HiLetgo 5pcs Bluetooth 5.0 Mp3 Lossless Decoder Board VHM-314 USB-C Audio Bluetooth Receiver Board Wireless Stereo Music Module Type-C
Asin: B0CDWW61S4 | Model: 3-01-1786 | PartNumber: 3-01-1786
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Micro Usb 5V Power Supply; Power Supply: Dc3.7~5V.
Standard 3.5Mm Interface, Output Stereo Sound Source, Easy To Plug In Headphones, Connect Amplifiers And Other Devices.
Support Bluetooth 5.0/4.2/4.1/4.0.
Bluetooth 5.0 Mp3 Lossless Decoder Board.
Features
- Bluetooth 5.0 Audio Receiver Board USB-C Type-C
- Bluetooth 5.0 Mp3 Lossless Decoder Board
- Micro USB 5V power supply; Power supply: DC3.7~5V
- Support Bluetooth 5.0/4.2/4.1/4.0
- Standard 3.5mm interface, output stereo sound source, easy to plug in headphones, connect amplifiers and other devices
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon Similar To HiLetgo 5pcs Bluetooth 5.0 Mp3
#1
HiLetgo 3pcs M18 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
Asin: B07W4PJ469 | Model: 3-01-1524 | PartNumber: 3-01-1524
Pin Pitch: 2.54Mm.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
D-FLIFE 5pcs 433mhz Wireless RF Transmitter and Receiver with Antenna Ask Remote Control Module DIY Kit for Arduino
Asin: B0BZRRBBNK | Ean: 0701715473539 | UPC: 701715473539
Low-Power Performance, Along With High Dynamic Range (Greater Than 60Db). Module Uses Highly Integrated Chip, Built Front-End Low-Noise Amplifier,Mixers, Filters, Frequency Synthesizer Circuit, Etc., Can Maximize The Signal Optimization..
Applications: Can Be Used For Wireless Power Switch, Socket, Remote Control Switch, Receiver Module, Smart Home Products, Remote Control Curtains, Remote Mp3, And So On..
Support Ask / Ook Modulation, The Receiver Sensitivity Of -108Dbm..
Mains Input Voltage Range: 2.2V-5V; Operating Frequency: 433.92 Mhz, Bandwidth Of About ± 150Khz..
Features
- 433mhz RF Transmitter and Receiver Superheterodyne UHF ASK Remote Control Switch Module For Arduino Wireless Diy Kit.
- Mains input voltage range: 2.2V-5V; Operating frequency: 433.92 MHz, bandwidth of about 150KHz.
- Low-power performance, along with high dynamic range (greater than 60dB). Module uses highly integrated chip, built front-end low-noise amplifier,Mixers, filters, frequency synthesizer circuit, etc., can maximize the signal optimization.
- Support ASK / OOK modulation, the receiver sensitivity of -108dBm.
- Applications: Can be used for wireless power switch, socket, remote control switch, receiver module, smart home products, remote control curtains, remote MP3, and so on.
- See more on Amazon...
Brand: D-FLIFE | Manufacturer: D-FLIFE
See On Amazon #3
HiLetgo 2pcs CC2540 CC2541 AT-09 Serial Wireless Module BLE 4.0 Bluetooth Module Compatible HM-10
Asin: B00WGPKZ8Y
Input Voltage: 3.3V/5V Only Needs A Set Of Power Supply..
Compatible Hm-10.
This Module Supports Uart Interface And Supports Spp Bluetooth Serial Port Protocol..
It Adopts Cc2541 Chip Of American Ti Company, Configures 256Kb Space, And Follows V4.0 Ble Bluetooth Specification..
Features
- Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible.
- It adopts CC2541 chip of American TI Company, configures 256Kb space, and follows V4.0 BLE Bluetooth specification.
- Input voltage: 3.3V/5V only needs a set of power supply.
- This module supports UART interface and supports SPP Bluetooth serial port protocol.
- Compatible HM-10
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
HiLetgo 3pcs M38 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
Asin: B07WC133P4 | Model: 3-01-1526 | PartNumber: 3-01-1526
This Product Has Its Own Dual 5W Power Amplifier Circuit, And Must Not Be Connected To Another Amplifier! The Outputs Of The Two Amplifiers May Not Be Connected In Parallel Or The Negative Poles May Be Connected Together, Otherwise The Power Amplifier Chip May Be Damaged..
Support Usb Sound Card, Free Drive (Plug And Play). Connect The Module To The Computer With A Usb Cable, And The Computer Can Play Music Through The Module Amplifier Output. Audio Output: Output Left And Right Stereo Audio Signals, Which Can Be Connected To Two 2-8 Ohm, 3-5W Speakers, And 4 Euro 5W Speakers..
Features
- Power supply: You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium battery (as shown below). Note that the 5V and 3.7V power supply interfaces are different. The 5V voltage is connected to 5V and GND, and the 3.7V lithium battery is connected to VBAT and GND. The maximum operating current is 5V2A. It is recommended to use a regulated 5V2A power supply for better sound quality.
- Support USB sound card, free drive (plug and play). Connect the module to the computer with a USB cable, and the computer can play music through the module amplifier output. Audio output: output left and right stereo audio signals, which can be connected to two 2-8 ohm, 3-5W speakers, and 4 Euro 5W speakers.
