6PCS Gas Can Vent Caps Kits Fuel Gas Can Vent Replacement Cap Compatible with Most Gasoline/Fuel Jug Gas Tank Vent Caps
Asin: B0CCS5XF9T | Ean: 0766157391933 | UPC: 766157391933
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy To Install】 You Need To Drill A 31/64" Or 15/32" Hole(Which Is Slightly Smaller Than 1/2") Into The Can, Or Used A Step Drill Bit With A 18 Normal Drill Bit As A Pilot Drill And Drilled The Step Bit To One Half Inch Hole. Put Soapy Water On The Vent And Tapped The Gas Can Cap Replacement Into The Hole With A Small Mallet. (Be Careful Not To Get Debris Inside Your Gas Can).
【Warranty Service】Use The Vent Cap Insert To Retrofit These Inconvenient Gas Cans In Order For Them To Function Properly And No More Spill Gas On Your Mower. 12 Months Warranty Provided..
【Easy To Operate】If The Hole Of The Gas Tank Vent Cap Is Drilled A Little Bigger, It Is Recommended To Use A Touch Of Sealant/Silicon Or Fuel Grade Epoxy To The Outer Rim Of The Vent Cap Insert, It Needs To Be Securely Fastened To The Gas Tank To Provide A Good Leak-Proof Seal..
【High Quality】Jdiag Gas Tank Vent Caps Are Made Of "High Density Polyethylene"(Hdpe) Plastic, Which Is Fastened And Durable. Do Not Need A Pair Of Pliers To Open When The Gas Can Is Vacuumed And Do Not Pop When The Can Is Pressurized Either..
Features
- Widely Applicable JDIAG gas can vent caps kit fit any 3 gal/5 gal non-vented plastic fuel/gas cans, provides vents and allows for quick and smooth flow of gas.
- High Quality JDIAG gas tank vent caps are made of High Density Polyethylene(HDPE) plastic, which is fastened and durable. Do not need a pair of pliers to open when the gas can is vacuumed and do not pop when the can is pressurized either.
- Easy to Install You need to drill a 31/64 or 15/32 hole(which is slightly smaller than 1/2) into the can, or used a step drill bit with a 18 normal drill bit as a pilot drill and drilled the step bit to one half inch hole. Put soapy water on the vent and tapped the gas can cap replacement into the hole with a small mallet. (Be careful not to get debris inside your gas can)
- Easy to Operate If the hole of the gas tank vent cap is drilled a little bigger, it is recommended to use a touch of sealant/silicon or fuel grade epoxy to the outer rim of the vent cap insert, it needs to be securely fastened to the gas tank to provide a good leak-proof seal.
- Warranty Service Use the vent cap insert to retrofit these inconvenient gas cans in order for them to function properly and no more spill gas on your mower. 12 months warranty provided.
- See more on Amazon...
Brand: JDIAG
See On Amazon Similar To 6PCS Gas Can Vent Caps
#1
Gas Can Spout Replacement, Gas Can Nozzle,(3Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps
Asin: B09HMXJ3JR | Model: FOANRIY-03 | PartNumber: FOANRIY-03 | Ean: 0046432116315 | UPC: 046432116315
Anti-Overflow Design,(Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Can Spout Cap Is Hexagonal)The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down.
Simple To Install,4 Each Set Of Products Includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 Yellow Spouts And Rubber Gaskets, 3 Nozzle Caps With Threads, 2 Kinds Of Gas Can Vent Caps, And The Drill Bit Required To Install The Gas Discharge Cap. During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible.
Can Cover More Oil Cans, We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use.(Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.
High-Quality Materials, These Gas Can Nozzle Replacement Parts Are Made Of High-Quality Hdpe Materials, In Use You Can Bend Freely Without Breaking. Thicker And Widened Rubber Gaskets, Can Better Fit The Bottle Cap, Prevent Liquid Leakage When Refueling.
Features
- Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 6 threaded collar caps 3 Coarse Thread &3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling
- Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down
- Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.(Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps
- Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible
- See more on Amazon...
Brand: FOANRIY | Manufacturer: FOANRIY
See On Amazon #2
Magicfour Fuel Gas Can Vent Caps, 6 Pack Fuel Gas Tank Vent Caps Gas Can Replacement Vent Plug Gas Jug Vent Caps for Gas Fuel Water Can Jug to Allow Faster Flowing
Asin: B08747LWC4 | Ean: 0793740144720 | UPC: 793740144720
Vent Cap: Fuel Can Air Vent Caps Can Be Used For All Kinds Of 3 Or 5 Gallon Gas Can Or Other Plastic Gas Or Water Can, Provide A Vent And Make The Fuel Or Water Pour Out Quickly And Smoothly..
Packing List: The Package Will Come With 6 Pieces Gas Can Vent Caps, 1 Piece Drill, 1 Piece Wire,1 Piece Wrench And 6 Pieces Stickers..
Easy Operation: Simple To Install The Valve Stem And Rubber Sealing Ring Onto The Can Via A Wire After Drilling A Hole Through The Can, Then Screw On The Dust Cap Finished.(It's Better To Drill A Hole On High And Back Of The Can, Avoiding The Handle Because It's Thicker.).
