FYSETC 3D Printer Part Elego Neptune3 Pro Belts Replacement: XY Synchronous Belt Kit Open Timing Rubber 2GT Timing Width 6mm Y axis 754mm + X axis 770mm with Extra Copper Buckles Easy Install
Asin: B0CLS483LF
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.High Quality Material: Genuine 2Gt Timing Belt 6Mm, Made Of Pu Material, Non-Slip, Soft And Durable, High Wear Resistance And Good Crack Resistance, Long Anti-Wear Life..
Package Include: X Y Synchronous Timing Belt Pre-Pressed With Copper Sleeves On Each End, Come With Extra Crimping Copper Buckles..
Stable Operation And Low Noise:High Speed Transmission Cache More Stable, With Buffer, Shock Absorption, Low Noise. Accurate Transmission, High Precision Seamless Matching Synchronization Wheel..
Easy Installation: Drop-In 3D Printer Replacement Part, Very Easy To Install. When Replacing The Timing Belt, The Belt Tension Of Tensioner Must Be Reduced To A Minimum Before It Can Be Removed. Remove The Old Stock From Belt Plate And Assemble The New. Good Work With The Pulleys Provides Perfect And Precise Linear Function For Your Machine. Due To The Belt Is A Consumable Part Of 3D Printer, Regular Replacement Will Make Your Printing Result Better..
Features
- A must-have 3d printer accessory: Drop-in replacement XY axis synchronous belt kit compatible with FDM 3d printer Elego Neptune3 Pro motion accessory. Comparison helps identify: the Long one 770mm is for X axis, Short 754mm for Y. We also have another X Y axis open timing belt for ELEGO Neptune3 Plus, please search Asin:B0CLVNNMM2 at our store. Not for Neptune4, Neptune4 Pro.
- Easy Installation: Drop-in 3d printer replacement part, very easy to install. When replacing the timing belt, the belt tension of tensioner must be reduced to a minimum before it can be removed. Remove the old stock from belt plate and assemble the new. Good work with the pulleys provides perfect and precise linear function for your machine. Due to the belt is a consumable part of 3d printer, regular replacement will make your printing result better.
- High Quality Material: Genuine 2Gt timing belt 6mm, made of PU material, Non-slip, soft and durable, high wear resistance and good crack resistance, long anti-wear life.
- Stable Operation and Low Noise:High speed transmission cache more stable, with buffer, shock absorption, low noise. Accurate transmission, high precision seamless matching synchronization wheel.
- Package Include: X Y synchronous timing belt pre-pressed with copper sleeves on each end, come with extra crimping copper buckles.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon Similar To FYSETC 3D Printer Part Elego
#1
FYSETC 3D Printer Accessories - Spriite Extruder Hotend Replacement Parts - Aluminum Heatsink: Clone Fast Cooling Block Fit Crealiity Ender 3 S1 Pro CR10 Smart Sermon V1 Original Heat Sink
Asin: B0CP3RX5GT
Package Include: 1Pcs Extruder Heating Controller + 2Pcs Grub Screws As Original Replacement. Special Designed, Has Many Fins To Provide Lots Of Surface Area For Dissipation Of The Heat, And Precise Hexagon Socket Screw Hole Placement. If You Need Spriite Heat Block Thermistor Heater Cartridge 3010 4010 Fan Cooling Or Silicone Sock Breakout Adapter Board Dual Gear Drive, Please Enter Our Shop..
Material: Aluminum. Large Solid Heat Sink, Greater Heat Transfer And Fast Cooling, The Surface Of The Heat Sink Is Not Easy To Be Scratched, The Fins Are Not Easy To Bend..
3D Printing Part: Exact Replacement For Heat Sink, Do A Great Job At Reducing Hotend Temperature. Installation Is Super Easy, Drop-In Replacement Your Broken Stock Spriite Extruder Cooling Part. Perfect Solution To The Hot Running Extruder..
Fit Fdm 3D Project: Ender-3 S1 - Ender-3 S1 Pro - Ender-3 S1 Plus - Cr-10 Smart Pro - Sermoon V1 - Sermoon V1 Pro. But Not Fit E3 Style: B1 Se Plus, Neptune3 Plus Or Voxlabb Printer..
Features
- A very necessary spare machine part for the regular Spriite direct drive extruder: metal cooler aluminum block, can directly replace the stock one when broken. Based on customer's need, specially add new heater block mounting screws when your stocks were stripped, small hex screw(grub screw) that locks the heating element to use on the replacement. If need the Upgraded Integrated Gear kit for better 3d printing material extrusion, please search Asin: B0CXDF85MM at our store.
- Fit FDM 3D project: Ender-3 S1 - Ender-3 S1 Pro - Ender-3 S1 Plus - CR-10 Smart Pro - Sermoon V1 - Sermoon V1 Pro. But not fit E3 style: B1 SE Plus, Neptune3 Plus or Voxlabb printer.
- Package include: 1Pcs Extruder Heating Controller + 2Pcs grub screws as original replacement. Special designed, has many fins to provide lots of surface area for dissipation of the heat, and Precise hexagon socket screw hole placement. If you need spriite heat block thermistor heater cartridge 3010 4010 fan cooling or silicone sock breakout adapter board Dual gear drive, please enter our shop.
- 3D Printing part: Exact replacement for heat sink, do a great job at reducing hotend temperature. Installation is super easy, drop-in replacement your broken stock spriite extruder cooling part. Perfect solution to the hot running extruder.
- Material: aluminum. large solid heat sink, greater heat transfer and fast cooling, the surface of the heat sink is not easy to be scratched, the fins are not easy to bend.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
Dimensions: 1.65 x 0.55 x 0.82 inches | Weight: 0.04 pounds
See On Amazon #2
FYSETC 3D Printer Parts Ender 3 Stepper Motor Cable X Y Z Axis Stepper Motor and Limited Switch Endstop Cable for Ender 3/ Ender 3 Pro/Ender 3X-3Pcs
Asin: B08BJXW1MK
One-Piece Plug Design, Easy To Install, Hard To Snap, Convenient To Plug Or Release..
After-Sales Guarantee: Each One Defective Item Can Have The Free Replace Or Refund, If Need Further Please Fell Free To Email Or Qa Us, We And Our Engineers Are Very Happy To Assist You..
Packaging Includes：1 X X/E Axis Cable,1 X Y Axis Cable,1 X Z Axis Cable,.
Total Cable Length：X/E Axis: About 790Mm/31Inch(The Longest Terminal About 900Mm/35.4Inch),Y Axis:About 400Mm/15.7Inch, Z Axis: About 300Mm/11.8Inch..
Features
- Ender 3 stepper motor cable, Compatible with Ender 3 / Ender 3 Pro/Ender 3X Printer Limit Switch
- Total cable length X/E Axis: about 790mm/31inch(the longest terminal about 900mm/35.4inch),Y Axis:about 400mm/15.7inch, Z Axis: about 300mm/11.8inch.
- One-piece plug design, easy to install, hard to snap, convenient to plug or release.
