AUTOOL Brake Fluid Tester, Brake Fluid Moisture Detector, DOT3 DOT4 DOT5.1 Tester with 2.8" Backlit Display Audible Alarm for Various Brake Fluid Model
Asin: B0CDLC1HJ2 | Model: AS502 | PartNumber: AS502 | Ean: 6972697788643
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Easy Instant Read】2.8 Inches High Resolution Screen, Instant Display Result, Large Display With Backlight, Easy And Clear Reading In Sun Or Night. In Addition, If The Brake Fluid Contains Too Much Water, The Buzzer Will Alarm To Remind You To Change The Brake Fluid..
【Three Years Warranty】For Any Quality Problems. If As502 Has Any Defect, We Will Provide New Replacement Or Solutions For Our Customers Until Satisfaction Without Delay, And Provides Lifetime Technical Support. For Any Needs, You Are Warmly Welcomed To Contact Us And We Will Get Back To You Asap Within 24 Hours..
【Water Content Percentage】Ok Icon Indicates That The Moisture Content Is Between 0% And 2%. The Brake Fluid Performance Is Fine; The 🔺 Icon Indicates A Moisture Content Of 2% To 3%. The Brake Fluid Performance Is Ok, But It Need To Be Detected And Observed In The Near Future; The × Icon Indicates That The Moisture Content Is Above 3%. The Brake Fluid Performance Is Poor, It Need To Be Replaced..
【Precision Test And Sensitive Probe】Equipped With A Highly Sensitive Sensor And A 260Mm Foldable Hose, Can Quickly And Accurately Detect Dot-3, Dot-4, Dot-5.1 Brake Fluid And Has Received The Result In Seconds. The Outer Layer Of The Hose Is Made Of 304 Stainless Steel, Which Has The Characteristics Of Oil Resitance, Oxidation Resistance, And Corrosion Resistance. The Foldable Probe Can Rotate 180 Degree,You Can Choose Any Angle To Testing..
Features
- More Powerful Detection Range Automotive Brake Fluid Detector is common fit for most vehicle. Check the health status of DOT-3, DOT-4, DOT-5.1 brake fluid and also most synthetic brake fluids. The brake fluid tester is designed with normal mode and expert mode. The expert mode is convenient for professional mechanics to select the corresponding brake fluid model for accurate testing.
- Precision test and sensitive probe Equipped with a highly sensitive sensor and a 260mm foldable hose, can quickly and accurately detect DOT-3, DOT-4, DOT-5.1 brake fluid and has received the result in seconds. The outer layer of the hose is made of 304 stainless steel, which has the characteristics of oil resitance, oxidation resistance, and corrosion resistance. The foldable probe can rotate 180 degree,you can choose any angle to testing.
- Easy Instant Read 2.8 inches high resolution screen, instant display result, large display with backlight, easy and clear reading in sun or night. In addition, if the brake fluid contains too much water, the buzzer will alarm to remind you to change the brake fluid.
- Water Content Percentage OK icon indicates that the moisture content is between 0% and 2%. The brake fluid performance is fine; The icon indicates a moisture content of 2% to 3%. The brake fluid performance is OK, but it need to be detected and observed in the near future; The icon indicates that the moisture content is above 3%. The brake fluid performance is poor, it need to be replaced.
- Three Years Warranty For any quality problems. If AS502 has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 2.75 x 11.02 x 6.69 inches
See On Amazon Similar To AUTOOL Brake Fluid Tester Brake
#1
ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators, Calibrated For DOT3 DOT4 Brake Fluid
Asin: B076SC377J | Model: BFT1001 | PartNumber: BFT1001 | Ean: 0607111538110 | UPC: 607111538110
Calibrated For Cars Using Dot4 And Dot3 Brake Fluids (But Dot3 Is Almost Replaced By Dot4 Because Dot4 Has Better Performance).
Ce And Rohs Approved. Protective Cap Included.Takes 1 X Aaa/1.5V Battery (Not Included).
Only Takes Seconds To Know The Results,Very Easy To Use.
The Led Indicators Will Show Percentage Of Water In The Brake Fluid With 3 Colors Green Yellow And Red.
Features
- Test the car brake fluid quality quickly to check whether it s qualified, which can remind you to change the brake fluid when necessary to avoid traffic accident
- The LED indicators will show percentage of water in the brake fluid with 3 colors green yellow and red
- Calibrated for cars using DOT4 and DOT3 brake fluids (But DOT3 is almost replaced by DOT4 because DOT4 has better performance)
- Only takes seconds to know the results,very easy to use
- CE and RoHS approved. Protective cap included.Takes 1 x AAA/1.5V battery (not included)
- See more on Amazon...
Brand: ITEQ | Manufacturer: ITEQ
Dimensions: 0.59 x 5.91 x 0.59 inches | Weight: 0.09 Pounds
See On Amazon #2
Brake Fluid Liquid Tester Pen,1PC DOT 3 DOT 4 DOT 5.1 Brake Fluid Liquid Tester Pen, Car Diagnostic Testing Tool with 5 LED Indicators, Hydraulic Fluid Liquid Oil Moisture Analyzer
Asin: B0C53278WB
Convenient And Quick: This Brake Fluid Tester Is Easy To Use, Press The Button, Insert The Test Pen, The Indicator Is Accurate To 1%, And You Can Receive The Result In Seconds. To Save Electricity, The Test Pen Will Automatically Turn Off The Power After 20 Seconds Each Use To Save Power..
Easy To Carry: No Cable Connector Design, Small Size, Light Weight, Easy To Carry And Use. If You Encounter Any Problem When Using This Product, Please Contact Us And We Will Try Our Best To Solve It For You..
Scope Of Application: This Brake Fluid Tester Is Suitable For Testing The Moisture Content In Dot-3, Dot-4, Dot-5.1 Brake Fluid. It Is Also Very Convenient For Personal Use And This Product Is Widely Used In Personal Workshops, Repair Shops And Dealer Workshops..
Safe Driving: This Brake Fluid Tester Comes With 5 Led Indicators To Show The Percentage Of Moisture In The Brake Fluid. This Product Can Quickly Detect The Health Of The Car's Brake Fluid, Provide You With More Accurate Test Results, And Remind You To Replace The Brake Fluid When Necessary To Avoid Traffic Accidents..
Features
- High quality: This brake fluid tester is made of nickel-plated metal probe, which is resistant to oil and oxidation and not easy to corrode. The shell is black matte plastic, better anti-slip and good body texture. The change of conductivity can be used to determine the change of moisture in the brake fluid.
