HzdaDeve Hotend Hot End Print Head Extruder Kit with 2PK Heater Block Cover and 2PK Stainless Steel Hardened Nozzles for Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max 3D Printer
Asin: B0CLNGYS3C
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Simple Installation: Remove The Old Hot End And Install The New Hotend To Start. (Heating Tube, Thermistor, Nozzle Etc Are Pre-Installed).
High Speed: It's A Special Volcano Design So The Print Head Heats Evenly. The Interior Of The Nozzle Is Smooth Without Burry, Which Not Only Reduces Air Resistance And Prevents The Filament From Jamming, But Supports High-Speed Printing..
Filament Material: The Print Head For Kobra 2 Pro Works With 1.75 Mm Pla/Abs/Petg/Tpu/Wood Filament..
Package Included: 2Pcs Silicone Cover + 1Pc Hardened Nozzle + 1Pc Brass Nozzle + 1 Set Hotend Kit (Heater Cartridge, Thermistor, Heat Block,Throat Tube, Nozzle).
Features
- Notice: This hotend kit replacement is only compatible with Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max FDM 3D printer.
- Package Included: 2PCS silicone cover + 1PC Hardened Nozzle + 1PC Brass Nozzle + 1 set hotend kit (heater cartridge, thermistor, heat block,throat tube, nozzle)
- Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
- Filament material: The print head for Kobra 2 Pro works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
- High Speed: It's a special volcano design so the print head heats evenly. The interior of the nozzle is smooth without burry, which not only reduces air resistance and prevents the filament from jamming, but supports high-speed printing.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve hotend kit replacement for Anycubic Kobra 2 Pro
See On Amazon Similar To HzdaDeve Hotend Hot End Print
#1
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #2
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #3
HzdaDeve Hotend for A1 Mini/A1 Print Head Upgrade High-Temperature 0.4MM Hardened Steel Nozzle Hot End Kit Extruder Replacement with 2PCS Silicone Cover Sock for Bambu Lab 3D Printer Accessories
Asin: B0CTCMLK9R | Model: hotend nozzle | PartNumber: hotend nozzle
Premium Nozzle Quality: It's Made Of A High-Quality Chrome-Plated Brass Heating Block Which Ensures Heat Resistance, Wear Resistance, And Corrosion Resistance..
Simple Installation: Remove The Old Hot End And Install The New Hotend To Start..
Filament Material: The Print Head For A1 Mini Works With 1.75 Mm Pla/Abs/Petg/Tpu/Wood Filament..
Package Included: 1 Set Hotend Kit And Extra 2Pcs Silicone Sock..
Features
- Notice: This hotend kit replacement is only compatible with A1 Mini and A1 3D printer.
- Package Included: 1 set hotend kit and extra 2pcs silicone sock.
- Premium Nozzle Quality: It's made of a high-quality Chrome-plated brass heating block which ensures heat resistance, wear resistance, and corrosion resistance.
- Filament material: The print head for A1 Mini works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
- Simple Installation: Remove the old hot end and install the new hotend to start.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve hotend for A1 Mini
See On Amazon #4
5Aplusreprap Ender 3 Hotend Upgrade - M3 Stud Thermistor,Fast Replaced, Compatible for Creality Ender 3 V2/Pro,CR-10 J-Head Hotend Replacement, Assembled Extruder 3D Printer Hot end Kit 24V 40W
Asin: B09QMBMB6S | Model: HTK-24V50W-1set | PartNumber: HTK-24V50W-1set
Advantages: Heater Wire And Thermistor Wire Are With Fast Replace Plug Connectors,Easier To Fast Replace Or Remove The Hotend In Any Cases. Heated Block Was Staby To The Heatsink With The Titanium Alloy Screw,Which Thermal Conductivity Is Lower Than Stainless Steel Screw, Therefore Less Heat Is Conducted To The Heat Sink..
Tips: It Is Suggested To Re-Check The Heatbed Level After Install The New Hotend Or Nozzle, To Avoid The Nozzle Scratch Heatbed. Screw This Termistor In The Heated Block By Hand, Not By Tool..
Compatible With 3D Printer Models: Creality Cr-10, Creality Cr-10-S5, Creality Cr-10-S4, Creality Cr-10S, Creality Cr-10 Mini, Creality Cr-20, Creality Cr-20 Pro, Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, Xy X5s, Tevo Tornado, Alfawise U20, Lotmaxx Sc-10, Etc..
Staby Temperature Sensor: Different From Other Hotends, This Hotend Uses An Upgraded M3 Stud Ntc 100K Thermistor, Which Better Keeps The Thermistor Firmly Fixed To The Heated Block While Printhead Is Moving. Thermistor Was Sealed With High Temperature Glue And Insulation With Fiberglass, To Ensure More Effective Temperature Resistance To Prevent Short Circuit At 250℃ Temperature..
