RACOONA 3 Claw Bearing Puller,Car Accessories Adjustable Pilot Pulley Puller Tool Pilot Small Bearing Puller Blind Bearing Puller Set,Automotive Tool Wheel Pilot Bearing Removal Tool for Car
Asin: B0CMQ871MD | Model: 1153SZNGZCSXGJ001 | PartNumber: 1153SZNGZCSXGJ001
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[High Tensile Force]The Bearing Puller Has A Sturdy Structure, Providing You With Positive Tension, High Torque, And High Toughness. As Long As The Small Wrench Is Slightly Turned, It Will Generate A Large Pulling Force, Which Is Flexible And Convenient, Ensuring Time-Saving And Labor-Saving Use. Stretch Range: 50-95Mm/2.0-3.7 Inches..
[Widely Applicable] The 3-Jaw Guide Bearing Puller Is Suitable For All Sleeve Bearings With An Inner Diameter Of 1/2 "-2". Widely Used In Automotive Bearings, Motorcycle Electric Vehicle Bearings, Mechanical Bearings, Agricultural Machinery, Etc..
[Easy To Use] This Bearing Puller Has Two Installation Methods, Positive And Negative, Making It Easy To Operate And Use. Attention: Please Maintain Balance When Using To Avoid Damaging The Hook Rod. If The Bearing Rusts, It Cannot Be Used..
[Three Claw Design] The Three Claw Design Can Apply Uniform Pressure, Effectively Preventing Sliding And Bearing Damage, And Ensuring The Stability Of The Bearing Puller During Use..
Features
- [High Quality Materials]The puller is made of carbon steel material, with a black oxide surface and corrosion resistance. Even under harsh conditions, it can ensure service life and reliability, and is durable.
- [Three Claw Design] The three claw design can apply uniform pressure, effectively preventing sliding and bearing damage, and ensuring the stability of the bearing puller during use.
- [High Tensile Force]The bearing puller has a sturdy structure, providing you with positive tension, high torque, and high toughness. As long as the small wrench is slightly turned, it will generate a large pulling force, which is flexible and convenient, ensuring time-saving and labor-saving use. Stretch range: 50-95mm/2.0-3.7 inches.
- [Easy to Use] This bearing puller has two installation methods, positive and negative, making it easy to operate and use. Attention: Please maintain balance when using to avoid damaging the hook rod. If the bearing rusts, it cannot be used.
- [Widely Applicable] The 3-jaw guide bearing puller is suitable for all sleeve bearings with an inner diameter of 1/2 -2. Widely used in automotive bearings, motorcycle electric vehicle bearings, mechanical bearings, agricultural machinery, etc.
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
Warranty: no
See On Amazon Similar To RACOONA 3 Claw Bearing PullerCar
#1
Bearing Puller Set, 5 Ton Capacity Bearing Separator, Pinion Wheel Bearing Removal Kit with 2" and 3" Jaws, Wheel Hub Axle Puller Set, Heavy Duty Bearing Splitter Tool Kit with Blue Case
Asin: B07GSM7N37 | Model: 13 | PartNumber: 13
Wide Application: The 2 Bearing Splitter Jaws’ 5 Ton Capacity Ensures They Stand Up To Punishing Use; Suitable For Professionals And Home Mechanics And Compatible With Most Vehicles, Atvs, And Light Trucks.
Durable Construction: Constructed From Heat Treated Cr-V Steel With Black Oxide Finish, This Pinion Bearing Puller Set Ensures Corrosion Resistance And Long-Term Durability Under Even Punishing Use.
Effective Operation: The Knife Like Taper Feature Allows The Jaws To Get Behind Bearings To Securely Grip Any Bearing; The Included Tools Enable You To Reach And Remove Bearings In Tight Spaces Effectively.
All-In-One Tool Kit: Our Bearing Separator Set Includes A 3" Bearing Separator Jaw, 2" Bearing Separator Jaw, 6" Yoke, 6-1/4" Forcing Screw, Four 4" Extension Screws, Four 5" Extension Screws, And Two 4-1/2" L-Type Legs.
Features
- VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels
- ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3 bearing separator jaw, 2 bearing separator jaw, 6 yoke, 6-1/4 forcing screw, four 4 extension screws, four 5 extension screws, and two 4-1/2 L-type legs
- WIDE APPLICATION: The 2 bearing splitter jaws 5 ton capacity ensures they stand up to punishing use; suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks
- EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing; the included tools enable you to reach and remove bearings in tight spaces effectively
- DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 9.45 x 14.96 x 2.55 inches | Weight: 11.55 pounds
Warranty: 1 Year Warranty
See On Amazon #2
Orion Motor Tech Gear Puller Set, 3" 4" 6" 8" 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal, Heavy Duty Pulley Puller with Reversible Jaws 4 pcs Bearing Puller Tool Kit
Asin: B084SV21FP | Model: S00400 | PartNumber: S00400
3 Jaw Design: These Power Steering Pulley Pullers Bite Tightly Onto Your Components With Their Reinforced Jaws And Distribute Even Pulling Force To Remove Parts Without Causing Damage.
Tools For Mechanics: Drop-Forged And Heat-Treated Carbon Steel Builds With Corrosion Proof Coatings Ensure These Pullers Last For Resilient Service With Unrivaled Strength And Durability.
Reversible Jaws: Each Pulley Removal Tool Can Be Reversed To Pull Parts From Either The Inside Or Outside, With The 6" And 8" Gear Puller Provide 4 Configurations For A Sure Grip Thanks To Their Dual Fixing Holes.