- Safe driving: This brake fluid tester comes with 5 LED indicators to show the percentage of moisture in the brake fluid. This product can quickly detect the health of the car's brake fluid, provide you with more accurate test results, and remind you to replace the brake fluid when necessary to avoid traffic accidents.
- Convenient and quick: This brake fluid tester is easy to use, press the button, insert the test pen, the indicator is accurate to 1%, and you can receive the result in seconds. To save electricity, the test pen will automatically turn off the power after 20 seconds each use to save power.
- Scope of application: This brake fluid tester is suitable for testing the moisture content in DOT-3, DOT-4, DOT-5.1 brake fluid. It is also very convenient for personal use and this product is widely used in personal workshops, repair shops and dealer workshops.
- Easy to carry: No cable connector design, small size, light weight, easy to carry and use. If you encounter any problem when using this product, please contact us and we will try our best to solve it for you.
- See more on Amazon...
Brand: YOGEIER | Manufacturer: YOGEIER
See On Amazon #3
Aicevoos NF Brake Fluid Tester Pen Brake Fluid Test Strips, Calibrated for DOT3 DOT4 DOT-5.1 Brake Fluid
Asin: B0C1SFRRGB
Easy Reading: High-Sensitivity Probe + Audible Alarm, Instant Display Of Results, Large Screen With Three-Color Backlight, Easy To Read The Measurement Results Whether Day Or Night..
Easy To Carry: The Case Is Well Structured, Compact And Fits Well In Your Hand. You Can Take It With You When Traveling Without Taking Up Too Much Space..
Fast Detection: The Detection Process Is Fast And Efficient, The Control Panel Is Simple And Easy To Use. Can Quickly Determine Whether The Brake Fluid Needs To Be Replaced After The Background Light Reminder..
Easy To Use: The Test Procedure Is Fast And Efficient And Has A Simple Control Panel. The Backlight Lights Green At 0%-2% Data (Brake Fluid Is Ready To Use). At 2%-3%, The Backlight Turns Yellow And The Buzzer Sounds Slowly (Brake Fluid Needs To Be Changed). The Backlight Is Red And The Buzzer Sounds Quickly When The Data Is Greater Than 3% (Brake Fluid Needs To Be Changed Immediately)..
Features
- WIDE RANGE OF APPLICATIONS: The automotive brake fluid tester is a universal device for most vehicles. It can check the condition of DOT-3, DOT-4, DOT-5.1 brake fluids as well as most synthetic brake fluids. It is extremely easy for personal use and is widely used for private workshops, repair shops and car dealerships.
- EASY TO USE: The test procedure is fast and efficient and has a simple control panel. The backlight lights green at 0%-2% data (brake fluid is ready to use). At 2%-3%, the backlight turns yellow and the buzzer sounds slowly (brake fluid needs to be changed). The backlight is red and the buzzer sounds quickly when the data is greater than 3% (brake fluid needs to be changed immediately).
- EASY READING: high-sensitivity probe + audible alarm, instant display of results, large screen with three-color backlight, easy to read the measurement results whether day or night.
- FAST DETECTION: the detection process is fast and efficient, the control panel is simple and easy to use. Can quickly determine whether the brake fluid needs to be replaced after the background light reminder.
- EASY TO CARRY: the case is well structured, compact and fits well in your hand. You can take it with you when traveling without taking up too much space.
- See more on Amazon...
Brand: Aicevoos | Manufacturer: Aicevoos
See On Amazon #4
BSBMIEQM Brake Fluid Liquid Tester, Auto Brake Diagnostic Testing Tool, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic CheckerTool for DOT3 DOT4 Brake Fluid
Asin: B08NH6FLXL | Model: 738192087454 | PartNumber: 738192087454 | Ean: 0738192087454 | UPC: 738192087454
5 Leds : 5 Led Display Lights The Percentage Of Moisture Content In The Brake Fluid, As The Test Results Are More Accurate.
Easy To Carry : Small Size ,You Can Take It In Pocket , Take 1 Aaa 1.5V Battery. Automatic Shutdown After About 15 Seconds Of Inactivity.
Usefull : Supports Dot3 Dot4 Dot5 Brake Fluid ..
Eaty To Use : Press The Button , Insert The Tester Into Reservoir For One Second Then The Tester Result Will Be Correctly Indicated By Leds.Repress The Button For Power Off..
Features
- PROTECTS YOU & YOUR CAR : Check the health status of DOT3, DOT4 car brake fluid, Brake Fluid Tester Pen can be used as a digital brake fluid tester suitable for determining brake fluid quality. It will be safe for your driving1
- EATY TO USE : Press the button , Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off.
- 5 LEDS : 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate
- USEFULL : Supports DOT3 DOT4 DOT5 brake fluid .
- EASY TO CARRY : Small size ,you can take it in pocket , take 1 AAA 1.5V battery. automatic shutdown after about 15 seconds of inactivity
- See more on Amazon...
Brand: BSBMIEQM | Manufacturer: BSBMIEQM
Dimensions: 0.59 x 5.91 x 0.59 inches
See On Amazon #5
AutoLine Pro Automotive Cap Plugs Kit - 23 Piece Set
Asin: B07WS8CSN7 | Model: SS-CPS | PartNumber: SS-CPS | Ean: 0605620262847 | UPC: 605620262847
【The Highest Quality Plastic】 Offers An Ultra-Durable Construction & Superior Fitment.
【Compatibility】 Works With All Automotive Evap / Vacuum Smoke Machines Such As Autoline Pro, Otc, Redline, Autool, And More..
【Lifetime Warranty】.
【23 Plug Set】 Ranges From 1/8"" To 4"" In Diameter (3.2 Mm To 102 Mm).
Features
- Industry Approved Specially Tapered Cap Plugs ensure a snug seal on all openings allowing you to perform an efficient leak test.
- 23 plug set Ranges from 1/8 to 4 in diameter (3.2 mm to 102 mm)
- The Highest Quality Plastic Offers an ultra-durable construction & superior fitment
- Lifetime Warranty
- Compatibility Works with ALL Automotive EVAP / Vacuum Smoke Machines such as AutoLine Pro, OTC, Redline, Autool, and more.
- See more on Amazon...
Brand: AutoLine Pro
See On Amazon #6
KHTD Brake Fluid Tester, Brake Fluid Liquid Testing Pen with 5 LED Lights, Auto Brake Diagnostic Testing Tool,Compatible with DOT3 DOT4 Brake Fluid
Asin: B0BN83RSLG | Ean: 0768477480793 | UPC: 768477480793
Easy To Read:You Can Get Results In Seconds, With The Percentage Readings Next To The Led Lights On The Brake Fluid Testing Pen, You Can Simply Read The Result Of Water Content In Your Brake Fluid. When Multiple Led Lights Are On, The Maximum Readings Shall Be The Result Of The Brake Fluid Testing..
