SpeTool UP Cut Carbide Insert Flush Trim Router Top Bearing Trimming Tool 1/2" Shank Extra Long Cutter for Thick Wood Trimming
Asin: B0CCY1C3JM | Ean: 0792933240270 | UPC: 792933240270
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Industrial Quality. The Flush Cut Router Bit Is Made Of Industrial Super-Strength Steel Body And Solid Tungsten Carbide Blade With High Hardness And Durable.
Tips. After Each Use Or Continuous Processing For Half An Hour, Please Removel Wood Chips Covering The Flush Trim Bits To Extend Tool Lifespan.
Applicable Equipment And Materials. Perfect For Trimming Particle Board, Chipboard, Mdf, Density Board, Melamine Board, Veneer Plywood (Laminate) And Solid Wood. It Can Be Used With Table Mount And Handheld Router With 1/2" Collet..
Need To Know. This Bit Is Suggest To Use In A Table-Mounted Router. Must Sure The Set Screws Are Thigtened Frimly Before Each Time Use. The Recommend Rpm 8K-12K.
High Precision. Made By Cnc Machine And Friction Coat, Precision Guide Bearing Make This Bit Cutting Smoothly And Accurate.
Unique Design. The Pattern Flush Trim Router Bits Is Specifically Designed With Top Bearing And The Carbide Replaceable Blades (12Mmx12mmx2.2Mm) Fixed By Spiral.
Features
- Specification. 50mm cutting length, 32mm cutting diameter, 1/2" shank, 10pcs (12mmx12mmx2.2mm) carbide inserts
- Unique Design. The pattern flush trim router bits is specifically designed with Top bearing and the carbide replaceable blades (12mmx12mmx2.2mm) fixed by spiral
- Industrial Quality. The flush cut router bit is made of Industrial super-strength steel body and solid tungsten carbide Blade with high hardness and durable
- High Precision. Made by CNC machine and friction coat, precision guide bearing make this bit cutting smoothly and accurate
- Applicable Equipment and Materials. Perfect for trimming Particle board, Chipboard, MDF, Density board, Melamine board, Veneer plywood (Laminate) and Solid wood. It can be used with table mount and handheld router with 1/2 collet.
- NEED TO KNOW. This bit is suggest to use in a table-mounted router. MUST sure the set screws are thigtened frimly before each time use. The recommend RPM 8K-12K
- Tips. After each use or continuous processing for half an hour, please removel wood chips covering the flush trim bits to extend tool lifespan
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon Similar To SpeTool UP Cut Carbide Insert
#1
SpeTool Carbide Insert Surfacing Router Bit Spoilboard Planing 1-1/4 inch Cutting Diamter Slab Flattening for Woodworking with ATS Coating
Asin: B0C6XMCXD3
Extra-Long Life. With The Ats Coated Carbide, It Provide A 2 Times Longer Life Than The No Coated Carbide Insert.
Application Equipment. Perfect For Wood Slabs Flattening, Can Be Used On Wood Slab, Hand Router, Cnc Router.
Multi-Use. Used On Soft And Hard Woods, Particle Board, Mdf, Plywood Compact Panel, Laminate, Acrylic And Etc..
Cost-Effective. The 4 Edges Of Carbide Inserts Can Be Used With A Screwdriver, 2.2Mm Thickness Carbide Provide Longer Life Than Other Carbide Blade. Replace The Carbide Inserts Instead Of Entire Bit When Dull.
Features
- 2+2 INSERTS Design. 2 wings wood cnc router, 1/4 shank, 1-1/4 cutting diameter, 1/4 shank, use 10*10*2.2 carbide insert.the inserts will be available on asin "B09CPDVBSG , B0CGR7S8SR"
- COST-EFFECTIVE. The 4 edges of carbide inserts can be used with a screwdriver, 2.2mm thickness carbide provide longer life than other carbide blade. Replace the carbide inserts instead of entire bit when dull
- EXTRA-LONG LIFE. With the ATS coated carbide, it provide a 2 times longer life than the no coated carbide insert
- MULTI-USE. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc.
