1pc for Car Side Fender Rear Trunk Emblem Badge Chrome Decal Sticker 3D Car 4MATIC Logo ABS Letter Emblem Decal (4matic-Silver - Style 1)
Asin: B0CN8RZZ19 | Model: DRIMGREN | PartNumber: DRIMGREN
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【 Compatibility 】: Decorations Are Suitable For All Cars.
【Easy To Install】: 3M Strong Adhesive. Installation Is Very Easy, No Tools Are Needed, Just Peel It Off And Stick It Onto The Vehicle. Attention: Before Installation, The Car Surface Must Be Thoroughly Cleaned, At Least Once To Ensure Strong Adhesion.
【 Product Material 】: Abs Plastic, Luxury Badge..
Features
- Size : 5.82 x 0.9 inches.
- Product Material : ABS plastic, luxury badge.
- Compatibility : Decorations are suitable for all cars
- Easy to install : 3M strong adhesive. Installation is very easy, no tools are needed, just peel it off and stick it onto the vehicle. Attention: Before installation, the car surface must be thoroughly cleaned, at least once to ensure strong adhesion
- See more on Amazon...
Brand: DRIMGREN | Manufacturer: DRIMGREN
Weight: 0.02 Pounds
Warranty: DRIMGREN
See On Amazon Similar To 1pc for Car Side Fender
#1
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
Asin: B07FV5ZJL3 | Model: GRC-30 | PartNumber: GRC-30 | Ean: 0812227030766 | UPC: 812227030766
Great Material - These Bumper Clips Are Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use..
Package Included:120Pcs 6.3Mm 8Mm 9Mm 10Mm Bumper Push Rivet Clips,1Pc Fastener Remover.
Widely Application - These Push Clips Are Widely Used For Trim Panel Clips, Door Trim Clips, Door Panel Clips, Bumper Clips, Fender Clips, Engine Cover And Splash Shield Retainers Replacement. It Always Covers Some Applications Include Telecom Equipment, Motor Vehicles, Domestic Appliances, Furniture And Electrical Equipment..
6 Different Push Pin Rivet For Many Brand Vehicles..
Features
- 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
- 6 different Push pin rivet for many brand vehicles.
- Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
- Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
- PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 0.70 x 5.00 x 5.00 Inches | Weight: 0.65 Pounds
Warranty: 2 years Warranty
See On Amazon #2
UNIGT 150pcs ATV UTV Body Fastener Rivets Push Pin Compatible with Can Am 293150089 Polaris 7661855 RZR Ranger Suzuki Kawasaki Rancher 90653-HC4-900 Plastic Fender Clips
Asin: B07PJF29WJ | Model: 7661855 | PartNumber: 7661855 | Ean: 0608603170276 | UPC: 608603170276
Nylon Material, No Break - Solid Fender Fastener Rivets Made Of High Quality Nylon, Will Not Break During Use. Easy To Replace All Of The Old Body Panel Fasteners.
Widely Used And Reusable For Sxs And Four-Wheeler Trim Panel Clips, Bumper Clips, Fender Clips, Engine Cover, And Splash Shield, Replace Part Numbers: #7661855, 90653-Hc4900, 90653Hc4900..
Easy To Replace All Of The Old Bumper Fasteners For Utv And Atv, Comes Ready To Be Installed Status With The Storage Box Package For Ease Of Surplus Clips Using Next Time.
Solid Fender Fastener Rivets - Used To Hold Fender And Body Panel On Commander/Maverick/Outlander, Polaris Sportsman Atv, Ranger, Rzr, Snowmobiles, Suzuki King Quad Vinson, And So On.
Features
- Better Than OEM Fender Clips - universal 8mm plastic fender clips body rivets replacement for utv atv. this set of push pins are the same basic design as OEM with better quality
- Solid fender fastener rivets - used to hold fender and body panel on commander/maverick/outlander, polaris sportsman atv, ranger, rzr, snowmobiles, suzuki king quad vinson, and so on
- Nylon Material, No Break - Solid fender fastener rivets made of high quality nylon, will not break during use. Easy to replace all of the old body panel fasteners
- Easy to replace all of the old bumper fasteners for utv and atv, comes ready to be installed status with the storage box package for ease of surplus clips using next time
- Widely used and Reusable for SXS and four-wheeler trim panel clips, bumper clips, fender clips, engine cover, and splash shield, replace part numbers: #7661855, 90653-HC4900, 90653HC4900.
- See more on Amazon...
Brand: UNIGT | Manufacturer: UNIGT Auto Parts
See On Amazon #3
GOOACC 935Pcs Car Push Retainer Clips & Auto Fasteners Assortment -26 Most Popular Sizes Nylon Bumper Fender Rivets with 10 Cable Ties and Fasteners Remover for GM Ford Toyota Honda Chrysler
Asin: B0CG9PN82V | Model: GRC-139 | PartNumber: GRC-139 | Ean: 0840323903493 | UPC: 840323903493
【Prefect For What You Need】 - Up To 830 Pieces Of Retainer Clips In A Plastic Box, Allows To Freely Diy Your Vehicle Accessories At Anytime You Wanted. It Is Definitely Cheaper Than Going To The Auto Parts Store..
【Easy Storage】- Comes With Plastic Box For Organized Storage. Compact Size, Convenient To Store Or Carry With In Your Car.
【Bonus Accessories】- We Provide Different Size Fastener Removers,Sponge-Cushion And Cable Ties To Help You Quickly And Easily Remove Car Door Panel And Upholstery Clips Without Causing Damage To Them. Easy Access Into Confined Areas..
【Top Quality】- These Car Retainer Clips Are Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use..
Features
- UNIVERSAL FIT KIT - The kit contains 26 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you ll always have the right size.