Quick Response: We Are Committed To Offer Good Products As Well As Good Services. Feel Free To Contact Us If You Have Any Problems.
Premium Quality: This Pen Brake Fluid Tester Is Made Of Premium Nylon Raw Material More Durable To Use. （1 Aaa Battery Needed For Use, Not Included In The Pack).
Convenient Tool: This Brake Fluid Tester Pen Design Is Quite Small Size,Easy To Carry With.It's A Very Convenient Tool To Test The Moisture Of Brake Fluid For Your Auto Brake. Easy To Use ,Simply Press The Button At The Top, Dip The Probe The Testing The Water Content Of The Brake Fluid Dot 3, Dot 4 Etc..
Features
- BRAKE FLUID TESTING TYPE: The dot 3 brake fluid tester pen can also be used for testing the fluids of DOT4, DOT5.1, ENV6 & ENV4. Compatible with the most of automotive brake fluid,Very practical tool for brake fluid testing
- CONVENIENT TOOL: This brake fluid tester pen design is quite small size,easy to carry with.It's a very convenient tool to test the moisture of brake fluid for your auto brake. Easy to use ,simply press the button at the top, dip the probe the Testing the water content of the brake fluid dot 3, dot 4 etc.
- EASY TO READ:You can get results in seconds, With the percentage readings next to the LED lights on the brake fluid testing pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing.
- PREMIUM QUALITY: This pen brake fluid tester is made of premium nylon raw material more durable to use. 1 AAA battery needed for use, not included in the Pack)
- QUICK RESPONSE: we are committed to offer good products as well as good services. Feel free to contact us if you have any problems
- See more on Amazon...
Brand: KHTD | Manufacturer: KHTD
See On Amazon #7
Brake Fluid Liquid Tester,Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 Led Indicators,DOT 3 DOT 4 DOT 5.1 Brake Fluid Liquid Tester Pen for Check Engine Car Accessories
Asin: B0BGHX92V1
Easy Operation: Brake Fluid Detector Is Easy To Use, And Small Size Easy To Carry. Press The Button, Insert The Test Pen, It Only Takes A Few Seconds To Know The Result Through The Led, In Order To Save Power, This Test Pen Has Automatic Shutdown Function. It Will Automatically Turn Off The Power After 20 Seconds Each Time To Save Power..
Service Guarantee: The Brake Fluid Detector Requires 1 Lr03 Aaa 1.5V Battery. Our Package Does Not Include Batteries, Please Buy Batteries At Local Market. We Offer A One-Year Warranty. If You Cannot Confirm Its Compatibility, Or Have Any Questions, Please Feel Free To Contact Us..
Wide Application Range: Can Be Used In Most Cars. It Is Suitable For Detecting The Moisture Content In Dot-3, Dot-4, Dot-5.1 Brake Fluid. It Is Very Convenient For Personal Use And Widely Used In Individual Workshops, Repair Shops And Dealer Workshops..
Safe Driving: This Product Can Quickly Check The Health Condition Of Your Car Brake Fluid And Remind You To Change The Brake Fluid When Necessary To Avoid Traffic Accidents, So That You Are More Comfortable And Safer..
Features
- High Quality Performance: The brake fluid detector uses nickel plated metal probe, oil and oxidation resistant, not easy to corrosion. The case is matte black plastic for better skid resistance and good body texture. Metrics are accurate to 1% and results are received within seconds. Help you understand the brake fluid more clearly.
- Safe Driving: This product can quickly check the health condition of your car brake fluid and remind you to change the brake fluid when necessary to avoid traffic accidents, so that you are more comfortable and safer.
- Easy Operation: Brake fluid detector is easy to use, and small size easy to carry. Press the button, insert the test pen, it only takes a few seconds to know the result through the LED, in order to save power, this test pen has automatic shutdown function. It will automatically turn off the power after 20 seconds each time to save power.
- Wide Application Range: can be used in most cars. It is suitable for detecting the moisture content in DOT-3, DOT-4, DOT-5.1 brake fluid. It is very convenient for personal use and widely used in individual workshops, repair shops and dealer workshops.
- Service Guarantee: The brake fluid detector requires 1 LR03 AAA 1.5V battery. Our package does not include batteries, please buy batteries at local market. We offer a one-year warranty. If you cannot confirm its compatibility, or have any questions, please feel free to contact us.
- See more on Amazon...
Brand: Patonu | Manufacturer: Patonu
See On Amazon #8
Brake Fluid Liquid Tester Pen, Auto Brake Diagnostic Testing Tool with 5 LED Indicators, Hydraulic Fluid Liquid Oil Moisture Analyzer, Car Accessories Check Engine for DOT3 DOT4 DOT 5.1 Brake Fluid
Asin: B0BLGFRSB7 | Model: Brake Fluid Liquid Tester Pen | PartNumber: Brake Fluid Liquid Tester Pen
【Easy To Read And Use】: This Check Engine Is Small In Size And Easy To Carry. Press The Button And Insert It, You Can See The Result Of Water Content In Your Brake Fluid. There Are 5 Leds Indicating The Water Content In The Brake Fluid : 0% Means There Is Water Content In Brake Fluid. 1% Means H2o≤1%, Brake Fluid Is Above Standard. 2% Means H2o≤2%, Still Can Use It. 3% Means H2o≤3%, Brake Fluid Should Be Changed. 4% Means H2o≥4%, Brake Fluid Must Be Changed..
【Note】: Aaa Battery Required, One Button Operation. The Battery Is Not Included In The Package. It Is Handy And Anti Corrision But Please Be Curious Not Drop It On A Hard Surface And Be Careful With The Battery Door Or The Ears Will Snap Off. In A Word, With This Product You Can Do Your Own Annual Maintenance And Document It Instead Of Change Your Brake Fluid In Case Of Emergency..
【Multiple Usage】: This Brake Fluid Detector Is Widely Used In Most Cars, And It Is Suitable For Detecting The Moisture Content In Dot3, Dot4, Dot5.1 Brake Fluid. This Product Has No Cable Connector, It's Convenient And Easy To Use. It Can Be Used In Personal Cars Or Repair Shops. There Is A Small Suggestion, After Every Testing, Please Clean The Test Probe With Dry Cloth Or Paper..
【Safe And Practical】: This Auto Brake Diagnostic Testing Tool Can Check The Health Status Of Dot3, Dot4, Dot5 Car Brake Fluid. When It Is Time To Change The Brake Fluid, The Led Light Will Go From Green To Yellow Or Red, Reminds You To Change The Brake Fluid, Helps You To Avoid Traffic Accidents, Provide You With A Comfortable And Safe Driving..
