1.54 Inch OLED Module 12864 128x64 SSD1309 Driver IIC I2C Serial Interface Self-Luminous Display Board for Raspberry Pi 4 Pin Blue
Asin: B0CHDQ8LCT | Ean: 0687117710697 | UPC: 687117710697
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Self-Luminous Design: No Backlight Is Required, The Display Can Self-Luminous; It Has High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable..
Application:1.54 Inch Oled Module Supports Many Chips: Compatible With R3 Board And Mega, For Raspberry Pi, 51 Mcu, Stim 32, Etc..
There Are No Fonts Embedded In The Oled Controller, Users Can Create Fonts Through The Font Generation Software..
Embedded Driver Ic: Ssd1309, Communication: I2c/Iic Interface, Only Need 2 I/O Ports..
Features
- 1.54inch OLED Display: Resolution: 128 x 64 Pixel, View angle: > 160 , Support voltage: DC 3.3V-5V Power consumption: 0.04W during normal operation, full screen lit 0.08W.
- Embedded Driver IC: SSD1309, Communication: I2C/IIC Interface, only need 2 I/O ports.
- Self-luminous Design: No backlight is required, the display can self-luminous; It has high contrast, bright and crisp dots, even tiny fonts quite readable.
- There are no fonts embedded in the OLED controller, users can create fonts through the font generation software.
- Application:1.54 inch OLED module supports many chips: compatible with R3 board and Mega, for Raspberry pi, 51 MCU, STIM 32, etc.
- See more on Amazon...
Brand: Coliao | Manufacturer: Coliao
Dimensions: 0.39 x 2.36 x 1.57 inches
See On Amazon Similar To 1.54 Inch OLED Module 12864
#1
Hosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi(Blue and Yellow)
Asin: B09C5K91H7 | Ean: 0761344888470 | UPC: 761344888470
It Compatibles With R3 Board And Mega, Raspberry Pi, 51 Mcu, Stim 32, Etc..
There Are No Fonts Embedded In The Oled Controller, Users Can Create Fonts Through Font Generation Software..
No Backlight Is Required, And The Display Unit Can Be Self-Luminous. It Has Ultra-High Contrast, Bright And Clear Dots, And It Is Easy To Read Even Small Fonts.
Embedded Driver Ic: Ssd1306. Communication: I2c/Iic Interface, Only Need Two I / O Ports.
Features
- 0.96 inch,Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- It compatibles with R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Dimensions: 0.11 x 1.09 x 1.07 Inches | Weight: 0.09 Pounds
Warranty: NO
See On Amazon #2
UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico
Asin: B072Q2X2LL | Model: U602602 | PartNumber: U602602
Embedded Driver Ic: Ssd1306. Communication: I2c/Iic Interface, Only Need Two I / O Ports.
No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software. We Offer Technical Support And Software Library As Well As The Guide Book In The Package. Note: The Display Part Is 15Mm±0.5 Tall..
Need More Than 1 Pc? Please Refer To Asin: B08ky21sr2 (2Pcs).
Needn't Backlight, The Display Unit Can Self-Luminous. It Has Super High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.
Resolution: 128 X 64, View Angle: > 160°, Support Voltage: 3.3V-5V Dc, Power Consumption: 0.04W During Normal Operation, Full Screen Lit 0.08W.
Features
- UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
- Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package. Note: the display part is 15mm 0.5 tall.
- Need more than 1 pc? Please refer to Asin: B08KY21SR2 (2pcs)
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.00 pounds
See On Amazon #3
Hosyond 3pcs I2C IIC 1602 LCD Display Module 16x02 LCD Screen Module for Arduino Raspberry Pi
Asin: B0BWTFN9WF | Ean: 0732214748071 | UPC: 732214748071
Power Supply: 5V; I2c Address: 0X27; Wiring Method: Gnd—Gnd, Vcc—Vcc, Sda—A4, Scl—A5..
Widely Used In: Internet Of Things, School Electronics Projects, Smart Buildings, Maker Diy Projects, Etc., Can Display Letters, Characters, Numbers, Real-Time Clock Or Temperature..
Compatible With Most Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32, Etc..
Built-In Independent Potentiometer, Backlight Can Be Adjusted Through The Back Potentiometer..
Features
- 1602 LCD screen can display 2 lines x 16 characters, with i2c serial interface, blue display.
- Built-in independent potentiometer, backlight can be adjusted through the back potentiometer.
