Gas Cap Fuel Cap Replace 99620124103 Compatible with Porsche 986 987 996 997 For 1998-2013 Porsche 911 1997-2012 Porsche Boxster 2006-2012 Porsche Cayman Gas Caps Fuel Caps, 99950749940 Fuel Tank Caps
Asin: B0CH3WXNGB | Model: 99620124103 | PartNumber: 99620124103
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.❌【Damage Condition】Loose And Cracked Fuel Cap, Engine Light Cel Comes On, Gasoline Or Diesel Vapor Smells, Car Smokes Or Makes Unusual Noises, Etc. If The Above Situation Occurs, Please Check The Fuel Tank Cap Immediately For Damage And Replace It..
💡【Tips】We Will Send In An Extra Buckle, In Order Your Buckle Gets Dirty Or Breaks During Use, Replace It And Stays It Strong. This Is Not A Genuine Part, It's A Aftermarket Replacement Part. Please Confirm Your Old Parts With Pictures And Model Numbers Before Buying. If The Fuel Filler Cap Is Faulty, Please Contact Us For A Replacement. In Addition, If You Have Any Other Questions About Our Gas Fuel Tank Filler Cap, Please Contact Us As Soon As Possible..
🔧【Install】100% Brand New, Ready To Install Out Of The Box. First, You Need Open The Old Fuel Tank Caps To Remove It. Second, Take Out The New Gas Caps And Replace It, Seal Them By Turning Them Until You Hear A Click To Determine If The Car Caps Are Tight. Finally, Check The Cover Is Fit Or Not..
🚘【Compatible With Porsche 986 987 996 997 Vehicles:】1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Porsche 911| 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Porsche Boxster | 2006 2007 2008 2009 2010 2011 2012 Porsche Cayman Gas Caps Fuel Caps..
Features
- Feature The Gas Cap Fuel Cap provides a tight seal, keeps the vehicle fuel tank closed, prevents oil leakage, blocks rainwater penetration, protects vehicle occupants, saves fuel and reduces steam emissions. High performance, long service life, made of reinforced ABS plastic and high quality sealing rubber, more resistant to cold and heat.
- Compatible with Porsche 986 987 996 997 Vehicles: 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Porsche 911| 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Porsche Boxster | 2006 2007 2008 2009 2010 2011 2012 Porsche Cayman Gas Caps Fuel Caps.
- Damage Condition Loose and cracked Fuel Cap, engine light CEL comes on, gasoline or diesel vapor smells, car smokes or makes unusual noises, etc. If the above situation occurs, please check the Fuel Tank Cap immediately for damage and replace it.
- Install 100% brand new, ready to install out of the box. First, you need open the old Fuel Tank Caps to remove it. Second, take out the new Gas Caps and replace it, seal them by turning them until you hear a click to determine if the car caps are tight. Finally, check the cover is fit or not.
- Tips We will send in an extra buckle, in order your buckle gets dirty or breaks during use, replace it and stays it strong. This is NOT a genuine part, it's a aftermarket replacement part. Please confirm your old parts with pictures and model numbers before buying. If the Fuel Filler Cap is faulty, please contact us for a replacement. In addition, if you have any other questions about our Gas Fuel Tank Filler Cap, please contact us as soon as possible.
- See more on Amazon...
Brand: YITHSWAY | Manufacturer: YITHSWAY
Dimensions: 3.15 x 3.15 x 2.36 inches | Weight: 0.02 pounds
Warranty: 90 days
See On Amazon Similar To Gas Cap Fuel Cap Replace
#1
Gas Can Spout Replacement, Gas Can Nozzle, (3 Kit-Yellow) Suitable for Most 1/2/5/10 Gal Oil Cans. Gas Spout Replacement, Fuel Can Spout, Gas Tank Nozzle. The tube is soft and flexible to use
Asin: B0CDDQYDJ9
Anti-Overflow Design, (Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Can Spout Cap Is Hexagonal) The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down.
Simple To Install, Each Set Of Products Includes, 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread) 3 Yellow Spouts And Rubber Gaskets, 3 Nozzle Caps With Threads, 2 Kinds Of Gas Can Vent Caps, And The Drill Bit Required To Install The Gas Discharge Cap. During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible.
Can Cover More Oil Cans, We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, You Only Need Simple Drilling And Installation To Use. (Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.
These Kits Are Made Of High Quality Hdpe Material. The Hoses Are Molded In One Piece, With No Steps For Secondary Connections That Will Not Compromise The Toughness And Strength Of The Hose. In Use You Can Bend Freely Without Breaking. Thicker And Widened Rubber Gaskets, Can Better Fit The Bottle Cap, Prevent Liquid Leakage When Refueling.
Features
- Gas Can Spout Replacement, The upgraded gas can spout kit is more compatible and the length of the hose is longer. Oil jug mouth sizes from 1.7in-1.82in both can be used. The total length of the hose is 8.1in, which is more convenient and flexible to use. Please measure your oil cans mouth size before purchasing
- These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling
- Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down
- Can cover more oil cans, We offer two types of gas can vent caps, (gas can vent caps-A) is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use. (gas can vent caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps
- Simple to install, Each set of products includes, 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible
- See more on Amazon...
Brand: ZORYILUO | Manufacturer: FOANRIY
See On Amazon #2
Godboy Gas Can Spout Replacement, Gas Can Nozzle, (5 Kit-Yellow) Flexible Pour Nozzle Suitable for Most 1/2/5/10 Gal Oil Cans, Fuel Can Spout Replacement
Asin: B0BW5PLYL5 | Model: GB0218 | PartNumber: GB0218
【Anti-Overflow Design】The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down. (Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Can Spout Cap Is Octagonal).
【Suitable For More Cans】We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use.(Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps..
【Ideal Valuable Kit】All The Tools Required For Your Gas Can Handling. It Comes With 5 Yellow Spouts, 10 Screw Collar Caps( 5 Coarse Thread & 5 Fine Thread), 5 Spout Caps, 5 Sealing Gaskets For Spout Caps, 5 Gasket Stoppers For Gas Can Vent Caps-B, 10 Vent Caps In Two Models Suit For Most Oil Cans And 1 Drill Bit Of The Proper Size..
【High-Quality】Made From High-Quality Hdpe Materials. Gas Can Spouts Have Excellent Durability, And Include Thicker And Widen Rubber Gaskets To Help Ensure A Good, Tight Fit To The Cans. Definitely Easy To Use, All Seals Worked Great, Easy To Install, Great Value For Your Money! Enjoy The "Old School" Design That Actually Prevents Spills And Leaks, Even In Transport Or Upside Down..
Features
- Gas Can Spout Replacement Suitable for most 1/2/5/10 Gal oil cans. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing.
- High-Quality Made from high-quality HDPE materials. Gas can spouts have excellent durability, and include thicker and widen rubber gaskets to help ensure a good, tight fit to the cans. Definitely easy to use, all seals worked great, easy to install, great value for your money! Enjoy the old school design that actually prevents spills and leaks, even in transport or upside down.
- Anti-Overflow Design The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down. (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is octagonal)
- Ideal Valuable Kit All The Tools Required For Your Gas Can Handling. It comes with 5 yellow spouts, 10 screw collar caps( 5 Coarse Thread & 5 Fine Thread), 5 spout caps, 5 sealing gaskets for spout caps, 5 gasket stoppers for gas can vent caps-B, 10 vent caps in two models suit for most oil cans and 1 drill bit of the proper size.
