VIVIDA #8 Metal Roof Pipe Flashing Boot, Silicone Pipe Flashing Vent Boot, High Temp Flexible Roof Jack Pipe Boot for Pipe OD 7" to 13", Roofing Screws & Hex Socket Included, 1 Pack
Asin: B0CD1HLLP3 | Model: #8 Metal Roofing Pipe Flashing Set | PartNumber: #8 Metal Roofing Pipe Flashing Set
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Good Temperature Tolerance】High Temp Silicone Rubber Has Good Performance Under -100 °F To 450 °F. Do Not Use Consistently In Applications Where The Temperature Range Is Exceeded. The Product Will Not Perform Properly When The Temperature Exceeds The Applicable Range..
【For Metal Roofing】It Is An Easy Install And Works Well Sealing The Pipe Out The Roof. Metal Roof Pipe Flashing Widely Used In Chimneys, Exhaust Vents, Woodstoves, Pipe Openings..
【What's Included】Package Contains #8 Metal Roofing Pipe Flashing 1 Pcs, #10 X 1-1/2" Roofing Screws 30 Pcs, 8Mm Hex Bit Socket 1 Pcs. Meet The Needs Of Your Installation..
【Good Fit & Molded Easily】Metal Roofing Pipe Flashing Pliable Rubber For A Good Fit. Flexible Metal Base Can Be Molded To Metal Roofing Rib Lines, Roofing Screws Are Easy To Apply..
【Note】When Used With Deep Corrugated Panels (More Than 1.5" Corrugated), Please Select The Next Size Roof Pipe Boot That Can Accommodate The Same Pipe. If The Pitch Of The Roof Is Greater Than 10/12, It Is Recommended To Choose A Flashing With A Square Base..
Features
- #8 PIPE FLASHING BOOT #8 Metal roofing pipe flashing is suitable for 7"-13" OD pipe. The rubber pipe boot can be cut to size easily. Please make sure to buy the right size pipe boot and don't over tighten screws.
- NOTE When used with deep corrugated panels (more than 1.5 corrugated), please select the NEXT SIZE roof pipe boot that can accommodate the same pipe. If the pitch of the roof is greater than 10/12, it is recommended to choose a flashing with a SQUARE BASE.
- GOOD TEMPERATURE TOLERANCE High temp silicone rubber has good performance under -100 f to 450 f. Do not use consistently in applications where the temperature range is exceeded. The product will not perform properly when the temperature exceeds the applicable range.
- GOOD FIT & MOLDED EASILY Metal roofing pipe flashing pliable rubber for a good fit. Flexible metal base can be molded to metal roofing rib lines, roofing screws are easy to apply.
- FOR METAL ROOFING It is an easy install and works well sealing the pipe out the roof. Metal roof pipe flashing widely used in chimneys, exhaust vents, woodstoves, pipe openings.
- WHAT'S INCLUDED Package contains #8 metal roofing pipe flashing 1 PCS, #10 x 1-1/2 roofing screws 30 PCS, 8mm hex bit socket 1 PCS. Meet the needs of your installation.
- See more on Amazon...
Brand: VIVIDA | Manufacturer: VIVIDA
See On Amazon Similar To VIVIDA 8 Metal Roof Pipe
#1
VIVIDA End Rail Clamps 1-3/8" x 1-3/8", End Rail T Clamps Chain Link Fence Fittings, Panel T Clamps for 1-3/8" OD Pipe, Galvanized Fence Pipe T Clamps, Chain Link Fence Parts, 6 PCS
Asin: B0B6NDXDXQ | Model: end rail clamps 1-3/8 inch | PartNumber: end rail clamps 1-3/8 inch | Ean: 0602581458302 | UPC: 602581458302
【Bolts & Nuts Included】Package Contains End Rail T Clamps 6 Pack. No Need To Buy Bolts And Nuts Separately, One Package Can Meet All Of Your Use Needs..
【Easy Installation】Chain Link Fence Parts End Rail T Clamps Complete Installation Faster And Easier, Without The Need For Punching Or Welding, Time Saving..
【Note】Please Measure The Outer Diameter Of Your Rails In Advance Before Purchasing, And Select The Appropriate Size Of The Chain Link Fence Fittings End Rail T Clamps To Use..
【Application】Chain Link Fence Fittings Work For Connecting Rail To Post/Pipe To Pipe. Widely Used In Fences, Kennel, Handrails And Other Connections..
【Hot-Dip Galvanized】Chain Link Fence Parts With Strong Hardness, High Corrosion Resistance. Chain Link Fence End Rail T Clamps Are Not Easy To Rust And Have A Long Life Span. Chain Link Fence Fittings Have Great Performance In Outdoor Environments..
Features
- 1-3/8" END RAIL T CLAMPS Chain link fence fittings end rail T clamp suits for connecting 1-3/8" OUTER DIAMETER pipe to another 1-3/8" OUTER DIAMETER pipe.
- HOT-DIP GALVANIZED Chain link fence parts with strong hardness, high corrosion resistance. Chain link fence end rail T clamps are not easy to rust and have a long life span. Chain link fence fittings have great performance in outdoor environments.
