20dB High Gain LNA RF Power Preamplifier Module, Full Band Low Noise Amplifier for Shortwave, FM Radio, Cable TV Signal Amplifier (Ship with 2500mAh Li Ion Battery)
Asin: B0CL5CMN84 | Model: Zyyinicot12rxuv0-11 | PartNumber: Zyyinicot12rxuv0-11
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Parameters: Low Noise Amplifier Module1.95Ghz At 20Db High Gain, Input And Output Impedance: 50Ω, Bandwidth: 0.1Mhz‑6Ghz..
Power Supply: Battery Less Version Needs Bias Tee Bias Power Supply, Some Devices Come With Bias Power Supply Function Such As: For Sdrplay 1A..
Applicable: Rf Amplifier Has Excellent Performance, Excellent Uniformity And High Reliability. It Is Suitable For Shortwave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Etc..
Stable Performance: Rf Amplifier Ultra Bandwidth, High Reliability, Not Easy To And Fall Off. Amplifier Module With Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable..
Features
- Professional: High linearity,ultra low noise gain block amplifier. High linearity: +35dBm output IP3; high input power ruggedness, +22dBm continuous wave.
- Stable Performance: RF amplifier ultra bandwidth, high reliability, not easy to and fall off. Amplifier module with wide frequency range, high gain, low noise figure, unconditionally stable.
- Parameters: Low noise amplifier module1.95GHz at 20dB high gain, input and output impedance: 50 , bandwidth: 0.1MHz 6GHz.
- Applicable: RF amplifier has excellent performance, excellent uniformity and high reliability. It is suitable for shortwave, FM radio, remote control receiver, cable TV signal amplifier, etc.
- Power Supply: Battery less version needs Bias Tee bias power supply, some devices come with bias power supply function such as: for sdrplay 1A.
- See more on Amazon...
Brand: Zyyini | Manufacturer: Zyyini
See On Amazon Similar To 20dB High Gain LNA RF
#1
Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier,Black
Asin: B00DQN3R9O | Model: LNA-200 | PartNumber: LNA-200 | Ean: 0615798401405 | UPC: 615798401405
Boost Clear Circuit Technology Features The Lowest Noise Figure (1Db Typical) To Deliver More Range And Reduce Signal Dropout And Pixelation.
Note: Using An Amplifier Does Not Guarantee You Will Pick Up More Tv Channels Even Though Your Signal Is Amplified; Dependencies Include Location Of Tv Towers, Building Materials, And The Actual Antenna Being Used..
Includes Winegard Boost Lna-200 Digital Tv Antenna Amplifier, 110V Adapter, Power Inserter, Hose Clamps And Printed Documentation. Designed And Built In The U.S.A..
20Db Twinamp Technology Separately Amplifies Vhf And Uhf Signals For Maximum Performance And Lowest Noise And Interference Levels On Any Non-Amplified Outdoor Antenna..
Features
- The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any NON-AMPLIFIED antenna; antenna required for use with preamplifier. ONLY WORKS WITH NON-AMPLIFIED ANTENNAS..Power Source Type: Corded Electric
- 20dB TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.
- Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation
- Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.
- Note: Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used.
- See more on Amazon...
First Available: 07/01/2013
Brand: Winegard | Manufacturer: Winegard Company
Dimensions: 2.75 x 4.38 x 1.50 inches | Weight: 0.50 pounds
See On Amazon #2
Nooelec Lana - Ultra Low-Noise Amplifier (LNA) Module for RF & Software Defined Radio (SDR) with Enclosure & Accessories. Wideband 20MHz-4000MHz Frequency Capability with Bias Tee & USB Power Options
Asin: B07XNLJ9X2 | Model: LaNA | PartNumber: LaNA | Ean: 0616469146564 | UPC: 616469146564
Can Be Powered Through Bias Tee (3.3V-5V), Usb, Or Dc Power With The Included Adapter. A Free Male Sma To Male Sma Connector Is Also Included.
Note: Some Sdrs Will Require A Dc Block Between The Lna And Sdr If Utilizing The External Power Options..
Made In North America. 2 Year Warranty! For More Information Review The Product Page Or Datasheet: Https://Www.Nooelec.Com/Datasheets/100812.
Higher Gain, Lower Noise Figure, Lower Power Consumption And Better Linearity Than Modules Based On Spf5189z And Similar Lna Mmics.