- Suitable for More Cans We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.(Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps.
- See more on Amazon...
Brand: Godboy
Dimensions: 2.75 x 9.45 x 5.10 inches
See On Amazon #3
Gas Cap,Fuel Cap For 2000-2019 Dodge Ram 1500 2500 3500 Charger Challenger Dart Durango Journey Nitro Grand Caravan Caliber Dakota & Chrysler 200 300 Town and Country Aspen Sebring & Jeep Wrangler JK
Asin: B08CR8YZC3
【Compatible With Dodge】Fuel Cap Compatible With 2008-2014 Avenger | 2008-2012 Caliber | 2008-2013 Challenger | 2006-2010 Charger | 2000-2010 Dakota | 2013-2016 Dart | 2011-2018 Durango | 2000-2004 Intrepid | 2009-2020 Journey | 2005-2008 Magnum | 2000-2005 Neon | 2000-2006 Stratus | 2007-2011 Nitro | 2008-2010 Viper | 1998-2020 Grand Caravan | 2001-2007 Caravan | 2000-2010 Ram 1500 2500 3500.
【Excellent Function】High Quality Materials, Gas Cap Must Take 100% Inspected And Tested Multiple Times Before The Shipment, Fuel Tank Filler Cap Is Constructed Of Premium Material For Long Lasting Durability And Reliability. Direct Replacement, Easy Installation..
【Compatible With Jeep & Plymouth】Compatible With 2003-2020 Jeep Wrangler Jk, 2003-2006 Wrangler Tj, 2002-2012 Liberty, 2008-2018 Compass, 2001-2019 Grand Cherokee, 2006-2010 Commander, 2000-2017 Cherokee, 2008-2017 Patriot, Gas Cap Compatible With 2000-2001, 2014-2017 Cherokee | 2008-2018 Compass | 2011-2019 Grand Cherokee | 2008-2018 Patriot | 2014-2016 Promaster 1500 2500 3500, Compatible With 2000-2005 Plymouth Neon & 2000 Breeze.
【Compatible With Ram & Chrysler】Gas Cap Compatible With 2000-2020 Ram 1500 2500 3500 | 2014-2020 Ram 4500 5500 | 2014-2021 Promaster 1500 2500 3500 | 2016-2020 Promaster City | 2011-2012 Ram Dakota | 2012,2015 Ram C/V, Compatible With 2011-2017 Chrysler 200 | 2005-2010 300| 2000-2004 300M | 1999-2000 Cirrus | 2000-2004 Concorde | 2000-2004 Intrepid | 2000-2002 Neon | 2001-2010 Pt Cruiser | 2001-2008 Sebring | 2007-2009 Aspen |2004-2008 Pacifica | 1998-2017 Town & Country | 2001-2003 Voyager.
Features
- FUEL CAP / GAS CAP COMPATIBLE WITH 52030377AB, 5278632AG, 52030377AA, Fuel Tank Filler Cap Is 100% Rigorously Tested Before Shipping. Gas Cap Compatible With Ram,Dodge,Chrysler,JEEP And More vehicles, Not All Of The Vehicles Are Listed, PLESE CHECK THE DROP DOWN BAR TO CHECK THE COMPATIBLE.
- COMPATIBLE WITH RAM & CHRYSLER Gas Cap Compatible With 2000-2020 Ram 1500 2500 3500 | 2014-2020 Ram 4500 5500 | 2014-2021 Promaster 1500 2500 3500 | 2016-2020 Promaster City | 2011-2012 Ram Dakota | 2012,2015 Ram C/V, Compatible With 2011-2017 Chrysler 200 | 2005-2010 300| 2000-2004 300M | 1999-2000 Cirrus | 2000-2004 Concorde | 2000-2004 Intrepid | 2000-2002 Neon | 2001-2010 Pt Cruiser | 2001-2008 Sebring | 2007-2009 Aspen |2004-2008 Pacifica | 1998-2017 Town & Country | 2001-2003 Voyager
- COMPATIBLE WITH DODGE Fuel Cap Compatible With 2008-2014 Avenger | 2008-2012 Caliber | 2008-2013 Challenger | 2006-2010 Charger | 2000-2010 Dakota | 2013-2016 Dart | 2011-2018 Durango | 2000-2004 Intrepid | 2009-2020 Journey | 2005-2008 Magnum | 2000-2005 Neon | 2000-2006 Stratus | 2007-2011 Nitro | 2008-2010 Viper | 1998-2020 Grand Caravan | 2001-2007 Caravan | 2000-2010 Ram 1500 2500 3500
- COMPATIBLE WITH JEEP & PLYMOUTH Compatible With 2003-2020 JEEP Wrangler JK, 2003-2006 Wrangler TJ, 2002-2012 Liberty, 2008-2018 Compass, 2001-2019 Grand Cherokee, 2006-2010 Commander, 2000-2017 Cherokee, 2008-2017 Patriot, Gas Cap Compatible With 2000-2001, 2014-2017 Cherokee | 2008-2018 Compass | 2011-2019 Grand Cherokee | 2008-2018 Patriot | 2014-2016 Promaster 1500 2500 3500, Compatible With 2000-2005 Plymouth Neon & 2000 Breeze
- EXCELLENT FUNCTION High Quality Materials, Gas Cap Must Take 100% Inspected And Tested Multiple Times Before The Shipment, Fuel Tank Filler Cap Is Constructed Of Premium Material For Long Lasting Durability And Reliability. Direct Replacement, Easy Installation.
- See more on Amazon...
Brand: ROVIKE | Manufacturer: ROVIKE
See On Amazon #4
EZ-POUR Gas Can Spout Replacement Multi-Use For Deluxe Gas Cans and Water Jugs (Pack of 1) - 1, 2, 5 Gallon HI-FLO System with Extension, Flame Arrestor, Flexible Gas Can Nozzle for Jerry Cans
Asin: B00YP3YTXM | Model: EZ Pour - 30051 | PartNumber: EZ Pour - 30051 | Ean: 0721947607793, 0857413003032, 0653395314438, 0827165671964, 5207442859851, 7147905921191 | UPC: 827165671964, 721947607793, 857413003032, 653395314438
Easy-To-Assemble, Revitalizing Gas Cans With Confidence – Say Goodbye To Headaches, Our Hassle-Free Solution Allows Anyone To Revitalize Their Existing Gas Cans And Water Jugs. Ez-Pour Flexible Replacement Is So Versatile. Whether It's Gas Nozzles For Gas Cans, A Diesel Fuel Can Spout, Or A Heavy-Duty Gas Spout, Our Effortless Kit Has Only A Few Easy-To-Identify Components That Will Restore Your Old Gas Can To Its Former Glory. Includes One 8 Inch Hi-Flo Spout And One 8 Inch Extension!.
Eradicate Fuel Spills With Confidence - Bid Farewell To Messy Fuel Spillage With Our Sturdy Gas Spout Replacement. Designed With Your Convenience In Mind, It Includes A Robust Cap, Ensuring Secure And Spill-Free Fuel Transportation And Storage. Whether You're Revitalizing An Older Water Jug Or Seeking A Universal Gas Can Spout Upgrade, The Ez-Pour Rigid Spout Replacement Is The Ultimate Solution. No Worrisome Leaks, Just An Efficient Refueling Experience With Our Top-Tier Spout For Gas Can..
