Tent Stove Jack Kit Black, Silicone High Temp Flexible Roof Jack Pipe Boot Metal Roofing Pipe Flashing, Tent Roof Stove Jack Kit for Bell Tent,Yurt,Wood Burner,Travel Stove (Pipe OD 1 3/4"-3 1/4")
Asin: B0CM1W5BZL | Model: CC23-Black | PartNumber: CC23-Black
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.ăEffective ProtectionăThe Tent Stove Flashing Kit Ideal For Use With Three-Wall Pipe Sections To Prevent Hot Chimney Pipes From Directly Contacting Your Tent Or Shelter And Provide A Tight Seal Around The Chimney Pipe At The Exit Point, Which Can Protect The Tent..
ăWidely ApplicationăThick Rubber Folds And Stainless Steel Rings At The Bottom Allow Them To Fit Any Roof Pitch Or Metal Profile. This Tent Stove Flashing Is Suitable For Multiple Occasions And Can Be Used With Bell Tents, Tents, Yurts, Cabins, Sheds, Boats, Houseboats, Summer Houses, Workshops, Garages And Anything Else That Requires A Flue Outlet..
ăEasy To InstallăSilicone Tent Stove Jack Kit Is Easy To Fix To A Tent. First Customize The Right Size With Scissors,Cut The Corresponding Chimney Pipe, And Then Unscrew The Screws And Nuts On The Base To Fix It At The Place Where It Needs To Be Installed. This Tent Flashing Kits Suitable For Greenhouses, Cabins, Sheds And Boats..
ăHeat Resistant MaterialăThe Tent Flue Flashing Kit For Bell Tent Made Of Heat Resistant Silicone Stainless Steel Ring And Nut. Silicone Tent Stove Jack Kits Are Rated To Service A Continuous Temperature Range Of -100 To +450 Degrees Fahrenheit. Silica Gel Has Good Temperature Resistance And Flexible, Allowing Expansion, Contraction And Pipeline Vibration, Not Easy To Be Damaged Or Deformed..
Features
- Product Size Fits Pipes with Outside Pipe Diameter: 1 3/4"-3 1/4" (45~85mm, over 4.5 cm, you will need to cut your own rubber ring). Please confirm the size of the chimney pipe base before purchasing. Colour: Black.
- Heat Resistant Material The tent flue flashing kit for bell tent made of heat resistant silicone stainless steel ring and nut. Silicone Tent Stove Jack Kits are rated to service a continuous temperature range of -100 to +450 degrees Fahrenheit. Silica gel has good temperature resistance and flexible, allowing expansion, contraction and pipeline vibration, not easy to be damaged or deformed.
- Effective Protection The tent stove flashing kit ideal for use with three-wall pipe sections to prevent hot chimney pipes from directly contacting your tent or shelter and provide a tight seal around the chimney pipe at the exit point, which can protect the tent.
- Easy to Install Silicone Tent Stove Jack Kit is easy to fix to a tent. First customize the right size with scissors,cut the corresponding chimney pipe, and then unscrew the screws and nuts on the base to fix it at the place where it needs to be installed. This tent flashing kits suitable for greenhouses, cabins, sheds and boats.
- Widely Application Thick rubber folds and stainless steel rings at the bottom allow them to fit any roof pitch or metal profile. This tent stove flashing is suitable for multiple occasions and can be used with bell tents, tents, yurts, cabins, sheds, boats, houseboats, summer houses, workshops, garages and anything else that requires a flue outlet.
- See more on Amazon...
Brand: Tceapoo | Manufacturer: Tceapoo
Dimensions: 0.50 x 3.00 x 2.00 inches | Weight: 0.93 pounds
See On Amazon Similar To Tent Stove Jack Kit Black
#1
FIREHIKING Hot Tent Stove Jack 9" x 7.8" with Rain Flap Highly Flame-Retardant for Onetigris Hot Tent
Asin: B0BFHNMG27
ăStove Jack Kită The Replaceable Resistant Stove Jack Can Prevent The Tent From Being Burned By The Stove Pipe. It Also Has A Rain Flap That Can Prevent Rainwater That Flows Down From The Top Of The Tent From Entering The Interior Of The Tent..
ăEasy To Installă Stove Jack Edges With Velcro, Very Easy To Install And Replace..
ăMaterială High Temperature Resistant Silicone Fiberglass, Withstanding Temperatures Of 572°F/300°C..
ăDiy Hole Diameteră You Can Cut The Stove Jack Cloth According To The Diameter Of Your Stovepipe..
Features
- Dimensions 9" x 7.8"/ 23cm *20cm.
- DIY Hole Diameter You can cut the stove jack cloth according to the diameter of your stovepipe.
- Stove Jack Kit The replaceable resistant stove jack can prevent the tent from being burned by the stove pipe. It also has a rain flap that can prevent rainwater that flows down from the top of the tent from entering the interior of the tent.
- Material High temperature resistant silicone fiberglass, withstanding temperatures of 572 F/300 C.
- Easy to Install Stove jack edges with Velcro, very easy to install and replace.
- See more on Amazon...
Brand: FIREHIKING | Manufacturer: FH 20 Jack
See On Amazon #2
SoloWilder DIY Hot Tent Stove Jack with Rain Flap 9.4" x 9.4"
Asin: B08XTK9YFT
[Removable And Replaceable Design] - The Fireproof Stove Jack Adopts A Detachable Velcro Design. This Is Beneficial To Replace The Chimney Stove Jack When The Chimney Cloth Is Damaged, So As To Prolong The Service Time Of The Tent..
[Standard Square Size] - The Size Of This Stove Jack Is 9.4X9.4 Inches..
[Velcro Accessories] - We Gave Away Velcro Accessories. You Can Sew A Ring Of Velcro On The Tent, And Then Stick The Chimney Stove Jack On The Velcro So That The Stove Jack Can Be Removed And Replaced Easily..
