FUNGDO 3D Printer Enclosure Fume Extractor Smoker Absorber Ventilation Kit Eliminate 3D Printing Resin Smell 3D Printer Filament Odor Keep Room Air Fresh 3D Printer Warmer (Small Plus)
Asin: B0CJ34J4X2 | Model: Fun-clo0524 | PartNumber: Fun-clo0524 | Ean: 0724164996657 | UPC: 724164996657
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.Multifunctional Usage. Excellent Warming Affect With Exhaust Fan Make The Enclosure To Have Unexpected Dryer Function, When Test Ender 3 To Print Abs Filament, The Inner Humidity Is 65%, 20 Minutes Later, Interior Humidity Drop To 34%(With Exhaust Fan On), For Long Time,Humidity Would Low To 26%. This Enclosure Also Could Be A Dust Cover , Waterproof Tent, Uv Light Shelter And Can Reduce Working Noise..
5:【Wide Compatibility】21"（W）*25"（D）*29.5"（H) ,Fit For Resin Printer Anycubic Photon Mono 2/Mono S5s/Mono S5s Pro/Mono X 6Ks/M3 Max/Elegoo Saturn 3/Saturn 3 Ultra/Jupiter Se/Mars 3/Mars 4 Creality Holat-Mage/Holat-Mage Pro/Gktwo 10.3/Phrozen Sonic Mighty ,Creality Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/Cr-6 Se/Cr 20/Cr 20 Pro Anycubic Kobra/ Mega Pro/Elegoo Naptune /Sovol Sv 06 Etc,Plz Measure Printer Size Before Order.
4. Easy To Install & Convenient To Use . Assemble The Enclosure Just Like A Simple Tent; With Lighting Bar And Observation Window, Easy To Watch Printing Progress; The Window Made Of Dark Transparent Material,All Zippers Are Air Tighten ,So Allow Lcd Printer Working Without Acrylic Cover And Allow Resin Inside Without Been Cured For Long Time Storage; Both Side With Exhaust Fan Seat,Free To Arrange Extract Direction According To Need; The Valve For Anti Backflow Help Easy To Install Vent On Wall.
2.Enhanced Warming Affect,Contribute To Better Printing Quality And High Success Rate.When Print Ender-3 With Abs Filament (Nozzle 240℃,Bed 110℃, Room Temp.27℃),20-30 Min. Later, Interior Temp. Could Go To 41-42℃, With This Constant Temp., Print Object Not Easy Wrap On Bottom Or Crack Between Layers ; Print An Epax 10.1 Inch Mono Lcd Printer, At Room Temp.27℃, Enclosure Can Go Up To 33-35℃, Which Means Allow Resin Flow Faster, Especially In Cold Days,This Enclosure Will Help To Print Better.
Features
- 1. Effectively Stop 3d Printing Fume Or Odor Affect Your Nose And Health ! The enclosure with excellent airtight performance, can insulate the smell emit from 3d printer resin or melted filament in time, then extract the smelly air out quickly by ventilation system.No more nasty fumes in the working room!
- 2.Enhanced Warming Affect,Contribute To Better Printing Quality And High Success Rate.When Print ender-3 with ABS filament (nozzle 240 ,bed 110 , room temp.27 ),20-30 min. later, interior temp. could go to 41-42 , with this constant temp., print object not easy wrap on bottom or crack between layers ; print an epax 10.1 inch mono LCD printer, at room temp.27 , enclosure can go up to 33-35 , which means allow resin flow faster, especially in cold days,this enclosure will help to print better
- 3.Multifunctional Usage. Excellent warming affect with exhaust fan make the enclosure to have unexpected Dryer function, when test ender 3 to print ABS filament, the inner humidity is 65%, 20 minutes later, interior humidity drop to 34%(with exhaust fan on), for long time,humidity would low to 26%. This enclosure also could be a Dust Cover , Waterproof Tent, UV light shelter and can reduce working noise.
- 4. Easy to install & Convenient to Use . Assemble the enclosure just like a simple tent; with lighting bar and observation window, easy to watch printing progress; the window made of dark transparent material,all zippers are air tighten ,so allow LCD printer working without acrylic cover and allow resin inside without been cured for long time storage; both side with exhaust fan seat,free to arrange extract direction according to need; the valve for anti backflow help easy to install vent on wall
- 5: Wide Compatibility 21 W *25 D *29.5 H) ,fit for Resin Printer Anycubic photon Mono 2/Mono S5s/Mono S5s pro/Mono X 6Ks/M3 Max/Elegoo Saturn 3/Saturn 3 Ultra/Jupiter SE/Mars 3/Mars 4 Creality Holat-Mage/Holat-Mage Pro/GKtwo 10.3/Phrozen Sonic Mighty ,Creality Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro Anycubic Kobra/ Mega Pro/ELEGOO Naptune /Sovol SV 06 etc,PLZ measure printer size before order
- See more on Amazon...
Brand: FUNGDO | Manufacturer: FUNDO Smart Tech
Dimensions: 29.50 x 25.20 x 21.30 Inches
See On Amazon Similar To FUNGDO 3D Printer Enclosure Fume
#1
3D Printer Enclosure with LED Lighting, Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3/Ender 3 Pro/Ender 3V2/Ender 3S1/Neo/Anycubic Elegoo, Medium
Asin: B0CDXCTQP1 | Model: Enclosure-M | PartNumber: Enclosure-M | Ean: 0792105752396 | UPC: 792105752396
【Dustproof And Fireproof, Safe To Use】Protect Your 3D Printer And Reduce The Risk Of Accidents With Fire-Resistant Materials And A Sturdy Structure. Avoid Dust Particles From Entering And Negatively Impacting Print Quality, Ensuring Stable And Perfect Results Every Time. Effectively Prevent Accidental Touches From Children Or Pets..
【Isolate Noise And Enjoy Creation Quietly】 An Enclosed 3D Printer Cover With All Six Sides Effectively Blocks The Transmission Of Printing Noise, Effectively Reduce Noise And Enjoy The Silent Printing Process，.
【Wide Compatibility】Support Printer Size (Include Spool Holder Height) Is Smaller Than 28.7×25.6×21.6". Please Measure Your Printer Height Before Ordering. Compatible With Creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6Se/Ender 5/ 5Pro/5S1, Anycubic Kobra/Anycubic Mega Pro/Elegoo Naptune 3D Printer..
【Fast Installation And Long-Term Use】5 Minutes Easy Installation, Quick Start And Easily Disassembled For Moving Or Replacing. Its Robust Construction Ensures Stability During Operation, Minimizing Vibrations That Could Compromise Print Precision, And Can Support Your Long-Term Use And Is Not A Disposable Product..
【Improve Print Quality With Constant Temperature】Provides A Stable And Controlled Environment For Your Prints, Maintaining A Consistent Temperature During Printing Ensures That You Produce High-Quality Prints While Avoiding Print Failures And Material Wastage. Constant Temperature Reduces The Risk Of Material Clogs And Jams, Enhancing Your Printing Speed And Efficiency..
Features
- Enhanced Illumination For Your Printing Area Improve your workspace visibility with our innovative built-in LED light strip. It will illuminate your printing process, allowing you to monitor it more effectively. By quickly identifying potential issues such as filament jams, layer adhesion problems, or misalignments, you can address them promptly even in low-light conditions.
- Improve Print Quality with Constant Temperature Provides a stable and controlled environment for your prints, maintaining a consistent temperature during printing ensures that you produce high-quality prints while avoiding print failures and material wastage. Constant temperature reduces the risk of material clogs and jams, enhancing your printing speed and efficiency.
- Dustproof and Fireproof, Safe to Use Protect your 3D printer and reduce the risk of accidents with fire-resistant materials and a sturdy structure. Avoid dust particles from entering and negatively impacting print quality, ensuring stable and perfect results every time. Effectively prevent accidental touches from children or pets.
- Fast Installation and Long-term Use 5 minutes easy installation, quick start and easily disassembled for moving or replacing. Its robust construction ensures stability during operation, minimizing vibrations that could compromise print precision, and can support your long-term use and is not a disposable product.