- TOP QUALITY - These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
- PREFECT FOR WHAT YOU NEED - Up to 830 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
- BONUS ACCESSORIES - We provide different size fastener removers,sponge-cushion and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
- EASY STORAGE - Comes with plastic box for organized storage. Compact size, convenient to store or carry with in your car
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Dimensions: 6.65 x 8.50 x 6.97 Inches
Warranty: 2 Years Warranty
See On Amazon #4
100PCS Bumper Fender Clips, 10mm Fender Liner Clip Compatible with Honda CR-V Accord Civic Acura, 1PCS Fastener Remover 91503-SZ3-003
Asin: B0CHHYVM4H
Oe: 91503-Sz3-003 Retaining Clip, Bumper, Door Trim, Fender, Radiator Shield Yoke, Grille, Side Skirt, Splash Shield And Engine Cover Retainers.
Compatible With Honda Accord 2001-2014, Cr-V 1997-2021, Cr-Z 2011-2016, Civic 1997-2016, Del Sol 1997, Element 2003-2011, Fit 2007-2020, Insight 2000-2014, Odyssey 1996-2022, Passport 2019-2021, Pilot 2003-2021, Prelude 1997-2001, S200 2000-2009, Ridgeline 2006-2014.
Include: 100Pcs Fastener Rivet Clips,1Pc Fastener Remover. If There Is Any Problem, Please Send Us An Email In Time, We Will Get In Touch With You As Soon As Possible..
Compatible With Acura Cl 1997-2003, Integra 1996-2001, Mdx 2001-2014, Nsx 1997 - 2021, Rdx 2007-2014, Rl 1996 - 2012, Rsx 2002 - 2006, Tl 1997 - 2014, Tsx 2004 - 2014, Zdx 2010 - 2013..
Size: Stem Length: 16 Mm; Head Diameter: 20 Mm, Fits: 10Mm Hole. Extra Strong Pom Polymer, Exact Replacement For The Old And Cracked Or Missing Clips.
Features
- 100PCS Bumper Fender Clips, 10mm Fender Liner Clip Compatible with Honda CR-V Accord Civic Acura, 1PCS Fastener Remover 91503-SZ3-003
- SIZE: Stem length: 16 mm; Head diameter: 20 mm, Fits: 10mm hole. Extra Strong POM Polymer, Exact replacement for the old and cracked or missing clips
- OE: 91503-SZ3-003 retaining clip, Bumper, Door trim, Fender, Radiator shield yoke, grille, Side Skirt, Splash Shield and Engine Cover Retainers
- Compatible with Acura CL 1997-2003, Integra 1996-2001, MDX 2001-2014, NSX 1997 - 2021, RDX 2007-2014, RL 1996 - 2012, RSX 2002 - 2006, TL 1997 - 2014, TSX 2004 - 2014, ZDX 2010 - 2013.
- Compatible with Honda Accord 2001-2014, CR-V 1997-2021, CR-Z 2011-2016, Civic 1997-2016, Del Sol 1997, Element 2003-2011, Fit 2007-2020, Insight 2000-2014, Odyssey 1996-2022, Passport 2019-2021, Pilot 2003-2021, Prelude 1997-2001, S200 2000-2009, Ridgeline 2006-2014
- INCLUDE: 100PCS Fastener Rivet Clips,1PC Fastener Remover. If there is any problem, Please send us an email in time, We will get in touch with you as soon as possible.
- See more on Amazon...
Brand: TOPCNOEM | Manufacturer: TOPCNOEM
See On Amazon #5
100Pcs Nylon Engine Under Cover Push-Type Retainer Clips Engine Splash Shield Fender Liner Trunk Lid Trim with Bonus Fastener Remover Compatible with Toyota Lexus 90467-07201
Asin: B0BCQGNT43 | Model: TOPCNOEM-90467-07201-100ps | PartNumber: TOPCNOEM-90467-07201-100ps
Under Cover Retainer, Lower Extension Clip, Engine Under Cover Push-Type Retainer, Rear Duct Clip, Wheelhouse Liner Clip, Trunk Side Trim Clip, Side Duct Clip, Storage Cover Retainer, Grille Clip, Bumper Cover Clip, Grille Retainer, Door Trim Panel Clip, Spoiler Clip, Sight Shield Clip.
Compatible With Lexus: Ct200h, Es300, Es330, Es350, Gs F, Gs Turbo, Gs200t, Gs300, Gs350, Gx460, Hs250h, Is F, Is200t, Is250, Is300, Is350, Ls460, Ls600h, Rc200t, Rc300, Rc350, Rx350, Rx450h.
Compatible With Toyota: 4Runner, Avalon, Camry, Corolla, Corolla Im, Highlander, Matrix, Rav4, Sequoia, Solara, Tacoma, Tundra, Venza.
Compatible With Lexus Toyota 90467-07201.
Features
- 100PCS Push type retainer Clips + 1pcs Fastener Remover. Quality black nylon material, Head Diameter: 20mm, Stem Length: 10mm, Fits Into 7mm Hole
- Compatible with Lexus Toyota 90467-07201
- Under Cover Retainer, Lower Extension Clip, Engine Under Cover Push-Type Retainer, Rear Duct Clip, Wheelhouse Liner Clip, Trunk Side Trim Clip, Side Duct Clip, Storage Cover Retainer, Grille Clip, Bumper Cover Clip, Grille Retainer, Door Trim Panel Clip, Spoiler Clip, Sight Shield Clip
- Compatible with Toyota: 4Runner, Avalon, Camry, Corolla, Corolla iM, Highlander, Matrix, RAV4, Sequoia, Solara, Tacoma, Tundra, Venza
- Compatible with Lexus: CT200h, ES300, ES330, ES350, GS F, GS Turbo, GS200t, GS300, GS350, GX460, HS250h, IS F, IS200t, IS250, IS300, IS350, LS460, LS600h, RC200t, RC300, RC350, RX350, RX450h
- See more on Amazon...
