TEKTON 10 mm Ball End Hex L-Key | KLX82100
Asin: B0CDNKDKKB | Model: KLX82100 | PartNumber: KLX82100 | Ean: 0020209063279 | UPC: 020209063279
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.20-Degree Ball Angle Increases Access – Our L-Keys Implement A Steep Ball-End Angle That Increases Your Ability To Access Fasteners While Still Maintaining Sufficient Strength.
Clear Markings – With The Exception Of The Smallest Sizes, Tekton L-Key Sizes Are Marked In Two Ways–Both With A High-Visibility Laser Marking And A Stamped Marking (Sizes 0.050 Inch And 1.3 Mm Are Too Small To Laser Mark, Sizes 0.050 Inch, 1/16 Inch, 5/64 Inch, 1.3 Mm, 1.5 Mm, And 2 Mm Are Too Small To Stamp).
Maximum Torque Strength – We Make Our L-Keys With 8660 Nickel Chromium Molybdenum Steel That's Heat-Treated To Hrc 54-58 To Produce Tools That Are Hard, But Not Brittle; As A Result, The Maximum Torque Of The L-Keys Consistently Exceeds The Asme Standards For Minimum Torsion Load And The Iso Standards For Minimum Proof Torque.
Tight Fit With Fasteners – We Precisely Manufacture Our Hex Key Geometry On The Large End Of The Applicable Range, Resulting In Less Slop In Fasteners.
Features
- High Leverage We designed the keys to be longer in the largest sizes to increase leverage where it matters
- Tight Fit with Fasteners We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners
- 20-Degree Ball Angle Increases Access Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength
- Maximum Torque Strength We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque
- Clear Markings With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1/16 inch, 5/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.40 x 8.90 x 1.60 inches | Weight: 0.39 pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon Similar To TEKTON 10 mm Ball End
#1
TEKTON 3/8 Inch Drive x 1 Inch Mini Extension | SHA11101
Asin: B0B1N7FG5V | Model: SHA11101 | PartNumber: SHA11101 | Ean: 0020209994436 | UPC: 020209994436
Beveled Drive End Helps Guide Extension Smoothly Onto Drive Tool.
Radiused Corners Inside The Drive Avoid Stress Concentrations That Can Cause Cracking.
Spring-Loaded Retaining Ball Latches Into Sockets And Holds Them Securely In Place.
Four Detent Grooves Offer A Secure Connection With The Drive Tool.
Polished, Chrome-Plated Finish Easily Wipes Clean And Is Highly Resistant To Corrosion.
Features
- Use the mini extension by itself in tight spaces or add it onto other extensions to achieve just the right amount of reach
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
- Beveled drive end helps guide extension smoothly onto drive tool
- Four detent grooves offer a secure connection with the drive tool
- Radiused corners inside the drive avoid stress concentrations that can cause cracking
- Spring-loaded retaining ball latches into sockets and holds them securely in place
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.70 x 1.10 x 0.70 inches
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #2
TEKTON 3/8 Inch Drive x 10 mm Deep 6-Point Socket | SHD13110
Asin: B07R6FPRV6 | Model: SHD13110 | PartNumber: SHD13110 | Ean: 0020209029848 | UPC: 020209029848
Deep-Length Sockets Reach Into Wells And Accommodate The Excess Threads Of Longer Shafts.
Beveled Inner Rim Of The Socket Opening Helps Guide It Smoothly Onto Fasteners.
Polished, Chrome-Plated Finish Easily Wipes Clean And Is Highly Resistant To Corrosion.
Four Detent Grooves Provide A Secure Connection With The Drive Tool.
Extra-Large Die-Stamped Size Markings Are Easy To Read And Can’T Wear Off.
Socket Geometry Is Designed To Apply Force To Flat Sides Of Fasteners And Not The Corners, Preventing Round-Off.
Features
- 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
- Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
- Deep-length sockets reach into wells and accommodate the excess threads of longer shafts
- Extra-large die-stamped size markings are easy to read and can t wear off
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
- Four detent grooves provide a secure connection with the drive tool
- Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.70 x 2.50 x 0.70 Inches | Weight: 0.00 pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #3
TEKTON 10 mm Combination Wrench | 18279
Asin: B00Q01O8CO | Model: 18279 | PartNumber: 18279 | Ean: 0020209182796 | UPC: 020209182796
Box End Opening Is Designed To Grip Flat Sides Of Fastener Heads, Not Corners, To Prevent Round-Off.
Made Of Premium Chrome Vanadium Steel With A Mirror Chrome Finish.
12-Point Box End Doubles The Access Angles Of A 6-Point And Is Offset 15 Degrees To Create Clearance For Fingers.
