The Kit. The Wiring Is Convenient And Quick, And Meets Various Installation Methods.
.
Features
Material - Bus conductor is composed of brass bottom plate and stainless steel screw terminal, which has low resistance, conductivity and corrosion resistance; The base is made of hard plastic, and the protective sleeve is made of PC to prevent accidental electrical short circuit.
Product features - 180-wire lugs are allowed to be installed on the exposed side of the power supply terminal board, which is used in conjunction with the terminal parts in the kit. The wiring is convenient and quick, and meets various installation methods.
Parameters - Maximum voltage: 300 volts AC, 48 volts DC, Maximum current: 250A.
Scope of application - Suitable for automobiles, automobiles, trucks, ships, boats, yachts, etc.
Packing - A red 6 x 5/16 (M8) battery bus bar, a black 6 x 5/16 (M8) battery bus bar, 6 battery tabs and 6 heat shrinkable tube bus bars.
- See more on Amazon...
Brand: Seamaka | Manufacturer: Seamaka
See On Amazon #9
Young Dance Universal 4 Post 5/16" Power Distribution Block, (M8) Marine Busbar, 250 Amp Rating, 12v Bus Bar Terminal Block for Marine, Automotive and Solar Wiring(1 Set with Protective Cover)
Asin: B0C1Z11YHY
✅【Safe Electricity Preferred】 Nickel-Plated Busbar Plates Provide Low Resistance, Maximum Conductivity And Corrosion Resistance. Nylon Nuts Are Attached To Two External Studs To Prevent Accidental Short Circuits. Removable Nylon Cover Keeps Metal Parts From Coming In Contact With Anything. The Insulated Nylon Base Is Flame Retardant. These Are Essential Products For Safe Electricity Use And Are Worth Buying..
✅【Product Information】3*#8 Stainless Steel Terminal Screw, 4*5/16" Bolt ,Size: 6.5 "Lx1.34 "Wx1.87 "H.
✅【Operating Voltage/Current Range 】This 12V Terminal Block Withstands A Maximum Voltage: 48Vdc. Maximum Continuous Amperage: 250A For The Entire Connection. Maximum Intermittency: 20A Per Connection (Less Than 1 Minute). So Whether You Are Working On A Boat, In A Car Or In An Rv, We Have You Covered..
✅【More Efficient Distribution Of Power】Provides Several Large Gauge Connections For Running A Dedicated Ground To The Battery And More Small Gauge Connections For Lower Voltages. Each Busbar Terminal Block Includes A Cover To Protect The Connection From Damage And Corrosion..
Features
- Wide range of applications Our 250 AMP 5/16" 4-post distribution block busbar is ideal for automotive, car audio, solar and marine use. Whether you need to consolidate, distribute or protect your electrical system, our busbars are an excellent choice for managing wires and distributing power.
- More efficient distribution of power Provides several large gauge connections for running a dedicated ground to the battery and more small gauge connections for lower voltages. Each busbar terminal block includes a cover to protect the connection from damage and corrosion.
- Safe Electricity Preferred Nickel-plated busbar plates provide low resistance, maximum conductivity and corrosion resistance. Nylon nuts are attached to two external studs to prevent accidental short circuits. Removable nylon cover keeps metal parts from coming in contact with anything. The insulated nylon base is flame retardant. These are essential products for safe electricity use and are worth buying.
- Operating Voltage/Current Range This 12V terminal block withstands a maximum voltage: 48VDC. maximum continuous amperage: 250A for the entire connection. maximum intermittency: 20A per connection (less than 1 minute). So whether you are working on a boat, in a car or in an RV, we have you covered.
- Product Information 3*#8 stainless steel terminal screw, 4*5/16 bolt ,Size: 6.5 Lx1.34 Wx1.87 H
- See more on Amazon...