Brand: TOPCNOEM | Manufacturer: TOPCNOEM
See On Amazon #6
RONSTA Boat LED Trailer Lights Kit and Light Bar with Wiring Harness Combined Stop, Tail Lights, Amber Trailer Marker Lights, Boat Trailer for Camper Truck Snowmobile (Rectangle Trailer Lights Kit)
Asin: B0C8H8N968 | Model: S05-DT | PartNumber: S05-DT
Compliant With Standards, Application For Over 80 Inch Width Towing Vehicle, Like Truck, Trailer, Boat, Bus, Lorry, Van, Caravan, Snowmobile, Etc..
Advanced Led Combination Lights With Better Heat Distribution, Brighter And More Energy-Efficient Than Halogen Bulbs. Guarantees Reliable Visibility And Safety Even In Inclement Weather;.
Practical Functions: Functions As Running Light, Stop Light, Brake Light, Turn Signal Light, Reverse Light, Flash Light, Rear Reflex Reflector, Side Marker Light, Side Reflex Reflector, License Plate Illuminator, Clearance Light, Identification Light Bar..
Ip68 Waterproof And Submersible: There Is No Screw On The Lamp Shade , The Led Trailer Lights Are Completely Welded Together, The Circuit Board Of Tail Light Is Seal. A Drain Hole Is Designed To Pull Out All The Water. This Is To Guarantee That Water Will Not Damage The Diodes Or Circuit Board. Excellent Tightness Makes It Be Definitely Waterproof And Submersible.Please Install The Trailer Taillights With The Drain Hole Downwards..
Features
- Package included: it has everything you need, 2Pcs stop turn LED tail lights, 6Pcs Mini Oval side fender marker lights, 1Pc 13.8 Inch Trailer 3rd brake identification light bar, 25ft wiring harness, license plate bracket, 4pcs complimentary reflective sticker to ensure that the trailer is properly equipped with the required lighting and safety features for legal and safe use on the road
- IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards.
- Compliant with standards, application for over 80 Inch width towing vehicle, like truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile, etc.
- Practical Functions: Functions as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar.
- Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather;
- See more on Amazon...
Brand: RONSTA | Manufacturer: RONSTA
Warranty: 2 year
See On Amazon #7
12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15" 11LED Trailer Tail Brake Light Bar/License Plate Bracket
Asin: B0B9RCYXPS
Wiring Tips: White Wire Is Ground, Yellow Wire Is High Brightness For Brake Light And Brown Is Low Brightness As Running Light/Left License Plate Illuminator(Square Tail Lights); White Is Ground, Red Is High Brightness For Brake/Stop/Turn Light, Black Is Low Brightness As Running Light(15.5" Led Trailer Light Bar); White Is Ground Andblack Is Positive(Mini Side Marker Lights);.
Warranty And Waterproof: The Led Trailer Wiring Lights Kit Is Completely Sealed, Which Means No Water Can Enter Inside To Damage The Circuit Board. 1 Year Warranty. If You Have Any Questions Or Issues About Our Trailer Tail Lights Led Kit, Please Feel Free To Us And We Will Reply In 24 Hours;.
Brightness: Square Led Trailer Light Has 15 Diodes (12 Red+3 Red) As Stop, Turn, Tail, Side Marker, Side Reflex, And Rear Reflex Functions And On Left Side Built-In License Plate Light(3 White Led) Illuminates License Plate; 15" Led Trailer Tail Light Bar With 11 Leds Provides Stop, Tail, And Turn Functions And Surface Mounts To Trailer; 2.5" Rectangular Led Mini Trailer Light Has 2 Led Diodes Each To Provides Marker/Clearance Lights;.
This Boat Trailer Lights Led Submersible Kit Has Multi Functions: Stop Light, Brake Light, Turn Signal Light, Tail Light, Running Light, Rear Reflex Reflector, Side Marker Light, Side Clearance Lights, Side Reflex Reflector, License Plate Illuminator, Clearance Light, Third 3Rd Brake Light Bar;.
Features
- This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once;
- This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar;
- Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights); white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5 led trailer light bar); white is ground andblack is positive(mini side marker lights);
- Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 white led) illuminates license plate; 15 LED trailer tail light bar with 11 LEDs provides stop, tail, and turn functions and surface mounts to trailer; 2.5 Rectangular LED mini trailer light has 2 led diodes each to provides marker/clearance lights;
- Warranty and Waterproof: The led trailer wiring lights kit is completely sealed, which means no water can enter inside to damage the circuit board. 1 Year Warranty. If you have any questions or issues about our trailer tail lights led kit, please feel free to us and we will reply in 24 hours;
- See more on Amazon...
Brand: Partswcgg | Manufacturer: WCXT-US
Weight: 1.00 Pounds
See On Amazon #8
ATOLS Plastic Welder, 1000PCS Staples, Plastic Welding Kit, Hot Stapler Kit, Plastic Welder Gun Kit, Car Bumper Repair Kit, Plastic Repair Kit, Portable Toolbox
Asin: B091T368MK
【Reliable Quality】Stainless Steel Staple Will Not Rust And 4 Types Of Staples To Meet Your Different Needs. The Wavy Staple Design Maximizes The Load. Restore Your Broken Parts, Prolong Its Service Life. Staple Weld Into The Plastics Quick And Easily. Strong For Shock And Twist After Repairing..