Features
- Improve the SNR and performance of your RTL-SDR, SDR or other radio! LaNA is a wideband (20MHz - 4GHz), high-performance, general purpose LNA module with an extremely low noise figure, installed in a quality aluminum enclosure
- Higher gain, lower noise figure, lower power consumption and better linearity than modules based on SPF5189Z and similar LNA MMICs
- Can be powered through bias tee (3.3V-5V), USB, or DC power with the included adapter. A free male SMA to male SMA connector is also included
- Made in North America. 2 year warranty! For more information review the product page or datasheet: https://www.nooelec.com/datasheets/100812
- NOTE: Some SDRs will require a DC block between the LNA and SDR if utilizing the external power options.
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.39 x 3.15 x 1.18 inches | Weight: 0.11 Pounds
See On Amazon #3
RTL-SDR Blog Wideband Low Noise Amplifier Bias Tee Powered
Asin: B07G14Q6XX | Model: WBLNA | PartNumber: WBLNA | Ean: 0651989513519 | UPC: 651989513519
Oip3 = 39.5 Dbm @ 900 Mhz, P1 Saturation = 22.7 Dbm @ 1960 Mhz.
Bias Tee Powered (Needs 3-5V Bias Tee Power).
Gain = 18.7 Db @ 900 Mhz.
Noise Figure = 0.6Db @ 900 Mhz.
Features
- Frequency range of 50 MHz to 4000 MHz
- Noise figure = 0.6dB @ 900 MHz
- OIP3 = 39.5 dBm @ 900 MHz, P1 Saturation = 22.7 dBm @ 1960 MHz
- Gain = 18.7 dB @ 900 MHz
- Bias Tee Powered (Needs 3-5v bias tee power)
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
See On Amazon #4
HiLetgo 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Amplifier
Asin: B01N2NJSGV | Model: 4330353723 | PartNumber: 4330353723
High Gain Low Noise Lna Amplifier.
It's Low In Properties Can Be A Perfect Match Various Circuits As Ideal Amplifier Buffer Amplifiers..
Maximum Power Output+13Dbm 20Mw.
Power Supply Voltage: 9-12 Vdc.
Features
- 0.1-2000MHz RF Wide Band Amplifier
- Power supply voltage: 9-12 VDC
- High Gain Low Noise LNA Amplifier
- Maximum power output+13dBm 20mW
- It's low in properties can be a perfect match various circuits as ideal amplifier buffer amplifiers.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
MakerFocus 3pcs NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module 2.4G 1100m with Antenna and 3pcs NRF24L01+ Breakout Adapter with 3.3V Regulator on-Board for Ar duino
Asin: B08LSPZHT8
Nrf24l01 Breakout Adapter: Ar Duino And Raspberry Pi Compatible, Allows For Easy Connection To Ar Duino; Small Power On Smd Led Indicator; On-Board 3.3V Voltage Regulator Accepts Your Ar Duino +5V Supply And Provides 3.3V For The Attached "Nrf24l01+" Module. "Nrf24l01+" Module May Be Purchased Here: Https://Www.Amazon.Com/Dp/B00o9o868g.
Package Content: This Is An Easy-To-Use Combination Product For Customers. The Packing List Includes: 3 * Nrf24l01+Pa+Lna Wireless Transceiver Rf Transceiver Module; 3 * Sma Antenna 2.4G 1100M; 3 * Nrf24l01+ Breakout Adapter.
Widely Application: It Can Be Wildly Used To Wireless Communication Between Modules, Such As Wireless Remote Control, Somatosensory Devices, Rfid, Nfc, Smart Grid, Smart Home, Wireless Audio Etc.
Nrf24l01+ Module: High-Performance Wireless Data Transmission Chip Nrf24l01 +, An Increase Of High-Power Pa And Lna Chips, Rf Switches, Band-Pass Filters And Other Professional Full Bidirectional Rf, Making The Effective Communication Distance Has Been Greatly Expanded; It Is 2.4Ghz Ism Band Transceiver For Ar Duino, Which Has The Abilities Of Auto-Acknowledge And Auto-Retransmit And Support Up To Six Channels Of Data Reception.