Features
- High Quality Material : Our brake fluid liquid test pen is made of nylon material, compared with ABS material, it is anti corrision. As we all know the brake oil is pretty corrosive, when you use the shell of ABS material, the plastic part of it will be corroded and dissolved by the brake oil, and the shell will be crushed after a long time using. There's no need to worry about this problem with our product.
- Safe and Practical : This auto brake diagnostic testing tool can check the health status of DOT3, DOT4, DOT5 car brake fluid. When it is time to change the brake fluid, the LED light will go from green to yellow or red, reminds you to change the brake fluid, helps you to avoid traffic accidents, provide you with a comfortable and safe driving.
- Easy to Read and Use : This check engine is small in size and easy to carry. Press the button and insert it, you can see the result of water content in your brake fluid. There are 5 LEDs indicating the water content in the brake fluid : 0% means there is water content in brake fluid. 1% means H2O 1%, brake fluid is above standard. 2% means H2O 2%, still can use it. 3% means H2O 3%, brake fluid should be changed. 4% means H2O 4%, brake fluid must be changed.
- Multiple Usage : This brake fluid detector is widely used in most cars, and it is suitable for detecting the moisture content in DOT3, DOT4, DOT5.1 brake fluid. This product has no cable connector, it's convenient and easy to use. It can be used in personal cars or repair shops. There is a small suggestion, after every testing, please clean the test probe with dry cloth or paper.
- Note : AAA battery required, one button operation. The battery is not included in the package. It is handy and anti corrision but please be curious not drop it on a hard surface and be careful with the battery door or the ears will snap off. In a word, with this product you can do your own annual maintenance and document it instead of change your brake fluid in case of emergency.
- See more on Amazon...
Brand: AUCELI | Manufacturer: AUCELI
Dimensions: 3.00 x 1.00 x 1.00 Inches
Warranty: 0.2
See On Amazon #9
Brake Fluid Liquid Tester, Automotive Brake Fluid Content Detector, Vehicle Brake Diagnostic Testing Tool, Hydraulic Fluid Liquid Tester Pen Oil Moisture Tester Analyzer Meter for DOT3 DOT4 DOT5.1
Asin: B0BYDMJLST
【High Quality & High Sensitive】This Brake System Diagnostic Testing Tool Has A Built-In High-Quality Probe, Which Is High Sensitivity And Fast Response. The Water Content Is 0%-4% Representing No Water And The Amount Of Water Content In Turn, So That Car Owners Can Quickly Understand Whether The Water Content Of The Brake Fluid Is Qualified. It Is Made Of Abs Material, Which Is Moisture-Proof And Impact-Resistant. Automatically Shut Down If There Is No Operation For 5 Minutes..
【Convenient Pocket Clip Design】Lightweight And Compact, This Brake Fluid Tester Conveniently Clips To Your Shirt Pocket To Carry With You. It Fits Nicely And Ergonomically In Your Hand While Working. Has An Easy-To-Understand Interface, Customers Can Operate The Device With One Hand. Out Of The Box You Can Rest Assured Of The Brake Fluid Tester And Just Enjoy 3-Year Warranty Provided By Intendvision. Anything Please Feel Free To Contact Us And We Will Try Our Best To Help..
【Easy To Use】This Brake Fluid Tester Is Easy To Use. 1. After Install The Batteries, Gently Remove The Cap, Hold On The Power Key For More Than 1Second. After The Buzzer Beeps, The Screen Lights On, And Then Choose The Current Oil Type You Want To Test. 2. Insert The Test Probe Into The Brake Fluid And Immerse It In The Liquid Surface At Most 2-5Mm (Please Wipe The Probe Clean Before Or After Using, Otherwise It Will Affect The Results). 3. Check The Results Through The Display..
【Sound & Light Dual Alarm】When The Brake Fluid Tester Detects The Value Is Between 0~2%, The Backlight Turns Green, Which Means The Brake Oil Can Still Be Used. When The Value Is Tested Between 2~3%, The Backlight Is Yellow, And The Buzzer Buzzes Slowly, Please Change The Brake Oil. When The Detected Value Is Above 3%，The Backlight Turns Red, And The Buzzer Buzzes Quickly, Please Change The Brake Oil Immediately. Tips: Please Wipe The Probe Clean, Otherwise It Will Affect The Results..
Features
- 3 Oil Type Detection Brake Fluid Tester This brake fluid tester can be used to detect brake oil DOT3, DOT4, DOT5.1. DOT3 is the most common type of brake fluid used by daily drivers and it is also the default brake oil type when the brake fluid tester power on; DOT4 has a higher boiling point and has found its place in racing vehicles and police cars. DOT5 mainly used in special vehicles such asracing cars, but rarely used in passenger cars.
- Sound & Light Dual Alarm When the brake fluid tester detects the value is between 0~2%, the backlight turns green, which means the brake oil can still be used. When the value is tested between 2~3%, the backlight is yellow, and the buzzer buzzes slowly, please change the brake oil. When the detected value is above 3% the backlight turns red, and the buzzer buzzes quickly, please change the brake oil immediately. Tips: please wipe the probe clean, otherwise it will affect the results.
- High Quality & High Sensitive This brake system diagnostic testing tool has a built-in high-quality probe, which is high sensitivity and fast response. The water content is 0%-4% representing no water and the amount of water content in turn, so that car owners can quickly understand whether the water content of the brake fluid is qualified. It is made of ABS material, which is moisture-proof and impact-resistant. Automatically shut down if there is no operation for 5 minutes.
- Easy to Use This brake fluid tester is easy to use. 1. After install the batteries, gently remove the cap, hold on the power key for more than 1second. After the buzzer beeps, the screen lights on, and then choose the current oil type you want to test. 2. Insert the test probe into the brake fluid and immerse it in the liquid surface at most 2-5mm (please wipe the probe clean before or after using, otherwise it will affect the results). 3. Check the results through the display.
- Convenient Pocket Clip Design Lightweight and compact, this brake fluid tester conveniently clips to your shirt pocket to carry with you. It fits nicely and ergonomically in your hand while working. Has an easy-to-understand interface, customers can operate the device with one hand. Out of the box you can rest assured of the Brake Fluid Tester and just enjoy 3-Year Warranty provided by Intendvision. Anything please feel free to contact us and we will try our best to help.
- See more on Amazon...