Better Together: Our Bearing Puller Set Includes Four Puller Sizes, Offering Maximum Spreads Of 3", 4", 6", And 8" And Reaches Of 4.3", 5", 7.3", And 9.2" To Cover Most Applications.
Features
- UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts
- BETTER TOGETHER: Our bearing puller set includes four puller sizes, offering maximum spreads of 3, 4, 6, and 8 and reaches of 4.3, 5, 7.3, and 9.2 to cover most applications
- 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage
- REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6 and 8 gear puller provide 4 configurations for a sure grip thanks to their dual fixing holes
- TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 4.00 x 11.00 x 5.00 inches | Weight: 10.00 pounds
Warranty: 1 year
See On Amazon #3
Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS
Asin: B07BNMB42N | Model: 13 | PartNumber: 13
3.Wide Application: This Internal Bearing Puller Set's Expandable Collets And Threaded Screw Adapters Remove Tight And Jammed Axles, Bearings, And Bushings On A Wide Variety Of Vehicles Without Damaging The Removed Parts.
5.Blow-Molded Case: The Custom Blow-Molded Case Keeps Everything Organized And Easy To Carry Or Store As Needed.
4.Easy To Use: For Most Parts, Just Fit The Appropriate Collet, Lock It Into The Inner Race, And Pull The Slide Hammer's Weight Back To Easily Knock Out The Bearing Or Bushing; For Tighter Or More Delicate Operation, The Counterstay Can Be Slowly Tightened To More Carefully Extract The Part.
2.Heavy-Duty Construction: These Wheel Bearing Removal Tools Are Made From Aisi 1045 Medium Carbon Steel Forged And Galvanized For Long-Term Durability Under Even Punishing Use; The Collets In Particular Are Chromoly Steel To Handle Even The Most Stubborn Blind Bearings And Bushings Without Trouble.
Features
- 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)
- 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble
- 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts
- 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part
- 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 4.72 x 18.50 x 12.59 inches | Weight: 11.00 Pounds
Warranty: 2 Years Warranty, Free Replace or Full Refund
See On Amazon #4
Orion Motor Tech Bearing Puller Set, 5 Ton Capacity Bearing Separator, Pinion Wheel Bearing Removal Kit with 2" and 3" Jaws, Wheel Hub Axle Puller Set, Heavy Duty Bearing Splitter Tool Kit
Asin: B0B2DF6LXT | Model: N014-BL | PartNumber: N014-BL
3. Wide Application: The 2 Bearing Splitter Jaws’ 5 Ton Capacity Ensures They Stand Up To Punishing Use; Suitable For Professionals And Home Mechanics And Compatible With Most Vehicles, Atvs, And Light Trucks.
5. Durable Construction: Constructed From Heat Treated Cr-V Steel With Black Oxide Finish, This Pinion Bearing Puller Set Ensures Corrosion Resistance And Long-Term Durability Under Even Punishing Use.
4. Effective Operation: The Knife Like Taper Feature Allows The Jaws To Get Behind Bearings To Securely Grip Any Bearing; The Included Tools Enable You To Reach And Remove Bearings In Tight Spaces Effectively.
2. All-In-One Tool Kit: Our Bearing Separator Set Includes A 3" Bearing Separator Jaw, 2" Bearing Separator Jaw, 6" Yoke, 6-1/4" Forcing Screw, Four 4" Extension Screws, Four 5" Extension Screws, And Two 4-1/2" L-Type Legs.
Features
- 1. VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels
- 2. ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3 bearing separator jaw, 2 bearing separator jaw, 6 yoke, 6-1/4 forcing screw, four 4 extension screws, four 5 extension screws, and two 4-1/2 L-type legs
- 3. WIDE APPLICATION: The 2 bearing splitter jaws 5 ton capacity ensures they stand up to punishing use; suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks
- 4. EFFECTIVE OPERATION: The knife like taper feature allows the jaws to get behind bearings to securely grip any bearing; the included tools enable you to reach and remove bearings in tight spaces effectively
- 5. DURABLE CONSTRUCTION: Constructed from heat treated Cr-V steel with black oxide finish, this pinion bearing puller set ensures corrosion resistance and long-term durability under even punishing use
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Weight: 11.00 pounds
Warranty: 1 year
See On Amazon #5
DURATECH 3-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel
Asin: B08G8SR4XV | Ean: 0820909680826 | UPC: 820909680826
Each Of The Three 3-Jaw Gear And Bearing Pullers Can Be Reversed To Pull Parts From Either The Inside Or Outside. Universal 4-Position Reversible Jaws Offer An Inside Or Outside Grip With Short, Standard Reach..
Jaw Spread: 3In, Jaw Reach: 3-9/16In, Puller: 3T, Maximum Use Range: 75Mm. Perfect For You To Smoothly And Safely Slide Gear, Pulley, Bearing, And Flywheel Off The Shaft. Free Replacement Insures Your Duratech Wrenches Purchase Against Manufacturer Defects..
The Three-Jaw Design Balances The Pulling Force Well, And Claws Are Precisely Machined To Give A Non-Slip And Secure Grip On The Gears. Make It Deal For Pulling Work In Confined Areas..
Three Jaws Come With Fine Chrome Plating To Provide Reliable And Effective Rust And Corrosion Protection. The Drive Screw Is Covered By Black Phosphatizing, Which Provides Maximum Strength And Longevity To The Gear Puller, Puller Jaws Allow For Easy Gripping And Access To Tight Spaces. No Need To Assemble Yourself Is The Advantage Of Duratech..