- BOLTS & NUTS INCLUDED Package contains end rail t clamps 6 pack. No need to buy bolts and nuts separately, one package can meet all of your use needs.
- APPLICATION Chain link fence fittings work for connecting rail to post/pipe to pipe. Widely used in fences, kennel, handrails and other connections.
- EASY INSTALLATION Chain link fence parts end rail t clamps complete installation faster and easier, without the need for punching or welding, time saving.
- NOTE Please measure the OUTER DIAMETER of your rails in advance before purchasing, and select the appropriate size of the chain link fence fittings end rail T clamps to use.
- See more on Amazon...
Brand: VIVIDA | Manufacturer: VIVIDA
See On Amazon #2
#3 Metal Roof Pipe Flashing, VIVIDA Metal Roofing Pipe Boot Kit, Silicone Pipe Flashing Boot, High Temp, for Pipe OD 1/4" to 5", Square Base, Roofing Screws & Hex Socket Included, 1 Pack
Asin: B0CD1BRJDR | Model: #3 Square Pipe Flashing Set | PartNumber: #3 Square Pipe Flashing Set
【#3 Square Pipe Flashing】#3 Metal Roofing Pipe Flashing Is Suitable For 1/4"-5" Od Pipe. The Rubber Pipe Boot Can Be Cut To Size Easily. Please Make Sure To Buy The Right Size Pipe Boot And Don't Over Tighten Screws..
【For Metal Roofing】It Is An Easy Install And Works Well Sealing The Pipe Out The Roof. Metal Roof Pipe Flashing Widely Used In Chimneys, Exhaust Vents, Woodstoves, Pipe Openings..
【What's Included】Package Contains #3 Metal Roofing Pipe Flashing 1 Pcs, #10 X 1-1/2" Roofing Screws 15 Pcs, 8Mm Hex Bit Socket 1 Pcs. Meet The Needs Of Your Installation..
【Good Temperature Tolerance】High Temp Silicone Rubber Has Good Performance Under -100 °F To 450 °F. Do Not Use Consistently In Applications Where The Temperature Range Is Exceeded. The Product Will Not Perform Properly When The Temperature Exceeds The Applicable Range..
【Note】When Used With Deep Corrugated Panels (More Than 1.5" Corrugated), Please Select The Next Size Roof Pipe Boot That Can Accommodate The Same Pipe. If The Pitch Of The Roof Is Greater Than 10/12, It Is Recommended To Choose A Flashing With A Square Base..
Features
- PERFECT FOR CORRUGATED ROOF Metal roofing pipe flashing pliable rubber for a good fit. Flexible square base can be molded to metal roofing rib lines, roofing screws are easy to apply. Great for your metal corrugated roof and 10/12 to 12/12 pitch roof.
- NOTE When used with deep corrugated panels (more than 1.5 corrugated), please select the NEXT SIZE roof pipe boot that can accommodate the same pipe. If the pitch of the roof is greater than 10/12, it is recommended to choose a flashing with a SQUARE BASE.
- #3 SQUARE PIPE FLASHING #3 Metal roofing pipe flashing is suitable for 1/4-5 OD pipe. The rubber pipe boot can be cut to size easily. Please make sure to buy the right size pipe boot and don't over tighten screws.
- GOOD TEMPERATURE TOLERANCE High temp silicone rubber has good performance under -100 f to 450 f. Do not use consistently in applications where the temperature range is exceeded. The product will not perform properly when the temperature exceeds the applicable range.
- FOR METAL ROOFING It is an easy install and works well sealing the pipe out the roof. Metal roof pipe flashing widely used in chimneys, exhaust vents, woodstoves, pipe openings.
- WHAT'S INCLUDED Package contains #3 metal roofing pipe flashing 1 PCS, #10 x 1-1/2 roofing screws 15 PCS, 8mm hex bit socket 1 PCS. Meet the needs of your installation.
- See more on Amazon...
Brand: VIVIDA | Manufacturer: VIVIDA
See On Amazon #3
Yaocom Roof Metal Vent Boot Chimney Black Roof Jack Flashing Square Base 8" x 8" Epdm Stove Roof Vent Pipe Od 0.25"-5.75"(2 Pcs)
Asin: B0CL4LWM2M | Model: XIE-Yaocom-5 | PartNumber: XIE-Yaocom-5
Quality Material Composition: Meet Your Reliable Home Improvement Companion; Our Roof Flashings Are Fashioned From Quality Epdm And Aluminum Materials That Enhance Its Robustness While Maintaining Its Aesthetic Appeal; Featuring A Sleek Black Main Part Coupled With A Silver, Aluminum Frame, It Stands As A Testament To Style And Functionality.
Suitable For A Variety Of Applications: Homes, Offices, Or Workshops, These Roofing Boots Cater To All; Whether You Need To Install Ventilation Pipes Or Chimneys, Our Roof Pipe Flashings Stand As An Ideal Selection To Top Off Your Roofing Solutions; Make Your Diy Installation Process A Breeze; Please Note That The Package Just Includes Roof Flashing, Not Including Installation Hardware.