Brand: intendvision | Manufacturer: intendvision
See On Amazon #10
28 Pcs Automotive Cap Plugs Kit 0.11" to 4.37" Fit for AutoLine Pro, Autool, MR CARTOOL, OTC, Plastic Tapered Wide Thick Flange Hose Caps
Asin: B0BL3HHL1K | Model: Automotive Cap Plugs | PartNumber: Automotive Cap Plugs
Good Sealing Performance: The Conical Cap Plug Is Specially Designed For Automobile Leakage Test To Ensure That The Opening Is Tightly Sealed, And No Dirt Can Enter While The Sealing Performance Is Good.
Package Includes: You Will Receive 28 X Automotive Cap Plugs Kit. If You Have Any Questions About Our Products, Please Contact Us Immediately, And We Will Do Our Best To Solve The Problem For You.
Durable Material: Made Of High Quality Thick Plastic, Durable, Good Performance, Easy To Disassemble And Install, Can Be Recycled.
Various Sizes: 28 Pcs Cap Plugs Have Diameters Ranging From 0.11In (2.95Mm) To 4.37In (111Mm).
Features
- Fitment: Automotive cap plugs fit for AutoLine Pro, Autool, MR CARTOOL, OTC and more
- Various Sizes: 28 Pcs cap plugs have diameters ranging from 0.11in (2.95mm) to 4.37in (111mm)
- Good Sealing Performance: The conical cap plug is specially designed for automobile leakage test to ensure that the opening is tightly sealed, and no dirt can enter while the sealing performance is good
- Durable Material: Made of high quality thick plastic, durable, good performance, easy to disassemble and install, can be recycled
- Package Includes: You will receive 28 x Automotive Cap Plugs Kit. If you have any questions about our products, please contact us immediately, and we will do our best to solve the problem for you
- See more on Amazon...
Brand: Qnbes | Manufacturer: YouVbeen
Warranty: Not applicable.
See On Amazon #11
Ohleats Brake Fluid Liquid Tester Pen with 5 LED Indicators, DOT 3 DOT 4 DOT 5.1 Brake Fluid Liquid Tester Pen, Auto Brake Diagnostic Testing Tool Analyzer, Universal Car Accessories
Asin: B0CTML44S6 | Model: Brake Fluid Liquid Tester Pen | PartNumber: Brake Fluid Liquid Tester Pen
【Easy To Use】: The Brake Fluid Tester Pen Is Easy To Use With Its Intuitive Design. Simply Insert The Metal Probe Into The Brake Fluid, After A Few Seconds, The Corresponding Led Light Will Light Up And Display The Result. After The Test Is Completed, The Test Pen Will Automatically Close After 12 Seconds..
【Package Includes】: You Will Receive A Brake Fluid Tester, Which Is Suitable For Determining Brake Fluid Quality. It Is Compatible With Aaa Batteries, But Please Note That The Battery Is Not Included In The Package. So You Should Prepare It By Yourself. In Order To Save Power And To Prevent Corrosion, Please Take Out The Battery After The Test And Clean The Detector..
【Premium Material】: This Brake Fluid Tester Is Made Of Brass-Plated Metal, Which Is Resistant To Oil, Oxidation And Corrosion. The Shell Is Black Matte Plastic, Better Anti-Slip And Good Body Texture. The Change Of Conductivity Can Be Used To Determine The Change Of Moisture In The Brake Fluid..
【5 Led Lights】: This Brake Fluid Tester Comes With 5 Led Indicators To Show The Percentage Of Moisture In The Brake Fluid. It Will Show Percentage Of Water In The Brake Fluid With 3 Colors, Green, Yellow And Red. Red Indicates The Brake Fluid Needs Immediate Replacement. Green Represents Good Condition, And Yellow Indicates The State Is Acceptable But Soon Require Replacement..
Features
- Quick & Convenient : The brake fluid moisture tester can widely test the percentage of moisture in DOT3, DOT4, DOT5.1 brake fluid. It can check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time. It's extremly convenient for personal use and broadly applied in individual workshops, repair factories and dealer workshops.
- 5 LED Lights : This brake fluid tester comes with 5 LED indicators to show the percentage of moisture in the brake fluid. It will show percentage of water in the brake fluid with 3 colors, green, yellow and red. Red indicates the brake fluid needs immediate replacement. Green represents good condition, and yellow indicates the state is acceptable but soon require replacement.
- Easy to Use : The brake fluid tester pen is easy to use with its intuitive design. Simply insert the metal probe into the brake fluid, after a few seconds, the corresponding LED light will light up and display the result. After the test is completed, the test pen will automatically close after 12 seconds.
- Premium Material : This brake fluid tester is made of brass-plated metal, which is resistant to oil, oxidation and corrosion. The shell is black matte plastic, better anti-slip and good body texture. The change of conductivity can be used to determine the change of moisture in the brake fluid.
- Package Includes : You will receive a brake fluid tester, which is suitable for determining brake fluid quality. It is compatible with AAA batteries, but please note that the battery is not included in the package. So you should prepare it by yourself. In order to save power and to prevent corrosion, please take out the battery after the test and clean the detector.
- See more on Amazon...
Brand: Ohleats | Manufacturer: Ohleats
See On Amazon #12
ZKTOOL New Upgraded Version Brake Fluid Tester Pen, Test DOT3 DOT4 DOT5.1 ENV6 ENV4 Brake fluids,Brake Fluid Moisture Analyzer with 5 LED Indicators,Brake Fluid Liquid Tester Pen
Asin: B0982Z7TRL | Ean: 0766382655893 | UPC: 766382655893
Convenience: The Brake Fluid Tester Tool Is Simple And Convenient. It Only Takes A Few Seconds To Check The Quality Of Car Brake Fluid. It Is Easy To Operate For Many New Car Owners. At The Same Time, It Is A Must-Have Vehicle Tool Because Of Its Small Size And Easy Portability. And It Will Automatically Shut Down If You Don't Use It Within 12 Seconds, Saving Your Battery. (Requires 1 X Aaa/1.5V Battery, Not Included).
Operation: Long Press The Top Button To Switch The Type Of Brake Fluid, The Initial Default Is Dot3, And Each Time The Led From Low To High Turns On Three Times, One Brake Fluid Is Switched. If You Want To Use One Of The Brake Fluids, When The Led Light Is In The Brake Fluid Type Gear, Please Release The Top Button When It Flashes Twice, And Insert The Bottom Sensor Plug Into The Brake Fluid (Brake Fluid Test Pen 2/3 ), And You Will Understand Percentage Of Water In Your Vehicle’S Brake Fluid.
Quality: The New Brake Fluid Liquid Tester Pen Is A Perfect Tool That We Updated After Many Studies Of Similar Products On The Market. It Reads More Accurately During The Test. At The Same Time, Its Shell Material Is Made Of High-Quality Nylon, Compared To Abs Materials. The Product Is More Corrosion Resistant And Has A Longer Service Life..