[Grey Flame Retardant Chimney Cloth] - The Main Body Of The Stove Jack Is Made Of Light Gray Coated Glass Fiber Material, Which Is Resistant To High Temperature And Can Keep Working In A Certain Temperature Range. The Material Cannot Be Damaged By An Open Fire..
Features
- [DIY THE STOVE JACK DIAMETER] - The chimney stove jack is designed in one piece. This allows campers to cut their stove holes with scissors to match different diameter stove jacks. Besides, the design of the rainproof flap can prevent rain or dust from entering the tent from the stove jack.
- [GREY FLAME RETARDANT CHIMNEY CLOTH] - The main body of the stove jack is made of light gray coated glass fiber material, which is resistant to high temperature and can keep working in a certain temperature range. The material cannot be damaged by an open fire.
- [REMOVABLE AND REPLACEABLE DESIGN] - The fireproof stove jack adopts a detachable Velcro design. This is beneficial to replace the chimney stove jack when the chimney cloth is damaged, so as to prolong the service time of the tent.
- [VELCRO ACCESSORIES] - We gave away Velcro accessories. You can sew a ring of Velcro on the tent, and then stick the chimney stove jack on the Velcro so that the stove jack can be removed and replaced easily.
- [STANDARD SQUARE SIZE] - The size of this stove jack is 9.4x9.4 inches.
- See more on Amazon...
Brand: SoloWilder | Manufacturer: SoloWilder
See On Amazon #3
OneTigris Hot Tent Stove Jack, 9" x 7.8"
Asin: B0836TDFD6
Grade A Hook-And-Loop Fasteners For Heightened Security And Usability.
Dimensions: 9" *7.8"/ 23Cm *20Cm | Weight: 1.2Oz/ 36G.
Quality Craftsmanship To Effectively Prevent Fire Hazards In The Outdoors.
Designed Specifically For Onetigris Hot Tents (Smokey Hut, Wild Haven, Iron Wall, Tegimen & Rock Fortress, Etc) To Fit Hot Flue Pipes.
Features
- Silicone Fiberglass material that is highly fire retardant (up to 572 F/ 300 C)
- Designed specifically for OneTigris hot tents (Smokey Hut, Wild Haven, Iron Wall, Tegimen & Rock Fortress, etc) to fit hot flue pipes
- Grade A hook-and-loop fasteners for heightened security and usability
- Quality craftsmanship to effectively prevent fire hazards in the outdoors
- Dimensions: 9 *7.8/ 23cm *20cm | Weight: 1.2oz/ 36g
- See more on Amazon...
Brand: OneTigris | Manufacturer: OneTigris
Dimensions: 7.90 x 9.00 x 9.00 inches | Weight: 0.08 pounds
See On Amazon #4
ikare Stove Jack Kit for Tent - 3 to 6 1/4inch Silicone High Temperature Resistant Chimney Duct Sealing Kit for Stove, Yurt, Frontier, Compatible with Triple Wall Pipe Sections
Asin: B0CPDQ92L8
Durable Stainless Steel Base: The Base Is Constructed From Stainless Steel, Ensuring Long-Lasting Durability. The Stainless Steel Ring On The Outer Surface Is Resistant To Rust Even When Exposed To The Elements For Extended Periods..
Wide Range Of Applications: Our Tent Flue Flashing Kit Is Versatile And Can Be Used In Various Settings. It Is Suitable For Bell Tents, Regular Tents, Yurts, Cabins, Sheds, Boats, Houseboats, Summer Houses, Workshops, Garages, And Any Structures That Require A Flue Outlet. The Thick Rubber Folds And Stainless Steel Rings At The Bottom Ensure Compatibility With Different Roof Pitches And Metal Profiles..
Hassle-Free Installation With Included Screws: Our Product Comes With Matching Screws, Eliminating The Need For Drilling Holes Or Preparing Screws Yourself. This Convenient Feature Saves You Time And Effort During The Installation Process. Please Confirm The Size Of The Chimney Pipe Base Before Purchasing..
Perfect Fit For Various Pipe Sizes: The Base Size Of 24*24Cm Is Designed To Accommodate Pipe Diameters Ranging From 3 To 6 1/4 Inches (75-160Mm). You Can Confidently Choose The Appropriate Size To Ensure A Secure And Snug Fit..
Features
- High-Temperature Resistant Silicone Material: Our product is made from high-quality silicone material that can withstand temperatures up to 300 degrees Celsius. The silicone cover is conveniently marked with size indications, allowing for easy customization by cutting it as needed.
- Perfect Fit for Various Pipe Sizes: The base size of 24*24cm is designed to accommodate pipe diameters ranging from 3 to 6 1/4 inches (75-160mm). You can confidently choose the appropriate size to ensure a secure and snug fit.
- Durable Stainless Steel Base: The base is constructed from stainless steel, ensuring long-lasting durability. The stainless steel ring on the outer surface is resistant to rust even when exposed to the elements for extended periods.
- Hassle-Free Installation with Included Screws: Our product comes with matching screws, eliminating the need for drilling holes or preparing screws yourself. This convenient feature saves you time and effort during the installation process. Please confirm the size of the chimney pipe base before purchasing.
- Wide Range of Applications: Our tent flue flashing kit is versatile and can be used in various settings. It is suitable for bell tents, regular tents, yurts, cabins, sheds, boats, houseboats, summer houses, workshops, garages, and any structures that require a flue outlet. The thick rubber folds and stainless steel rings at the bottom ensure compatibility with different roof pitches and metal profiles.
- See more on Amazon...
