Solenoid Valves Brass 24V DC, PNXKTXO 1/4" DN8 Electric Water Valve Closed Water, Oil, Gas
Asin: B0CJXRJ5F6 | Model: US21_HAW_00J | PartNumber: US21_HAW_00J
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.✅Parameters - Pipe Size: 1/4 Inch Npt, Orifice Diameter: 2.5Mm, Working Temperature Range: -5 ℃~85 ℃. Media: Water, Oil, Gas..
✅Installation Method - First Wrap Polytetrafluoroethylene Tape Around The Threaded Interface, Then Connect The Solenoid Valve According To The Instructions, And Then Connect To The Power Supply According To The 24V Dc Standard Accepted By The Solenoid Valve, And Then Test The Tightness And Circuit. See Figure 3 For Special Precautions..
✅Single Flow Direction - The Solenoid Valve Has A Fixed Water Inlet And Water Outlet Direction, And Cannot Be Reversed，Normal Close Switch. Please Check The Flow Direction Arrow Carefully Before Installation..
✅Material - Solenoid Valve Is Made Of Copper Alloy Gravity Casting,Non-Corrosive, Working Pressure: 0-1Mpa..
Features
- Package Includes - 1 pcs electric solenoid valves. If you have any questions, please feel free to contact us, we will get back to you within 24 hours.
- Material - Solenoid valve is made of copper alloy gravity casting,non-corrosive, working pressure: 0-1Mpa.
- Parameters - Pipe size: 1/4 inch NPT, orifice diameter: 2.5mm, working temperature range: -5 ~85 . Media: water, oil, gas.
- Single Flow Direction - The solenoid valve has a fixed water inlet and water outlet direction, and cannot be reversed normal close switch. Please check the flow direction arrow carefully before installation.
- Installation Method - First wrap polytetrafluoroethylene tape around the threaded interface, then connect the solenoid valve according to the instructions, and then connect to the power supply according to the 24V DC standard accepted by the solenoid valve, and then test the tightness and circuit. See figure 3 for special precautions.
- See more on Amazon...
Brand: PNXKTXO | Manufacturer: PNXKTXO
Dimensions: 0.54 x 0.94 x 0.25 inches
See On Amazon Similar To Solenoid Valves Brass 24V DC
#1
Plum Garden 1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve, Stainless Steel
Asin: B074Z5SDG3 | Model: PL-220101 | PartNumber: PL-220101 | Ean: 0611677715496 | UPC: 611677715496
.Comes With A Ed 100% Encapsulated Coil Which Suitable To Operate In Continuous Service And Constant Energized..
.1/4Inch Dc 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve Wic Valve 2Ack Series 2-Way Normally Closed Solenoid Valve Is To Control On/Off Of Air And Inert Gas..
.This Solenoid Valve Has One G1/4" Inch Dn8 Inlet And One G1/4" Inch Dn8 Outlet Port. Valve Stays Close When The Coil Is De-Energized- And It Opens When Energized..
.2Ack Series Valve Is A Zero Differential Solenoid Valve Which Can Be Operated At 0 Psi (Vacuum)..
Features
- .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position.
- .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum).
- .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
- .This solenoid valve has one G1/4 inch DN8 inlet and one G1/4 inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized.
- .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas.
- See more on Amazon...
Brand: Plum Garden | Manufacturer: Plum Garden
Weight: 0.00 Pounds
See On Amazon #2
1/4" NPT Brass Electric Solenoid Valve 12VDC Normally Closed VITON (Standard USA Pipe Thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve by U.S. Solid.
Asin: B00APDNPXG | Model: USS2-00051 | PartNumber: USS2-00051 | Ean: 0853996003506 | UPC: 853996003506
This Highly Responsive Valve Will Open And Close In Less Than 1 Second When Actuated; Meaning It Will Open Or Close The Flow Instantaneously When Energized Or De-Energized. Also, Our U.S. Solid Engineers Have Determined That The Life Cycle Of This Valve Is Well Over A Million Cycles With Proper Operating Conditions And Maintenance..
As With All U.S. Solid Products, This Valve Comes With A One Year Warranty. If The Valve Does Become Defective Within The First Year Of Purchase, U.S. Solid Will Gladly Replace It..