User Centric And Compact Design: Our Roof Vent Pipe Boot Cuts Across Multiple Dimensions To Ensure A Firm Seal On The Pipe While Simplifying Size Measurement Tasks; The Compact Design Of The Roof Jack Permits A Gentle Slide Over Pipes, With A Tilt Limit Of About 45 Degrees, Making It Suitable For A Broad Range Of Roof Installations.
Versatile Size And Shape: Blending Convenience With Flexibility, Our Roofing Pipe Flashing Boot Is Cone Shaped With Square Base About 8 X 8 Inches, Designed For Optimal Fitting Around Diverse Roof Pipes; The Versatile Nature Of This Product Allows For An Accurate Cut To Your Desired Pipe Diameter From About 0.25" To 5.75"; Please Check The Proper Size Before Your Purchase.
Features
- Generous Package Offering: receive your practical home solution in 2 pieces of roof jacks, generously provided to cater to your various needs; This is quite advantageous as it allows for spare part availability during installations and adjustments; A convenient experience awaits; Please note that the package just includes roof flashing, not including installation hardware
- Versatile Size and Shape: blending convenience with flexibility, our roofing pipe flashing boot is cone shaped with square base about 8 x 8 inches, designed for optimal fitting around diverse roof pipes; The versatile nature of this product allows for an accurate cut to your desired pipe diameter from about 0.25 to 5.75; Please check the proper size before your purchase
- Quality Material Composition: meet your reliable home improvement companion; Our roof flashings are fashioned from quality EPDM and aluminum materials that enhance its robustness while maintaining its aesthetic appeal; Featuring a sleek black main part coupled with a silver, aluminum frame, it stands as a testament to style and functionality
- User Centric and Compact Design: our roof vent pipe boot cuts across multiple dimensions to ensure a firm seal on the pipe while simplifying size measurement tasks; The compact design of the roof jack permits a gentle slide over pipes, with a tilt limit of about 45 degrees, making it suitable for a broad range of roof installations
- Suitable for a Variety of Applications: homes, offices, or workshops, these roofing boots cater to all; Whether you need to install ventilation pipes or chimneys, our roof pipe flashings stand as an ideal selection to top off your roofing solutions; Make your DIY installation process a breeze; Please note that the package just includes roof flashing, not including installation hardware
- See more on Amazon...
Brand: Yaocom | Manufacturer: Yaocom
See On Amazon #4
VIVIDA #3 Metal Roof Pipe Flashing Boot, Silicone Pipe Flashing Vent Boot, High Temp Flexible Roof Jack Pipe Boot for Pipe OD 1/4" to 5", Roofing Screws & Hex Socket Included, 1 Pack
Asin: B0CD1G5NXB | Model: #3 Pipe Flashing Boot | PartNumber: #3 Pipe Flashing Boot
【Good Temperature Tolerance】High Temp Silicone Rubber Has Good Performance Under -100 °F To 450 °F. Do Not Use Consistently In Applications Where The Temperature Range Is Exceeded. The Product Will Not Perform Properly When The Temperature Exceeds The Applicable Range..
【For Metal Roofing】It Is An Easy Install And Works Well Sealing The Pipe Out The Roof. Metal Roof Pipe Flashing Widely Used In Chimneys, Exhaust Vents, Woodstoves, Pipe Openings..
【What's Included】Package Contains #3 Metal Roofing Pipe Flashing 1 Pcs, #10 X 1-1/2" Roofing Screws 18 Pcs, 8Mm Hex Bit Socket 1 Pcs. Meet The Needs Of Your Installation..
【Good Fit & Molded Easily】Metal Roofing Pipe Flashing Pliable Rubber For A Good Fit. Flexible Metal Base Can Be Molded To Metal Roofing Rib Lines, Roofing Screws Are Easy To Apply..
【Note】When Used With Deep Corrugated Panels (More Than 1.5" Corrugated), Please Select The Next Size Roof Pipe Boot That Can Accommodate The Same Pipe. If The Pitch Of The Roof Is Greater Than 10/12, It Is Recommended To Choose A Flashing With A Square Base..
Features
- #3 PIPE FLASHING BOOT #3 Metal roofing pipe flashing is suitable for 1/4"-5" OD pipe. The rubber pipe boot can be cut to size easily. Please make sure to buy the right size pipe boot and don't over tighten screws.
- NOTE When used with deep corrugated panels (more than 1.5 corrugated), please select the NEXT SIZE roof pipe boot that can accommodate the same pipe. If the pitch of the roof is greater than 10/12, it is recommended to choose a flashing with a SQUARE BASE.
- GOOD TEMPERATURE TOLERANCE High temp silicone rubber has good performance under -100 f to 450 f. Do not use consistently in applications where the temperature range is exceeded. The product will not perform properly when the temperature exceeds the applicable range.
- GOOD FIT & MOLDED EASILY Metal roofing pipe flashing pliable rubber for a good fit. Flexible metal base can be molded to metal roofing rib lines, roofing screws are easy to apply.