Features
- Package Includes: 1 x Ender 3 Hotend, CR10 J-head Hotend kit with M3 stud-in NTC 3950 100K Thermistor and 24v 40w heater wire, 5 x 0.4mm brass nozzle, 3 x ender heated block silicone case, 2 x aluminum heated block, 1 x wrench tool.
- Staby Temperature Sensor: Different from other hotends, this hotend uses an upgraded M3 stud NTC 100K thermistor, which better keeps the thermistor firmly fixed to the heated block while printhead is moving. Thermistor was sealed with high temperature glue and insulation with fiberglass, to ensure more effective temperature resistance to prevent short circuit at 250 temperature.
- Advantages: Heater wire and thermistor wire are with fast replace plug connectors,easier to fast replace or remove the hotend in any cases. Heated block was staby to the heatsink with the titanium alloy screw,which thermal conductivity is lower than stainless steel screw, therefore less heat is conducted to the heat sink.
- Compatible with 3D Printer Models: Creality CR-10, Creality CR-10-S5, Creality CR-10-S4, Creality CR-10S, Creality CR-10 MINI, Creality CR-20, Creality CR-20 Pro, Ender 2, Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5, XY X5S, Tevo Tornado, Alfawise U20, Lotmaxx SC-10, etc.
- Tips: It is suggested to re-check the heatbed level after install the new hotend or nozzle, to avoid the nozzle scratch heatbed. Screw this termistor in the heated block by hand, not by tool.
- See more on Amazon...
Brand: SAPLUSREPRAP | Manufacturer: 5Aplusreprap
Dimensions: 1.20 x 3.50 x 5.20 inches | Weight: 0.28 pounds
See On Amazon #5
Creality Ender 5 Plus Hotend Replacement, Ender 5 Pro Hotend, Ender 5 Plus Hot End Assembled 24V with Aluminum Heating Block 0.4mm Nozzle for 3D Printer Ender-5 Plus, Ender 5 Pro, Ender 5-1.4M Wire
Asin: B0C5CKHVY7
This Creality Ender 5 Hot End Replaced The Original Perfectly, The Hot End Was Easy To Get Operational With Minimum Soldering..
Superior Performance: With High Quality Teflon Tube, Reduce Clogging, Smooth Filament Feeding, Rapid Heating, Precise Temperature Contral..
Seamless Connected Between Nozzle And Throat, Upgraded Interior Design, No More Clogging With Long Time Printing..
Ender 5 Plus Hot End, White Wire Was Temperature Thermistor, Red Wire Was Heating Tube 24V 40W..
Features
- Compatible with Creality ender 5 plus 3d printer. Operating temperature range: -40 ~ +260 C (-40 ~ +500 F)
- ender 5 plus hot end, white wire was temperature thermistor, red wire was heating tube 24V 40W.
- This creality ender 5 hot end replaced the original perfectly, the hot end was easy to get operational with minimum soldering.
- Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.
- Superior performance: With high quality teflon tube, reduce clogging, smooth filament feeding, rapid heating, precise temperature contral.
- See more on Amazon...
Brand: CHPOWER | Manufacturer: CHPOWER
See On Amazon #6
Creality Original Ender 5 Hotend Kit for 24V Ender-5 3D Printer Extruder Head with Silicone Cover Aluminum Heat Block Assembled
Asin: B07WRKJG9N | Ean: 0705300791480 | UPC: 705300791480
Operating Temperature Range： -40 ~ +260°C (-40 ~ +500 °F).
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Red Wire Was Heating Tube 24V 40W..
Suitable For Creality Ender 5 3D Printer..
Features
- It's 100% Creality Original.
- Suitable for Creality Ender 5 3d printer.
- Operating temperature range -40 ~ +260 C (-40 ~ +500 F)
- MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 24V 40W.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #7
Creality Ender 5 S1 Extruder Hotend Kit Replacement High Temperature High Speed Complete Nozzle Hot End Kit
Asin: B0BXDDGMKZ | Model: ENO-CR-Ender5S1-Hotend | PartNumber: ENO-CR-Ender5S1-Hotend
【Corrugated Heatsink】2.5 Times Surface Area That Is Rapidly Air-Cooled By A Silent Axial Flow Fan..
Easy To Install！.
【Large Melting Chamber】50Mm³ Melting Chamber Surrounded By A Large 4000Mm³ Heater Block. It Fully Melts The Filament For Smooth Feeding..