- Isolate Noise and Enjoy Creation Quietly An enclosed 3D printer cover with all six sides effectively blocks the transmission of printing noise, effectively reduce noise and enjoy the silent printing process
- Wide Compatibility Support printer size (include spool holder height) is smaller than 28.7 25.6 21.6. Please measure your printer height before ordering. Compatible with Creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6SE/Ender 5/ 5Pro/5S1, Anycubic Kobra/Anycubic Mega Pro/ELEGOO Naptune 3D Printer.
- See more on Amazon...
First Available: 08/29/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 80.00 x 45.00 x 25.00 inches | Weight: 4.30 pounds
Warranty: 180-Warranty
See On Amazon #2
Creality 3D Printer Enclosure Fireproof and Dustproof 3D Printer Warm Enclosure Mini 3D Printer Tent for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5
Asin: B0CGTP25QJ | Model: Creality Ender Enclosure | PartNumber: Creality Ender Enclosure
🤗 Safe To Use & Stable Structure - The Interior Uses Pure Aluminum Film And Flame Retardant Appearance Material. Technically, If In A Fire, It Will Melt And Not Fire Itself Of The Enclosure And Will Not Spread As Well. What's More, This 3D Printer Enclosure Equipped With A Selection Of Iron Pipes, Stable Structure And Abundant Space..
🤗 Quick And Easy Installation - Folding Storage, Easy To Carry. Multi-Faceted Observation, Reserved Tool Pockets. Economical 3D Printing Room..
🤗 Stable Structure - Glass Fiber Rod Pipes Provides Stable Structure, Portability, And Abundant Space..
🤗 Constant Temperature - 3D Printer Keeps A Constant Temperature Printing Environment,Allowing For Much More Stable Temperatures Once The Printer Is Operating.This 3D Printer Enclosure Can Lead To Better Results With High Temperature Filaments And Helps With Bed Adhesion At High Temperatures As Well, Improve Printing Stability..
Features
- Wide Compatibility - Compatible for Creality Ender 3V2/Ender 3S1/Ender 3Pro/Ender 3 3D Printer.Importantly: The Creality and Ender Enclosure have passed Flame Resistance Test. Storage Size: 18.89*23.62*28.34(480*600*720mm).
- Constant Temperature - 3D printer keeps a constant temperature printing environment,allowing for much more stable temperatures once the printer is operating.This 3d printer enclosure can lead to better results with high temperature filaments and helps with bed adhesion at high temperatures as well, improve printing stability.
- Safe to Use & Stable Structure - The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well. What's more, this 3d printer enclosure equipped with a selection of iron pipes, stable structure and abundant space.
- Stable Structure - Glass fiber rod pipes provides stable structure, portability, and abundant space.
- Quick and Easy Installation - Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Dimensions: 3.74 x 15.35 x 7.87 inches | Weight: 3.63 Pounds
See On Amazon #3
Resin 3D Printer Enclosure with Ventilation, Multifunctional 3D Printer Vented Enclosure Tent Cover Eliminate Odors Dustproof Isolate Noise for Creality Anycubic Elegoo Series LCD SLA DLP 3D Printer
Asin: B0CKNZ7SM6 | Model: Psein Printer Enclosure | PartNumber: Psein Printer Enclosure
【Dustproof, Clean Printing】The Six Sided Fully Enclosed Structure Provides A Tidy And Safe Printing Environment, Shielding Your Resin 3D Printer From Dust And Resin Splashing. The Resin Printer Cover Provide A Clean And Safe Printing Environment.It Is Beneficial For Maintaining The Quality Of Resin Prints..
【Good Compatibility】Compatible With Anycubic Photon Mono / Elegoo Saturn/ Elegoo Mars / Creality Halot Series Lcd Sla Dlp 3D Printers. Yoopai Resin Printer Enclosure Size: 28×18×17In, If Your Resin 3D Printer Is Smaller Than This Size, It Can Also Be Compatible For Use..
【Improve Print Quality With Constant Temperature】Internal Heat Insulation Design Effectively Enhanced Warming Affect, Allowing You To Print At A Relatively Constant Temperature, Allowing For Better Resin Flow And Printing Stablely. Perfect For Anyone Looking To Enhance The Precision And Quality Of Their Resin Printing Projects..
【Perspective Window For Easy Observation】The Preferred Pvc Material With Light Weight, High Toughness And No Wrinkles, And A High-Transparency Large Window At The Front, Which Is Convenient For Observing The Printing Dynamics From Time To Time. Don't Need To Open The Protective Cover To Observe, So Prevent Polluted Air From Spreading In Your Room..
Features
- Powerful Filtering odors and Emissions Say hello to a clean and hassle-free resin printing experience with our Resin 3D Printer Enclosure! Built-in carbon filter sheet can effectively adsorbs and eliminates the odor of resin, ensuring a pleasant and odor-free working environment. The addition of exhaust fans and expandable pipes allows for the convenient discharge of polluting gases, maintaining clean and fresh air in your printing space.
- Perspective Window For Easy Observation The preferred PVC material with light weight, high toughness and no wrinkles, and a high-transparency large window at the front, which is convenient for observing the printing dynamics from time to time. Don't need to open the protective cover to observe, so prevent polluted air from spreading in your room.
- Dustproof, Clean Printing The six sided fully enclosed structure provides a tidy and safe printing environment, shielding your resin 3D printer from dust and resin splashing. The resin printer cover provide a clean and safe printing environment.It is beneficial for maintaining the quality of resin prints.
- Improve Print Quality with Constant Temperature Internal heat insulation design effectively enhanced warming affect, allowing you to print at a relatively constant temperature, allowing for better resin flow and printing stablely. Perfect for anyone looking to enhance the precision and quality of their resin printing projects.
- Good Compatibility Compatible with Anycubic Photon Mono / ELEGOO Saturn/ ELEGOO Mars / Creality Halot Series LCD SLA DLP 3D Printers. Yoopai Resin printer Enclosure Size: 28 18 17in, if your resin 3D printer is smaller than this size, it can also be compatible for use.
- See more on Amazon...
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 28.35 x 16.93 x 18.11 inches
See On Amazon #4
Creality Ender 3D Printer Enclosure Fireproof and Dustproof Tent Constant Temperature Protective Cover Room for Creality Ender 3V2/Ender 3V2 Neo/Ender 3S1/Ender 3Pro/Ender 3/Ender 3Neo 3D Printer
Asin: B0995VTBLS | Model: Ender-tent | PartNumber: Ender-tent
Safe To Use & Stable Structure: The Interior Uses Pure Aluminum Film And Flame Retardant Appearance Material. Technically, If In A Fire, It Will Melt And Not Fire Itself Of The Enclosure And Will Not Spread As Well. What's More, This 3D Printer Enclosure Equipped With A Selection Of Iron Pipes, Stable Structure And Abundant Space..
Quick And Easy Installation: Folding Storage, Easy To Carry. Multi-Faceted Observation, Reserved Tool Pockets. Economical 3D Printing Room..
Stable Structure: Glass Fiber Rod Pipes Provides Stable Structure, Portability, And Abundant Space..
Constant Temperature:3D Printer Keeps A Constant Temperature Printing Environment,Allowing For Much More Stable Temperatures Once The Printer Is Operating.This 3D Printer Enclosure Can Lead To Better Results With High Temperature Filaments And Helps With Bed Adhesion At High Temperatures As Well, Improve Printing Stability..
Features
- Storage Size:18.89*23.62*28.34(480*600*720mm). Compatible for Creality Ender 3V2/Ender 3S1/Ender 3Pro/Ender 3/Ender 3V2 Neo?Ender 3Neo/Ender 5/Ender 5S1/Anycubic Kobra/ELEGOO Naptune 3 3D Printer.Importantly: The Creality and Ender Enclosure have passed Flame Resistance Test.
- Constant Temperature:3D printer keeps a constant temperature printing environment,allowing for much more stable temperatures once the printer is operating.This 3d printer enclosure can lead to better results with high temperature filaments and helps with bed adhesion at high temperatures as well, improve printing stability.
- Safe to Use & Stable Structure: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well. What's more, this 3d printer enclosure equipped with a selection of iron pipes, stable structure and abundant space.
- Stable Structure: Glass fiber rod pipes provides stable structure, portability, and abundant space.
- Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room.
- See more on Amazon...
Brand: Skouphy | Manufacturer: Creality
Weight: 3.50 pounds
See On Amazon #5
Resin 3D Printer Enclosure with Ventilation, 3D Printer Vented Enclosure Tent Cover Eliminate Odors Dustproof Isolate Noise Compatible with Creality Anycubic Elegoo Series LCD Resin UV 3D Printer
Asin: B0CY8CYDG7 | Model: Vent Resin Enclosure | PartNumber: Vent Resin Enclosure | Ean: 0850055848801 | UPC: 850055848801
【Dustproof, Clean Printing】The Six Sided Fully Enclosed Structure Provides A Tidy And Safe Printing Environment, Shielding Your Resin 3D Printer From Dust And Resin Splashing. The Resin Printer Cover Provide A Clean And Safe Printing Environment.It Is Beneficial For Maintaining The Quality Of Resin Prints..
【Good Compatibility】Compatible With Photon Mono / Elegoo Saturn/ Elegoo Mars / Halot Series Lcd Sla Dlp 3D Printers. Yoopai Resin Printer Enclosure Size: 28×18×17In, If Your Resin 3D Printer Is Smaller Than This Size, It Can Also Be Compatible For Use..
【Improve Print Quality With Constant Temperature】Internal Heat Insulation Design Effectively Enhanced Warming Affect, Allowing You To Print At A Relatively Constant Temperature, Allowing For Better Resin Flow And Printing Stablely. Perfect For Anyone Looking To Enhance The Precision And Quality Of Their Resin Printing Projects..
【Perspective Window For Easy Observation】The Preferred Pvc Material With Light Weight, High Toughness And No Wrinkles, And A High-Transparency Large Window At The Front, Which Is Convenient For Observing The Printing Dynamics From Time To Time. Don't Need To Open The Protective Cover To Observe, So Prevent Polluted Air From Spreading In Your Room..
Features
- Powerful Filtering odors and Emissions Say hello to a clean and hassle-free resin printing experience with our Resin 3D Printer Enclosure! Built-in carbon filter sheet can effectively adsorbs and eliminates the odor of resin, ensuring a pleasant and odor-free working environment. The addition of exhaust fans and expandable pipes allows for the convenient discharge of polluting gases, maintaining clean and fresh air in your printing space.
- Perspective Window For Easy Observation The preferred PVC material with light weight, high toughness and no wrinkles, and a high-transparency large window at the front, which is convenient for observing the printing dynamics from time to time. Don't need to open the protective cover to observe, so prevent polluted air from spreading in your room.
- Dustproof, Clean Printing The six sided fully enclosed structure provides a tidy and safe printing environment, shielding your resin 3D printer from dust and resin splashing. The resin printer cover provide a clean and safe printing environment.It is beneficial for maintaining the quality of resin prints.
- Improve Print Quality with Constant Temperature Internal heat insulation design effectively enhanced warming affect, allowing you to print at a relatively constant temperature, allowing for better resin flow and printing stablely. Perfect for anyone looking to enhance the precision and quality of their resin printing projects.
- Good Compatibility Compatible with Photon Mono / ELEGOO Saturn/ ELEGOO Mars / Halot Series LCD SLA DLP 3D Printers. Yoopai Resin printer Enclosure Size: 28 18 17in, if your resin 3D printer is smaller than this size, it can also be compatible for use.
- See more on Amazon...
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 28.00 x 17.00 x 18.00 inches
See On Amazon #6
YOOPAI 3D Printer Enclosure, Fireproof Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3/Ender 3 Pro/Ender 3V2/Ender 3S1/Neo/Anycubic Elegoo, 29.5 25.6 21.6"
Asin: B0CR6CGJVC | Model: Enclosure-BV | PartNumber: Enclosure-BV | Ean: 0850055848603 | UPC: 850055848603
【Dustproof And Fireproof, Safe To Use】Protect Your 3D Printer And Reduce The Risk Of Accidents With Fire-Resistant Materials And A Sturdy Structure. Avoid Dust Particles From Entering And Negatively Impacting Print Quality, Ensuring Stable And Perfect Results Every Time. Effectively Prevent Accidental Touches From Children Or Pets..
【Wide Compatibility】Support Printer Size (Include Spool Holder Height) Is Smaller Than 29.5×25.6×21.6". Please Measure Your Printer Height Before Ordering. Compatible With Creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6Se/Ender 5/ 5Pro/5S1, Anycubic Kobra/Anycubic Mega Pro/Elegoo Naptune 3D Printer..
【Isolate Noise And Enjoy Creation Quietly】 An Enclosed 3D Printer Cover With All Six Sides Effectively Blocks The Transmission Of Printing Noise, Effectively Reduce Noise And Enjoy The Silent Printing Process..
【Fast Installation And Long-Term Use】5 Minutes Easy Installation, Quick Start And Easily Disassembled For Moving Or Replacing. Its Robust Construction Ensures Stability During Operation, Minimizing Vibrations That Could Compromise Print Precision, And Can Support Your Long-Term Use And Is Not A Disposable Product..
【Improve Print Quality With Constant Temperature】Provides A Stable And Controlled Environment For Your Prints, Maintaining A Consistent Temperature During Printing Ensures That You Produce High-Quality Prints While Avoiding Print Failures And Material Wastage. Constant Temperature Reduces The Risk Of Material Clogs And Jams, Enhancing Your Printing Speed And Efficiency..
Features
- Supports Fan Exhaust Kit DIY and External Filament Transfer An opening has been added to the right side of the cover, which can support the connection of a fan fume extraction kit,(YOOPAI store has a separate fan kit link for ordering). Additionally, a small hole on the left allows for external filament transfer, if your filaments need to be placed outside the cover, this fully meets your needs.
- Improve Print Quality with Constant Temperature Provides a stable and controlled environment for your prints, maintaining a consistent temperature during printing ensures that you produce high-quality prints while avoiding print failures and material wastage. Constant temperature reduces the risk of material clogs and jams, enhancing your printing speed and efficiency.
- Dustproof and Fireproof, Safe to Use Protect your 3D printer and reduce the risk of accidents with fire-resistant materials and a sturdy structure. Avoid dust particles from entering and negatively impacting print quality, ensuring stable and perfect results every time. Effectively prevent accidental touches from children or pets.
- Fast Installation and Long-term Use 5 minutes easy installation, quick start and easily disassembled for moving or replacing. Its robust construction ensures stability during operation, minimizing vibrations that could compromise print precision, and can support your long-term use and is not a disposable product.
- Wide Compatibility Support printer size (include spool holder height) is smaller than 29.5 25.6 21.6. Please measure your printer height before ordering. Compatible with Creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6SE/Ender 5/ 5Pro/5S1, Anycubic Kobra/Anycubic Mega Pro/ELEGOO Naptune 3D Printer.
- Isolate Noise and Enjoy Creation Quietly An enclosed 3D printer cover with all six sides effectively blocks the transmission of printing noise, effectively reduce noise and enjoy the silent printing process.
- See more on Amazon...
First Available: 02/18/2024
Brand: YOOPAI | Manufacturer: YOOPAI
See On Amazon #7
Comgrow 3D Printer Enclosure Fireproof and Dustproof Tent for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro, Constant Temperature Protective 3D Printer Cover Room Storage 635x535x750mm
Asin: B093H1J46W
Safe To Use: The Interior Uses Pure Aluminum Film And Flame Retardant Appearance Material. Technically, If In A Fire, It Will Melt And Not Fire Itself Of The Enclosure And Will Not Spread As Well..
Dustproof And Stop The Outside Wind. No Outside Winds/Dusts Can Affect The Print Anymore. Stable Structure: Equipped With A Selection Of Iron Pipes, Stable Structure And Abundant Space..
Quick And Easy Installation: Folding Storage, Easy To Carry. Multi-Faceted Observation, Reserved Tool Pockets. Economical 3D Printing Room..
Fit For Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/Cr-6 Se/Cr 20/Cr 20 Pro..
Features
- Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.
- Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro.
- Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.
- Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room.