Compatible With A Wide Range Of Gas Cans And Water Jugs – Our Spout Will Seamlessly Fit Most Water Jugs And Gas Cans Including Popular Brands Like Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, And Scepter. Less Hassle Searching For Specific Gas Can Spouts; Our Gas Can Spout Ensures Compatibility For A Consistent Experience Across Various Containers. We’Ve Designed This Replacement Gas Can Spout Kit For Quick Assembly Because Your Time Matters..
A Lightweight & Durable Gas Can Spout Kit - Easily Attach Our Spout For Jerry Cans To Most Gas Cans And Water Jugs For Keeping Spare Gasoline Or Completing Chores For Your Home Or Farm. With This Gas Spout Kit, You Can Have Your Old Gas Cans Looking And Feeling Like New. This Kit Is A Unique Spout, One 8 Inch Hi-Flo Spout And Another 8" Spout Extension For Those Hard-To-Reach Tanks. A 1/2” Replacement Push-In Vent, Filter Screen, And Second Base Cap To Fit Additional Cans Are Also Included..
Features
- LONG & FLEXIBLE UNIVERSAL GAS CAN SPOUT REPLACEMENT - Unlike other gas can replacement parts that are cheap and require replacement again and again EZ POUR Gas Can Spout made with extra-dense material won t crack in the cold. This single gas cap spout is designed to ensure a fast flow letting you spend less time in the cold and more time getting to where you need to go! Unleash the power of endurance and versatility with our gas can nozzle replacement, ensuring extended equipment lifespan.
- A LIGHTWEIGHT & DURABLE GAS CAN SPOUT KIT - Easily attach our spout for jerry cans to most gas cans and water jugs for keeping spare gasoline or completing chores for your home or farm. With this gas spout kit, you can have your old gas cans looking and feeling like new. This kit is a unique spout, one 8 inch HI-FLO spout and another 8 Spout Extension for those hard-to-reach tanks. A 1/2 replacement push-in vent, filter screen, and second base cap to fit additional cans are also included.
- EASY-TO-ASSEMBLE, REVITALIZING GAS CANS WITH CONFIDENCE Say goodbye to headaches, our hassle-free solution allows anyone to revitalize their existing gas cans and water jugs. EZ-POUR Flexible Replacement is so versatile. Whether it's gas nozzles for gas cans, a diesel fuel can spout, or a heavy-duty gas spout, our effortless kit has only a few easy-to-identify components that will restore your old gas can to its former glory. Includes one 8 inch HI-FLO Spout and one 8 inch extension!
- COMPATIBLE WITH A WIDE RANGE OF GAS CANS AND WATER JUGS Our spout will seamlessly fit most water jugs and gas cans including popular brands like Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, and Scepter. Less hassle searching for specific gas can spouts; our gas can spout ensures compatibility for a consistent experience across various containers. We ve designed this replacement gas can spout kit for quick assembly because your time matters.
- ERADICATE FUEL SPILLS WITH CONFIDENCE - Bid farewell to messy fuel spillage with our sturdy gas spout replacement. Designed with your convenience in mind, it includes a robust cap, ensuring secure and spill-free fuel transportation and storage. Whether you're revitalizing an older water jug or seeking a universal gas can spout upgrade, the EZ-POUR rigid spout replacement is the ultimate solution. No worrisome leaks, just an efficient refueling experience with our top-tier spout for gas can.
- See more on Amazon...
Brand: EZ-POUR | Manufacturer: EZ-POUR Store
Dimensions: 13.00 x 13.00 x 7.00 inches | Weight: 0.20 pounds
Warranty: lifetime
See On Amazon #5
Gas Cap, Fuel Cap For 2003-2018 Jeep Wrangler JK, 2003-2006 Wrangler TJ, Liberty, Cherokee, Compass, Commander,Grand Cherokee & Dodge Ram 1500 Journey Dakota Dart Durango Caravan & Chrysler 200 300
Asin: B08FSXXWZV | Model: 52100552AG | PartNumber: 52100552AG | Ean: 0782901674480 | UPC: 782901674480
【Compatible With Dodge & Chrysler】Gas Cap/ Fuel Cap Compatible With Dodge Ram 1500 2500 3500 | 2008-2014 Avenger | 1998-2021 Grand Caravan | 2009-2021 Journey | 2001-2007 Caravan | 2008-2012 Caliber | 2006-2010 Charger | 08-13 Challenger | 2000-2010 Dakota | 13-16 Dart | 01-18 Durango | 2000-2004 Intrepid | 2005-2008 Magnum | 2000-2005 Neon | 2007-2011 Nitro & Compatible With Chrysler 200 300 | 2007-2009 Aspen | 1998-2017 Town And Country | 2004-2008 Pacifica | 2001-2008 Sebring And More..
【Customer Service】If For Any Reason At All, You're Not 100% Satisfied With The Fuel Tank Filler Cap, Simply Return It For A Full Refund In 30 Days..
【Superiority】Gas Cap Compatible With Jeep Wrangler Is Easy Installation. High Reliability. It Could Correctly Replace The Original Part.Please Check The Detailed Description And Oe Part Number To Confirm The Compatibility Before Purchase.Thank You!.
【Compatible With Jeep Models】Gas Cap/ Fuel Cap Compatible With 2003-2018 Jeep Wrangler Jk, Compatible With 2003-2006 Jeep Wrangler Tj, 2000-2017 Cherokee, 2008-2018 Compass, 2002-2012 Liberty, 2001-2019 Grand Cherokee, 2006-2010 Commander, 2008-2017 Patriot. (Includ 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Models).
Features
- FUEL CAP / GAS CAP COMPATIBLE WITH 52100552AG, 52030387AB, 52030387AA, Fuel Tank Filler Cap Compatible With Jeep Wrangler Is 100% Rigorously Tested Before Shipping. Check The Part Number To Confirm The Compatibility Before Purchase.
- COMPATIBLE WITH JEEP MODELS Gas Cap/ Fuel Cap Compatible With 2003-2018 Jeep Wrangler JK, Compatible With 2003-2006 Jeep Wrangler TJ, 2000-2017 Cherokee, 2008-2018 Compass, 2002-2012 Liberty, 2001-2019 Grand Cherokee, 2006-2010 Commander, 2008-2017 Patriot. (Includ 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Models)
- COMPATIBLE WITH DODGE & CHRYSLER Gas Cap/ Fuel Cap Compatible With Dodge Ram 1500 2500 3500 | 2008-2014 Avenger | 1998-2021 Grand Caravan | 2009-2021 Journey | 2001-2007 Caravan | 2008-2012 Caliber | 2006-2010 Charger | 08-13 Challenger | 2000-2010 Dakota | 13-16 Dart | 01-18 Durango | 2000-2004 Intrepid | 2005-2008 Magnum | 2000-2005 Neon | 2007-2011 Nitro & Compatible With Chrysler 200 300 | 2007-2009 Aspen | 1998-2017 Town And Country | 2004-2008 Pacifica | 2001-2008 Sebring And More.
- Superiority Gas Cap Compatible With Jeep Wrangler is easy Installation. High Reliability. It Could Correctly Replace The Original Part.Please Check The Detailed Description And Oe Part Number To Confirm The Compatibility Before Purchase.Thank You!
- CUSTOMER SERVICE If For Any Reason At All, You'Re Not 100% Satisfied With The Fuel Tank Filler Cap, Simply Return It For A Full Refund In 30 Days.
- See more on Amazon...