- Power supply: 5v; I2C address: 0x27; wiring method: GND GND, VCC VCC, SDA A4, SCL A5.
- Compatible with most development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32, etc.
- Widely used in: Internet of Things, school electronics projects, smart buildings, maker DIY projects, etc., can display letters, characters, numbers, real-time clock or temperature.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Warranty: Hosyond
See On Amazon #4
GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Blue Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things
Asin: B07S7PJYM6 | Ean: 0703501205768 | UPC: 703501205768
Compatible With All Current Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32 And So On.
With A Potentiometer Used To Adjust Backlight (Color: Blue) And Contrast.Power Supply: 5V And I2c Address Is: 0X27 Module Dimension: 80Mm X 35Mm X 11Mm.
Commonly Used In: Internet Of Things, Diy Project, Home Animation, Smartbuilding, Maker's Diy Project..
Features
- Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.
- Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project.
- Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on
- With a potentiometer used to adjust backlight (Color: Blue) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Dimensions: 0.28 x 3.15 x 1.22 inches
See On Amazon #5
Hosyond 5 Pcs 0.91 Inch I2C OLED Display Module IIC OLED Screen DC 3.3V~5V Compatible with Arduino Raspberry PI (White Display Color)
Asin: B09MZ8DW4R | Ean: 0761325160571 | UPC: 761325160571
Compatible With Arduino Nano, R3 Board, Raspberry Pi 4B/3B+/3B/2B/Zero,Esp8266, Esp32, Stm32, Etc..
What Will You Get: There Are 5 Pieces Oled Display Module Oled Display Module For You..
Working Power:3.3-5V, Operating Temperature: -40 - 85 ℃..
Low Power Consumptio; Ssd 1306 Oled Display; I2c Oled Display, Iic (I2c Communications) Simplifies Connection..
Features
- Resolution: 128 x 32 0.91 Inch OLED display, no need backlight, self-illumination, Display Color: White.
- Low power consumptio; SSD 1306 oled display; I2C oled display, IIC (I2C communications) simplifies connection.
- Compatible with Arduino nano, R3 board, Raspberry Pi 4B/3B+/3B/2B/Zero,ESP8266, ESP32, STM32, etc.
- Working power:3.3-5v, Operating temperature: -40 - 85 .
- What will you get: there are 5 pieces OLED display module OLED display module for you.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Dimensions: 0.12 x 1.57 x 0.38 Inches | Weight: 0.04 pounds
See On Amazon #6
SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield Compatible with Arduino R3 MEGA (IIC 2004)
Asin: B01GPUMP9C | Model: 8541582407 | PartNumber: 8541582407 | Ean: 0743447130144, 0701715368224 | UPC: 701715368224, 743447130144
Iic/I2c Interface; Only Takes Two I/O Ports..
Professonal Support: Sunfounder Customer Service Team Are Always Willing To Solve Any Question From Our Customers .Any Problem, Please Contact Us On Amazon..
I2c Address: 0X27 Or 0X3f.Compatible With Arduino R3/2560 Board. Http://Wiki.Sunfounder.Cc/Index.Php?Title=I2c_Lcd2004.
Working Voltage: 5V Dc; Dimension: 60×99X22 Mm..
Features
- Sunfounder I2C LCD 2004 displays characters of 4 rows with 20 characters in each.
- Working voltage: 5V DC; Dimension: 60 99x22 mm.
- IIC/I2C interface; only takes two I/O ports.
- I2C Address: 0x27 or 0x3F.Compatible with Arduino R3/2560 board. http://wiki.sunfounder.cc/index.php?title=I2C_LCD2004
- Professonal Support: SunFounder customer service team are always willing to solve any question from our customers .Any problem, please contact us on Amazon.
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.20 x 7.50 x 5.00 inches | Weight: 0.19 pounds
See On Amazon #7
5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V
Asin: B08CDN5PSJ | Model: Frienda-d'Affichage-02 | PartNumber: Frienda-d'Affichage-02
More Details: Use Compatible With Arduino, Esp8266, Stm32, Etc.; 3.35V Power; Operating Temperature: -40 - 85 Degree; Resolution: 128 X 32.
Product Manual: As Shown In The Instructions.
Good Compatibility: This I2c Oled Display Module Is Compatible With Raspberry Pi 4B/3B+/3B/2B/Zero, Compatible With Arduino, Also Compatible With Esp8266, Stm32, Etc..