- Dustproof and stop the outside wind. No outside winds/dusts can affect the print anymore. Stable Structure: Equipped with a selection of iron pipes, stable structure and abundant space.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 21.06 x 29.53 x 25.00 Inches
See On Amazon #8
Creality Official 3D Printer Enclosure Fireproof and Dustproof Tent Constant Temperature Protective Cover Storage 480*600*720mm for Ender 3/Ender 3V2/Ender 3S/S1/S1 Pro/Ender 3Pro/Ender 3 Neo/3 V2 Neo
Asin: B0C81CFV13
Creality 3D Printer Enclosure Ensure Absolute Safety! Creality 3D Printer Enclosure Is Made Of Flame-Retardant Aluminum Foil Cloth, Which Is High Temperature Resistant, Fire-Resistant, Flame-Retardant, And Corrosion-Resistant. Ender 3 Enclosure Can Still Print At A Constant Temperature In The Heat Preservation Cover Under Complex Conditions, Preventing Your Printer From Getting Dusty When It Is Not In Use For A Long Time, And Reducing Some Fan And Motor Noise..
We Are The Official Creality 3D Store! We Provide Professional After-Sales Support, And More Than 20 Engineers Provide 24/7 Customer Service With 3-Year Limited And Lifetime Technical Assistance, Please Kindly Contact Us Directly (Seller) Via "Ask A Question"..
Ideal Gift: This Is Undoubtedly The Latest Perfect Design For 2024. It Has A Grand Appearance And Classic Line Art Design, With Beautiful Dark Lines On The Surface. Whether It's Thanksgiving, Christmas, Memorial Day, Valentine's Day, Or Father's Day, It's An Ideal Gift For Parents, Family, Husbands, Friends, And Boyfriends..
3D Printer Cover Is Easy To Install, Detachable, Folded For Storage, And Easy To Use. Creality 3D Printer Enclosure Support Frame Uses Glass Fiber Rods, Which Are Light And Hard, High Mechanical Strength, Anti-Aging, High Temperature Resistance, Corrosion Resistance, And Durable! The Ender 3 Enclosure Structure Is Stable And The Space Is Abundant..
3D Printer Cover Size:28.35X23.62X18.9Inch (480*600*720Mm). Creality 3D Printer Enclosure Maintains A Constant Temperature Printing Environment, Reduces The Adverse Effects Of Low Temperature Weather On The Printed Model, And Improves Printing Stability. Effectively Alleviate Problems Such As Cracking, Warping, And Shrinkage. No More Worries About Print Quality Being Negatively Affected By The External Environment..
Features
- Creality 3d printer enclosure 100% official and original packaging of the products! compitable with 99% FDM 3d printers such as Ender 3 V3 KE enclosure, Ender 3 V3 SE enclosure, Ender 3, Ender3 V2, Ender 3S, Ender 3S1, Ender 3 S1 Pro, Ender 3 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender 2, Ender 2 Pro, CP 01, and other 3D printers
- 3d printer cover Size:28.35x23.62x18.9inch (480*600*720mm). Creality 3d printer enclosure maintains a constant temperature printing environment, reduces the adverse effects of low temperature weather on the printed model, and improves printing stability. Effectively alleviate problems such as cracking, warping, and shrinkage. No more worries about print quality being negatively affected by the external environment.
- Creality 3d printer enclosure ensure absolute safety! Creality 3d printer enclosure is made of flame-retardant aluminum foil cloth, which is high temperature resistant, fire-resistant, flame-retardant, and corrosion-resistant. Ender 3 enclosure can still print at a constant temperature in the heat preservation cover under complex conditions, preventing your printer from getting dusty when it is not in use for a long time, and reducing some fan and motor noise.
- 3d printer cover is easy to install, detachable, folded for storage, and easy to use. Creality 3d printer enclosure support frame uses glass fiber rods, which are light and hard, high mechanical strength, anti-aging, high temperature resistance, corrosion resistance, and durable! The ender 3 enclosure structure is stable and the space is abundant.
- We are the official Creality 3D store! We provide professional after-sales support, and more than 20 engineers provide 24/7 customer service with 3-year limited and lifetime technical assistance, please kindly contact us directly (seller) via ask a question.
- Ideal Gift: This is undoubtedly the latest perfect design for 2024. It has a grand appearance and classic line art design, with beautiful dark lines on the surface. Whether it's Thanksgiving, Christmas, Memorial Day, Valentine's Day, or Father's Day, it's an ideal gift for parents, family, husbands, friends, and boyfriends.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 28.35 x 23.62 x 18.90 inches
See On Amazon #9
Creality Ender Enclosure Fireproof and Dustproof for Ender 3V2/Ender 3V2 Neo/Ender 3 Pro/Ender 3/Ender 3 Neo for Anycubic Elegoo 3D Printer 18.89 * 23.62 * 28.34"/480 * 600 * 720mm
Asin: B0998XVMQ1 | Model: Tent | PartNumber: Tent
Constant Temperature: Keep A Constant Temperature Printing Environment, Reduce The Impact Of Printed Products When Low-- Temperature Weather, Improve Printing Stability.
Note:Storage Size28.34*23.62*18.89(720*600*480Mm). Compatible For Creality Ender 3V2/Ender 3Pro/Ender 3 For Anycubic Elegoo 3D Printer, Please Confirming Your Printer's Size Firstly..
Table Structure: Equipped With A Selection Of Iron Pipes, Stable Structure, And Abundant Space..
Safety Preferred, This Ender Enclousre Pass The Flame Resistance Test With Test Report. Dustproof And Good Noise Reduction..
Features
- Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room!
- Safety preferred, This Ender enclousre pass the flame resistance test with test report. Dustproof and good noise reduction.
- Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability
- Table Structure: Equipped with a selection of Iron pipes, stable structure, and abundant space.
- NOTE:Storage Size28.34*23.62*18.89(720*600*480mm). Compatible for Creality Ender 3V2/Ender 3Pro/Ender 3 for Anycubic Elegoo 3D Printer, please Confirming your printer's size firstly.
- See more on Amazon...
Brand: Lutyr | Manufacturer: Creality
Dimensions: 18.90 x 28.35 x 23.62 inches | Weight: 3.45 pounds
See On Amazon #10
3D Printer Enclosure for Creality Ender 3/ Ender 3 Pro/Ender 3 V2-Fireproof & Dustproof Tent Constant Temperature Protective Cover for Anycubic Elegoo 3D Printers 25.6 21.6 29.5
Asin: B0B67WLTBF | Model: EC-3 | PartNumber: EC-3 | Ean: 0783970261229 | UPC: 783970261229
[Noise Reduce] Enclosed Build Chamber Would Effectively Block The Noise During Printing. Get A Slight Reduction In The Already Low Noise Out Put The Printer..
[Easy Installation]5 Minutes Quick Installation. No Extra Tools Required. With Glass Fiber Cube And Stainless Steel Corner That Features Light And Strong..
[Flame Retardant] This 3D Printer Used Aluminum Foil Inside That Resist 600°C ~800 °C To Isolate Accidentally Fire. Aluminum Material For More Heat Retention..
[Constant Temprature] Keep A Constant Temperature Printing Enviroment. Reducing The Bad Impact To 3D Prints. Improve The Prints Stability At Warm Status. Help Regulate The Temperature And Reduce Drafts For Improved Print Quality And Keep Curious Fingers (Or Paws) Off Your Print.C.
Features
- [Multifunction Structure] hinged doors on the front of Enclosure. 25.6 21.6 29.5 Size Compitable with 99% FDM printers,Ender 3, Ender 3 Pro, Ender 3 V2,Ender 3 S1 PRO,Ender 3 S1,Ender 5,Ender 7,Anycubic Kobra, Anycubic Mega Pro.ELEGOO Naptune 3. No glue is required for assembly and can easily disassembled for moving or replacing.
- [Constant Temprature] Keep a constant temperature Printing Enviroment. Reducing the Bad impact to 3D prints. improve the prints stability at warm status. Help Regulate the temperature and reduce drafts for improved print quality and keep curious fingers (or paws) off your print.c
- [Noise Reduce] Enclosed build chamber would Effectively Block the noise during printing. Get a slight reduction in the already low noise out put the printer.