Features
- Instruction Manual: Please get the example link from Product guides and documents below
- NRF24L01+ Module: High-performance wireless data transmission chip NRF24L01 +, an increase of high-power PA and LNA chips, RF switches, band-pass filters and other professional full bidirectional RF, making the effective communication distance has been greatly expanded; It is 2.4GHz ISM band transceiver for ar duino, which has the abilities of auto-acknowledge and auto-retransmit and support up to six channels of data reception
- NRF24L01 Breakout Adapter: Ar duino and Raspberry Pi compatible, Allows for easy connection to Ar duino; Small power on SMD LED indicator; On-board 3.3V voltage regulator accepts your Ar duino +5V supply and provides 3.3V for the attached nRF24L01+ module. nRF24L01+ module may be purchased here: https://www.amazon.com/dp/B00O9O868G
- Widely Application: It can be wildly used to wireless communication between modules, such as wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc
- Package Content: This is an easy-to-use combination product for customers. The packing list includes: 3 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module; 3 * SMA Antenna 2.4G 1100m; 3 * NRF24L01+ Breakout Adapter
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Weight: 0.10 Pounds
See On Amazon #6
20DB Gain Broadband RF Amplifier Low Noise LNA Amplifier 5-3500MHz with Shielding Shell for Remote Control Receiver FM Radio
Asin: B08Y59QX43 | Ean: 9095250176378
【Wide Application】The Low Noise Amplifier Is Widely Used For Short , Fm Radio, Remote Control Receiver, Cable Tv Amplifier, Gps Satellite Navigation, 2.4G Bluetooth And Wifi Receiver Rf Front-End That Need Low Noise Small Rf.
【Specifications】Working Current: 80Ma (5V), Power Supply Voltage: 3.3-6Vdc, System Impedance: 50Ω, Connector: Sma.
【Features】This Rf Amplifier Has A Wide Frequency Range Of 5-3500Mhz, And Large Dynamic Range +20Dbm@1Dbp. It Has Stable Gain 20Db Typical, And Small Noise Figure 1.3Db Typical.
【Advantage】The Rf Amplifier Module Is Especially Suitable For All Kinds Of Radio Frequency Receiving Front-End Circuit To Extend Communication Distance.
Features
- Special Design The broadband low noise RF amplifier is designed with shielding shell, and its shell is made of high quality material which has long service life
- Advantage The rf amplifier module is especially suitable for all kinds of radio frequency receiving front-end circuit to extend communication distance
- Wide Application The low noise amplifier is widely used for short , FM radio, remote control receiver, cable TV amplifier, GPS satellite navigation, 2.4G bluetooth and WIFI receiver RF front-end that need low noise small RF
- Features This RF amplifier has a wide frequency range of 5-3500MHz, and large dynamic range +20dBm@1dBP. It has stable gain 20dB typical, and small noise figure 1.3dB typical
- Specifications Working Current: 80mA (5V), Power Supply Voltage: 3.3-6VDC, System Impedance: 50 , Connector: SMA
- See more on Amazon...
Brand: LiebeWH | Manufacturer: LiebeWH
Dimensions: 0.39 x 3.15 x 1.18 inches | Weight: 0.02 Pounds
See On Amazon #7
Low Noise Amplifier Module, 20dB High Gain LNA Metal 0.1MHz6GHz Full Band RF Amplifier SMA Female Head for Remote Control Receiver for FM Radio (Shipped with Built in Battery)
Asin: B0BGZ1GZBC | Model: LBECpk1h8gi596-11 | PartNumber: LBECpk1h8gi596-11 | Ean: 7614913681541
Bias Power Supply: The Battery-Free Version Requires Bias Tee Bias Power Supply, Some Devices Have A Bias Power Supply Function, For Example: For Sdrplay 1A.
What You Get: 1 Lna + 1 Usb Cable + 24-Hour Customer Email Service + 100% Satisfaction Guarantee + Fast Delivery. If At Any Time You Are Not Satisfied With Our Product, Please Feel Free To Contact Us.
Wide Range Of Applications: Low-Noise Rf Amplifiers Have Excellent Performance, Good Uniformity, And High Reliability. Suitable For Short Wave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Etc.
Stable Performance: The Rf Amplifier Has Ultra-Wide Bandwidth, High Reliability, And Is Not Easy To Corrode And Fall Off. Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable Amplifier Module.
Features
- PROFESSIONAL AMPLIFIER: High linearity, ultra-low noise gain block amplifier. High linearity: +35dBm output IP3; high input power durability, +22dBm continuous wave
- STABLE PERFORMANCE: The RF amplifier has ultra-wide bandwidth, high reliability, and is not easy to corrode and fall off. Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable Amplifier Module
- BIAS POWER SUPPLY: The battery-free version requires Bias Tee bias power supply, some devices have a bias power supply function, for example: for sdrplay 1A
- WIDE RANGE OF APPLICATIONS: Low-noise RF amplifiers have excellent performance, good uniformity, and high reliability. Suitable for short wave, FM radio, remote control receiver, cable TV signal amplifier, etc
- WHAT YOU GET: 1 LNA + 1 USB cable + 24-hour customer email service + 100% satisfaction guarantee + fast delivery. If at any time you are not satisfied with our product, please feel free to contact us
- See more on Amazon...