- APPLICATION EQUIPMENT. Perfect for wood slabs flattening, can be used on wood slab, hand router, cnc router
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #2
SpeTool Spiral Router Bits Down Cut 1/4 inch Cutting Diameter, 1/4 inch Shank Solid Carbide CNC Bits End Mill for Wood Cut Carving Engraver
Asin: B07NVL6KWT | Model: SP-D1/4-1/4-D | PartNumber: SP-D1/4-1/4-D
Durable And Precise. Spetool Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/4 Router Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Down Cut. Spiral Cnc Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Features
- SPECIFICATION. Solid Carbide down cut router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect.
- DOWN CUT. Spiral CNC bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- DURABLE AND PRECISE. SpeTool Downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 router bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #3
SpeTool CNC Spoilboard Surfacing Router Bit 1/2 Shank 2 Inch Cutting Diameter, Slab Flatting Router Bit Carbide Insert Planing Bit Wood Bottom Cleaning
Asin: B0C1TVQ71S
Cost-Effective Carbide Insert. The Surfacing Router Bit Utilizes 4-Sided Solid Carbide Inserts, All 4 Edges On Inserts Can Be Used. The Blade Can Be Rotated Or Replaced With A New Blade When The 4 Edges Are Dull, Instead Of Replacing The Whole Bit. The Inserts Will Be Available On Asin "B0c1tsqljw,B08v8pwl6s".
Extensive Adaptability. This 2 Inch Flattening Router Bit Is Perfect For Wood Slab Flattening, Bottom Cleaning, Resurface Or Plane The Top Surface Of Spilboard. Used On Cnc And Other Automatic Routers As Well As Hand-Held And Table-Mounted Portable Routers. Suitable For Soft And Hard Woods, Mdf, Plywood, Laminate, And Etc..
Industrial Grade. The Body Is Made Of High-Strength Steel And Cnc Machined, Enhance It's Vibration Resistance. It Also Features An Anti-Kickback Design And Use High-Quality Carbide Inserts, Ensuring Sharp Edges And Optimal Chip Clearance For A Unique Cutting Effect..
Ats Coated. Use Ats Coating Process To Provide A Better Heat Resistance And Wear Resistance For This Surfacing Router Bit, Thus Keeping It Sharp And Ensuring Great Performance, Ats Coated Carbide Insert Provides Up To 2.5 Times Tool Life Compared To Uncoated..
Features
- ESSENTIAL DESIGN PARAMETER. This planer router bit feature a 3-wing insert carbide design, 1/2" shank 2" cutting diameter. The insert carbide dimensions are 12mm * 12mm * 2.2mm, 35-degree angle, straight hole. The 3-wing design enhances stability during operation, resulting in higher woodworking efficiency.
- ATS COATED. Use ATS coating process to provide a better heat resistance and wear resistance for this surfacing router bit, thus keeping it sharp and ensuring great performance, ATS coated carbide insert provides up to 2.5 times tool life compared to uncoated.
- COST-EFFECTIVE CARBIDE INSERT. The surfacing router bit utilizes 4-sided solid carbide inserts, all 4 edges on inserts can be used. The blade can be rotated or replaced with a new blade when the 4 edges are dull, instead of replacing the whole bit. The inserts will be available on asin B0C1TSQLJW,B08V8PWL6S
- INDUSTRIAL GRADE. The body is made of high-strength steel and CNC machined, enhance it's vibration resistance. It also features an anti-kickback design and use high-quality carbide inserts, ensuring sharp edges and optimal chip clearance for a unique cutting effect.