- Packaging includes 1 x X/E Axis Cable,1 x Y Axis Cable,1 x Z Axis Cable,
- After-sales Guarantee: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Weight: 0.22 pounds
See On Amazon #3
FYSETC Prus i3 Hotend MK3S+ J-Head Extruder Kit 24V 40W for 1.75mm Direct Filament Compatible with Prus i3 MK3/MK3S/MK3S+ and Other E3 V6 Remote Printhead Printer with Silicon Cover and 0.4mm Nozzle
Asin: B0BL3G7T6D
Kit Includes: A Semi-Assembled Part( V6 All Metal Heatsink+ Bimetal Throat+ High Quality Brass Nozzle+ Aluminum V6 Heater Block) X High Temperature Protective Silicone Cover X 24V 40W Cartridge Heater X Specific 104Nt Thermistor X Extra V6 Stainless Steel Throat..
High Quality: Semi-Assembled Hotend Adopts Copper- Titanum Alloy All-Metal Throat, Can Be Applied To High Temperature Filament Printing; The Quality Cnc Heating Block With Good Thermal Conductivity And High Precision..
Upgrade Heater Thermistor: 24V 40W Cartridge Heater Is Made Of 304 Stainless Steel Material,Diameter: 6Mm; Length:15Mm, Conveniently Pre-Wired With 1 Meter Long High Temperature Resistant Wire; Specific 104Nt Thermistor With Cable 1Meter Long, Much More Accurate And Stable Than The Original. Temperature Measurement Head Cylinder Diameter 3Mm, Length 12Mm, Can Be Used With The Heating Block That Support The Thermocouple..
Easy To Install: Comes With A Full Set, And Semi-Assembled, Need You To Complete The Assembly Then A Drop In All Metal Conversion Kit For Your Printer. Note: After Installing, Heat The Printhead To About 150 Degrees/302℉, Then Tighten The Nozzle With A Wrench To Avoid 3D Printing Material Oozing. 0.2Mm Distance Between 0.4 Brass Nozzle And Heater Block Will Be Ok..
Features
- Fits: A Good hotend replacement or 3D printer accessory for DIY Prus i3 MK3/MK3S/MK3S+ model or other machines with E3 V6 Remote Extruder. Not fit for Mk2(MK2 uses 12V).
- Easy to install: comes with a full set, and semi-assembled, need you to complete the assembly then a Drop in All Metal Conversion Kit for your printer. Note: After installing, Heat the printhead to about 150 degrees/302 , then tighten the nozzle with a wrench to avoid 3d printing material oozing. 0.2mm distance between 0.4 brass nozzle and heater block will be OK.
- Kit includes: A semi-assembled part( V6 All metal heatsink+ Bimetal Throat+ High quality brass nozzle+ Aluminum V6 Heater Block) x high temperature protective silicone cover x 24V 40W cartridge heater x specific 104NT thermistor x extra V6 stainless steel throat.
- Upgrade Heater Thermistor: 24v 40W cartridge Heater is made of 304 stainless steel material,Diameter: 6mm; Length:15mm, Conveniently pre-wired with 1 meter long high temperature resistant wire; specific 104nt thermistor with cable 1meter long, Much more Accurate and Stable than the original. Temperature measurement head cylinder diameter 3mm, length 12mm, can be used with the heating block that support the thermocouple.
- High Quality: Semi-assembled hotend adopts copper- titanum alloy all-metal throat, can be applied to high temperature filament printing; the quality CNC heating block with good thermal conductivity and high precision.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #4
FYSETC 3D Printer Ender 3 S1 Pro Ender 5 Plus Heat Bed Leveling Part Silicone Solid Mounts Column OD 0.63in ID 0.16in Stable Hot Bed Tool Heat-Resistant for Ender 5/ Pro A8 Wanhao D9 Meg- Pack of 4
Asin: B07MKQGQJW
This Heat-Resistant And Pressure-Resistant Silicone Leveling Column With A 4Mm Inner Diameter Makes It Better To Level Your 3D Printer..
After Sales Guarantee: Each One Desfective Item Can Have The Free Replace Or Refund, Need More Help Please Feel Free To Email Or Q&A Us, We Will Try Our Best To Service You..
The Silicone Buffers Are Simply Installed Instead Of The Original Spring And It Is No Longer Possible Movement, Your Set Levels Remain!.
New Upgraded 3D Printing Leveling Tool, Special Design For Ender 3 S1 Pro/Anet A8 Wanhao D9 Anycubic Mega I3 And Most Heated Bed.(Not Suitable For Ender 3 And Cr10, If You Need Ender 3 And Cr10, Please Search Asin:B07mh4jqb8).
Features
- For 3D Printer Hot Bed/ Platform, bottom connect, can replace original spring leveling.
- New upgraded 3d printing leveling tool, Special design for Ender 3 s1 pro/Anet A8 Wanhao D9 Anycubic Mega i3 and most heated bed.(Not suitable for ENDER 3 and CR10, if you need ENDER 3 and CR10, please search ASIN:B07MH4JQB8)
- This heat-resistant and pressure-resistant silicone leveling column with a 4mm inner diameter makes it better to level your 3D printer.
- The silicone buffers are simply installed instead of the original spring and it is no longer possible movement, your set levels remain!
- After Sales Guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or Q&A us, we will try our best to service you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #5
FYSETC 2Pcs Prusa i3 MK3s+ Heater Cartridge 24V 40W 6x15 Heating Tube Pipe 1Meter(39.3in) for Prusa i3 MK3S/ MK3S+3D Printer Hotend Parts
Asin: B0BN5XYMSM
Specification: Power: 24V 40W, Diameter Of Heating Head: 6Mm(Length 15Mm); Wire Length:1Meter/39.3Inch..
Notification: Please Check It's 24V(Not 12V) 40W And Measure The Heater Length That Your 3D Printer Use At Present To Make Sure Our Product Is Suitable For You..
Advantage: This Heater Has High Quality, And Uses Closed Stainless Steel Sleeve, Much Higher Quality Than The Common Heating Tube On The Market.Safe Working Temperature: 0-285℃..
Application: A Good Replacement For The 40W Prusa Heater Cartridges, Compatible With 3D Printer Prus I3 Mk3/Mk3s/Mk3s+ V6 Hotend..
Features
- Packing List: 2 x 1Meter 24V 40W Heater Cartridge.
- Application: a good replacement for the 40w Prusa heater cartridges, compatible with 3d printer Prus i3 mk3/mk3s/mk3s+ V6 hotend.
- Specification: Power: 24V 40W, Diameter of heating head: 6mm(length 15mm); wire length:1meter/39.3inch.
- Advantage: This heater has high quality, and uses closed stainless steel sleeve, much higher quality than the common heating tube on the market.Safe working temperature: 0-285 .