Please Note: This Valve Is Not A Continuous Duty Valve And Should Not Be In Continuous Use For More Than 8 Hours In A Single Cycle; To Do So Will Shorten The Life Of The Valve And May Cause The Core Of The Valve To Burn Out. If You Need A Continuous Duty Valve For Your Project Please Search For Our U.S. Solid Motorized Ball Valves..
This Valve Was Manufactured With A Viton Seal. Viton Is The Most Durable And High Performance Rubber Material With The Ability To Resist High Temperatures And Corrosive Chemicals And Other Fluids Like Gasoline, Diesel Fuel, Oils, And Lubricants..
Features
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. SOLID
Dimensions: 3.62 x 3.15 x 2.36 inches | Weight: 0.00 pounds
See On Amazon #3
3/4" Brass Electric Solenoid Valve 110V AC Normally Closed Non-potable Water, air, Diesel by U.S. Solid
Asin: B007N0J98E | Model: USS2-00007 | PartNumber: USS2-00007 | Ean: 0853996003308 | UPC: 853996003308
This Highly Responsive Valve Will Open And Close In Less Than 1 Second When Actuated; Meaning It Will Open Or Close The Flow Instantaneously When Energized Or De-Energized. Also, Our U.S. Solid Engineers Have Determined That The Life Cycle Of This Valve Is Well Over A Million Cycles With Proper Operating Conditions And Maintenance..
As With All U.S. Solid Products, This Valve Comes With A One Year Warranty. If The Valve Does Become Defective Within The First Year Of Purchase, U.S. Solid Will Gladly Replace It..
Please Note: This Valve Is Not A Continuous Duty Valve And Should Not Be In Continuous Use For More Than 8 Hours In A Single Cycle; To Do So Will Shorten The Life Of The Valve And May Cause The Core Of The Valve To Burn Out. If You Need A Continuous Duty Valve For Your Project Please Search For Our U.S. Solid Motorized Ball Valves..
This Valve Was Manufactured With A Viton Seal. Viton Is The Most Durable And High Performance Rubber Material With The Ability To Resist High Temperatures And Corrosive Chemicals And Other Fluids Like Gasoline, Diesel Fuel, Oils, And Lubricants..
Features
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. Solid
Dimensions: 4.53 x 3.54 x 2.36 inches
See On Amazon #4
Motorized Ball Valve- 1/2" Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid
Asin: B06X9LWXMW | Model: USS-MSV00010 | PartNumber: USS-MSV00010 | Ean: 0888107082996 | UPC: 888107082996
9V-24V Ac/Dc- Works Effectively Over Entire Voltage Range; Will Open Or Close Valve In 3-5 Seconds; Limit Switch Minimizes Power After Valve Is Fully Open; Ideal For Projects Where An Automatic Return Is Necessary.
If Permanently Installed Outdoors, It Is Recommended To Place It Under A Shelter Or In A Protective Box To Prevent Prolonged Exposure To Rain..
Alternative To Solenoid Valves- Automatically Cuts Off Power Once Fully Open Or Fully Closed; This Reduces Likelihood Of Overheating, Making It A Great Alternative To Solenoid Valves For Projects Where A Valve Needs To Be Open For An Extended Period Of Time.
Please Note: The Solenoid Valve May Experience Leaks As A Result Of Impurities Accumulated Over Multiple Uses. This Issue Can Be Resolved By Disassembling The Valve And Thoroughly Cleaning It..
2 Wire Automatic Return Setup- Simple Two Wire Connection, Valve Largely De-Energizes After Opening; Returns To Fully Closed If Power Is Removed.
Npt Threading-½” Quality Brass Thread, Manufactured And Measured According To National Pipe Thread Standards; This Electrical Ball Valve Is Full Port, Meaning The Bore In The Ball Is A Full1/2”; This Minimizes Pressure Loss Through The Valve; Perfect For Home Automation Projects.