Leak Proof Design: Gas Can Replacement Vent Cap Is Designed With Screw Caps And Double Rubber Sealing Rings That Can Ensure Leak Proof..
Features
- Premium Material: Universal gas can vent cap is made of premium stainless steel and premium rubber, rustproof and durable.
- Leak Proof Design: Gas can replacement vent cap is designed with screw caps and double rubber sealing rings that can ensure leak proof.
- Vent Cap: Fuel can air vent caps can be used for all kinds of 3 or 5 gallon gas can or other plastic gas or water can, provide a vent and make the fuel or water pour out quickly and smoothly.
- Easy Operation: Simple to install the valve stem and rubber sealing ring onto the can via a wire after drilling a hole through the can, then screw on the dust cap finished.(It's better to drill a hole on high and back of the can, avoiding the handle because it's thicker.)
- Packing List: The package will come with 6 pieces gas can vent caps, 1 piece drill, 1 piece wire,1 piece wrench and 6 pieces stickers.
- See more on Amazon...
Brand: Magicfour | Manufacturer: Magicfour
Dimensions: 0.50 x 4.72 x 2.36 inches
See On Amazon #3
Gas Can Cap, Gas Can Cap Replacement (4 kits), High Compatibility, Fits most 1/2/3/5 gallon gas can, Thickened cover and seal design, More durable and better sealing
Asin: B0BY4TBDKB | Ean: 0046432116674 | UPC: 046432116674
Gas Can Covers Replacement, As Shown In The Picture, These Covers Can Replace Most Of Your Gas/Diesel/Water Cans. And Well Made. Give Your Gas Tank A New Look..
Easy To Install, And Durable. Make Your Oil Jug Great Again. If You Need Help With The Installation And Use Process, You Can Contact Us And We Will Be At Your Service As Soon As Possible..
Gas Can Cap Gasket, Using High Quality Materials, Wider And Thicker Gas Can Cap Seal, Better Fit The Cap, Gas Can Cap No Spill, Can Effectively Prevent The Liquid From Overflowing In The Process Of Transportation..
Gas Can Cap, The Gas Can Mouth Size That Can Be Installed Is 1.73In To 1.82In. Please Measure The Size Of Your Gas Can Spout Before Purchasing. New Upgraded Lid, Lowered Height. Make Sure The Gas Tank Lid Can Be Completely Sealed..
Features
- Gas can cap,Includes 4 coarse threaded gas can caps, solid bottom cap, superb compatibility, fits most 1/2/5/10 gallon gas cans, Replacement old gas can caps.
- Gas Can Cap, The gas can mouth size that can be installed is 1.73in to 1.82in. Please measure the size of your gas can spout before purchasing. New upgraded lid, lowered height. Make sure the gas tank lid can be completely sealed.
- Gas Can Covers Replacement, As shown in the picture, these covers can replace most of your gas/diesel/water cans. And well made. Give your gas tank a new look.
- Gas can cap gasket, Using high quality materials, Wider and thicker gas can cap seal, better fit the cap, gas can cap no spill, can effectively prevent the liquid from overflowing in the process of transportation.
- Easy to install, And durable. Make your oil jug great again. If you need help with the installation and use process, you can contact us and we will be at your service as soon as possible.
- See more on Amazon...
Brand: FOANRIY
See On Amazon #4
Gas Can Spout Replacement Universal Kit Leakproof Angle Nozzles Gasket Filter Screen Vent Cap Drill Bit for Old Style Gas Can Compatible with Midwest Blitz Gott Rubbermaind Essence Scepter Pack of 3
Asin: B0CH8XV7MW
Labor-Saving: Gas Can Spout With A Unique Angle Design Makes It Easy To Pour Without The Need For Other Devices And Bending Tube.
High Compatibity: Fuel Can Spout Replacement Kit Include 2 Type Of Thread Cap(Fine & Coarse), Fit For Most Water Jug Gas Can Pre-2009.
Complete Kit: Spout Replacement Vent Kit Come With All The Parts You Need Include Spout And Cap,Vent Cap, Base Cap, Filter Screen,Gaskets And Drill Bit. You Won't Need To Buy Another Part Seperately.
Time-Saving: Push In Vent Cap For Faster And Safer Emptying, Filter/Flame Arrestor Prevent Any Serious Damage For Smoother And Cleaner Pouring.
Fuel-Saving: With This Replacement Nozzle To Pour The Liquid, You Will Never Spill Gas All Over Yourself And Your Equipment Again.
Features
- HIGH QUALITY: Gas can nozzle kit are made of UPGRADE plastic that not easy to crack,thicker and widened rubber gaskets Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling
- FUEL-SAVING: With this replacement nozzle to pour the liquid, you will never spill gas all over yourself and your equipment again
- LABOR-SAVING: Gas can spout with a Unique Angle Design makes it easy to pour without the need for other devices and bending tube
- TIME-SAVING: Push in vent cap for faster and safer emptying, filter/flame arrestor prevent any serious damage for smoother and cleaner pouring
- HIGH COMPATIBITY: Fuel can spout replacement kit include 2 type of thread cap(FINE & COARSE), Fit for most water jug gas can pre-2009
- COMPLETE KIT: Spout replacement vent kit come with all the parts you need include spout and cap,vent cap, base cap, filter screen,gaskets and drill bit. You won't need to buy another part seperately
- See more on Amazon...