- Notification: Please check it's 24V(Not 12V) 40W and measure the heater length that your 3D printer use at present to make sure our product is suitable for you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #6
FYSETC 3D Platform Prusa i3 MK3S+ MK4 PEY Build Plate: Upgrade Smooth PEY - Textured PEI Spring Steel Sheet Flexible Hot Bed Cover Removable Print Bed for MK2 MK52 MK3 MK3S XL 3D Printer Bed 254x241mm
Asin: B0CJXLG5G1
【Wide 3D Printing Material Compatibility】Support Various 3D Printer Filaments. After Testing, We Recommend The Pey Layer To Print Pla/ Tpu/ Petg (Temp Suggestion: 50°C-70°C, ≤90°C). The Textured Pei Plate Print Pla/ Pla-Cf/ Petg/ Pc/ Abs/ Tpu/ Nylon Etc. Printing Model Is Easy To Adhere On Pei Bed, Has A Great Adhesion, And Easy To Be Removed , Just Flex Slightly To Pop Your Prints Right Off. In Some Cases, Remove The Model Directly Without Taking The Printing Bed From Prusa Mk3 3D Printer..
【More Support】All Products Are Inspected Before Shipment. If You Have Any Questions About Product Quality Or Suggestions, Please Feel Free To Contact Us Via Your Order Id. We Are Very Grateful For Your Love And Care For The Product. 3D Printer Print Bed Is Our Main Product, This Kind Of Multicolor Pei - Pey Steel Plate Is Not Only Available In 254X241mm But Also In 196X190mm - Prusa Mini/ 235X235mm - Ender 3 V2, Ender 5, Neptune3, Neptune4/ 257X257mm - Bambulab X1c P1p P1s..
【Proven Solution】Made Of High Quality Spring Steel Plate. Flexible, Removable, High Strength And Heat Resistance, Dual-Side Design, Thicker And More Durable. Easy To Use, Put The Printing Plate Onto The Lab Printer Hot Bed, Then The Print Bed Levelling Will Automatically Go On While Machine Powered On. (Note:The Smooth Surface Has A Factory Protective Film That Needs To Be Removed.).
【A New Shiny Prusa Bed Plate】The Smooth Pey Side Is The Latest Printing Surface In Prusa I3 Mk3 Parts, Size 254X241mm/10X9.5Inch. Flaring Stars And Dots Fill The Entire Spring Plate, Which Makes Itself Beautiful As A Picture. Another Magical Thing, It Presents Different Patterns Under Different Intensities Of Light And Angles. This Is Its Distinctive Feature From Other 3D Printer Bed Mats, Such As Peo Plate, Pei Sheet Or Pet Plate Sheet Etc..
Features
- Upgrade Prusa Build Plate A new Double Sided heated bed sheet: Smooth PEY + Textured PEI. One side is a textured PEI bed which presents the frosted surface with a distinctive frosted touch. Another side is coated with a smooth PEY sheet which has a Starry & Fine Sequins pattern that shines brightly. The most important thing, the Stars and Dots pattern will be left on the printing model, which brings endless fun to your 3d printing. How Beautiful and Magical!
- A New Shiny Prusa Bed Plate The smooth PEY side is the latest printing surface in Prusa i3 mk3 parts, Size 254X241mm/10x9.5inch. Flaring stars and dots fill the entire spring plate, which makes itself beautiful as a picture. Another magical thing, it presents different patterns under different intensities of light and angles. This is its distinctive feature from other 3d printer bed mats, such as peo plate, pei sheet or PET plate sheet etc.
- Wide 3D Printing Material Compatibility Support various 3d printer filaments. After testing, we recommend the PEY layer to print PLA/ TPU/ PETG (Temp Suggestion: 50 C-70 C, 90 C). The textured PEI plate print PLA/ PLA-CF/ PETG/ PC/ ABS/ TPU/ Nylon etc. Printing model is easy to adhere on PEI bed, has a great adhesion, and easy to be removed , just flex slightly to pop your prints right off. In some cases, remove the model directly without taking the printing bed from prusa mk3 3d printer.
- Proven Solution Made of high quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, then the print bed levelling will automatically go on while machine powered on. (Note:The smooth surface has a factory protective film that needs to be removed.)
- More Support All products are inspected before shipment. If you have any questions about product quality or suggestions, please feel free to contact us via your order ID. We are very grateful for your love and care for the product. 3D printer print bed is our main product, this kind of multicolor PEI - PEY steel plate is not only available in 254x241mm but also in 196x190mm - Prusa Mini/ 235x235mm - Ender 3 V2, Ender 5, Neptune3, Neptune4/ 257x257mm - Bambulab X1C P1P P1S.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Dimensions: 0.03 x 10.00 x 9.49 inches
See On Amazon #7
FYSETC Spriite Extruder Gear Upgrades - Ender 3 S1 Pro Hotend Replacement - Nano Coating Dual Drive Gear Bearing: Integraded Shaft POM Die Steel Filament Feed Extrusion Part CNC 3D Printer Accessory
Asin: B0CXDF85MM
3. Feature 2: Different From The Original Gear With Flat Teeth, Our New Version Comes With Curved Tooth, Which Solves The Problems Of Inconsistent Extrusion And Poor Grip Strength Of 3D Printing Material That Often Occur In Extruders. Replace This Gear And Double Ball Bearings Onto Your Sprite Extruder, Make The Extruder Achieve Smaller Gaps And Higher Accuracy, You'll Get Better Flexible Filament Bite Force While Doing 3D Printing Project, No Matter Consumables Pla, Tpu, Petg, Wood, Abs, Etc..
5. High Temperature Resistance: All-Metal High-Temperature Printing At 500+℃, Well Made With High Precision, Easy To Install, Matches Perfectly With Other Sprite Extruder Accessory, Such As Crtouch, Nozzle Adapter Board, Heater Radiator, Ceramic Heat Element Rod, Heating Block, Silicone Insulation Sleeve, 3010 4010 Fan, E3dv6 Heat Throat. If Need Other Spare Parts, Please Go To Our Shop..
4.High Quality Material: Made Of Quality Pom And Die Steel With Cnc Processing. Filament Drive Gears Are Made From Die Steel, Not The Common Hardened Steel Material. Pessure Resistance Reaches Hrc 60+. And The Surface Hardness Hv Value Up To 1000-1200, Which Greatly Ensures The Gear Strength, Wear Resistance And Corrosion Resistance, Improve The Bearing Capacity And Extend The Service Life..
2. Feature 1: Compared To The Stock One, Our New Hot End Gear Is With A Integrated Shaft Design, Not Easily Fall Off From Pom Nut. Most Important, No Need Extra Assembly, Ensuring Better Concentricity And Reducing Eccentric Rotation, Thus The Gear Delivers Filament More Evenly. Note: For Marlin Firmware: 392 Steps; For Klipperr Firmware: Gear_Ratio: 42:12; Rotation_Distance: 28.546. That Gears Were Designed And Tested By K3d Community..
Features
- 1. Upgrade 3D Print Head Part: A must-have Drive Gear replacement for original Crealty Sprite Direct Drive Extruder Kit. Nano-coating surface treatment to advoid rusting and increase durability and reliability. Cmpatible with CREALTY Sprite Extruder Application models, such as Ender 3 V2 Neo - Ender-3 S1 - Ender-3 S1 Pro - Ender-3 S1 Plus - Ender 3 Max - CR-10 smart pro - Ender-3 V3 SE - Ender 5 Plus -Ender-5 S1 - CR-200B Pro - CR-M4 - CR10 Smart Pro - Sermoon V1 etc FDM 3D Printers.