Led Lights: 5 Led Lights Indicate The Percentage Of Water In The Brake Fluid In Three Colors Of Green, Yellow, And Red. From Low To High, They Are Green (0%), Green-Yellow (<1%), Green-Yellow-Yellow (1 %-2%), Green Yellow Yellow Red (2%-4%), Green Yellow Yellow Red Red (>4%). Easily Grasp The Percentage Of Water In The Brake Fluid, And Consider Whether To Replace The Brake Fluid..
Features
- Function: The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid; the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast.
- LED lights: 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green (0%), green-yellow (<1%), green-yellow-yellow (1 %-2%), green yellow yellow red (2%-4%), green yellow yellow red red (>4%). Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid.
- Convenience: The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. (Requires 1 x AAA/1.5V battery, not included)
- Quality: The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately during the test. At the same time, its shell material is made of high-quality nylon, compared to ABS materials. The product is more corrosion resistant and has a longer service life.
- Operation: Long press the top button to switch the type of brake fluid, the initial default is DOT3, and each time the LED from low to high turns on three times, one brake fluid is switched. If you want to use one of the brake fluids, when the LED light is in the brake fluid type gear, please release the top button when it flashes twice, and insert the bottom sensor plug into the brake fluid (brake fluid test pen 2/3 ), and you will understand percentage of water in your vehicle s brake fluid
- See more on Amazon...
Brand: ZKTOOL | Manufacturer: ZKTOOL
Dimensions: 1.42 x 0.79 x 2.64 inches | Weight: 0.13 pounds
Warranty: two year
See On Amazon #13
KINGBOLEN Brake Fluid Tester with 5 LED Indicators,DOT 3 DOT 4 DOT 5.1 Brake Fluid Liquid Tester Pen for Check Engine Automotive Accessories,Auto Brake Diagnostic Testing Tool Oil Moisture Analyzer
Asin: B09YRL2HKS | Ean: 0756029669789 | UPC: 756029669789
【5 Led Indicators Quick Calibration】Brake Fluid Detection Pen Is Based On The Change In Conductivity To Determine The Moisture Change Brake Fluid. It Shows Clearly The Extent Of Moisture Contained By The Light-Emitting Diode.The Led Indicators Will Show Percentage Of Water In The Brake Fluid With 3 Colors--Green,Yellow And Red.Red Indicates The Brake Fluid Needs Immediate Replacement, Green Represents Good Condition, Yellow Indicates The State Is Acceptable But Soon Replaced..
【Worry-Free Service】Brake Fluid Pen Tester Outer Shell Is Matte Black Plastic , Better Skid Resistance, Body With Good Texture, Compact Size, Perfect Hand Feeling. It Take 1 Lr03 Aaa 1.5V Battery.By The Way,The Package Doesn't Include Battery, Please Buy Batteries In Your Local Market. And We Offer One Year Warranty. If You Cannot Confirm Its Compatibility, Please Feel Free To Consult Us..
【Note】This Brake Fluid Liquid Tester Pen Applies To Detection Of The Dot3, Dot4, Dot5.1 Brake Fluid Performance. Using The Ac Pulse Testing Method,Greatly To Reduce The Polarization Phenomenon During The Brake Fluid Testing. The Test Result Is Accurate And The Measuring Speed Is Fast. In Order To Save Power, Please Take Out The Battery After The Test And Clean The Detector.This Can Better Prevent Corrosion And Protect Brake Fluid Tester..
【Support Dot3, Dot4, Dot5.1 Brake Fluid】Quick And Easy Method To Accurately Gauge The Moisture Content Of All Types Of Brake Fluid. Press The Button , Insert The Tester Into Reservoir ,Only Takes Seconds To Know The Results By Leds,Very Easy To Use.In Order To Save Power,This Test Pen Has The Automatic Shutdown Function. It Will Automatically Turn Off The Power To Save Power 20 Seconds After Starting Up Every Time..
【Accurate To 1% High Precision Sensor】Kingbolen Brake Fluid Test Strips Has Nickel Plated Metal Probe, Which Is Oil-Proof And Oxidation-Proof, Not Easily Corrosive.Metrics Is Accurate To 1%, Quickly And Accurately Detect Dot3, Dot4, Dot5.1 Brake Fluid Pen And Has Received The Result In Seconds.To Help You Get A Clearer Picture Of Brake Fluid..
Features
- Useful Brake Fluid Tester KINGBOLEN Brake Fluid Tester can be used on most cars; It is easy-to-use and suitable for testing the water percentage in the DOT-3, DOT-4, DOT-5.1 brake fluid. Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable and safe. It's extremly convenient for personal use and broadly applied in individual workshops, repair factories and dealer workshops.
- Accurate to 1% High Precision Sensor KINGBOLEN Brake Fluid Test Strips has nickel plated metal probe, which is oil-proof and oxidation-proof, not easily corrosive.Metrics is accurate to 1%, quickly and accurately detect DOT3, DOT4, DOT5.1 brake fluid pen and has received the result in seconds.To help you get a clearer picture of brake fluid.
- 5 LED Indicators Quick Calibration Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode.The LED indicators will show percentage of water in the brake fluid with 3 colors--Green,Yellow and Red.Red indicates the brake fluid needs immediate replacement, Green represents good condition, Yellow indicates the state is acceptable but soon replaced.
- Support DOT3, DOT4, DOT5.1 brake fluid Quick and easy method to accurately gauge the moisture content of all types of brake fluid. Press the button , Insert the tester into reservoir ,Only takes seconds to know the results by LEDs,very easy to use.In order to save power,this test pen has the automatic shutdown function. It will automatically turn off the power to save power 20 seconds after starting up every time.
- WORRY-FREE SERVICE Brake Fluid Pen Tester outer shell is Matte black plastic , Better skid resistance, Body with good texture, compact size, perfect hand Feeling. It take 1 LR03 AAA 1.5V battery.By the way,The package doesn't include battery, please buy batteries in your local market. And We offer one year warranty. If you cannot confirm its compatibility, please feel free to consult us.
- NOTE This Brake Fluid Liquid Tester Pen applies to detection of the DOT3, DOT4, DOT5.1 brake fluid performance. Using the AC pulse testing method,greatly to reduce the polarization phenomenon during the brake fluid testing. The test result is accurate and the Measuring Speed is fast. In order to save power, please take out the battery after the test and clean the detector.This can better prevent corrosion and protect Brake Fluid Tester.
- See more on Amazon...