【Portable Welder】Plastic Repair Welder Kit, Bumper Kayak Repair Kit Will Come With Plastic Welder, Pliers, Utility Knife,Carry Case, 150X 0.6Mm Flat Staples, 150X 0.8Mm Flat Staples, 200X 0.6Mm Wave Staples, 300X 0.8Mm Wave Staples, 100X 0.6Mm Inside Corner Staples, 100X 0.8Mm Outside Corner Staples..
【Easy Operation】Ergonomic Design, Suitable For Palm. The Rubber Handle Has A Comfortable Grip And Will Not Feel Tired For A Long Time Holding. Quick And Easy Operation..
【Rapid Heating】Plastic Welding Kit Select The Correct Staples, Insert The Brass Holder, Press The Power Button, 1-2 Seconds To Heat Quickly, Let The Staple Melt Slowly Into The Plastic Parts, Prevent The Staple From Going Through The Plastic Board. Equipped With A Light On The Front Of Our Plastic Welding Machine, The Operation Is More Convenient And Safer..
Features
- Multipurpose Fit Repairs at least 98% of the plastics on the market. Perfect for repairing: bumper, dashboard, lamp holder, plastic ring, radiator, spoiler, handles, headlights, plastic wings, car and motorcycle plastic device, etc
- Rapid Heating Plastic Welding Kit select the correct staples, insert the brass holder, press the power button, 1-2 seconds to heat quickly, let the staple melt slowly into the plastic parts, prevent the staple from going through the plastic board. Equipped with a light on the front of our plastic welding machine, the operation is more convenient and safer.
- Reliable Quality Stainless steel staple will not rust and 4 types of staples to meet your different needs. The wavy staple design maximizes the load. Restore your broken parts, prolong its service life. Staple weld into the plastics quick and easily. Strong for shock and twist after repairing.
- Easy Operation Ergonomic design, suitable for palm. The rubber handle has a comfortable grip and will not feel tired for a long time holding. Quick and easy operation.
- Portable Welder Plastic Repair Welder Kit, Bumper Kayak Repair Kit will come with plastic welder, pliers, utility knife,carry case, 150X 0.6mm flat staples, 150X 0.8mm flat staples, 200X 0.6mm wave staples, 300X 0.8mm wave staples, 100X 0.6mm inside corner staples, 100X 0.8mm outside corner staples.
- See more on Amazon...
Brand: ATOLS | Manufacturer: ATOLS
See On Amazon #9
RONSTA Boat LED Trailer Lights Kit and Light Bar with Wiring Harness Combined Stop, Amber Trailer Marker Lights, Boat Trailer for Camper Truck Snowmobile
Asin: B0C2TK7G88 | Model: S03-DT | PartNumber: S03-DT
Compliant With Standards, Application For Under 80 Inch Width Towing Vehicle, Like Truck, Trailer, Boat, Bus, Lorry, Van, Caravan, Snowmobile, Etc..
Advanced Led Combination Lights With Better Heat Distribution, Brighter And More Energy-Efficient Than Halogen Bulbs. Guarantees Reliable Visibility And Safety Even In Inclement Weather;.
Practical Functions: Functions As Running Light, Stop Light, Brake Light, Turn Signal Light, Reverse Light, Flash Light, Rear Reflex Reflector, Side Marker Light, Side Reflex Reflector, License Plate Illuminator, Clearance Light, Identification Light Bar..
Ip68 Waterproof And Submersible: There Is No Screw On The Lamp Shade , The Led Trailer Lights Are Completely Welded Together, The Circuit Board Of Tail Light Is Seal. A Drain Hole Is Designed To Pull Out All The Water. This Is To Guarantee That Water Will Not Damage The Diodes Or Circuit Board. Excellent Tightness Makes It Be Definitely Waterproof And Submersible.Please Install The Trailer Taillights With The Drain Hole Downwards..
Features
- Package included: it has everything you need, 2Pcs square combination tail lights, 6Pcs Mini Oval side fender marker lights, 1Pc 13.8 Inch Trailer 3rd brake identification light bar, 25ft wiring harness, license plate bracket, 4pcs complimentary reflective sticker to ensure that the trailer is properly equipped with the required lighting and safety features for legal and safe use on the road
- IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards.
- Compliant with standards, application for under 80 Inch width towing vehicle, like truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile, etc.
- Practical Functions: Functions as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar.
- Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather;
- See more on Amazon...
Brand: RONSTA | Manufacturer: RONSTA
Warranty: 2 year
See On Amazon #10
Partsam Submersible Under 80" LED Trailer Light Kit,Square Stop Turn Tail RV Truck Lights w/Wire &Bracket,Red/Amber Side Fender Marker Lamps,3rd Brake ID Light Bar for Camper Truck RV Boat Snowmobile
Asin: B01N1NHCZ6 | Model: 13 | PartNumber: 13
High Btightness: 15 Diodes ( 12 Red+3 Red ) Led Combination Stop Turn Tail Side Marker Light W/Reflector-Curb Side; 19 Diodes ( 12 Red+3 Red+4 White ) Led Combination Stop Turn Tail Side Marker Light W/Reflector-Street Side With License Illuminator; Advanced Led Combination Lights With Better Heat Distribution, Brighter And More Energy-Efficient Than Halogen Bulbs. Guarantees Reliable Visibility And Safety Even In Inclement Weather;.
Widely Used: Ideal For Most Vehicles Equipped With 12V Power Supply Such As Trailers, Campers, Trucks, Dump Truck, Snowmobile, Tractors, Semi-Trailer, Bus, Boat And Other Vehicles With A Width Of 80 Inches (More Or Less);.
Waterproof: The Square Trailer Lights Kit Is Completely Sealed, It Mean No Water Can Enter Inside To Damage The Circuit Board. The Screws Have Been Removed From The Lampshade To Prevent Water Invasion Better, Effectively Protects The Tail Light From Sand, Dust, Dirt, Water Or Snow;.