- 2. Feature 1: Compared to the stock one, our new hot end gear is with a integrated shaft design, not easily fall off from POM nut. Most important, no need extra assembly, ensuring better concentricity and reducing eccentric rotation, thus the gear delivers filament more evenly. Note: for marlin firmware: 392 steps; for klipperr firmware: gear_ratio: 42:12; rotation_distance: 28.546. That gears were designed and tested by K3D community.
- 3. Feature 2: Different from the original gear with Flat teeth, our new version comes with Curved tooth, which solves the problems of inconsistent extrusion and poor grip strength of 3D printing material that often occur in extruders. Replace this gear and double ball bearings onto your Sprite extruder, make the extruder achieve Smaller gaps and higher accuracy, you'll get better flexible filament bite force while doing 3d printing project, no matter consumables PLA, TPU, PETG, Wood, ABS, etc.
- 4.High Quality Material: Made of quality POM and Die Steel with CNC processing. Filament Drive gears are made from die steel, not the common Hardened steel material. Pessure resistance reaches HRC 60+. And the surface hardness HV value up to 1000-1200, which greatly ensures the gear Strength, wear resistance and corrosion resistance, improve the bearing capacity and extend the service life.
- 5. High Temperature Resistance: All-metal high-temperature printing at 500+ , well made with high precision, easy to install, matches perfectly with other sprite extruder accessory, such as CRtouch, nozzle adapter board, heater radiator, ceramic heat element rod, heating block, silicone insulation sleeve, 3010 4010 fan, e3dv6 heat throat. If need other spare parts, please go to our shop.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon #8
FYSETC 3D Printer Part Prusa i3 MK3S+ Print Fan Hotend Replacement Fan 4010 5015 Fan DC 5V MK3S Blower Fan Extruder Cooling Radiator for 3D Printer MK3 Hot End DIY Accessory
Asin: B07NTKXVN8
Rated Voltage: 5015 Printing Fan Dc 5V, 0.35A 5800Rmp; 4010 Cooling Fan Dc 5V, 0.2A, 6800Rmp..
After Sales Guarantee: Each One Defective Item Can Have The Free Replace Or Refund, Need More Help Please Feel Free To Contact Us, We Will Try Our Best To Assist You..
Please Note: The Fan Has Two Sides,But The Side With Sticker Must Be Always Facing The Hotend (Not Visible When The Fan Is Mounted).Otherwise,The Cooling Won't Work Properly..
Size: About 50X50x15mm/ 1.9X1.9X0.59 Inch; 40X40x10mm/ 1.7X1.7X0.39 Inch; Cable Length: About 750Mm/ 29.5 Inch.
Features
- Brushless DC Blower Fan, best DIY replacement extruder hotend parts for Prus i3 MK3 MK3S MK3S+.
- Size: About 50x50x15mm/ 1.9x1.9x0.59 inch; 40x40x10mm/ 1.7x1.7x0.39 inch; Cable Length: about 750mm/ 29.5 inch
- Rated Voltage: 5015 Printing fan DC 5V, 0.35A 5800rmp; 4010 Cooling fan DC 5V, 0.2A, 6800rmp.
- Please Note: the fan has two sides,but the side with sticker must be always facing the hotend (not visible when the fan is mounted).Otherwise,the cooling won't work properly.
- After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #9
FYSETC Ender 5 Plus Bed Columns, 4Pcs 3D Printer Ender 3 S1 Pro Solid Bed Mounts, Height 18mm 0.7inch OD 0.63inch Stable Heat-Resistant Buffer for Ender 5 Pro Ant A8 Wanhao D9 Prus i3 Meg pro-Black
Asin: B07MR7Q986
The Silicone Buffers Are Simply Installed Instead Of The Original Spring. After Installing, Level Your Printer Then It Is No Longer Possible Movement, Your Set Levels Remain!.
What You Get? 4Pcs 18Mm/ 0.7Inch Silicone Mount Bed If You Can Not Sure The Length Whether Fit For Your Printer, Please Email Us..
This Heat-Resistant And Pressure-Resistant Silicone Leveling Column Are Made Of Quality Silicone, Which Help Cutting Back Any Vibrations When Working, With A 4Mm Inner Diameter Makes It Better To Level Your 3D Printer..
Special Design For Ender 3 S1 Pro/ Ender 5 Plus/ Ender 5 Pro/ Elego Neptune3/ Ant A8 / Wanhao D9 / Megai3 Pro/ Sw X1/ Monoprce Make Select Or Other Heated Bed That Has A Auto Bed Leveling Sensor..
Features
- A must have for 3D Printer Hot Bed/ Platform, bottom connect, serve to replace on your heating bed original springs. They're much stiffer than the stock springs and allow to really crank up the print speeds, so parts finish sooner with no loss in quality.
- Special design for Ender 3 S1 Pro/ Ender 5 plus/ Ender 5 Pro/ Elego Neptune3/ Ant A8 / Wanhao D9 / Megai3 Pro/ SW X1/ Monoprce Make Select or other heated bed that has a auto bed leveling sensor.
- The silicone buffers are simply installed instead of the original spring. After installing, level your printer then it is no longer possible movement, your set levels remain!
- This heat-resistant and pressure-resistant silicone leveling column are made of quality silicone, which help cutting back any vibrations when working, with a 4mm inner diameter makes it better to level your 3D printer.
- What you get? 4Pcs 18mm/ 0.7inch Silicone mount bed If you can not sure the length whether fit for your printer, please email us.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #10
BIGTREETECH SKR Mini E3 V3.0 Motherboard + TFT35 E3 V3.0.1 Touch Screen Upgrade Kit for Ender-3 Ender-3 Pro 3D Printers, BTT 32-bit Silent Main Board Onboard TMC2209, Support Marlin/Klipper
Asin: B082HBZ3BH | Model: SKR MINI | PartNumber: SKR MINI
🔥【Superior Heat Dissipation】Upgraded Skr Mini E3 V3.0 3D Printer Control Board Is Equipped With A Larger Aluminum Heat Sink Of Stepper Motor Driver Instead Of Pieces Small Heat Sink. Such Design Increases The Heat Dissipation Performance Of Skr Mini E3 V3 By 20%..
🔥【Two Working Modes】Tft35 E3 V3.0.1 Touch Screen Supports Uart Serial Port Screen Mode(Touch Screen Mode) And 12864 Screen Mode. It Can Replace Original Display Of Ender-3 3D Printer. You Can Enjoy Two Printing Modes: Sd Card And U Disk..
🔥【Tft35 E3 V3.0.1 Touch Screen】 Appearance Size: 93*87Mm, Power Input : 5V, This Is A 3.5 Inch Full-Color Screen With Ultra Clear Interface And Responsive Touch. Bigtreetech Tft35 E3 V3.0.1 Display Is Designed For Ender-3 3D Printer Especially, Which Can Be A Drop-In Replacement For Its Original Lcd Screen..
🔥【Diy Friendly Mainboard】Btt Skr Mini E3 V3.0 Motherboard Supports Bltouch, Rgb Lights, Blocking Detection And Shutdown Function. Our Skr Mini E3 V3 Also Supports Tft35 E3 V3.0.1/Tft35 V3.0.1/Tft28 V3.0 Touch Screen As Well As Original 12864 Lcd Screen..
