Knadgbft 3 Piece Tripod Foot Pads Heavy Suppression Pads Dampers Rubber for Telescope Mounts Adapter
Asin: B0CLV5JXHN | Model: I500389698 | PartNumber: I500389698 | Ean: 4711897452242
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Telescope And Spotting Scope Vibration Is Caused By Windy Conditions, An Unsteady Mount Or Tripod Or Even An Accidental Bump To The Instrument, And Results In Reduced Image Quality..
They Work On Any Surface: Grass, Dirt, Concrete, Asphalt, Wood, Etc., For Both Telescopes And Spotting Scopes..
The Pads Fit Between The Bottom Of The Tripod Legs And The Ground, A Simple And Functional Solution To The Problem Of Image Disturbance..
Features
- The set of three Vibration Suppression Pads will reduce vibration time by almost 100% and decrease vibration amplitude.
- The pads fit between the bottom of the tripod legs and the ground, a simple and functional solution to the problem of image disturbance.
- Telescope and spotting scope vibration is caused by windy conditions, an unsteady mount or tripod or even an accidental bump to the instrument, and results in reduced image quality.
- They work on any surface: grass, dirt, concrete, asphalt, wood, etc., for both telescopes and spotting scopes.
- See more on Amazon...
Brand: Knadgbft | Manufacturer: Knadgbft
See On Amazon Similar To Knadgbft 3 Piece Tripod Foot
#1
NEEWER Universal Tripod Feet Pad with Detachable Tripod Spikes, 3 Set Non Slip 60mm Diameter Tripod Monopod Rubber Feet Spikes Replacement with 3/8" Screw, Extra Stability and Flexible Angle
Asin: B0BPL5YNXR | Model: 33000020 | PartNumber: 33000020
【Standard 3/8" Screw Connector】The Tripod Feet Come With Universal 3/8" Screw - A Good Fit For All Tripods And Monopods With 3/8" Thread. Compatible With Manfrotto Benro Gitzo Kingjoy Tripod And More. Can Also Be Used To Replace And Repair Your Original Tripod Feet.
【Greater Grip With Non Slip Rubber Build】The Featured Silicone Rubber Conception, Coupled With An Anti Slip Raised Dot Pattern Ensure The Tripod Feet Don't Move About On Flat Surfaces And Even Sandy Terrain. The Rubber Pad Also Prevents The Tripod Feet From Scratching Your Floor.
【Flexible Angle Adjustment】 With The Notched Pad Design, The Tripod Feet Can Tilt Up And Down Within 90 Degrees To Enable Tripod Leg Adjustment, And Make It Possible To Splay Tripod Legs To Lower The Center Of Gravity For Greater Stability - Well Suited For Low Angle Shooting.
【Detachable Tripod Spikes】The Tripod Feet Pads With Detachable Spikes Are Highly Adaptive To A Wide Range Of Surfaces, Ranging From Soft Terrain Like Sand, Snow, And Grass, To Hard Ground Such As Rocky Surfaces. Use The Rubber Pads To Stabilize Your Tripod On Sand, Or Remove The Rubber Pads To Use The Pointy Spikes To Dig In Ground For Extra Group..
Features
- Larger diameter 60mm Tripod Rubber Feet The tripod/monopod feet are designed with enlarged 60mm diameter oval pads for greater contact area on smooth surfaces and extra tripod stability. The stainless steel material gives added durability to the he bolts for a longer service life.
- Detachable Tripod Spikes The tripod feet pads with detachable spikes are highly adaptive to a wide range of surfaces, ranging from soft terrain like sand, snow, and grass, to hard ground such as rocky surfaces. Use the rubber pads to stabilize your tripod on sand, or remove the rubber pads to use the pointy spikes to dig in ground for extra group.
- Standard 3/8 Screw Connector The tripod feet come with universal 3/8 screw - a good fit for all tripods and monopods with 3/8 thread. Compatible with Manfrotto Benro Gitzo Kingjoy tripod and more. Can also be used to replace and repair your original tripod feet
- Flexible Angle Adjustment With the notched pad design, the tripod feet can tilt up and down within 90 degrees to enable tripod leg adjustment, and make it possible to splay tripod legs to lower the center of gravity for greater stability - well suited for low angle shooting
- Greater grip with non Slip Rubber Build The featured silicone rubber conception, coupled with an anti slip raised dot pattern ensure the tripod feet don't move about on flat surfaces and even sandy terrain. The rubber pad also prevents the tripod feet from scratching your floor
- See more on Amazon...
Brand: Neewer | Manufacturer: NEEWER
Weight: 0.07 pounds
See On Amazon #2
FTF GEAR Compact Aluminum DSLR Camera Tripod and Monopod, Loads up to 20 lbs
Asin: B08ZC6T9D8 | Model: FTF-003 | PartNumber: FTF-003 | Ean: 0733569144952 | UPC: 733569144952
2 In 1 Config- Center Support Can Be Converted Into A Stand Alone Monopod..
Ultra Compact - Weighing In At Only 2.8 Lbs And 15 Inches Long, This Is Perfect For On Site Or Outdoor Camera Work..
Will It Hold My Rig? - Our Tripod Is Made Of Lighweight But Strong Materials, Weighing 2.8 Lbs. It's Capable Of Holding Up To 20Lbs..
Features
- FTF GEAR is a Fulltime Filmmaker brand, our goal is to help artists of all skill levels to create professional grade videos.
- WILL IT HOLD MY RIG? - Our tripod is made of lighweight but strong materials, weighing 2.8 lbs. It's capable of holding up to 20lbs.
- 2 in 1 CONFIG- Center support can be converted into a stand alone monopod.
- ULTRA COMPACT - Weighing in at only 2.8 lbs and 15 inches long, this is perfect for on site or outdoor camera work.
- See more on Amazon...
Brand: FTF GEAR | Manufacturer: FTF GEAR
Dimensions: 4.60 x 16.30 x 7.80 inches | Weight: 2.80 pounds
Warranty: 1 year warranty
See On Amazon
Looking For Something Else?
Search