Printer Accessories Main Controller PCB FK2-3701 for Compatible with Canon MF4150 4150 Formatter Logic Board Motherboard Printer Parts
Asin: B0CPSFP5RW | Model: NOTRYA | PartNumber: NOTRYA | Ean: 9175769112422
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Durable And Sturdy.
Part Number: Fk2-3701.
Quality: Original And Good Quality.
Part Name: Formatter Board.
Model: Mf4150.
After Sales Guarantee.
Packing: Neutral Packing.
Perfect Replacement.
Features
- Easy to install
- Perfect replacement
- Durable and sturdy
- After sales guarantee
- Part Name: Formatter Board
- Model: MF4150
- Part Number: FK2-3701
- Quality: Original and good quality
- Packing: Neutral packing
- See more on Amazon...
Brand: NOTRYA | Manufacturer: NOTRYA
Weight: 0.11 pounds
See On Amazon Similar To Printer Accessories Main Controller PCB
#1
ELEGOO 32 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering with 5 Sizes Compatible with Arduino Kits
Asin: B072Z7Y19F | Model: EL-CP-021 | PartNumber: EL-CP-021
â
4 Mounting Holes At The Corners Of The Board Are Very Convenient For Installing Them Together..
â
High Quality Of Durable Glass Fiber âFr4 Material With 1.6Mm Thickness Makes A Very Solid And Sturdy Prototype Circuit Board.
â
Pre-Tinned Plated Holes On The Board Make It Very Handy To Solder Components And Sensors For Your Projects.
â
5 Different Size Boards To Meet Your Demands When Designing Your Own Arduino Kits, Electronic Experiments And Diy Projects.
Features
- 32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out
- 5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects
- 4 mounting holes at the corners of the board are very convenient for installing them together.
- Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects
- High quality of durable glass fiber FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Dimensions: 0.61 x 5.41 x 3.27 Inches | Weight: 0.57 pounds
See On Amazon #2
Smraza 104pcs Double Sided PCB Board Kit, Prototype Boards for DIY Soldering and Electronic Project Circuit Boards Compatible with Arduino Kits, 30PCS 40 Pin 2.54mm Male and Female Header Connector
Asin: B07NM68FXK | Model: S36 | PartNumber: S36
Screw Terminal Block - 8 Pieces 5.08-301-2P And 5 Pieces 5.08-301-3P ; Pitch: 5.08Mm, Rated Voltage: 300V, Rated Current: 16A..
Environmental And Elegant Packaging - Compact Paper Package Take Little Footprint..
Jumper Caps - 30 Pieces Standard 2.54Mm Pin Spacing Circuit Board Jumper Cap In 6 Colors, 5 Pieces Per Color..
Header Connector - 10 Pieces 40 Pin Male Header, 10 Pieces 40 Pin Pitch Right Angle Male Headers, 10 Pieces 40 Pin Female Header; Pitch: 2.54Mm, Single Row And Straight Connector.
Features
- Selection of Multi-Sized Proto Boards - 31 pieces double-sided prototype boards of 5 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. 10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm, 5 pieces 5*7cm and 1 pieces 7*9cm PCB boards)
- Header Connector - 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header; pitch: 2.54mm, single row and straight connector
- Screw Terminal Block - 8 pieces 5.08-301-2P and 5 pieces 5.08-301-3P ; pitch: 5.08mm, rated voltage: 300V, rated current: 16A.
- Jumper caps - 30 pieces standard 2.54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color.
- Environmental and Elegant Packaging - Compact paper package take little footprint.
- See more on Amazon...
Brand: Smraza | Manufacturer: Smraza
See On Amazon #3
BIGTREETECH SKR Mini E3 V3.0 Control Board with TMC2209 UART Stepper Driver New Upgrade 32Bit 3D Printer Silent Board for Ender-3, Ender3 Pro, Ender-3 V2 3D Printer
Asin: B09LC34SCK | Model: KINGPRINTER-ZZB000590 | PartNumber: KINGPRINTER-ZZB000590 | Ean: 0778416923601 | UPC: 778416923601
ăHeating OutputăSupport Heating Hot End And Hot Bed Output. The Heating Indicator Light Will Light Up When The Heating Hot End Or Hot Bed Is Correctly Connected And Powered On. Please Connect The Wires In A Power-Off State, Otherwise It May Cause Static Breakdown Of The Mosfet And Damage To The Control Board..
ăOutput Power SupplyăIncrease Spi Output Port +3.3V Power Supply, External Spi Sensor Power Supply Voltage +3.3V And +5V Are Optional, Support The Motherboard To Directly Supply Power To Peripherals..
ăHeat Sink UpgradeăRedesign The Drive Heat Sink, Strengthen The Drive Heat Dissipation Capacity, And Greatly Improve The Heat Dissipation Performance; There Are 4 Tmc2209 Silent Drivers Onboard The Motherboard..
ăThree Cnc FanăIncrease The Heat Dissipation Controllable Fan To Reduce The Printer Temperature When The Device Is Working; The Fan Port Needs To Ensure That The Fan Voltage Specifications Are Consistent With The Motherboard Power Supply, Otherwise The Fan Will Have No Voltage..
Features
- Main Control Chip Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6; Add thermistor interface protection circuit to prevent damage to the main control chip.
- Three CNC Fan Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working; The fan port needs to ensure that the fan voltage specifications are consistent with the motherboard power supply, otherwise the fan will have no voltage.
- Heating Output Support heating hot end and hot bed output. The heating indicator light will light up when the heating hot end or hot bed is correctly connected and powered on. Please connect the wires in a power-off state, otherwise it may cause static breakdown of the MOSFET and damage to the control board.
