Xin Tester HT306 Universal Breakout Leads, 6 Channel Test Lead Set for Automotive Oscilloscope Diagnostic (1.5mm Blue)
Asin: B0CP25NVCY
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.Each Lead Has 6 Blades Wired To 6 Sockets, Allowing You To Insert It Between A Plug And Socket Pair, Other Ends Are 6 "Banana" (4 Mm) Sockets..
5.The 6-Way Leads Are Convenient To Use, Efficient, Safe And Stable. They Are Easy To Access The Existing Automotive Wiring Harness And Can Read The Signals Of Various Sensors Well..
6.The Output Signal From The Other End Of The Lead 4 Mm Banana Connector By Ht30a Test Line Access Oscilloscope Input Port..
4.Ht306 Breakout Leads Allow An Oscilloscope To Connect Variety Of Components In The Engine Compartment, Without Having To Strip Or Pierce Any Insulation And With No Risk Of Damage To Connectors..
2. Package Includes 6-Way Breakout Leads With 1.5 Mm (Blue) Connectors..
Features
- 1.With these universal test lead set, you will be able to test most of the sensors and actuators on all makes and models of vehicle, including MAP, temperature, throttle position and airflow sensors, fuel pumps, primary ignition circuits and fuel injectors.
- 2. Package includes 6-way breakout leads with 1.5 mm (blue) connectors.
- 3.Each lead has 6 blades wired to 6 sockets, allowing you to insert it between a plug and socket pair, other ends are 6 banana (4 mm) sockets.
- 4.HT306 breakout leads allow an oscilloscope to connect variety of components in the engine compartment, without having to strip or pierce any insulation and with no risk of damage to connectors.
- 5.The 6-way leads are convenient to use, efficient, safe and stable. They are easy to access the existing automotive wiring harness and can read the signals of various sensors well.
- 6.The output signal from the other end of the lead 4 mm banana connector by HT30A test line access oscilloscope input port.
- See more on Amazon...
Brand: Xin Tester | Manufacturer: Xin Tester
See On Amazon Similar To Xin Tester HT306 Universal Breakout
#1
diymore LCR Meter Transistor Tester,Transistor Meter,LCR-TC1 Multi-Function Transistor Capacitor Tester ESR Tester Full Color Display Automatic Checker Detector for Diode Triode LCR ESR NPN PNP
Asin: B0CGRRN7SW
【Add Ir Decoder】: After The Component Detection Is Completed,The Infrared Remote Control At The Tester "Ir" Test Hole,Press The Remote Control Key,The Tester Will Be Display The User Code & Data Code And The Corresponding Infrared Waveform After The Successful Decoding..
【Attachment 】: Any Situations,Please Feel Free To Contact Us By Email,Especially When You Need The Manual..
【Auto Shut-Down Function】:Our Advanced Electronic Transistor Tester With Automatic Shutdown And Manual Shut-Down Function.Use Accessories,More Convenient And Efficient To Complete Your Project..
【Battery Powered】:Built-In Lithium Battery, Convenient And Effective,The Indicator Light Shows Green When Fully Charged. Warm Reminder:The Charging Input Voltage Is 4.5V, Please Do Not Use It Under Over Pressure, Otherwise The Tester Will Be Damaged..
Features
- Wild Application :Automatic detection of NPN and PNP transistors,n-channel and p-channel MOSFET,diode (including double diode), thyristor, Mega328,BJT,resistor and capacitor and various electric transistor testing.
- BATTERY POWERED :Built-in lithium battery, convenient and effective,the indicator light shows green when fully charged. Warm Reminder:The charging input voltage is 4.5V, please do not use it under over pressure, otherwise the tester will be damaged.
- Add IR Decoder : After the component detection is completed,the infrared remote control at the tester IR test hole,press the remote control key,the tester will be display the user code & data code and the corresponding infrared waveform after the successful decoding.