- [Flame Retardant] This 3D Printer used aluminum foil inside that resist 600 C ~800 C to Isolate accidentally fire. aluminum material for more heat retention.
- [Easy Installation]5 minutes quick installation. No extra tools required. With Glass fiber Cube and stainless steel corner that features light and strong.
- See more on Amazon...
First Available: 07/11/2022
Brand: UNIDO | Manufacturer: Unido
Dimensions: 29.53 x 21.65 x 25.59 inches
Warranty: 2 year manufacturer
See On Amazon #11
3-in-1 Multifunctional 3D Printer Enclosure Laser Engraver Eye Protective Shield Cover Resin 3D Printer Fireproof Tent with Fume Extractor Smoker Absorber Filament Dryer Dust Cover (3in1 Tent)
Asin: B0BMLKG9S4 | Model: Multifunctional 3d printer enclosure | PartNumber: Multifunctional 3d printer enclosure
Add A Brown Removable Filter Membrane: Used For Filtering Ultraviolet Rays With Laser Engraving Head Or Uv Curable Printer To Protect Eyes; Add Smoke Exhaust Interface And Smoke Pipe: It Is Helpful To Discharge Harmful Gas And Smoke. And 5W Led Light With Usb Plug: Convenient For Users To Observe The Working State Of The Machine At Dark Environment.
Package: 1Set Unassemble 3D Printer Enclosure(3D Printer And Screen Is Not Included), 1Pc Brown Removable Filter Membrane, 1Pc Led Light, 1Pc 1.5Meters Extended Length 75Mm Smoke Exhaust Pipe..
You Need To Install It By Yourself According To Instruments, Easy, The Od Dimensions: 535W*635L*750H Mm; Id Dimensions: 500W*635L*750H Mm, N.W: 2Kg. This Enclosure Can Be Suitable For Small Laser Engraver, Most Resin 3D Printers And Some Fdm Printers Like Ender 3, Cr6 Se, Please Must Confirm Your Printer Whole Dimensions Before Purchasing To Confirm The Fitness..
Providing Stable Printing Environment To Improve Printing Quality: Reduce The Interference Of External Environment On The Printer, Especially The Temperature Difference Interference. Keep Warm And Reduce Heat Loss, Reduce Warping And Lift Increase The Printing Success Rate And Printing Effect, Especially For Printing Of Abs, Petg And Other High-Temperature Filaments..
Features
- Waterproof & Fireproof: It can store 3D printers to prevent dust, water, fire and heat Use. Protect family members: As the printer has mechanical moving Hotbed and high-temperature nozzles, which can be Potential damage to hands and body. Adding protective cover can avoid children from touching the machine by mistake.
- Providing stable printing environment to Improve printing quality: reduce the interference of external environment on the printer, especially the temperature difference interference. Keep warm and reduce heat loss, reduce warping and lift Increase the printing success rate and printing effect, Especially for printing of ABS, PETG and other high-temperature filaments.
- Add a brown Removable filter membrane: used for filtering ultraviolet rays with laser engraving head or UV curable printer to protect eyes; Add Smoke exhaust interface and smoke pipe: It is helpful to discharge harmful gas and smoke. And 5W LED light with USB plug: convenient for users to observe the working state of the machine at dark environment
- You need to install it by yourself according to instruments, easy, the OD dimensions: 535W*635L*750H mm; ID dimensions: 500W*635L*750H mm, N.W: 2kg. This enclosure can be suitable for small laser engraver, most resin 3D Printers and some FDM printers like Ender 3, CR6 SE, Please must confirm your printer whole dimensions before purchasing to confirm the fitness.
- Package: 1set unassemble 3D Printer enclosure(3D Printer and screen is not included), 1pc brown Removable filter membrane, 1pc led light, 1pc 1.5meters extended length 75mm smoke exhaust pipe.
- See more on Amazon...
Brand: HOCENWAY | Manufacturer: Hocenway
Dimensions: 29.53 x 23.62 x 21.06 inches | Weight: 4.85 pounds
Warranty: No
See On Amazon #12
ELEGOO 3D Printer Enclosure, Fireproof and Dustproof 3D Printer Cover Constant Temperature Tent for Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Ender 3/Ender 3 V2/Ender 3 S1/Kobra 2
Asin: B0CP8QHJ3Z
【Better Protection】Limits The Printer And Printing Material Contact With Exterior Elements Such As Dust, Reduce Maintenance Operation And Risk Of Bad Prints.
【User Friendly】Transparent Windows On Top And Front Offer Visibility Of Ongoing Prints, Zipper Opening Design Make A Convenient Access To The Printer. Inner Mesh Pocket Can Be Used To Store Required Tools.
【Easy To Use】5 Minutes Quick Installation And Disassembly, Folding To Storage When You Don’T Need It. The Lightweight And Durable Fiberglass Frame Makes It Easy To Move Anywhere You Want.
【Enhanced Safety】The Enclosure Made Of Aluminum Foil Oxford Cloth, Flame-Retardant, Fireproof And Excellent Heat-Resistant, Absolutely Safe And Durable.
【Wide Compatibility】Size Of The Enclosure Is 25.5”X21.6”X29.5”/650X550x750mm, Perfectly Fit For Neptune 3 Pro/Neptune 4/Neptune 4 Pro/Ender 3/Ender 3 V2/Ender 3 S1/Ender 3 Pro/Kobra 2 And More.
Features
- Stable Print Temperature 3D printing enclosure offers a more stable environment temperature for your printers. Warping and bad adhesion risks are reduced
- Wide Compatibility Size of the enclosure is 25.5 x21.6 x29.5 /650x550x750mm, perfectly fit for Neptune 3 pro/Neptune 4/Neptune 4 pro/Ender 3/Ender 3 V2/Ender 3 S1/Ender 3 Pro/Kobra 2 and more
- Better Protection Limits the printer and printing material contact with exterior elements such as dust, reduce maintenance operation and risk of bad prints
- Enhanced Safety The enclosure made of aluminum foil Oxford cloth, flame-retardant, fireproof and excellent heat-resistant, absolutely safe and durable
- User Friendly Transparent windows on top and front offer visibility of ongoing prints, zipper opening design make a convenient access to the printer. Inner mesh pocket can be used to store required tools
- Easy to Use 5 minutes quick installation and disassembly, folding to storage when you don t need it. The lightweight and durable fiberglass frame makes it easy to move anywhere you want
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
See On Amazon #13
Makacces Resin 3D Printer Enclosure with Ventilation, 12V Fan Vent Pipe with Speed Controller, Fire Resistant Fabric,UV Light Shelter, Ventilate Resin Smell, Keep Warm, for Common LCD 3D Printers
Asin: B0C4FP3W6Q | Model: FRP750 | PartNumber: FRP750 | Ean: 0785957429004 | UPC: 785957429004
Smoke Extraction: The Multifunctional 3D Printer Enclosure Effectively Extracts Smoke And Fumes Generated During The Printing Process, Creating A Healthier And Safer Printing Environment..
Wide Compatibility: Enclosure Size: 25"*21"*29.5"(L X W X H), Can Compatible For Most Lcd Printers And Fdm 3D Printers..
Uv Light Shelter :The Tent Features A Brown Window That Blocks Most Uv Light That Could Impact The Resin Materials..
12V Fan Vent With Speed Control: This 3D Printer Enclosure Equipped With A 12V Fan Vent, The Tent Provides Ventilation To Prevent Smoke And Fumes Buildup During Printing. The Speed Control Feature Allows You To Adjust The Airflow According To Your Needs..
Features
- Fire-Resistant Fabric & Keep Warm : The Resin 3D Printer Tent with Ventilation is made with fire-resistant fabric, ensuring safety while 3D printing; Designed to keep the printing area warm, the tent helps maintain a stable temperature, which can improve print quality for both FDM and LCD 3D printers.
- 12V Fan Vent with Speed Control: This 3D Printer Enclosure equipped with a 12V fan vent, the tent provides ventilation to prevent smoke and fumes buildup during printing. The speed control feature allows you to adjust the airflow according to your needs.
- Smoke Extraction: The Multifunctional 3D Printer Enclosure effectively extracts smoke and fumes generated during the printing process, creating a healthier and safer printing environment.