- FOR METAL ROOFING It is an easy install and works well sealing the pipe out the roof. Metal roof pipe flashing widely used in chimneys, exhaust vents, woodstoves, pipe openings.
- WHAT'S INCLUDED Package contains #3 metal roofing pipe flashing 1 PCS, #10 x 1-1/2 roofing screws 18 PCS, 8mm hex bit socket 1 PCS. Meet the needs of your installation.
- See more on Amazon...
Brand: VIVIDA | Manufacturer: VIVIDA
See On Amazon #5
Dektite Premium #4 Black EPDM Metal Roof Pipe Flashing, Square Base, Pipe OD 3" to 7"
Asin: B0771T9FLW | Model: DFE104B | PartNumber: DFE104B | Ean: 0687748063056 | UPC: 687748063056
Slide Flashing Down Pipe And Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2".
20 Year Manufacturer's Warranty Against Manufacturing Defects.
If Trimmed And Installed Correctly, Pipe Flashing Will Not Break Or Crack.
Flashing Base Is 11" X 11" - Pipe Boot Fits 3" To 7" Outside Pipe Diameter.
Features
- Continuous Service Temperature Ranges of -58F to 239F (EPDM)
- Flashing Base is 11 x 11 - Pipe Boot Fits 3 to 7 Outside Pipe Diameter
- Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2
- If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
- 20 Year Manufacturer's Warranty Against Manufacturing Defects
- See more on Amazon...
Brand: Dektite | Manufacturer: Deks Industries Pty Ltd
Dimensions: 4.75 x 11.00 x 11.00 Inches | Weight: 14.00 ounces
See On Amazon #6
4 Pack | 6" Pre-Cut PVC Rooftop Pipe Support | Roof Conduit Support Blocks for Piping on Roofs | PVC Conduit Roof Support
Asin: B07LC51G9L | Model: RSS0.5_cs4 | PartNumber: RSS0.5_cs4
No Roof Penetration: Affix Roof Pipes To Support Block Without Damaging The Roof Material With The Use Of Pipe Guides, Clamps, Tab Tape, Or Other Hardware (Not Included)..
What's Included? 4 6-Inch Pre-Cut Pvc Pipe Stands Made Of 100% Recycled, Durable Pvc..
Heavy-Duty: Unlike Heavy Wood Blocks, These Roof Blocks For Conduit Last Longer And Won't Damage Your Roof Membrane..
Versatile: The Pvc Pipe Stands Support Small Water Lines, Gas Pipes, Electrical Conduit Pipes, Metal Plumbing Pipes, Condensate Lines, Refrigeration Pipes And Walkway Planks..
Features
- Cost Effective: Popular Rooftop Sleeper Support is already pre-cut to 6" (152.4 mm) in length. A cost effective rooftop pipe support solution.
- Versatile: The PVC pipe stands support small water lines, gas pipes, electrical conduit pipes, metal plumbing pipes, condensate lines, refrigeration pipes and walkway planks.
- No Roof Penetration: Affix roof pipes to support block without damaging the roof material with the use of pipe guides, clamps, tab tape, or other hardware (not included).
- Heavy-Duty: Unlike heavy wood blocks, these roof blocks for conduit last longer and won't damage your roof membrane.
- What's Included? 4 6-inch pre-cut PVC pipe stands made of 100% recycled, durable PVC.
- See more on Amazon...
Brand: ROOFTOP SLEEPER SUPPORT | Manufacturer: ROOFTOP SLEEPER SUPPORT
Dimensions: 4.00 x 12.00 x 7.00 inches | Weight: 2.70 Pounds
See On Amazon #7
VIVIDA #3 Metal Roof Pipe Flashing Boot, EPDM Pipe Flashing Vent Boot, Flexible Pipe Flashing Roof Jack Pipe Boot for Pipe OD 1/4" to 5", Roofing Screws & Hex Socket Included, Black, 1 Pack
Asin: B0CD1FCP3Z | Model: #3 EPDM Pipe Flashing Boot | PartNumber: #3 EPDM Pipe Flashing Boot
【Good Abrasion Resistance】Epdm Pipe Flashing Boot Has Good Performance Under -65 °F To 250 °F. Do Not Use Consistently In Applications Where The Temperature Range Is Exceeded. The Product Will Not Perform Properly When The Temperature Exceeds The Applicable Range..
【For Metal Roofing】It Is An Easy Install And Works Well Sealing The Pipe Out The Roof. Metal Roof Pipe Flashing Widely Used In Chimneys, Exhaust Vents, Woodstoves, Pipe Openings..
【What's Included】Package Contains #3 Metal Roofing Pipe Flashing 1 Pcs, #10 X 1-1/2" Roofing Screws 18 Pcs, 8Mm Hex Bit Socket 1 Pcs. Meet The Needs Of Your Installation..
【Good Fit & Molded Easily】Metal Roofing Pipe Flashing Pliable Rubber For A Good Fit. Flexible Metal Base Can Be Molded To Metal Roofing Rib Lines, Roofing Screws Are Easy To Apply..