Features
- Born for Ende-3 Series Printers Both BIGTREETECH SKR Mini E3 V3.0 mainboard and TFT35 E3 V3.0.1 touch screen are drop-in replacements for Ender-3 (same mouting holes, need to download firmware from GitHub web for update). And they are also compatible with Ende-3 pro, Ender-5, Ender-5 pro 3D printers.
- DIY Friendly Mainboard BTT SKR Mini E3 V3.0 motherboard supports BLTouch, RGB lights, blocking detection and shutdown function. Our SKR Mini E3 V3 also supports TFT35 E3 V3.0.1/TFT35 V3.0.1/TFT28 V3.0 touch screen as well as original 12864 LCD screen.
- Superior Heat Dissipation Upgraded SKR MINI E3 V3.0 3d printer control board is equipped with a larger aluminum heat sink of stepper motor driver instead of pieces small heat sink. Such design increases the heat dissipation performance of SKR Mini E3 V3 by 20%.
- TFT35 E3 V3.0.1 Touch Screen Appearance size: 93*87mm, power input : 5V, this is a 3.5 inch full-color screen with ultra clear interface and responsive touch. BIGTREETECH TFT35 E3 V3.0.1 display is designed for ender-3 3d printer especially, which can be a drop-in replacement for its original LCD screen.
- Two Working Modes TFT35 E3 V3.0.1 Touch screen supports UART serial port screen mode(touch screen mode) and 12864 screen mode. It can replace original display of Ender-3 3D printer. You can enjoy two printing modes: SD card and U disk.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #11
FYSETC Upgrade Prusa Mini 3D Printer Platform PEY Build Plate 196.3X190mm: Smooth PEY - Textured PEI Sheet Flex Dual Sides Spring Steel Plate Removable Heated Bed Cover for PETG Filament 1.75 PLA
Asin: B0CK2J6BK5
3. Great First Layer Adhesion: It Supports Various 3D Printer Filaments. After Testing, Recommend To Print Low Temp Pla/ Tpu/ Petg (Temp: 50°C-70°C, ≤90°C) On The Pey Surface. Other High Temp 3D Printing Material Abs On The Powder-Coated Print Bed. Do Not Scratch. An Appropriate Z Axis Height Is Very Important For First Layer Adhesion. Turn Off The Cooling Fan And Slow Down The Print Speed Help You To Avoid Prints Come Off The Plate Or Filament Buildup. A Roll Of Dry Filament Also Works..
5. Kinds Of 3D Printing Surface: All Products Are Inspected Before Shipment. If You Have Any Questions About Product Quality Or Suggestions, Please Feel Free To Contact Us Via Your Order Id. We Are Very Grateful For Your Love And Care For The Product. We Have Different Sizes For This Kind Of Multicolor Pei - Pey Steel Plate, Not Only Available In 254X241mm - Prusa I3 Mk3s, But Also In 235X235mm - Ender 3 V2, Ender 5, Neptune3, Neptune4/ 257X257mm - Bambulab X1c P1p P1s / 180X180mm - Kp3s..
4. 190X190mm Build Plate: Made Of High Quality Spring Steel Plate. Flexible, Removable, High Strength And Heat Resistance, Dual-Side Design, Thicker And More Durable. Easy To Use, Put The Printing Plate Onto The Lab Printer Hot Bed, Then The Print Bed Levelling Will Automatically Go On While Machine Powered On. (Note:The Smooth Surface Has A Factory Protective Film That Needs To Be Removed.).
2. A New Shiny Print Bed: Size 196.3X190mm/7.7X7.4Inch(Include The Handles). Smooth Pey Sheet Is The Latest Printing Surface. Flaring Stars And Dots Fill The Entire Spring Steel, Which Makes Itself Beautiful As A Picture. The Magical Thing, It Presents Different Patterns Under Different Intensities Of Light And Angles. This Is Its Distinctive Feature From Other 3D Printer Bed Mats, Such As Peo Plate Or Pet Plate Sheet, Glass Bed Etc. Colorful Pattern Won't Disappear With Lots Of Printing Times!.
Features
- 1. Upgrade Prusa mini+ Part: A new Double Sided heated bed sheet: Smooth PEY+Textured PEI. One side is a textured PEI bed which presents the frosted surface with a distinctive frosted touch. Another side is coated with a smooth PEY sheet which has a Starry & Fine Sequins pattern that shines brightly. The most important thing, the Stars and Dots pattern will be left on the printing model, which brings endless fun to your 3d printing. How Beautiful and Magical!
- 2. A New Shiny Print Bed: Size 196.3x190mm/7.7x7.4inch(include the handles). Smooth PEY sheet is the latest printing surface. Flaring stars and dots fill the entire spring steel, which makes itself beautiful as a picture. The magical thing, it presents different patterns under different intensities of light and angles. This is its distinctive feature from other 3d printer bed mats, such as peo plate or PET plate sheet, glass bed etc. Colorful pattern won't disappear with lots of printing times!
- 3. Great First Layer Adhesion: It supports various 3d printer filaments. After testing, recommend to print low temp PLA/ TPU/ PETG (Temp: 50 C-70 C, 90 C) on the PEY surface. Other High temp 3d printing material ABS on the powder-coated print bed. DO Not Scratch. An appropriate Z Axis height is VERY important for first layer adhesion. Turn off the cooling fan and slow down the print speed help you to avoid prints come off the plate or filament buildup. A roll of dry filament also works.
- 4. 190x190mm build plate: Made of high quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, then the print bed levelling will automatically go on while machine powered on. (Note:The smooth surface has a factory protective film that needs to be removed.)
- 5. Kinds of 3d printing surface: All products are inspected before shipment. If you have any questions about product quality or suggestions, please feel free to contact us via your order ID. We are very grateful for your love and care for the product. We have different sizes for this kind of multicolor PEI - PEY steel plate, not only available in 254x241mm - Prusa i3 MK3S, but also in 235x235mm - Ender 3 V2, Ender 5, Neptune3, Neptune4/ 257x257mm - Bambulab X1C P1P P1S / 180x180mm - KP3S.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Dimensions: 0.03 x 7.73 x 7.48 inches | Weight: 0.40 pounds
See On Amazon #12
BIQU MicroProbe V2.0 Bed Leveling Sensor kit 3D Printer Auto Leveling Tool with High Precision High Quality Metal Probe Suitable for B1 BX H2 Ender-3 RatRig VC3 Voron 2.4
Asin: B0CC4YKQSK
🍎Further Upgrades: Adopt Biqu Smart Chip, Micron Level Trigger Accuracy Ensures Perfect Auto Bed Level, No More Tedious Manual Bed Leveling. Microprobe Offers A Sleek, Futuristic-Looking Build With A Black Finish, Geometric Car-Inspired Design Elements, And Cool Indicator Light, Easy To Know The Working State..