Brand: Deelink
See On Amazon #5
19 pcs Gas Can Spout Replacement set, Gas Can Nozzle 5 Gal 3 Bendable tubes 3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps 6 Vent Caps 1 drill Lid
Asin: B0B4F32ZPQ | Model: 1 | PartNumber: 1 | Ean: 0768484739839 | UPC: 768484739839
Simple To Install: 3 Bendable Tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most Of The Cans,3 Threaded Caps For Tube，6 Vent Caps 1 Drill Lid Has Thick Rubber Pad，Please Feel Free To Contact Us For Installation Problems, We Will Solve It For You As Soon As Possible.
We Offer Two Types Of Gas Con Vent Caps,One Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use.Another Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.You Don't Have To Go Through The Hassle Of Replacing Your Old Gas Tank. By Replacing The Nozzle And Vent Kit，Helping You Save Your Old Gas Can Instead Of Buying A New One..
The Spout Cap Tube And The Spout Are Threaded, Every The Spout Cap Has A Thick Rubber Sealing Ring Inside. As Long As You Tighten The Nozzle Cap. No Oil Spills, Even In The Case Of Transport Or A Tank Topped Down..
High Quality: These Gas Can Spout Are Made Of Hdpe Plastic（Same As 10 5 Gallon Gas Can Plastic）, Which Are Bendable And Durable. Thicker And Widened Rubber Gaskets, Can Better Fit The Gasoline Container, Longer Service Life，Safe Without Leakage.
Features
- 19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans 6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks
- HIGH QUALITY: these gas can spout are made of HDPE plastic same as 10 5 gallon gas can plastic , which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life Safe without leakage
- Simple to install: 3 Bendable tubes 3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube 6 Vent Caps 1 drill Lid has Thick Rubber pad Please feel free to contact us for installation problems, we will solve it for you as soon as possible
- The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down.
- We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oil can with a vent cap at the tail, Can replace old vent caps.you don't have to go through the hassle of replacing your old gas tank. By replacing the nozzle and vent kit helping you save your old gas can instead of buying a new one.
- See more on Amazon...
Brand: Pftjujudan | Manufacturer: pft
Weight: 0.55 pounds
See On Amazon #6
10 Pack Universal Large Yellow Fuel Gas Can Vent Caps Chilton Briggs Rotopax Gott
Asin: B00MNC6L24 | Model: GV-Big-YELLOW-10 | PartNumber: GV-Big-YELLOW-10 | Ean: 5133330326986, 7225830185908, 5133330271231, 7131405157570
Vent Caps Are Installed Onto Any Non-Vented Plastic Fuel Cans ~ Allows A Leak Free, Faster Flow.
Fits Plastic And Metal Fuel Jugs Such As Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor And Koplin..
Fits Both Plastic And Metal Fuel Jugs ~ You Will Have To Drill A 31/64" (One Size Below 1/2") Hole Into The Can, Then Push The Vent Into The Hole..
New And Improved With Retaining Lip To Hold The Vent In Place After Installation ~ Made In Usa!.
Features
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 10 Pack
- NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64 (one size below 1/2) hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
- See more on Amazon...
Brand: JSP Manufacturing | Manufacturer: JSP Manufacturing
Dimensions: 4.00 x 4.00 x 4.00 inches
See On Amazon #7
Gas Can Spout Replacement,Fuel Can Spout,Gas Tank Nozzle,Gas Can Nozzle,(3Kit-Yellow) with 3 Coarse Thread Caps & 3 Fine Thread Caps,Flexible Pour Nozzle Suitable,Built in Sealing Ring Prevent Leakage
Asin: B0CQ1QX6QD | Ean: 0658370055399 | UPC: 658370055399
Value Set:19Pcs Gas Tank Nozzle Replacement Sets Include: 3 Yellow Spouts, 6 Screw Collar Caps ( 3 Coarse Thread And 3 Fine Thread ), 3 Spout Sealing Caps, 3 Gas Can Vent Caps-A ( Used For Oil Cans Without A Vent At The End ), 1 Universal Drill Bit ( Use A Drill To Drill A Hole At The End ), 3 Gas Can Vent Caps-B ( Used For Barrels With A Vent Cap At The Top )..
Good Security:Yellow Spouts Including Runner Gasket, Spout Sealing Caps Has A Built-In Sealing Ring, Ensures Gas Leakage And Evaporation Prevention, Threaded Link, Do Not Worry About Leakage During Use, More Security..
Applicability:Gas Can Spout Replacement Set Contains 3 Coarse Thread Caps And 3 Fine Thread Caps, Fitting Oil Jug Mouths Ranging From 1.7Inch To 1.82Inch, The Length Of The Hose Has Been Extended To 8.1Inch, Flexible Pour Nozzle Suitable..
Easy To Use: Gas Spout Replacement Incorporate An Anti-Spill Design, Easy To Install, Easy To Use, Suitable For Most 1/2/5/10 Gallon Gas Cans, You Will Renders A Mess-Free Refueling Experience And Good Life..
Features
- High Quality: Fuel Can Spout Made of High Quality HDPE Material, One-Piece Molding, Stronger, Durable and Less Prone to Breakage, Ensure the Safety of Use.
