2pcs Lift Support Clamp Car Hood Strut Shock Prop Rod Stopper Retainer Tool Hood Stay Holder for Trunks Tailgate Hatch and Liftgate Black
Asin: B0CHYPB2Z8 | Ean: 0717206298451 | UPC: 717206298451
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Made Of High Quality Material Which Prevents Scratches Caused By Tightening Of The Clips..
Package Contents: 2 X Lift Support Clamp.
Place The Tool On The Lifting Rod Next To The Cylinder Block And Tighten It With The Knob Until It Is Fixed On The Lifting Rod..
This Hood Stay Holder Tool Can Be Used On The Hood, Tailgate Or Hatch Struts Of Most Cars, Especially In Cold Weather And Keep You From Potential Injury..
Features
- Lift support clamp fit up to 0.39" /10mm rod. It is widely used on the car hood, trunk, tailgate, liftgate, and any other equipment with gas shock springs.
- This hood stay holder tool can be used on the hood, tailgate or hatch struts of most cars, especially in cold weather and keep you from potential injury.
- Made of high quality material which prevents scratches caused by tightening of the clips.
- Place the tool on the lifting rod next to the cylinder block and tighten it with the knob until it is fixed on the lifting rod.
- Package Contents: 2 x Lift Support Clamp
- See more on Amazon...
Brand: HARIFOGER | Manufacturer: HARIFOGER
See On Amazon Similar To 2pcs Lift Support Clamp Car
#1
C1608054 20" Gas Prop Spring Strut 20 inch 100 Lb Per Shock C16-08054 for Camper Shell RV Bed Tonneau Cover Storage Box Basement Door Floor Hatch Window Lift Struts (Applicable Lid Weight 85-110LBs)
Asin: B07CGNQCCJ | Model: C1608054 | PartNumber: C1608054 | Ean: 0603728610751 | UPC: 603728610751
✅ C16-08054 Gas Props 20Inch -- Direct Replacement Struts For Rv Bed, Motorhome Bed, Tanning Bed, Camper Bed, Travel Trailer Bed Mattress, Queen Bed, Etc.;Note: Do Not Compress Them By Hands Before Installing, The Struts Could Only Be Compressed After Installing Successfully!!!.
✅100% Satisfaction Service -- 18 Months Support Comes With Every Arana Product; If Any Questions Before Purchasing Or Dissatisfactions After Purchasing Or Need Installing/Using Guide, Welcome To Click "Ask Seller" Besides Your Order From Arana For Immediate Assistance!.
✅ Arana C1608054 100 Lb Lift Supports -- Customer Will Also Use Them On Tonneau Cover, Heavy Camper Shell Roof, Tv Cabinet Door, Trailer Window, Compartment Door, Floor Hatch, Truck Cover, Bar Shed Window, Heavy Custom Build Lid, Etc; Very Strong, Do Not Buy Them For The Lid Weight Less Than 80 Pounds;.
✅ Arana 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [In]: 19.7(500Mm), Compressed Length B [In]: 11.8(300Mm), Interchange Number: 6939, 6939S10, C1608054, C16-08054; Measurement Of The Supported Lid Weight Or Of Your Old Strut Pressure Is Required To Prevent Purchasing Wrongly!.
Features
- ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!
- ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054; measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!
- C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc.;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!
- ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc; Very Strong, do not buy them for the lid weight less than 80 pounds;
- 100% Satisfaction Service -- 18 Months Support comes with every ARANA product; If any questions before purchasing or dissatisfactions after purchasing or need installing/using guide, welcome to click ASK SELLER besides your order from ARANA for immediate assistance!
- See more on Amazon...
Brand: ARANA | Manufacturer: Arana
See On Amazon #2
Pony Portable Folding Work Table, 2-in-1 as Sawhorse & Workbench, Load Capacity 1000 lbs-Sawhorse & 500 lbs-Workbench, 31 W 25 D 25 -32 H, with 4pcs Clamps, 4pcs Bench Dogs, 2pcs Safety Straps
Asin: B09XT8D9NY | Model: 99214AJ.JP | PartNumber: 99214AJ.JP | Ean: 0044295992145 | UPC: 044295992145
[Height Adjustable] Folding Workbench Can Be Adjusted At Six Different Heights - From 30" To 35" To Adapt To Various Work Scenarios(Garage, Lawn, Garden). In Addition, The Height‑Adjusting Feature Allows You To Adapt To Any Size Project, Enabling You To Work At Different Levels. Worktable Size: 31” × 25”..
[Easy To Carry] Collapsible Design, Folds Flat For Easy Carry And Storage(Car, Garage, Storage Room) Wherever You Want. Thanks To Its Hassle‑Free Breakdown And Folding Mechanism, Moving From Job To Job Or From The Basement To The Garage Is No Problem..
[Set Includes] 1-Pack Worktable; 12″ (2-Pack) And 6″ (2-Pack) Medium‑Duty E‑Z Hold Bar Clamps; 2-Pack Large Bench Dogs; 2-Pack Small Bench Dogs; 2-Pack Safety Straps. The Bar Clamps Can Fasten Directly To The Worktable/Sawhorse, As Well As Hold Items Vertically Or Horizontally For Greater Flexibility While You Work..
[500 Lbs Load Capacity] Pony’S 2‑In‑1 Clamping Worktable And Sawhorse Features Quick Clamps And Holding Pegs That Can Support Up To 500 Lbs As A Table And Up To 1,000 Lbs As A Sawhorse. Aluminum-Made Leg Frame Makes It Stronger Than Other Workbenches..
Features
- [2-in-1 Worktable] Portable work table is easy to switch between the sawhorse and the workbench, which can adapt to a variety of work scenarios, making your work more convenient.
- [500 LBS Load Capacity] Pony s 2 in 1 clamping worktable and sawhorse features quick clamps and holding pegs that can support up to 500 lbs as a table and up to 1,000 lbs as a sawhorse. Aluminum-made leg frame makes it stronger than other workbenches.
- [Height Adjustable] Folding workbench can be adjusted at six different heights - from 30 to 35 to adapt to various work scenarios(Garage, lawn, garden). In addition, the height adjusting feature allows you to adapt to any size project, enabling you to work at different levels. Worktable size: 31 25 .
- [Set Includes] 1-pack worktable; 12 (2-pack) and 6 (2-pack) medium duty E Z HOLD bar clamps; 2-pack large bench dogs; 2-pack small bench dogs; 2-pack safety straps. The bar clamps can fasten directly to the worktable/sawhorse, as well as hold items vertically or horizontally for greater flexibility while you work.