【Note】When Used With Deep Corrugated Panels (More Than 1.5" Corrugated), Please Select The Next Size Roof Pipe Boot That Can Accommodate The Same Pipe. If The Pitch Of The Roof Is Greater Than 10/12, It Is Recommended To Choose A Flashing With A Square Base..
Features
- #3 PIPE FLASHING BOOT #3 Metal roofing pipe flashing is suitable for 1/4"-5" OD pipe. The rubber pipe boot can be cut to size easily. Please make sure to buy the right size pipe boot and don't over tighten screws.
- NOTE When used with deep corrugated panels (more than 1.5 corrugated), please select the NEXT SIZE roof pipe boot that can accommodate the same pipe. If the pitch of the roof is greater than 10/12, it is recommended to choose a flashing with a SQUARE BASE.
- GOOD ABRASION RESISTANCE EPDM pipe flashing boot has good performance under -65 f to 250 f. Do not use consistently in applications where the temperature range is exceeded. The product will not perform properly when the temperature exceeds the applicable range.
- GOOD FIT & MOLDED EASILY Metal roofing pipe flashing pliable rubber for a good fit. Flexible metal base can be molded to metal roofing rib lines, roofing screws are easy to apply.
- FOR METAL ROOFING It is an easy install and works well sealing the pipe out the roof. Metal roof pipe flashing widely used in chimneys, exhaust vents, woodstoves, pipe openings.
- WHAT'S INCLUDED Package contains #3 metal roofing pipe flashing 1 PCS, #10 x 1-1/2 roofing screws 18 PCS, 8mm hex bit socket 1 PCS. Meet the needs of your installation.
- See more on Amazon...
Brand: VIVIDA | Manufacturer: VIVIDA
See On Amazon #8
zipelo 12PCS BA9 BA9S 53 57 1895 64111 LED Car Light Bulb, Ultra Bright Automotive License Plate Side Door Courtesy Interior Dome Map Light, Vehicle Interior Decor Universal for SUV Truck RV
Asin: B0CW2L5S7X | Model: Light Bulb | PartNumber: Light Bulb
【Easy Installation】: Plug And Play, Easy To Install. Note, It Is Only For Dc Power, Not Suitable For Ac Power.Led Does Not Light Up, Rotate 180 Degrees (Reverse Polarity). Instant Full Brightness, No Flicker, Better Protect Your Eyes. It Can Create A Comfortable And Vivid Lighting Atmosphere In The Car And Make Your Journey More Enjoyable..
【Compatibility】: Compatible With Ba9s-5Smd-5050、Ba9s 12146、1445、1445Ll、17053、1815、1816、1816Ll、182、1889、1891、1891Ll、1892、1893、1893Ll、1895、1895A、1895Ll、216、256、257、293、363、3886X、3893、3893Ll、47830、47835、53、53Ll、53X、57、57Ll、57X、6253、64111、64113、64115、756..
【Wide Application】: This Product Has A Wide Range Of Uses, It Can Be Used For Automotive Indicator Lights, Reading Lights, Instrument Lights, Welcome Lights, License Plate Lights, Corner Lights, Side Side Lights, Trunk Lights, And Fits All Ba9s Interface Lights. Does Not Support Any Exterior Lights Such As Marker, Tail, Third Brake, Turn, Parking, Motorcycle Or Vehicles With Ac/14.7Vdc+. For Use With Ac/Dc 12 Volt Lighting Only..
【Soft Light】: This Product Can Show The Real Color Of The Object Very Well. Provides Very Bright Light. No Flickering, No Buzzing, Protect Your Eyes. Can Emit 60 Lumens Of Clear And Comfortable Light In 360 Degrees Beam Angle, Low Heat, Safer To Use..
Features
- High Quality : This product is made of high quality materials, low heat, not easy to break, safe and reliable, long service life, can reduce the trouble of frequent replacement of light bulbs. Weatherproof design, can be moisture-proof and dust-proof, to prevent the LED from water or moisture erosion.
- Soft Light : This product can show the real color of the object very well. Provides very bright light. No flickering, no buzzing, protect your eyes. Can emit 60 lumens of clear and comfortable light in 360 degrees beam angle, low heat, safer to use.
- Easy Installation : Plug and play, easy to install. Note, it is only for DC power, not suitable for AC power.LED does not light up, rotate 180 degrees (reverse polarity). Instant full brightness, no flicker, better protect your eyes. It can create a comfortable and vivid lighting atmosphere in the car and make your journey more enjoyable.
- Wide Application : This product has a wide range of uses, it can be used for automotive indicator lights, reading lights, instrument lights, welcome lights, license plate lights, corner lights, side side lights, trunk lights, and fits all BA9S interface lights. Does not support any exterior lights such as marker, tail, third brake, turn, parking, motorcycle or vehicles with AC/14.7VDC+. For use with AC/DC 12 volt lighting only.
- Compatibility : Compatible with BA9S-5SMD-5050 BA9S 12146 1445 1445LL 17053 1815 1816 1816LL 182 1889 1891 1891LL 1892 1893 1893LL 1895 1895A 1895LL 216 256 257 293 363 3886X 3893 3893LL 47830 47835 53 53LL 53X 57 57LL 57X 6253 64111 64113 64115 756.