Features
- Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.
- Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.
- Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4-position reversible jaws offer an inside or outside grip with short, standard reach.
- The three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas.
- Jaw Spread: 3in, Jaw Reach: 3-9/16in, Puller: 3T, Maximum use range: 75mm. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects.
- See more on Amazon...
Brand: DURATECH | Manufacturer: LONGYOU YIYANG IMPORT AND EXPORT CO.,LTD
See On Amazon #6
OEMTOOLS 27059 Pilot Bearing Puller Attachment For Slide Hammer, 2-Jaw Puller Pilot Bearing Removal Tool, Fits 5/8 x 18, 3/4 x 16 Thread Rods, Slide Hammer Extension Compatible With OEMTOOLS 27033
Asin: B004FDGU20 | Model: 27059 | PartNumber: 27059 | Ean: 0732454032794, 0076812270597 | UPC: 076812270597, 732454032794
Broad Applications: These Small Slide Hammer Attachments Are Essential Puller Tools For Mechanic Shops And Garages That Service Clutches And Transmissions.
Durable Make: Each Slide Hammer Bearing Puller Is Crafted With Premium Materials For Longevity; Dependable And Resilient For Repeated Bearing Separator Performance.
Slide Hammer Ready: Ensure Smooth And Effective Operations With A Complete Slide Hammer Puller Set; Designed For Optimal Performance With Oemtools 27033 Slide Hammer.
Precision Bearing Removal: Two-Jaw Puller Tool Inserts Perfectly Behind Bearings For Safe Extraction Using A Light Duty Slide Hammer; Minimize Hassle And Reduce Risk Of Injury Or Damage.
Features
- Adaptable Design: Fits 5/8" x 18-thread and 3/4" x 16-thread pulling rods; Seal puller removes bearings, bushings, and other press-fit parts from a shaft without causing damage to the components
- Precision Bearing Removal: Two-jaw puller tool inserts perfectly behind bearings for safe extraction using a light duty slide hammer; Minimize hassle and reduce risk of injury or damage
- Broad Applications: These small slide hammer attachments are essential puller tools for mechanic shops and garages that service clutches and transmissions
- Slide Hammer Ready: Ensure smooth and effective operations with a complete slide hammer puller set; Designed for optimal performance with OEMTOOLS 27033 Slide Hammer
- Durable Make: Each slide hammer bearing puller is crafted with premium materials for longevity; Dependable and resilient for repeated bearing separator performance
- See more on Amazon...
First Available: 09/26/2011
Brand: OEMTOOLS | Manufacturer: Great Neck Saw
Dimensions: 1.00 x 1.00 x 1.00 Inches | Weight: 0.85 Pounds
See On Amazon #7
Performance Tool W137P 6-Inch 3-Jaw Gear Puller with Reversible Design for Vehicle Maintenance and Repair, Drop-Forged Steel, Chrome Plating
Asin: B000V4FIRK | Model: W137P | PartNumber: W137P | Ean: 0039564101465, 0027077003987 | UPC: 027077003987, 039564101465
Drop Forged For Strength.
Durable Construction: Mig Welding; Industrial Grade Air Hose With Standard Tire Air Chuck.
Chrome Plated Finish.
Chrome Vanadium Jaws.
Features
- Heat treated center screw
- Chrome vanadium jaws
- Drop forged for strength
- Chrome plated finish
- DURABLE CONSTRUCTION: MIG welding; Industrial grade air hose with standard tire air chuck
- See more on Amazon...
First Available: 11/06/2019
Brand: Performance Tool | Manufacturer: Performance Tool
Dimensions: 3.30 x 8.80 x 4.30 inches | Weight: 0.53 Pounds
Warranty: Manufacturer Warranty
See On Amazon #8
OriGlam Two Jaws Bearing Puller/Remover, Adjustable Two Jaw Puller Tool, Bearing Puller Tool, Carbon Steel Pump Pulley Remover
Asin: B099K7KRCN | Model: HAD_B0I | PartNumber: HAD_B0I
√ Easy To Use - Use The Two Jaws To Catch The Bearing; Rotate The Mandrel With The Thread; Slowly Pull Out The Bearing Of The Shaft..
√ Widely Use - This 2 Jaw Bearing Puller Widely Use In Various Bearings That Are Not Easy To Disassemble. Can Also Be Used For Automotive Flywheel, Motorcycle Wheel,Scooter Motorcycle Bearing And Gear And So On..
√ Get Into Tight Hard-To-Reach Spots- This 2 Jaw Puller Tool Can Remove Bearing Or Gears, Pulleys And Flywheels Off A Shaft In Hard-To-Reach Spots Without Damage Your Application..
√ Adjustable - 2 Jaw Bearing Remover Can Adjust The Clamping Depth. Adjustable Diameter 30-80Mm. Have Reversible Claw Legs Make It Suitable For Use As An Internal Or External Bearing Puller. The Reasonable Design Of The Claw Will Not Fall Off When Force Is Applied..
Features
- High Quality - The 2 jaw bearing puller is made of high-strength and heat-treated chrome-vanadium steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.
- Adjustable - 2 jaw bearing Remover can adjust the clamping depth. Adjustable Diameter 30-80mm. have Reversible claw legs make it suitable for use as an internal or external bearing puller. The reasonable design of the claw will not fall off when force is applied.