- UV Light Shelter :The tent features a brown window that blocks most UV light that could impact the resin materials.
- Wide Compatibility: Enclosure size: 25*21*29.5(L x W x H), can compatible for most LCD printers and FDM 3D printers.
- See more on Amazon...
Brand: Makacces | Manufacturer: Makacces
Weight: 4.41 pounds
See On Amazon #14
FNATR 3D Printer Enclosure Ender 3 Enclosure Resin 3D Printer Enclosure LED HEPA Ventilation 3D Printer Cover for Ender 3 S1/Elegoo Neptune 4/Bambu Lab A1/Prusa MK4/Ankermake M5
Asin: B0CCNYG5V1
【Reduce Noise】An Enclosure Can Effectively Reduce The Noise Generated By The Motors And Fans Of The Printer, Creating A More Comfortable Working Environment For You..
【Worry-Free Shopping Experience】At Fnatr, Your Satisfaction Is Always Our Priority. If You Find Your Enclosure Is Accidentally Damaged In Transit, Contact Us For Free Replacements Without Returning It..
【Led Light】The Enclosure Has An Led Light That Gives You A Better View Of The Printer When The Surrounding Environment Is Dark. The Soft White Light Is Also Good For You To Display Your Printer Or Models..
【Remove Odors And Harmful Particles】The Enclosure Has An Exhaust Fan With Hepa Filter That Helps To Prevent The Toxic Gas That Could Be Generated When Printing With Certain Materials, Such As Abs, Petg, Nylon, Getting Into Your Home Or Office..
Features
- Larger Internal Space With a significant increase in Internal Size (585W*610D*570Hmm or 23.0W*24.0D*22.4H"), the FNATR #02 Box 3D printer enclosure now fits more models including Creality Ender 3 S1, Ankermake M5, Prusa MK4/MK3S+, Bambu Lab P1P, Elegoo Neptune 4. Do remember to check the COMPATIBILITY LIST (see product images) before placing an order.
- Remove Odors and Harmful Particles The enclosure has an exhaust fan with HEPA filter that helps to prevent the toxic gas that could be generated when printing with certain materials, such as ABS, PETG, Nylon, getting into your home or office.
- Reduce Noise An enclosure can effectively reduce the noise generated by the motors and fans of the printer, creating a more comfortable working environment for you.
- LED Light The enclosure has an LED light that gives you a better view of the printer when the surrounding environment is dark. The soft white light is also good for you to display your printer or models.
- Worry-free Shopping Experience At FNATR, your satisfaction is always our priority. If you find your enclosure is accidentally damaged in transit, contact us for free replacements without returning it.
- See more on Amazon...
Brand: FNATR | Manufacturer: FNATR
Dimensions: 22.40 x 24.00 x 23.00 Inches | Weight: 26.46 pounds
See On Amazon #15
3D SOURCERER DELACK 3D Printer Enclosure Kit with LED Light | Made for Prusa MK4, Prusa Mini, Prusa MK3 3D Printers | Compatible with IKEA Lack Table | Plexiglass Cover for Constant Temperature
Asin: B0CC7Q64GC
Led Light Included - Included In The Delack Enclosure Is An Led Light With A 5V Power Brick So That You Can Add An Led Light To Your 3D Printer Enclosure For Easily Viewing Your 3D Prints At Night. We've Managed To Make The Prints For The Led Light Compatbile With The Smaller Print Bed Of The Prusa Mini So That Everyone Can Add The Led To Their Setup!.
4 Inch Duct For Venting Fumes - If You Prefer To Externally Ventilate Your 3D Printer, The Delack 3D Printer Enclosure Has An Adapter For The 120Mm Fan Setup So That You Can Vent The Fumes From Your 3D Printer Enclosure Using A 4 Inch Duct..
Wyze Cam V3 For Remote Monitoring - Monitoring Your Prusa 3D Printers Can Be A Challenge Since A Camera Is Not Built In To The 3D Printer. With The Delack 3D Printer Enclosure, We Have Added A Simple Corner Adapter So That You Can Add A Wyze Cam V3 To Your Enclosure For Monitoring Your Printer Remotely..
Removable Corner Guards For Added Safety - The Plexiglass Corners Of 3D Printer Enclosure Can Be Sharp - To Prevent Unwanted Harm, Removable Corner Guards Are Available To Cover The Corners Of The Enclsoure For Added Safety..
Led Light Included - Included In The Delack Enclosure Is An Led Light With A 5V Power Brick So That You Can Add An Led Light To Your 3D Printer Enclosure For Easily Viewing Your 3D Prints At Night. We've Managed To Make The Prints For The Led Light Compatbile With The Smaller Print Bed Of The Prusa Mini So That Everyone Can Add The Led To Their Setup!.
Compatible With 120Mm Noctura Fans - The Delack Enclosure Features A Cutout On The Back Panel Of Plexiglass For Adding A 120Mm Noctura Fan For Temperature Control Of Your 3D Printer Enclosure. If You Prefer To Print Without A Fan, A Cover For The Cutout Can Be Printed And Use To Fill The Cutout At The Back Of The 3D Printer Enclosure..
550Mm X 486Mm X 450Mm (21.7" X 19.1" X 17.7") Size - With A Length Perfectly Matching The Ikea Lack Table, This Enclsosure Will Fit Flush With The Front And Back Of An Ikea Lack Table. If You Perfer To Place Your 3D Printer Enclosure On Your Desk Or Countertop, The Delack Is Narrower Than An Ikea Lack Table, Saving Space While Still Providing The Perfect Amoutn Of Space For The Prusa Mk4, Prusa Mini, Or Prusa Mk3 To Function Properly..
Hepa Filter For Air Filtration - If You Print With Materials That Cause Fumes, Add A Hepa Filter In Addition To A 120Mm Fan To Your 3D Printer Enclosure. With The Delack 3D Printer Enclosure, A Filter Mount Made For An Economical Hepa Filter Can Be Easily Added To The 120Mm Fan Setup..
Upgrade Your Lack Enclosure - If You Are Looking To Upgrade Your Lack Enclosure, This Is The Perfect Enclosure For You. Made To Fit Perfectly On An Ikea Lack Table, The Delack Enclosure Is A Step Up In Quality As Well As Functionality..
Features
- COMPATIBLE WITH PRUSA MK4, PRUSA MINI & PRUSA MK3 - Create a stable environment for your Prusa MK4, Prusa Mini, or Prusa MK3 with the DELACK Enclosure. WIth a wide variety of filament routing options, the DELACK Enclosure is compatible with a wide variety of 3D printing setups and is adaptable to your specific workspace.
- UPGRADE YOUR LACK ENCLOSURE - If you are looking to upgrade your LACK Enclosure, this is the perfect enclosure for you. Made to fit perfectly on an IKEA LACK table, the DELACK Enclosure is a step up in quality as well as functionality.
- LED LIGHT INCLUDED - Included in the DELACK Enclosure is an LED light with a 5V power brick so that you can add an LED light to your 3D printer enclosure for easily viewing your 3D prints at night. We've managed to make the prints for the LED light compatbile with the smaller print bed of the Prusa Mini so that everyone can add the LED to their setup!
- 550MM x 486MM x 450MM (21.7 x 19.1 x 17.7) SIZE - With a length perfectly matching the IKEA LACK table, this enclsosure will fit flush with the front and back of an IKEA LACK table. If you perfer to place your 3D printer enclosure on your desk or countertop, the DELACK is narrower than an IKEA LACK table, saving space while still providing the perfect amoutn of space for the Prusa MK4, Prusa Mini, or Prusa MK3 to function properly.
- LED LIGHT INCLUDED - Included in the DELACK Enclosure is an LED light with a 5V power brick so that you can add an LED light to your 3D printer enclosure for easily viewing your 3D prints at night. We've managed to make the prints for the LED light compatbile with the smaller print bed of the Prusa Mini so that everyone can add the LED to their setup!
- COMPATIBLE WITH 120MM NOCTURA FANS - The DELACK Enclosure features a cutout on the back panel of plexiglass for adding a 120mm Noctura fan for temperature control of your 3D printer enclosure. If you prefer to print without a fan, a cover for the cutout can be printed and use to fill the cutout at the back of the 3D printer enclosure.