Brand: KINGBOLEN | Manufacturer: KINGBOLEN
Dimensions: 6.85 x 1.70 x 0.30 inches
Warranty: 30 days warranty
See On Amazon #14
Augeny Brake Fluid Liquid Tester Pen, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators to Test DOT3 DOT4 DOT5.1 Brake Fluid, Auto Brake Diagnostic Testing Tool
Asin: B0CLQY2QG3 | Model: Brake Fluid Liquid Tester Pen | PartNumber: Brake Fluid Liquid Tester Pen
【Usage Method】: This Brake Fluid Tester Is Easy To Use. Press The Power Button And The Green Led Light Will Light Up Indicating That It Is Ready For Use. Insert The Metal Probe Into The Brake Fluid, After A Few Seconds, The Corresponding Led Light Will Light Up And Display The Result. After The Test Is Completed, The Test Pen Will Automatically Close After 12 Seconds..
【Widely Used】: It Is Very Convenient For Personal Use And This Product Is Also Widely Used In Personal Workshops, Repair Shops And Dealer Workshops. This Product Is Compatible With Aaa Batteries, But Please Note That The Battery Is Not Included In The Package, So Please Prepare It Yourself. In Order To Save Power And To Prevent Corrosion, Please Take Out The Battery After The Test And Clean The Detector..
【Water Content Judgment】: This Brake Fluid Tester Comes With 5 Led Indicators To Show The Percentage Of Moisture In The Brake Fluid. High Moisture Content Will Lead To A Lower Boiling Point, Affecting Brake Performance. Red Light Means The Brake Fluid Needs To Be Replaced, Green Light Means It Is In Good Condition, And Yellow Light Means It Is In Fair Condition..
【Scope Of Application】: This Brake Fluid Tester Is Suitable For Testing The Moisture Content In Dot-3, Dot-4, Dot-5.1 Brake Fluid. It Can Quickly Detect The Health Of The Car's Brake Fluid, Provide You With More Accurate Test Results. It's Small And Lightweight, Easy To Carry, And You Can Use It Anytime..
Features
- High Quality Material : This brake fluid tester is made of brass-plated metal, which is resistant to oil, oxidation and corrosion. The shell is black matte plastic, better anti-slip and good body texture. The change of conductivity can be used to determine the change of moisture in the brake fluid.
- Scope of Application : This brake fluid tester is suitable for testing the moisture content in DOT-3, DOT-4, DOT-5.1 brake fluid. It can quickly detect the health of the car's brake fluid, provide you with more accurate test results. It's small and lightweight, easy to carry, and you can use it anytime.
- Usage Method : This brake fluid tester is easy to use. Press the power button and the green LED light will light up indicating that it is ready for use. Insert the metal probe into the brake fluid, after a few seconds, the corresponding LED light will light up and display the result. After the test is completed, the test pen will automatically close after 12 seconds.
- Water Content Judgment : This brake fluid tester comes with 5 LED indicators to show the percentage of moisture in the brake fluid. High moisture content will lead to a lower boiling point, affecting brake performance. Red light means the brake fluid needs to be replaced, green light means it is in good condition, and yellow light means it is in fair condition.
- Widely Used : It is very convenient for personal use and this product is also widely used in personal workshops, repair shops and dealer workshops. This product is compatible with AAA batteries, but please note that the battery is not included in the package, so please prepare it yourself. In order to save power and to prevent corrosion, please take out the battery after the test and clean the detector.
- See more on Amazon...
Brand: Augeny | Manufacturer: Augeny
Warranty: 0.2
See On Amazon #15
Kaishengyuan Automotive Cap Plugs Kit EVAP Vacuum Smoke Machines Accessories Compatible with AutoLine Pro, Autool, MR CARTOOL, OTC, 0.11" to 4.37" Plastic Tapered Wide Thick Flange Hose Caps- 30Pcs
Asin: B09ZQFJW6Q
【High Quality Plastic】: Automotive Cap Plugs Offers An Ultra-Solid Construction & Superior Fitment, Solid Construction Will Withstand Repeated Use..
【Compatibility】: Works With All Automotive Vacuum Smoke Machines Such As Otc, Redline, Autool And More..
【Easy To Use】: These Caps And Plugs Are Used To Seal The Intake Ducting Leak Of An Automotive Engine Being Tested. Easy Installation And Removal And 100% Quality Guarantee..
【30 Plug Sets】: Diameter Size Of Cap Plugs Is Ranges From 0.11" To 4.37" In Diameter (2.95 Mm To 111 Mm), It Fits Most Applications..
Features
- Useful Cap Plugs : Specially tapered cap plugs ensure a snug seal on all openings allowing you to perform an efficient leak test.
- 30 Plug Sets : Diameter size of cap plugs is ranges from 0.11 to 4.37 in diameter (2.95 mm to 111 mm), it fits most applications.
- High Quality Plastic : Automotive cap plugs offers an ultra-solid construction & superior fitment, solid construction will withstand repeated use.
- Easy to Use : These caps and plugs are used to seal the intake ducting leak of an automotive engine being tested. Easy installation and removal and 100% quality guarantee.
- Compatibility : Works with ALL Automotive Vacuum Smoke Machines such as OTC, Redline, Autool and more.
- See more on Amazon...
Brand: Kaishengyuan | Manufacturer: Kaishengyuan
See On Amazon #16
HT662 Brake Fluid Liquid Tester Pen ABS DOT3 DOT4 DOT5.1 Automotive Brake Fluid Content Detector Auto Vehicle Brake Diagnostic Testing Tool
Asin: B0BTZ3D7R5 | Model: WALFRONT05nt7gwvyo | PartNumber: WALFRONT05nt7gwvyo
Technical Parameters: Detection Range From 0%~4%, Error Is ±0.3%, Detection Type Contain Dot3, Dot4, Dot5.1.
Accurate And Reliable: Original High Accuracy Probe Is Made Of Excellent Materials, To Ensure Outstanding Performance.
Moisture Change Measurement: The Brake Fluid Detection Pen Is Based On The Change Of Electrical Conductivity To Measure The Moisture Change Of Brake Fluid.
Quick Distinguish: The Water Content Is 0%‑4% Representing No Water And The Amount Of Water Content In Turn, So That Car Owners Can Quickly Understand Whether The Water Content Of The Brake Fluid Is Qualified..
Features
- SCRATCH RESISTANT ABS: Using excellent ABS material, possess impact resistance, scratch resistance, environmentally friendly
- QUICK DISTINGUISH: The water content is 0% 4% representing no water and the amount of water content in turn, so that car owners can quickly understand whether the water content of the brake fluid is qualified.