【Titanium Alloy Heatbreak】Low Thermal Conductivity For Blocking Heat Creep. Able To Tame Up To 300℃..
Features
- Official Creality Ender 5 S1 Stock Hotend Kit Clog-free hot end for High-temp High-Speed Printing!
- Titanium Alloy Heatbreak Low thermal conductivity for blocking heat creep. Able to tame up to 300 .
- Corrugated Heatsink 2.5 times surface area that is rapidly air-cooled by a silent axial flow fan.
- Large Melting Chamber 50mm melting chamber surrounded by a large 4000mm heater block. It fully melts the filament for smooth feeding.
- Easy to Install
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #8
Metal Hotend 3D Printer Nozzles 3 Pcs 3D Printer Hotend Kit Metal Hotend Kit 3D Assembled Extruder Compatible with CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers
Asin: B09LCKKZDW | Model: Flutesan-Hotend Kit-07 | PartNumber: Flutesan-Hotend Kit-07
Consistent Output: Following The Manufacturing Standards, This Metal Hotend Can Effectively Reduce The Risks Of Clogging And Uneven Extrusion, Providing Consistent Outputs And Avoiding Frequent Replacement Of Ptfe Tubes, Thereby Reducing Maintenance Workload.
Note: The Metal Hotend Extruder Kit Does Not Contain Heating Elements, But We Do Reserve Installation Positions For The Heating Elements, So You Can Configure Heating Elements With Different Powers According To Your Actual Needs.
Universal Compatibility: This 3D Assembled Metal Hotend Kit Is Compatible With Most Series Of Creality Ender And Cr Printers; And It Is Preassembled, Which Makes It Easy For You To Install.
Reliable Quality: Made Of Quality Metal Materials, This Metal Hotend Kit Is Safe And Reliable, Which Can Withstand Higher Temperatures, Allowing You To Print Filaments With High Temperature Requirements At Will After Replacement, Such As Abs, Nylon, Polycarbonate And More.
Features
- High precision: this 3D printer hotend kit adopts a quality cooling system, the aluminum shell anodized frosted surface makes it more sturdy and wear resistant, which can serve you for a long time; And the integrated structure allows you to disassemble, repair and assemble it easily
- Reliable quality: made of quality metal materials, this metal hotend kit is safe and reliable, which can withstand higher temperatures, allowing you to print filaments with high temperature requirements at will after replacement, such as ABS, nylon, polycarbonate and more
- Consistent output: following the manufacturing standards, this metal hotend can effectively reduce the risks of clogging and uneven extrusion, providing consistent outputs and avoiding frequent replacement of PTFE tubes, thereby reducing maintenance workload
- Universal compatibility: this 3D assembled metal hotend kit is compatible with most series of Creality Ender and CR printers; And it is preassembled, which makes it easy for you to install
- Note: the metal hotend extruder kit does not contain heating elements, but we do reserve installation positions for the heating elements, so you can configure heating elements with different powers according to your actual needs
- See more on Amazon...
Brand: Flutesan | Manufacturer: Flutesan
See On Amazon #9
HzdaDeve Hotend for Elegoo Neptune 3 Pro Hot End Kit for Neptune 3 Plus/Max Extruder Head Heater Break Silicone Cover Thermistor with Extra 4PCS Nozzles for 3D Printer Accessories Parts
Asin: B0CCNXDPQD
Plug And Play: Remove The Old Sprite Exturder And Install The New Hot End To Start. (3D Accessories Are Pre-Installed).
Nozzle And Hot Block: The Seamless Connection Between The Nozzle And Heat Breakage Accelerates The Nozzle To Dissipate Heat, And The Heat Breakage To Insulate, And Releases The Nozzle Blockage..
Filament Material: The Print Head For Printer Works With 1.75 Mm Pla/Abs/Petg/Tpu/Wood Filament..
Package Included: 1 Set Hot End Replacement And Extra 4Pcs Nozzles..
Features
- Notice: This hotend kit is only compatible with ELEGOO Neptune 3 Pro/Neptune 3 Plus/Neptune 3 Max 3D FDM printer.
- Package Included: 1 set hot end replacement and Extra 4PCS nozzles.
- Plug and Play: Remove the old sprite exturder and install the new hot end to start. (3D accessories are pre-installed)
- Filament material: The print head for printer works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
- Nozzle and hot block: The seamless connection between the nozzle and heat breakage accelerates the nozzle to dissipate heat, and the heat breakage to insulate, and releases the nozzle blockage.
- See more on Amazon...
Brand: HzdaDeve | Manufacturer: HzdaDeve hotend for Elegoo Neptune 3 Pro
See On Amazon
Looking For Something Else?
Search