Brand: ikare | Manufacturer: ikare
Warranty: 1year
See On Amazon #5
Tent Stove Jack Kit, 2 Silicone High Temp Tent Roof Stove Jack Kit for Bell Tent, Hot Tent Stove Jack for Bell Tent, Yurt, Wood Burner, Travel Stove, Compatible Triple Wall Pipe Sections
Asin: B0BL2FQ6K8 | Model: 104642 | PartNumber: 104642
[Easy Installation]: Federedevo Flashers Come With Their Nuts For Easy Attachment To A Variety Of Tents. You Can Also Easily Customize The Right Size With Scissors..
[100% Guarantee]: If You Have Any Questions Or Difficulties With The Product, Please Contact Us Promptly And We Will Provide You With A Satisfactory Answer Within 24 Hours..
[Wide Range Of Applications]: Perfect For Tents, Cabins, Sheds, Boathouses, Garages, And Other Places Where Flue Outlets Are Installed..
[Protect The Tent]: It Prevents The Hot Chimney Pipe From Coming Into Direct Contact With Your Tent Or Shelter With A Tight Seal At The Exit Of The Chimney Pipe, Or The Anti-Scald Stove Jack For The Wood Stove Pipe Inside The Tent, Which Prevents The Tent From Burning. Thick Rubber Folds And Stainless Steel Rings At The Bottom Allow Them To Fit Any Roof Pitch Or Metal Profile..
Features
- [Heat Resistant]: Made of heat-resistant silicone and stainless steel, Federedevo Flashers secure the flashing kit to the stove jack or outlet of a tent or shelter. The flexible silicone allows for expansion, contraction, and pipe vibration so it won't crack easily.
- [Protect the Tent]: It prevents the hot chimney pipe from coming into direct contact with your tent or shelter with a tight seal at the exit of the chimney pipe, or the anti-scald stove jack for the wood stove pipe inside the tent, which prevents the tent from burning. Thick rubber folds and stainless steel rings at the bottom allow them to fit any roof pitch or metal profile.
- [Easy Installation]: Federedevo Flashers come with their nuts for easy attachment to a variety of tents. You can also easily customize the right size with scissors.
- [Wide Range of Applications]: Perfect for tents, cabins, sheds, boathouses, garages, and other places where flue outlets are installed.
- [100% Guarantee]: If you have any questions or difficulties with the product, please contact us promptly and we will provide you with a satisfactory answer within 24 hours.
- See more on Amazon...
Brand: Federedevo | Manufacturer: Federedevo
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.76 pounds
See On Amazon #6
Stove Jack Kit for Tent - High Temp Silicone Pipe Boot Flashing Roof Flue Kit for Stove, Yurt, Frontier, Compatible with Triple Wall Pipe Sections
Asin: B0BL2V1KN1 | Model: 24-0661 | PartNumber: 24-0661 | Ean: 6975370687400
ăProtect Your TentăThe Tent Stove Flashing Kit Ideal For Use With Three-Wall Pipe Sections To Prevent Hot Chimney Pipes From Directly Contacting Your Tent Or Shelter And Provide A Tight Seal Around The Chimney Pipe At The Exit Point, Which Prevents The Tent From Burning..
ăWidely ApplicationăThick Rubber Folds And Stainless Steel Rings At The Bottom Allow Them To Fit Any Roof Pitch Or Metal Profile. Metal Stove Jack Kit For Tent Perfect For Car Bell Tents, Canopy Tents, Roof Tents, Sheds, Boats, Summer Houses, Workshops, Garages And Anything Else That Requires An Exit Flue..
ăEasy To InstallăTent Stove Pipe Flashing Installation Is Very Simple.First Customize The Right Size With Scissors,Cut The Corresponding Chimney Pipe, And Then Unscrew The Screws And Nuts On The Base To Fix It At The Place Where It Needs To Be Installed For Simple Installation And Disassembly..
ăHigh Temperature ResistantăThe Tent Flue Flashing Kit For Bell Tent Made Of Heat Resistant Silicone Stainless Steel Ring And Nut. Silica Gel Has Good Temperature Resistance And Flexible, Allowing Expansion, Contraction And Pipeline Vibration.The Adjustable Stainless Steel Ring At The Bottom Enables It To Adapt To Any Roof Slope Or Tent Chimney Pipe..
Features
- Product Dimension Fits Pipes with outside pipe diameter: 1 3/4""-3 1/4"" (45~85mm, over 4.5 cm, you will need to cut your own rubber ring). The base diameter: 160mm. Please confirm the size of the chimney pipe base before purchasing.
- High Temperature Resistant The tent flue flashing kit for bell tent made of heat resistant silicone stainless steel ring and nut. Silica gel has good temperature resistance and flexible, allowing expansion, contraction and pipeline vibration.The adjustable stainless steel ring at the bottom enables it to adapt to any roof slope or tent chimney pipe.
- Protect Your Tent The tent stove flashing kit ideal for use with three-wall pipe sections to prevent hot chimney pipes from directly contacting your tent or shelter and provide a tight seal around the chimney pipe at the exit point, which prevents the tent from burning.
- Easy to Install Tent stove pipe flashing installation is very simple.First customize the right size with scissors,cut the corresponding chimney pipe, and then unscrew the screws and nuts on the base to fix it at the place where it needs to be installed for simple installation and disassembly.
- Widely Application Thick rubber folds and stainless steel rings at the bottom allow them to fit any roof pitch or metal profile. Metal stove jack kit for tent perfect for car bell tents, canopy tents, roof tents, sheds, boats, summer houses, workshops, garages and anything else that requires an exit flue.
- See more on Amazon...
Brand: ikare | Manufacturer: ikare
Dimensions: 3.49 x 6.30 x 6.30 inches | Weight: 0.79 pounds
See On Amazon #7
VANFOND Canvas Bell Tent, Yurt Tent with Stove Jack, Waterproof and Breathable Wall Tent, Glamping Tent, Detachable Groundsheet for Camping Party (Beige with Black mesh, 13.1ft(4m))
Asin: B0CY4746GC
đïžăBell Tent With Stove JackăOur Glamping Tent Is Not Only Waterproof But Also Highly Breathable, Ensuring A Comfortable And Dry Camping Experience In Any Weather. The 5'' Stove Jack On The Top Made From Fire Retardant Material, Ensuring Safety During Heating And Won't Take Too Much Space..