- Easy to Use - Use the two jaws to catch the bearing; Rotate the mandrel with the thread; Slowly pull out the bearing of the shaft.
- Get into Tight Hard-To-Reach Spots- This 2 Jaw Puller Tool can remove bearing or gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application.
- Widely Use - This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Dimensions: 1.18 x 7.09 x 3.94 Inches
See On Amazon #9
OriGlam Adjustable Two Jaw Bearing Gear Puller Remover Tool, 2 Inch Carbon Steel Pump Removing Kit for Motorcycle
Asin: B07GFLBY1R | Model: AMT_002_1 | PartNumber: AMT_002_1 | Ean: 4895192453569
√ Adjust Screw Design And Convenient To Repaired Different Size Gears And Bearing..
√ Fit For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel , Car Wheel, Machine Wheel And So On..
√ Give You Positive Pulling Power To Remove Bearings Groove Pulleys On Alternator And Power Steering Pumps..
√ Special Heat Treatment Processing. Long Use Life..
Features
- Made of overall chromium vanadium steel, it is durable.
- Special heat treatment processing. Long use life.
- Adjust screw design and convenient to repaired different size gears and bearing.
- Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
- Fit for automotive flywheel, motorcycle wheel, bicycle wheel , car wheel, machine wheel and so on.
- See more on Amazon...
Brand: OriGlam | Manufacturer: OriGlam
Dimensions: 0.79 x 5.91 x 3.94 inches
See On Amazon #10
KOOPOOL 12-Piece Bearing Puller, Wheel Hub Puller Set, Wheel Bearing Removal Tool, Blind Bearing Puller, 5 Ton Capacity Bearing Separator with 2 and 3 Bearing Separator Jaws (R)
Asin: B09YCL6B4Z | Model: 2131CR | PartNumber: 2131CR | Ean: 0791126135324, 0793227880349 | UPC: 791126135324, 793227880349
【Premium Material】This Gear Puller Set Is Built With Rugged Drop-Forged Construction And Made Of Heat-Treated High Hardness 45# Carbon Steel. Coated With Black Oxide Finish For Ultra Strength And Long Durability To Withstand Rugged Jobs On Stubborn Bearings And Gears..
【Easy Storage】 Come With Heavy Duty Plastic Blow-Molded Carrying Case With Handle And Latches For Safe Transport, Simple Storage, And Quick Organization..
【Effective Operation】This Wheel Hub Axle Puller Set Includes Two Most Widely Used Bearing Separator Jaws, Help To Complete A Variety Of Bearing Pulling Jobs, And The 5-Ton-Capacity And Heavy-Duty Industrial Grade Bolts Ensure Tools Will Not Bend And Break During Operation. It Takes Little Effort To Be Assembled By Professionals Or Do-It-Yourself..
【Superior Versatile】 Our Bearing Separator Set Includes 2-Piece Bearing Separator Jaws For Most Small And Large Wheel Bearings And Gears. The 8-Piece Push-Pull Legs And Extension Legs Fit Most Shafts Of Different Length. This Tool Set Is Ideal For Pulling Gears, Pulleys, Bearings, Axle Shafts, Pinion, Steering Wheels On Cars, Vehicles, Atvs, And Light Trucks..
Features
- HIGHLY PRACTICAL KOOPOOL 5-Ton capacity bearing puller set includes 2-piece bearing separator jaws of maximum opening (2 , 3 ), 1-piece heavy duty forcing screw (7 ), 4-piece hex push-pull legs (4 , 5 ), 4-piece hex extension legs (4 , 5 ), 1-piece yoke (6 long). All puller components are included to help you remove and install small and large wheel bearings on front and rear wheel hubs, gears, pulleys, axle shafts, and pinion on most cars effectively and fast.
- SUPERIOR VERSATILE Our bearing separator set Includes 2-piece bearing separator jaws for most small and large wheel bearings and gears. The 8-piece push-pull legs and extension legs fit most shafts of different length. This tool set is ideal for pulling gears, pulleys, bearings, axle shafts, pinion, steering wheels on cars, vehicles, ATVs, and light trucks.
- PREMIUM MATERIAL This gear puller set is built with rugged drop-forged construction and made of heat-treated high hardness 45# carbon steel. Coated with black oxide finish for ultra strength and long durability to withstand rugged jobs on stubborn bearings and gears.
- EFFECTIVE OPERATION This wheel hub axle puller set Includes two most widely used bearing separator jaws, help to complete a variety of bearing pulling jobs, and the 5-ton-capacity and heavy-duty industrial grade bolts ensure tools will not bend and break during operation. It takes little effort to be assembled by professionals or do-it-yourself.
- EASY STORAGE Come with heavy duty plastic blow-molded carrying case with handle and latches for safe transport, simple storage, and quick organization.
- See more on Amazon...
Brand: KOOPOOL | Manufacturer: KOOPOOL
Dimensions: 2.56 x 14.02 x 8.90 inches | Weight: 9.72 Pounds
Warranty: 2 YEARS
See On Amazon #11
DURATECH 4-Piece 3-Jaw Gear Puller, 3", 4", 6", 8", Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel
Asin: B08G8TZ5HM | Model: DT3JGP04S | PartNumber: DT3JGP04S | Ean: 0820909680871 | UPC: 820909680871
Each Of The Three 3-Jaw Gear And Bearing Pullers Can Be Reversed To Pull Parts From Either The Inside Or Outside. Universal 4 Or 8-Position Reversible Jaws Offer An Inside Or Outside Grip With Short, Standard, Long, Or Extra-Long Reach..