- WYZE CAM V3 FOR REMOTE MONITORING - Monitoring your Prusa 3D printers can be a challenge since a camera is not built in to the 3D printer. With the DELACK 3D Printer Enclosure, we have added a simple corner adapter so that you can add a WYZE CAM V3 to your enclosure for monitoring your printer remotely.
- REMOVABLE CORNER GUARDS FOR ADDED SAFETY - The plexiglass corners of 3D printer enclosure can be sharp - to prevent unwanted harm, removable corner guards are available to cover the corners of the enclsoure for added safety.
- HEPA FILTER FOR AIR FILTRATION - If you print with materials that cause fumes, add a HEPA filter in addition to a 120mm fan to your 3D printer enclosure. With the DELACK 3D Printer Enclosure, a filter mount made for an economical HEPA filter can be easily added to the 120mm fan setup.
- 4 INCH DUCT FOR VENTING FUMES - If you prefer to externally ventilate your 3D printer, the DELACK 3D Printer Enclosure has an adapter for the 120mm fan setup so that you can vent the fumes from your 3D printer enclosure using a 4 inch duct.
- See more on Amazon...
Brand: 3D SOURCERER | Manufacturer: Willis Worxs, LLC
Dimensions: 17.72 x 21.65 x 19.13 inches | Weight: 8.50 pounds
See On Amazon #16
FUNGDO Multifunctional 3D Printer Enclosure kit 3D Printer Tent Fume Extractor Smoker Absorber Ventilate Resin Smell Filament Odor Warmer Filament Dryer Dust Cover Waterproof Reduce Noise(Small)
Asin: B0B24W5QXS | Model: Fun-clo0524 | PartNumber: Fun-clo0524 | Ean: 0724164996572 | UPC: 724164996572
3.Multifunctional Usage. Excellent Warming Affect With Exhaust Fan Make The Enclosure To Have Unexpected Dryer Function, When Test Ender 3 To Print Abs Filament, The Inner Humidity Is 65%, 20 Minutes Later, Interior Humidity Drop To 34%(With Exhaust Fan On), For Long Time,Humidity Would Low To 26%. This Enclosure Also Could Be A Dust Cover , Waterproof Tent, Uv Light Shelter And Can Reduce Working Noise..
5:Wide Compatibility .Small Version Inner Size W18.9"*D23.6"*H28.3"(48Cm*60Cm*72Cm), Can Compatible For Most Lcd Printer Under 13.6 Inch And Fdm 3D Printer Size Like Ender 3.
4. Easy To Install & Convenient To Use . Assemble The Enclosure Just Like A Simple Tent; With Lighting Bar And Observation Window, Easy To Watch Printing Progress; The Window Made Of Dark Transparent Material,All Zippers Are Air Tighten ,So Allow Lcd Printer Working Without Acrylic Cover And Allow Resin Inside Without Been Cured For Long Time Storage; Both Side With Exhaust Fan Seat,Free To Arrange Extract Direction According To Need; The Valve For Anti Backflow Help Easy To Install Vent On Wall.
2.Enhanced Warming Affect,Contribute To Better Printing Quality And High Success Rate.When Print Ender-3 With Abs Filament (Nozzle 240℃,Bed 110℃, Room Temp.27℃),20-30 Min. Later, Interior Temp. Could Go To 41-42℃, With This Constant Temp., Print Object Not Easy Wrap On Bottom Or Crack Between Layers ; Print An Epax 10.1 Inch Mono Lcd Printer, At Room Temp.27℃, Enclosure Can Go Up To 33-35℃, Which Means Allow Resin Flow Faster, Especially In Cold Days,This Enclosure Will Help To Print Better.
Features
- 1. Effectively Stop 3d Printing Fume Or Odor Affect Your Nose And Health ! The enclosure with excellent airtight performance, can insulate the smell emit from 3d printer resin or melted filament in time, then extract the smelly air out quickly by ventilation system.No more nasty fumes in the working room!
- 2.Enhanced Warming Affect,Contribute To Better Printing Quality And High Success Rate.When Print ender-3 with ABS filament (nozzle 240 ,bed 110 , room temp.27 ),20-30 min. later, interior temp. could go to 41-42 , with this constant temp., print object not easy wrap on bottom or crack between layers ; print an epax 10.1 inch mono LCD printer, at room temp.27 , enclosure can go up to 33-35 , which means allow resin flow faster, especially in cold days,this enclosure will help to print better
- 3.Multifunctional Usage. Excellent warming affect with exhaust fan make the enclosure to have unexpected Dryer function, when test ender 3 to print ABS filament, the inner humidity is 65%, 20 minutes later, interior humidity drop to 34%(with exhaust fan on), for long time,humidity would low to 26%. This enclosure also could be a Dust Cover , Waterproof Tent, UV light shelter and can reduce working noise.
- 4. Easy to install & Convenient to Use . Assemble the enclosure just like a simple tent; with lighting bar and observation window, easy to watch printing progress; the window made of dark transparent material,all zippers are air tighten ,so allow LCD printer working without acrylic cover and allow resin inside without been cured for long time storage; both side with exhaust fan seat,free to arrange extract direction according to need; the valve for anti backflow help easy to install vent on wall
- 5:Wide Compatibility .Small version Inner size W18.9*D23.6*H28.3(48cm*60cm*72cm), can compatible for most LCD printer under 13.6 inch and FDM 3D printer size like Ender 3
- See more on Amazon...
Brand: FUNGDO | Manufacturer: FUNGDO
Dimensions: 48.00 x 60.00 x 72.00 inches | Weight: 9.05 pounds
See On Amazon #17
JAYO 3D Printer Enclosure, Constant Temperature 3D Printer Cover Protective for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1 FDM 3D Printers Tent, Fireproof&Dustproof, Room Storage, 25.6 21.6 29.5
Asin: B0C243PNSG | Model: JWUS-WE-650*550*750mm | PartNumber: JWUS-WE-650*550*750mm
【Multiple Protections】: Waterproof And Fireproof 3D Printer Enclosure For Creating A Safer Printing Environment. The External Adopts Waterproof Glass Fabric Cloth Avoids The Outside Moisture Effect On You 3D Print.The Internal Adopts Flame Retardant Aluminum Foil Material, High Temperature Resistance (600°C--800°C). Jayo 3D Printer Enclosure Can Avoid The Dust Printing Process Effectively..
【Easy To Assemble】: Quick And Easy Installation. Offering Connect Tubes*4, 3-Way Corner Pipes*8, Fiberglass Pipes(26Cm)*8, Fiberglass Pipes(31Cm)*8, Fiberglass Pipes(36Cm)*8, 3D Printer Enclosure Cover*1. No Screws Required, No Need For Glue. You Can Assemble It In 5 Minutes Easily..
【Convenient Design】: Overall Design Of Jayo 3D Printer Enclosure Can Effectively Block The Noise Emitted By The Printer During Printing. A Seethrough Window For Observing Your Printing Process. A Storage Pocket On The Right For 3D Printing Accessories And Tools. A Small Velcro Window On The Left Is Designed For Operating 3D Printer Easily In Reduction Of Heat Loss During Printing. Zippers Smoothly..
【Constant Temperature Function】: Jayo 3D Printer Enclosure Is A Constant Temperature Protective Cover For A Better 3D Printing Result. Especially For Printing The High Heat Temperature Abs, Asa, Nylon Filaments. Keeping A Warm Printing Space When Low-Temperature Weather. Reducing The Warping, Stringing, Layer Shift, Bad Adhesion Issues On Your 3D Prints..
Features
- 3D Printer Enclosure Dimensions : 25.6 21.6 29.5 (650*550*750mm) JAYO 3D Printing Cover is compatible with small size FDM 3D Printers, Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro
- Constant Temperature Function : JAYO 3D Printer Enclosure is a constant temperature protective cover for a better 3d printing result. Especially for printing the high heat temperature ABS, ASA, Nylon filaments. Keeping a warm printing space when low-temperature weather. Reducing the warping, stringing, layer shift, bad adhesion issues on your 3d prints.