Features
- SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable; The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last
- NPT THREADING- quality brass thread, manufactured and measured according to National Pipe Thread standards; This electrical ball valve is full port, meaning the bore in the ball is a full1/2 ; This minimizes pressure loss through the valve; Perfect for home automation projects
- 9V-24V AC/DC- Works effectively over entire voltage range; Will open or close valve in 3-5 seconds; Limit switch minimizes power after valve is fully open; Ideal for projects where an automatic return is necessary
- 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening; Returns to fully closed if power is removed
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed; This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time
- Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
- If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. Solid
Dimensions: 4.00 x 4.00 x 4.00 Inches | Weight: 1.00 Pounds
See On Amazon #5
Beduan 2 Way Normally Closed DC 12V Electric Solenoid Air Valve 1/4" NPT
Asin: B07N2LGFYS | Model: kl04010 | PartNumber: kl04010 | Ean: 0659499206846 | UPC: 659499206846
【Temperature/ Pressure Range】 23-176°F, Pressure Range:115 Psi..
【Feature】This Solenoid Water Valve Is A Zero Differential Solenoid Valve Which Can Be Operated At 0 Psi (Vacuum). Comes With A Ed 100% Encapsulated Coil Which Suitable To Operate In Continuous Service And Constant Energized..
【Selenoid Valve Type】 2 Way Normally Closed (Valve Opens With Energized). Normally Closed Type With Long Life Span And Excellent Sealing..
【Port Coil Voltage】 12V Port Size :1/4" Female Inlet/Outlet Port..
Features
- Service Media/Material Air, Gas, Liquid, Water./ Anodized Aluminum
- Port Coil Voltage 12V Port size :1/4 Female inlet/outlet port.
- Temperature/ Pressure Range 23-176 F, Pressure Range:115 PSI.
- Selenoid Valve Type 2 Way Normally Closed (Valve opens with energized). Normally closed type with long life span and excellent sealing.
- Feature This solenoid water valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum). Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized.
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
Weight: 0.00 Pounds
See On Amazon #6
DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed
Asin: B016MP1HX0 | Model: ROCON-341 | PartNumber: ROCON-341 | Ean: 0600748801176 | UPC: 600748801176
Working Pressure:0.02-0.8Mpa. Its Working Temperature:32-158℉ (0-70℃)..
It Will Become Hot Because There Are So Many Coils Inside. It’S Normal And Safe Phenomenon. The Highest Working Temperature Of This Product Reaches 60℃. If You Want It Works Long Hours, You Should Find A N/O Normally Open Solenoid Valve..
Rated Power:4.8W..
Turn On Water When System Start;And Cut Off Water When System Stop..
Features
- DC 12V 1/4" Quick connect Solenoid valve.
- Turn on water when system start;and cut off water when system stop.
- Working pressure:0.02-0.8Mpa. Its working temperature:32-158 (0-70 ).
- Rated power:4.8W.
- It will become hot because there are so many coils inside. It s normal and safe phenomenon. The highest working temperature of this product reaches 60 . If you want it works long hours, you should find a N/O normally open solenoid valve.
- See more on Amazon...
Brand: DIGITEN | Manufacturer: DIGITEN
Dimensions: 0.71 x 2.40 x 0.91 inches | Weight: 0.00 Pounds
See On Amazon #7
U.S. Solid 1/4" Stainless Steel Electric Solenoid Valve 12VDC Normally Closed VITON
Asin: B00APD49BS | Model: USS2-00065 | PartNumber: USS2-00065 | Ean: 0853996003568 | UPC: 853996003568
This Highly Responsive Valve Will Open And Close In Less Than 1 Second When Actuated; Meaning It Will Open Or Close The Flow Instantaneously When Energized Or De-Energized. Also, Our U.S. Solid Engineers Have Determined That The Life Cycle Of This Valve Is Well Over A Million Cycles With Proper Operating Conditions And Maintenance..
As With All U.S. Solid Products, This Valve Comes With A One Year Warranty. If The Valve Does Become Defective Within The First Year Of Purchase, U.S. Solid Will Gladly Replace It..
Please Note: This Valve Is Not A Continuous Duty Valve And Should Not Be In Continuous Use For More Than 8 Hours In A Single Cycle; To Do So Will Shorten The Life Of The Valve And May Cause The Core Of The Valve To Burn Out. If You Need A Continuous Duty Valve For Your Project Please Search For Our U.S. Solid Motorized Ball Valves..
This Valve Was Manufactured With A Viton Seal. Viton Is The Most Durable And High Performance Rubber Material With The Ability To Resist High Temperatures And Corrosive Chemicals And Other Fluids Like Gasoline, Diesel Fuel, Oils, And Lubricants..