- Easy to Use: Gas Spout Replacement Incorporate an Anti-Spill Design, Easy to Install, Easy to Use, Suitable for Most 1/2/5/10 Gallon Gas Cans, You Will Renders a Mess-Free Refueling Experience and Good Life.
- Value Set:19Pcs Gas Tank Nozzle Replacement Sets Include: 3 Yellow Spouts, 6 Screw Collar Caps ( 3 Coarse Thread and 3 Fine Thread ), 3 Spout Sealing Caps, 3 Gas Can Vent Caps-A ( Used for Oil Cans Without a Vent at The End ), 1 Universal Drill Bit ( Use A Drill To Drill A Hole At The End ), 3 Gas Can Vent Caps-B ( Used for Barrels With a Vent Cap at the Top ).
- Applicability:Gas Can Spout Replacement Set Contains 3 Coarse Thread Caps and 3 Fine Thread Caps, Fitting Oil Jug Mouths Ranging From 1.7inch to 1.82inch, The Length of the Hose Has Been Extended to 8.1inch, Flexible Pour Nozzle Suitable.
- Good Security:Yellow Spouts Including Runner Gasket, Spout Sealing Caps Has a Built-In Sealing Ring, Ensures Gas Leakage and Evaporation Prevention, Threaded Link, Do Not Worry About Leakage During Use, More Security.
- See more on Amazon...
Brand: BESOTDN | Manufacturer: BESOTDN
See On Amazon #8
10 Pack Replacement YELLOW SPOUT CAPS Top Hat Style fits # 900302 900092 BLITZ Gas Can Spout Cap fits self venting gas can Aftermarket (SPOUTS NOT INCLUDED)
Asin: B074RNG1JB | Model: GV-Spout-Cap-10pk | PartNumber: GV-Spout-Cap-10pk
Measures Approximately: Outside Diameter: 1.30 Inches / Inside Diameter: .85 Inch / Height: .945 Inch.
Fits Blitz Self-Venting Spouts Only ~(Spouts Are Not Included).
Quantity: 10 Pack ~ Keeps Dirt And Debris Out Of Your Can ~ Easy Installation ~ Made In Usa!.
Replaces The Following Part Numbers: 900092, 900094, 9000302.
Features
- New JSP Brand Aftermarket Blitz Yellow Spout Cap ~ Top Hat Style
- Replaces the following Part Numbers: 900092, 900094, 9000302
- Measures Approximately: Outside Diameter: 1.30 inches / Inside Diameter: .85 inch / Height: .945 inch
- Quantity: 10 Pack ~ Keeps dirt and debris out of your can ~ Easy Installation ~ Made in USA!
- Fits Blitz Self-Venting Spouts ONLY ~(SPOUTS ARE NOT INCLUDED)
- See more on Amazon...
Brand: JSP Manufacturing | Manufacturer: JSP Manufacturing
Dimensions: 2.00 x 1.00 x 1.00 inches | Weight: 0.06 pounds
See On Amazon #9
6 Kit 37PCS Gas Can Spout Replacement Set, Gas Can Nozzle 5 Gal 6 Bendable Tubes 6 Screw Collar Coarse Thread &6Fine Thread-Fits Most of The Cans,6 Threaded caps,6 Vent Caps 1 Drill Lid (37)
Asin: B0B9FZ82V5 | Model: p009 | PartNumber: p009 | Ean: 0768461906957 | UPC: 768461906957
Simple To Install: Gas Can Spout Replacement Kit Includes Complete Package: 6 X Screw Caps (1 Coarse Thread And 1 Fine Thread),6X Yellow Nozzle And Rubber Gasket,6X Threaded Nozzle Cap,12X Gas Tank Vent Caps,6X Tube Cap,1X Drill.
We Offer Two Types Of Gas Con Vent Caps,One Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use.Another Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.You Don't Have To Go Through The Hassle Of Replacing Your Old Gas Tank. By Replacing The Nozzle And Vent Kit，Helping You Save Your Old Gas Can Instead Of Buying A New One.
The Spout Cap Tube And The Spout Are Threaded, Every The Spout Cap Has A Thick Rubber Sealing Ring Inside. As Long As You Tighten The Nozzle Cap. No Oil Spills, Even In The Case Of Transport Or A Tank Topped Down..
High Quality: These Gas Can Spout Are Made Of Hdpe Plastic（Same As 10 5 Gallon Gas Can Plastic）, Which Are Bendable And Long Term Use. Thicker And Widened Rubber Gaskets, Can Better Fit The Gasoline Container, Longer Service Life，Safe Without Leakage.
Features
- 37pcs(6 Kit-Yellow)Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans 12 * screw collar caps are all 1.75inch, 6 of them are coarse threads and the other 6 are fine threads. Please check your gas can outside thread diameter before you make this purchase as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks
- HIGH QUALITY: these gas can spout are made of HDPE plastic same as 10 5 gallon gas can plastic , which are bendable and long term use. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life Safe without leakage
- Simple to install: Gas can spout replacement kit includes complete package: 6 x screw caps (1 coarse thread and 1 fine thread),6x yellow nozzle and rubber gasket,6x Threaded Nozzle Cap,12x Gas Tank Vent Caps,6x Tube cap,1X drill
- The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down.