- TECHNICAL PARAMETERS: Detection range from 0%~4%, error is 0.3%, detection type contain DOT3, DOT4, DOT5.1
- MOISTURE CHANGE MEASUREMENT: The brake fluid detection pen is based on the change of electrical conductivity to measure the moisture change of brake fluid
- ACCURATE AND RELIABLE: Original high accuracy probe is made of excellent materials, to ensure outstanding performance
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #17
Automotive Smoke Leak Detector Tester EVAP Smoke Machine with Dual Mode
Asin: B09FYZBJD3 | Ean: 6972697783150
【Flow Meter & Pressure Gauge】According To The Pressure Of The Detection Pipeline, It Is Controlled With A Flowmeter To More Effectively Protect The Pipeline From Damage. By Observing The Pressure Gauge, You Can Determine Whether The Pipeline Is Leaking More Quickly And Accurately. Usually The Pressure Gauge Continues To Rise, Indicating That There Is No Problem With The Pipeline. If The Pressure Gauge Continues To Decrease, Explain That The Pipeline Leak Needs To Be Repaired..
【Wide Testing Range】Built-In Air Pump,The Smoke Leak Detector Can Do Smoke Testing Of Multiple Systems, Such As Evap Systems, Intake Systems, Cooling / Egr /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo Leaks.Applicable Cars, Motorcycles, Snowmobiles, Off-Road Vehicles, Atvs, Light Trucks And Speedboats Boats..
【Three Years Warranty And Lifelong Maintenance】For The Damage Caused By Non-Human Factors, Autool Promises To Resend The Parts For Free Within 3 Years. For Any Demand, We Warmly Welcome You To Tell Us, And We Will Reply You As Soon As Possible Within 24 Hours..
【Evap Detection】American Cars That Began Production In 1996 Are Equipped With Evap Service Ports; In Most American Cars, The Evap Service Port Is Usually Located In The Engine Compartment, But The Evap Service Port Of Some Special Models May Be Located In Other Locations. Open The Plastic Cover Of The Evap Service Port, Then Use The Spool Wrench To Remove The Check Valve Clockwise, Then Install The Evap Service Port Adapter, And Introduce Smoke From The Port Into The Evap Leak Detection System..
【Air Mode & Smoke Mode】Built-In Air Pump And Smoke Generator, So It Does Not Rely On Additional Air Machine, Perfect For Mobile Automotive Repair! The Smoke Can Be Produced Within 7-15 Seconds, Dramatically Reducing Diagnostic Time. Smoke Output Value: 1-6L/Min..
Features
- Why Need It Car Smoke Leak Detector is a professional auto pipe leak detect tool. It will help us position cars motorcycles leakage on the pipe systems quickly and exactly
- Air Mode & Smoke Mode Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 1-6L/min.
- Flow Meter & Pressure Gauge According to the pressure of the detection pipeline, it is controlled with a flowmeter to more effectively protect the pipeline from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired.
- EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
- Wide Testing Range Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
- Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
Brand: AUTOOL | Manufacturer: AUTOOL
Dimensions: 6.00 x 10.00 x 6.00 inches
See On Amazon #18
Brake Fluid Liquid Tester Pen, Brake Fluid Tester with 5 LED Indicators, Brake Fluid Liquid Testing Pen for DOT 3 DOT 4 DOT 5.1 Vehicle, Auto Tester Tool, Diagnostic Testing Tool
Asin: B0BL6SVG2B
Extensive Application: Can Be Used In Most Cars. It Is Suitable For Detecting The Moisture Content In Dot-3, Dot-4, Dot-5.1 Brake Fluid. Widely Applied In Individual, Repair Factories And Dealer Workshops..
Easy To Carry: Designed Without Cable Connector, Portable And Light Weight, Convenient To Carry And Use. If You Encounter Any Problems When Using This Product, Please Contact Us And We Will Try Our Best To Solve The Problem For You..
Simple Design: 5 Led Indicators Show The Percentage Of Water In The Brake Fluid. The Brake Fluid Tester Pen Is Compact And Portable, Provides More Accurate Test Result, Oil-Proof And Oxidation-Proof, With Good Condition And High Precision..
Convenience: Brake Fluid Detection Pen Is Easy To Use, And Small Size Easy To Carry. Press The Button , Insert The Tester Into Reservoir ,Only Takes Seconds To Know The Results By Leds,Very Easy To Use..
Features
- High Quality Performance: Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. The Brake fluid detection pen uses nickel plated metal probe, oil and oxidation resistant, not easy to corrosion. The case is matte black plastic for better skid resistance and good body texture.
- Convenience: Brake fluid detection pen is easy to use, and small size easy to carry. Press the button , Insert the tester into reservoir ,Only takes seconds to know the results by LEDs,very easy to use.
- Extensive Application: Can be used in most cars. It is suitable for detecting the moisture content in DOT-3, DOT-4, DOT-5.1 brake fluid. widely applied in individual, repair factories and dealer workshops.
- Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, provides more accurate test result, oil-proof and oxidation-proof, with good condition and high precision.
- Easy to Carry: Designed without cable connector, portable and light weight, convenient to carry and use. If you encounter any problems when using this product, please contact us and we will try our best to solve the problem for you.
- See more on Amazon...
Brand: NTNEV | Manufacturer: NTNEV
See On Amazon #19
Powerbuilt Brake Fluid Tester, LED Light Quality Indicators for Braking Systems, Test DOT 4 Water Content, Pocket Sized 647626
Asin: B00OCEGTZA | Model: 647626 | PartNumber: 647626 | Ean: 0028907411187 | UPC: 028907411187
The Led Indicators Will Identify The Percentage Of Water Content In The Brake Fluid.
Works With Dot 4 Brake Fluid.
Led Lights Indicate Brake Fluid Quality.
Includes Battery And Protective Cap.
Easy To Use - Simply Power Up, Dip Probes Into Brake Fluid And Read Results.
This Device Is For Checking The Quality Of The Brake Fluid In The Reservoir And In The Lines.
Features
- Brake Fluid Tester
- This Device Is for checking the quality of the Brake Fluid In the Reservoir and In the lines
- The Led Indicators will Identify the percentage of water content In the Brake Fluid
- Easy to use - simply power up, dip probes into brake fluid and read results
- LED lights indicate brake fluid quality
- Includes battery and protective cap
- Works with DOT 4 brake fluid
- See more on Amazon...
First Available: 10/10/2014
Brand: Powerbuilt | Manufacturer: Powerbuilt
Dimensions: 8.63 x 1.00 x 2.75 Inches | Weight: 0.13 pounds
Warranty: Unlimited 1 year
See On Amazon
Looking For Something Else?
Search