Features
- Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.
- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. Solid
Dimensions: 2.36 x 3.62 x 3.15 inches
See On Amazon #8
1/2" NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON from U.S. SOLID
Asin: B01N0Q4QYI | Model: JFSV00012 | PartNumber: JFSV00012 | Ean: 0853996003957 | UPC: 853996003957
This Highly Responsive Valve Will Open And Close In Less Than 1 Second When Actuated; Meaning It Will Open Or Close The Flow Instantaneously When Energized Or De-Energized. Also, Our U.S. Solid Engineers Have Determined That The Life Cycle Of This Valve Is Well Over A Million Cycles With Proper Operating Conditions And Maintenance..
As With All U.S. Solid Products, This Valve Comes With A One Year Warranty. If The Valve Does Become Defective Within The First Year Of Purchase, U.S. Solid Will Gladly Replace It..
Please Note: This Valve Is Not A Continuous Duty Valve And Should Not Be In Continuous Use For More Than 8 Hours In A Single Cycle; To Do So Will Shorten The Life Of The Valve And May Cause The Core Of The Valve To Burn Out. If You Need A Continuous Duty Valve For Your Project Please Search For Our U.S. Solid Motorized Ball Valves..
This Valve Was Manufactured With A Viton Seal. Viton Is The Most Durable And High Performance Rubber Material With The Ability To Resist High Temperatures And Corrosive Chemicals And Other Fluids Like Gasoline, Diesel Fuel, Oils, And Lubricants..
Features
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. Solid
Dimensions: 4.53 x 3.54 x 2.36 inches
See On Amazon #9
Beduan 24V 1/4" Inlet Water Solenoid Valve Normally Closed for RO Reverse Osmosis Pure System
Asin: B07NWCMWY3 | Model: 1kl-04410-WIV | PartNumber: 1kl-04410-WIV | Ean: 0659499241946 | UPC: 659499241946
Voltage : Dc 24V.
Rated Power : 5.5W.
Working Pressure : 0.02-0.8Mpa..
Size : 1/4" Tube.
Features
- Material: Metal , plastic
- Size : 1/4 tube
- Voltage : DC 24V
- Working Pressure : 0.02-0.8Mpa.
- Rated Power : 5.5W
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
Weight: 0.00 Pounds
See On Amazon #10
HFS(R) Brass Solenoid Valve Normally Closed for Water Air Gas (12V DC 1/4IN NPT)
Asin: B018WRJYPY | Model: SLV-12-01 | PartNumber: SLV-12-01 | Ean: 0789398118046 | UPC: 789398118046
[N/C]: The Solenoid Valve Is Normally Closed, Which Means It Is Closed When The Power Is Not Supplied, Which Effectively Ensures The Safety Of Use..
[Matters Needing Attention]: Amps Power Required By Adaptor: At Least 2A. As The Product Is Normally Closed Solenoid Valve, The Working Time Shall Not Be Too Long, And The Working Time Is Recommended To Be Less Than Half An Hour. If More Than Half An Hour Will Begin To Appear Heating State, After The Solenoid Valve Heating, Try To Let It Rest For Half An Hour Before Working..
[Wide Application]: Applicable Temperature: - 5 ℃ ~ 80 ℃,Working Pressure: Water, Air: 0 ~ 7Kgf/Cm2. Working Environment: Water, Air, Compressed Air And Some Stable Gases..
[Size]: 74Mm * 39Mm (2.91 '' * 1.535 ''), Thread Diameter: 12Mm (0.47 ''), Interface Pipe Diameter: 1 / 4 '' Npt Thread, Flow Diameter: 2.5Mm (0.098 '').
Features
- [MATERIAL]: The product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve
- [SIZE]: 74mm * 39mm (2.91 '' * 1.535 ''), thread diameter: 12mm (0.47 ''), interface pipe diameter: 1 / 4 '' NPT thread, flow diameter: 2.5mm (0.098 '')
- [N/C]: The solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use.
- [WIDE APPLICATION]: Applicable temperature: - 5 ~ 80 ,Working pressure: water, air: 0 ~ 7kgf/cm2. Working environment: water, air, compressed air and some stable gases.