Brand: LBEC | Manufacturer: LBEC
See On Amazon #8
RF Amplifier High Flatness Amplifier 10M 6GHz 20DB Gain LNA RF Drives Receiver Low Noise Amplifier for FM Radio
Asin: B0C7PGJHJB | Model: WALFRONTcuqgphkzys | PartNumber: WALFRONTcuqgphkzys
Current And Output Interface: High Flatness Amplifier's Current Is Less Than 80Ma And The Output Interface Is Sma Female, Input And Output Impedance Is 50 Ohm..
Wide Use: Low Noise High Flatness Amplifier Can Be Used For Gps Receiver, Receiving System Such As Fm Radio, Receiver, Etc, Electromagnetic Compatibility Receiving System And Software Radio..
Aluminum Alloy: Lna High Flatness Amplifier Is Made Of Aluminum Alloy With Excellent Workmanship And Robust..
High Accuracy Transmission: Lna Low Noise High Flatness Amplifier Covers A Wide Range Of Frequencies And Can Achieve High Accuracy Transmission..
Features
- Frequency Amplification: LNA low noise high flatness amplifier can be used for radio frequency amplification or reception. Gain up to 20DB.
- High Accuracy Transmission: LNA low noise high flatness amplifier covers a wide range of frequencies and can achieve high accuracy transmission.
- Current And Output Interface: High flatness amplifier's current is less than 80ma and the output interface is SMA female, input and output impedance is 50 ohm.
- Aluminum Alloy: LNA high flatness amplifier is made of aluminum alloy with excellent workmanship and robust.
- Wide Use: Low noise high flatness amplifier can be used for GPS receiver, receiving system such as FM radio, receiver, etc, electromagnetic compatibility receiving system and software radio.
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #9
AURSINC 4inch TinySA Ultra Spectrum Analyzer 100kHz-5.3GHz, V0.4.5.1 Portable Frequency Analyzer with 32Gb Card, 2in1 RF Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input (with 25W Attenuator)
Asin: B0BXWW7JQF | Model: ULTRA TinySA 20230309 | PartNumber: ULTRA TinySA 20230309
[Pc Operation] Connected To A Pc Via Usb. The Usb Interface Implements Cdc Protocol And There Is A Large Set Of Commands That Can Be Invoked Over The Serial Interface. These Command Can Be Used To Perform Meas Or Update Internal Settings. Tinysa-App Transfers Data Directly To The Computer. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel.
[Rf Attenuator Specification] Rf Attenuator Dc-3Ghz 25W Coaxial Fixed Attenuator 10Db With N-Male To N-Female Connector. Vswr: ≤ 1.20. Impedance:50 Ohm. Accuracy(Db): ±1.0.
[Features] The Rbw Is As Low As 200Hz, Which Can Effectively Distinguish Adjacent Signals And Meet The Requirements Of Ssb Dual-Satellite Inter-Modulation Test. Input Step Attenuator From 0Db To 31Db (Can Not Be Used Not In Combination With Lna). And, With The New Esd Protection Function, The Product Has A Higher Anti-Static Level And A Longer Service Life.
[What You Get] 1X Tinysa Ultra Spectrum Analyzer(4Inch Touchscreen, 3000Mah Rechargeable Battery); 1X 25W Attenuator; 2X 30Cm Alsr100 Sma Cables; 1 X Usb Type-C Data Cable; 1X Sma-Sma Barrel Connector; 1X Tlanyard And Touch Plectrum; 1X Antenna With Sma Connector; 1X 32Gb Microsd Card(Plugged In The Host), 1X Stylus Pen.
[2 In 1 Device] When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator, Mf/Hf/Vhf Sinus Output Between 100Khz-800Mhz, Uhf Square Wave Output Between 800Mhz-4.4Ghz, Mixing Signal Output Is Between 4.4Ghz-5.4Ghz. Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Inputcalibration. The Tinysa Ultra Contains All The Components Of A Conventional Heterodyne Swept Spectrum Analyzer.