- See more on Amazon...
Brand: zipelo | Manufacturer: zipelo
Dimensions: 0.30 x 0.20 x 0.20 Inches | Weight: 0.02 Pounds
Warranty: 0.2
See On Amazon #9
Flashers #7 Black EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 6" to 11") - 100% Made In The USA
Asin: B08HVVMJ46 | Model: FB7 | PartNumber: FB7
Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Epdm Flashers Are Rated To Service A Continuous Temperature Range Of -65 To +250 Degrees Fahrenheit..
Features
- MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
- EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- See more on Amazon...
Brand: Flashers | Manufacturer: Jackman Industries, Inc.
Dimensions: 6.00 x 14.25 x 14.25 inches
See On Amazon #10
Flashers #8 Silicone Grey High Temp Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 7" to 13") - 100% Made in The USA
Asin: B08HVVCF8W | Model: FSG8 | PartNumber: FSG8
Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Silicone Flashers Are Rated To Service A Continuous Temperature Range Of -100 To +450 Degrees Fahrenheit..
Features
- MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
- Silicone Flashers are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit.
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- See more on Amazon...
Brand: Flashers | Manufacturer: Jackman Industries, Inc.
Dimensions: 6.00 x 16.50 x 16.50 Inches
See On Amazon #11
Dektite Premium #8 Black EPDM Metal Roof Pipe Flashing, Square Base, Pipe OD 6-3/4" to 14"
Asin: B016CGXG8S | Model: DFE108B | PartNumber: DFE108B | Ean: 9316867051316
Easily Customize Pipe Boot Size On The Job Site With Shears Or Heavy Scissors.
20 Year Manufacturer's Warranty Against Manufacturing Defects.
If Trimmed And Installed Correctly, Pipe Flashing Will Not Break Or Crack.
Continuous Service Temperature Ranges Of -58F To 239F (Epdm).
Features
- Flashing Base is 19-1/2" x 19-1/2" - Pipe Boot Fits 6-3/4" to 14" Outside Pipe Diameter
- Continuous Service Temperature Ranges of -58F to 239F (EPDM)
- Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors
- If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
- 20 Year Manufacturer's Warranty Against Manufacturing Defects
- See more on Amazon...
Brand: Dektite | Manufacturer: Deks Industries Pty Ltd
Dimensions: 0.04 x 19.50 x 19.50 inches | Weight: 45.00 ounces
See On Amazon #12
VIVIDA #3 Metal Roof Pipe Boot, EPDM Pipe Flashing Vent Boot, Flexible Pipe Flashing Roof Jack Pipe Boot for Pipe OD 1/4" to 5", Roofing Screws & Hex Socket Included, Square Base, Black, 1 Pack
Asin: B0CQP473YG | Model: #3 Metal Roof Pipe Boot | PartNumber: #3 Metal Roof Pipe Boot
【Good Abrasion Resistance】Epdm Pipe Flashing Boot Has Good Performance Under -65 °F To 250 °F. Do Not Use Consistently In Applications Where The Temperature Range Is Exceeded. The Product Will Not Perform Properly When The Temperature Exceeds The Applicable Range..
【What's Included】Package Contains #3 Metal Roofing Pipe Flashing 1 Pcs, #10 X 1-1/2" Roofing Screws 15 Pcs, 8Mm Hex Bit Socket 1 Pcs. Meet The Needs Of Your Installation..
【Note】When Used With Deep Corrugated Panels (More Than 1.5" Corrugated), Please Select The Next Size Roof Pipe Boot That Can Accommodate The Same Pipe. If The Pitch Of The Roof Is Greater Than 10/12, It Is Recommended To Choose A Flashing With A Square Base..
【For Metal Roofing】It Is An Easy Install And Works Well Sealing The Pipe Out The Roof. Metal Roof Pipe Flashing Widely Used In Chimneys, Exhaust Vents, Woodstoves, Pipe Openings..
【#3 Square Pipe Flashing】#3 Metal Roofing Pipe Flashing Is Suitable For 1/4"-5" Od Pipe. The Rubber Pipe Boot Can Be Cut To Size Easily. Please Make Sure To Buy The Right Size Pipe Boot And Don't Over Tighten Screws..
Features
- PERFECT FOR CORRUGATED ROOF Metal roofing pipe flashing pliable rubber for a good fit. Flexible square base can be molded to metal roofing rib lines, roofing screws are easy to apply. Great for your metal corrugated roof and 10/12 to 12/12 pitch roof.
- #3 SQUARE PIPE FLASHING #3 Metal roofing pipe flashing is suitable for 1/4-5 OD pipe. The rubber pipe boot can be cut to size easily. Please make sure to buy the right size pipe boot and don't over tighten screws.
- GOOD ABRASION RESISTANCE EPDM pipe flashing boot has good performance under -65 f to 250 f. Do not use consistently in applications where the temperature range is exceeded. The product will not perform properly when the temperature exceeds the applicable range.
- FOR METAL ROOFING It is an easy install and works well sealing the pipe out the roof. Metal roof pipe flashing widely used in chimneys, exhaust vents, woodstoves, pipe openings.