Use The Duratech 3, 4, 6, And 8-Inch Gear Puller 3 Jaw Flywheel Puller Set To Remove Most Shift-Fitted Parts With Ease. Perfect For You To Smoothly And Safely Slide Gear, Pulley, Bearing, And Flywheel Off The Shaft. Free Replacement Insures Your Duratech Wrenches Purchase Against Manufacturer Defects..
The Three-Jaw Design Balances The Pulling Force Well, And Claws Are Precisely Machined To Give A Non-Slip And Secure Grip On The Gears. Make It Deal For Pulling Work In Confined Areas. Achieve More With Its Adjustable And Reversible Jaws..
Three Jaws Come With Fine Chrome Plating To Provide Reliable And Effective Rust And Corrosion Protection. The Drive Screw Is Covered By Black Phosphatizing, Which Provides Maximum Strength And Longevity To The Gear Puller, Puller Jaws Allow For Easy Gripping And Access To Tight Spaces. No Need To Assemble Yourself Is The Advantage Of Duratech..
Features
- Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.
- Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.
- Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8-position reversible jaws offer an inside or outside grip with short, standard, long, or extra-long reach.
- The three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws.
- Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects.
- See more on Amazon...
Brand: DURATECH | Manufacturer: LONGYOU YIYANG IMPORT AND EXPORT CO.,LTD
See On Amazon #12
Orion Motor Tech Rear Axle Bearing Puller Tool Set, Rear Axle Bearing Remover Set, Rear Axle Bearing Removal Tool Kit with 3 Sizes 1 to 1-7/8, 1-5/16 to 2-3/8, & 1-3/8 to 2-7/8
Asin: B08FCZ7Z17 | Model: RA0300 | PartNumber: RA0300
Scratch-Free Service: The Washers On Our Bearing Pullers Distribute Your Tool's Force Evenly To Provide Sure Grip And Avoid The Damage Caused To Bearings And Casings By Claw-Type Pullers.
Superior Dependability: Each Of The 3 Pullers Is Constructed From 45# Structural Steel For Outstanding Strength And Durability; Each Piece Is Blackened With Galvanized Nuts To Offer Even Greater Longevity And Corrosion Resistance.
Wide Application: The Small, Medium, And Large Bearing Pullers Cover Inner Diameters From 1 To 1-7/8", 1-5/16" To 2-3/8", And 1-3/8" To 2-7/8" Respectively, Covering The Rear Axle Bearings Used In The Vast Majority Of Domestic Makes And Models.
Convenient Design: Laser-Etched Markings Clearly Identify Each Of The Three Pullers In Their Custom Carry Case, While Their Rotary Connectors Give You Easier Access In Narrow Spaces.
Features
- 3PC. BEARING PULLER SET: This 3-piece professional rear axle bearing removal tool set by Orion Motor Tech works with your 5/8" slide hammer to let you quickly and easily pop out worn or damaged semi-floating rear axle bearings
- CONVENIENT DESIGN: Laser-etched markings clearly identify each of the three pullers in their custom carry case, while their rotary connectors give you easier access in narrow spaces
- SCRATCH-FREE SERVICE: The washers on our bearing pullers distribute your tool's force evenly to provide sure grip and avoid the damage caused to bearings and casings by claw-type pullers
- WIDE APPLICATION: The small, medium, and large bearing pullers cover inner diameters from 1 to 1-7/8, 1-5/16 to 2-3/8, and 1-3/8 to 2-7/8 respectively, covering the rear axle bearings used in the vast majority of domestic makes and models
- SUPERIOR DEPENDABILITY: Each of the 3 pullers is constructed from 45# structural steel for outstanding strength and durability; each piece is blackened with galvanized nuts to offer even greater longevity and corrosion resistance
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
Dimensions: 3.00 x 9.00 x 7.00 inches | Weight: 3.00 pounds
Warranty: 1 year warranty
See On Amazon #13
BELOMI 3 Jaw Inner Bearing Puller, Pilot Bearing Gear Puller for Auto with Reversible Jaws, Heavy Duty Gear Extractor Tool for Automotive Wheel, Pulling Kit for Motorcycle Car SUV (6 inch)
Asin: B0CJR59FHY | Model: Inner Bearing Puller | PartNumber: Inner Bearing Puller
【Practical Pulling Tool】: If You Carry Out Work To Remove Pulleys, Gears, Bearings, Cranks Etc., Our Wheel Bearing Removal Tool Makes It Easy To Pull Them Out And Protects These Car Parts Well From Damaging Them, Increasing Your Efficiency And Saving You Time..
【Package Includes】: There Are Three Size Specifications: 3 Inches, 4 Inches Or 6 Inches. Please Choose According To The Size Of The Part You Need To Handle And The Range Of 3 Jaw Puller To Avoid Unsuitable Application. And Each Package Includes 1 Piece 3-Jaw Pilot Bearing Puller..
【Wide Application】: Our 3-Jaw Inner Bearing Puller Is Perfect For A Wide Range Of Uses, Including Motorcycle Wheel, Bicycle Wheel, Pump Bearing Generator Bearing, Machine Bearing Etc. Structure Design, Gently Turning The Small Wrench Can Produce A Strong Pull Force..
【Three-Jaw Design】: The Bearing Puller Group Adopts A Three-Jaw Design. The Three-Jaw Design Can Apply Uniform Pressure, Which Can Effectively Prevent Slippage And Bearing Damage, And Ensure Stability During Use. It Allows For A Strong Pulling Force With Minimal Effort..