[Frequency Range] Tiny Sa Ultra Measures From 100Khz-5.3Ghz: Spectrum Analyzer For 0.1Mhz-800Mhz, With Ultra Mode Enabled, Level Calibrated Up To 6Ghz, Can Observe Signals Up To 12Ghz. Switchable Resolution Bandpass Filters From 200Hz-850Khz. You Can Fast And Accurate Execute Measurement Tests.
Features
- [Upgraded TinySA Ultra] Tinysa Ultra developed by Hugen, HW V0.4.5.1. With 4inch touch screen(480*320 pixels resolution), tinysa ultra spectrum analyzer has ultra measurement range from 100kHz to 5.3GHz, built-in 32Gb micro SD card for data transfer and storage. Linear power supply to avoid switching noise
- [Frequency Range] Tiny sa ultra measures from 100KHz-5.3GHz: Spectrum Analyzer for 0.1MHz-800MHz, with Ultra mode enabled, level calibrated up to 6GHz, can observe signals up to 12GHz. Switchable resolution bandpass filters from 200Hz-850kHz. You can fast and accurate execute measurement tests
- [PC Operation] Connected to a PC via USB. The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform MEAS or update internal settings. Tinysa-APP transfers data directly to the computer. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel
- [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 100kHZ-800MHz, UHF square wave output between 800mHz-4.4GHz, Mixing signal output is between 4.4GHz-5.4GHz. Built-in calibration signal generator that is used for automatic self test and low inputcalibration. The TinySA ULTRA contains all the components of a conventional heterodyne swept spectrum analyzer
- [Features] The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA). And, with the new ESD protection function, the product has a higher anti-static level and a longer service life
- [What You Get] 1x Tinysa ULTRA Spectrum Analyzer(4inch touchscreen, 3000mah rechargeable battery); 1x 25W Attenuator; 2x 30cm ALSR100 SMA cables; 1 x USB Type-C data cable; 1x SMA-SMA barrel connector; 1x TLanyard and touch plectrum; 1x Antenna with SMA connector; 1x 32GB MicroSD card(plugged in the host), 1x Stylus Pen
- [RF Attenuator Specification] RF Attenuator DC-3GHz 25W Coaxial Fixed Attenuator 10dB with N-male to N-female connector. VSWR: 1.20. Impedance:50 Ohm. Accuracy(dB): 1.0
- See more on Amazon...
Brand: AURSINC | Manufacturer: AURSINC
Weight: 1.98 pounds
See On Amazon #10
5-3500MHz RF WideBand Amplifier 20dB High Gain Low Noise LNA Amplifier with Shielding Shell
Asin: B07PRHL246 | Ean: 0703633904362 | UPC: 703633904362
Main Purpose：It Is Especially Suitable For All Kinds Of Radio Frequency Receiving Front-End Circuit To Extend Communication Distance.
Add Shielding Shell：The Broadband Low Noise Rf Amplifier Is Designed With Shielding Shell.
Great Performance：It Has Stable Gain 20Db Typical, And Small Noise Figure 1.3Db Typical.
Features
- Wide measure frequency This amplifier has a wide frequency range of 5-3500MHz, and large dynamic range +20dBm@1dBP
- Great performance It has stable gain 20dB typical, and small noise figure 1.3dB typical
- Main purpose It is especially suitable for all kinds of radio frequency receiving front-end circuit to extend communication distance
- Add shielding shell The broadband low noise RF amplifier is designed with shielding shell
- See more on Amazon...
Brand: AYMARIO | Manufacturer: AYMARIO
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.02 pounds
See On Amazon #11
30-4000MHz 40dB RF Broad Band Amplifier Module High Gain High Frequency Amplifier Board for FM HF VHF/UHF
Asin: B079Z6FSVQ | Ean: 0663862956313 | UPC: 663862956313
This Amplifier Has A Wide Frequency Range, Fm Hf Vhf/Uhf.
This Rf Broadband Amplifier Module Gain Stability, Is 40Db..
Widely Used In Shortwave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Gps Satellite Navigation..
Suitable For The Fixed Gain Amplification Of Rf Signals.
Features
- The amplifier is 30-4000MHz (40dB) amplifier ,with the characteristic of a large dynamic range
- Suitable for the fixed gain amplification of RF signals
- This amplifier has a wide frequency range, FM HF VHF/UHF
- Widely used in shortwave, FM radio, remote control receiver, cable TV signal amplifier, GPS satellite navigation.