Multi Functions: Function As Running Light, Stop Light, Brake Light, Turn Signal Light, Reverse Light, Flash Light, Rear Reflex Reflector, Side Marker Light, Side Reflex Reflector, License Plate Illuminator, Clearance Light, Identification Light Bar;.
Features
- Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15 Inch Trailer 3rd brake identification light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once;
- Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar;
- High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side; 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator; Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather;
- Waterproof: The square trailer lights kit is completely sealed, it mean no water can enter inside to damage the circuit board. The screws have been removed from the lampshade to prevent water invasion better, effectively protects the tail light from sand, dust, dirt, water or snow;
- Widely Used: Ideal for most vehicles equipped with 12V power supply such as trailers, campers, trucks, Dump Truck, snowmobile, tractors, semi-trailer, bus, boat and other vehicles with a width of 80 inches (more or less);
- See more on Amazon...
Brand: Partsam | Manufacturer: Partsam
Weight: 1.00 Pounds
See On Amazon #11
RONSTA 6 inch Oval Led Trailer Lights Kit with Mounting Brackets,Light Bar and Wiring, 2PCS Waterproof Stop Brake and White Backup Reverse Lights for Boat RV Truck (Oval Led Trailer Lights Kit)
Asin: B0CS328NVL | Model: DZ003 | PartNumber: DZ003
Amazing Brightness: Led Trailer Lights Has Bright Led Diodes With Super High Visibility, Making Your Vehicle Or Trailer Visible In All Weather And Lighting Conditions, Guarantees Reliable Visibility And Safety Even In Harsh Weather,Avoid Accidents..
Easy Installation: Standard 6" Size. Each Light Comes With An Industry Standard Connector With 12" Of Wiring For Installation. Included Black Rubber Grommet Makes For An Extra Easy Surface Mount Setup - No Holes Or Screws Required. Install Your Lights In Mere Minutes..
Practical Functions: Functions As Running Light, Stop Light, Brake Light, Turn Signal Light, Reverse Light, Flash Light, Rear Reflex Reflector, Side Marker Light, Side Reflex Reflector, Clearance Light, Identification Light Bar..
Ip67 Rate Waterproof And Submersible : Effectively Protects The Light From The Invasion And Corrosion Of Sand, Dust, Dirt, Rain, Snow, Etc, Excellent Tightness Makes It Be Definitely Waterproof And Submersible..
Features
- Package included: it has everything you need, 2Pcs 6 inch Oval Trailer Lights, 6Pcs Mini side fender marker lights, 1Pc 13.8 Inch Trailer 3rd brake identification light bar, 25ft wiring harness and 4pcs reflective sticker to ensure that the trailer is properly equipped with the required lighting and safety features for legal and safe use on the road
- IP67 Rate Waterproof and Submersible : Effectively protects the light from the invasion and corrosion of sand, dust, dirt, rain, snow, etc, excellent tightness makes it be definitely waterproof and submersible.
- Amazing Brightness: Led Trailer Lights has bright LED diodes with super high visibility, making your vehicle or trailer visible in all weather and lighting conditions, guarantees reliable visibility and safety even in harsh weather,avoid accidents.
- Practical Functions: Functions as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, clearance Light, identification light bar.
- Easy Installation: Standard 6 size. Each light comes with an industry standard connector with 12 of wiring for installation. Included black rubber grommet makes for an extra easy surface mount setup - no holes or screws required. Install your lights in mere minutes.
- See more on Amazon...
Brand: RONSTA | Manufacturer: RONSTA
Warranty: 1 year
See On Amazon #12
Nilight - CL-86 635Pcs Car Push Retainer Clips-16 Most Popular Sizes Nylon Bumper Fender Rivets Kit with 10 Cable Ties and Fasteners Remover for Toyota GM Ford Honda Acura Chrysler
Asin: B087NC9ZGN | Model: CL-86 | PartNumber: CL-86 | Ean: 0781621092871 | UPC: 781621092871
Prefect For What You Need: - Up To 620 Pieces Of Retainer Clips In A Plastic Box, Allows To Freely Diy Your Vehicle Accessories At Anytime You Wanted. It Is Definitely Cheaper Than Going To The Auto Parts Store..
Bonus Accessories: - We Provide Different Size Fastener Removers And Cable Ties To Help You Quickly And Easily Remove Car Door Panel And Upholstery Clips Without Causing Damage To Them. Easy Access Into Confined Areas..
Top Quality: - These Car Retainer Clips Are Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use..
Features
- UNIVERSAL FIT KIT: - Great assortment push retainer kit with 16 most popular size, fitting for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers replacement,compatible with Ford, GM, Chrysler, Toyota, Honda and more. All packed in a plastic container for easy organization and storage.
- TOP QUALITY: - These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
- PREFECT FOR WHAT YOU NEED: - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
- BONUS ACCESSORIES: - We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 7.00 x 6.00 x 6.00 Inches
Warranty: 2 Years Warranty
See On Amazon #13
yisige Mutipurpose Diagonal Cutting Pliers Wire Flush Cutters Car Push Retainer Rivet Trim Clip Pry Puller Clips Panel Assortments Puller Auto Body Tools
Asin: B0722L727X | Model: 8 | PartNumber: 8 | Ean: 0700761112492, 0606227150957 | UPC: 606227150957, 700761112492
Size --- Length: 17.5Cm / 7 Inches Around; Weight :170G / 0.37Ib. It Is Lightweight To Use And Carrying!.
100% Satisfaction Assurance --- If You Have Any Problem With Our Products, Please Feel Free To Contact Me! We Will Provide You Full Refund & Free Replacement & Quick Response Services!!!.