- Auto shut-down Function :Our advanced electronic transistor tester with automatic shutdown and manual shut-down function.use accessories,more convenient and efficient to complete your project.
- Attachment : Any situations,please feel free to contact us by email,especially when you need the manual.
- See more on Amazon...
Brand: diymore | Manufacturer: diymore
See On Amazon #2
Transistor Meter, Aideepen LCR-TC1 Multi-Function Capacitance Resistance ESR Tester 1.8" Full Color Display Transistor Meter for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET
Asin: B08YNB7K8G | Model: 2_051055 | PartNumber: 2_051055
【Add Ir Decoder】: After The Component Detection Is Completed, The Infrared Remote Control At The Tester "Ir" Test Hole, Press The Remote Control Key, The Tester Will Be Display The User Code & Data Code And The Corresponding Infrared Waveform After The Successful Decoding.
【Extra Accessories】: Use Accessories, More Convenient And Efficient To Complete Your Project(Please Refer "Product Guides And Documents"To Get User Manual).
【Auto Shut-Down Function】: Our Advanced Electronic Transistor Tester Owns Auto Shut-Down Function.Convenient And Practical..
【Built-In Battery】:Built-In Lithium Battery, Convenient And Effective, The Indicator Light Shows Green When Fully Charged. Warm Reminder: The Charging Input Voltage Is 4.5V, Please Do Not Use It Under Overpressure, Otherwise The Tester Will Be Damaged..
Features
- Wild Application :1.8" Full Color Display,Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, Mega328,BJT, resistor and capacitor and various electric transistor testing.
- Built-in Battery :Built-in lithium battery, convenient and effective, the indicator light shows green when fully charged. Warm Reminder: The charging input voltage is 4.5V, please do not use it under overpressure, otherwise the tester will be damaged.
- Add IR Decoder : After the component detection is completed, the infrared remote control at the tester IR test hole, press the remote control key, the tester will be display the user code & data code and the corresponding infrared waveform after the successful decoding
- Auto shut-down Function : Our advanced electronic transistor tester owns auto shut-down function.Convenient and practical.
- Extra accessories : use accessories, more convenient and efficient to complete your project(Please refer Product guides and documentsto get user manual)
- See more on Amazon...
Brand: Aideepen | Manufacturer: Aideepen
See On Amazon #3
LCR-T4 Mega328 Digital Transistor Tester Resistance Capacitance Diode Triode Capacitance Resistance ESR Meter MOS PNP NPN LCR with Case
Asin: B07WT9VVZB | Model: 15370 | PartNumber: 15370
High Test Speed, Valid Component Test: 2 Seconds (Except In The Larger Capacitor Of Large Capacitance Measurement Also Takes A Long Time, The Measured Time Of One Minute Is Normal).
Auto Power Off Function To Avoid Unnecessary Waste, Saving Battery Power, Improved Battery Life.
128*64 Big Backlight Lcd Display,Only 2Ma When Stand By..
Can Detect The Transistor, Mosfet Protection Diode Amplification Coefficient And The Base To Determine The Emitter Transistor Forward Biased Voltage..
Features
- Test ranges:Inductors, capacitors , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube, ESR, Resistance, Adjustable potentiometer
- Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage.
- High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal)
- 128*64 big Backlight LCD display,only 2mA when stand by.
- Auto power off function to avoid unnecessary waste, saving battery power, improved battery life
- See more on Amazon...
Brand: AITRIP | Manufacturer: AiTrip
Weight: 0.02 Pounds
See On Amazon #4
diymore LCR Meter Transistor Tester,Transistor Meter,Mosfet Transistor Capacitor Tester Multi-Function Transistor Capacitor Tester Automatic Checker Detector for Diode Triode LCR NPN PNP
Asin: B0CW9SDFRR | Model: A1_GXRB0026-AAA_US | PartNumber: A1_GXRB0026-AAA_US
【Add Ir Decoder】: After The Component Detection Is Completed,The Infrared Remote Control At The Tester "Ir" Test Hole,Press The Remote Control Key,The Tester Will Be Display The User Code & Data Code And The Corresponding Infrared Waveform After The Successful Decoding..