- We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oil can with a vent cap at the tail, Can replace old vent caps.you don't have to go through the hassle of replacing your old gas tank. By replacing the nozzle and vent kit helping you save your old gas can instead of buying a new one
- See more on Amazon...
Brand: Pftjujudan | Manufacturer: ptf
Dimensions: 3.00 x 10.00 x 8.00 inches
See On Amazon #10
JSP Manufacturing 5 Yellow Fuel Gas Can Jug Vent Cap
Asin: B00SEK6XN6 | Model: GV-Big-YELLOW-5-FBA | PartNumber: GV-Big-YELLOW-5-FBA | Ean: 5509005552736
Vent Caps Are Installed Onto Any Non-Vented Plastic Fuel Cans ~ Allows A Leak Free, Faster Flow.
Fits Plastic And Metal Fuel Jugs Such As Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor And Koplin..
Fits Both Plastic And Metal Fuel Jugs ~ You Will Have To Drill A 31/64" (One Size Below 1/2") Hole Into The Can, Then Push The Vent Into The Hole..
New And Improved With Retaining Lip To Hold The Vent In Place After Installation ~ Made In Usa!.
Features
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 5 Pack
- NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64 (one size below 1/2) hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
- See more on Amazon...
Brand: JSP Manufacturing | Manufacturer: JSP Manufacturing
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #11
Solid Base Replacement Gas Can Cap - Yellow Coarse Thread Cap to Prevent Fuel Leakage (Pack of 2)
Asin: B00NB3UUDK | Model: B4 | PartNumber: B4
Ean: 7262318495869, 0857413003094, 7535001174465, 5899405958123, 7785004566525, 7241871111812, 4684505026688, 7258006597304
UPC: 857413003094
Ideal For Fuel Storage And Transportation: The Solid Base Replacement Gas Can Cap Allows You To Store And Transport Fuel Easily Without Worrying About Any Fuel Leakage Or Spillage. Stop The Spill!.
Fix Your Old Gas Cans: With The Ez-Pour Replacement Gas Can Cap, You Don’T Have To Go Through The Trouble Of Replacing Your Old Can Just Because It Has A Loose Cap. Instead, All You Need To Do Is To Replace It With Ours..
Pack Of 2: Ez-Pour Gas Caps Package Includes 2 Pieces Which Are Enough To Meet Your Daily Application And Replacement Requirements. Even Our One Gas Cap Will Serve You For The Longest Time..
Coarse Thread Gas Can Cap: Our Ez Pour Gas Can Cap A Coarse Thread Cap That Makes It More Durable And Has Greater Resistance To Stripping And Cross-Threading. It Will Perfectly Fit Your Old Gas Can And Help To Keep Dirt And Debris Out Of Your Can, Removing All Contaminates Is Critical In The Maintance Of Fueling!.
Features
- Perfect fit: Our EZ-POUR solid base caps are perfect for gas cans such as Midwest, Scepter, EZ POUR s Chilton adapter, and EZ-POUR s jerry can adapter. Due to its high compatibility, you don t need to change the type of replacement gas can cap when using different gas can every time, talk about efficiencies!
- Coarse thread gas can cap: Our EZ POUR gas can cap a coarse thread cap that makes it more durable and has greater resistance to stripping and cross-threading. It will perfectly fit your old gas can and help to keep dirt and debris out of your can, removing all contaminates is critical in the maintance of fueling!
- Ideal for fuel storage and transportation: The solid base replacement gas can cap allows you to store and transport fuel easily without worrying about any fuel leakage or spillage. Stop the spill!
- Pack of 2: EZ-POUR gas caps package includes 2 pieces which are enough to meet your daily application and replacement requirements. Even our one gas cap will serve you for the longest time.
- Fix your old gas cans: With the EZ-POUR replacement gas can cap, you don t have to go through the trouble of replacing your old can just because it has a loose cap. Instead, all you need to do is to replace it with ours.
- See more on Amazon...
Brand: EZ-POUR | Manufacturer: EZ-Pour
Weight: 0.02 pounds
See On Amazon #12
2PCS Gas Fuel Cap Air Vent Hose Universal CNC Tank Valve Vent Tube with Chekc Ball Aluminum Breather for 50cc 110cc 70cc 125cc ATV Motorcycle Dirt Pit Quad Bike Motocross Black
Asin: B09TY41Y36 | Model: 1 | PartNumber: 1 | Ean: 0797444421385 | UPC: 797444421385
High Quality:This Atv Gas Cap Vent Tube Is Made Of 6061 T-6 Aluminum,Perfect Anodize Surface Treatment,While The Breather Tube Is Made From Plastic.Easy To Install And Convenient To Carry.
What You Get:2 X Fuel Tank Vent Tube,Our 12 Month Extended Warranty & 30 Days Money Back And 24/7 Friendly Customer Service.Please Feel Free To Contact Us For Help.
Protection:Fuel Tank Cap Vent Can Protect Your Gas Tank From Filling With Dirt,Dust And Debris In Everyday Use Or More Extreme Motocross Environments,Keeps Air In And Gas From Coming Out.
Fuction:This Atv Breather Tube Can Replaces Awkward Fuel Tank Breather Hoses,One Way Vent Allows The Tank To Breath While Preventing Fuel From Splashing Out And Making A Mess.There Is A Check Ball Inside The Hose.