Scientific Design --- It Is Designed With A Ergonomic Handle, Which Is Comfotable For Long Time Use! Besides, There Is A Special Spring On The Plier, Which Will Save Your Labor And Make Your Work Easier!.
High Quality --- Made From Carbon Steel, It Is Anti-Corrsion And Non-Rust, Very Sharp And Durable!.
Features
- Wide Application --- This Multifunction Car Push Retainer Rivet Trim Clip Pry Puller is great for most models: Honda, BMW, Mercedes, Nissan, Toyota, Chevy, GMC, Ford, Dodge ects. You can use it to pull car door trim clips, cutting seals buckles with various sizes.
- High Quality --- Made from Carbon Steel, it is anti-corrsion and non-rust, very sharp and durable!
- Size --- Length: 17.5cm / 7 inches around; Weight :170g / 0.37IB. It is lightweight to use and carrying!
- Scientific Design --- It is designed with a ergonomic handle, which is comfotable for long time use! Besides, there is a special spring on the plier, which will save your labor and make your work easier!
- 100% Satisfaction Assurance --- If you have any problem with our products, please feel free to contact me! We will provide you FULL REFUND & FREE REPLACEMENT & QUICK RESPONSE services!!!
- See more on Amazon...
Brand: yisige | Manufacturer: yisige
Dimensions: 0.10 x 6.89 x 2.16 inches
See On Amazon #14
LINKITOM LED Submersible Rectangular Trailer Tail Light Kit, Super Bright Brake Stop Turn Reverse Side Marker Tail License Lights Sealed for Utility Trailer Boat Truck Marine Over 80 Inch
Asin: B0CYZGNGXC | Model: 8012R-904A4R2-821R | PartNumber: 8012R-904A4R2-821R
Ip67 Waterproof And Submersible: There Is No Screw On The Lamp Shade, The Led Trailer Lights Are Completely Sealed. This Is To Guarantee That Water Will Not Damage The Diodes Or Circuit Board. Excellent Tightness Makes It Be Definitely Waterproof And Submersible..
Easy To Install: Please Make Sure Wires Connect Correctly And No Electronic Short Before Marine/Underwater. Package Include The Wiring Diagram. Widely Applicable To 80 Inch Width Tractor, Such As Truck, Trailer, Boat, Bus, Lorry, Van, Caravan, Snowmobile, Etc..
25Ft 18 Gauge Copper Wiring Harness Have More Durable Than The Traditional Copper Coated Aluminum Wires And Split Y-Style Color Coded Harness. Fully Operable In Inclement Weather, These Trailer Lights Are Tough And Durable For The Long Term..
Boat Trailer Tail Lights Kit Have 8 Functions : Stop Light/Turn Signal Light/Tail Light/Rear Reflector/Side Reflector /Side Marker Light/ License Plate Light And Third 3Rd Brake Light Bar. Compliant With Dot Standards..
Features
- Trailer Light Kit : Led boat trailer light kits has everything you need, includes 2Pc Rectangular stop turn signals LED tail lights, 6Pcs mini oval side fender marker lights (2Red+4 Amber), 1Pc 3rd brake identification tail light bar, 25ft wire Harness, license plate bracket, 4pcs complimentary reflective sticker.
- Boat Trailer Tail Lights kit have 8 functions : stop light/turn signal light/tail light/rear reflector/side reflector /side marker light/ license plate light and third 3rd brake light bar. Compliant with DOT standards.
- IP67 Waterproof and Submersible: There is no screw on the lamp shade, the LED trailer lights are completely sealed. This is to guarantee that water will not damage the diodes or circuit board. Excellent tightness makes it be definitely waterproof and submersible.
- 25ft 18 Gauge copper wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and durable for the long term.
- Easy to install: Please make sure wires connect correctly and no electronic short before marine/underwater. Package include the wiring diagram. Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc.
- See more on Amazon...
Brand: LINKITOM | Manufacturer: LINKITOM
See On Amazon #15
ANKIA Universal Adjustable Motorcycle Fold License Plate Tail Light Holder Motorbike License Plate Mount Holder Bracket for Suzuki Kawasaki Ducati Honda (Motorcycle License Plate Bracket)
Asin: B09P1MH25D | Model: ANKHB001PN | PartNumber: ANKHB001PN | Ean: 0744581844072 | UPC: 744581844072
Easy Installation--Simplify Installation Steps, No Modification, Cutting, Or Drilling Required.It Is A Perfect Folding Tail Light License Plate Holder Kit..
Package Inclued--1Pcs X Plate Frame Holder.
Wide Application--The Rear Tail Light License Plate Holder Is Perfect Suitable For Dual Sport Applications, Dirt Bike, Atv Or Youth Monkey Bike. This Holder Can Mount With Tail Light Or Regular License Plate..
Universal Design--Tail Light License Plate Holder Will Fit All Motorcycle With Conventional Rear Fender, Taillight Folding Fixed, Motorbike Modification Repair Parts..
Features
- License Plate Frame Holder--Made of premium aluminum alloy material, this adjustable tail light license plate holder is sturdy, not easy to aging and abrasion resistant.
- Universal Design--Tail light license plate holder will fit all motorcycle with conventional rear fender, taillight folding fixed, motorbike modification repair parts.
- Easy Installation--Simplify installation steps, no modification, cutting, or drilling required.It is a perfect folding tail light license plate holder kit.
- Wide Application--The rear tail light license plate holder is perfect suitable for dual sport applications, dirt bike, ATV or youth monkey bike. This holder can mount with tail light or regular license plate.
- Package Inclued--1Pcs x Plate Frame Holder
- See more on Amazon...