- This product has its own dual 5W power amplifier circuit, and must not be connected to another amplifier! The outputs of the two amplifiers may not be connected in parallel or the negative poles may be connected together, otherwise the power amplifier chip may be damaged.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
DORHEA 5PCS ESP-WROOM-32D ESP32 Bluetooth and WiFi Low Power Module integrates ESP32-D0WD Generic Wi-Fi+BT+BLE MCU Modules for Voice Encoding Music Streaming and MP3 Decoding
Asin: B08XXH9RMT | Ean: 0701715461734 | UPC: 701715461734
The Sleep Current Of The Esp32 Chip Is Less Than 5 Μa, Making It Suitable For Battery Powered And Wearable Electronics Applications..
Flash Integrated On The Module And Are Not Recommended For Other Uses..
Esp32-Wroom-32D Integrate A 4 Mb Of External Spi Flash. The Integrated Spi Flash Is Connected To Gpio6, Gpio7, Gpio8, Gpio9, Gpio10 And Gpio11. These Six Pins Cannot Be Used As Regular Gpios..
Esp32-Wroom-32D Are Powerful, Generic Wi-Fi+Bt+Ble Mcu Modules That Target A Wide Variety Of Applications, Ranging From Low-Power Sensor Networks To The Most Demanding Tasks, Such As Voice Encoding, Music Streaming And Mp3 Decoding..
Features
- ESP32-WROOM-32D, Core: ESP32-D0WD ; SPI flash: 32 Mbits, 3.3 V; Crysta: 40 MHz; Antenna: onboard antenna.
- ESP32-WROOM-32D are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.
- The sleep current of the ESP32 chip is less than 5 A, making it suitable for battery powered and wearable electronics applications.
- ESP32-WROOM-32D integrate a 4 MB of external SPI flash. The integrated SPI flash is connected to GPIO6, GPIO7, GPIO8, GPIO9, GPIO10 and GPIO11. These six pins cannot be used as regular GPIOs.
- Flash integrated on the module and are not recommended for other uses.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #6
HiLetgo 5pcs Bluetooth 5.0 Mp3 Lossless Decoder Board VHM-314 Audio Bluetooth Receiver Board Wireless Stereo Music Decoding Module Micro USB
Asin: B0CDWVT9NK
Micro Usb 5V Power Supply; Power Supply: Dc3.7~5V.
Standard 3.5Mm Interface, Output Stereo Sound Source, Easy To Plug In Headphones, Connect Amplifiers And Other Devices.
Support Bluetooth 5.0/4.2/4.1/4.0.
Vhm-314 Bluetooth Audio Receiver Board.
Features
- Bluetooth 5.0 Mp3 Lossless Decoder Board
- VHM-314 Bluetooth Audio Receiver Board
- Micro USB 5V power supply; Power supply: DC3.7~5V
- Support Bluetooth 5.0/4.2/4.1/4.0
- Standard 3.5mm interface, output stereo sound source, easy to plug in headphones, connect amplifiers and other devices
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
HiLetgo 3W Car Bluetooth 4.1 MP3 WAV Decoding Board Speaker Amplifier Audio Receiver Module Support USB/TF/U-Disk/IR with Remote Control
Asin: B07S8MLGY1 | Model: 3-01-1516 | PartNumber: 3-01-1516
Support To Output Stereo, With 3W Power Amplifier On Board;.
Support U Disk Tf Card Playing, Supprot Ir Remote Function.
Support Usb Audio Function, Support The Tf Card Downloading;.
Support To Decode Wav/Ape/Flac/Mp3 Files Losslessly;.
Features
- Support bluetooth 4.1 Mode, Support automatically back to even;
- Support to decode WAV/APE/FLAC/MP3 files losslessly;
- Support to output stereo, With 3W power amplifier on board;
- Support USB Audio Function, Support the TF card downloading;
- Support U disk TF card Playing, Supprot IR remote function
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
HiLetgo 2pcs MP3 Bluetooth Decoder Board Lossless Car Speaker Audio Amplifier Board Modified Bluetooth 4.1 Circuit Stereo Receiver Module5V
Asin: B083BVJLTD | Model: 3-01-1649 | PartNumber: 3-01-1649
Supports Bluetooth 4.1, Automatic Link Back Function, Wav+Ape+Flac+Mp3 Lossless Decoding, Stereo Output, And Tf Slot..
It Can Insert Tf Card, Can Read U Disk And Play Tf Card..
Features
- MP3 Bluetooth Decoder Board Lossless Car Speaker Audio Amplifier Board
- It can insert TF card, can read U disk and play TF card.
- Supports Bluetooth 4.1, automatic link back function, WAV+APE+FLAC+MP3 lossless decoding, stereo output, and TF slot.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #9
HiLetgo 3pcs M28 Wireless Bluetooth MP3 Audio Receiver Board BLT 4.2 mp3 Lossless decoder Bluetooth 4.2 Audio Receiver Board Wireless Stereo Sound Module
Asin: B07W7YCFS1 | Model: 3-01-1525 | PartNumber: 3-01-1525
Audio Output: The Earphone Can Be Directly Connected To The 3.5Mm Audio Interface, Or It Can Be Wired For The Audio Input Of The Power Amplifier Board (The Interface L/R/Agnd Can Be Directly Wired As Shown)..
Features
- Power supply: You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium battery (as shown below). Note that the 5V and 3.7V power supply interfaces are different. The 5V voltage is connected to 5V and GND, and the 3.7V lithium battery is connected to VBAT and GND.
- Audio output: The earphone can be directly connected to the 3.5mm audio interface, or it can be wired for the audio input of the power amplifier board (the interface L/R/AGND can be directly wired as shown).
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon
Looking For Something Else?
Search