- This RF broadband amplifier module gain stability, is 40dB.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.02 pounds
See On Amazon #12
0.1MHz 6GHz Low Noise Amplifier, 20dB High Gain LNA Amplifier for Shortwave, FM Radio, RF Power Preamplifier Module, SMA Female Connector(Shipped with Built in Battery)
Asin: B0BJ12MDL1
Parameters: Low Noise Amplifier Module1.95Ghz At 20Db High Gain, Input And Output Impedance: 50Ω, Bandwidth: 0.1Mhz‑6Ghz..
Power Supply: Battery Less Version Needs Bias Tee Bias Power Supply, Some Devices Come With Bias Power Supply Function Such As: For Sdrplay 1A..
Applicable: Rf Amplifier Has Excellent Performance, Excellent Uniformity And High Reliability. It Is Suitable For Shortwave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Etc..
Stable Performance: Rf Amplifier Ultra Bandwidth, High Reliability, Not Easy To And Fall Off. Amplifier Module With Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable..
Features
- Professional: High linearity,ultra low noise gain block amplifier. High linearity: +35dBm output IP3; high input power ruggedness, +22dBm continuous wave.
- Stable Performance: RF amplifier ultra bandwidth, high reliability, not easy to and fall off. Amplifier module with wide frequency range, high gain, low noise figure, unconditionally stable.
- Parameters: Low noise amplifier module1.95GHz at 20dB high gain, input and output impedance: 50 , bandwidth: 0.1MHz 6GHz.
- Applicable: RF amplifier has excellent performance, excellent uniformity and high reliability. It is suitable for shortwave, FM radio, remote control receiver, cable TV signal amplifier, etc.
- Power Supply: Battery less version needs Bias Tee bias power supply, some devices come with bias power supply function such as: for sdrplay 1A.
- See more on Amazon...
Brand: FOSA | Manufacturer: fosa
See On Amazon #13
Teyleten Robot 0.1-2000MHz RF Wideband Amplifier Broadband Module Receiver Gain 30dB Low-Noise LNA
Asin: B08THYZWNQ | Model: Small47 | PartNumber: Small47 | Ean: 6438112296785
Maximum Power Output+13Dbm 20Mw.
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.31 x 1.32 x 0.97 inches
See On Amazon #14
Vega Barebones - Ultra Low-Noise Variable Gain Amplifier (VGA) Module for RF & Software Defined Radio (SDR). Highly Linear & Wideband 30MHz-4000MHz Frequency Capability w/Bias Tee & USB Power Options
Asin: B08LNYKHSM | Model: VeGA Barebones | PartNumber: VeGA Barebones
Dual Amplifier Design With Adjustable Gain (20Db-50Db At 100Mhz), Low Noise Figure And Low Power Consumption. Can Be Powered Through Bias Tee (3.3V-5V), Usb, Or Dc Power.
Made In North America. Full 1 Year Warranty!.
The Attenuation Can Be Controlled Either With The On-Board Potentiometer (Analog Control) Or Push Button Array (Digital Control).
Features
- A wideband (30MHz-4000MHz), high-performance, general purpose LNA module with a built-in variable attenuator to maximize usability and portability
- The attenuation can be controlled either with the on-board potentiometer (analog control) or push button array (digital control)
- Dual amplifier design with adjustable gain (20dB-50dB at 100MHz), low noise figure and low power consumption. Can be powered through bias tee (3.3V-5V), USB, or DC power
- Made in North America. Full 1 year warranty!
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.79 x 3.15 x 2.36 inches | Weight: 24.00 Grams
See On Amazon #15
Low Noise Amplifier, 20dB High Gain LNA RF Power Preamplifier Module 0.1MHz to 6GHz Full Band Low Noise Amplifier Professional Low Noise Amplifier Module Board (Shipped Without Battery)
Asin: B0BVG452R3 | Model: Pomya98pitze4by-12 | PartNumber: Pomya98pitze4by-12
Stable Performance: Rf Amplifier Ultra Bandwidth, High Reliability, Not Easy To And Fall Off. Amplifier Module With Wide Frequency Range, High Gain, Low Noise Figure, Unconditionally Stable..
Power Supply: Battery Less Version Needs Bias Tee Bias Power Supply, Some Devices Come With Bias Power Supply Function Such As: For Sdrplay 1A..
Applicable: Rf Amplifier Has Excellent Performance, Excellent Uniformity And High Reliability. It Is Suitable For Shortwave, Fm Radio, Remote Control Receiver, Cable Tv Signal Amplifier, Etc..