- [Easy To Carry] Collapsible design, folds flat for easy carry and storage(Car, garage, storage room) wherever you want. Thanks to its hassle free breakdown and folding mechanism, moving from job to job or from the basement to the garage is no problem.
- See more on Amazon...
Brand: PONY | Manufacturer: HANGZHOU GREATSTAR INDUSTRIAL CO.,LTD.
Dimensions: 32.00 x 31.00 x 25.00 inches | Weight: 31.97 pounds
See On Amazon #3
SHONAN 3 Inch Stainless Steel Chain Quick Links- 4 Pack 5/16 Large Locking Carabiners Heavy Duty Chain Connector, 1535 Lbs Capacity
Asin: B08663KZH6 | Model: SNQL-05 | PartNumber: SNQL-05 | Ean: 0787794363961 | UPC: 787794363961
Easy To Use: These Shonan Stainless Steel Chain Quick Links(Snql-05) Are Perfect For Fast Connections With Chains. Design Of Threaded End And Hex Nut Provide A Tight And Secure Connection. The Diameter Of Chain That Work With This Quick Link Should Be Within 0.35 Inches..
Satisfaction Guarantee: This Package Comes With Four Pieces Of Stainless Steel Quick Link Chain Connectors Along With A One Year Satisfaction Guarantee. Please Contact Us With Any Questions Or Issues That You May Have. We Will Be More Than Happy To Assist You..
Specification: Each Shonan Stainless Steel Heavy Duty Locking Carabiner(Snql-05) Weighs 2.6 Oz(74 Grams), It Has Excellent Strength And Toughness Due To Its High Quality Raw Material, And Its Working Capacity Can Range Up To 1535 Lbs(690 Kg)..
Multi-Applications: These Shonan Quick Links(Snql-05) Are Designed To Create Permanent Or Temporary Secure Connections. They Are Ideal For Chain Fittings, Chains, Ropes, And Webbing. Widely Used For Outdoor Activities Such As Climbing, Hiking, Camping, Fishing, Boating, Etc..
Features
- MATERIAL: These 3 inch(overall length) chain quick links(SNQL-05) are made of high-quality raw material 304 stainless steel, which has excellent resistance to atmospheric corrosion.
- MULTI-APPLICATIONS: These SHONAN Quick Links(SNQL-05) are designed to create permanent or temporary secure connections. They are ideal for chain fittings, chains, ropes, and webbing. Widely used for outdoor activities such as climbing, hiking, camping, fishing, boating, etc.
- EASY TO USE: These SHONAN stainless steel chain quick links(SNQL-05) are perfect for fast connections with chains. Design of threaded end and hex nut provide a tight and secure connection. The diameter of chain that work with this quick link should be within 0.35 inches.
- SPECIFICATION: Each SHONAN stainless steel heavy duty locking carabiner(SNQL-05) weighs 2.6 oz(74 grams), it has excellent strength and toughness due to its high quality raw material, and its working capacity can range up to 1535 lbs(690 kg).
- SATISFACTION GUARANTEE: This package comes with FOUR pieces of stainless steel quick link chain connectors along with a one year satisfaction guarantee. Please contact us with any questions or issues that you may have. We will be more than happy to assist you.
- See more on Amazon...
Brand: Shonan.Systems | Manufacturer: Shonan Ltd.
Dimensions: 0.30 x 3.00 x 1.35 inches | Weight: 0.17 pounds
Warranty: 1 year warranty
See On Amazon #4
ZKTOOL1063 Lift Support Clamp with Brass Core Protection, Hood Strut Clamp and Spark Plug Caliper 2-in-1 Tool, 12mm Spark Plug Gap tool, Hood Lift Support Clip, Car Hood Clamp for Lift Support.
Asin: B091M1YH7Z | Model: ZK204 | PartNumber: ZK204 | Ean: 0734541849469 | UPC: 734541849469
Universal Lift Support Clamp: The Clamp Has A Curved Structure That Provides A Larger Force Area For Better Fixation Of Universal Lift Support Clamps Found On Hoods, Tailgates, Hatchbacks, And Trunks. It Also Comes With A Retaining Clip And Stay Holder For Added Convenience. Lifting Rod Next To The Cylinder Block And Tighten It With The Knob Until It Is Fixed On The Lifting Rod..
Compact Structure, Light Weight, Made Of Carbon Steel, The Knob Is Easier To Control, Effectively Reducing Errors And Electrode Damage, More Precise And Faster Adjustment Of The Gap, The Brass Core Can Prevent Scratches Caused By The Clamp Being Tightened In Place, Damage And Slippage..
Easy To Use: The Clamp Firmly Maintains The Lifting Support Clamp In A Straight State. Place The Tool On The Lifting Rod Next To The Cylinder Block And Tighten It With The Knob Until It Is Fixed On The Lifting Rod. The Spark Plug Adjustment Function Is Also Easy To Use, Simply Screw The Spark Plug Into The Tool, Use The Spark Plug Gap Gauge To Measure The Gap Size, And Then Adjust The Gap By Turning The Knob..
Brass Core Protection: The Lift Support Clamp Is Designed With A Brass Core To Protect Your Hood From Scratches And Damage Caused By The Clamp Being Tightened In Place, Ensuring A Safe And Secure Fit Every Time..
Features
- Multi-functional 2-in-1 Tool: The ZKTOOL Lift Support Clamp with Brass Core Protection combines a hood strut clamp and a spark plug caliper tool, which can save you money by achieving two functions with one tool. It is compatible with 12mm threaded spark plugs
- Brass Core Protection: The lift support clamp is designed with a brass core to protect your hood from scratches and damage caused by the clamp being tightened in place, ensuring a safe and secure fit every time.
- Universal Lift Support Clamp: The clamp has a curved structure that provides a larger force area for better fixation of universal lift support clamps found on hoods, tailgates, hatchbacks, and trunks. It also comes with a retaining clip and stay holder for added convenience. lifting rod next to the cylinder block and tighten it with the knob until it is fixed on the lifting rod.
- Easy to Use: The clamp firmly maintains the lifting support clamp in a straight state. Place the tool on the lifting rod next to the cylinder block and tighten it with the knob until it is fixed on the lifting rod. The spark plug adjustment function is also easy to use, simply screw the spark plug into the tool, use the spark plug gap gauge to measure the gap size, and then adjust the gap by turning the knob.
- Compact structure, light weight, made of carbon steel, the knob is easier to control, effectively reducing errors and electrode damage, more precise and faster adjustment of the gap, the brass core can prevent scratches caused by the clamp being tightened in place, Damage and slippage.