【Attachment 】: Any Situations,Please Feel Free To Contact Us By Email,Especially When You Need The Manual..
【Auto Shut-Down Function】:Our Advanced Electronic Transistor Tester With Automatic Shutdown And Manual Shut-Down Function.Use Accessories,More Convenient And Efficient To Complete Your Project..
【Battery Powered】:Built-In Lithium Battery, Convenient And Effective,The Indicator Light Shows Green When Fully Charged. Warm Reminder:The Charging Input Voltage Is 4.5V, Please Do Not Use It Under Over Pressure, Otherwise The Tester Will Be Damaged..
Features
- Wild Application :Automatic detection of NPN and PNP transistors,n-channel and p-channel MOSFET,diode (including double diode), thyristor, Mega328,BJT,resistor and capacitor and various electric transistor testing.
- BATTERY POWERED :Built-in lithium battery, convenient and effective,the indicator light shows green when fully charged. Warm Reminder:The charging input voltage is 4.5V, please do not use it under over pressure, otherwise the tester will be damaged.
- Add IR Decoder : After the component detection is completed,the infrared remote control at the tester IR test hole,press the remote control key,the tester will be display the user code & data code and the corresponding infrared waveform after the successful decoding.
- Auto shut-down Function :Our advanced electronic transistor tester with automatic shutdown and manual shut-down function.use accessories,more convenient and efficient to complete your project.
- Attachment : Any situations,please feel free to contact us by email,especially when you need the manual.
- See more on Amazon...
Brand: diymore | Manufacturer: diymore
See On Amazon #5
HT306 4 Connectors Sizes Universal Breakout Leads, 6 Channel Test Lead Set for Automotive Oscilloscope Diagnostic, 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm
Asin: B09BNB159Y | Model: 6-Way Universal Breakout Leads | PartNumber: 6-Way Universal Breakout Leads | Ean: 0759784996398 | UPC: 759784996398
3.Each Lead Has 6 Blades Wired To 6 Sockets, Allowing You To Insert It Between A Plug And Socket Pair, Other Ends Are 6 "Banana" (4 Mm) Sockets..
5.The 6-Way Leads Are Convenient To Use, Efficient, Safe And Stable. They Are Easy To Access The Existing Automotive Wiring Harness And Can Read The Signals Of Various Sensors Well..
6.The Output Signal From The Other End Of The Lead 4 Mm Banana Connector By Ht30a Test Line Access Oscilloscope Input Port..
4.Ht306 Breakout Leads Allow An Oscilloscope To Connect Variety Of Components In The Engine Compartment, Without Having To Strip Or Pierce Any Insulation And With No Risk Of Damage To Connectors..
2. The 6-Way Breakout Leads Are Available With 4 Different Sizes Of Connectors: Micro: 0.6 Mm, Small: 1.5 Mm, Medium: 2.3 Mm Large: 2.8 Mm..
Features
- 1.With these universal test lead set, you will be able to test most of the sensors and actuators on all makes and models of vehicle, including MAP, temperature, throttle position and airflow sensors, fuel pumps, primary ignition circuits and fuel injectors.
- 2. The 6-way breakout leads are available with 4 different sizes of connectors: micro: 0.6 mm, small: 1.5 mm, medium: 2.3 mm large: 2.8 mm.
- 3.Each lead has 6 blades wired to 6 sockets, allowing you to insert it between a plug and socket pair, other ends are 6 banana (4 mm) sockets.
- 4.HT306 breakout leads allow an oscilloscope to connect variety of components in the engine compartment, without having to strip or pierce any insulation and with no risk of damage to connectors.
- 5.The 6-way leads are convenient to use, efficient, safe and stable. They are easy to access the existing automotive wiring harness and can read the signals of various sensors well.