đïžăEasy To InstallăOur 4 Season Tent Is Designed For Effortless Set-Up, Allowing You To Spend Less Time On Preparation And More Time Enjoying The Great Outdoors. With Just 25 Minutes, You Can Have The Tent Ready To Use, Ensuring A Hassle-Free Camping Experience..
đïžăVersatile 2-In-1 Designă The Detachable Groundsheet And Roll-Up Walls Offer 360-Degree Visibility And Airflow, Allowing You To Enjoy The Breeze And Stunning Views Under The Sun. This 4 Person Tent Is Suitable For Use In Gardens, Lawns, Forest Camps, And Is Perfect For Both Summer And Winter Camping, Luxurious Glamping, Park Activities, And Festivals..
đïžăComplete PackageăOur Yurt Tent Comes With A High-Quality Sewn-In Pvc Groundsheet, A 5'' Wide Stove Jack Opening, Standard Mesh Door, 4 Windows And Roof Vents To Increase Air Circulation, Galvanized Steel Center Pole And A-Frame Pole. Additionally, The Canvas Tent Comes With A Tool Kit That Includes Stakes, Pegs, A Rain Cap, And A Rubber Mallet..
Features
- Spacious Space With diameter 13.1ft(4M)/door height 5ft(1.5m)/top height 8.2ft(2.5m)/side wall 23.6in(60cm),you're able to fit a queen bed and two blow-up mattresses, the bell tent still has plenty of room to walk around.
- Complete Package Our yurt tent comes with a high-quality sewn-in PVC groundsheet, a 5'' wide stove jack opening, standard mesh door, 4 windows and roof vents to increase air circulation, galvanized steel center pole and A-frame pole. Additionally, the canvas tent comes with a tool kit that includes stakes, pegs, a rain cap, and a rubber mallet.
- Bell tent with Stove Jack Our glamping tent is not only waterproof but also highly breathable, ensuring a comfortable and dry camping experience in any weather. The 5'' stove Jack on the top made from fire retardant material, ensuring safety during heating and won't take too much space.
- Versatile 2-in-1 Design The detachable groundsheet and roll-up walls offer 360-degree visibility and airflow, allowing you to enjoy the breeze and stunning views under the sun. This 4 person tent is suitable for use in gardens, lawns, forest camps, and is perfect for both summer and winter camping, luxurious glamping, park activities, and festivals.
- Easy to install Our 4 season tent is designed for effortless set-up, allowing you to spend less time on preparation and more time enjoying the great outdoors. With just 25 minutes, you can have the tent ready to use, ensuring a hassle-free camping experience.
- See more on Amazon...
Brand: VANFOND | Manufacturer: VANFOND
Dimensions: 118.11 x 196.90 x 196.90 inches | Weight: 70.00 Pounds
Warranty: no
See On Amazon #8
AYAMAYA DIY Hot Tent Stove Jack - Stainless Steel Clip-On Stove Jack with 2.8" Chimney Hole for Canvas Tent, Bell Tent,Yurt Tent, Hassle-free Fireproof Tent Protector for Winter Camping - 7.5" x 9.8"
Asin: B0CLNHVB61
Universal Size: The Entire Stove Jack Measures 7.5" X 9.8" With A Built-In 3.5" X 3" Hole, Suitable For Chimney Diameters Up To 2.8". It Weighs 1.2 Pounds And Won't Significantly Alter The Tent's Shape After Installation..
Widely Available: The Clip-On Stove Jack Doesn't Require Any Additional Tent Modifications, Making It Highly Adaptable. You Can Choose Any Tent Model And Convert It Into A Hot Tent Without Causing Damage To The Tent..
Durable And Fire Safety: The Stove Jack Is Made Of Stainless Steel, Ensuring It Is Fire-Safe And Durable. It Incorporates A Hollow Design Around The Chimney Area For Efficient Heat Dispersion. Nevertheless, It Remains Essential To Handle It With Care When Removing It..
Easy Installation: The Stove Jack Features Four Clips That Can Be Directly Attached To Any Opening On The Tent, Such As A Charging Port Or A Zipper Opening. This Ensures Easy Installation Without Causing Any Damage To The Tent, Making It Highly Convenient..
Features
- Chimney Hole: The DIY hot tent stove jack comes with a built-in 3.5" x 3" hole, allowing the chimney to pass through directly without the need for additional drilling.
- Easy Installation: The stove jack features four clips that can be directly attached to any opening on the tent, such as a charging port or a zipper opening. This ensures easy installation without causing any damage to the tent, making it highly convenient.
- Universal Size: The entire stove jack measures 7.5 x 9.8 with a built-in 3.5 x 3 hole, suitable for chimney diameters up to 2.8. It weighs 1.2 pounds and won't significantly alter the tent's shape after installation.
- Durable and Fire Safety: The stove jack is made of stainless steel, ensuring it is fire-safe and durable. It incorporates a hollow design around the chimney area for efficient heat dispersion. Nevertheless, it remains essential to handle it with care when removing it.
- Widely Available: The clip-on stove jack doesn't require any additional tent modifications, making it highly adaptable. You can choose any tent model and convert it into a hot tent without causing damage to the tent.
- See more on Amazon...
Brand: ayamaya
Dimensions: 0.10 x 9.80 x 7.50 inches | Weight: 1.20 pounds
See On Amazon #9
RXQNN Fire Retardant 4.5" Stove Jack Kit for Tent with Rain Cover, Canvas Stove Jack for Canvas Tent Camping
Asin: B0BNJ693PM | Model: ST001-5 | PartNumber: ST001-5 | Ean: 8009301861473
ăReasonable Designă : The Stove Jack Kit For Tent Comes With Rain Cover ,You Can Roll Up The Flap With Loop .It's Convenient To Close It With The Velcro When You Needn't Use The Stove Jack..