Features
- Premium Quality : The 3-Jaw bearing extractor pilot bearing puller is made of high-grade carbon steel material with black oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws. Our inner bearing puller is also heat-treated for exceptional strength and longevity. The corrosion-resistant coating ensures optimal performance and protection.
- Three-Jaw Design : The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure stability during use. It allows for a strong pulling force with minimal effort.
- Practical Pulling Tool : If you carry out work to remove pulleys, gears, bearings, cranks etc., our wheel bearing removal tool makes it easy to pull them out and protects these car parts well from damaging them, increasing your efficiency and saving you time.
- Wide Application : Our 3-Jaw Inner Bearing Puller is perfect for a wide range of uses, including motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc. Structure design, gently turning the small wrench can produce a strong pull force.
- Package Includes : There are three size specifications: 3 inches, 4 inches or 6 inches. Please choose according to the size of the part you need to handle and the range of 3 jaw puller to avoid unsuitable application. And each package includes 1 piece 3-jaw pilot bearing puller.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 0.70 x 2.00 x 1.50 inches
Warranty: 0.2
See On Amazon #14
VEVOR Carrier & Pinion Bearing Puller, Compatible with Dana 30,40,50,60,70, 80, Ford 10.25" Bearings, Pinion Puller Tool with 3 Clamshells, 45# Steel Clamshell Bearing Puller for Auto Repair
Asin: B09RHXDMBP | Model: Carrier & Pinion Bearing Puller | PartNumber: Carrier & Pinion Bearing Puller | Ean: 0840281501298 | UPC: 840281501298
Complete Equipment: All Necessary Parts Are Ready For You. There Is A Main Puller Body, Plug, Center Bolt, 3 Clamshells, Retaining Ring, And Adjuster Rings. Besides, This Unit Comes With A Handy Stand, So You Can Group All The Working Parts Together..
Superior Material: The Clamshell Bearing Tool Is Made Of Durable 45# Steel, Providing Good Performance In Withstanding Abrasion, Corrosion, And Impact. Constructed Of High-Strength Material, It Is A Robust Tool Built To Last..
Easy To Operate: There Is No Need For Other Complex Working Tools. Firstly, Place The Main Body Over The Plug And Adjust The Lower And Upper Adjusting Ring. Secondly, Select A Proper Clamshell And Tighten The Retaining Ring. Finally, You Can Use An Impact Gun To Remove The Bearing..
Premium Performance & Features: With High Working Efficiency, This Carrier Pinion Bearing Puller Can Effortlessly Remove The Pinion Bearings With Minor Damage, Drastically Reducing Dismantled Time. And The Carrier Bearing Puller Will No Longer Easily Pry Into The Pinion's Sealing Surface..
Features
- Great Compatibility: The clamshell carrier bearing puller is compatible with Dana 30, 40, 60, 70, Ford 10.25" bearings. With the clamshell bearing puller, you can quickly remove the bearings. In addition, its power is evenly distributed, so less damage will be brought to your pinion bearings.
- Premium Performance & Features: With high working efficiency, this carrier pinion bearing puller can effortlessly remove the pinion bearings with minor damage, drastically reducing dismantled time. And the carrier bearing puller will no longer easily pry into the pinion's sealing surface.
- Complete Equipment: All necessary parts are ready for you. There is a main puller body, plug, center bolt, 3 clamshells, retaining ring, and adjuster rings. Besides, this unit comes with a handy stand, so you can group all the working parts together.
- Easy to Operate: There is no need for other complex working tools. Firstly, place the main body over the plug and adjust the lower and upper adjusting ring. Secondly, select a proper clamshell and tighten the retaining ring. Finally, you can use an impact gun to remove the bearing.
- Superior Material: The clamshell bearing tool is made of durable 45# steel, providing good performance in withstanding abrasion, corrosion, and impact. Constructed of high-strength material, it is a robust tool built to last.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 11.00 x 8.90 x 5.00 inches | Weight: 31.75 Pounds
See On Amazon #15
ChgImposs 12 Inch 2-Jaw Gear Puller, Adjustable CR-V Bearing Puller Gears, Removal Tool for External Internal Pulling, Puller Tool Separate Lifting Device
Asin: B0CH9Z6DFN | Model: EPC_HAD_B0P | PartNumber: EPC_HAD_B0P
Adjustable Design - Adjustable Clamping Depth And Grip Width, Suitable For Different Sizes Of Gears And Bearings，Enables Many Bearings And Components To Be Dismounted.
Ease Of Use - Hexagonal Head On Spindle With A Flange, Helps Prevent The Spanner From Slipping During Operation. Button On Beam Enhances The Stability And Safety, Also Makes It Easily To Change The Puller Into Internal Or External Gear Puller..
Damage Free Removal - Removal Tool Kit For Slide Gears, Pulley, And Flywheel, Makes Removal Simple And Damage-Free. Can Be Used For Automotive Flywheel, Motorcycle Wheel, Bicycle Wheel, Car Wheel, Machine Wheel, Etc.
Multi-Purpose Reversible Jaw Puller - The Two Arms Of The Puller Can Be Mounted With The Claws Facing Inside Or Facing Outside, Suit For Internal And External Pulling Of Bearings And Other Components..
Features
- High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearings enables many bearings and components to be dismounted
- Damage Free Removal - Removal tool kit for slide gears, pulley, and flywheel, makes removal simple and damage-free. Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc
- Ease of Use - Hexagonal head on spindle with a flange, helps prevent the spanner from slipping during operation. Button on beam enhances the stability and safety, also makes it easily to change the puller into internal or external gear puller.