- EXTENSIVE ADAPTABILITY. This 2 inch flattening router bit is perfect for wood slab flattening, bottom cleaning, resurface or plane the top surface of spilboard. Used on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Suitable for soft and hard woods, MDF, plywood, laminate, and etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #4
SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8" Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving
Asin: B085RG6WLD | Model: 4Pcs-D1/8 | PartNumber: 4Pcs-D1/8
Applicable Materials. Spetool Cnc Carving Bits, Suitable For 2D/3D Carving Hard Wood, Plywood, Soft Wood, Oak, Mdf, Aluminum, Alloy Copper And Acrylic Etc..
Durable And Precise. Spetool Tapered End Mills Deliver Exceptional Durability And Precise Results, Even During Demanding Projects(Long Service Life For Sharpen)..
Wide Application. The Cnc Bits With Ball End Perfect For Cnc Engraving Machine, Woodworking, Metal Engraving, Mold Making, Detail Carving, 2D/3D Engaraving, Fine Detail Work;.
2-Flute Design. Tapered Angle Ball Nose End Mill / Cone Cutters, Super Design For Carving And Clearing Edge; Ball Nose And Spiral Design, Ensuring Smooth And Efficient Cutting Through Various Materials.
Features
- SPECIFICATION. 4PCS tool set-2 flute, 0.25/0.5/0.75/1.0MM ball radius, 15MM CL, 1-1/2" OL, 1/8" shank, TiAIN Coated, 55HRC, can be used on routers with 1/8" collect;
- 2-FLUTE DESIGN. Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge; ball nose and spiral design, ensuring smooth and efficient cutting through various materials
- APPLICABLE MATERIALS. SpeTool CNC Carving bits, suitable for 2D/3D carving Hard wood, Plywood, Soft wood, OAK, MDF, Aluminum, Alloy Copper and Acrylic etc.
- WIDE APPLICATION. The cnc bits with ball end perfect for CNC engraving machine, Woodworking, Metal Engraving, Mold Making, detail carving, 2D/3D engaraving, fine detail work;
- DURABLE AND PRECISE. SpeTool tapered end mills deliver exceptional durability and precise results, even during demanding projects(long service life for sharpen).
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 1.50 x 0.12 inches
See On Amazon #5
SpeTool CNC Spoilboard Surfacing Router Bit 1/2" Shank 2-1/2" Cutting Diameter,4 Wings Coated Carbide Insert Slab Flatting Router Planer Bit Wood Planing Bit Woodworking Tools
Asin: B0C1TWG4BP
Industrial Grade Design: 1/2" Shank And 2-1/2" Cutting Diameter Solid Steel For Long Lasting And Keep Body Straight.
Used On Cnc And Other Automatic Routers As Well As Hand-Held And Table-Mounted Plunge Routers With Sled For Your Woodworking.
Used On:This Flattening Router Bit Is Perfect For Wood Slab Flattening, Bottom Cleaning, Resurface Or Plane The Top Surface Of Spilboard. Suitable For Soft And Hard Woods, Mdf, Plywood, Laminate, And Etc..
Cost Effective: The Surfacing Router Bit Utilizes 4-Sided Solid Carbide Inserts With Ats Coating Which Provide Heat Resistance And Wear Resistance,Keep Sharp Enseure Great Performance And Provide Up To 2.5X Tool Life . All 4 Edges Fo Inserts Can Be Used. Replace The Inserts When Needed, Instead Of Replacing The Whole Bit. The Inserts Will Be Available On Asin "B0c1tsqljw,B08v8pwl6s".
Features
- FAST CUTTING: this planer router bit designed with 4-wings carbide inserts and 2-1/2" cutting diameter, with 4 -wings carbide inserts( 12mm*12mm*2.2mm,35 degree, straight hole), resulting in more efficient woodworking running.
- COST EFFECTIVE: the surfacing router bit utilizes 4-sided solid carbide inserts with ATS Coating which provide heat resistance and wear resistance,keep sharp enseure great performance and provide up to 2.5X tool life . all 4 edges fo inserts can be used. replace the inserts when needed, instead of replacing the whole bit. the inserts will be available on asin B0C1TSQLJW,B08V8PWL6S
- INDUSTRIAL GRADE DESIGN: 1/2 shank and 2-1/2 cutting diameter solid steel for long lasting and keep body straight
- USED ON:This flattening router bit is perfect for wood slab flattening, bottom cleaning, resurface or plane the top surface of spilboard. suitable for soft and hard woods, MDF, plywood, laminate, and etc.