- Multiple Protections : Waterproof and Fireproof 3D Printer Enclosure for creating a safer printing environment. The external adopts waterproof glass fabric cloth avoids the outside moisture effect on you 3D print.The internal adopts flame retardant aluminum foil material, high temperature resistance (600 C--800 C). JAYO 3D Printer Enclosure can avoid the dust printing process effectively.
- Convenient Design : Overall design of JAYO 3D Printer Enclosure can effectively block the noise emitted by the printer during printing. A seethrough window for observing your printing process. A storage pocket on the right for 3d printing accessories and tools. A small Velcro window on the left is designed for operating 3D printer easily in reduction of heat loss during printing. Zippers smoothly.
- Easy to Assemble : Quick and easy installation. Offering Connect Tubes*4, 3-way Corner Pipes*8, Fiberglass Pipes(26cm)*8, Fiberglass Pipes(31cm)*8, Fiberglass Pipes(36cm)*8, 3D Printer Enclosure Cover*1. No screws required, no need for glue. You can assemble it in 5 minutes easily.
- See more on Amazon...
Brand: JAYO | Manufacturer: JAYO
Dimensions: 25.59 x 29.53 x 21.65 inches | Weight: 1.60 Kilograms
See On Amazon #18
FYSETC Resin 3D Printer 10.2x9.5x16 inch Blackout Cover Enclosure Protection Compatible with Mar 2 Pro/ LD-002H/Anycubi Photo S/ Photo Mono SE DLP LCD SLA 3D Printer
Asin: B08LR5QTGJ
Enclosure Bag Advandage: Our Elite Resin 3D Printer Blackout Cover Protects From Damage And Helps Contain Stray Resin Fumes. Also Acts As A Thermal Insulator, Keeping Heat In During Printing In Cold Weather. The Flaps On The Bottom Are The Perfect Height To Allow The Power Switch And Usb Port To Be Accessed While Not Uncovering The Machine..
Size: Lwh 10.2 X 9.5 X 16 Inch/ 260 X 240X 400 Mm, Blackout Cover To Keep The Device Secure Until You Have Time For Cleaning..
Material: Made Of Plush Pvc Laminated Polyester, Built To Last. It Is Waterproof, Dustproof And Safe From Tears And Abrasion, While Remaining Very Flexible..
A Must Upgrade Resin/ Lcd/ Uv Printer Accessory: Keep Your Resin 3D Printer Free Of Dust, Uv Rays And Moisture, With More Pliable Material! 3" Flaps On All Four Sides Allow Easy Access To Printer Controls And Ports..
Features
- Wide Application: Compatible with 3D Printer Resin LD-002R / LD-002H, Elego Mars / Mars Pro / Mars Pro 2 / Mars C, Anycubi Photon Mono 4K / Photon-S, Photon Zero, Photon Mono, Photon Mono SE, Inkspire, WanHao D7 & D8, X1 / X1-DJ / X1K / E6, QI Tech Shadow, Lon Orange 10, Lon Orange 30, Sonic Mini, SL 1 as well as Anycubi Wash and Cure Station 2.0
- A must upgrade resin/ LCD/ UV printer accessory: Keep your resin 3D printer free of dust, UV rays and moisture, with more pliable material! 3 flaps on all four sides allow easy access to printer controls and ports.
- Enclosure bag advandage: Our elite resin 3D printer blackout cover protects from damage and helps contain stray resin fumes. Also acts as a thermal insulator, keeping heat in during printing in cold weather. The flaps on the bottom are the perfect height to allow the power switch and USB port to be accessed while not uncovering the machine.
- Material: Made of plush PVC laminated polyester, built to last. It is waterproof, Dustproof and safe from tears and abrasion, while remaining very flexible.
- Size: LWH 10.2 x 9.5 x 16 inch/ 260 x 240x 400 mm, Blackout cover to keep the device secure until you have time for cleaning.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
Weight: 0.58 pounds
See On Amazon #19
Resin 3D Printer Enclosure with Ventilation, Fire Resistant Fabric UV Block Window, 12V Fan Vent Pipe Pre-Installed, Extract Smoke Smell Keep Warm, for Common LCD 3D Printers
Asin: B0CJ56RQJ4 | Ean: 0790901691352 | UPC: 790901691352
3.Pre-Installed Fan & Vent Pipe: With A 12V Fan And Vent Pipe Already Installed, This Enclosure Eliminates Unpleasant Smells Caused By Resin Materials..
5.Compatible With Common Lcd 3D Printers: This Enclosure Is Specifically Designed To Fit Most Lcd/Resin 3D Printers And Wash Machines, Like Photon Mono/Mars3, Providing A Convenient And Secure Solution For Resin Printing..
4.Health Improvement: The Enclosed Space Combined With The Ventilation System Effectively Removes Smoke And Fumes, Ensuring A Clean And Odor-Free Printing Experience. It Also Keeps The Printer Away From Dust Or Family Numbers..
2.Uv Block Window: The Enclosure Is Designed With A Uv Block Window, Which Protects The Resin Prints From Harmful Uv Rays While Allowing You To Monitor The Printing Progress And Quality..
Features
- 1.Ventilated and Fire Resistant: This resin 3D printer enclosure is equipped with ventilation to extract smoke and maintain a safe working environment. It also features fire-resistant fabric to ensure added safety during operation.
- 2.UV Block Window: The enclosure is designed with a UV block window, which protects the resin prints from harmful UV rays while allowing you to monitor the printing progress and quality.
- 3.Pre-installed Fan & Vent Pipe: With a 12V fan and vent pipe already installed, this enclosure eliminates unpleasant smells caused by resin materials.
- 4.Health Improvement: The enclosed space combined with the ventilation system effectively removes smoke and fumes, ensuring a clean and odor-free printing experience. It also keeps the printer away from dust or family numbers.
- 5.Compatible with Common LCD 3D Printers: This enclosure is specifically designed to fit most LCD/Resin 3D printers and wash machines, like Photon mono/Mars3, providing a convenient and secure solution for resin printing.
- See more on Amazon...
Manufacturer: BoRui R&D
Weight: 4.85 pounds
See On Amazon #20
Creality Official Ender 3 Enclosure with Smoke Vent, Fireproof and Dustproof Tent Constant Temperature Protective Cover Compatible with Creality Ender 3/3 Pro/ 3 V3 SE/ 3V2 Neo, 21.65* 25.59* 29.52 in
Asin: B0CP9CV58C
Safe To Use - The Interior Uses Pure Aluminum Film And Flame Retardant Appearance Material. Technically, If In A Fire, It Will Melt And Not Fire Itself Of The Enclosure And Will Not Spread As Well..
After-Sale Service - There Are More Than 20 Engineers For After-Sales Service And Provide 24/7 Customer Service With 1-Year Limited And Lifetime Technical Assistance. Please Contact Us Via “Ask A Question”Directly To Get The Professional Assistance..
Wide Compatibility - Enclosures Size：21.65* 25.59* 29.52 (550*650*750Mm)，Compitable With 99% Fdm 3D Printers Such As Creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6Se/Ender 5/ 5Pro/ 5S1/ Anycubic Mega Pro/ Elegoo Naptune 3 3D Printers.
Noise Reduce - Enclosed Build Chamber Would Effectively Block The Noise During Printing. Get A Slight Reduction In The Already Low Noise Out Put The Printer..
Features
- Constant Temprature - This 3D printer keeps a constant temperature printing environment, allowing for much more stable temperatures once the printer is operating.
- Noise Reduce - Enclosed build chamber would Effectively Block the noise during printing. Get a slight reduction in the already low noise out put the printer.
- Safe to Use - The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.
- Wide Compatibility - Enclosures size 21.65* 25.59* 29.52 (550*650*750mm) compitable with 99% FDM 3d printers such as creality Ender 3V2/3V2 Neo/Ender 3S1/3S1 Pro/3S1 Plus/Ender 3Pro/Ender 3/3Neo/Ender 3Max/Neo/Ender 6SE/Ender 5/ 5Pro/ 5S1/ Anycubic Mega Pro/ ELEGOO Naptune 3 3D Printers
- After-Sale Service - There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via ask a question directly to get the professional assistance.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon
Looking For Something Else?
Search