🍎After Sales Support: If You Have Any Questions About Our Auto Bed Leveling Sensor Kit During Use, Please Feel Free To Contact Us. Our Technical Team Will Solve It For You In Time.We Have Uploaded The Compiled Firmware For The Microprobe On The Ender-3 Machine With Skr Mini E3 V3.0 To -Github, Please Feel Free To Contact Us If You Have Any Questions.
🍎Wide Compatibility: Suitable For Printing Platforms Of Various Materials, Such As Pei/Stickers/Glass/Metal. Suitable For A Variety Of Printers, Easily Mounted With Brackets, Eg B1/Bx/Ender-3, Simple And Convenient. 3D Models Of Brackets For Ratrig Vc3, Voron2.4, And Other Printheads Are Available For Download And Print Yourself. The Source Cad Model Of The Micropro Be Is Also Available To Provide A Reference For Users To Design Mounting Brackets For Other Machines.（This Set Without Brackets）.
🍎1000W+ Lifespan: High Quality Metal Probe, Wear-Resistant, Removable And Replaceable. With A Lifespan Of Up To 10,000,000+, Microprobe Will Be A Perfect Upgrade For Your Printer..
Features
- Higher Precision & Lighter: BIQU MicroProbe is 25mm long, 6g in weight, and has an accuracy of 0.001. It is 46% shorter, 40% lighter, and 10x more precise than other auto bed leveling sensors, high precision and low power consumption
- 1000W+ Lifespan: High quality metal probe, wear-resistant, removable and replaceable. With a lifespan of up to 10,000,000+, MicroProbe will be a perfect upgrade for your printer.
- Further Upgrades: Adopt BIQU smart chip, Micron level trigger accuracy ensures perfect auto bed level, no more tedious manual bed leveling. MicroProbe offers a sleek, futuristic-looking build with a black finish, geometric car-inspired design elements, and cool indicator light, easy to know the working state.
- Wide Compatibility: Suitable for printing platforms of various materials, such as PEI/Stickers/Glass/Metal. Suitable for a variety of printers, easily mounted with brackets, eg B1/BX/Ender-3, simple and convenient. 3D models of brackets for RatRig VC3, Voron2.4, and other printheads are available for download and print yourself. The source CAD model of the MicroPro be is also available to provide a reference for users to design mounting brackets for other machines. this set without brackets
- After Sales Support: If you have any questions about our Auto Bed Leveling Sensor Kit during use, please feel free to contact us. Our technical team will solve it for you in time.We have uploaded the compiled firmware for the microprobe on the Ender-3 machine with SKR MINI E3 V3.0 to -github, please feel free to contact us if you have any questions
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #13
FYSETC Prusa MK3S+ LCD Screen - 2004 Display - 3D Printer Controller: Reprap Smart Controller with Adapter RAMPS 1.4 Mendel 20 Characters X 4 Lines for I3 MK2.5 MK3 MK3S Einsy Rambo 1.2e Motherboard
Asin: B0CN3FRJJY
【Convenient】After Connecting This Panel To Your Ramps You Don't Need Your Pc Any More, The Smart Controller Supplies Power For Your Sd Card. Further More All Actions Like Calibration, Axes Movements Can Be Done By Just Using The Rotary Encoder On The Smart Controller. Print Your 3D Designs Without Pc, Just With A G-Code Design Stored On The Sd Card..
【Package Includes】1 X Lcd2004,2 X Connecting Cable..
【Firmware】You Need Marlinfirmware V3 Or Newer. If You Are Using Older Firmware, You Must Re-Flash Your Board. Support Einsy Rambo 1.2E Mainboard With Exp1,Exp2 Interfaces.
【Feature】This Smart Controller Contains A Sd-Card Reader, A Rotary Encoder And A 20 Character X 4 Line Lcd Display. You Can Easily Connect It To Your Ramps Board Using The "Smart Adapter" Included To Control The Heatbed/V6 Hotend Nozzle Temperature, Adjust Z Leveling/Printing Speed, Load/Unload The 3D Printing Material Pla, Petg, Abs, Carbonfiber Etc..
Features
- Product Item A must-have prusa mk3 3d printer part - LCD 2004 Smart Display Controller, Size: 15cm x 5.8cm. Compatible with MK2.5 MK3 MK3S MK3S+
- Feature This Smart Controller contains a SD-Card reader, a rotary encoder and a 20 Character x 4 Line LCD display. You can easily connect it to your Ramps board using the smart adapter included to control the heatbed/v6 hotend nozzle temperature, adjust Z leveling/Printing Speed, load/unload the 3d printing material PLA, PETG, ABS, Carbonfiber etc.
- Convenient After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
- Firmware You need Marlinfirmware v3 or newer. If you are using older firmware, you must re-flash your board. Support Einsy Rambo 1.2e Mainboard with EXP1,EXP2 Interfaces
- Package Includes 1 x LCD2004,2 x Connecting Cable.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Dimensions: 1.18 x 5.91 x 2.28 inches | Weight: 0.34 pounds
See On Amazon #14
FYSETC Resin 3D Printer Accessories - Small Silicone Slap Mat 410x310mm - 3D Printing Silicone Mat for Resin: Clean-up or UV Resin Transfer Foldable Work Pad to Protect Workspace for DLP SLA LCD Elego
Asin: B0838DDGVZ
3.Easy To Clean & Storage - The 3D Printer Silicon Mat Measures 16.1 X 12.2 Inch / 410 X 310Mm, Suit For Your Resin Tank,Resin Wash Station, Anycubi Wash And Cure 3 Plus, 3D Resin Washing Bucket. Easy To Clean With Water Or Dry-Wettable Wipes. This Small Mat Is Lightweight And Soft, Can Be Folded And Rolled Up For Storage, Which Can Be Used Repeatedly. If Need A Large Silicone Slap Mat, Please Search Asin:B0clgv2wlmat Our Store..
5. Wide Applications - These Silicone Desk Mat Is Suitable For Crafts, Jewelry, Casting Moulds, Resin Printing And Other Diy Tools And Material; It Also Can Be Used As A General Craft Mat Or Soldering Mat For Its High Temp Resistance. It Can Even Resist Melted Solder And The Tip Of Most Soldering Irons For Up To 3 Minutes..
4. Ergonomic Design - Our Silicone Mat Adopts Round-Arc Design; And This Rubber Mat With Lip, Can Be A Good Collection Of Liquid Resin, Stop Overflowing..
2. Quality Rubber Work Mat - The Silicone Slap Mat Is Made Of Environmentally Friendly Silicone Material, Non-Slip And Waterproof, Smooth Surface; Sturdy And Durable Material That Will Not Be Messed By Printer Resins, Or Most Glues!.
Features
- 1. Package Content - You will get 1 pack of Small silicone mat; Ideal with your resin LCD 3D Printers use, such as Elego Saturn3 ultra MSLA- Mars 4 ultra to protect the workstation when dealing with the UV resin transfering with metal or paper filter funnel or resin wash and cure station or placing the flex build plate. This silicone resin mat is a must-have epoxy accessory tool for Resin 3D printer lovers.
- 2. Quality Rubber work Mat - The silicone slap mat is made of environmentally friendly silicone material, non-slip and waterproof, smooth surface; Sturdy and durable material that will not be messed by printer resins, or most glues!