Brand: Young Dance | Manufacturer: Young Dance
Dimensions: 1.87 x 6.50 x 1.34 Inches
See On Amazon #10
250A 12V Bus Bar Marine 12V,Power Distribution Block with Cover with 4 x 3/8 Post 3 x #8 Screws Terminals,Battery Bus Bar with 4PCS Battery Lugs and 4PCS Heat Shrink Tubing for Car Boat Solar Wiring
Asin: B0CXPNHBHM
【 Parameter 】-Maximum Voltage: 300V Ac, 48V Dc, And Maximum Current: 250A..
【 Packaging 】-One Red Terminal: 4 X 3/8 Inch (M10) With Screws: 3 X #8 Battery Bus Bar, One Black Terminal: 4 X 3/8 Inch (M10) With Screws: 3 X #8 Battery Bus Bar, Four Battery Connectors, Four Heat Shrinkable Tube Bus Bars And Six Terminals..
【 Scope Of Application 】-Using Battery Bus Bars For Wire Management And Wiring Can Make Circuit Wiring Neat And Prevent Electrical Short Circuit. Widely Used In Automobiles, Automobiles, Trucks, Ships, Boats, Yachts, Etc..
【 Product Features 】-The Bus Bar Is Fashionable And Can Distribute Power More Effectively. Large-Scale Connection Is Used For Battery-Specific Grounding, And Small-Scale Connection Is Used For Low Voltage. The Bus Bar And The Base Are Fixed By M10 Column, Which Can Bear Large Torque. The Bus Bar Is Very Firm And Will Not Fall Off, And The Bus Bar Will Not Shake When The Nut Is Unscrewed. The Exposed Areas On Both Sides Allow 180 Installation..
Features
- Material -The bus bar is composed of brass bottom plate and 304 stainless steel screw terminals. The 3mm copper bar is thicker than other 2.0mm brass bus bars, and can bear the actual current of 250A. The current is safe and stable, with low resistance and conductivity. Compared with other iron terminals of bus bars, it is not easy to rust. The protective sleeve and base are made of nylon, which is flame retardant to prevent accidental electrical short circuit and make the circuit safer.
- Product features -The bus bar is fashionable and can distribute power more effectively. Large-scale connection is used for battery-specific grounding, and small-scale connection is used for low voltage. The bus bar and the base are fixed by M10 column, which can bear large torque. The bus bar is very firm and will not fall off, and the bus bar will not shake when the nut is unscrewed. The exposed areas on both sides allow 180 installation.
- Parameter -Maximum voltage: 300V AC, 48V DC, and maximum current: 250A.
- Scope of application -Using battery bus bars for wire management and wiring can make circuit wiring neat and prevent electrical short circuit. Widely used in automobiles, automobiles, trucks, ships, boats, yachts, etc.
- Packaging -One red terminal: 4 x 3/8 inch (M10) with screws: 3 x #8 battery bus bar, one black terminal: 4 x 3/8 inch (M10) with screws: 3 x #8 battery bus bar, four battery connectors, four heat shrinkable tube bus bars and six terminals.
- See more on Amazon...
Brand: Seamaka | Manufacturer: Seamaka
See On Amazon #11
Aienxn 12V Bus Bar Marine 6 x 1/4" (M6) Terminal Studs 12V Power Distribution Block with Cover and Ring Terminals,300V AC 48V DC Positive&Negative Battery Bus Bar for Car and Boat (Black+Red) Q-O-078
Asin: B0C4T5MG2D
Wide Application: The Power Distribution Block Uses Copper Plates And Stainless Steel Terminals As Conductors, Which Enables The Battery Distribution Block To Work In Extreme Environment, Suitable For Automotive, Marine, Boat, Car, Etc..
This Battery Distribution Block Can Handle Voltage Max 300V Ac, 48V Dc, And Continous Amperage Max 130A Ac, 150A Dc. If You Have Any Questions, Please Contact Us By Email And We Will Reply You Within 24 Hours..
Package Include: Each Battery Bus Bar 12V Includes Two Power Bus Bars In The Package - One Positive Bus Bar And One Ground Bus Bar..
Features: Aienxn 12V Battery Bus Bar Includes 6 X M6 (1/4 ") Terminals, And Its Nuts Are Designed As Washers..