- See more on Amazon...
Brand: ZKTOOL | Manufacturer: ZKTOOL
Dimensions: 1.00 x 3.30 x 2.80 inches | Weight: 0.22 Pounds
See On Amazon #5
YOGEIER Car Exhaust Rubber Hanger, 2 Holes 11mm (0.43inch), Universal Exhaust Insulator Muffler Hanger, Muffler Bracket Bushing Mount (2pcs)
Asin: B0BBLL6HSR | Model: YOGEIER-ERH | PartNumber: YOGEIER-ERH
Dimensions: Width: 73Mm (2.9"); Height: 47Mm (1.9"); Depth: 20Mm (0.8") Bore: 11Mm (0.43"). It Is A Universal Vehicle Tool For Exhaust Systems Of Cars, Trucks, Jeeps And Suvs. Be Sure To Measure The Size Before Purchasing, So As Not To Be Inappropriate For Use..
What You Will Get: 4× Rubber Exhaust Hanger, This Rubber Exhaust Hanger Is Essential, And It Can Effectively Reduce The Sound Produced By Shaking And Hitting The Car Body. It Can Safely Fix The Exhaust Pipe Above The Ground, No Matter How Bumpy The Car Is On The Road, There Will Be No Abnormal Noise..
Installation: First Remove The Muffler Hanger From The Exhaust System Using The Exhaust Hanger Removal Tool. Then Hang The New Exhaust Hanger On The Mounting Pegs Attached To The Chassis. Finally, Hang The Other End Of The Exhaust Hanger On The Mounting Nail On The Exhaust Pipe..
Function: The High-Density Rubber Muffler Hanger Effectively Reduces The Sound Produced By The Shaking And Collision Of The Exhaust Pipe. Reduce The Height And Contact Surface Between The Exhaust Pipe And The Body To Prevent The Exhaust Pipe From Scratching Along The Ground..
Features
- Universal Accessories: This rubber exhaust hanger fits most cars that use an easy-to-replace hanger system, consisting of two holes and a rubber-lined insulator bracket. Be sure to check the size and distance between the hooks before use to ensure the product is suitable for use.
- Function: The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe. Reduce the height and contact surface between the exhaust pipe and the body to prevent the exhaust pipe from scratching along the ground.
- Dimensions: Width: 73mm (2.9); Height: 47mm (1.9); Depth: 20mm (0.8) Bore: 11mm (0.43). It is a universal vehicle tool for exhaust systems of cars, trucks, jeeps and SUVs. Be sure to measure the size before purchasing, so as not to be inappropriate for use.
- Installation: First remove the muffler hanger from the exhaust system using the exhaust hanger removal tool. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the mounting nail on the exhaust pipe.
- What You Will Get: 4 rubber exhaust hanger, this rubber exhaust hanger is essential, and it can effectively reduce the sound produced by shaking and hitting the car body. It can safely fix the exhaust pipe above the ground, no matter how bumpy the car is on the road, there will be no abnormal noise.
- See more on Amazon...
Brand: YOGEIER | Manufacturer: YOGEIER
Warranty: No
See On Amazon #6
Lisle 44870 Gold Lift Support Clamp
Asin: B0002SRCYM | Model: 44870 | PartNumber: 44870 | Ean: 0083045448709, 3372676074065, 5448095587641 | UPC: 083045448709
The Aluminum Body And Brass Threads Prevent Damage To The Lift Support.
The Aluminum Body And Brass Threads Prevent Damage To The Lift Support.
Clamp Securely Holds Weak Lift Supports In The Extended Position To Allow Access To The Engine Compartment Or Luggage Area.
Features
- Tool holds gas charged lift supports found on hoods, tailgates, hatchbacks and trunks
- Clamp securely holds weak lift supports in the extended position to allow access to the engine compartment or luggage area
- The aluminum body and brass threads prevent damage to the lift support
- The aluminum body and brass threads prevent damage to the lift support
- See more on Amazon...
Brand: Lisle | Manufacturer: Lisle
Dimensions: 7.48 x 29.92 x 22.44 inches | Weight: 0.11 pounds
Warranty: Lifetime Warranty - does not cover abuse or misuse
See On Amazon #7
27 inch 45 lbs Gas Struts Spring Shocks Replacement Lift Supports for Undercover Bedcover Tonneau Cover, ST270ED1-45 ST270P45EZ10 2Pcs Set
Asin: B08FDVPVQ6 | Model: ST270ED1-45 | PartNumber: ST270ED1-45
✅ Arana 27" 45Lb Gas Lift Supports Extended Length From Center Mount To Center Mount Is 27 Inch, 10Mm Nylon End, Please Measure Your Old Struts At First Before Purchasing;Note: If The Lid Weight Is Less Than 35Lbs Or More Than 50 Pounds, Please Choose Other Pressure Struts!!!.
✅ Other Applications: Arana 27" 45Lb Gas Shocks Could Also Be Used On Other Diy Applications; Please Confirm The Lid Weight Between 35 And 50 Pounds, If You Are Need Installation Guide, Click Ask Seller Besides Your Order From Us For In-Time Assistance!.
✅ Package Content: 2× Shocks, 4× Ball Studs, 1× Installation Guide Are Included In Each Set; If Any Missing, Please Message Us For New Package Directly;.
✅ Arana 27 Inch 45 Pound Gas Struts Could Be Used As The Replacement Parts Of The Tonneau Cover Undercover Bedcover For Pickup Truck, Easy To Install Without Any Special Tools Required;Note: Do Not Compress Them By Hands Before Installing, The Struts Could Only Be Compressed After Installing Successfully!!!.
Features
- ARANA 27" GAS SHOCKS are compatible with the following OEM Numbers: 190725,IH1214GS,ML2645,ML26-45,ML-26-45,RSIH1212GS,SL2645,SL26-45,SL-2645,SL-26-45,SL26451,SL26-45-1,SL-26451,SL-26-45-1,SL26455,SL26-45-5,SL-26455,SL-26-45-5,st270ed1-45,ST270EDi45,ST270EDi-45,ST270EDI45,ST270EDI-45,ST270P45EZ10,ST270PU45,ST270PU-45;
- ARANA 27 inch 45 Pound GAS STRUTS could be used as the replacement parts of the tonneau cover undercover bedcover for Pickup Truck, easy to install without any special tools required;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!
- ARANA 27 45lb GAS LIFT SUPPORTS extended Length from Center Mount to Center Mount is 27 inch, 10mm Nylon End, please measure your old struts at first before purchasing;NOTE: If the lid weight is less than 35lbs or more than 50 pounds, please choose other pressure struts!!!