- WHAT'S INCLUDED Package contains #3 metal roofing pipe flashing 1 PCS, #10 x 1-1/2 roofing screws 15 PCS, 8mm hex bit socket 1 PCS. Meet the needs of your installation.
- NOTE When used with deep corrugated panels (more than 1.5 corrugated), please select the NEXT SIZE roof pipe boot that can accommodate the same pipe. If the pitch of the roof is greater than 10/12, it is recommended to choose a flashing with a SQUARE BASE.
- See more on Amazon...
Brand: VIVIDA | Manufacturer: VIVIDA
See On Amazon #13
#4 (3" - 7") DEKTITE RED Square Base High Temp Silicone - Flexible Pipe Flashing Boot - Dektite pipe flashing (DFE204RE)
Asin: B07ZWP5X6J | Model: DFE204RE | PartNumber: DFE204RE | Ean: 9316867051019
If Trimmed And Installed Correctly, Pipe Flashing Will Not Break Or Crack.
20 Year Manufacturer's Warranty Against Manufacturing Defects.
Use For Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, And Exhaust Vents.
Continuous Service High Temperature Ranges Of -58F To 392F (Silicone).
Features
- Flashing Base is 11" by 11" - Pipe Boot Fits 3" to 7" Outside Diameter Pipe
- Continuous Service High Temperature Ranges of -58F to 392F (Silicone)
- If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack
- Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents
- 20 Year Manufacturer's Warranty Against Manufacturing Defects
- See more on Amazon...
Brand: Dektite | Manufacturer: Deks Industries Pty Ltd
Weight: 1.00 Pounds
See On Amazon #14
Flashers #8 Grey EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 7" to 13") - 100% Made in The USA
Asin: B08HVV1KH6 | Model: FG8 | PartNumber: FG8
Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Epdm Flashers Are Rated To Service A Continuous Temperature Range Of -65 To +250 Degrees Fahrenheit..
Features
- MANUFACTURER DIRECT: 100% Made in the USA by an American Workforce
- EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- See more on Amazon...
Brand: Flashers | Manufacturer: Jackman Industries, Inc.
Dimensions: 6.00 x 16.50 x 16.50 Inches
See On Amazon #15
DEKTITE #8 - DF108B - Round Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Booting Flashing (for OD Pipe Sizes 7"- 13")
Asin: B07ZWCL3X1 | Ean: 9316867006224
Black Dektite Pipe Flashing Is Rated For Continuous Service Temperature Ranges Of -58˚F To +239˚ F.
Recognized By The Bsi Iso 9001 Quality Management And Upc Iapmo Uniform Plumbing Code Organizations.
Dektite Base Seals Against Uneven Metal Roofing With Ease. Pipe Flashing Will Not Break Or Crack..
Epdm Rubber Boot With Flexible Base (Aluminum Collar). Pipe Boot Fits 7" To 13" Pipe Od..
Features
- #8 Black Dektite Round Standard Flexible Pipe Boot Flashing. Base is 16-3/4" in Circular Diameter
- EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 7 to 13 Pipe OD.
- Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58 F to +239 F
- Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack.
- Recognized by the bsi ISO 9001 Quality Management and UPC IAPMO Uniform Plumbing Code Organizations
- See more on Amazon...
Brand: Dektite | Manufacturer: Dektite
See On Amazon #16
Dektite #8 Gray EPDM Metal Roof Pipe Flashing, Round Base, Pipe OD 7" - 13"
Asin: B077QRH7DH | Model: DF108G | PartNumber: DF108G | Ean: 9316867006255, 0687748042815 | UPC: 687748042815
Flashing Base Diameter Is 16-3/4", Pipe Boot Fits 7" To 13" Outside Pipe Diameter.
Features
- Continuous Service Temperature Ranges of -58F to 239F (EPDM)
- Flashing Base Diameter is 16-3/4, Pipe Boot Fits 7 to 13 Outside Pipe Diameter
- See more on Amazon...
Brand: Dektite | Manufacturer: Deks Industries Pty Ltd
Dimensions: 5.50 x 16.50 x 16.50 Inches | Weight: 0.02 Pounds
See On Amazon #17
HNGM Wind Chimes Butterfly Harp Aluminum Pipe Wind Chimes Holiday Couple Gifts Home Decoration Metal Ornaments with Beautiful Sound (Color : Dream Butterfly flyi)
Asin: B09DL74LGN | Ean: 9001328065147, 9001328065710
Meaningful Gifts-Wind Chimes Can Represent The Best Blessings, Love, Safety, Happiness, Joy, Wealth, Health And Peace. The Perfect Gift For Mom, Family, Friends, Mother's Day, Father's Day, Birthday, Memorial Day, Thanksgiving Day.
High-Quality Household Wind Chimes-The Wind Chimes Are Made Of High-Quality Aluminum And Durable Nylon Wire, Which Are Light In Weight, Waterproof, Non-Deformable, And Can Be Hung For A Long Time. The Outer Coating Is Not Easy To Fade And Has A Long-Lasting Appearance..