Brand: Anki HappiGo | Manufacturer: ANKIA
See On Amazon #16
Nilight 100PCS Nylon Bumper Rivet Fender Clips OEM Replaces Nissan: 01553-093210 8mm,1PC Bonus Fastener Remover
Asin: B096G72RL9 | Model: BL-46-A | PartNumber: BL-46-A | Ean: 0750139062645 | UPC: 750139062645
【Sturdy And Durable】 - Made Of High-Quality Black Nylon Material, Anti-Wear And Anti-Corrosion, Would Not Break Or Crack Easily During Use.
【Package Include】 - 100Pcs Nylon Fastener Rivet Clips+1Pc Bonus Fastener Remover.2 Years Warranty Honored By Nilight.
【Widely Use】 - Commonly Used For Fitting Side Skirt, Bumper, Car Fender, Door Trim Panel, Interior Trim Panel And Various Trim Panels. They Can Be Used On Cars, Truck, Motorcycles, Buses, Trains, Planes, Caravans, Etc..
【The Same Size & Shape As Original】 - Head Diameter 20Mm ,Stem Length 9Mm,Fits 8Mm Hole.These Universal Push-Type Fastener Clips Will Fit On Most Of Auto Parts With 8Mm Hole, Hold Your Parts Very Tightly..
Features
- HIGHER QUALITY REPLACEMENT - Replaces Nissan: 01553-093210
- THE SAME SIZE & SHAPE AS ORIGINAL - Head Diameter 20mm ,Stem Length 9mm,Fits 8mm Hole.These universal push-type fastener clips will fit on most of auto parts with 8mm hole, hold your parts very tightly.
- STURDY AND DURABLE - Made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use
- WIDELY USE - Commonly used for fitting side skirt, bumper, car fender, door trim panel, interior trim panel and various trim panels. They can be used on cars, truck, motorcycles, buses, trains, planes, caravans, etc.
- PACKAGE INCLUDE - 100PCS Nylon Fastener Rivet Clips+1PC Bonus Fastener Remover.2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 0.20 x 8.00 x 4.00 inches
Warranty: 2 Years Warranty
See On Amazon #17
GIANT BEAR Soft Bristle car wash Brush Head (10"), Streamlined, Non-damaging, Scratch-Free, fits Standard Acme 3/4" trapezoidal Threads for car/Truck/Deck/SUV/Household Cleaning.
Asin: B0B11V63MK
【Safe And Secure】Hog Bristle Bristles Are Porous, Thick And Dense, Suitable For Light And Heavy Dirt, Forming Flocking On The Bristle Surface, Soft, Will Not Damage Sensitive Surfaces, Not Hurt The Paint, Not Hurt The Glossy Surface, Especially Suitable For Light And Heavy Cleaning. The Bristles Are Long And Dense, Suitable For Cleaning Any Deep And Shallow Surfaces, Light And Heavy Dirt Has Nowhere To Escape..
【Easy To Carry】 The Bristles Are Resilient And Not Easily Deformed, Can Be Used For Car Rv Suv Truck Camping Boat Exterior Cleaning And Cleaning.
【Connecting Hose, Cleaning More Convenient】. With The Hose Attachment Attached, The Car Wash Brush Can Be Used As A Cycle Brush Or Soaking Brush For Cars. Can Also Be Used To Clean Window Glass, Tile Surfaces, Floor Surfaces, Interior Floors And Most Surfaces. With Detergent Foam And Soapy Water, It Can Clean Tires, Wheels, Door Mats, Pedals, Bumpers, Fenders, Rims, Undercarriage, Etc..
【Durable And Sturdy】Made Of High Grade Plastic For Long Time Use Without Deformation Or Cracking. Threaded To Fit Standard Acme 3/4 Inch Male Mop Handle Or Extended Brush Bar, Suitable For Exterior Cleaning Of Various Car Surfaces, Camping. Suitable For Home Windows, Doors, Glass, Floors, Corners, Decorative Use..
Features
- Package includes 1pc gray 10 inch car streamlined small brush head.
- Durable and sturdy Made of high grade plastic for long time use without deformation or cracking. Threaded to fit standard ACME 3/4 inch male mop handle or extended brush bar, suitable for exterior cleaning of various car surfaces, camping. Suitable for home windows, doors, glass, floors, corners, decorative use.
- Safe and secure Hog bristle bristles are porous, thick and dense, suitable for light and heavy dirt, forming flocking on the bristle surface, soft, will not damage sensitive surfaces, not hurt the paint, not hurt the glossy surface, especially suitable for light and heavy cleaning. The bristles are long and dense, suitable for cleaning any deep and shallow surfaces, light and heavy dirt has nowhere to escape.
- Connecting hose, cleaning more convenient . With the hose attachment attached, the car wash brush can be used as a cycle brush or soaking brush for cars. Can also be used to clean window glass, tile surfaces, floor surfaces, interior floors and most surfaces. With detergent foam and soapy water, it can clean tires, wheels, door mats, pedals, bumpers, fenders, rims, undercarriage, etc.
- Easy to carry The bristles are resilient and not easily deformed, can be used for car rv suv truck camping boat exterior cleaning and cleaning
- See more on Amazon...
Brand: GIANT BEAR | Manufacturer: XSS-T002-HG010
Dimensions: 3.82 x 10.43 x 3.35 inches | Weight: 0.91 Pounds
Warranty: 2 years.
See On Amazon #18
GOOACC 19Pcs Trim Removal Tool Set Panel Fastener Clips Removal Automotive Plastic Upholstery Pliers Removal Install Removal Car Tool with Storage Bag for Trim Panel Audio Clip Pliers Terminal-Black
Asin: B0CGH9QZZG | Model: GRC-217 | PartNumber: GRC-217 | Ean: 0840323907446 | UPC: 840323907446
【Good Helper】Whenever You Need Them, They Are Always Here To Help You. It Will Be An Excellent Choice For You To Work On Your Car With This Set.