Features
- Fitment:Our fuel cap breather is fit for most of dirt pit monkey bike ATV Quad 50cc 110cc 70cc 125cc Motorcycle XR CRF RM KX SSR EXC XC SX SXF XCF XCW Dirt Pit Quad Bike Atv
- Fuction:This atv breather tube can replaces awkward fuel tank breather hoses,one way vent allows the tank to breath while preventing fuel from splashing out and making a mess.There is a check ball inside the hose
- High Quality:This atv gas cap vent tube is made of 6061 T-6 aluminum,perfect anodize surface treatment,while the breather tube is made from plastic.Easy to install and convenient to carry
- PROTECTION:Fuel tank cap vent can protect your gas tank from filling with dirt,dust and debris in everyday use or more extreme motocross environments,keeps air in and gas from coming out
- WHAT YOU GET:2 x fuel tank vent tube,our 12 month extended warranty & 30 days money back and 24/7 friendly customer service.Please feel free to contact us for help
- See more on Amazon...
Brand: APPYU | Manufacturer: Rudear store
See On Amazon #13
5 - Yellow Fuel Gas Can Jug Vent Cap Blitz Wedco Scepter Essence Midwest Eagle
Asin: B00Z3TQZJ8 | Model: MYC-Y-VENT5 | PartNumber: MYC-Y-VENT5 | Ean: 0703510517586 | UPC: 703510517586
Fits Blitz, Kolpin, Rotopax, Scepter, Essence, Midwest, Eagle, Chilton, And Many More Gas Cans.
Allows Faster And Smoother Flowing Fuel/Water/Diesel/Kerosene!.
Fits Plastic And/Or Metal Fuel Jugs/Cans!.
Features
- FIVE (5) Mr. Yellow Vents
- Fits Plastic and/or Metal Fuel Jugs/Cans!
- Fits Blitz, Kolpin, Rotopax, Scepter, Essence, Midwest, Eagle, Chilton, and many more gas cans
- Allows faster and smoother flowing fuel/water/diesel/kerosene!
- See more on Amazon...
Brand: Mr. Yellow Cap | Manufacturer: Tri-Sure
See On Amazon #14
Gas Can Vent Caps | 6 Pack Fuel Gas Tank Vent Caps | Metal Gas Can Replacement Vent Plug | Leak-Proof Gas Jug Vent Caps| Gas Tank Exhaust Caps for Faster Flow
Asin: B09NVHYJRK | Ean: 0764735789592 | UPC: 764735789592
💧 【Durable Material】: The Replacement Vent Caps Are Made Of High Quality Stainless Steel. The Other Accessories Of The Fuel Can Air Vent Caps Is Designed With Premium Brass Components And Reliable Rubber Seals Which Can Combine The Firm Construction And Leak-Resistant, Rustproof And Wear Resistant..
💧【What's In The Box】: You Will Receive 6 Pieces Air Vent Replacement Cap Plug With 1 Piece Drill, 1 Piece Wire And 2 Piece Wrench.The Gas Jug Vent Caps Are Suitable For Any Fuel, Diesel, Kerosene, Gas, Water Can Or Any Can You Want To Make It Flow More Faster And Smoother..
💧 【Easy To Assemble】：Simply Drill An Hole In The Jerry Can Or Container, And Use The Wire With The Attached Valve Stem And Rubber Sealing Ring, Then Secure The Nozzle By Using The Provided Cap. It Can Be Easily Complete In 12 Minutes Even Without Any Manual Skills..
💧 【Double Leak-Proof Design】: The Gas Can Replacement Vent Caps Come With The Longer Stainless Steel Gas Can Caps And Quality Rubber Seals, Double Leak Resistant Protection To Prevent The Liquid Of The Can From Splashing And Spilling..
Features
- Faster Flowing The upgraded gas tank vent caps can turn the gas container into vented gas can to make it have an equal air pressure for constant flow. Our gas tank exhaust caps kit can make sure your fuel gas can more smoother and faster flowing to save your time.
- Double Leak-Proof Design : The gas can replacement vent caps come with the longer stainless steel gas can caps and quality rubber seals, double leak resistant protection to prevent the liquid of the can from splashing and spilling.
- Durable Material : The replacement vent caps are made of high quality stainless steel. The other accessories of the fuel can air vent caps is designed with premium brass components and reliable rubber seals which can combine the firm construction and leak-resistant, rustproof and wear resistant.
- Easy To Assemble Simply drill an hole in the jerry can or container, and use the wire with the attached valve stem and rubber sealing ring, then secure the nozzle by using the provided cap. It can be easily complete in 12 minutes even without any manual skills.
- What's In the Box : You will receive 6 pieces air vent replacement cap plug with 1 piece drill, 1 piece wire and 2 piece wrench.The gas jug vent caps are suitable for any fuel, diesel, kerosene, gas, water can or any can you want to make it flow more faster and smoother.
- See more on Amazon...