- Package content: 2 Shocks, 4 Ball studs, 1 Installation Guide are included in each set; If any missing, please message us for new package directly;
- Other Applications: ARANA 27 45LB gas shocks could also be used on other DIY applications; please confirm the lid weight between 35 and 50 pounds, if you are need installation guide, click ASK SELLER besides your order from us for in-time assistance!
- See more on Amazon...
Brand: ARANA | Manufacturer: ARANA
Dimensions: 0.80 x 27.08 x 1.23 inches
See On Amazon #8
VASTOOLS Lift Support Clamp. For Hoods, Tailgates and Trunks with up to Dia.14mm shaft. Thick Metal Clamp, Set of 2, VASTOOLS
Asin: B08NPRBKL2 | Model: VSULSC | PartNumber: VSULSC | Ean: 0655160857270 | UPC: 655160857270
Brass Threads Prevent Damage To The Lift Support, And Don't Mar The Cylinder..
Great Tool For Keeping Hoods Up That Have Faulty Hood Struts. Easy To Put On And Take Off..
Capacity: Max. 14Mm..
It Will Work On Any Standard Hood Or Hatch Strut, Especially In Cold Weather..
Features
- This lift support clamp fits the larger shocks, to prevent the lift slip.
- It will work on any standard hood or hatch strut, especially in cold weather.
- Brass threads prevent damage to the lift support, and don't mar the cylinder.
- Capacity: max. 14mm.
- Great tool for keeping hoods up that have faulty hood struts. Easy to put on and take off.
- See more on Amazon...
Brand: VASTOOLS | Manufacturer: BYHH
Dimensions: 2.76 x 2.36 x 0.79 inches | Weight: 0.38 pounds
See On Amazon #9
WINTOWIN 2 Pack Adjustable 2-Way Lift Or Lower Spring Spacers,Coil Spring Compressor Coil Spring Struts Tool for Car Truck
Asin: B0BC9KTDSQ | Model: s003 | PartNumber: s003
By Turning A Nut To Expand Or Compress The Coil Spring, Dual Saddles Hold Coil Spring In Proper Alignment, Providing Extra Clearance When Adding Larger Tires..
You Will Need 8Pcs If You Are Lowering Or Lifting All 4 Coil Springs.
The Coil Spring Compressor Could Control The Rear End Compresses Coils To The Maximum Extent, And Adjust Coil Spring For Car..Use As A Tool To Put Spacers In Springs On Truck Or Car..
The Coil Spring Struts Are Adjustable, And The Spring Washers Support Both Spread And Compress. Lift Or Lower 1" Up To 2" .All You Need Is A Wrench,Easy And Fast To Operate,The Installation Is Firmly Fixed And Will Not Move..
Features
- 2-Way Adjustable Spring Spacer is made of carbon steel material with hard structure, not easy to deform and bend, high durability, safe and stable.
- The coil spring struts are adjustable, and the spring washers support both spread and compress. Lift Or Lower 1 Up To 2 .all you need is a wrench,easy and fast to operate,The installation is firmly fixed and will not move.
- By turning a nut to expand or compress the coil spring, dual saddles hold coil spring in proper alignment, providing extra clearance when adding larger tires.
- The coil spring compressor could control the rear end compresses coils to the maximum extent, and adjust coil spring for car..use as a tool to put spacers in springs on truck or car.
- You will need 8pcs if you are Lowering or Lifting all 4 Coil Springs
- See more on Amazon...
Brand: WINTOWIN | Manufacturer: NACHEE
Warranty: 1 year
See On Amazon #10
Car Trunk Lid Metal Spring, 2pcs Adjustable Auto Car Trunk Boot Lid, Automatic Lifting Spring Device, Stainless Steel Universal Lifter Accessory Open Tool for Remote-Controlled Auto Lid
Asin: B0BPLTGYMD | Model: Car Trunk Lid Metal Spring | PartNumber: Car Trunk Lid Metal Spring
【Easy To Install And Operate】: Car Trunk Cover Springs Are Easy To Install. You Just Need To Adjust The Screws On The Springs According To The Size Of The Trunk. To Facilitate The Installation Of The Fixed Spring And Adjust The Strength To Achieve The Best Switching State. Car Boot Cover Springs Can Be Easily Installed By Both Novice And Veteran..
【Notes】: The Car Trunk Lid Spring Is Only Suitable For Sedan With No Hydraulic Lever In The Trunk Lid. It Is Not Suitable For Vehicles With Hydraulic Lever In The Trunk Lid. We Provide Better Customer Service. If You Have Any Questions, Please Feel Free To Contact Us, We Will Solve It For You As Soon As Possible..
【Convenient And Practical】: The Trunk Opens Automatically With The Flick Of A Button, And It's Easy To Open When You're Holding A Shopping Bag Or School Bag. If Your Car Trunk Has Remote Control Function But Does Not Fully Open, Then You Can Install This Spring And Your Car Trunk Will Automatically Fully Open..
【Full Screw&Anti-Breaking】: Unique Car Trunk Cover Spring Design, Full Screw Adjustment, Anti-Break Conical Limit, Reinforced Spring Ring, The Force Can Be Adjusted. Adjust The Size Of The Force Through The Screw Length To Make The Opening Just Right. You Can Adjust The Length By Yourself. Trunk Opening Size Depends On Spring Length..
Features
- High Quality Stainless Steel : Car trunk lid springs are made of high-quality high-carbon alloy steel metal, which is strong and durable, and corrosion-resistant. The trunk spring tool has a long service life and is not easy to deform. Compared with ordinary trunk springs, it is more reliable and is not easy to be pulled off after improvement.
- Full Screw&Anti-breaking : Unique car trunk cover spring design, full screw adjustment, anti-break conical limit, reinforced spring ring, the force can be adjusted. Adjust the size of the force through the screw length to make the opening just right. You can adjust the length by yourself. Trunk opening size depends on spring length.
- Easy to Install and Operate : Car trunk cover springs are easy to install. You just need to adjust the screws on the springs according to the size of the trunk. To facilitate the installation of the fixed spring and adjust the strength to achieve the best switching state. Car boot cover springs can be easily installed by both novice and veteran.
- Convenient and Practical : The trunk opens automatically with the flick of a button, and it's easy to open when you're holding a shopping bag or school bag. If your car trunk has remote control function but does not fully open, then you can install this spring and your car trunk will automatically fully open.