Features
- Premium Quality: Aienxn battery bus bar base is made of hard plastic, the circuit board is made of copper, stainless steel terminal, PC protective sleeve.
- Features: Aienxn 12v battery bus bar includes 6 x M6 (1/4 ) terminals, and its nuts are designed as washers.
- Wide Application: The power distribution block uses copper plates and stainless steel terminals as conductors, which enables the battery distribution block to work in extreme environment, suitable for automotive, marine, boat, car, etc.
- Package Include: Each battery bus bar 12v includes two power bus bars in the package - one positive bus bar and one ground bus bar.
- This battery distribution block can handle voltage Max 300V AC, 48V DC, and continous amperage Max 130A AC, 150A DC. If you have any questions, please contact us by email and we will reply you within 24 hours.
- See more on Amazon...
Brand: Aienxn | Manufacturer: Aienxn
See On Amazon #12
MOFEEZ Power Distribution Block Bus Bar, 6 x 5/16" Posts, 10 x #8 Screws Terminals, Max 48V 250A (Pair, Red & Black)
Asin: B0C7QRS5VT
Built For Safe ---Nickle Plated Brass Busbar Plates Offer Low Resistance, Maximum Conductivity, And Corrosion Protection. The Nylon Nuts Connect To Two External Studs To Prevent Accidental Short Circuits. Pc Frosted Semi-Transparent Protective Cover And The Insulated Nylon Base Keeps Metal Components From Flaming By Incident..
Wide Applications --- Mofeez Bus Bar Power Distribution Block Uses Copper Plates And Stainless-Steel Terminals As Conductors, Which Enables The Battery Distribution Block To Work In Extreme Environment, Suitable For Car, Rv, Yacht, Caravan, And Ship Power System..
Distribute Power More Efficiently --- Provides Several Large Gauge Connections For Running A Dedicated Ground To The Battery And Offers More Minor Gauge Connections For Lower Voltage. These Power Distribution Blocks Could Finally Organize Your Wiring..
Operating Voltage/Amperage Range --- Max Voltage: 48Vdc. Max Continuous Amperage: 250A For The Entire Connection. Maximum Intermittent: 20A For Each Connection (Less Than 1 Minute). So, Whether You're Working On A Boat, A Car, Or An Rv, We've Got You Covered..
Features
- Basic Parameters --- 10*#8 stainless steel terminal screws, 6*5/16" studs. The dimensions: 9.7"Lx1.4"Wx2.1H".
- Operating Voltage/Amperage range --- Max voltage: 48VDC. Max continuous amperage: 250A for the entire connection. Maximum intermittent: 20A for each connection (less than 1 minute). So, whether you're working on a boat, a car, or an RV, we've got you covered.
- Built for Safe ---Nickle plated brass busbar plates offer low resistance, maximum conductivity, and corrosion protection. The nylon nuts connect to two external studs to prevent accidental short circuits. PC frosted semi-transparent protective cover and the insulated nylon base keeps metal components from flaming by incident.
- Distribute Power More Efficiently --- Provides several large gauge connections for running a dedicated ground to the battery and offers more minor gauge connections for lower voltage. These power distribution blocks could finally organize your wiring.
- Wide Applications --- Mofeez bus bar power distribution block uses copper plates and stainless-steel terminals as conductors, which enables the battery distribution block to work in extreme environment, suitable for car, RV, yacht, caravan, and ship power system.
- See more on Amazon...
Brand: MOFEEZ | Manufacturer: MOFEEZ
Dimensions: 2.24 x 10.04 x 2.95 inches
See On Amazon #13
DAIERTEK Battery Bus Bar 12V Marine 7 x 1/4" (M6) Power Distribution Block with Cover 12V - 48V Positive & Negative Busbar Terminal Block for Automotive Car Boat
Asin: B0B1HS4BCN | Ean: 0717664070699 | UPC: 717664070699
【Round Corner Base】 - The 12V Distribution Block Is Unique Round Corner Base Design, Which Makes The 12V Power Distribution Block Unique And Special, Looks More Extraordinary Compared With Others..