Brand: TaoTazon | Manufacturer: TaoTazon
See On Amazon #15
Taiss 5PCS Motorcycle Gas Cap Gas Fuel Tank Cap Vent, Breathing Tube Hose Two-Way Fuel-Saving Breather Cap, Suitable For All Off-Road Motorcycles, ATVs.F-008-5S-5P
Asin: B094Z4SMGV
This Product Can Protect Your Air Tank From Being Filled With Dust, Debris And Debris When Using Off-Road Motorcycles Under Normal Circumstances, And Can Prevent Air From Entering..
If You Have Any Quality Problems During Use, Please Contact Us!.
Function: Fuel Cap And Fuel Tank Vent Pipe Hose Is Suitable For Off-Road Motorcycle Atv, All Factories Xr, Crf..
There Is No Valve Ball And Two-Way Ventilation. The Product Is Equipped With A Two-Way Valve, Air Can Enter Into It, And It Can Also Prevent Fuel From Flowing Out..
Features
- Fuel cap fuel tank breather hose,(One each for blue, red, gold, black, and green )
- There is no valve ball and two-way ventilation. The product is equipped with a two-way valve, air can enter into it, and it can also prevent fuel from flowing out.
- This product can protect your air tank from being filled with dust, debris and debris when using off-road motorcycles under normal circumstances, and can prevent air from entering.
- Function: Fuel cap and fuel tank vent pipe hose is suitable for off-road motorcycle ATV, all factories XR, CRF.
- If you have any quality problems during use, please contact us!
- See more on Amazon...
Brand: Taiss | Manufacturer: Taiss
See On Amazon #16
VP Racing Vent Cap Replacement 4 Pack
Asin: B005D1IL5C | Model: VP-3045-4PK | PartNumber: VP-3045-4PK
Item Category: Engine Component Cap.
Item Trademark: Vp Racing Fuels.
Features
- Manufacturer: VP Racing Fuels
- Item Trademark: VP RACING FUELS
- Item Category: Engine Component Cap
- See more on Amazon...
Brand: VP Racing | Manufacturer: VP Racing Fuels
See On Amazon #17
Gas Can Spout Replacement,Gas Can Nozzle,(3 Kit-White) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps
Asin: B0CB8Y3SPS
Anti-Overflow Design, (Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Con Spout Cap Is Hexagonal)The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down.
Simple To Install, Each Set Of Products Includes, 6 Screw Collar Caps (3 Coarse Thread &3 Fine Thread) 3 White Spouts And Rubber Gaskets, 3 Nozzle Caps With Threads，2 Kinds Of Gas Can Vent Caps, And The Drill Bit Required To Install The Gas Discharge Cap. During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible.
Can Cover More Oil Cans, We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use. (Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.
High-Quality Materials, These Gas Can Nozzle Replacement Parts Are Made Of High-Quality Hdpe Materials,In Use, You Can Bend Freely Without Breaking. Thicker And Widened Rubber Gaskets, Can Better Fit The Bottle Cap, Prevent Liquid Leakage When Refueling.
Features
- Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 6 threaded collar caps 3 Coarse Thread &3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling
- Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down
- Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps
- Simple to install, Each set of products includes, 6 Screw Collar Caps (3 Coarse Thread &3 Fine Thread) 3 White Spouts and rubber gaskets, 3 nozzle caps with threads 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible
- See more on Amazon...
Brand: FOANRIY
See On Amazon #18
JSP Manufacturing Pick a Pack Yellow Fuel Gas Can Vent Cap Chilton Briggs Rotopax Gott Anchor Multipack Pricing (10)
Asin: B00U7YLKNU | Model: GV-Big-YELLOW-10-FBA | PartNumber: GV-Big-YELLOW-10-FBA | Ean: 5133330326986
Vent Caps Are Installed Onto Any Non-Vented Plastic Fuel Cans ~ Allows A Leak Free, Faster Flow.
Fits Plastic And Metal Fuel Jugs Such As Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor And Koplin..
Fits Both Plastic And Metal Fuel Jugs ~ You Will Have To Drill A 31/64" (One Size Below 1/2") Hole Into The Can, Then Push The Vent Into The Hole..
New And Improved With Retaining Lip To Hold The Vent In Place After Installation ~ Made In Usa!.
Features
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 10 Pack
- NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64 (one size below 1/2) hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
- See more on Amazon...
Brand: JSP Manufacturing | Manufacturer: JSP Manufacturing
Dimensions: 4.00 x 4.00 x 4.00 Inches
See On Amazon #19
3-Piece Airlock [6 Pack],Fermenting Brewing Airlock Kit with 6PCS #6 Stopper and 12PCS Grommets Fermentation Beer Making Wine Making Kombucha Fits Gallon Jugs
Asin: B0BCHZPW8C | Model: M01 | PartNumber: M01 | Ean: 0760701378784 | UPC: 760701378784
▼This Type Never Fails -The 3-Piece Airlock Is The Perfect Choice For The Primary Fermenter, Since It Comes Apart For Easy Cleaning In The Event Of A Blow-Off.If You Want To Keep A Shipshape Home Brewing Operation, The 3-Piece Airlock Is The Only Way To Go. It's A Cinch To Take These Apart And Clean Them Thoroughly..
▼Worth To Get Them -They Simply Help To Prevent Many Of The Problems That Can Occur During The Fermentation Process. If You Don’T Have One,Click Into Your Cart Now To Get Some ,Making Your Fermenting Even More Simple And Dependable. All Our Item Totally New Before Ship To Amazon.They Had Been Safely Packed With Carton Box.We Offer You 1 Year Quality Service. Any Problem Pls Feel Free To Inform Us.We Will Resolve It Within 24H..