Parameters: Low Noise Amplifier Module1.95Ghz At 20Db High Gain, Input And Output Impedance: 50Ω, Bandwidth: 0.1Mhz‑6Ghz..
Features
- Professional: High linearity,ultra low noise gain block amplifier. High linearity: +35dBm output IP3; high input power ruggedness, +22dBm continuous wave.
- Parameters: Low noise amplifier module1.95GHz at 20dB high gain, input and output impedance: 50 , bandwidth: 0.1MHz 6GHz.
- Stable Performance: RF amplifier ultra bandwidth, high reliability, not easy to and fall off. Amplifier module with wide frequency range, high gain, low noise figure, unconditionally stable.
- Applicable: RF amplifier has excellent performance, excellent uniformity and high reliability. It is suitable for shortwave, FM radio, remote control receiver, cable TV signal amplifier, etc.
- Power Supply: Battery less version needs Bias Tee bias power supply, some devices come with bias power supply function such as: for sdrplay 1A.
- See more on Amazon...
Brand: Pomya | Manufacturer: Pomya
See On Amazon #16
Nooelec Lana Barebones - Ultra Low-Noise Amplifier (LNA) Module for RF & Software Defined Radio (SDR). Wideband and Linear 20MHz-4000MHz Frequency Capability with Bias Tee & USB Power Options
Asin: B07XNH6QW6 | Model: LaNA Barebones | PartNumber: LaNA Barebones | Ean: 0616469146489 | UPC: 616469146489
Can Be Powered Through Bias Tee (3.3V-5V), Usb, Or Dc Power.
Made In North America. 1 Year Warranty! A Retail Version With Aluminum Enclosure Is Also Available, See Amazon Product Id B07xnlj9x2.
Higher Gain, Lower Noise Figure, Lower Power Consumption And Better Linearity Than Modules Based On Spf5189z And Similar Lna Mmics.
Features
- A wideband (20MHz - 4GHz), high-performance, general purpose LNA module available at an extremely competitive price
- Higher gain, lower noise figure, lower power consumption and better linearity than modules based on SPF5189Z and similar LNA MMICs
- Can be powered through bias tee (3.3V-5V), USB, or DC power
- Made in North America. 1 year warranty! A retail version with aluminum enclosure is also available, see Amazon product ID B07XNLJ9X2
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.39 x 2.76 x 0.79 inches | Weight: 0.03 pounds
See On Amazon #17
PAMEENCOS 2pcs 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Amplifier LNA Development Board
Asin: B0CNQXBJBQ | Ean: 9115433152736
Output Power: P1db>13Dbm, Supply Voltage: 9-12V, Operating Current: About 30-40Ma.
A Perfect Match Various Circuits As Ideal Amplifier Buffer Amplifiers.
35.8Db@100Mhz, 35.8Db@300Mhz, 35.6Db@500Mhz, 32.6Db@1000Mhz, 26.4Db@1500Mhz, 19.6Db@2000Mhz.
Frequency: 1-2000Mhz, Gain: Gp>30Db, Noise Figure: 2Db @500Mhz.
Features
- Maximum output power 12dBm (P1dB) (1-2000MHz) (if the post-stage has low-pass links, it can even reach 18dBm)
- Frequency: 1-2000MHz, Gain: Gp>30dB, Noise figure: 2dB @500MHz
- Output power: P1db>13dBm, Supply voltage: 9-12V, Operating current: about 30-40mA
- 35.8dB@100MHz, 35.8dB@300MHz, 35.6dB@500MHz, 32.6dB@1000MHz, 26.4dB@1500MHz, 19.6dB@2000MHz
- A perfect match various circuits as ideal amplifier buffer amplifiers
- See more on Amazon...
Brand: PAMEENCOS | Manufacturer: PAMEENCOS
See On Amazon #18
RF Amplifier Low Noise Broadband Amplifier 20M - 6GHZ Broadband Gain 30dB LNA Electric Components
Asin: B0CDYY72FX | Model: WALFRONTvmdhacuopx | PartNumber: WALFRONTvmdhacuopx
20M-6Ghz Frequency Range -- The Working Frequency Range Is 20M-6Ghz Which Can Provide Stable Performance.
High Operating Efficiency -- Maximum Output Power Is +17Dbm, It Has High Operating Efficiency.
Power Gain -- Typical Value 30Db At 3G; 21Db At 6Ghz(Different Frequency Gains Are Slightly Different).