- Notes : The car trunk lid spring is only suitable for sedan with no hydraulic lever in the trunk lid. It is not suitable for vehicles with hydraulic lever in the trunk lid. We provide better customer service. If you have any questions, please feel free to contact us, we will solve it for you as soon as possible.
- See more on Amazon...
Brand: AICEL | Manufacturer: AICEL
Dimensions: 1.00 x 0.50 x 0.50 Inches
Warranty: 0.2
See On Amazon #11
Vepagoo Lift Support Clamp for Hood Strut, Shock Prop Strut Stopper Retainer Tool for Car Hood, Hood Stay Holder Work for Tailgate Hatch and Liftgate, 2 Pack
Asin: B0B53JQHRD
🌞🌞Hood Stay Holder Tool Using High-Quality Alloy Material Can Prevent Scratches Caused By Clamps Being Tightened Into Place And Reduce The Traces Of Clamp Support..
🌞🌞12+1 Replacement Warranty. Welcome To Contact Us For Most Satisfied Solutions Via Amazon Mailbox If Any Problems Or Defects Occur..
🌞🌞Compact And Simple Design, Easy To Install And Remove. Simply Place The Prop Clamp On The Rod And Lock The Travel Rod By Twisting The Bolt..
🌞🌞May Be Dangerous When The Hood Struts Fail. Lift Support Clamp Is The Best Tool And Helper For Hood Lift. Strut Stopper Retainer Tool Could Hold Securely The Weak Lift Support In The Extension Position Allowing You To Safely Access The Hood Area For Work..
Features
- Lift support clamp fit up to 0.39" /10mm rod. It is widely used on the car hood, trunk, tailgate, liftgate, and any other equipment with gas shock springs.
- May be dangerous when the hood struts fail. Lift Support Clamp is the best tool and helper for hood lift. Strut Stopper Retainer Tool could hold securely the weak lift support in the extension position allowing you to safely access the hood area for work.
- Hood Stay Holder Tool using high-quality alloy material can prevent scratches caused by clamps being tightened into place and reduce the traces of clamp support.
- Compact and simple design, easy to install and remove. Simply place the prop clamp on the rod and lock the travel rod by twisting the bolt.
- 12+1 replacement warranty. Welcome to contact us for most satisfied solutions via amazon mailbox if any problems or defects occur.
- See more on Amazon...
Brand: Vepagoo | Manufacturer: Vepagoo
See On Amazon #12
L2900 Car Lift 9,000 LB 2 Post Lift Car Auto Truck Hoist w/ 12 Month Warranty 220V
Asin: B07MXRJ9X3 | Ean: 0723284412597, 0723284415444 | UPC: 723284415444, 723284412597
Ultra High Molecular Self Lubricating Nylon Slider Ensures Carriage Smooth Moving Up And Down.
Customer Must Have Forklift Or Fork Tractor To Unload The Freight. Package Weights Total 1400 Lbs. If Customer Does Not Have Either Tool To Unload, We Can Provide Terminal Pickup Service.
Equipment Required For Unloading: Forklift Or Tractor Is Required From Customer For Unloading The Product. Nearest Terminal Pickup Can Be Requested If Customer Does Not Have The Ability To Unload..
Door Guards Protection Rubber / Double Point Safety Lock Release.
Heavy Duty 5/16" Diameter Cable And 4.56" Pulley Reduce High Stress On Synchronization Process And Increase Cable Life.
Features
- Auto Car Lift L2900 - Features 220V 60HZ 1PH 3HP MOTER
- Heavy duty 5/16 diameter cable and 4.56 pulley reduce high stress on synchronization process and increase cable life
- Ultra high molecular self lubricating nylon slider ensures carriage smooth moving up and down
- Door guards protection rubber / Double Point Safety Lock Release
- Customer MUST have forklift or fork tractor to unload the freight. Package weights total 1400 LBS. If Customer does not have either tool to unload, we can provide Terminal Pickup Service
- Equipment Required for unloading: Forklift or Tractor is required from customer for unloading the product. Nearest Terminal Pickup can be requested if customer does not have the ability to unload.
- See more on Amazon...
Brand: XK | Manufacturer: XK
Dimensions: 106.30 x 106.30 x 129.92 inches | Weight: 1250.00 pounds
Warranty: A year parts warranty
See On Amazon #13
cerfioo 2 PCS Car Hood Repair Lifting Strut Replacement, Durable Metal Multi-purpose Vehicle Trunk Lift Support Device, Universal Snap On Rotatable Automotive Fixing Clamp Accessories (Red)
Asin: B0CVXHGKYC | Model: CERZCG1701RE-2PCS | PartNumber: CERZCG1701RE-2PCS
Rotating Type: The Car Hood Pillar Has A Smooth Handle, Which Can Be Expanded By Rotating To Adjust To The Height You Need. After Purchase, You Will Receive 2 X Car Hood Pillars, Which Are Enough For Daily Use. The Car Hood Pillars Are The Perfect Vehicle Maintenance Accessory..
Widely Used: The Car Hood Pillars Can Withstand Extreme Temperatures And Are Widely Adaptable. They Can Easily Secure Hoods, Tailgates, Hatch Covers, Spark Plugs, Etc. They Can Provide Repairers With The Space They Need To Perform Car Repair Work, Simple And Convenient..
Safety: The Car Hood Pillars Can Ensure That The Hood Does Not Become Loose, Which Will Ensure The Safety Of The Repairman. If You Need More Car Hood Pillars, Please Increase The Quantity When Purchasing. The Car Hood Pillars Can Also Be Used As Gifts For Friends Who Are Good At Repairing Vehicles..
Durability: The Car Hood Pillars Have Undergone Multiple Quality Tests To Ensure The Durability Of The Car Hood Pillars. The Car Hood Pillar Can Be Stored Directly In The Car Repair Tool Box. When The Vehicle Breaks Down, You Can Get It At Any Time Without Spending Extra Time And Money..
Features
- High-quality Materials: The car hood pillars are made of high quality materials. Metal bearings are capable of holding up to 100 pounds. The car hood pillars are wear-resistant, not easily deformed, small in size, easy to carry, and can improve maintenance efficiency.
- Durability: The car hood pillars have undergone multiple quality tests to ensure the durability of the car hood pillars. The car hood pillar can be stored directly in the car repair tool box. When the vehicle breaks down, you can get it at any time without spending extra time and money.
- Rotating Type: The car hood pillar has a smooth handle, which can be expanded by rotating to adjust to the height you need. After purchase, you will receive 2 x car hood pillars, which are enough for daily use. The car hood pillars are the perfect vehicle maintenance accessory.