Power-Saving Display: The I2c Oled Display Performs Better Than The Traditional Lcd Display And With Lower Consumption The Iic (I2c Communications) Simplifies Connections; Please Note That These I2c Oled Display Module Comes Without Pin Headers.
Features
- What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight
- Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections; Please note that these I2C OLED display module comes without pin headers
- More details: use compatible with Arduino, ESP8266, STM32, etc.; 3.35v Power; Operating temperature: -40 - 85 degree; Resolution: 128 x 32
- Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, STM32, etc.
- Product manual: as shown in the instructions
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
See On Amazon #8
HiLetgo 3.5" TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560
Asin: B073R7Q8FF | Model: 3-01-1434 | PartNumber: 3-01-1434
Onborad Level Conversion Chip For 5V/3.3V Mcu.
Compatible With Arduino-Series Development Board. (Please Notice:This Screen Is Not Touch Screen).
Compatible With 3.3/5V Operation Voltage Level.
Support Arduino Mega2560 Directly Inserted.
Features
- 3.5" TFT LCD Display ILI9486/ILI9488 480x320 Suitable for MEGA2560
- Support Arduino Mega2560 Directly inserted
- OnBorad level conversion chip for 5V/3.3V MCU
- Compatible with 3.3/5V operation voltage level
- Compatible with Arduino-Series development Board. (Please notice:This Screen is not touch screen)
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #9
HiLetgo 1.44" Colorful SPI TFT LCD Display ST7735 128X128 Replace 5110/3310 LCD
Asin: B073R6SQRY | Model: 3-01-1435 | PartNumber: 3-01-1435
Communication Interface: Spi.
Driver: St7735.
Size: 1.44 Inch Spi Serial Bus.
Features
- Display Resolution: 128X128
- Size: 1.44 inch SPI serial bus
- Communication Interface: SPI
- Driver: ST7735
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #10
HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 with PCB 5V/3.3V STM32
Asin: B073R7BH1B | Model: 3-01-1433 | PartNumber: 3-01-1433
Viewing Direction: 6 O’Clock.
With Pcb Plate (Including Power Supply Ic, Sd), Compatible With 5110 Interface.
Pixel Arrangement: Rgb Vertical Stripe.
Resolution (Dots): 240Rgb*320Dots.
Features
- Driver element: a-Si TFT active matrix
- Resolution (dots): 240RGB*320Dots
- Viewing Direction: 6 o clock
- Pixel arrangement: RGB vertical stripe
- With PCB plate (including power supply IC, SD), compatible with 5110 interface
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #11
HiLetgo 0.95" Inch 7 Pin Colorful 65K SPI OLED Display Module SSD1331 96 * 64 Resolution for Arduino 51 STM32
Asin: B0711RKXB5 | Model: 3-01-1401 | PartNumber: 3-01-1401
0.95 Inch Colorful Oled.
Easy To Set Up: Easy To Work With And Requires No Soldering For The Header Pins.
Draw Speed Is Responsive.
Resolution:96*64.
Features
- Main Driver:SSD1331
- Resolution:96*64
- 0.95 inch Colorful OLED
- Draw speed is responsive
- Easy to Set Up: Easy to work with and requires no soldering for the header pins
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #12
Hosyond 3.2 Inches TFT LCD Touch Screen Shield Display Module 320x240 SPI Serial ILI9341 with Touch Pen Compatible with Arduino R3/Mega2560 Development Board
Asin: B0B1M9S9V6 | Ean: 0782917535515 | UPC: 782917535515
Compatible With Arduino R3/Mega Controller Board,Which Will Improve Your Project Operations..
4-Wire Spi Serial,Built-In Ili9341driver Ic And Power Supply Ic..
There Is A Sd Card Socket On The Back Of This Screen..
Support Touch Screen Function, With Touch Pen Inside That You Can Use It More Easily..
Features
- 3.2 inches 320x240 pixels RGB colorful display lcd screen.
- Support touch screen function, with touch pen inside that you can use it more easily.
- Compatible with Arduino R3/Mega controller board,which will improve your project operations.
- There is a SD card socket on the back of this screen.
- 4-wire SPI Serial,built-in ILI9341driver IC and power supply IC.
- See more on Amazon...
Brand: Hosyond | Manufacturer: Hosyond
Weight: 0.16 pounds
Warranty: Hosyond
See On Amazon #13
GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Yellow Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things
Asin: B0BCWFB5P3
Compatible With All Current Development Boards, Such As Arduino, Raspberry Pi, Tinkerboard, Nano Pi, Banana Pi, Stm32 And So On.