- 6.The output signal from the other end of the lead 4 mm banana connector by HT30A test line access oscilloscope input port.
- See more on Amazon...
Brand: Xin Tester | Manufacturer: Xin Tester
Dimensions: 4.68 x 94.44 x 4.68 inches | Weight: 0.10 pounds
See On Amazon #6
HiLetgo LCR-T4 Multifunctional Resistor Capacitor Diode SCR Inductor Triode MOSFET Tube Meter Tester component tester kit 9V with 128 * 64 Green Backlight LCD Display
Asin: B01MYU0QI3
Automatic Detection Of Npn And Pnp Transistors, N-Channel And P-Channel Mosfet, Diodes, Triodes, Resistors, Capacitors Or Other Devices.
Measure The Gate Threshold Voltage And Gate Capacitance Of The Mosfet,Measure Bipolar Transistor Current Amplification Factor And Base-Emitter Threshold Voltage.
Use 9V Battery(Not Included), Can Also Use Dc Power(Dc 6.8-12V). Automatic Shutdown, Shutdown Current Is Only About 20Na..
Short Detection Time: Only 1.7 Seconds. It Is Normal To Take 1 Minute For Bulk Capacitor Detection.
Features
- Digital 128*64 LCD display for easy readings, can display measured data and graphics.
- Short detection time: only 1.7 seconds. It is normal to take 1 minute for bulk capacitor detection
- Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, triodes, resistors, capacitors or other devices
- Use 9V battery(not included), can also use DC power(DC 6.8-12V). Automatic shutdown, shutdown current is only about 20nA.
- Measure the gate threshold voltage and gate capacitance of the MOSFET,Measure bipolar transistor current amplification factor and base-emitter threshold voltage
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.10 pounds
See On Amazon #7
WWZMDiB LCR-TC1 Multi-Function Capacitance Resistance ESR Tester 1.8" Full Color Display Transistor Meter for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET
Asin: B0BLSKW861 | Model: LCR-TC1 | PartNumber: LCR-TC1 | Ean: 0618202521041 | UPC: 618202521041
🥈After Detection, Align The Infrared Remote Control With The "Ir" Light, Then Press The Button In The Remote Control, If The Detector Successfully Decode It, It Will Display The Data Code And Infrared Wave Form..
🥉One Button Operation, Automatically Detect And Shutdown, And You Can Also Press The Multi-Functional Button To Close The Detector..
🥇Put The Pins Of Component In Corresponding Area, Then Dial The Little Handle And The Detector Will Test It Automatically, Finally The Results Will Display On The Back Light Tft Screen Clearly..
Features
- LCR-TC1 Multi-Function Capacitance Resistance ESR Tester Can measure three tube, two tube, resistance, capacitance, inductance, thyristor, field effect tube, voltage regulator, double two tube, light emitting two tube, infrared decoding.
- Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.
- After detection, align the infrared remote control with the IR light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
- One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector.
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #8
HT306 Breakout Leads - Universal Test Lead Set for Auto Diagnostic Oscilliscope, 6 Channel (2.8mm black)
Asin: B07QXZ79J2 | Ean: 0728614518659 | UPC: 728614518659
The Breakout Lead Is Connected To The Input Port Of The Oscilloscope Through The Ht30a Test Line, And The Signal At The Other End Of The 4Mm Banana Line Is Output. Can Greatly Reduce The Failure Rate. Wide Range Of Applications..
The Test Lead Set Allows The Oscilloscope To Connect To Various Components In The Engine Bay Without Stripping Or Piercing Any Insulation And Risking Damage To The Connectors..
The Universal Test Lead Set Spurs Are Available In 4 Different Sizes Of Connectors: 0.6 Mm, 1.5 Mm, 2.3 Mm And 2.8 Mm. Light Weight And Small Size. With Reliability And Miniaturization, Good Maintenance And Interchangeability..