- Safety: The car hood pillars can ensure that the hood does not become loose, which will ensure the safety of the repairman. If you need more car hood pillars, please increase the quantity when purchasing. The car hood pillars can also be used as gifts for friends who are good at repairing vehicles.
- Widely Used: The car hood pillars can withstand extreme temperatures and are widely adaptable. They can easily secure hoods, tailgates, hatch covers, spark plugs, etc. They can provide repairers with the space they need to perform car repair work, simple and convenient.
- See more on Amazon...
Brand: cerfioo | Manufacturer: cerfioo
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon #14
10 inch Gas Struts Spring Shocks 33 Lb/150 N 10" Easy-to-Install Lift Support Props for Tool Box Lid Boat Hatch Lid Truck Box Storage Box Lid, 2 Pcs Set ARANA
Asin: B0BWRC9GRY
✅10 Inch 150N/33Lb Gas Props -- You Can Use The Gas Spring On Your Tool Box Lid, Truck Box, Storage Box Lid, Boat Hatch Lid, Display Table And Other Light Diy Builds! Measurement First Required For Your Project Lid Before Purchasing!.
✅18 Months Support-- If Any Questions Or Dissatisfactions Before/After Purchasing Or Need Installing/Using Guide, Please Message Arana Directly To Let Us Provide In-Time Assistance To You!.
✅ Arana 10 Inch Lid Stay Hinges - A Pair Of Struts Per Set, Perfect Replacement Part As The Cabinet Lid Hinges, Soft-Close Gas Struts, Installation Instruction Will Come Along With The Package For Easy Installation;.
✅10 Inch 150N/33Lb Lift Supports -- 2Pcs Shocks Include. Most Suitable Support Weight For One Pair Is 25-36 Pounds!.
Features
- 33 Lbs Per Shock Lid Supports-Extended Length: 10 inch(254 mm), Compressed Length: 6.2 inch(157 mm), Package include: 2 struts. NOTE: If the lid weight is less than 25lbs or more than 36 pounds, please choose other pressure struts!!!
- 10 inch 150N/33LB Lift Supports -- 2Pcs shocks include. Most suitable SUPPORT weight for ONE pair is 25-36 Pounds!
- 10 inch 150N/33LB Gas Props -- You can use the gas spring on your tool box lid, truck box, storage box lid, boat hatch lid, display table and other light DIY builds! Measurement first required for your project lid before purchasing!
- ARANA 10 inch lid stay hinges - A pair of struts per set, perfect replacement part as the cabinet lid hinges, soft-close gas struts, installation instruction will come along with the package for easy installation;
- 18 Months Support-- If any questions or dissatisfactions before/after purchasing or need installing/using guide, please message ARANA directly to let us provide in-time assistance to you!
- See more on Amazon...
Brand: ARANA | Manufacturer: ARANA
Warranty: 18 Month Product Support Service
See On Amazon #15
2PCS Visor Clips for Cars, Car Sun Visor Retainer Support Hook Clip, Sunvisor Holder Hook for Civic Ridgeline CR-V, Car Interior Accessories Replace#74437, 88217S04003ZA, 88217-S04-003ZA (Gray)
Asin: B0CZP2CL6P | Model: MLAHUIER-Auto38 | PartNumber: MLAHUIER-Auto38
【Widely Used】Our Car Sun Visor Hook Clip Is Compatible With Civic, Ridgeline, Cr-V, And More,Replacement Part Numberare 88217S04003za And 88217S01a01za. Please Check Your Car Model And Part Number Before You Purchase.Prevent You From Having A Bad Shopping Experience..
【Package Include】You Will Receive 2 Car Sun Visor Hook Clips. Dimensions Are 1.42×1.38 Inches. You Can Share This Happiness With Your Good Friends And Family As A Practical Gift..
【Easy To Install】Simply Insert The Hook Clip Into The Corresponding Hole Above The Sun Visor Until The Plug Is Completely Inserted Into The Hole, Saving You Time And Money..
【Function】It Clamps And Supports Your Car Visor To Prevent It From Falling Off While You're Driving Down The Road. This Hook Clip Is A Great Replacement For Old Or Damaged Visor Clips To Better Suit Your Needs..
Features
- High Quality The car sun visor hook clip is made of high-quality nylon material. Nylon is wear-resistant and corrosion-resistant, has excellent toughness, is not easy to break after long-term use, and has good fit.
- Function It clamps and supports your car visor to prevent it from falling off while you're driving down the road. This hook clip is a great replacement for old or damaged visor clips to better suit your needs.
- Widely Used Our car sun visor hook clip is compatible with Civic, Ridgeline, CR-V, and more,Replacement part numberare 88217S04003ZA and 88217S01A01ZA. Please check your car model and part number before you purchase.Prevent you from having a bad shopping experience.
- Easy to Install Simply insert the hook clip into the corresponding hole above the sun visor until the plug is completely inserted into the hole, saving you time and money.
- Package Include You will receive 2 car sun visor hook clips. Dimensions are 1.42 1.38 inches. You can share this happiness with your good friends and family as a practical gift.
- See more on Amazon...
Brand: MLAHUIER | Manufacturer: MLAHUIER
Dimensions: 0.40 x 1.36 x 1.40 Inches
See On Amazon #16
Car Hood Prop Struts Clamp Hood Strut Clamp Lift Support Clamp 0.55 Inch Hood Lift Support Clip for Car Rod Retaining Holder Tool (4 Pcs)
Asin: B0BRPZHMKL | Model: SW-Riakrum-658988 | PartNumber: SW-Riakrum-658988
Easy To Install: The Hood Prop Rod Clamp Is Easy For You To Use, And You Simply Insert And Clip The Clamp And Adjust It Upon Actual Needs, Without Drilling Or Other Special Hand Tools.
Safe And Convenient: The Hood Strut Clamp Can Save More Efforts When You Have A Repair Work Or Check, And The Weight That Drops When It Fails Can Be Dangerous, The Lift Support Tool Will Prevent This From Happening Exactly.
Quality Material Selection: Made Of Quality Aluminum Alloy Material, Our Lift Support Clamp Is Sturdy And Solid, Reliable And Stable In Structure, Strong Enough Against Breakage, Wear, Fracture And Rust, Serving You For A Long Time Use.
Wide Applications: This Sort Of Hood Strut Clamp Is Suitable For Lift Rod Measuring About 0.55 Inch, Available For Most Car Engine Hoods, Tailgates, Or Hatch Struts; It Is Quite Useful Under Bad Weather Conditions When You Are In The Outside.