- [MATTERS NEEDING ATTENTION]: Amps power required by adaptor: at least 2A. As the product is normally closed solenoid valve, the working time shall not be too long, and the working time is recommended to be less than half an hour. If more than half an hour will begin to appear heating state, after the solenoid valve heating, try to let it rest for half an hour before working.
- See more on Amazon...
Brand: HFS | Manufacturer: HFS
Dimensions: 2.95 x 1.97 x 1.77 inches | Weight: 0.60 pounds
See On Amazon #11
U.S. Solid Motorized Ball Valve- 3/4inches Brass Electrical Ball Valve with Standard Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid
Asin: B06XRJF4JG | Model: USS-MSV00019 | PartNumber: USS-MSV00019 | Ean: 0888107083146 | UPC: 888107083146
9V-24V Ac/Dc- Works Effectively Over Entire Voltage Range; Will Open Or Close Valve In 3-5 Seconds; No Power Expended Once Fully Open Or Fully Closed.
If Permanently Installed Outdoors, It Is Recommended To Place It Under A Shelter Or In A Protective Box To Prevent Prolonged Exposure To Rain..
Alternative To Solenoid Valves- Automatically Cuts Off Power Once Fully Open Or Fully Closed; This Reduces Likelihood Of Overheating, Making It A Great Alternative To Solenoid Valves For Projects Where A Valve Needs To Be Open For An Extended Period Of Time.
Please Note: The Solenoid Valve May Experience Leaks As A Result Of Impurities Accumulated Over Multiple Uses. This Issue Can Be Resolved By Disassembling The Valve And Thoroughly Cleaning It..
3 Wire, 2 Point Control Setup- Simple Three Wire Connection, With Two Points Of Control; No Energy Expended Once In Position.
Npt Threading- 3/4” Quality Brass Thread, Manufactured And Measured According To National Pipe Thread Standards; This Electrical Ball Valve Is Standard Port, Meaning The Bore In The Ball Is A Little Less Than 3/4”; Perfect For Home Automation Projects.
Features
- SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable; The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last
- NPT THREADING- 3/4 quality brass thread, manufactured and measured according to National Pipe Thread standards; This electrical ball valve is standard port, meaning the bore in the ball is a little less than 3/4 ; Perfect for home automation projects
- 9V-24V AC/DC- Works effectively over entire voltage range; Will open or close valve in 3-5 seconds; No power expended once fully open or fully closed
- 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control; No energy expended once in position
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed; This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time
- Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
- If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. Solid
Dimensions: 50.00 x 100.00 x 100.00 Centimeters
See On Amazon #12
BDFHYK Front Brake Line Lock Kit Roll Control Brake Lock for Brakes/Drag Race/Hill Holder Black
Asin: B08BC1F11H
🚗⚠【Attention】This Electric Brake Lock Is To Be Installed In The Front Braking System (For Rear-Wheel-Drive Vehicles) For Drag Race Staging Or Burnouts. Alternatively, In The Rear Braking System For Front-Wheel Drive Vehicles. This Solenoid Will Not Impede Normal Braking When Installed Correctly..
👍【The Best Service】We Value Your Shopping Experience And Strive To Offer A High-Quality Product And Service. And If You Have Any Problems, Please Tell Us And We Will Serve You Within 24 Hours..
✔️【What You Get】Each Kit Includes An Inline Fuse Connector, Indicator Light, Snap-Action Switch, 2Pcs 1/8-27Npt Brass Adapter, And 3Pcs Mounting Screws. High-Quality Stainless Steel Valve Assembly Gives It Strong Sturdiness. Voltage:12-24 Volt Dc Operation..
✔️【Safety&Stable】Brake Line Lock Is Designed To Be Mechanical As A Separate System, Which Means It Won't Fail Due To Leaks Or Loss Of Pressure. Fully-Enclosed Epoxy-Molded Electrical Coil Makes It Reliable; The Attractive Aluminum Fin Shell Enables It To Cool Down. The Wider Lightweight Base Provides Better Mounting Stability. Besides, It Has An Extra Threaded Port For The Brake Line Pressure Gauge..
Features
- WARM UP THE REAR TIRES BDFHYK line locks are used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, (which is often used for combustion) this makes the rear tires spin but keeps the car stationary.