The Wire Is Easy To Connect To The Existing Automobile Wiring Harness, And It Is Convenient To Read The Signals Of Various Sensors. Good Practicality. Easy To Use. High Efficiency, Safety And Stability..
Features
- The 6-way automobile multi-function line (HT306) does not need to be equipped with many special lines for engine diagnosis. Flexible wiring to meet various work needs.
- The wire is easy to connect to the existing automobile wiring harness, and it is convenient to read the signals of various sensors. Good practicality. easy to use. High efficiency, safety and stability.
- The breakout lead is connected to the input port of the oscilloscope through the HT30A test line, and the signal at the other end of the 4mm banana line is output. Can greatly reduce the failure rate. Wide range of applications.
- The Universal Test Lead Set spurs are available in 4 different sizes of connectors: 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm. Light weight and small size. With reliability and miniaturization, good maintenance and interchangeability.
- The test lead set allows the oscilloscope to connect to various components in the engine bay without stripping or piercing any insulation and risking damage to the connectors.
- See more on Amazon...
Brand: Samfox | Manufacturer: Samfox
Weight: 0.08 pounds
See On Amazon #9
ACEIRMC LCR-TC1 Multi-Function Tester Colorful Display Pocketable Multifunctional TFT Backlight Transistor 1.8 inch for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET (LCR-TC1)
Asin: B08K3BGKXC | Model: 16543 | PartNumber: 16543 | Ean: 0701715445734 | UPC: 701715445734
Measurement Results Represent By Tft Graphic Display(160X128). Support Chinese And English..
One Button Operation, Automatically Detect And Shutdown, And You Can Also Press The Multi-Functional Button To Close The Detector..
After Detection, Align The Infrared Remote Control With The "Ir" Light, Then Press The Button In The Remote Control, If The Detector Successfully Decode It, It Will Display The Data Code And Infrared Wave Form..
Put The Pins Of Component In Corresponding Area, Then Dial The Little Handle And The Detector Will Test It Automatically, Finally The Results Will Display On The Back Light Tft Screen Clearly. ( Use 12864 Liquid Crystal Display With Green Backlight)..
Features
- For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc.
- Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight).
- Measurement results represent by TFT graphic display(160x128). Support Chinese and English.
- After detection, align the infrared remote control with the IR light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
- One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #10
LCR-TC1 Colorful Display Pocketable Multifunctional TFT Backlight Transistor Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET
Asin: B07X5YS1JN | Model: 3.5" | PartNumber: 3.5" | Ean: 0881556841626 | UPC: 881556841626
After Detection, Align The Infrared Remote Control With The "Ir" Light, Then Press The Button In The Remote Control, If The Detector Successfully Decode It, It Will Display The Data Code And Infrared Wave Form..
One Key Operation, Auto Power Off(Timeout Settable). Can Also Press The Multi-Functional Button To Close The Detector..
Measurement Results Represent By Tft Graphic Display(160X128). Support Chinese And English..
Put The Pins Of Component In Corresponding Area, Then Dial The Little Handle And The Detector Will Test It Automatically, Finally The Results Will Display On The Back Light Tft Screen Clearly. ( Use 12864 Liquid Crystal Display With Green Backlight)..
Features
- For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc.
- Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight).
- After detection, align the infrared remote control with the IR light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
- Measurement results represent by TFT graphic display(160x128). Support Chinese and English.
- One key operation, Auto Power Off(Timeout Settable). Can also press the multi-functional button to close the detector.
- See more on Amazon...
Brand: YWNYT | Manufacturer: YWNYT
See On Amazon #11
Multifunction Meter DIY kit, ACEIRMC Mega 328 Graphic Transistor Tester, NPN PNP Diodes Triode Capacitor ESR SCR MOSFET Resistor Inductance LCD Display Checker with case
Asin: B07T6FKHM6 | Model: 10529 | PartNumber: 10529 | Ean: 0701715432550 | UPC: 701715432550
Can Be In The Correct Order And The Diode Symbol Display Two Diodes , And Gives The Diode Forward Voltage.