【Application】 - This Power Bus Bar Uses Copper Plates And Stainless Steel Terminals As Conductors, Which Enables The 12V Power Block To Work In Extreme Environment, Suitable For Automotive, Car, Marine, Boat, Etc..
【More Exposed Area Design Cover】 - The Cover Of This Bus Bar 12V Marine Will Allow 180° Wire Lug Installation And Can Meet Variety Kinds Of Installat Methods Of End Terminals..
【Terminals & Rating】- Each 12V Bus Bar Includes - 7 X M6 (1/4")Terminal Studs. This Battery Terminal Block Can Handle Voltage @ Max 300V Ac, 48V Dc, And Continous Amperage @ Max 130A Ac, 150A Dc..
Features
- Product Name - Battery bus bar terminal block, these busbars will come in pairs, includes one positive bus bar (red one) and one ground bus bar (black one).
- Terminals & Rating - Each 12v bus bar includes - 7 x M6 (1/4)terminal studs. This battery terminal block can handle voltage @ Max 300V AC, 48V DC, and continous amperage @ Max 130A AC, 150A DC.
- Round Corner Base - The 12v distribution block is unique round corner base design, which makes the 12v power distribution block unique and special, looks more extraordinary compared with others.
- More Exposed Area Design Cover - The cover of this bus bar 12v marine will allow 180 wire lug installation and can meet variety kinds of installat methods of end terminals.
- Application - This power bus bar uses copper plates and stainless steel terminals as conductors, which enables the 12v power block to work in extreme environment, suitable for automotive, car, marine, boat, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DAIERTEK
See On Amazon #14
DAIERTEK Bus Bar Terminal Block 4 x 5/16" (M8) Terminal Stud, 6 x #8 (M4) Screw Terminal Positive & Ground Power Distribution Block with Cover Marine Battery Bus Bar 12V - 48V for Automotive Car Boat
Asin: B09YNK5CHY | Ean: 0717664070644 | UPC: 717664070644
Terminals: Each Battery Bus Bar 12V Includes - M8 (5/16") Terminal Studs X 4 And M4 (#8) Screw Terminals X 6, Two Power Bus Bars In The Package - One Positive Bus Bar And One Ground Bus Bar..
Application: This Battery Terminal Block Uses Copper Plates And Stainless Steel Terminals As Conductors, Which Enables The Battery Distribution Block To Work In Extreme Environment, Suitable For Automotive, Car, Marine, Boat, Etc..
With Cover: This 12V Power Distribution Block Will Come With Polycarbonate Cover And Insulated Rubber Nuts, Which Can Cover The Exposed Terminals Of The Bus Bar Terminal Block And Prevent Accidental Electrical Short Circuit..
Rating: Max Voltage: 300V Ac, 48V Dc. Max Continuous Amperage: 130A Ac, 150A Dc. This Battery Distribution Block Will Be Suitable For Both Ac And Dc Systems..
Features
- Features: Marine bus bar junction block 12v, these busbars will come in pairs, include one positive bus bar (red one) and one negative bus bar (black one).
- Rating: Max voltage: 300V AC, 48V DC. Max continuous amperage: 130A AC, 150A DC. This battery distribution block will be suitable for both AC and DC systems.
- Terminals: Each battery bus bar 12v includes - M8 (5/16) terminal studs x 4 and M4 (#8) screw terminals x 6, two power bus bars in the package - one positive bus bar and one ground bus bar.
- With Cover: This 12v power distribution block will come with polycarbonate cover and insulated rubber nuts, which can cover the exposed terminals of the bus bar terminal block and prevent accidental electrical short circuit.
- Application: This battery terminal block uses copper plates and stainless steel terminals as conductors, which enables the battery distribution block to work in extreme environment, suitable for automotive, car, marine, boat, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DAIERTEK
See On Amazon #15
DAIERTEK Negative Bus Bar 12V Marine 4 x 5/16" (M8) Terminal Studs 6 x M4 (#8) Terminal Screws Gound Bus Bar Black Negative Power Distribution Block for Automotive Boat Solar System
Asin: B0B17X95J2 | Ean: 0717664070675 | UPC: 717664070675
【Round Corner Base】 - This 12V Bus Bar Terminal Block Is Unique Round Corner Base Design, Which Makes The Battery Distribution Block Unique And Special, Looks More Extraordinary Compared With Other Busbars..