- SAFETY&STABLE Brake line lock is designed to be mechanical as a separate system, which means it won't fail due to leaks or loss of pressure. Fully-enclosed epoxy-molded electrical coil makes it reliable; The attractive aluminum fin shell enables it to cool down. The wider lightweight base provides better mounting stability. Besides, it has an extra threaded port for the brake line pressure gauge.
- ATTENTION This electric brake lock is to be installed in the front braking system (for rear-wheel-drive vehicles) for drag race staging or burnouts. Alternatively, in the rear braking system for front-wheel drive vehicles. This solenoid will not impede normal braking when installed correctly.
- WHAT YOU GET Each kit includes an inline fuse connector, indicator light, snap-action switch, 2pcs 1/8-27NPT brass adapter, and 3pcs mounting screws. High-quality stainless steel valve assembly gives it strong sturdiness. Voltage:12-24 volt DC operation.
- THE BEST SERVICE We value your shopping experience and strive to offer a high-quality product and service. And if you have any problems, please tell us and we will serve you within 24 hours.
- See more on Amazon...
Brand: BDFHYK | Manufacturer: BDFHYK
See On Amazon #13
TAILONZ PNEUMATIC 1/4 Inch NPT 12V/24V/110V/220V Brass Electric Solenoid Valve 2W025-08 Normally Closed Water, Air, Diesel
Asin: B07X287BSX | Model: 2W025-08 DC12V | PartNumber: 2W025-08 DC12V | Ean: 8414791957603
【Material】Brass.
【Applicable】Irrigation Controls (Garden, Farm,Etc.), Liquid Controls ( Pipeline, Artificial River Etc. And Air Controls ( Lab, Factory, Etc.).
【Pressure Range】0-145Psi【Working Temperature Range】23-176°F.
【Size】1/4 Inch Npt.
Features
- Model 2W025-08;Voltage: DC12V
- Size 1/4 inch NPT
- Material brass
- Pressure range 0-145Psi Working temperature range 23-176 F
- Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.)
- See more on Amazon...
Brand: TAILONZ PNEUMATIC | Manufacturer: TAILONZ PNEUMATIC
See On Amazon #14
3/4" Brass Electric Solenoid Valve 12VDC N.C. Air Non-potable Water Fuel VITON
Asin: B00DQ1J4H0 | Model: USS2-00059 | PartNumber: USS2-00059 | Ean: 0853996003728 | UPC: 853996003728
This Highly Responsive Valve Will Open And Close In Less Than 1 Second When Actuated; Meaning It Will Open Or Close The Flow Instantaneously When Energized Or De-Energized. Also, Our U.S. Solid Engineers Have Determined That The Life Cycle Of This Valve Is Well Over A Million Cycles With Proper Operating Conditions And Maintenance..
As With All U.S. Solid Products, This Valve Comes With A One Year Warranty. If The Valve Does Become Defective Within The First Year Of Purchase, U.S. Solid Will Gladly Replace It..
Please Note: This Valve Is Not A Continuous Duty Valve And Should Not Be In Continuous Use For More Than 8 Hours In A Single Cycle; To Do So Will Shorten The Life Of The Valve And May Cause The Core Of The Valve To Burn Out. If You Need A Continuous Duty Valve For Your Project Please Search For Our U.S. Solid Motorized Ball Valves..
This Valve Was Manufactured With A Viton Seal. Viton Is The Most Durable And High Performance Rubber Material With The Ability To Resist High Temperatures And Corrosive Chemicals And Other Fluids Like Gasoline, Diesel Fuel, Oils, And Lubricants..
Features
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
- See more on Amazon...
Brand: U.S. Solid
Dimensions: 4.53 x 3.54 x 2.36 inches
See On Amazon #15
Beduan Brass Electric Solenoid Valve, 1/2" 24V Air Valve Normally Colsed for Water Air Gas Fuel Oil
Asin: B07N644BL9 | Model: 1kl-04210-BVW | PartNumber: 1kl-04210-BVW | Ean: 0659499213523 | UPC: 659499213523
Voltage: Dc 24V.
High Quality Normally Closed Electric Solenoid Valve For Air ,Water Or Oil..