Package: 1 * Lcr-T4 Mega328 Transistor Tester 1* Lcr-T4 Mega328 Transistor Tester Case.
Measure Capacitancecan Measure Capacitance Of 30Pf-100Mf , Resolution 1Pf.
Can Detect The Transistor, Mosfet Protection Diode Amplification Coefficient And The Base To Determine The Emitter Transistor Forward Biased Voltage.
Features
- Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, transistor, resistor and capacitor and other components
- Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage
- Can be in the correct order and the diode symbol display two diodes , and gives the diode forward voltage
- measure capacitanceCan measure capacitance of 30pF-100mF , resolution 1pF
- Package: 1 * LCR-T4 Mega328 Transistor Tester 1* LCR-T4 Mega328 Transistor Tester Case
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: Organizer
Weight: 0.22 pounds
See On Amazon #12
AITRIP LCR-TC1 Colorful Display Pocketable Multifunctional TFT Backlight Transistor Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET with 1.8 inch Colorful Display
Asin: B08K38XP8G | Model: 169LCD2028 | PartNumber: 169LCD2028 | Ean: 0701715444133 | UPC: 701715444133
Put The Pins Of Component In Corresponding Area, Then Dial The Little Handle And The Detector Will Test It Automatically, Finally The Results Will Display On The Back Light Tft Screen Clearly..
Operating Instructions : Short Press: Press The Key And Not Less Than 10 Ms, Release Key Within 1.5 Seconds ; Long Press: Press The Key More Than 1.5 Seconds.
After Detection, Align The Infrared Remote Control With The "Ir" Light, Then Press The Button In The Remote Control, If The Detector Successfully Decode It, It Will Display The Data Code And Infrared Wave Form..
Features
- This transistor tester is built-in large-capacity rechargeable lithium battery-350mAh Included, lithium battery voltage detection, Automatic measurement of voltage stabilizing diode (0.01-30V).
- After detection, align the infrared remote control with the IR light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
- Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.
- Operating Instructions : Short press: Press the key and not less than 10 ms, release key within 1.5 seconds ; Long press: Press the key more than 1.5 seconds
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #13
TSH06F Integrated Circuit Tester Multi Functional IC Transistor Meter with 5V 3.3V AUTO Modes for Microelectronics Engineers Maintenance (with Terminal)
Asin: B0BJNT1J5K | Model: Walfrontwxh3u4ktgb-11 | PartNumber: Walfrontwxh3u4ktgb-11
Efficient Testing: The Integrated Circuit Meter Includes More Than 1300 Types Of Built-In Chip Data And More Than 420 Types Of Transistor Data , Covering Most Common Devices Within 24 Pins, Greatly Reducing Workload And Improving Work Efficiency..
Automatic Shutdown: The Integrated Circuit Tester Automatically Shuts Down After 60 Seconds Without Any Operation. Compact And Portable Design, Suitable For Circuit Testing..
Various Applications: Test Types Include Logic Device Test, Interface Driver Device Test, Operational Amplifier, Comparison Test, Transistor Identification, Voltage Regulator Value Test, Optical Coupler..
Main Uses: 74Hc Series, 74Ls Series, Cd4000 Series, Hef400 Series, 4500 Series, Operational Amplifier, Interface Chip, Optical Coupler, Automatic Transistor Identification, Voltage Regulator Identification, Etc..
Features
- Multiple Measurement Modes: Multifunctional integrated circuit tester is a professional instrument designed for microelectronics engineers and maintenance personnel. Different test modes can be selected, such as 5V mode, 3.3V mode, AUTO mode, etc.
- Main Uses: 74HC series, 74LS series, CD4000 series, HEF400 series, 4500 series, operational amplifier, interface chip, optical coupler, automatic transistor identification, voltage regulator identification, etc.