- See more on Amazon...
Brand: ChgImposs | Manufacturer: FLXDirect
Dimensions: 1.30 x 11.00 x 10.00 Inches
Warranty: This item can be returned in its original condition for a full refund or replacement within 30 days of receipt.
See On Amazon #16
HQSSWUCH 21 in1 Bearing Puller, Bearing Puller Set, Inner Hole Three-Jaw Puller, with Curved Hook and Red Steel Collet Multifunctional Bearing Removal Tool, with Heavy Duty Portable Storage Case Blue
Asin: B0BQ3VMT3N | Model: dgnzcczgj-21jz | PartNumber: dgnzcczgj-21jz | Ean: 0669423060598 | UPC: 669423060598
【Specialty Storage Box】Bearing Removal Tool Each Component Is Contained In A Heavy-Duty Plastic Carrying Case With A Handle For Safe Storage And Quick Organization. With Precision Sized Slots For Each Component, It Keeps Your Gear Organized While Extending The Life Of Your Tools..
【Applicable Models】6005 / 6006 / 6007 / 6008 / 6009 / 6010 / 6205 / 6206 / 6207 / 6208 / 6209 / 6210 / 6305 / 6306 / 6307 / 6308 / 6309 / 6310. Three Grips Can Also Remove More Different Types Of Bearings, Gears And Kits..
【Wide Application】This Internal Bearing Puller Set Contains Six Different Dimensions And Specifications Of Collets, Can Remove A Variety Of Different Shapes, Different Sizes Of Bearings. Three New Hooks Are Added To Make Disassembly Easier And Can Be Applied To More Bearings Of Different Specifications..
【Easy Disassembly】Our Bearing Puller Kit Is A Kind Of Bore Bearing Pulling Tool, Choose A Suitable Collet To Place In The Middle Of Bearing Inner Ring And Outer Ring, Use A Wrench To Twist The Inner Hole Bearing Puller Top Rod Screw, The Bearing Will Be Easily Taken Out, Without Damaging The Repair Parts. It Is The Most Ideal Tool For Maintenance Industry..
Features
- PREMIUM BEARING PULLER HQSSWUCH bearing puller set is built with rugged drop-forged construction and made of heat-treated high hardness red steel, for ultra strength. Inner hole three-jaw puller coated with black oxide finish ensures corrosion resistance and long-term durability, easy disassembly of stubborn bearings.
- EASY DISASSEMBLY Our bearing puller kit is a kind of bore bearing pulling tool, choose a suitable collet to place in the middle of bearing inner ring and outer ring, use a wrench to twist the inner hole bearing puller top rod screw, the bearing will be easily taken out, without damaging the repair parts. It is the most ideal tool for maintenance industry.
- SPECIALTY STORAGE BOX Bearing removal tool each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. with precision sized slots for each component, It keeps your gear organized while extending the life of your tools.
- WIDE APPLICATION This internal bearing puller set contains six different dimensions and specifications of collets, can remove a variety of different shapes, different sizes of bearings. Three new hooks are added to make disassembly easier and can be applied to more bearings of different specifications.
- APPLICABLE MODELS 6005 / 6006 / 6007 / 6008 / 6009 / 6010 / 6205 / 6206 / 6207 / 6208 / 6209 / 6210 / 6305 / 6306 / 6307 / 6308 / 6309 / 6310. Three grips can also remove more different types of bearings, gears and kits.
- See more on Amazon...
Brand: HQSSWUCH | Manufacturer: LYCX-shop
Dimensions: 2.40 x 11.00 x 8.50 inches | Weight: 6.50 Pounds
See On Amazon #17
Bearing Puller Tool 3 Jaw Pilot Bearing Puller Blind Bearing Puller Set Bearing Pullers Bushing Gear Puller Small Inner Internal Bearing Puller Kit Car Motorcycle Wheel Pilot Bearing Removal Tool
Asin: B09LQWGLM9 | Model: SM-3 JAW LABAQ | PartNumber: SM-3 JAW LABAQ | Ean: 0661706278089 | UPC: 661706278089
【Excellent Design】The Bearing Puller Group Adopts A Three-Jaw Design. The Three-Jaw Design Can Apply Uniform Pressure, Which Can Effectively Prevent Slippage And Bearing Damage, And Ensure The Bearing Puller Stability During Use. The Forged And Heat-Treated Steel Jaws In The Bearing Puller Are Coated With A Corrosion-Resistant Coating To Make Them More Durable..
【3-Year Warranty】We Provide 36 Months Free Warranty For This 3 Jaw Bearing Puller To Ensure Your Shopping Experience. If You Have Any Questions About This 3-Jaw Bearing Puller, Please Feel Free To Contact Us And We Will Provide You With A Satisfactory Solution As Soon As Possible..
【High-Quality Pilot Bearing Puller】 The Inner Bearing Puller Is Made Of High-Quality Carbon Steel Through Forging And Special Heat Treatment Process, So That Our Bearing Puller Has High Strength, Toughness And Longer Service Life..
【Wide Application】This 3 Jaw Pilot Bearing Puller Is Widely Used In Automobile Bearings, Motorcycle Electric Car Bearings, Mechanical Bearings, Agricultural Machinery Etc. This Bearing Puller Is Easy To Operate, Easy To Use And Durable..