ăEasy To Useă : Choose The Location To Open The Hole According To Your Own Needs,And Stitch Or Glue The Stove Jack To Your Tent..
ăMultifunctională : You Can Use This Item As A Canvas Stove Jack Or Wire Port As You Like..
ă4.5" Stove Jackă : The Size Of The Whole Stove Jack Kit Is 15"*15.6" , And The Fire-Retardant Hole Size Is 4.5"*6"..
Features
- Excellent Material : The main body and rain cover of the tent stove jack is made of 280g water resistant canvas and the sliver gray stove hole is made of fire retardant fireberglass which can hold up 572 degree temperature.
- 4.5 Stove Jack : The size of the whole stove jack kit is 15*15.6 , and the fire-retardant hole size is 4.5*6.
- Reasonable Design : The stove jack kit for tent comes with rain cover ,you can roll up the flap with loop .It's convenient to close it with the velcro when you needn't use the stove jack.
- Multifunctional : You can use this item as a canvas stove jack or wire port as you like.
- Easy to Use : Choose the location to open the hole according to your own needs,and stitch or glue the stove jack to your tent.
- See more on Amazon...
Brand: RXQNN
Dimensions: 15.30 x 14.10 x 0.11 inches
See On Amazon #10
Preself Hot Tent Stove Jack, 14" x 10", Suitable for T1 T2 T3, Flame Retardant for Wood Burning Stove
Asin: B0BJ85HKV1 | Model: SJ1 | PartNumber: SJ1 | Ean: 0716172443728 | UPC: 716172443728
ăPre-Cut HoleăPre-Cut Elliptical Hole Is Suitable For 6 Cm Diameter Stove Pipe, And Let The Stove Pipe Fit The Tent Incline Plane. Also Fit Stove Pipe Diameter Up To 15 Cm, But Need To Cut A Hole By Yourself..
ăDimensionă 14" X 10" (36 X 26 Cm). Hole Diameter Is 6.5 Cm. Weight: 2.4Oz (68G).
ăReplaceableăBorder Decorated Velcro. Just Take Off Stove Jack From Hot Tent Easily When It Damaged..
ăSafety FirstăWe Know How High Temperature Of The Pipe And How Dangerous They Are. We Choose Fire Retardant Material Seriously. Only Use High-Quality Fabric Made This Stove Jack..
Features
- HOT TENT STOVE JACK Stove jack can avoid hot flue pipe burn the tent. It is necessities when use firewood stove in hot tent. This stove jack is replacement for Preself hot tents (Model: T1, T2, T3 etc)
- SAFETY FIRST We know how high temperature of the pipe and how dangerous they are. We choose fire retardant material seriously. Only use high-quality fabric made this stove jack.
- PRE-CUT HOLE Pre-cut elliptical hole is suitable for 6 cm diameter stove pipe, and let the stove pipe fit the tent incline plane. Also fit stove pipe diameter up to 15 cm, but need to cut a hole by yourself.
- REPLACEABLE Border decorated velcro. Just take off stove jack from hot tent easily when it damaged.
- DIMENSION 14 x 10 (36 x 26 cm). Hole diameter is 6.5 cm. Weight: 2.4oz (68g)
- See more on Amazon...
Brand: Preself
Dimensions: 0.08 x 14.00 x 10.00 inches | Weight: 0.15 pounds
See On Amazon #11
DANCHEL OUTDOOR Canvas Stove Jack with Flap for Fire Resistant Seal Hole for Canvas Wall Tent Camping, Hot Tent Stove Jack Kit for Chimney Accessories
Asin: B0BM45GWLC | Ean: 0725320877735 | UPC: 725320877735
Waterproof:Velcro Design With Rain Flap Closes Securely. Durable And Waterproof Enough. Cover The Hole When You Do Not Want To Use The Stove. Note: This Product Is High Temperature Resistance But Not Fireproof. Always Take Caution When Starting Fires In The Outdoors..
4 Season Using: In Winter,You Can Set A Stove With Stove Jack To Warm Your Tent. In Summer,You Can Install It On The Side Wall Of You Canvas Tent For Connecting Electric Inlet Or A/C Pipe To Keep Cool.Nice Camping Accessories For Keeping Tent From Damaged..
Flame-Retardant:Gray Fabric-- High Temperature Resistance Fiberglass With Waterproof Pu Coating. Keep Working In A Certain Temperature Range. Protect Your Tent Fabric Well When You Use The Stove..
Easy To Cut: The Stove Jack Is Design With 3.85â Or 5.7â Pattern On It. ItâS Not Pre-Cut As Stove Pipe Comes In Different Sizes Or There Will Be Too Much Of A Gap Or Not Enough Gap So We Leave It Up To You To Cut It As Per Your Convenience.Note: The Glassfiber Is Rough. Please Wear Pvc Gloves In Package When You Process..
Features
- CUSTOMER THE DIAMETER:You can DIY the diameter(less than 7.87'') to match your stove well. The size of the whole canvas stove jack is 17.7x19.69''.(Have the extra canvas around the outside to glue and sew in).Grey rectangle size:9.4x11.8 inch. Thickness: About four A4 papers
- EASY TO CUT: The stove jack is design with 3.85 or 5.7 pattern on it. It s not pre-cut as stove pipe comes in different sizes or there will be too much of a gap or not enough gap so we leave it up to you to cut it as per your convenience.NOTE: The glassfiber is rough. Please wear PVC gloves in package when you process.
- WATERPROOF:Velcro design with rain flap closes securely. Durable and waterproof enough. Cover the hole when you do not want to use the stove. Note: This product is high temperature resistance but NOT fireproof. Always take caution when starting fires in the outdoors.