Features
- Designed for Lift Rod: our car lift support tools with clamp is well designed for car engine hood lift rod, the lifting support struts have locking nuts to reduce the possibility of loosening, and hood clamps for lift support prevent dropping or sagging
- Wide Applications: this sort of hood strut clamp is suitable for lift rod measuring about 0.55 inch, available for most car engine hoods, tailgates, or hatch struts; It is quite useful under bad weather conditions when you are in the outside
- Easy to Install: the hood prop rod clamp is easy for you to use, and you simply insert and clip the clamp and adjust it upon actual needs, without drilling or other special hand tools
- Quality Material Selection: made of quality aluminum alloy material, our lift support clamp is sturdy and solid, reliable and stable in structure, strong enough against breakage, wear, fracture and rust, serving you for a long time use
- Safe and Convenient: the hood strut clamp can save more efforts when you have a repair work or check, and the weight that drops when it fails can be dangerous, the lift support tool will prevent this from happening exactly
- See more on Amazon...
Brand: Riakrum | Manufacturer: Riakrum
See On Amazon #17
AUTORICH 7100 Lifting Bracket Set for Engine - 4 Heavy-Duty Engine Lift Bracket 5500 Lb Capacity, Engine Support Bar for Lifting Slings and Load Levelers, Red
Asin: B0CLLNHM5S
[Versatility Unleashed] The 7100 Lifting Bracket Set, With An Impressive 5,500 Lb. Lifting Capacity, Is The Quintessential Multi-Tool. Tailor-Made For Engine Hoisting, Whether It's Automotive, Tractor, Or Mack Engines. Additionally, These Brackets Excel At Lifting Transmissions And Handling A Wide Range Of Heavy Loads With Remarkable Dexterity.
[Satisfaction Guaranteed] We Take Immense Pride In Our Product And Back It With A Comprehensive Satisfaction Guarantee. You Can Have Complete Peace Of Mind Knowing That If Needed, A Hassle-Free Return Service Is Available Within A Month. For Any Questions, Concerns, Or Support, Our Dedicated Customer Service Team Is Always Readily Available To Assist You.
[Stylish Workshop] The Autorich 7100 Lifting Bracket Set Is The Epitome Of Strength And Style, And Now It Comes In Four Vibrant Colors – Black, Red, Orange, And Blue. These Lively Color Options Not Only Add A Dash Of Vibrancy But Also Elevate The Visual Appeal Of Your Workspace. No More Dull And Monotonous Tasks – Now You Can Work With A Touch Of Cheerfulness.
[Innovative Engineering] Our Engine Lifting Brackets Feature A Distinctive Angled Design, Enabling Direct Bolting To Engines, Transmissions, Radiators, And Other Substantial Components. These Brackets Seamlessly Integrate With Load Levelers And Lifting Slings, Simplifying Even The Most Demanding Lifting Tasks With Precision And Ease.
Features
- [Robust and Reliable] The AUTORICH 7100 Lifting Bracket Set consists of four heavy-duty brackets, meticulously crafted from high-strength steel. This unique manufacturing process involves galvanization and powder coating, making them exceptionally protected from rust. Each bracket boasts a remarkable 5,500 lbs lifting capacity, and accommodates bolts with a maximum diameter of 1/2 inch
- [Innovative Engineering] Our engine lifting brackets feature a distinctive angled design, enabling direct bolting to engines, transmissions, radiators, and other substantial components. These brackets seamlessly integrate with load levelers and lifting slings, simplifying even the most demanding lifting tasks with precision and ease
- [Versatility Unleashed] The 7100 Lifting Bracket Set, with an impressive 5,500 lb. lifting capacity, is the quintessential multi-tool. Tailor-made for engine hoisting, whether it's automotive, tractor, or Mack engines. Additionally, these brackets excel at lifting transmissions and handling a wide range of heavy loads with remarkable dexterity
- [Stylish Workshop] The AUTORICH 7100 Lifting Bracket Set is the epitome of strength and style, and now it comes in four vibrant colors black, red, orange, and blue. These lively color options not only add a dash of vibrancy but also elevate the visual appeal of your workspace. No more dull and monotonous tasks now you can work with a touch of cheerfulness
- [Satisfaction Guaranteed] We take immense pride in our product and back it with a comprehensive satisfaction guarantee. You can have complete peace of mind knowing that if needed, a hassle-free return service is available within a month. For any questions, concerns, or support, our dedicated customer service team is always readily available to assist you
- See more on Amazon...
Brand: AUTORICH | Manufacturer: AUTORICH
Dimensions: 1.60 x 4.50 x 2.00 inches
See On Amazon #18
10 inch 20 LB Gas Struts Prop Shocks 10" 89N Lift-Support for Boat Cooler Lid Boat Bolds Snap Box Rod Lockers RV Cabinet Door Toolbox Lid, 2pcs ARANA (10" Extended, Suitable Support Weight 16-22 LBS)
Asin: B0BTCYZRCL
✅ 10 Inch 20 Lb Gas Struts - Extended Length A(Center-To-Center): 10 Inch(254 Mm),Compressed Length B (Center-To-Center):7 Inch(178 Mm);.
✅ Arana Support-- 18 Months Replacement Support Will Be Provided Once Any Product Problems During Using Or Installing; If Any Missing Parts For Unfit Issue, Welcome To Let Arana Know For In-Time Solution!.
✅ Arana 10 Inch Lid Stay Hinges - A Pair Of Struts Per Set, Perfect Replacement Part As The Cabinet Lid Hinges, Soft-Close Gas Struts, Installation Instruction Will Come Along With The Package For Easy Installation;.
✅ 10 Inch 20Lb Gas Springs - This Arana 10 Inch Gas Spring Struts Could Be Used To Lift The Boat Cooler Lid, Skeeter Boat Bolds Snap Box, Rod Lockers, Rv Cabinet Door, Toolbox Lid Open And Close Softly, Make Sure Your Lid Is Between 16-22 Pounds;.
Features
- Interchange Number:12169, 4539BB, 500020, 8195583, 9522VD, C1615049, C16-15049, CS100020, CS1000-20, GP50020, GP50020P, GP52040P, GP6602P, GS500020, ML1020, ML10-20, ML-10-20, ML3020, ML30-20, ML-30-20, NI200020, NI2000-20, NI-200020, NI-2000-20, NI500020, NI5000-20;
- 10 inch 20lb gas springs - This ARANA 10 inch gas spring struts could be used to lift the boat cooler lid, skeeter boat bolds snap box, rod lockers, RV cabinet door, toolbox lid open and close softly, make sure your lid is between 16-22 pounds;
- 10 inch 20 lb gas struts - Extended Length A(Center-to-Center): 10 inch(254 mm),Compressed Length B (Center-to-Center):7 inch(178 mm);
- ARANA 10 inch lid stay hinges - A pair of struts per set, perfect replacement part as the cabinet lid hinges, soft-close gas struts, installation instruction will come along with the package for easy installation;
- ARANA Support-- 18 months replacement support will be provided once any product problems during using or installing; if any missing parts for unfit issue, welcome to let ARANA know for in-time solution!