【Application】 - This Ground Bus Bar 12V Uses Copper Plates And Stainless Steel Terminals As Conductors, Which Enables The Ground Distribution Block To Work In Extreme Environment, Suitable For Automotive, Car, Marine, Boat, Etc..
【More Open Area Design Cover】 - The Cover Of This Marine Bus Bar Will Allow 180° Wire Lug Installation And Can Meet Variety Kinds Of Installat Methods Of End Terminals..
【Rating】- This Marine Power Distribution Block Can Handle Voltage @ Max 300V Ac, 48V Dc, And Continous Amperage @ Max 130A Ac, 150A Dc..
Features
- Terminal - Negative bus bar 12v marine, 4 x M8 (5/16")terminal studs and 6 x M4 (#8) screw design.
- Rating - This marine power distribution block can handle voltage @ Max 300V AC, 48V DC, and continous amperage @ Max 130A AC, 150A DC.
- Round Corner Base - This 12v bus bar terminal block is unique round corner base design, which makes the battery distribution block unique and special, looks more extraordinary compared with other busbars.
- More Open Area Design Cover - The cover of this marine bus bar will allow 180 wire lug installation and can meet variety kinds of installat methods of end terminals.
- Application - This ground bus bar 12v uses copper plates and stainless steel terminals as conductors, which enables the ground distribution block to work in extreme environment, suitable for automotive, car, marine, boat, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DAIERTEK
Dimensions: 4.72 x 7.87 x 4.72 inches
See On Amazon #16
Recoil BBS43-P Bus Bar 4 x M5 Studs 3 Screw Terminals Power Distribution Block Busbar with Ring Terminals (Red+Black)
Asin: B08C9MXVFQ
Max Voltage:300V Ac/ 48V Dc.Max Continuous Amperage: 80A Ac/100A Dc.Max Intermittent: 20A Per Connection.
Gives A Neat And Clean Finish To Any Installation In Your Boat, Car Or Caravan.
Nickle Plated Brass Plate For Low Resistance, Maximum Conductivity And Protect Against Corrosion. Made From Robust Polycarbonate Plastic For Excellent Strength And Durability In Even The Harshest Of Environments.
Reinforced Polycarbonate Cover Attaches With Nylon Nuts To Protect Against Accidental Short Circuits.
Features
- Four connections with M5 stainless steel studs and 3 x #8 stainless steel screws. Comes with 1/4 and #8 insulated ring terminals
- Reinforced Polycarbonate cover attaches with nylon nuts to protect against accidental short circuits
- Max voltage:300V AC/ 48V DC.Max continuous amperage: 80A AC/100A DC.Max intermittent: 20A per connection
- Nickle plated brass plate for low resistance, maximum conductivity and protect against corrosion. Made from robust Polycarbonate plastic for excellent strength and durability in even the harshest of environments
- Gives a neat and clean finish to any installation in your boat, car or caravan
- See more on Amazon...
Brand: RECOIL | Manufacturer: RECOIL
Dimensions: 1.25 x 4.50 x 0.67 Inches | Weight: 0.25 Pounds
See On Amazon #17
4 Terminals Bus Bar, Ampper 4.2" Power/Ground Distribution Block Brass Battery BusBar Junction for Car Vehicle Rv Truck Marine Boat Audio Amplifier and More (Red & Black)
Asin: B09T6LCTXP | Model: Am-TBB4.1-01 | PartNumber: Am-TBB4.1-01
Operation: Max Operating Voltage 48V Dc / 300V Ac, Max Continuous Amperage: 150A Ac / 200A Dc..
Package Includes: 2 Pcs 4 Terminals 4.2" Power / Ground Distribution Brass Battery Junction Block Bus Bar..