Brand: ROVIKE | Manufacturer: ROVIKE
Weight: 0.16 Pounds
See On Amazon #6
EZ-POUR Rigid Spout Replacement and Vent kit for Water Jugs and Pre-2009 Gas Cans - Update your Old Cans | Includes Spout, Cap, Replacement Vent, Flame Arrestor, & Secondary Base Cap
Asin: B07S42B8T9 | Model: 80080az | PartNumber: 80080az | Ean: 0857413003421 | UPC: 857413003421
No More Fuel Spillage: Our Rigid Spout Replacement Comes With A Sturdy Cap That Allows You To Transport Or Store Fuel Easily. If You Are Looking To Update Your Old Water Jug Or Gas Can, Update It Today With An Ez-Pour Rigid Spout Replacement And Vent Kit, And No Need To Worry About Any Fuel Spillage..
Update Your Old Gas Cans: With The Ez-Pour Rigid Spout Replacement And Vent Kit, You Don't Have To Go Through The Trouble Of Replacing Your Old Can. Instead, You Can Bring Your Old Gas Can Back To Its New Condition With Our Spout Replacement And Vent Kit For Easy Storage And Transportation Of Fuel..
Highly Compatible: Our Ez-Pour Rigid Spout Replacement And Vent Kit Is A Perfect Fit For Most Water Jugs And Pre-2009 Gas Cans Such As Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, And Scepter Cans, And Many Others. Due To Its High Compatibility, You Don't Need To Change The Spout Type When Using A Different Gas Can Every Time, Your Time Spent Is Important To Us!.
Complete Package (Does Not Incude Gas Can): The Rigid Spout Replacement And Vent Kit Is A Complete Package. You Won't Need To Buy Another Spout Cap Separately! The Whole Package Includes A Spout, Cap, Replacement Vent, Flame Arrestor, Gasket And Secondary Base Cap..
Features
- DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span.
- COMPLETE PACKAGE (DOES NOT INCUDE GAS CAN): The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap.
- NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage.
- HIGHLY COMPATIBLE: Our EZ-POUR rigid spout replacement and vent kit is a perfect fit for most water jugs and pre-2009 gas cans such as Blitz, Briggs Stratton, Eagle, Essence, Gott, Igloo, Midwest, Rubbermaid, and Scepter cans, and many others. Due to its high compatibility, you don't need to change the spout type when using a different gas can every time, your time spent is important to us!
- UPDATE YOUR OLD GAS CANS: With the EZ-POUR rigid spout replacement and vent kit, you don't have to go through the trouble of replacing your old can. Instead, you can bring your old gas can back to its new condition with our spout replacement and vent kit for easy storage and transportation of fuel.
- See more on Amazon...
Brand: EZ-POUR | Manufacturer: EZ-POUR
See On Amazon #7
HOODELL C1U-K82 C1U-K54A Carburetor, for Mantis Tiller 7222 7222M 7225 7920, Echo TC-210 HC-1500, Premium Cultivator Carb, Plus Rebuild Kit Primer Bulb Fuel Line and More
Asin: B07GFM1VHQ | Ean: 0602168708622 | UPC: 602168708622
★ Wide Use Parts: Replace For Zama C1u-K82 C1u-K54 C1u-K54a C1u-K46 C1u-K27 C1u-K27a C1u-K27b C1u-K17 Carburetor. Fit For Mantis / Echo / Little Wonder Tiller, Cultivator And Trimmer Carb With 2-Cycle Engine: Sv-4B Sv-4Bh Sv-5C Sv-5C/1 Sv-5C/2 Sv-5Ci Sv-5Ci/2 Sv-5H Sv-5H/2 Sv-6 Sv-6/1 Sv-6/2..
★ What You Get: 1 Carburetor, 2 Mounting Gasket, 2 Primer Bulb, 1 Air Filter, 1 Spark Plug, 1 Fuel Filter, 3 Fuel Line, 1 Fuel Tank Grommet, 1 Vent. Our Friendly And Prompt Customer Service. Worthwhile To Choose!.
★ Non Anxious Equipment: Perfect Maintenance Kit For Mantis And Echo, Stable Performance And High Reliability Carb. Adjustable High / Low Screw Without Limiter Cap, Easy To Reach Full Power. Excellent Starting, Idling And Speed Up, Bring A New Running Smoothly..
★ Easy To Install And Fired: Rebuild As The Way Your Old Carburetor Fall Off, Only A Minor Adjustment Required, You Will Be Pleasantly Surprised To Find That A New Engine Come Back. Start Up Right Away And Run Like A Champ. A Simple And Fast Fix Work, Instead Of Repairing Your Carburetor For A Long Time..
Features
- Generic Model Carb: For Mantis 7222 7222E 7222M 7225 7230 7234 7240 7920 7924 tiller / cultivator, compatible for Echo TC-210 TC-210i TC-2100 HC-1500 tiller / hedge trimmer carburetor. With air filter, spark plug, grommet and more.
- Easy To Install And Fired: Rebuild as the way your old carburetor fall off, only a minor adjustment required, you will be pleasantly surprised to find that a new engine come back. Start up right away and run like a champ. A simple and fast fix work, instead of repairing your carburetor for a long time.
- Wide Use Parts: Replace for ZAMA C1U-K82 C1U-K54 C1U-K54A C1U-K46 C1U-K27 C1U-K27A C1U-K27B C1U-K17 carburetor. Fit for Mantis / Echo / Little Wonder tiller, cultivator and trimmer carb with 2-cycle engine: SV-4B SV-4BH SV-5C SV-5C/1 SV-5C/2 SV-5Ci SV-5Ci/2 SV-5H SV-5H/2 SV-6 SV-6/1 SV-6/2.
- Non Anxious Equipment: Perfect maintenance kit for Mantis and Echo, stable performance and high reliability carb. Adjustable high / low screw without limiter cap, easy to reach full power. Excellent starting, idling and speed up, bring a new running smoothly.
- What You Get: 1 carburetor, 2 mounting gasket, 2 primer bulb, 1 air filter, 1 spark plug, 1 fuel filter, 3 fuel line, 1 fuel tank grommet, 1 vent. Our friendly and prompt customer service. Worthwhile to choose!
- See more on Amazon...
Brand: HOODELL | Manufacturer: HOODELL
See On Amazon #8
Stens 765-510 Fuel Can Spout Kit, CARB Approved, Fast flow rate, Automatic stop, Leak Proof, 3 Height, 3 Width, 10 Depth
Asin: B073JJX64N | Model: 4240 | PartNumber: 4240 | Ean: 0079223042401 | UPC: 079223042401
Specs: Spout Closes Automatically With An Airtight Seal.
Not Compatible With Greater Than 10% Ethanol Fuel.
Reliable Fitment: Please Verify This Is The Right Part Number Before Ordering. We Pride Ourselves In Providing Reliable Fitment Data So You Can Find The Right Part To Get The Job Done. If You Believe We Have An Error, We Would Be Grateful For Your Feedback..
30-Day Return Policy/1-Year Warranty: If Your Order Arrives And It’S Not Exactly What You Want, You May Return It Within 30 Days For A Refund. We Know That People Sometimes Order A Part And Then Discover It’S Not Exactly The One They Need For The Repair. We Understand And Want To Work With You. Just Make Sure The Item Is In Its Original Packaging And In Good Condition Free Of Damage. Outside Of 30-Days, We Will Replace It Anytime Within One Year Of Your Order..