- See more on Amazon...
Brand: ARANA | Manufacturer: ARANA
Warranty: 18 Month Product Support Service
See On Amazon #19
7100 Lifting Bracket Set, 2 Set, 5,500 lb, Engine Lift Bracket, Engine Support bar, for Lifting Slings and Load Levelers, Lifting Bracket Set. Capacity Lifting Bracket. Can Withstand 5500 pounds.
Asin: B098WMQQ2L | Model: R7100-2P | PartNumber: R7100-2P | Ean: 0788934316786 | UPC: 788934316786
💪Quality Metal Material - The Lifting Bracket Kit Is Made Of Quality Steel Material, Strong And Durable..
💪Perfect Kit Combination - The Lifting Bracket Set Is A Set Of Two Brackets, And The Maximum Acceptable Bolt Diameter Is 1/2 Inch..
💪Maximum Load Capacity - The Engine Stand Has A Load Capacity Of 5,500 Pounds, Long Life, And Is Hard..
💪Ingenious Design And Use - The Engine Support Bar Can Be Directly Bolted To The Lifted Part. This Component Should Be Used With Load Levelers And Lifting Slings To Assist In Lifting Most Engines And Heavy Parts. It Can Also Be Used For Other Purposes..
Features
- ENGINE LIFT BRACKET - 7100 Lifting Bracket Set Engine Lifting Bracket Can Be Used to Lift Engines or Other Heavy Parts, and Help Transform Heavy Equipment and Engines, They Are Ideal Tools for Workshops and Garages.
- INGENIOUS DESIGN AND USE - The Engine Support Bar Can Be Directly Bolted to the Lifted Part. This Component Should Be Used with Load Levelers and Lifting Slings to Assist in Lifting Most Engines and Heavy Parts. It Can Also Be Used for Other Purposes.
- QUALITY METAL MATERIAL - The Lifting Bracket Kit is Made of Quality Steel Material, Strong and Durable.
- MAXIMUM LOAD CAPACITY - The Engine Stand Has a Load Capacity of 5,500 Pounds, Long Life, and is Hard.
- PERFECT KIT COMBINATION - The Lifting Bracket Set is a Set of Two Brackets, and the Maximum Acceptable Bolt Diameter is 1/2 Inch.
- See more on Amazon...
Brand: Rendasun | Manufacturer: Rendasun
Dimensions: 0.45 x 4.30 x 1.50 inches | Weight: 0.90 pounds
See On Amazon #20
ARANA Backseat Car Storage Organizer for Kids, 2-in-1 Kick Mats Back of Seat Protector Cover for Vehicles SUV Truck with Touch Screen Holder & 10 Pockets, 2 Pack-Black
Asin: B0CCRXBHLD | Model: ARA-002CWD2 | PartNumber: ARA-002CWD2
💓𝐄𝐱𝐭𝐫𝐞𝐦𝐞𝐥𝐲 𝐑𝐞𝐥𝐢𝐚𝐛𝐥𝐞 & 𝐃𝐮𝐫𝐚𝐛𝐥𝐞💓 To Alleviate Concerns Of New Parents, Arana Back Seat Organizer For Kids Use Eco-Friendly Oxford And Safe Tpu Material To Reject Odour, And High Standards Of Sewing Technology With Strict Quality Control To Ensure The Durability..
🫂𝐄𝐚𝐬𝐲 𝐭𝐨 𝐈𝐧𝐬𝐭𝐚𝐥𝐥 & 𝐒𝐧𝐮𝐠 𝐅𝐢𝐭🫂 Arana Seat Organizer For Backseat Kids With Adjustable Straps Is Perfect For All Types Of Vehicles - Simply Adjusting The Straps For A Perfect Fit Between The Seat Protector And Your Seat, And Anti-Slip Feature Keeps The Car Backseat Organizer In Place While The Car Is In Motion..
📺𝐓𝐨𝐮𝐜𝐡𝐚𝐛𝐥𝐞 𝐒𝐜𝐫𝐞𝐞𝐧 𝐇𝐨𝐥𝐝𝐞𝐫📺 Arana Automotive Seat Back Organizer With A Clear And Touchable Tablet Holder Will Make You And Kids Enjoy A Pleasant Journey. You And Baby Can Enjoy Catching Up On Tv Shows Even In The Car;.
🤩𝐏𝐞𝐫𝐟𝐞𝐜𝐭 C𝐚𝐫 𝐁𝐚𝐜𝐤𝐬𝐞𝐚𝐭 𝐎𝐫𝐠𝐚𝐧𝐢𝐳𝐞𝐫𝐬🤩 Arana Backseat Car Organizer Comes With 10 Different-Sized Pockets To Store Various Items -Water Bottles, Pencils, Books, Toys, Etc., Helping You Stay Organized And Hassle-Free!.
Features
- & Troubled by wasting a lot of time to clean your leather seat back? ARANA 2 in 1 Car Seat Protector featuring black durable Oxford not only could be used as car kick mat to protect your seat against kids kicking, but also perfect toy organizers to help you store small items and toys;
- C ARANA backseat car organizer comes with 10 different-sized pockets to store various items -water bottles, pencils, books, toys, etc., helping you stay organized and hassle-free!
- & To alleviate concerns of new parents, ARANA back seat organizer for kids use eco-friendly Oxford and safe TPU material to reject odour, and high standards of sewing technology with strict quality control to ensure the durability.
- ARANA automotive seat back organizer with a clear and touchable tablet holder will make you and kids enjoy a pleasant journey. You and baby can enjoy catching up on TV shows even in the car;
- & ARANA seat organizer for backseat kids with adjustable straps is perfect for all types of vehicles - simply adjusting the straps for a perfect fit between the seat protector and your seat, and Anti-slip feature keeps the car backseat organizer in place while the car is in motion.
- See more on Amazon...
Brand: ARANA | Manufacturer: ARANA
Dimensions: 7.87 x 1.00 x 11.80 inches
See On Amazon
Looking For Something Else?
Search