- 3.Easy to Clean & Storage - The 3d printer silicon mat measures 16.1 x 12.2 inch / 410 x 310mm, suit for your resin tank,resin wash station, anycubi wash and cure 3 plus, 3d resin washing bucket. Easy to clean with water or dry-wettable wipes. This small mat is lightweight and soft, can be folded and rolled up for storage, which can be used repeatedly. If need a large silicone slap mat, please search Asin:B0CLGV2WLMat our store.
- 4. Ergonomic Design - Our silicone mat adopts round-arc design; and this rubber mat with lip, can be a good collection of liquid resin, stop overflowing.
- 5. Wide Applications - These silicone desk mat is suitable for crafts, jewelry, casting moulds, resin printing and other DIY tools and material; It also can be used as a general craft mat or soldering mat for its high temp resistance. It can even resist melted solder and the tip of most soldering irons for up to 3 minutes.
- See more on Amazon...
Brand: FYSETC | Manufacturer: US-Silicone Slap Mat Blue
See On Amazon #15
BIGTREETECH SKR Mini E3 V3.0 Control Board 32Bit Silent Board, New Upgrade 3D Printer Parts for Ender 3, Ender3 Pro, Ender 3 V2 (with BLTouch & 80cm Extension Cable)
Asin: B09LCKVD32 | Model: SKR Mini E3 V3.0+Bltouch with 80cm Cable | PartNumber: SKR Mini E3 V3.0+Bltouch with 80cm Cable
【Increased Heat Sink】Redesign The Drive Heat Sink, Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Heat Dissipation Performance;.
【Bltouch V3.1】Bltouch Is An Auto Leveling Sensor For 3D Printers Based On Open-Source.Simple, Smart, High-Precision.It Could Work With Any Kinds Of Bed Materials, Such As Glasses, Woods, Metals, And So On. This Kit With 80Cm Extension Wire..
【Output Power Supply】Increase Spi Output Port +3.3V Power Supply, External Spi Sensor Power Supply Voltage +3.3V And +5V Are Optional, Support The Motherboard To Directly Supply Power To Peripherals..
【Three Cnc Fan】Increase The Heat Dissipation Controllable Fan To Reduce The Printer Temperature When The Device Is Working;.
Features
- Main Control Chip Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;
- Three CNC Fan Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;
- Increased Heat Sink Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance;
- Output Power Supply Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
- BLTouch V3.1 BLTouch is an auto leveling sensor for 3D Printers based on open-source.Simple, Smart, High-precision.It could work with any kinds of bed materials, such as glasses, woods, metals, and so on. This kit with 80cm extension wire.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #16
FYSETC 3D Printer Parts Heat Bed Mosfet Hot Bed Power Expansion Board High Current Load Module MOS Tube for 3D Printer Accessories-Pack of 1
Asin: B07C4PGXFK | Model: 8541631465 | PartNumber: 8541631465 | Ean: 0711102059857 | UPC: 711102059857
This Module Under Normal Cooling, Measured I (Max) = 30A Can Stable Long-Term Work During Use, So We Suggest The Current Should Not Exceed 30A..
Package Includes: 1Pc Red Mosfet, The Red Led Light To Indicate Use Looks Great Inside Its Case..
Connect The Control Signal Of Ramps1.4 Or Mks Mosfet To Bed, Can Use Hot Bed Output Signal Of Ramp1.4 And Mks Series To Control;.
Has A Large Footprint: Extra Large Heat Sink, More Stable; The Maximum Current Can Be Up To 30A Or More, Can Use Digital Signal Of 5-24V To Control. Work Well On Wanhao I3 Aka Monoprice Control Box/ I3 Mega/ Tronxy X5sa.
Features
- Good mosfet for your 3D printer hotbed: control hot bed, print head heating, compact appearance, compact design, more powerful heat dissipation, to solve the problem of excessive heat bed power, current load problem. It works well on wanhao i3/ i3 mega(a bit tough but fine / Tronx-X5SA etc.
- Has a large footprint: Extra large heat sink, more stable; the maximum current can be up to 30A or more, can use digital signal of 5-24v to control. Work well on wanhao i3 aka monoprice control box/ i3 mega/ Tronxy X5SA
- This module under normal cooling, measured I (Max) = 30A can Stable long-term work during use, so we suggest the current should not exceed 30A.
- Connect the control signal of Ramps1.4 or MKS Mosfet to bed, can use hot bed output signal of Ramp1.4 and MKS series to control;
- Package includes: 1PC RED Mosfet, the red LED light to indicate use looks great inside its case.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #17
FYSETC 3D Printer Prusa Mini+ Bed - 196.3x190mm - Textured PEI Build Plate: Double Sided PEI Spring Steel Platform 7.7x7.4 inch Flexible Removable Heatbed Cover for Printing Filament PLA PETG ABS
Asin: B08P5JMHFQ
3. Wide Filament Compatibility: Pei Build Plate Prints Most 3D Printing Material, Such As Pla / Abs / Petg / Tpu / Nylon. It's Resistant To High Temperature Of 260°C, Much Higher Than That Smooth Peo Pet Plate, Friendly To High-Temp Material. For High Temp Material, Such As Abs, Recommend To Seal A 3D Printer Cover(Enclosure) Or Use Glue To Get A Great First Layer Adhesion. Successful Tips: Turn Off The Cooling Fan And Slow Down Print Speed To 10-25Mm/S When Going On The First Few Layers..
5. Other Prusa Mini Mini+ 3D Printer Accessories: If Need Mini Heat Bed Thermistor (Asin:B0bgrqnspk), 5015 5V Cooling Fan (Asin:B08yd48zbv), 4010 Print Fan ( Asin:B09w2984n6), Please Go To Our Shop..
4. Easy To Use And Remove: Attach To Your Magletic Hotbed Platform, Perform A One-Time Z-Height Adjustment, And Begin Printing. Please Do Not Scratch The Platform With The Nozzle. After Printing, Let The Bed Cool Down To The Room Temperature, Simply Remove The Model, Even Not Take The Buildplate From The Hot Bed..
2. 190X190mm Pei Sheet: This Printing Plate Fits For 3D Printer Prus Mini Mini+ Heatbed, Size 190X190x0.5Mm / 7.4X7.4X0.1Inch. If Need Colorful Pey Textured Build Plate, Please Search Asin:B0ck2j6bk5 At Our Store..
Features
- 1. Prusa Mini Textured PEI Build Plate: Dual-sided 3d printer print bed mat, flexible, removable and durable. The PEI frosted surface presents a distinctive frosted touch, provides higher adhesion for the model and pressure without warping. After printing, use steel wool pads with detergent to clean the sheet, it will keep the PEI like new.
- 2. 190x190mm PEI Sheet: This printing plate fits for 3d printer Prus Mini Mini+ Heatbed, size 190x190x0.5mm / 7.4x7.4x0.1inch. If need colorful PEY Textured Build Plate, please search Asin:B0CK2J6BK5 at our store.