Features
- COMPATIBILITY: Compatible with CARB Approved, Fast flow rate, Automatic stop
- 30-DAY RETURN POLICY/1-YEAR WARRANTY: If your order arrives and it s not exactly what you want, you may return it within 30 days for a refund. We know that people sometimes order a part and then discover it s not exactly the one they need for the repair. We understand and want to work with you. Just make sure the item is in its original packaging and in good condition free of damage. Outside of 30-days, we will replace it anytime within one year of your order.
- SPECS: Spout closes automatically with an airtight seal
- RELIABLE FITMENT: Please verify this is the right part number before ordering. We pride ourselves in providing reliable fitment data so you can find the right part to get the job done. If you believe we have an error, we would be grateful for your feedback.
- Not compatible with greater than 10% ethanol fuel
- See more on Amazon...
First Available: 08/16/2017
Brand: Stens | Manufacturer: Stens
Dimensions: 2.10 x 11.00 x 4.75 inches | Weight: 0.15 Pounds
Warranty: AS LISTED
See On Amazon #9
Gas Can Spout Replacement,Gas Can Nozzle,(2 Kit-White) with 4 Screw Collar Caps(2 Coarse Thread &2 Fine Thread-Fits Most of The Cans) with Gas Can Vent Caps, Thick Rubber pad, Spout Cover, Base Caps
Asin: B0B14BXNKH
Anti-Overflow Design, (Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Con Spout Cap Is Hexagonal)The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down..
Simple To Install, Each Set Of Products Includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 White Spouts And Rubber Gaskets, 2 Nozzle Caps With Threads，2 Kinds Of Gas Can Vent Caps, And The Drill Bit Required To Install The Gas Discharge Cap. During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible..
Can Cover More Oil Cans, We Offer Two Types Of Gas Can Vent Caps, (Gas Can Vent Caps-A) Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use. (Gas Can Vent Caps-B) Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps..
High-Quality Materials, These Gas Can Nozzle Replacement Parts Are Made Of High-Quality Hdpe Materials,In Use, You Can Bend Freely Without Breaking. Thicker And Widened Rubber Gaskets, Can Better Fit The Bottle Cap, Prevent Liquid Leakage When Refueling..
Features
- Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed.
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.
- Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.
- Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps.
- Simple to install, Each set of products includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 White Spouts and rubber gaskets, 2 nozzle caps with threads 2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible.
- See more on Amazon...
Brand: FOANRIY | Manufacturer: FOANRIY
See On Amazon #10
STP Ultra 5 In 1 Fuel System Cleaner and Stabilizer, Deep Cleans Fuel System and Fights Engine Friction, 12 FlOz
Asin: B00K5L8H1I | Model: 18410B | PartNumber: 18410B | Ean: 7262318304925, 0071153174375 | UPC: 071153174375
Formulated To Help Prevent Ethanol Deposits And Inhibit Corrosion.
Compatible With Cap-Less Gas Systems.
Works With Modern Gasoline Engines Such As Turbo, Direct Inject And Hybrid Vehicles.
Formulated To Help Restore Peak Performance And Reduce Friction By Lubricating Engine Parts.
Features
- Formulated to help save gas and lower emissions by deep cleaning the entire fuel system
- Formulated to help restore peak performance and reduce friction by lubricating engine parts
- Formulated to help prevent ethanol deposits and inhibit corrosion
- Works with modern gasoline engines such as turbo, direct inject and hybrid vehicles
- Compatible with cap-less gas systems
- See more on Amazon...
First Available: 04/22/2022
Brand: STP | Manufacturer: STP
Dimensions: 3.82 x 1.65 x 7.99 inches | Weight: 0.44 pounds
See On Amazon #11
HOODELL Adjustable SRM225 Carburetor for Echo GT225 PE225 PAS-225 SHC-225 RB-K93 SRM-225 Weed Eater Parts Rebuild, Easy-Start Trimmer Edger Carb with Tune Up Kit Primer Bulb
Asin: B07GFNFN9B | Model: SRM225 SRM-225 GT225 PE225 PAS-225 | PartNumber: SRM225 SRM-225 GT225 PE225 PAS-225 | Ean: 0602168708639 | UPC: 602168708639
★ Wide Use Parts: Carburetor With Rebuilding Kit, Fit For Zama Rb-K93 Carb, Replace For Echo Manufacturer Part Number: A021001690 A021001691 A021001692. Notice: Fuel Lines Are Incompatible With Greater Than 10% Ethanol Fuel..
★ What You Get: 1 Carburetor, 2 Mounting Gasket, 2 Primer Bulb, 1 Air Filter, 1 Spark Plug, 1 Fuel Filter, 3 Fuel Lines, 2 Grommet, 1 Vent. Our Friendly And Prompt Customer Service. Worthwhile To Choose!.
★ Non Anxious Equipment: Perfect Tune Up Kit For Zama And Echo, Stable Performance And High Reliability Carb. Adjustable Mixture Brass Screw Without Blocked Cap, Easy To Reach Full Power. Excellent Starting, Idling And Speed Up, Bring A New Running Smoothly..
★ Easy To Install And Fired: Rebuild As The Way Your Old Carburetor Fall Off, Almost No Adjustment Required, You Will Be Pleasantly Surprised To Find That A New Engine Come Back. Start Up Right Away And Run Like A Champ. A Simple And Fast Fix Work, Instead Of Repairing Your Carburetor For A Long Time..
Features
- Generic Model Carb: For ECHO SRM225 SRM225I GT225 GT225SF PAS225 PAS225SB PAS225VP weedeater / string trimmer / brush cutter carburetor, PE225 PPF225 power edger / pruner, SHC225 SHC225-S hedge trimmer. Plus maintenance kit spark plug, fuel line, primer bulb, air filter, gasket, grommet.
- Easy To Install And Fired: Rebuild as the way your old carburetor fall off, almost no adjustment required, you will be pleasantly surprised to find that a new engine come back. Start up right away and run like a champ. A simple and fast fix work, instead of repairing your carburetor for a long time.
- Wide Use Parts: Carburetor with rebuilding kit, fit for ZAMA RB-K93 carb, replace for ECHO manufacturer part number: A021001690 A021001691 A021001692. Notice: fuel lines are incompatible with greater than 10% ethanol fuel.
- Non Anxious Equipment: Perfect tune up kit for ZAMA and ECHO, stable performance and high reliability carb. Adjustable mixture brass screw without blocked cap, easy to reach full power. Excellent starting, idling and speed up, bring a new running smoothly.
- What You Get: 1 carburetor, 2 mounting gasket, 2 primer bulb, 1 air filter, 1 spark plug, 1 fuel filter, 3 fuel lines, 2 grommet, 1 vent. Our friendly and prompt customer service. Worthwhile to choose!
- See more on Amazon...
Brand: HOODELL | Manufacturer: HOODELL
See On Amazon #12
Mission Automotive 2 Pack Hose Bender for Racing Fuel Tanks, Utility Containers, Gas Cans - Heavy Duty - Compatible with VP, Sportsman, Rural King and more. Provides the Ideal Bend for Your Fuel Hose
Asin: B07XDDH7HD | Ean: 0850008283369 | UPC: 850008283369
Bends Hose To Perfect Angle: Gives You That “Extra Hand” In Refilling Tanks By Bending The Hose To The Perfect Angle, Leaving You To Easily Lift The Utility Container, Gas Can Or Jug..