Compatible: This Brass Battery Bus Bar Junction Block Is Widely Used For Car, Vehicle, Rv, Truck, Marine And Boat, Audio, Amplifier, Video, Also Electrical Equipment / Appliances..
Customized Design: 4 Stainless M5 Terminal Stud & Nut For Easy Installation And Route Your Wires With Minimal Effort..
Features
- Heavy Duty: nickle plated brass thick busbar, base is made of heavy ABS material, mechanically strong, insulated, heat resistant and flame resistant, durable made for safety use.
- Customized Design: 4 stainless M5 terminal stud & nut for easy installation and route your wires with minimal effort.
- Operation: Max operating voltage 48V DC / 300V AC, Max continuous amperage: 150A AC / 200A DC.
- Compatible: this brass battery bus bar junction block is widely used for car, vehicle, Rv, truck, marine and boat, audio, amplifier, video, also electrical equipment / appliances.
- Package Includes: 2 pcs 4 terminals 4.2 power / ground distribution brass battery junction block bus bar.
- See more on Amazon...
Brand: Ampper | Manufacturer: Ampper
Dimensions: 2.60 x 4.00 x 1.10 inches | Weight: 0.27 pounds
See On Amazon #18
DAIERTEK 12V Power Distribution Block 2 x 1/4" (M6) Terminal Studs 12 x M4 (#8) Terminal Screws Battery Bus Bar Terminal Block Max 48V Positive & Negative Busbar for Automotive Car Boat
Asin: B0B19ZYY6R | Ean: 0717664070682 | UPC: 717664070682
【Round Corner Base】 - The 12V Bus Bar Is Unique Round Corner Base Design, Which Makes The Battery Terminal Block Unique And Special, Looks More Extraordinary Compared With Other Busbars..
【Application】 - This Marine Power Distribution Block Uses Copper Plates And Stainless Steel Terminals As Conductors, Which Enables The Junction Block 12V To Work In Extreme Environment, Suitable For Automotive, Car, Marine, Boat, Etc..
【More Open Area Design Cover】 - The Cover Of This Power Bus Bar Will Allow 180° Wire Lug Installation And Can Meet Variety Kinds Of Installat Methods Of End Terminals..
【Terminals & Rating】- Each Battery Bus Bar Terminal Block Includes - 2 X M6 (1/4")Terminal Studs, 12 X M4 (#8) Terminal Screws. Can Handle Voltage @ Max 300V Ac, 48V Dc, And Continous Amperage @ Max 130A Ac, 150A Dc..
Features
- Product Name - 12V power distribution block, these busbars will come in pairs, includes one positive bus bar (red) and one ground bus bar (black).
- Terminals & Rating - Each battery bus bar terminal block includes - 2 x M6 (1/4)terminal studs, 12 x M4 (#8) terminal screws. Can handle voltage @ Max 300V AC, 48V DC, and continous amperage @ Max 130A AC, 150A DC.
- Round Corner Base - The 12v bus bar is unique round corner base design, which makes the battery terminal block unique and special, looks more extraordinary compared with other busbars.
- More Open Area Design Cover - The cover of this power bus bar will allow 180 wire lug installation and can meet variety kinds of installat methods of end terminals.
- Application - This marine power distribution block uses copper plates and stainless steel terminals as conductors, which enables the junction block 12v to work in extreme environment, suitable for automotive, car, marine, boat, etc.
- See more on Amazon...
Brand: DAIERTEK | Manufacturer: DaierTek
See On Amazon #19
maierke 250A Bus Bar 12V Marine 6 x 1/4" (M6) Terminal Studs 10 x #8 (M4) Screw Terminal 12V-48V Power Distribution Block with Cover,with 26PCS Terminal Parts Battery Bus Bar for Boat Automotive Car
Asin: B0CKYRYVGS
【Special Design】Maierke Power Distribution Block Exposed Sides Allow 180° Wire Lug Installation, Used With The Terminal Parts In The Kit, The Wiring Connect Is Very Convenient And Fast..