Temperature Range: 41-185°F , Working Pressure: Water/Oil 0-0.5 Mpa ; Air 0-0.7 Mpa.
Port Size : 1/2" Female Npt , 2W160-15.
Features
- Durable brass construction and a quality copper solenoid. And high quality copper coil, NOT aluminium coil.
- Port Size : 1/2 Female NPT , 2W160-15
- Voltage: DC 24V
- Temperature Range: 41-185 F , Working Pressure: Water/Oil 0-0.5 Mpa ; Air 0-0.7 Mpa
- High quality normally closed electric solenoid valve for air ,water or oil.
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
See On Amazon #16
3/4" Stainless Steel Electric Solenoid Valve 12VDC N.C. Air Water Fuel VITON
Asin: B00DQ24GS6 | Model: USS2-00073 | PartNumber: USS2-00073 | Ean: 0853996003797 | UPC: 853996003797
This Highly Responsive Valve Will Open And Close In Less Than 1 Second When Actuated; Meaning It Will Open Or Close The Flow Instantaneously When Energized Or De-Energized. Also, Our U.S. Solid Engineers Have Determined That The Life Cycle Of This Valve Is Well Over A Million Cycles With Proper Operating Conditions And Maintenance..
As With All U.S. Solid Products, This Valve Comes With A One Year Warranty. If The Valve Does Become Defective Within The First Year Of Purchase, U.S. Solid Will Gladly Replace It..
Please Note: This Valve Is Not A Continuous Duty Valve And Should Not Be In Continuous Use For More Than 8 Hours In A Single Cycle; To Do So Will Shorten The Life Of The Valve And May Cause The Core Of The Valve To Burn Out. If You Need A Continuous Duty Valve For Your Project Please Search For Our U.S. Solid Motorized Ball Valves..
This Valve Was Manufactured With A Viton Seal. Viton Is The Most Durable And High Performance Rubber Material With The Ability To Resist High Temperatures And Corrosive Chemicals And Other Fluids Like Gasoline, Diesel Fuel, Oils, And Lubricants..
Features
- Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc.
- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. SOLID
Dimensions: 2.56 x 4.72 x 3.54 inches | Weight: 1.76 Pounds
See On Amazon #17
1" Brass Electric Solenoid Valve 24VAC Normally Closed VITON Air Non-potable Water Fuel
Asin: B00DQ1QUAO | Model: USS2-00063 | PartNumber: USS2-00063 | Ean: 0853996003759 | UPC: 853996003759
This Highly Responsive Valve Will Open And Close In Less Than 1 Second When Actuated; Meaning It Will Open Or Close The Flow Instantaneously When Energized Or De-Energized. Also, Our U.S. Solid Engineers Have Determined That The Life Cycle Of This Valve Is Well Over A Million Cycles With Proper Operating Conditions And Maintenance..
As With All U.S. Solid Products, This Valve Comes With A One Year Warranty. If The Valve Does Become Defective Within The First Year Of Purchase, U.S. Solid Will Gladly Replace It..
Please Note: This Valve Is Not A Continuous Duty Valve And Should Not Be In Continuous Use For More Than 8 Hours In A Single Cycle; To Do So Will Shorten The Life Of The Valve And May Cause The Core Of The Valve To Burn Out. If You Need A Continuous Duty Valve For Your Project Please Search For Our U.S. Solid Motorized Ball Valves..
This Valve Was Manufactured With A Viton Seal. Viton Is The Most Durable And High Performance Rubber Material With The Ability To Resist High Temperatures And Corrosive Chemicals And Other Fluids Like Gasoline, Diesel Fuel, Oils, And Lubricants..
Features
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. SOLID
Dimensions: 3.15 x 5.43 x 4.13 inches
See On Amazon #18
Motorized Ball Valve- 3/4" Brass Ball Valve with Manual Function, Standard Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid
Asin: B083XH811X | Model: USS-MSV00036 | PartNumber: USS-MSV00036 | Ean: 0888107094470 | UPC: 888107094470
2 Wire Automatic Return Setup- Simple Two Wire Connection, Limit Switch Minimizes Power After Valve Is Fully Open, And The Valve Returns To Fully Closed If Power Is Removed, Ideal For Projects Where An Automatic Return Is Necessary..