Great Value: Our Package Comes With Two Durable Hose Benders That Can Be Used One At A Time Or Both At The Same Time Depending On The Angle Needed To Refill Tanks. Plus, It Comes With The Added Benefit Of Saving On Costly Fuel Spillage..
Easy And Precise Refilling Of Tanks: Fill In A Fraction Of The Time. Our Hose Bender Makes Refilling Tanks And Jugs A Breeze And Make Awkward, Back-Breaking And Messy Tank Filling A Thing Of The Past..
Durable And Gas-Resistant: A Little Thicker. A Little Longer. A Whole Lot Longer Lasting. Made With Heavy Duty Petroleum-Resistant Plastic That Makes It More Durable And Long Lasting. You Really Have To Try To Break This Bad Boy!.
Features
- Fill Faster & Easier: Cleverly designed to bend the hose of containers and jugs to the optimum angle for refilling tanks or refueling dirt bikes, mowers, cars, trucks and boats. Compatible with LC2 Racing Utility Containers, VP Racing and other Containers and Jugs.
- Durable And Gas-Resistant: A little thicker. A little longer. A whole lot longer lasting. Made with heavy duty petroleum-resistant plastic that makes it more durable and long lasting. You really have to try to break this bad boy!
- Bends Hose To Perfect Angle: Gives you that extra hand in refilling tanks by bending the hose to the perfect angle, leaving you to easily lift the utility container, gas can or jug.
- Easy And Precise Refilling Of Tanks: Fill in a fraction of the time. Our hose bender makes refilling tanks and jugs a breeze and make awkward, back-breaking and messy tank filling a thing of the past.
- Great Value: Our package comes with two durable hose benders that can be used one at a time or both at the same time depending on the angle needed to refill tanks. Plus, it comes with the added benefit of saving on costly fuel spillage.
- See more on Amazon...
Brand: Mission Automotive | Manufacturer: Mission Automotive
Weight: 0.00 Pounds
See On Amazon #13
Gas Cap, Fuel Cap For Honda Civic, Accord, Pilot, CRV/CR-V, Crosstour, Fit, Odyssey, Insight, HRV/HR-V, Replaces 17670-T3W-A01,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020
Asin: B08ZCT4P9H | Ean: 0782901674701 | UPC: 782901674701
【Compatible With Honda】Fuel Cap Compatible With Honda 2009-2020 Fit (Except 2014) | 2016-2020 Hr-V Hrv | 2010-2014 Insight | 2011-2017 Odyssey | 2009-2015 Pilot.
【Customer Service】If For Any Reason At All, You're Not 100% Satisfied With The Fuel Cap, Simply Return It For A Full Refund In 30 Days..
【Excellent Function】High Quality Materials, Fuel Tank Cap Must Take 100% Inspected And Tested Multiple Times Before The Shipment, Gas Cap Is Constructed Of Premium Material For Long Lasting Durability And Reliability. Direct Replacement, Easy Installation..
【Compatible With Honda】Gas Cap Compatible With Honda 2008-2017 Accord (Excludes Hybrid) | 2010-2015 Accord Crosstour | 2006-2015 Civic | 2007-2016 Cr-V Crv.
Features
- GAS CAP / FUEL CAP COMPATIBLE WITH 17670-T3W-A01, 17670T3WA01, Gas Cap Is 100% Rigorously Tested Before Shipping. Check The Part Number To Confirm The Compatibility Before Purchase.
- COMPATIBLE WITH HONDA Gas Cap Compatible With HONDA 2008-2017 Accord (Excludes Hybrid) | 2010-2015 Accord Crosstour | 2006-2015 Civic | 2007-2016 CR-V CRV
- COMPATIBLE WITH HONDA Fuel Cap Compatible With HONDA 2009-2020 Fit (EXCEPT 2014) | 2016-2020 HR-V HRV | 2010-2014 Insight | 2011-2017 Odyssey | 2009-2015 Pilot
- EXCELLENT FUNCTION High Quality Materials, Fuel Tank Cap Must Take 100% Inspected And Tested Multiple Times Before The Shipment, Gas Cap Is Constructed Of Premium Material For Long Lasting Durability And Reliability. Direct Replacement, Easy Installation.
- CUSTOMER SERVICE If For Any Reason At All, You'Re Not 100% Satisfied With The Fuel Cap, Simply Return It For A Full Refund In 30 Days.
- See more on Amazon...
Brand: ROVIKE | Manufacturer: ROVIKE
See On Amazon #14
CM Concepts Gas/Water Can Long Angled Spill-Free Spout Nozzle & Vent Replacement Kit w/Filter Screen Old Style (2)
Asin: B07DD1FZNY | Model: 50-5154 | PartNumber: 50-5154 | Ean: 0671839413714 | UPC: 671839413714
Push-In Vent Included For Faster And Safer Emptying; Use The Existing Hole Or Drill Your Own- 1/2"..
Each Kit Includes: (1) Flexible Spout, (1) Spout Cap, (1) "O" Ring Gasket And Filter Screen, (2) Base Caps, (1) Push-In Vent Cap (For Standard 1/2" Hole). 2 Kits Included..
1 Yr. Warranty Against Defects Under Normal Use. U.S Support..
Not Compatible With Non-Standard Cans Including Chilton, Craftsman, Anchor, No-Spill, F-Style Jugs & Racing Jugs Unless Used With Adapter. Fits Some Metal Cans-Those That Use A Standard-Size Base Cap Like Some Scepter & Briggs Models. Others May Require Adapter. Please Note This Is Not An Exhaustive List..
Maximum Compatibility: Designed In The U.S For U.S Cans. 2 Different Styles Of Base Caps (Approx. 1.75" D) Included For Maximum Compatibility. Fits Scepter, Gott, Briggs, Blitz, Rubbermaid, Midwest, Eagle, Igloo & Many Others..
Filter Screen/Flame Arrestor Included To Keep Debris/Dirt Out Of The Fuel Tank & Vapors Out Of The Can..
Features
- SPILL-FREE, EASY POURING: Unique long, angled design allows for easy, spill-free filling of lawn mowers, vehicles, boats & other gas-powered equipment.
- FILTER SCREEN/FLAME ARRESTOR included to keep debris/dirt out of the fuel tank & vapors out of the can.
- PUSH-IN VENT included for faster and safer emptying; use the existing hole or drill your own- 1/2.
- MAXIMUM COMPATIBILITY: Designed in the U.S for U.S cans. 2 different styles of base caps (approx. 1.75 D) included for maximum compatibility. Fits Scepter, Gott, Briggs, Blitz, Rubbermaid, Midwest, Eagle, Igloo & many others.
- 1 YR. WARRANTY against defects under normal use. U.S support.
- Not compatible with non-standard cans including Chilton, Craftsman, Anchor, No-Spill, F-Style jugs & racing jugs unless used with adapter. Fits SOME metal cans-those that use a standard-size base cap like some Scepter & Briggs models. Others may require adapter. Please note this is not an exhaustive list.
- Each kit includes: (1) flexible spout, (1) spout cap, (1) O ring gasket and filter screen, (2) base caps, (1) push-in vent cap (for standard 1/2 hole). 2 Kits included.
- See more on Amazon...