- Efficient Testing: The integrated circuit meter includes more than 1300 types of built-in chip data and more than 420 types of transistor data , covering most common devices within 24 pins, greatly reducing workload and improving work efficiency.
- Various Applications: Test types include logic device test, interface driver device test, operational amplifier, comparison test, transistor identification, voltage regulator value test, optical coupler.
- Automatic Shutdown: The integrated circuit tester automatically shuts down after 60 seconds without any operation. Compact and portable design, suitable for circuit testing.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
See On Amazon #14
Treedix LCR-TC1 Meter Graphical Transistor Tester 1.8 inch TFT Graphic Display Resistance Capacitance Meters Multi-Function Tester LCR/ESR/NPN/PNP/MOSFET
Asin: B08B6412BD | Model: TRX2-0151 | PartNumber: TRX2-0151 | Ean: 0765756508568 | UPC: 765756508568
One Button Operation, Automatically Detect And Shutdown, And You Can Press The Multi-Functional Button To Shut Down The Detector Manually..
Unlike The Usual Black And White Display, This Detector Can Show Display The Data In Color..
Put The Pins Of Component In The Corresponding Area, Then Dial The Little Handle And The Detector Will Test It Automatically With The Results Displayed On The Back Light Tft Screen Clearly..
It Can Detect Infrared Wave Forms And Detect Zener Diode (0.01-30V), And Has The Automatic Calibration Function..
Features
- Automatic measurement of NPN and PNP transistors, N-channel and P-channel field effect transistors, diodes (including dual diodes), small resistance (including potentiometers), inductance, capacitance, thyristors, batteries (0.1-45V) and other devices.
- It can detect infrared wave forms and detect zener diode (0.01-30V), and has the automatic calibration function.
- One button operation, automatically detect and shutdown, and you can press the multi-functional button to shut down the detector manually.
- Put the pins of component in the corresponding area, then dial the little handle and the detector will test it automatically with the results displayed on the back light TFT screen clearly.
- Unlike the usual black and white display, this detector can show display the data in color.
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
Dimensions: 0.98 x 3.54 x 1.96 inches | Weight: 0.22 Pounds
See On Amazon #15
HT306 Breakout Leads 6 Channel Universal Breakout HT306 Probe for Auto Diagnostic Oscilliscope, Black
Asin: B07G1V143X | Ean: 0715538046436 | UPC: 715538046436
【4 Sizes】: Ht306 Breakout Leads Is Available In 4 Different Connector Sizes. 0.6Mm, 1.5Mm, 2.3Mm And 2.8Mm..
【After-Sales Service】: We Are Committed To Providing The Best Products And The Best Service. If You Have Any Questions About Our Products, Please Contact Us By Email. Our Professional Customer Service Team Will Promptly Reply And Solve Your Problems!.
【More Secure】: They Allow The Oscilloscope To Be Connected To Various Components In The Engine Compartment Without Having To Strip Or Pierce Any Insulation And Without The Risk Of Damaging The Connectors..
【Easy To Read】: The Is Easy To Plug Into Existing Automotive Wiring Harnesses For Easy Reading Of From Various Sensors. The Output Is Routed From The 4Mm Banana Connector On The Other End Of The Wire To The Oscilloscope Input Port Via The Ht30a Test ..
Features
- 6-channel : The 6-channel automotive multifunction (HT306) can be used for engine diagnostics without having to be equipped with many special leads.
- Easy to read : The is easy to plug into existing automotive wiring harnesses for easy reading of from various sensors. The output is routed from the 4mm banana connector on the other end of the wire to the oscilloscope input port via the HT30A test .
- 4 sizes : HT306 Breakout Leads is available in 4 different connector sizes. 0.6mm, 1.5mm, 2.3mm and 2.8mm.
- More secure : They allow the oscilloscope to be connected to various components in the engine compartment without having to strip or pierce any insulation and without the risk of damaging the connectors.