If Permanently Installed Outdoors, It Is Recommended To Place It Under A Shelter Or In A Protective Box To Prevent Prolonged Exposure To Rain..
Safe And Reliable- Made Of Durable Brass, This Valve Is Safe And Reliable. The Estimated Life Expectancy Of 80,000 To 100,000 Cycles Means It Is Built To Last..
Please Note: The Solenoid Valve May Experience Leaks As A Result Of Impurities Accumulated Over Multiple Uses. This Issue Can Be Resolved By Disassembling The Valve And Thoroughly Cleaning It..
Alternative To Solenoid Valves- Automatically Minimizes Power After Valve Is Fully Open, This Reduces Likelihood Of Overheating, Making It A Great Alternative To Solenoid Valve For Projects Where A Valve Needs To Be Open For An Extended Period Of Time..
9V-24V Ac/Dc- Works Effectively Over Entire Voltage Range, This Motorized Ball Valve Will Open Or Close Valve In 6~8 Seconds..
Features
- NPT THREADING- 3/4 quality brass thread, manufactured and measured according to National Pipe Thread standards.
- 9V-24V AC/DC- Works effectively over entire voltage range, this motorized ball valve will open or close valve in 6~8 seconds.
- 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, limit switch minimizes power after valve is fully open, and the valve returns to fully closed if power is removed, Ideal for projects where an automatic return is necessary.
- ALTERNATIVE TO SOLENOID VALVES- Automatically minimizes power after valve is fully open, this reduces likelihood of overheating, making it a great alternative to solenoid valve for projects where a valve needs to be open for an extended period of time.
- SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable. The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
- Please Note: The solenoid valve may experience leaks as a result of impurities accumulated over multiple uses. This issue can be resolved by disassembling the valve and thoroughly cleaning it.
- If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. Solid
Dimensions: 3.54 x 3.54 x 4.53 inches | Weight: 0.88 Pounds
See On Amazon #19
U.S. Solid 1/4" Brass Electric Solenoid Valve 24VAC Normally Closed VITON
Asin: B00APDV8MG | Model: USS2-00053 | PartNumber: USS2-00053 | Ean: 0853996003520 | UPC: 853996003520
This Highly Responsive Valve Will Open And Close In Less Than 1 Second When Actuated; Meaning It Will Open Or Close The Flow Instantaneously When Energized Or De-Energized. Also, Our U.S. Solid Engineers Have Determined That The Life Cycle Of This Valve Is Well Over A Million Cycles With Proper Operating Conditions And Maintenance..
As With All U.S. Solid Products, This Valve Comes With A One Year Warranty. If The Valve Does Become Defective Within The First Year Of Purchase, U.S. Solid Will Gladly Replace It..
Please Note: This Valve Is Not A Continuous Duty Valve And Should Not Be In Continuous Use For More Than 8 Hours In A Single Cycle; To Do So Will Shorten The Life Of The Valve And May Cause The Core Of The Valve To Burn Out. If You Need A Continuous Duty Valve For Your Project Please Search For Our U.S. Solid Motorized Ball Valves..
This Valve Was Manufactured With A Viton Seal. Viton Is The Most Durable And High Performance Rubber Material With The Ability To Resist High Temperatures And Corrosive Chemicals And Other Fluids Like Gasoline, Diesel Fuel, Oils, And Lubricants..
Features
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated; meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle; to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
- See more on Amazon...
Brand: U.S. Solid | Manufacturer: U.S. SOLID
Dimensions: 2.36 x 3.62 x 3.15 inches
See On Amazon #20
Wolo Electric Solenoid Air Valve
Asin: B0002Q83X8 | Model: 804-EV | PartNumber: 804-EV | Ean: 0080217008044, 7262318293823 | UPC: 080217008044
Country Of Origin : China.
Part Number: 804-Ev.
Package Weight: 1 Pounds.
Features
- Package Dimensions: 7.3 L x 4 H x 5.75 W (inches)
- Package Weight: 1 pounds
- Country of Origin : China
- Part Number: 804-EV
- See more on Amazon...
First Available: 11/14/2016
Brand: Wolo | Manufacturer: Wolo Manufacturing Corp.
Dimensions: 6.60 x 9.60 x 9.10 inches | Weight: 1.00 Pounds
See On Amazon
Looking For Something Else?
Search