- FLAME-RETARDANT:Gray fabric-- High temperature resistance fiberglass with waterproof PU coating. keep working in a certain temperature range. Protect your tent fabric well when you use the stove.
- 4 SEASON USING: In winter,you can set a stove with stove jack to warm your tent. In summer,you can install it on the side wall of you canvas tent for connecting electric inlet or A/C pipe to keep cool.Nice camping accessories for keeping tent from damaged.
- See more on Amazon...
Brand: DANCHEL OUTDOOR | Manufacturer: DANCHE OUTDOOR
See On Amazon #12
RXQNN Silicone Tent Stove Jack Kit Fitting Pipe OD 3" to 6-1/4", Wood Stove Pipe Kit Flexible High Temp Stove Jack Kit for Bell Tent/Yurt/Wood Burner
Asin: B0CX46NNCL | Ean: 8009301861350
Cuttable Stove Hole : Both The Front And Back Sides Are Respectively Printed With Inch And Cm Size,You Can Cut The Hole According To Your Demand.The Cuttable Stove Hole Can Adapt To Different Pipe Diameter,Pls Remember To Measure Your Stove Pipe Before Your Purchase The Tent Stove Jack Kit..
Widely Application : Compatible With Most Camping Tent Jack Chimney Pipes, The Tent Stove Jack Is Suitable For Bell Tents, Tipi Tents, Yurts.It Can Also Be Used In Greenhouse,Workshop,Boat,Stove And So On..
Easy Installation : The Stove Jack Kit Is Easy To Be Fixed To The Tent Or Other Places Due To The Nuts,You Just Need To Customize The Right Size With Scissors,Cut The Corresponding Chimney Pipe, And Then Unscrew The Screws And Nuts On The Base To Fix It At The Place Where It Needs To Be Installed..
Heat Resistant Material: Combined With High Temp And Stainless Steel,The Flue Flashing Kit Is Heat Resistant,Not Easy To Burn And Melt..
Features
- Effective Protection : The heat resistant tent stove jack kit is designed to prevent the hot stove pipe from touching the tent directly,which reduce the probability of fire during the camping .
- Heat Resistant Material: Combined with high temp and stainless steel,the flue flashing kit is heat resistant,not easy to burn and melt.
- Cuttable Stove Hole : Both the front and back sides are respectively printed with inch and cm size,you can cut the hole according to your demand.The cuttable stove hole can adapt to different pipe diameter,pls remember to measure your stove pipe before your purchase the tent stove jack kit.
- Easy Installation : The stove jack kit is easy to be fixed to the tent or other places due to the nuts,you just need to customize the right size with scissors,cut the corresponding chimney pipe, and then unscrew the screws and nuts on the base to fix it at the place where it needs to be installed.
- Widely Application : Compatible with most camping tent jack chimney pipes, the tent stove jack is suitable for bell tents, tipi tents, yurts.It can also be used in greenhouse,workshop,boat,stove and so on.
- See more on Amazon...
Brand: RXQNN
Dimensions: 1.97 x 6.30 x 6.30 inches
See On Amazon #13
TAISOCA DIY Stove Jack 7.9 * 9inch Hot Tent Stove Jack Stove Jack Kit for Tent Outdoor Stove Jack with Rain Flap
Asin: B0BYVJMJSG | Model: 005 | PartNumber: 005
ăHigh Quality MaterialăThe Stove Jack Is Made Of Silicone Fiberglass Material, Which Is Fireproof And High Temperature Resistant. It Is Flame Retardant Up To 572°F / 300°C. The Fire-Proof Cloth That Touches The High-Temperature Stove Pipe Will Carbonize And Turn Black, But It Will Not Catch Fire..
ăEasy To UseăThe Stove Jack Is Fixed With Velcro For Easy Installation And Replacement..
ăCutableăThe Stove Jack Can Be Cut Freely. According To The Diameter Of The Furnace Tube Used, The Stove Jack Can Be Cut Into A Suitable Circle Or Crossed "X" Shaped Jack..
ăDouble-Layer DesignăThe Stove Jack Has A Double-Layer Design. When It Rains, The Upper Cover Can Be Put Down To Prevent Rainwater From Flowing Into The Tent..
Features
- Size The stove jack is 23cm/9 inches in length and 20cm/7.8 inches in width.
- Double-layer design The stove jack has a double-layer design. When it rains, the upper cover can be put down to prevent rainwater from flowing into the tent.
- High Quality Material The stove jack is made of silicone fiberglass material, which is fireproof and high temperature resistant. It is flame retardant up to 572 F / 300 C. The fire-proof cloth that touches the high-temperature stove pipe will carbonize and turn black, but it will not catch fire.
- Cutable The stove jack can be cut freely. According to the diameter of the furnace tube used, the stove jack can be cut into a suitable circle or crossed X shaped jack.
- Easy to use The stove jack is fixed with Velcro for easy installation and replacement.
- See more on Amazon...
Brand: TAISOCA | Manufacturer: TAISOCA
Dimensions: 0.39 x 9.06 x 7.87 inches | Weight: 0.02 pounds
See On Amazon #14
SoloWilder Fireproof Stovepipe Webbing Flue Wrap Hot Tent Stove Jack Protector with 2 Clamps 5 m/16.4 ft
Asin: B09YRBFB42 | Model: Tai Stovepipe Webbing | PartNumber: Tai Stovepipe Webbing
Simple Installation: After Wrapping The Chimney Tube With Webbing, Use The Clamp To Fix The Webbing..
Diy: You Can Cut The Length Of The Flue Tube According To Your Own Needs So That The Chimney Protector Can Reach The Most Suitable Length..
High-Temperature Resistance: Flue Tube Webbing Can Withstand Temperatures Ranging From -54°C (-65.2°F) To 550°C (1022°F)..