▼Why Should You Use It For Fermenting - It Has Been Very Rare To Have Something Go Bad During The Fermentation Process.Since The Fermentation Process Should Take Place In An Anaerobic (Without Air) Environment, It Is Key To Food Safety. Airlocks Take The Guesswork Out Of When To “Burp” And Aid In Providing The Proper Anaerobic Environment For Food Safety.This Simple Tool, The Airlock, Not Only Makes Fermenting Easier But Aids In Producing Safe And Healthy Food. Who Doesn’T Want That?.
▼Easy Fermenting Get Jobs Done Easily - Each Piece In The Kit Is Set Up To Work Together To Provide You With The Proper Tools To Produce Healthy Food In A Simple System. Once You Have Your Food Submerged Under Your Glass Weight, Simply Place The Lid. Fill Your Airlock 1/2With Water, Cap, And Insert Into Your Lid. It Fits Perfectly Into The #6 Stopper With A Tight Fit And No Leaks, Nice And Sturdy.( Pls Consider Whether Your Container Fit For Our Extra Stopper Size Or Not Before Buying.).
Features
- Upgrade Transparency Airlock - Different than other normal 3-piece airlock in the market,it`s made of healthy material,more harder and more transparent. You can easily see the whole fermentation process.Apply pressure slowing to the airlock when inserting into the drilled plug/stopper and they will last a long time as it`s top quality transparent airlock.
- Easy Fermenting Get Jobs Done Easily - Each piece in the kit is set up to work together to provide you with the proper tools to produce healthy food in a simple system. Once you have your food submerged under your glass weight, simply place the lid. Fill your airlock 1/2with water, cap, and insert into your lid. It fits perfectly into the #6 stopper with a tight fit and no leaks, nice and sturdy.( Pls consider whether your container fit for our extra stopper size or not before buying.)
- This Type Never Fails -The 3-Piece airlock is the perfect choice for the primary fermenter, since it comes apart for easy cleaning in the event of a blow-off.If you want to keep a shipshape home brewing operation, the 3-piece airlock is the only way to go. It's a cinch to take these apart and clean them thoroughly.
- Why Should You Use It for Fermenting - It has been very rare to have something go bad during the fermentation process.Since the fermentation process should take place in an anaerobic (without air) environment, it is key to food safety. Airlocks take the guesswork out of when to burp and aid in providing the proper anaerobic environment for food safety.This simple tool, the airlock, not only makes fermenting easier but aids in producing safe and healthy food. Who doesn t want that?
- Worth to Get Them -They simply help to prevent many of the problems that can occur during the fermentation process. If you don t have one,click into your cart now to get some ,making your fermenting even more simple and dependable. All our item totally new before ship to amazon.They had been safely packed with carton box.We offer you 1 year quality service. Any problem pls feel free to inform us.We will resolve it within 24h.
- See more on Amazon...
Brand: Zazolyne | Manufacturer: Molovee
See On Amazon #20
Mapleza Gas Can Cap for Universal 5 Gallon Gasoline Containers - Plastic Gas Can Caps for Improved Sealing and Transportation - Gas Can Accessories Replacement Lids Pack of 8
Asin: B0CR9ZWX8H | Model: 3 | PartNumber: 3
Durable Construction - Made From High-Quality Materials, Our Gas Can Caps Are Built To Withstand Regular Use. They Are Resistant To Breakage And Wear, Ensuring Long-Term Performance..
Versatile Use - Apart From Gasoline, These Gas Can Caps Can Also Be Used For Other Liquids. They Are Ideal For Any Situation Where Secure Storage And Transportation Of Liquids Are Required..
Easy Installation - Our Gas Can Cap Replacements Are Easy To Install. With A Coarse Thread Design, They Screw On Smoothly And Firmly, Making The Replacement Process Quick And Simple..
Universal Replacement - These Gas Can Lid Replacements Are Ideal For Any Standard 5 Gallon Gas Can. They Are Designed To Replace Lost Or Damaged Lids, Restoring Your Gas Can's Functionality..
Features
- Universal Fit - Our Mapleza gas can cap is designed to fit a wide range of gas cans including 5 gal, 2.5 gallon, and 1 gallon cans. It's also compatible with both plastic and metal cans, making it a versatile choice for all your gas storage needs.
- Universal Replacement - These gas can lid replacements are ideal for any standard 5 gallon gas can. They are designed to replace lost or damaged lids, restoring your gas can's functionality.
- Durable Construction - Made from high-quality materials, our gas can caps are built to withstand regular use. They are resistant to breakage and wear, ensuring long-term performance.
- Easy Installation - Our gas can cap replacements are easy to install. With a coarse thread design, they screw on smoothly and firmly, making the replacement process quick and simple.
- Versatile Use - Apart from gasoline, these gas can caps can also be used for other liquids. They are ideal for any situation where secure storage and transportation of liquids are required.
- See more on Amazon...
Brand: mapleza | Manufacturer: mapleza
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.06 pounds
Warranty: 90 days
See On Amazon
Looking For Something Else?
Search