- After-sales service : We are committed to providing the best products and the best service. If you have any questions about our products, please contact us by email. Our professional customer service team will promptly reply and solve your problems!
- See more on Amazon...
Brand: Akozon
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #16
shenruifa TSH 06F Integrated Circuit Tester IC Transistor Meter with 5V 3.3V AUTO Modes for Microelectronics Engineers (No terminals)
Asin: B0CZ74YC93 | Model: shenruifapxutow79iv-12 | PartNumber: shenruifapxutow79iv-12
Efficient Measurement With More Than 1,300 Types Of Built In Chip Data Models And More Than 420 Types Of Transistor Data Models, Covering Most Common Devices Within 24 Pins, Greatly Reduce Workload And Improve Work Efficiency..
Automatic Shutdown Function The Integrated Circuit Tester Will Automatically Shut Down After 60 Seconds Without Any Operation. Small And Portable Design, Suitable For Circuit Testing..
Testing Types Include Logic Device Test, Interface Driver Device Test, Op Amp, Comparison Test, Transistor Identification, Voltage Regulator Voltage Value Test, Optocoupler..
Main Uses Test 74Hc Series, 74Ls Series, Cd4000 Series, Hef400 Series, 4500 Series, Operational Amplifiers, Interface Chips, Optocouplers, Automatic Transistor Identification, Voltage Regulator Voltage Identification, Etc..
Features
- MULTIPLE TEST MODES Multifunction integrated circuit tester is a professional instrument designed for microelectronics engineers and maintenance personnel. Different test modes can be selected, such as 5V mode, 3.3V mode, AUTO mode, etc.
- MAIN USES Test 74HC series, 74LS series, CD4000 series, HEF400 series, 4500 series, operational amplifiers, interface chips, optocouplers, automatic transistor identification, voltage regulator voltage identification, etc.
- EFFICIENT MEASUREMENT With more than 1,300 types of built in chip data models and more than 420 types of transistor data models, covering most common devices within 24 pins, greatly reduce workload and improve work efficiency.
- TESTING TYPES Include logic device test, interface driver device test, op amp, comparison test, transistor identification, voltage regulator voltage value test, optocoupler.
- AUTOMATIC SHUTDOWN FUNCTION The integrated circuit tester will automatically shut down after 60 seconds without any operation. Small and portable design, suitable for circuit testing.
- See more on Amazon...
Brand: shenruifa | Manufacturer: shenruifa
See On Amazon #17
6 Channel Universal Breakout Breakout Leads, Ht306 Leads Ht306 for Auto Diagnostic Oscilliscope (Black)
Asin: B0C5RX381P | Model: LiebeWH375g0bxrs1-04 | PartNumber: LiebeWH375g0bxrs1-04
6 Channel Car Multifunctional (Ht306) Do Not Need To Be Equipped With Many Special Wire To Be Used For Engine Diagnosis.
The Output From The Other End Of The 4 Mm Banana Connector By Ht30a Test Line Access Oscilloscope Input Port.
The Breakout Leads Are Available With 4 Different Sizes Of Connectors: 0.6 Mm, 1.5 Mm, 2.3 Mm And 2.8 Mm.
The Wire Is Easy To Access The Existing Automotive Wiring Harness, Convenient To Read The Of Various Sensors.
Features
- They allow an oscilloscope to to connect to variety of components in the engine compartment, without having to strip or pierce any insulation and with no of damage to connectors
- The wire is easy to access the existing automotive wiring harness, convenient to read the of various sensors
- 6 channel car multifunctional (HT306) do not need to be equipped with many special wire to be used for engine diagnosis
- The breakout leads are available with 4 different sizes of connectors: 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm
- The output from the other end of the 4 mm banana connector by HT30A test line access oscilloscope input port
- See more on Amazon...
Brand: LiebeWH | Manufacturer: LiebeWH
See On Amazon
Looking For Something Else?
Search