Features
- Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces
- 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers
- Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off
- Made of premium chrome vanadium steel with a mirror chrome finish
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.40 x 6.40 x 0.90 inches | Weight: 0.14 pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #4
TEKTON Ball End Hex and Star L-Key Set with Holder, 41-Piece (0.050-3/8 in., 1.3-10 mm, T6-T50) | KEY91002
Asin: B0CDNQSGV2 | Model: KLX91203 | PartNumber: KLX91203 | Ean: 0020209060063 | UPC: 020209060063
Tight Fit With Fasteners – We Precisely Manufacture Our Hex Key Geometry On The Large End Of The Applicable Range, Resulting In Less Slop In Fasteners.
Maximum Torque Strength – We Make Our L-Keys With 8660 Nickel Chromium Molybdenum Steel That's Heat-Treated To Hrc 54-58 To Produce Tools That Are Hard, But Not Brittle; As A Result, The Maximum Torque Of The L-Keys Consistently Exceeds The Asme Standards For Minimum Torsion Load And The Iso Standards For Minimum Proof Torque.
Clear Markings – With The Exception Of The Smallest Sizes, Tekton L-Key Sizes Are Marked In Two Ways–Both With A High-Visibility Laser Marking And A Stamped Marking (Sizes 0.050 Inch And 1.3 Mm Are Too Small To Laser Mark, Sizes 0.050 Inch, 1/16 Inch, 5/64 Inch, 1.3 Mm, 1.5 Mm, And 2 Mm Are Too Small To Stamp).
20-Degree Ball Angle Increases Access – Our L-Keys Implement A Steep Ball-End Angle That Increases Your Ability To Access Fasteners While Still Maintaining Sufficient Strength.
High Leverage – We Designed The Keys To Be Longer In The Largest Sizes To Increase Leverage Where It Matters.
Features
- Includes 13-pc. ball end hex L-key wrenches: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.; 15-pc. ball end hex L-key wrenches: 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm; 13-pc. star L-key wrenches: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50; Black hex key holder; Red hex key holder; Gray star key holder
- High Leverage We designed the keys to be longer in the largest sizes to increase leverage where it matters
- Tight Fit with Fasteners We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners
- 20-Degree Ball Angle Increases Access Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength
- Maximum Torque Strength We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque
- Clear Markings With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways both with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1/16 inch, 5/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 1.75 x 9.75 x 4.55 inches
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #5
TEKTON 3/8 Inch Drive Long Hex Bit Socket Set, 18-Piece (1/8-3/8 in., 3-10 mm) | SHB91303
Asin: B07RVCSP7J | Model: SHB91303 | PartNumber: SHB91303 | Ean: 0020209036181 | UPC: 020209036181
6-Sided Hexagonal Tip Is Machined To Precise Tolerances For An Exact Fit With Hex Fasteners.
Large, Clear Die-Stamped Size Marking Is Easy To Read And Can’T Wear Off.
Extra-Long Bits Allow You To Reach Deep Into Especially Narrow, Recessed Areas.
S2 Steel Bit Is Press-Fit Into The Socket For A Straight, Permanent Connection That Can't Loosen Over Time.
Features
- Includes 8-pc. 3/8 in. drive long inch hex bit sockets: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8 in.; 10-pc. 3/8 in. drive long metric hex bit sockets: 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm; Storage case
- S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
- 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners
- Extra-long bits allow you to reach deep into especially narrow, recessed areas
- Large, clear die-stamped size marking is easy to read and can t wear off
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 2.40 x 10.70 x 6.60 Inches | Weight: 3.50 pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #6
TEKTON 3/8 Inch Drive Long Hex Bit Socket Set, 19-Piece (1/8-3/8 in., 3-10 mm) | SHB91315
Asin: B0BZX18KR7 | Model: SHB91315 | PartNumber: SHB91315 | Ean: 0020209990636 | UPC: 020209990636
6-Sided Hexagonal Tip Is Machined To Precise Tolerances For An Exact Fit With Hex Fasteners.
Polished, Chrome-Plated Finish Easily Wipes Clean And Is Highly Resistant To Corrosion.
Beveled Inner Rim Of The Socket Opening Helps Guide It Smoothly Onto Fasteners.
Large, Clear Die-Stamped Size Marking Is Easy To Read And Can’T Wear Off.
Four Detent Grooves Provide A Secure Connection With The Drive Tool.
Extra-Long Bits Allow You To Reach Deep Into Especially Narrow, Recessed Areas.
Sockets Come Organized In A Sturdy Case That Features Strong Latches And Clear, Molded Markings For Each Tool.