Decorative Wind Chimes-Wind Chimes Are A Mascot, Symbolizing Auspiciousness And Full Of Beauty. The Size And Design Are Suitable For Indoor And Outdoor Use, And The Hook Can Be Easily Hung Anywhere. No Matter Where You Hang It, You Can Feel Its Beauty. The Lovely And Vivid Butterfly Wind Chimes Are A Perfect Match For Indoor And Outdoor Decoration. They Can Be Hung On Trees, Gardens, Houses, Lawns, Porches, Courtyards, Halls, Waves, Roofs, Balconies, Windows, Corridors And Living Rooms..
Unvoiced-The Sound Comes From Nature, And The Wind Is Playing Music, Which Makes People Calm, Relaxing And Comfortable. Carefully Care, Our Wind Chimes Can Make A Sound, Accompany Every Day Of The Year, And Add Good Luck To Your Home.
Features
- Unique design-handmade butterfly wind chimes. The round hook hangs up the whole suit to form a beautiful wind chime, giving people an elegant and traditional look. No assembly required. Lightweight and easy to hang
- Unvoiced-the sound comes from nature, and the wind is playing music, which makes people calm, relaxing and comfortable. Carefully care, our wind chimes can make a sound, accompany every day of the year, and add good luck to your home
- Meaningful gifts-wind chimes can represent the best blessings, love, safety, happiness, joy, wealth, health and peace. The perfect gift for mom, family, friends, mother's day, father's day, birthday, memorial day, thanksgiving day
- Decorative wind chimes-wind chimes are a mascot, symbolizing auspiciousness and full of beauty. The size and design are suitable for indoor and outdoor use, and the hook can be easily hung anywhere. No matter where you hang it, you can feel its beauty. The lovely and vivid butterfly wind chimes are a perfect match for indoor and outdoor decoration. They can be hung on trees, gardens, houses, lawns, porches, courtyards, halls, waves, roofs, balconies, windows, corridors and living rooms.
- High-quality household wind chimes-The wind chimes are made of high-quality aluminum and durable nylon wire, which are light in weight, waterproof, non-deformable, and can be hung for a long time. The outer coating is not easy to fade and has a long-lasting appearance.
- See more on Amazon...
Brand: HNGM | Manufacturer: HNGM
Dimensions: 29.53 x 11.81 x 11.81 inches | Weight: 0.44 Pounds
See On Amazon #18
Flashers #8 Brown EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 7" to 13")
Asin: B08LGMRYGP
Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Epdm Flashers Are Rated To Service A Continuous Temperature Range Of -65 To +250 Degrees Fahrenheit..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Features
- 100% Made in the USA by an American Workforce
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
- See more on Amazon...
Brand: Flashers | Manufacturer: Jackman Industries, Inc.
Dimensions: 6.00 x 16.50 x 16.50 inches
See On Amazon #19
Flashers #8 White EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 7" to 13")
Asin: B08LFWG3HQ
Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Epdm Flashers Are Rated To Service A Continuous Temperature Range Of -65 To +250 Degrees Fahrenheit..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Features
- 100% Made in the USA by an American Workforce
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
- See more on Amazon...
Brand: Flashers | Manufacturer: Jackman Industries, Inc.
Dimensions: 6.00 x 16.50 x 16.50 inches
See On Amazon #20
Flashers #8 Red EPDM Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing (Pipe OD 7" to 13")
Asin: B08LFWN7PF
Flashers’ Flexible Rubber Won’T Crack And Allows For Expansion, Contraction, And Pipe Vibration. The Heavy Rubber Fold And Aluminum Ring At The Base Allows Them To Fit Any Roof Pitch Or Metal Profile..
Epdm Flashers Are Rated To Service A Continuous Temperature Range Of -65 To +250 Degrees Fahrenheit..
Flashers Require No Special Tools Or Complicated Installation Methods. The Rubber Cone Is Clearly Marked With Pipe Dimensions, In Both Inches And Millimeters, So It Can Be Easily Customized With Tin Snips Or Scissors..
Our Flashers Product Line Holds A Certificate Of Listing With Iapmo R&T. This Shows Our Products Are In Compliance With The Uniform Plumbing Code (Upc) And International Plumbing Code (Ipc)..
Features
- 100% Made in the USA by an American Workforce
- Our Flashers product line holds a Certificate of Listing with IAPMO R&T. This shows our products are in compliance with the Uniform Plumbing Code (UPC) and International Plumbing Code (IPC).
- Flashers flexible rubber won t crack and allows for expansion, contraction, and pipe vibration. The heavy rubber fold and aluminum ring at the base allows them to fit any roof pitch or metal profile.
- Flashers require no special tools or complicated installation methods. The rubber cone is clearly marked with pipe dimensions, in both inches and millimeters, so it can be easily customized with tin snips or scissors.
- EPDM Flashers are rated to service a continuous temperature range of -65 to +250 degrees Fahrenheit.
- See more on Amazon...
Brand: Flashers | Manufacturer: Jackman Industries, Inc.
Dimensions: 6.00 x 16.50 x 16.50 inches
See On Amazon
Looking For Something Else?
Search