Brand: CM Concepts | Manufacturer: Gino Development
See On Amazon #15
Gas Can Spout Replacement I Gas Can Nozzle 1/2/5/10 Gallon Gas Can Replacement, Gas Can Spout Kit with Flexible Nozzles, Thicker Gasket, Spout Cap, Gas Can Cap and Fuel Vent Caps-Fits Most of The Cans
Asin: B0C2HT6JF4 | Ean: 0810039559451 | UPC: 810039559451
High Quality And Easy To Use : These Gas Can Spouts Are Made From High-Quality Hdpe Materials That Ensure Excellent Durability And Flexibility, Making Them A Great Investment For Long-Term Use. The Spouts Also Come With Thicker And Wider Rubber Gaskets That Provide A Tight And Secure Fit To Prevent Spills And Leaks, Even When The Gas Can Is Turned Upside Down Or During Transport..
Easy And Versatile Installation: Our Gas Can Vent Caps Are Designed To Offer Smooth-Flowing Gas With No Leaks. Whether You Have A 5 Gallon Gas Can Spout Replacement Without A Vent At The End Or One With A Vent Hole, Our Two Types Of Vent Caps Can Be Easily Installed To Provide The Perfect Fit. You Can Use Them For A Variety Of Gas-Powered Equipment, Including Lawnmowers, Generators, Boats, And More..
Assurance: Our Brand Stromguard Is Committed To Producing High-Quality Products And Guaranteeing The Satisfaction Of Our Customers' Comfort, Which Is Our Core Value. Please Contact Us With Any Questions Or Stories About Our Gas Can Spout Replacement Kit..
No Spill Gas Can Spout Replacement: Our Gas Can Nozzle Replacement Is Designed To Prevent Overflow And Spills. The Hexagonal Screw Cap Of The Spout Cap, Combined With The Threaded Spout Tube And Cap, Ensures A Secure Fit. The Interior Of The Spout Cap Also Features A Rubber Sealing Ring To Provide An Extra Layer Of Protection To This Universal Gas Can Spout..
Gas Can Spout Replacement : This Comprehensive Kit Of Gas Can Spout Replacement Is A Must-Have For Anyone Who Regularly Handles Gas Cans Of Various Sizes. Gas Can Spout Replacement I Gas Can Nozzle 1/2/5/10 Gallon Gas Can Replacement, Gas Can Spout Kit With Flexible Nozzles, Thicker Gasket, Spout Cap, Gas Can Cap And Fuel Vent Caps-Fits Most Of The Cans..
Features
- **IMPORTANT** - Please utilize the included stand alone hexagon circle cap that screws onto the spout.
- GAS CAN SPOUT REPLACEMENT : This comprehensive kit of gas can spout replacement is a must-have for anyone who regularly handles gas cans of various sizes. Gas Can Spout Replacement I Gas Can Nozzle 1/2/5/10 Gallon Gas Can Replacement, Gas Can Spout Kit with Flexible Nozzles, Thicker Gasket, Spout Cap, Gas Can Cap and Fuel Vent Caps-Fits Most of The Cans.
- HIGH QUALITY AND EASY TO USE : These gas can spouts are made from high-quality HDPE materials that ensure excellent durability and flexibility, making them a great investment for long-term use. The spouts also come with thicker and wider rubber gaskets that provide a tight and secure fit to prevent spills and leaks, even when the gas can is turned upside down or during transport.
- NO SPILL GAS CAN SPOUT REPLACEMENT: Our gas can nozzle replacement is designed to prevent overflow and spills. The hexagonal screw cap of the spout cap, combined with the threaded spout tube and cap, ensures a secure fit. The interior of the spout cap also features a rubber sealing ring to provide an extra layer of protection to this universal gas can spout.
- EASY AND VERSATILE INSTALLATION: Our gas can vent caps are designed to offer smooth-flowing gas with no leaks. Whether you have a 5 gallon gas can spout replacement without a vent at the end or one with a vent hole, our two types of vent caps can be easily installed to provide the perfect fit. You can use them for a variety of gas-powered equipment, including lawnmowers, generators, boats, and more.
- ASSURANCE: Our brand Stromguard is committed to producing high-quality products and guaranteeing the satisfaction of our customers' comfort, which is our core value. Please contact us with any questions or stories about our Gas Can Spout Replacement kit.
- See more on Amazon...
Brand: STROMGUARD
See On Amazon #16
Arnold Engine Parts Universal Gas Cap (GC-300)
Asin: B000BQM0LU | Model: GC-300 | PartNumber: GC-300 | Ean: 0043972694129, 0796084358617, 0037049925209, 5133330265643 | UPC: 796084358617, 037049925209, 043972694129
Package Weight: 0.068 Kilograms.
Replacement Gas Cap For Ariens, Craftsman, Husqvarna, John Deere, Mtd, Poulan And Poulan Pro And Most Tractors With A 2-1/8" Diameter Gas Tank Opening..
Contents Include One 2-1/8 In. Diameter Vented Gas Cap With Liner..
Power Source Type: Wood.
Universal 2-1/8 In. Vented Gas Cap For Lawn Tractors, Replaces Oe# 751-0603, 01538400, 795027, 539914363, 7012515Yp, Gx22166.
Country Of Origin : United States.
Package Dimensions: 10.922 H X 3.556 L X 10.16 W (Centimetres).
Features
- Replacement universal gas cap for tractor engines
- Package Dimensions: 10.922 H x 3.556 L x 10.16 W (centimetres)
- Package Weight: 0.068 kilograms
- Country of Origin : United States
- Power source type: wood
- Universal 2-1/8 in. Vented Gas Cap for Lawn Tractors, Replaces OE# 751-0603, 01538400, 795027, 539914363, 7012515YP, GX22166
- Replacement gas cap for Ariens, Craftsman, Husqvarna, John Deere, MTD, Poulan and Poulan Pro and most tractors with a 2-1/8 diameter gas tank opening.
- Contents include one 2-1/8 in. diameter vented gas cap with liner.
- See more on Amazon...
Brand: Arnold | Manufacturer: Arnold Corporation
Dimensions: 1.50 x 6.50 x 4.75 inches
See On Amazon #17
6 Kit 37PCS Gas Can Spout Replacement Set, Gas Can Nozzle 5 Gal 6 Bendable Tubes 6 Screw Collar Coarse Thread &6Fine Thread-Fits Most of The Cans,6 Threaded caps,6 Vent Caps 1 Drill Lid (37)
Asin: B0B9FZ82V5 | Model: p009 | PartNumber: p009 | Ean: 0768461906957 | UPC: 768461906957
Simple To Install: Gas Can Spout Replacement Kit Includes Complete Package: 6 X Screw Caps (1 Coarse Thread And 1 Fine Thread),6X Yellow Nozzle And Rubber Gasket,6X Threaded Nozzle Cap,12X Gas Tank Vent Caps,6X Tube Cap,1X Drill.
We Offer Two Types Of Gas Con Vent Caps,One Is Used For Oil Cans Without A Vent At The End Of The Oil Can, All You Need Is A Simple Drilling And Installation And Ready To Use.Another Is Used For Another Oil Can With A Vent Cap At The Tail, Can Replace Old Vent Caps.You Don't Have To Go Through The Hassle Of Replacing Your Old Gas Tank. By Replacing The Nozzle And Vent Kit，Helping You Save Your Old Gas Can Instead Of Buying A New One.
The Spout Cap Tube And The Spout Are Threaded, Every The Spout Cap Has A Thick Rubber Sealing Ring Inside. As Long As You Tighten The Nozzle Cap. No Oil Spills, Even In The Case Of Transport Or A Tank Topped Down..