Wiki:Http://Wiki.52Pi.Com/Index.Php?Title=1602_Serial_Lcd_Module_Display_Sku:Z-0234.
With A Potentiometer Used To Adjust Backlight (Color: Yellow) And Contrast.Power Supply: 5V And I2c Address Is: 0X27 Module Dimension: 80Mm X 35Mm X 11Mm.
Commonly Used In: Internet Of Things, Diy Project, Home Animation, Smartbuilding, Maker's Diy Project..
Features
- Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful.
- Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project.
- Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on
- With a potentiometer used to adjust backlight (Color: Yellow) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm
- Wiki:http://wiki.52pi.com/index.php?title=1602_Serial_LCD_Module_Display_SKU:Z-0234
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Warranty: no
See On Amazon #14
MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Ar duino
Asin: B079BN2J8V | Model: 8541549353 | PartNumber: 8541549353 | Ean: 0702646045932 | UPC: 702646045932
The Display Performance Is Better Than The Traditional Lcd Display, Also Lower Consumption; Ssd 1306 Oled Display; I2c Oled Display, Iic (I2c Communications) Simplifies Connections.
We Have A Strong After-Sales Service Team: As Long As You Have Any Questions About The Product, We Will Resolve Your Issue Immediately If Received Your Email, Your Satisfactory Purchase Experience Is Our Greatest Hope! How To Email Us? Plz Click “Makerfocus” And Click “Ask A Question” To Email Us! Looking Forward To Your Consultation!.
Use With Ar Duino, Esp8266, Esp32, Stm32, Etc; 3.35V Power; Operating Temperature:-40 - 85 ℃.
128X32 Oled Display, No Need Backlight, Self-Illumination, Display Color: White. Plz Note: These I2c Oled Display Modules Come Without Pin Headers.
Features
- Product Manual: Please get the link from the product description below
- 128x32 OLED display, no need backlight, self-illumination, Display Color: White. Plz note: These I2C OLED Display Modules come without pin headers
- The display performance is better than the traditional LCD display, also lower consumption; SSD 1306 oled display; I2C oled display, IIC (I2C communications) simplifies connections
- Use with Ar duino, ESP8266, ESP32, STM32, etc; 3.35v Power; Operating temperature:-40 - 85
- We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click MakerFocus and click Ask a question to email us! Looking forward to your consultation!
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.39 x 1.50 x 2.76 inches | Weight: 0.02 pounds
Warranty: No Warranty
See On Amazon #15
HiLetgo 0.91" IIC I2C Serial OLED LCD Display SSD1306 128x32 3.3V/5V AVR PIC for Arduino STM32
Asin: B01N0KIVUX | Model: 3-01-1259 | PartNumber: 3-01-1259
High Resolution Oled For Any Of Your Micro Controller Projects, 128X32 Pixels Gives You A Nice Sharp, Crisp Text Output..
The Display Can Run On 3.3V. It Is Legible, Even With 4 Lines Of Text. Highly Recommended For Projects That Require Some Form Of User Interface..
Use With Arduino, Esp8266, Esp32, Stm32, Etc. This Is A Really Good Way To Add A Very Compact Lcd To Your Project. No Need To Add Some Big Bulky Backlit Lcd..
The Display Performance Is Better Than The Traditional Lcd Display, It Uses The Very Common I2c Bus, And Runs On The Ssd1306 Display Driver..
Features
- OLED display, no need backlight, self-illumination, Display Color: White. Plz note: These I2C OLED Display Modules come without pin headers.
- The display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver.
- High resolution OLED for any of your micro controller projects, 128x32 pixels gives you a nice sharp, crisp text output.
- Use with Arduino, ESP8266, ESP32, STM32, etc. This is a really good way to add a very compact LCD to your project. No need to add some big bulky backlit LCD.
- The display can run on 3.3v. It is legible, even with 4 lines of text. Highly recommended for projects that require some form of user interface.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
HiLetgo 0.96" SSD1306 I2C IIC SPI Serial 128X64 OLED LCD Display 4 Pin Font Color White
Asin: B06XRBTBTB | Model: 3-01-1234-IIC-W | PartNumber: 3-01-1234-IIC-W | Ean: 6919608793556
Font Color: White.
High Resolution: 128 * 64.