Features
- Application Range Gently rotating the bearing tool will generate a lot of tension, saving time and effort when used. Scope of use: inner jaw: 30-38mm, outer jaw: 16-30mm. When using tools, keep a balance to avoid damaging the hook rod. If the bearings are rusty, it cannot be applicable.
- Wide Application This 3 jaw pilot bearing puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings, agricultural machinery etc. This bearing puller is easy to operate, easy to use and durable.
- Excellent Design The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use. The forged and heat-treated steel jaws in the bearing puller are coated with a corrosion-resistant coating to make them more durable.
- High-Quality Pilot Bearing Puller The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life.
- 3-Year Warranty We provide 36 months free warranty for this 3 jaw bearing puller to ensure your shopping experience. If you have any questions about this 3-jaw bearing puller, please feel free to contact us and we will provide you with a satisfactory solution as soon as possible.
- See more on Amazon...
Brand: CMTOOL | Manufacturer: CMTOOL
Warranty: 1 year
See On Amazon #18
YOTOO Bearing Puller Set 14-Piece, 5 Ton Capacity Bearing Separator Kit with 2" and 3" Jaws, Wheel Hub Axle Puller Set, Heavy Duty Bearing Splitter Tool Kit with Case
Asin: B089T33FWD | Ean: 0657228954860 | UPC: 657228954860
Various Pulling Jobs: Yotoo Pulling Kit Features A Bar Puller And Legs That Are Perfect Solutions To Complete Pulling Jobs Safely And Successfully..
Warranty&Support: One Year Warranty. If Any Problems, Please Feel Free To Contact Us..
Widely Use: This Bearing Puller Kit Can Be Used Separately Or In Combination With Other Pullers And Tools, Making This Tool Suitable For Beginners Or Professionals.
Complete Set: Yotoo Bearing Separator Set Comes With 2"&3" Bearing Splitters,Four Sets Of Hex Push Puller Legs, Two 4-1/2" L Type Puller Legs And A 5 Inch Bar Type Puller Head With Forcing Screw, Giving The User Options To Deal With Various Pulling Jobs..
Features
- HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool.
- COMPLETE SET: YOTOO bearing separator set comes with 2&3 bearing splitters,four sets of hex push puller legs, two 4-1/2 L type puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs.
- VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully.
- WIDELY USE: This bearing puller kit can be used separately or in combination with other pullers and tools, making this tool suitable for beginners or professionals
- WARRANTY&SUPPORT: ONE YEAR WARRANTY. If any problems, please feel free to contact us.
- See more on Amazon...
Brand: YOTOO | Manufacturer: Hangzhou Yotoo Import and Export Co.,Ltd
See On Amazon #19
MOFEEZ 3" 4" 6" 3 Jaw Gear Bearing Puller Removal Tool for Slide Gears, Pulley, and Flywheel (Silver)
Asin: B0BRXS9QVS | Model: 99MF18006-3 | PartNumber: 99MF18006-3 | Ean: 0647535997728 | UPC: 647535997728
3 Or 6 Position Design: The Universal And Reversible Jaws Offer Versatile Inside Or Outside Grip Along With Short Or Long Reach; The 3-Inch And 4-Inch Gear Puller Has 3 Positions And The 6-Inch Gear Pullers Have 6 Positions..
Package Contents: Included Is A 3-Inch Gear Puller With A 4.5-Inch Jaw Spread And 1.5-Inch Jaw Reach, 4-Inch Gear Puller With A 6.25-Inch Jaw Spread And 2.5-Inch Jaw Reach, And A 6-Inch Gear Puller With A 8.75-Inch Jaw Spread And 4.75-Inch Jaw Reach..
Built To Last: All Parts Are Made With Premium Carbon Steel For Maximum Strength. The Jaws Are Galvanized To Provide Superior Corrosion Resistance And Long Service Life..
Features
- DAMAGE-FREE REMOVAL: This Mofeez 3 jaw puller removal tool makes removal side gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more simple and damage-free. It can be worked with your wrench, ratchet, or spanner.
- BUILT TO LAST: All parts are made with premium carbon steel for maximum strength. The jaws are galvanized to provide superior corrosion resistance and long service life.
- 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
- PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
- See more on Amazon...
Brand: MOFEEZ | Manufacturer: Mofeez
Dimensions: 4.41 x 8.86 x 4.92 inches | Weight: 5.35 pounds
See On Amazon #20
XMHF Adjustable 2-Jaw Gear Puller Motorcycle Car Auto Removal Tool Kit for Gears, Pulley, and Flywheel
Asin: B07FY4BT8B | Model: 8542036317 | PartNumber: 8542036317 | Ean: 7679477514278
Claw Size: 10 X 3 X 0.5Cm/ 3.9 X 1.2 X 0.2 Inches(L*W*T).
Package Content: 1 X Two Jaw Puller Tool.
Weight:378G.
Dimension: 12.5 X 8 X 3Cm/ 4.9 X 3.1 X 1.2 Inches(L*W*T).
Features
- Material:Carbon Steel ; Color: Black,Brass Tone
- Dimension: 12.5 x 8 x 3cm/ 4.9 x 3.1 x 1.2 inches(L*W*T)
- Claw Size: 10 x 3 x 0.5cm/ 3.9 x 1.2 x 0.2 inches(L*W*T)
- Weight:378g
- Package Content: 1 x Two Jaw Puller Tool
- See more on Amazon...
Brand: XMHF | Manufacturer: XMHF
See On Amazon
Looking For Something Else?
Search