High Quality: These Gas Can Spout Are Made Of Hdpe Plastic（Same As 10 5 Gallon Gas Can Plastic）, Which Are Bendable And Long Term Use. Thicker And Widened Rubber Gaskets, Can Better Fit The Gasoline Container, Longer Service Life，Safe Without Leakage.
Features
- 37pcs(6 Kit-Yellow)Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans 12 * screw collar caps are all 1.75inch, 6 of them are coarse threads and the other 6 are fine threads. Please check your gas can outside thread diameter before you make this purchase as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks
- HIGH QUALITY: these gas can spout are made of HDPE plastic same as 10 5 gallon gas can plastic , which are bendable and long term use. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life Safe without leakage
- Simple to install: Gas can spout replacement kit includes complete package: 6 x screw caps (1 coarse thread and 1 fine thread),6x yellow nozzle and rubber gasket,6x Threaded Nozzle Cap,12x Gas Tank Vent Caps,6x Tube cap,1X drill
- The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down.
- We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oil can with a vent cap at the tail, Can replace old vent caps.you don't have to go through the hassle of replacing your old gas tank. By replacing the nozzle and vent kit helping you save your old gas can instead of buying a new one
- See more on Amazon...
Brand: Pftjujudan | Manufacturer: ptf
Dimensions: 3.00 x 10.00 x 8.00 inches
See On Amazon #18
Magicfour Fuel Gas Can Vent Caps, 6 Pack Fuel Gas Tank Vent Caps Gas Can Replacement Vent Plug Gas Jug Vent Caps for Gas Fuel Water Can Jug to Allow Faster Flowing
Asin: B08747LWC4 | Ean: 0793740144720 | UPC: 793740144720
Vent Cap: Fuel Can Air Vent Caps Can Be Used For All Kinds Of 3 Or 5 Gallon Gas Can Or Other Plastic Gas Or Water Can, Provide A Vent And Make The Fuel Or Water Pour Out Quickly And Smoothly..
Packing List: The Package Will Come With 6 Pieces Gas Can Vent Caps, 1 Piece Drill, 1 Piece Wire,1 Piece Wrench And 6 Pieces Stickers..
Easy Operation: Simple To Install The Valve Stem And Rubber Sealing Ring Onto The Can Via A Wire After Drilling A Hole Through The Can, Then Screw On The Dust Cap Finished.(It's Better To Drill A Hole On High And Back Of The Can, Avoiding The Handle Because It's Thicker.).
Leak Proof Design: Gas Can Replacement Vent Cap Is Designed With Screw Caps And Double Rubber Sealing Rings That Can Ensure Leak Proof..
Features
- Premium Material: Universal gas can vent cap is made of premium stainless steel and premium rubber, rustproof and durable.
- Leak Proof Design: Gas can replacement vent cap is designed with screw caps and double rubber sealing rings that can ensure leak proof.
- Vent Cap: Fuel can air vent caps can be used for all kinds of 3 or 5 gallon gas can or other plastic gas or water can, provide a vent and make the fuel or water pour out quickly and smoothly.
- Easy Operation: Simple to install the valve stem and rubber sealing ring onto the can via a wire after drilling a hole through the can, then screw on the dust cap finished.(It's better to drill a hole on high and back of the can, avoiding the handle because it's thicker.)
- Packing List: The package will come with 6 pieces gas can vent caps, 1 piece drill, 1 piece wire,1 piece wrench and 6 pieces stickers.
- See more on Amazon...
Brand: Magicfour | Manufacturer: Magicfour
Dimensions: 0.50 x 4.72 x 2.36 inches
See On Amazon #19
VP Racing Fuels 3044 Deluxe Filler Hose
Asin: B005G5R5LQ | Model: 3044 | PartNumber: 3044 | Ean: 0846781000316, 7262318385252, 0846781000361, 4684505040721, 7355117416033 | UPC: 846781000361, 846781000316
Forms A Water-Tight Seal With The Rubber Gasket That Provides Secure Pouring And Precise Pouring For Added Convenience.
Get The Most Out Of Your Motorsport Or Sportsman Containers; Dimensions (L X W X H): 14.8 X 1 X 1 Inches; Weight: 3.2 Ounces.
Perfect For Use With Refilling In Professional Off-Road And Closed-Course Racing, Not For Fuel Used On Highways; Not To Be Used With Gasoline Or Street-Legal Fuels.
Perfect For Use With Refueling In Professional Off-Road And Closed-Course Racing As Well As For Moving Industrial Oils And Fluids.
Features
- Deluxe, 14-inch hose kit for VP Motorsport and VP Sportsman containers; Hose cap included
- Perfect for use with refueling in professional off-road and closed-course racing as well as for moving industrial oils and fluids
- Forms a water-tight seal with the rubber gasket that provides secure pouring and precise pouring for added convenience
- Perfect for use with refilling in professional off-road and closed-course racing, not for fuel used on highways; Not to be used with gasoline or street-legal fuels
- Get the most out of your Motorsport or Sportsman containers; Dimensions (L x W x H): 14.8 x 1 x 1 inches; Weight: 3.2 ounces
- See more on Amazon...
First Available: 04/15/2015
Brand: VP Racing | Manufacturer: Plastic Product Formers
Dimensions: 1.00 x 14.75 x 1.00 inches | Weight: 0.00 Pounds
See On Amazon #20
Gas Can Spout Replacement, Gas Can Nozzle (6Kit-Yellow) With 12 Screw Collar Caps(6 Coarse Thread &6 Fine Thread-Fits Most of The Cans) With Gas Can Vent Caps, Thick Rubber Pad, Spout Cover, Base Caps
Asin: B0BMB294JF | Model: FOANRIY-Y01 | PartNumber: FOANRIY-Y01 | Ean: 0046432116636 | UPC: 046432116636
Anti-Overflow Design,(Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Con Spout Cap Is Hexagonal)The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down.
Simple To Install,Each Set Of Products Includes,12 Screw Collar Caps(6 Coarse Thread & 6 Fine Thread) 6 Yellow Spouts And Rubber Gaskets, 6 Nozzle Caps With Threads，2 Kinds Of Gas Con Vent Caps . And The Drill Bit Needed To Install The Gas Con Vent Caps . During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible.
Can Cover More Oil Cans, We Provide Two Oil Cans With Vent Caps,(Gas Con Vent Caps-A Is Used For Oil Cans Without A Vent At The End Of The Oil Can,All You Need Is A Simple Drilling And Installation And You Are Ready To Use) (Gas Con Vent Caps-B Is Used For Another Oil Can With A Vent Cap At The Tail , Can Replace Old Vent Caps).
High-Quality Materials, These Gas Can Nozzle Replacement Parts Are Made Of High-Quality Hdpe Materials,In Use, You Can Bend Freely Without Breaking.Thicker And Widened Rubber Gaskets,Can Better Fit The Bottle Cap,Prevent Liquid Leakage When Refueling.
Features
- Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling
- Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down
- Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps)
- Simple to install,Each set of products includes,12 Screw Collar Caps(6 Coarse Thread & 6 Fine Thread) 6 yellow Spouts and rubber gaskets, 6 nozzle caps with threads 2 kinds of gas con vent caps . And the drill bit needed to install the gas con vent caps . During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible
- See more on Amazon...
Brand: FOANRIY | Manufacturer: FOANRIY
Warranty: Yes
See On Amazon
Looking For Something Else?
Search