Easily Install Remove -- Working With 5V Power Supply, It Has Good Stability. Small Body, Easy To Install And Remove.
Features
- High Gain Low Noise -- The module has a higher gain and provides very low noise over a wide frequency range
- Easily Install Remove -- Working with 5V power supply, it has good stability. Small body, easy to install and remove
- 20M-6Ghz Frequency Range -- The working frequency range is 20M-6Ghz which can provide stable performance
- Power Gain -- Typical Value 30dB at 3G; 21dB at 6GHz(different frequency gains are slightly different)
- High Operating Efficiency -- Maximum output power is +17dBm, it has high operating efficiency
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon #19
Ultra Low Noise Amplification, High Gain LNA Amplifier 20dB, Full Band Low Power Amplifier 100k-6GHz with Bias Tee Power Supply for SDRplay 1A
Asin: B0CM38G9N9 | Model: ciciglow1ge8kp9t56 | PartNumber: ciciglow1ge8kp9t56
[High Linearity]: The Full Band Amplifier Has High Linear +35 Dbm Output Ip3, High Input Power Robustness, +22 Dbm Continuous Wave..
[Practical And Reliable]: The Full Band Amplifier Is Versatile And Ideal For Demanding Applications Where Low Noise And High Gain..
[Bias Tee Power Supply]: No Batteries Required, Bias Tee Bias Powered, Some Devices Come With Bias Powered Feature, Such As For Sdrplay 1A..
[High Gain]: The Low Noise Amplifier Modul Has An Ultra Low Noise Figure, 0.4 Db Nf At 1.95 Ghz, High Gain At 1.95 Ghz, And 20 Db Gain..
Features
- [Ultra Low Noise Amplification]: The low noise amplifier module provides ultra low noise coefficient, with working frequency range of 100K to 6GHz.
- [High Gain]: The low noise amplifier modul has an ultra low noise figure, 0.4 dB NF at 1.95 GHz, high gain at 1.95 GHz, and 20 dB gain.
- [High Linearity]: The full band amplifier has high linear +35 dBm output IP3, high input power robustness, +22 dBm continuous wave.
- [Bias Tee Power Supply]: No batteries required, Bias Tee bias powered, some devices come with bias powered feature, such as for sdrplay 1A.
- [Practical and Reliable]: The full band amplifier is versatile and ideal for demanding applications where low noise and high gain.
- See more on Amazon...
Brand: ciciglow | Manufacturer: ciciglow
See On Amazon #20
YWBL-WH LNA 5-3500MHz RF Amplifier,20dB Gain Broadband Low Noise RF Amplifier with Shielding Shell, Rf and Microwave Amplifiers
Asin: B07SN4D4CF | Model: YWBL WH | PartNumber: YWBL WH | Ean: 0712979133916 | UPC: 712979133916
20Db Typical Gain: The Rf Amplifier Has A Stable 20Db Typical Gain With A Typical Noise Figure Of 1.3Db..
Dseign: Broadband Low-Noise Rf Amplifiers Are Designed With A Shielded Housing..
Advantages: The Rf Amplifier Has The Advantages Of A Wide Frequency Range Of 5-3500Mhz, And Large Dynamic Range +20Dbm@1Dbp..
Working Objectives: The Rf Amplifier Is Widely Used For Short , Fm Radio, Remote Control Receiver, Cable Tv Amplifier, Gps Satellite Navigation, 2.4G Bluetooth And Wifi Receiver Rf Front-End That Need Low Noise Small Rf To Be Amplified..
Features
- COMMUNICATION DISTANCE INCREASING: The RF amplifier can be used for various RF receiving front ends to increase the communication distance.
- WORKING OBJECTIVES: The RF amplifier is widely used for short , FM radio, remote control receiver, cable TV amplifier, GPS satellite navigation, 2.4G bluetooth and WIFI receiver RF front-end that need low noise small RF to be amplified.
- 20dB TYPICAL GAIN: The RF amplifier has a stable 20dB typical gain with a typical noise figure of 1.3dB.
- ADVANTAGES: The RF amplifier has the advantages of a wide frequency range of 5-3500MHz, and large dynamic range +20dBm@1dBP.
- DSEIGN: Broadband low-noise RF amplifiers are designed with a shielded housing.
- See more on Amazon...
Brand: YWBL-WH | Manufacturer: YWBL-WH
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.02 pounds
See On Amazon
Looking For Something Else?
Search