New Material: The Chimney Webbing Is Made Of High-Temperature And Fire-Resistant Webbing With A Total Length Of 5 M/16.4 Ft..
Features
- Stove Tube Protector: The fireproof webbing can be wrapped around the chimney tube to protect the flue tube and prevent the high-temperature chimney tube from burning your hands.
- New Material: The chimney webbing is made of high-temperature and fire-resistant webbing with a total length of 5 m/16.4 ft.
- Simple Installation: After wrapping the chimney tube with webbing, use the clamp to fix the webbing.
- High-Temperature Resistance: Flue tube webbing can withstand temperatures ranging from -54 C (-65.2 F) to 550 C (1022 F).
- DIY: You can cut the length of the flue tube according to your own needs so that the chimney protector can reach the most suitable length.
- See more on Amazon...
Brand: SoloWilder | Manufacturer: Tai Stovepipe Webbing
See On Amazon #15
Solowilder Tent Stove Jack with Rain Flap Fire Resistant for Canvas Hot Tent Camping
Asin: B0B3XL8L46 | Model: DIY Stove Jack | PartNumber: DIY Stove Jack
Diy - Choose The Location To Open The Hole According To Your Own Needs, And Then Stitch The Stove Jack To The Tent..
Appropriate Size - The Stove Jack Can Be Applied To Most Camping Tents On The Market, And The Installation Location Is Determined According To The Actual Situation..
Velcro - The Stove Jack Is Designed With Removable Velcro. This Is Conducive To The Replacement Of The Chimney Cloth After Damage And Prolongs The Service Life..
Special Design - The Rain Flap Design Can Prevent Rainwater From Entering The Inside Of The Hot Tent..
Features
- MATERIAL - The outer stove jack is produced with TC cotton cloth as the raw material, and the built-in stove jack cloth is mainly made of glass fiber.
- SPECIAL DESIGN - The rain flap design can prevent rainwater from entering the inside of the hot tent.
- DIY - Choose the location to open the hole according to your own needs, and then stitch the stove jack to the tent.
- VELCRO - The stove jack is designed with removable Velcro. This is conducive to the replacement of the chimney cloth after damage and prolongs the service life.
- APPROPRIATE SIZE - The stove jack can be applied to most camping tents on the market, and the installation location is determined according to the actual situation.
- See more on Amazon...
Brand: SoloWilder | Manufacturer: DIY Stove Jack
Dimensions: 0.39 x 15.35 x 12.60 inches | Weight: 0.31 Pounds
See On Amazon #16
FLASLD Tent Stove Jack 12" 12" with 4-6inch Expandable Hole, Black Fireproof Camping Stove Jack Kit for Canvas Tent
Asin: B09L86NW2P | Model: Tent stove jack | PartNumber: Tent stove jack | Ean: 0769307715054 | UPC: 769307715054
đ„ăExpandable Openingă- The Stove Jacket Adopts An Expandable Opening, Which Can Accommodate Pipes With A Diameter Of Less Than 15Cm, And A Reinforced Coil Is Sewn On The Periphery Of The Opening To Make The Opening Not Easy To Tear..
đ„ăWarm Tipsă- Please Do Not Burn The Protection Ring Directly, The Main Function Of It Is To Prevent The Tent From Being Burned..
đ„ăAvoid Tent Burningă- Measuring 12 Inches Long And * 12 Inches Wide, This Stove Jack Kit Is Designed For Firewood Stove Tents, Suitable For Hot Chimney Tunnels..
đ„ăHighly Flame-Retardantă- The Hot Tent Stove Jack Uses Highly Flame-Retardant Silicone Glass Fiber Material (Up To 572°F/300°C)..
Features
- FLASLD STOVE TENTS JACK -The anti-scalding stove jack for the firewood stove tube in the tent can prevent the tent from being burned and greatly increase its life. It is highly recommended to use it in conjunction with the firewood tent.
- HIGHLY FLAME-RETARDANT - The hot tent stove jack uses highly flame-retardant silicone glass fiber material (up to 572 F/300 C).
- Expandable opening - The stove jacket adopts an expandable opening, which can accommodate pipes with a diameter of less than 15cm, and a reinforced coil is sewn on the periphery of the opening to make the opening not easy to tear.
- AVOID TENT BURNING - Measuring 12 inches long and * 12 inches wide, this stove jack kit is designed for firewood stove tents, suitable for hot chimney tunnels.
- WARM TIPS - Please do not burn the protection ring directly, the main function of it is to prevent the tent from being burned.
- See more on Amazon...
Brand: FLASLD
Dimensions: 0.08 x 12.00 x 12.00 inches | Weight: 0.20 pounds
See On Amazon #17
UVIKTE DIY Hot Tent Stove Jack - Stainless Steel Clip-On Stove Jack with 4.14" Chimney Hole for Canvas Tent, Bell Tent,Yurt Tent, Hassle-free Fireproof Tent Protector for Winter Camping
Asin: B0CM6YCXLR | Model: stove jack kit for tent | PartNumber: stove jack kit for tent
đ„Durable And Fireproof: Made Of Stainless Steel, Our Stove Jack Guarantees Both Fire Resistance And Durability. It Features A Hollow Design Around The Chimney Area For Effective Heat Dissipation. However, Caution Should Still Be Exercised When Disassembling It..
đ„Reliable After-Sales Support: Our Diy Hot Tent Stove Jack Comes With A Dedicated After-Sales Team, Ready To Provide Prompt Assistance And Resolve Any Issues Or Concerns You May Have. We Are Committed To Ensuring Your Satisfaction With Our Product..
đ„Versatile Use: The Clamp-Style Stove Jack Requires No Additional Tent Modification, Making It Highly Adaptable. You Can Choose Any Tent Model And Conveniently Convert It Into A Hot Tent Without Causing Any Damage..