Panel Size: 26.70Mm X 19.26Mm X 1.85Mm.
Drive Duty: 1/64 Duty.
Features
- 0.96" SSD1306 128X64 OLED LCD Display with I2C IIC SPI Serial
- Drive Duty: 1/64 Duty
- Font Color: White
- Panel Size: 26.70mm x 19.26mm x 1.85mm
- High resolution: 128 * 64
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #17
BIGTREETECH Mini12864 V2.0 LCD Graphic Smart Display Control Board with Adapter and Cable for Ender-3 VORON 2.4 Prusa-i3 3D Printer RAMPS 1.4 RepRap 3D Printer Mendel Prusa Arduino
Asin: B08P5LXR86 | Model: KINGPRINT-ZZB000475 | PartNumber: KINGPRINT-ZZB000475 | Ean: 0791568743491 | UPC: 791568743491
3.Product Comes Encoder Parameter Adjustment Can Be Achieved, And The File Selection Print..
5.Do Not Worry About The Problem Of After-Sales, If There Is Any Need, Get In Touch With Us, We Will Help You Solve It..
4.Plug And Play On The Ramps, But Need To Modify The Firmware To Support..
2.With A Sd Card Base On Back, Put Slicing File Into The Sd Card And Select The File On The Lcd, Then Can Be Printing..
Features
- 1.The Mini12864 display panel has RGB multi-color backlight and can support 8 RGB, which is even more cool.
- 2.With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing.
- 3.Product comes encoder parameter adjustment can be achieved, and the file selection print.
- 4.Plug and play on the RAMPS, but need to modify the firmware to support.
- 5.Do not worry about the problem of after-sales, if there is any need, get in touch with us, we will help you solve it.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 1.18 x 2.36 x 1.18 Inches | Weight: 0.11 pounds
See On Amazon #18
GeeekPi 2Pcs OLED Display Module I2C IIC 128X64 Pixel 0.96 Inch Display Module Yellow Blue Two-Color Display Compatible with Raspberry Pi Arduino 51 Series MCU STM32 R3 and Mega
Asin: B0B7RPCZ4Z
Support I2c Iic Communication Protocol,The Iic Address Can Be Changed,It Is Convenient To Use With Different Machines ..
Package Includes:2 X 0.96 Inch Oled Display Kits (Yellow Blue Two-Color), 8X Male To Femal Dupont Wire, 8X Female To Female Dupont Wire.
Pin Definitions: Gnd, Vcc, Scl, Sda;Pins: 4 Pins.
High Resoluton: 128*64 Pixels(Approx).
Features
- Fully compatible with Raspberry Pi, Arduino, 51 series, MSP430 Series, STM32/2, CSR IC, etc.
- High resoluton: 128*64 pixels(approx)
- Support I2c IIC communication Protocol,the IIC address can be changed,it is convenient to use with different machines .
- Pin Definitions: GND, VCC, SCL, SDA;Pins: 4 pins
- Package includes:2 x 0.96 inch OLED Display kits (Yellow Blue Two-Color), 8x Male to Femal Dupont Wire, 8x Female to Female Dupont Wire
- See more on Amazon...
Brand: GeeekPi | Manufacturer: GeeekPi
Weight: 0.07 pounds
Warranty: no
See On Amazon #19
HiLetgo 2pcs HD44780 IIC I2C1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino
Asin: B07W5KC65S | Model: 3-01-1498 | PartNumber: 3-01-1498
Operate Voltage: 5V.
Blue Backlight Lcd Module.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #20
Teyleten Robot 2.42 inch 128x64 OLED LCD Display Module SSD1309 7 Pin SPI/IIC I2C Serial Interface for Arduino UNO R3 - White Light
Asin: B09LND6QJ1 | Ean: 9339036069134
Spi Communication Or I2c Communication Can Be Switched By Configuring Three Resistors R3 R4 R5.
For Iic Communication, It Is Necessary To Move The Resistor On R4 To R3, And R5 Is Soldered With 0 Ohm Resistor..
Features
- Interface Selection: to choose SPI or IIC interface through R3, R4, R5
- For IIC communication, it is necessary to move the resistor on R4 to R3, and R5 is soldered with 0 ohm resistor.
- SPI communication or I2C communication can be switched by configuring three resistors R3 R4 R5
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.39 x 2.80 x 1.71 Inches
See On Amazon
Looking For Something Else?
Search