- Used on CNC and other automatic routers as well as hand-held and table-mounted plunge routers with sled for your woodworking
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #6
SpeTool 5Pcs Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank Router Bit Set HRC55 Solid Carbide CNC End Mill for Woodworking Mortise Slot Carving Engraver
Asin: B09PZSMR7T | Model: W04005 | PartNumber: W04005
Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bit Set Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bit Set is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #7
SpeTool 10pcs Square Carbide Inserts Replacement for Slab Flattening Router Bit (12mmx12mm, 2.2mm Thick), 35 Degree Cutting Angle, Straight -Hole
Asin: B08V8PWL6S | Model: IPA-D12*12-10PCS | PartNumber: IPA-D12*12-10PCS | Ean: 0792276837229 | UPC: 792276837229
Easy To Operate, Each Blade Has 4 Sharp Edges, 4 Times Life Than The Normal Router Bit.
Packed In A Plastic Container, Come With 10 Pcs Carbide Inserts.
Fit For Septool Spiral/Helical Planer Cutter Head System, Diy Wood Lathe Tools.
The Blades Made Of Solid Tungsten Carbide, Sharp And Durable, Smooth Cutting Work.
Features
- Spetool square corners carbide inserts,2.2mm thickness,12mm length, 12mm width, 4-indexable cutting edge, 35 Cutting Angle
- The blades made of solid tungsten carbide, sharp and durable, smooth cutting work
- Easy to operate, each blade has 4 sharp edges, 4 times life than the normal router bit
- Fit for septool spiral/helical planer cutter head system, DIY wood lathe Tools
- Packed in a plastic container, come with 10 pcs carbide inserts
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #8
SpeTool 3 Inch Extra Large Spoilboard Surfacing Router Bit 2+2 Flatten Carbide Replacement Insert Router Bit Slab Flattening Wood Cutter 1/2 Inch Shank with ATS Coated Insert
Asin: B0C8HDXSTB
Cost-Effective Carbide Insert. The Surfacing Router Bit Boasts 4-Sided Solid Carbide Inserts, Allowing For Full Utilization Of All 4 Edges On Each Insert. When The Edges Become Dull, Simply Rotate Or Replace The Blade With A New One, Eliminating The Need To Replace The Entire Bit. Enhancing Cost Efficiency Without Compromising Performance. Find The Inserts Available On Asin "B0c1tsqljw, B08v8pwl6s"..
Extensive Adaptability. This Exquisite 3-Inch Cnc Spoilboard Surfacing Router Bit,Compatible With Cnc Machines, Automatic Routers, As Well As Handheld And Table-Mounted Portable Routers.Experience Its Unrivaled Performance On A Wide Range Of Materials Including Both Soft And Hard Woods, Mdf, Plywood, Laminate, And More, Elevating Your Craftsmanship To New Heights..
Industrial Grade. The Surfacing Router Bit Exudes Excellence With Its High-Strength Steel Body, Meticulously Cnc Machined To Enhance Vibration Resistance. High-Quality Design And Equipped With Premium-Grade Carbide Inserts, It Guarantees Razor-Sharp Edges And Impeccable Chip Clearance, Delivering A Cutting Experience That Is Nothing Short Of Extraordinary..
Ats Coated. Employing Ats Coating Process, This Surfacing Router Bit Attains Remarkable Heat Resistance And Wear Resistance, Ensuring Enduring Sharpness And Unparalleled Performance. With An Ats Coated Carbide Insert, This Bit Delivers An Impressive Tool Life That Exceeds Uncoated Alternatives By Up To 2.5 Times, Making It A Choice Of Uncompromising Excellence..