đ„Universal Size: With A Dimension Of 14.96" X 11.8" And A Built-In 4.13" Diameter Round Hole, Our Stove Jack Kit Is Compatible With Chimneys Up To 4.13" In Diameter. It Weighs Only 1.2 Pounds And Does Not Significantly Alter The Shape Of Your Tent Once Installed..
Features
- Easy Installation: Our DIY Hot Tent Stove Jack comes with four clamp clips that allow for direct connection to any opening in your tent, such as charging ports or zipper openings. This ensures a hassle-free installation without causing any damage to your tent.
- Universal Size: With a dimension of 14.96 x 11.8 and a built-in 4.13 diameter round hole, our stove jack kit is compatible with chimneys up to 4.13 in diameter. It weighs only 1.2 pounds and does not significantly alter the shape of your tent once installed.
- Durable and Fireproof: Made of stainless steel, our stove jack guarantees both fire resistance and durability. It features a hollow design around the chimney area for effective heat dissipation. However, caution should still be exercised when disassembling it.
- Versatile Use: The clamp-style stove jack requires no additional tent modification, making it highly adaptable. You can choose any tent model and conveniently convert it into a hot tent without causing any damage.
- Reliable After-Sales Support: Our DIY Hot Tent Stove Jack comes with a dedicated after-sales team, ready to provide prompt assistance and resolve any issues or concerns you may have. We are committed to ensuring your satisfaction with our product.
- See more on Amazon...
Brand: UVIKTE | Manufacturer: UVIKTE
Dimensions: 0.20 x 0.20 x 0.20 inches | Weight: 0.40 Pounds
Warranty: 1 YEAR WARRANTY
See On Amazon #18
Tent Stove Jack Kit, Bell Tent Flue Flashing High Temp Flexible Pipe Flashing Compatible with Frontier Outbacker Stove Triple Wall Pipe Sections
Asin: B0CJRZNKNM | Model: Tent Stove Jack Kit | PartNumber: Tent Stove Jack Kit
ăSimple InstallationăFirst Cut The Corresponding Chimney Pipe, And Then Unscrew The Screws And Nuts On The Base To Fix It At The Place Where It Needs To Be Installed For Simple Installation And Disassembly..
ăNoteă:Applicable To Chimney: 4.5-10Cm (More Than 4.5Cm, You Need To Cut The Rubber Ring). Attest To The Fact The Size Of The Chimney Pipe Base Before Purchasing..
ăWidely UsedăCompatible With Most Camping Tent Jack Chimney Pipes, Suitable For Bell Tents, Outdoor Tents, Flue Flash Kits For Stoves, Greenhouses, Boats, Recreational Vehicles, Yurt, Cabins, Summer Houses, Workshops, Garages And Other Places Where Flue Exits Are Required..
ăCraftsmanshipăThe Tent Stove Jack Made Of High-Quality Silica Gel, Which Has Good Temperature Resistance, Will Not Break Due To High Temperature, And Is Flexible, Allowing Expansion, Contraction And Pipeline Vibration. The Adjustable Stainless Steel Ring At The Bottom Enables It To Adapt To Any Roof Slope Or Tent Chimney Pipe..
Features
- Tent Stove Jack Kit Cuttable tent stove jack kit that can be quickly installed in a fixed position, for example, in the kitchen, in the vent, on the tent.
- Craftsmanship The tent stove jack made of high-quality silica gel, which has good temperature resistance, will not break due to high temperature, and is flexible, allowing expansion, contraction and pipeline vibration. The adjustable stainless steel ring at the bottom enables it to adapt to any roof slope or tent chimney pipe.
- Simple Installation First cut the corresponding chimney pipe, and then unscrew the screws and nuts on the base to fix it at the place where it needs to be installed for simple installation and disassembly.
- Widely Used Compatible with most camping tent jack chimney pipes, suitable for bell tents, outdoor tents, flue flash kits for stoves, greenhouses, boats, recreational vehicles, yurt, cabins, summer houses, workshops, garages and other places where flue exits are required.
- Note :Applicable to chimney: 4.5-10cm (more than 4.5cm, you need to cut the rubber ring). Attest to the fact the size of the chimney pipe base before purchasing.
- See more on Amazon...
Brand: Canlaten·U | Manufacturer: Canlaten·U
Dimensions: 2.00 x 6.30 x 6.30 inches | Weight: 0.77 Pounds
See On Amazon #19
B Baosity Silicone Tent Stove Jack High Temp
Asin: B0BX7B17F8
Size: Base Diameter Is 9Inch, Fit 3" To 5.25" Outside Pipe Diameter..
Detail: The Anti Scalding Stove Jack For The Firewood Stove Tube In The Tent Can Prevent Tent From Being Burned..
Application: Pipe Stove Vent Accessories, Easy To Fix To A Tent. This Tent Flashing Kits Suitable For Greenhouses, Cabins, Sheds And Boats,Sheds, Boats, Boat Houses,.
Material: Tent Flue Flashing Tools, Made Of Silicone And Stainless Steel, Resistant To High Temperature, Wear Resistance, Very , Exquisite Workmanship.
Features
- FEATURE: The tent flashing allows you to modify your tent for use with a travel stove, allowing you to safely vent the fumes outside.
- MATERIAL: Tent Flue Flashing Tools, Made of silicone and stainless steel, resistant to high temperature, wear resistance, very , exquisite workmanship
- Size: Base diameter is 9inch, Fit 3 to 5.25 outside pipe diameter.
- APPLICATION: Pipe Stove Vent Accessories, Easy to fix to a tent. this tent flashing kits suitable for greenhouses, cabins, sheds and boats,sheds, boats, boat houses,
- DETAIL: The anti scalding stove jack for the firewood stove tube in the tent can prevent tent from being burned.
- See more on Amazon...
Brand: B Baosity | Manufacturer: B Baosity
See On Amazon ï»ż
Looking For Something Else?
Search