【Package Include】 Including 11Pcs Interior Trim Disassemble Tools, 2Pcs Release Tools, 2Pcs Stereo Removal Tools, 3Pcs Car Terminal Removal Tools, 1Pc Trim Clip Removal Pliers, And A Portable Storage Bag.
【No Damaging:】These Tools Helps You Work On Your Car Easily Without Damaging It. It Won’T Scratch Or Damage Your Car Like Some Poor Quality Tools.
【Premium Grade Nylon】Made Of Impacted Resistant Nylon Fiber Material With High Level Craftsmanship, It’S Non-Toxic And Have Long Last, Not Like Brittle Material Which Is Easy To Bent Or Crack.
Features
- Multi-function tools There are 19 pcs different kinds of car panel removal tools, excellent for Automotive, Marine, Furniture or Aircraft Trim removal and installation, including Car Panels, Moldings, Window Trims, Clips, Fasteners, Emblems, Panels, Radios, etc...
- Premium Grade Nylon Made of impacted resistant nylon fiber material with high level craftsmanship, it s non-toxic and have long last, not like brittle material which is easy to bent or crack
- Good helper Whenever you need them, they are always here to help you. It will be an excellent choice for you to work on your car with this set
- No damaging: These tools helps you work on your car easily without damaging it. It won t scratch or damage your car like some poor quality tools
- Package Include Including 11pcs interior trim disassemble tools, 2pcs release tools, 2pcs stereo removal tools, 3pcs Car terminal removal tools, 1pc Trim Clip Removal Pliers, and a portable storage bag
- See more on Amazon...
Brand: GOOACC | Manufacturer: GOOACC
Warranty: 2 Years Warranty
See On Amazon #19
1pcs 3D Car 4MATIC Logo ABS Letter Emblem Decal for Car Side Fender Rear Trunk Emblem Badge Chrome Decal Sticker (4-MAT-Silver)
Asin: B0919WDVV6 | Model: SADKUNF-213 | PartNumber: SADKUNF-213 | Ean: 0717361631483 | UPC: 717361631483
They Can Be Replaced At Any Time And Are Removable. They Offer A Cost Effective Way To Cover Up Scratches On Your Paintwork..
3D Abs Plating Chrome Premium Car Emblem，Never Fade & Water Proof & 3M Self Adhesive! Do Not Need Extra Glue And Other Items..
It Is Very Convenient To Paste It Where You Need It,Do Not Need Extra Glue And Other Items.Decoration And Personalize Your Car. Dry, Clean, No Oil, No Wax In The Water For Three Days;And No Washing For Car Within 48 Hours..
Easy To Install , Strong Glue.Very Easy To Install, Not Need Any Tools, Just Peel And Stick It On The Vehicles . Tips : Be Sure To Thoroughly Clean The Surface To Assure Longevity Of The Adhesive Before Applying.
Features
- Genuine Size, Made of high quality ABS plastic,Luxury Emblem.
- Easy to install , strong glue.Very easy to install, not need any tools, just peel and stick it on the vehicles . Tips : Be sure to thoroughly clean the surface to assure longevity of the adhesive before applying
- They can be replaced at any time and are removable. They offer a cost effective way to cover up scratches on your paintwork.
- It is very convenient to paste it where you need it,Do not need extra glue and other items.Decoration and personalize your car. dry, clean, no oil, no wax in the water for three days;and no washing for car within 48 hours.
- 3D ABS plating Chrome Premium Car Emblem Never Fade & Water Proof & 3M Self Adhesive! Do not need extra glue and other items.
- See more on Amazon...
Brand: Sadkunf | Manufacturer: Sadkunf
Warranty: 90
See On Amazon #20
835 PCS Car Push Retainer Clips and Plastic Fasteners Kit - 24 Sizes Nylon Bumper Fender Clips Plastic Rivets with Fasteners Removal Tool for Toyota GM Ford Honda Acura Chrysler Blue
Asin: B0BLNKP9J9 | Ean: 8425520186904
Tough Fastener Remover - Tough Plastic And Metal Material Allow You To Quickly And Easily Remove Car Door Panel And Upholstery Clips Without Any Damage. Easy Access Into Confined Areas..
Easy To Carry--- Car Body Clips Come With A Storage Box, Compact Size, Light Weight, Easy To Carry And Organize..
Save Time And Money – No Need To Go To A Auto Parts Store And Look For Different Fasteners. We Have Them In Box For What You Need. You Also Can Share With Your Families And Friends..
Premium Quality - Car Plastic Rivets Are Made With High-Quality Nylon Material, Which Is Strong, Robust And Vibration Resistant, Would Not Break Or Crack Easily..
Features
- UNIVERSAL FIT KIT - 24 most popular sizes Bumper Clips Kit fit for car trim door panel, bumper, Fender, engine cover and splash shield retainers replacement for Ford, GM, Honda, Toyota, Chrysler and more.
- PREMIUM QUALITY - Car Plastic Rivets are made with high-quality nylon material, which is strong, robust and vibration resistant, would not break or crack easily.
- TOUGH FASTENER REMOVER - Tough Plastic and Metal material allow you to quickly and easily remove car door panel and upholstery clips without any damage. Easy access into confined areas.
- SAVE TIME AND MONEY No need to go to a auto parts store and look for different fasteners. We have them in box for what you need. You also can share with your families and friends.
- EASY TO CARRY--- Car Body Clips come with a storage box, Compact size, light weight, easy to carry and organize.
- See more on Amazon...
Brand: GLK | Manufacturer: GLK
Dimensions: 6.88 x 6.69 x 6.77 inches
See On Amazon
Looking For Something Else?
Search