- 3. Wide filament compatibility: PEI build plate prints most 3D printing material, such as PLA / ABS / PETG / TPU / nylon. It's resistant to high temperature of 260 C, much higher than that smooth PEO PET plate, friendly to high-temp material. For high temp material, such as ABS, recommend to seal a 3d printer cover(enclosure) or use glue to get a great first layer adhesion. Successful Tips: Turn OFF the cooling fan and slow down print speed to 10-25mm/s when going on the first few layers.
- 4. Easy to Use and Remove: Attach to your magletic hotbed platform, perform a one-time z-height adjustment, and begin printing. Please do not scratch the platform with the nozzle. After printing, let the bed cool down to the room temperature, simply remove the model, even not take the buildplate from the hot bed.
- 5. Other Prusa Mini Mini+ 3d printer accessories: If need mini heat bed thermistor (Asin:B0BGRQNSPK), 5015 5V cooling fan (Asin:B08YD48ZBV), 4010 print fan ( Asin:B09W2984N6), please go to our shop.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #18
FYSETC 3D Printing Build Plate 120mm Round Ultra-Flexible Removable HeatedBed Build Surface Hot Bed Sticker for Monoprce MP Select Mini Delta 3D Printer Part
Asin: B07WXH3J16
Please Kindly Note: The Plate Is Magletic, The Temperature (Recommended From 50 To 75 Degrees Centigrade) Should Not Exceed 80 Degrees. So It Works Well For Pla Tpu Wood, Not Suitable For Abs Petg Filament. If The Heatbed Temperature Is Beyond 80 Degree, It Will Lose Magletism Or Turn To Be Bent..
If You Want To Printer Abs Or Petg, Please Refer To Spring Steel Plate, Pei Sheet Or Glass Bed With This Same Size..
Size: The Diameter Is Around 120Mm Round, Fit For Monoprie Mp Select Mini Delta 3D Printer And Other 3D Printers With The Similar Printing Diameter. ( Cut It To Meet Your Size Requirement Is Available).
2 In 1 Plate: The A Plate Is Flexible, It Is Easy To Move It Away From Build Platform And Take Away Printed Models, New Version B Plate About 1.2Mm/0.047Inch, Much Thicker Than That 0.7Mm With Strong Adhesive, Stick On The Build Surface.
Features
- 3D Printing Build Surface Great Upgrade Heatbed Plate Sheet: can install on a hoted bed and glass platform, just fit for PLA TPU Wood filament, not for ABS PETG filament.
- 2 in 1 Plate: the A plate is flexible, it is easy to move it away from build platform and take away printed models, New version B plate about 1.2mm/0.047inch, much thicker than that 0.7mm with strong adhesive, stick on the build surface
- Please Kindly Note: the plate is magletic, the temperature (recommended from 50 to 75 degrees centigrade) should not exceed 80 degrees. so it works well for PLA TPU Wood, not suitable for ABS PETG filament. if the heatbed temperature is beyond 80 degree, it will lose magletism or turn to be bent.
- Size: the diameter is around 120mm round, fit for Monoprie MP Select Mini Delta 3D Printer and other 3D printers with the similar printing diameter. ( Cut it to meet your size requirement is available)
- If you want to printer ABS or PETG, please refer to Spring Steel Plate, PEI sheet or glass bed with this same size.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #19
FYSETC Elego 3D Printer Upgrade Accessory - Neptune4 X Y Belt Replacement Part- 2GT Synchronous Drive Belt: Non-Slip RF Timing Belt X 770mm Y Axis 756mm Width 6mm Pressed Copper Buckle Easy Install
Asin: B0CXDQ8DB8
3.Upgraded Anti-Slip Version: This 2Gt-6Mm Drive Belt Is Made Of Reinforced Rubber, Which Has Very Good Durable And Corrosion Resistance And It Will Not Stretch Under Normal Tension. It Is Specially Developed For 3D Printers. The Tooth Surface Of The Belt Is Made Up Of Specially Treated Tooth Cloth That Minimizes The Chance Of The Belt Slipping. High Wear Resistance And Good Crack Resistance, Long Anti-Wear Life. A Perfect Replacement For The Original..
5.Package Include: 2Pcs X Y Synchronous Timing Belt Pre-Applied With With Copper Sleeves On Both Ends, Come With Extra 4Pcs Crimping Copper Connectors. Due To Fine Differences On The Whole Machine Assembly, If Belt Is A Bit Loose Or Short, Please Remove The Copper Fitting And Reclamp A Little Farther Out/Inside In Order To Get It To Work..
4.Stable Operation And Low Noise: High Precision. High-Strength Structural Design, Anti-Extension, Anti-Jumping, Make The Transmission More Stable, High Precision Seamless Matching Synchronization Wheel. If Need Bltouc Mount Bracket, Please Search Asin:B0clyjvpqd At Our Shop..
2.Easy Installation: Drop-In 3D Printer Motion Part, Easy To Install Onto The Belt Tensioner. When Replacing This Belt, The Tension Of Tensioner Must Be Reduced To A Minimum Before It Can Be Removed. Remove The Old Stock From Belt Plate, Assemble The New Then Hook Into The Mount Bracket On Print Head. Good Work With The Pulleys Provides Perfect And Precise Linear Function For Your Machine. Due To The Belt Is A Consumable Part, Regular Replacement Will Make Your Printing Result Better..
Features
- 1. Fit FDM 3D Printer: This X - Y drive belt kit is ONLY compatible with Elego Neptune4. X axis Length: 770mm/30.3inch (Longer), Y axis Length:756mm/29.7inch(Shorter), just by comparison the belt objects to identify them. Note: NOT for Neptune4 Pro which needs X belt 31in or 787.4mm, but Y fits perfect; Neither for Neptune4 Plus, Neptun 3 Max or kobra2. Please confirm your machine before ordering. If need belt for Neptune3 Pro or 3 Plus, please search Asin B0CLS483LF or B0CLVNNMM2 at our shop.
- 2.Easy Installation: Drop-in 3d printer motion part, easy to install onto the belt tensioner. When replacing this belt, the tension of tensioner must be reduced to a minimum before it can be removed. Remove the old stock from belt plate, assemble the new then hook into the mount bracket on print head. Good work with the pulleys provides perfect and precise linear function for your machine. Due to the belt is a consumable part, regular replacement will make your printing result better.
- 3.Upgraded Anti-slip Version: This 2GT-6mm drive belt is made of reinforced rubber, which has very good durable and corrosion resistance and it will not stretch under normal tension. It is specially developed for 3D printers. The tooth surface of the belt is made up of specially treated tooth cloth that minimizes the chance of the belt slipping. High wear resistance and good crack resistance, long anti-wear life. A perfect replacement for the original.
- 4.Stable Operation and Low Noise: High precision. High-strength structural design, anti-extension, anti-jumping, make the transmission more stable, high precision seamless matching synchronization wheel. If need BLTouc Mount Bracket, please search Asin:B0CLYJVPQD at our shop.
- 5.Package Include: 2pcs X Y synchronous timing belt pre-applied with with copper sleeves on both ends, come with extra 4pcs crimping copper connectors. Due to fine differences on the whole machine assembly, if belt is a bit loose or short, please remove the copper fitting and reclamp a little farther out/inside in order to get it to work.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon
Looking For Something Else?
Search