Features
- ESSENTIAL DESIGN PARAMETER. This Router Bit features a 2+2 carbide blade design with a 1/2" shank diameter and a 3" cutting diameter. The insert carbide measures 12mm * 12mm * 2.2mm,35-degree angle,straight hole. The 3-inch cutting diameter design enhances the cutting surface area during operation, ultimately elevating woodworking efficiency.
- ATS COATED. Employing ATS coating process, this surfacing router bit attains remarkable heat resistance and wear resistance, ensuring enduring sharpness and unparalleled performance. With an ATS coated carbide insert, this bit delivers an impressive tool life that exceeds uncoated alternatives by up to 2.5 times, making it a choice of uncompromising excellence.
- COST-EFFECTIVE CARBIDE INSERT. The surfacing router bit boasts 4-sided solid carbide inserts, allowing for full utilization of all 4 edges on each insert. When the edges become dull, simply rotate or replace the blade with a new one, eliminating the need to replace the entire bit. Enhancing cost efficiency without compromising performance. Find the inserts available on ASIN B0C1TSQLJW, B08V8PWL6S.
- INDUSTRIAL GRADE. the surfacing router bit exudes excellence with its high-strength steel body, meticulously CNC machined to enhance vibration resistance. High-quality design and equipped with premium-grade carbide inserts, it guarantees razor-sharp edges and impeccable chip clearance, delivering a cutting experience that is nothing short of extraordinary.
- EXTENSIVE ADAPTABILITY. this exquisite 3-inch CNC Spoilboard Surfacing Router Bit,compatible with CNC machines, automatic routers, as well as handheld and table-mounted portable routers.Experience its unrivaled performance on a wide range of materials including both soft and hard woods, MDF, plywood, laminate, and more, elevating your craftsmanship to new heights.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #9
SpeTool Up Cut Spiral Flush Trim Router Bit with TAC Coated Extra Long 1-1/8 Inch Cutting Length Bottom Bearing for Woodwork Template Pattern
Asin: B0BR6GHRBV | Model: SPTL-D1/4-1/4-U-SPE-X | PartNumber: SPTL-D1/4-1/4-U-SPE-X
Sharp Efficient. The Flush-Trim Spiral Router Bits Is Sharper And Stay Sharp Longer Than Conventional Flush-Trim Router Bits.Provide Better Chip Evacuation, Less Heat Buildup, And Cleaner Edges.
Tips. After Each Use Or Continuous Processing For Half An Hour, Please Removel Wood Chips Covering The Flush Trim Bits To Extend Tool Lifespan.
Wide Application. This Flush Trim Bit Can Be Used For Any Flush Trim Situation And Is An Excellent Choice For Pattern Or Template Work.
Compatibility. The Spiral Flush Trim Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Table Mount And Handheld Router With 1/4" Collet.
Smooth Stable. The Router Bearing Bit Uses A Double Ball Bearing Pilot At The Tip To Run Against Your Project Template Ensure Smooth Running.
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated.
Features
- SPECIFICATION. Up cut flush trim Router Bits 1-1/8" cutting length; 1/4" cutting diameter; 1/4" shank; 3" overall length, can be used on routers with 1/4" collect
- COATING. The new coating provide up to 2.5 times life than the uncoated
- SHARP EFFICIENT. The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.provide better chip evacuation, less heat buildup, and cleaner edges
- SMOOTH STABLE. The router bearing bit uses a double ball bearing pilot at the tip to run against your project template ensure smooth running
- WIDE APPLICATION. This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work
- COMPATIBILITY. The spiral flush trim Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with table mount and handheld router with 1/4 collet
- Tips. After each use or continuous processing for half an hour, please removel wood chips covering the flush trim bits to extend tool lifespan
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #10
SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving
Asin: B081PNGWKT | Model: W04014 | PartNumber: W04014
Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts.
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length , can be used on routers with 1/4" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts
- COMPATIBILITY. This CNC Router Bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon
Looking For Something Else?
Search