【Package Contains】 1Pair 6 X 1/4" (M6) +10 X #8 (M4) Battery Bus Bar（Red+Black ）, 6Pcs Battery Lugs,6Pcs Heat Shrink Tubing Busbar And 14Pcs Ring Terminals..
【Widely Used】Maierke Bus Bar Is Widely Used In Marine, Cars, Trucks, Yachts,Ships, And So On..
【Product Parameters】 Maximum Working Voltage: 300V Ac Or 48V Dc；Maximum Current: 250A..
Features
- Excellent Material maierke bus bar conductor is composed of brass base plate and stainless steel screw terminal,good conductivity and corrosion resistance.The high-density plastic base and PC materials transparent protective shell,elegant.
- Product Parameters Maximum working voltage: 300V AC or 48V DC maximum current: 250A.
- Special Design maierke power distribution block exposed sides allow 180 wire lug installation, used with the terminal parts in the kit, the wiring connect is very convenient and fast.
- Widely Used maierke bus bar is widely used in marine, cars, trucks, yachts,ships, and so on.
- Package Contains 1Pair 6 x 1/4 (M6) +10 x #8 (M4) battery bus bar Red+Black , 6PCS battery lugs,6PCS heat shrink tubing busbar and 14PCS ring terminals.
- See more on Amazon...
Brand: maierke | Manufacturer: maierke
See On Amazon #20
Taxutor 12v Bus Bar 5 Post 300A Power Distribution Block 5/16" Battery Terminal Block Stud with Cover and Wire Lugs
Asin: B0CGNC3HWR
Durable And Safe ：The Base Of The Battery Terminal Block Is Made Of Glass Fiber Reinforced Nylon, The Nuts And Screws Are Made Of Stainless Steel, And The Gasket Is Made Of Copper, Stable In Structure. Each Bus Bar Includes A Cover To Protect Connections From Protect Against Damage And Corrosion. The Insulating Nylon Base Is Flame Retardant, Giving You Peace Of Mind When Using It..
Wide Application: This 5 Post Busbar Is An Excellent Circuit Collection Wire Harness In The Car, Rv, Yacht, Caravan, And Ship Power System. Maximum Amplifier Per Circuit: Determined By The Connected Wires. Maximum Working Voltage Is Dc 48V & Up To 300 Amps..
Easy To Install: You Just Need To Use The Screws To Fix The Battery Terminal Distribution Block In Their Respective Positions, Then Use Wiring On The Screw, Tighten The Nut To Fix, Easy To Operate Without Complicated Installation Steps.
Protect Cover & Nuts：Each Power Busbar Will Come With A Protect Cover And Two Nuts, Which Helps To Shelter As Much Exposed Area As Possible To Reduce The Risks Of Accidental Contact And Prevent Short Circuit, Makes The Circuit Safer..
Features
- Package Includes 300A M8 Stud Bus Bar + 4pcs 1/0 AWG 3/8" Copper Cable Lugs + 10pcs 4 AWG 3/8" Copper Cable Lugs + 14pcs 3:1 Adhesive Lined Heat Shrink Tubing.
- Protect Cover & Nuts Each power busbar will come with a protect cover and two nuts, which helps to shelter as much exposed area as possible to reduce the risks of accidental contact and prevent short circuit, makes the circuit safer.
- Durable and Safe The base of the battery terminal block is made of glass fiber reinforced nylon, the nuts and screws are made of stainless steel, and the gasket is made of copper, stable in structure. Each bus bar includes a cover to protect connections from protect against damage and corrosion. The insulating nylon base is flame retardant, giving you peace of mind when using it.
- Easy to Install: you just need to use the screws to fix the battery terminal distribution block in their respective positions, then use wiring on the screw, tighten the nut to fix, easy to operate without complicated installation steps
- Wide Application: This 5 post busbar is an excellent circuit collection wire Harness in the car, RV, yacht, caravan, and ship power system. Maximum amplifier per circuit: determined by the connected wires. Maximum working voltage is DC 48V & up to 300 Amps.
- See more on Amazon...
Brand: Taxutor | Manufacturer: Taxutor
See On Amazon
Looking For Something Else?
Search