S2 Steel Bit Is Press-Fit Into The Socket For A Straight, Permanent Connection That Can't Loosen Over Time.
Features
- Includes 8-pc 3/8 in. drive 6 in. long hex bit sockets: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.; 11-pc 3/8 in. drive 6 in. long hex bit sockets: 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm; Storage case
- S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
- 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners
- Extra-long bits allow you to reach deep into especially narrow, recessed areas
- Large, clear die-stamped size marking is easy to read and can t wear off
- Four detent grooves provide a secure connection with the drive tool
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
- Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
- Sockets come organized in a sturdy case that features strong latches and clear, molded markings for each tool
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 6.60 x 10.70 x 2.40 inches | Weight: 3.48 pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #7
TEKTON 1/4 Inch Drive x 10 mm Deep 6-Point Socket | SHD03110
Asin: B07R62BT49 | Model: SHD03110 | PartNumber: SHD03110 | Ean: 0020209026397 | UPC: 020209026397
Deep-Length Sockets Reach Into Wells And Accommodate The Excess Threads Of Longer Shafts.
Beveled Inner Rim Of The Socket Opening Helps Guide It Smoothly Onto Fasteners.
Polished, Chrome-Plated Finish Easily Wipes Clean And Is Highly Resistant To Corrosion.
Four Detent Grooves Provide A Secure Connection With The Drive Tool.
Extra-Large Die-Stamped Size Markings Are Easy To Read And Can’T Wear Off.
Socket Geometry Is Designed To Apply Force To Flat Sides Of Fasteners And Not The Corners, Preventing Round-Off.
Features
- 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads
- Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off
- Deep-length sockets reach into wells and accommodate the excess threads of longer shafts
- Extra-large die-stamped size markings are easy to read and can t wear off
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
- Four detent grooves provide a secure connection with the drive tool
- Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.60 x 2.00 x 0.60 inches
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #8
TEKTON 3/8 in Drive Hex Bit Socket Set, 19-Piece (1/8-3/8 in., 3-10 mm) with Rails | SHB91202
Asin: B0BJW6W24G | Model: SHB91202 | PartNumber: SHB91202 | Ean: 0020209989654 | UPC: 020209989654
6-Sided Hexagonal Tip Is Machined To Precise Tolerances For An Exact Fit With Hex Fasteners.
Beveled Inner Rim Of The Socket Opening Helps Guide It Smoothly Onto Fasteners.
Twist-To-Lock Socket Rail Organizes And Securely Holds Sockets In Place, Both For In Your Toolbox And On The Go.
Four Detent Grooves Provide A Secure Connection With The Drive Tool And A Drilled Through-Hole Allows Locking On With Retaining Pin.
Polished, Chrome-Plated Finish Easily Wipes Clean And Is Highly Resistant To Corrosion.
Large, Clear Die-Stamped Size Marking Is Easy To Read And Can’T Wear Off.
S2 Steel Bit Is Press-Fit Into The Socket For A Straight, Permanent Connection That Can't Loosen Over Time.
Features
- Includes 8-pc. 3/8 in. drive inch hex bit sockets: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.; 11-pc. 3/8 in. drive metric hex bit sockets: 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm; Socket rail
- S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time
- 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners
- Large, clear die-stamped size marking is easy to read and can t wear off
- Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin
- Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion
- Beveled inner rim of the socket opening helps guide it smoothly onto fasteners
- Twist-to-lock socket rail organizes and securely holds sockets in place, both for in your toolbox and on the go
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 2.30 x 17.30 x 6.30 Inches | Weight: 2.14 pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon #9
TEKTON 3/8 Inch Drive x 10 mm 6-Point Impact Socket | SID12110
Asin: B0942B9K8H | Model: SID12110 | PartNumber: SID12110 | Ean: 0020209054130 | UPC: 020209054130
Radiused Corners Prevent Fastener Round-Off By Applying Force To A Fastener's Flat Sides, Rather Than Its Corners.
Detent Pin Hole On One Side Allows User To Choose Whether To Engage A Pin.
Meets A Minimum Of 1.3 Times The Ansi/Asme Standard For Proof Torque.
6-Point Socket Opening Provides An Exact Fit For Hex Fasteners.
Features
- Size is marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off
- 6-point socket opening provides an exact fit for hex fasteners
- Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners
- Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque
- Detent pin hole on one side allows user to choose whether to engage a pin
- See more on Amazon...
Brand: TEKTON | Manufacturer: TEKTON
Dimensions: 0.70 x 1.20 x 0.70 Inches | Weight: 0.07 pounds
Warranty: No time limits, no receipts: tekton.com/warranty
See On Amazon
Looking For Something Else?
Search