- Heat Sink Upgrade Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance; There are 4 tmc2209 silent drivers onboard the motherboard.
- Output Power Supply Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #4
Sunxeke Double Sided PCB Board Kit for DIY Soldering and Electronic Project Circuit Boards Prototype Boards Compatible with Arduino Kits, 2.54mm Male and Female Header Connector
Asin: B0BWCFH57N | Model: N1-046 | PartNumber: N1-046
ăHeader Connector ăThe Pitch Is 2.54 Mm, 8 Pcs 40 Pin Male Header, 8 Pcs 40 Pin Pitch Right Angle Male Headers, 8 Pcs 40 Pin Female Header.
ăApplicationăTin-Plated Holes On The Double-Sided Circuit Board Allow You To Solder Diy Electronic Components. There Are Mounting Holes In The Corners Of The Circuit Board, Which Is Convenient For You To Assemble And Install..
ăMaterialăThis Product Is Made Of Fr4 Material With A Thickness Of 1.6 Mm, Which Belongs To Glass Fiber..
ăScrew Terminal Block And Jumper Capsă8Pcs 5.08-301-2P Screw Terminal Block And 6Pcs 5.08-301-3P Screw Terminal Block; 25 Pcs Standard 2.54Mm Pin Spacing Circuit Board Jumper Caps In 5 Colors, 5 Pcs Per Color..
Features
- Double Sided PCB Board 19pcs Double-sided prototype PCB boards Kit for DIY Soldering and Electronic Project Circuit Boards Compatible with Arduino Kits 6 pcs 20x80 mm,6 pcs 30x70 mm,3 pcs 40x60 mm,3 pcs 50x70 mm,1 pcs 70x90 mm
- Screw Terminal Block and Jumper caps 8pcs 5.08-301-2P screw terminal block and 6pcs 5.08-301-3P screw terminal block; 25 pcs standard 2.54mm pin spacing circuit board jumper caps in 5 colors, 5 pcs per color.
- Header Connector The pitch is 2.54 mm, 8 pcs 40 pin male header, 8 pcs 40 pin pitch right angle male headers, 8 pcs 40 pin female header
- Material This product is made of FR4 material with a thickness of 1.6 mm, which belongs to glass fiber.
- Application Tin-plated holes on the double-sided circuit board allow you to solder DIY electronic components. There are mounting holes in the corners of the circuit board, which is convenient for you to assemble and install.
- See more on Amazon...
Brand: Sunxeke | Manufacturer: Sunxeke
See On Amazon #5
BIGTREETECH EBB36 CAN Bus Adapter Board with MAX31865 Hot End PCB Board Filament Break Blockage Detection for 36 Stepper Motor Extruder Nozzle Head Tool for Blv Ender 3
Asin: B0B1MGSCDV | Model: 1020000370 | PartNumber: 1020000370
đSuperior Security: The Ebb Series Has Been Optimized In Multiple Dimensions In Terms Of Security. Usb Power-On Is Selected By Jumper Cap, Which Effectively Isolates The Dc-Dc And Usb 5V Of The Main Board, And Increases The Protection Circuit Of The Thermistor Part To Avoid The Burning Of The Main Control Chip Due To The Leakage Of The Heating Rod. The Usb Port Adds An Esd Protection Chip To Prevent The Main Control From Being Damaged. Electrostatic Breakdown Of The Usb Port..
đQuality Commitment: Q: When Updating Firmware, It May Be A Risk That The Heater Sticks Keep Heating Up A: Please Pay Attention To Disconnect The Main Power Vin Of The Hotend When Using The Dfu Of Type-C Port To Update The Firmware, Or Ensure That The Firmware Update Is Completed Soon And Goto The Normal Working Mode. Never Keep Mcu In Dfu Mode For A Long Time When The Main Power Supply And Hotend Are Connected.If You Still Have Any Questions, Please Feel Free To Contact Us.
đRich Expansion Functions: I2c Interface Is Reserved. This Port Can Also Be Used For Material Breakage, Material Blocking Detection, Or Diy Operations For Other Functions. The Factory Is Equipped With Terminals, Female Reeds, Double-Way Studs And Screws For Meet The Diy Needs Of Customers.
đEasy To Use: It Is A 36-Step (42-Step) Motor Extruder Nozzle Adapter Board, Which Can Communicate Through Usb Or Can, Which Greatly Simplifies Wiring. Boot And Reset Buttons Are Reserved On The Motherboard, Users Can Enter Dfu Mode Through Usb To Update The Firmware.
Features
- Smart Upgrade: Onboard MAX31865, support 2-wire/4-wire PT100/PT1000 selection, support CAN or USB communication, among which CAN terminal resistance 120R can be selected by jumper cap, and reserved CAN expansion interface, reserved RGB interface , to meet the lighting needs
- Easy to Use: It is a 36-step (42-step) motor extruder nozzle adapter board, which can communicate through USB or CAN, which greatly simplifies wiring. BOOT and RESET buttons are reserved on the motherboard, users can enter DFU mode through USB to update the firmware
- Superior Security: The EBB series has been optimized in multiple dimensions in terms of security. USB power-on is selected by jumper cap, which effectively isolates the DC-DC and USB 5V of the main board, and increases the protection circuit of the thermistor part to avoid the burning of the main control chip due to the leakage of the heating rod. The USB port adds an ESD protection chip to prevent the main control from being damaged. Electrostatic breakdown of the USB port.
- Rich Expansion Functions: I2C interface is reserved. This port can also be used for material breakage, material blocking detection, or DIY operations for other functions. The factory is equipped with terminals, female reeds, double-way studs and screws for Meet the DIY needs of customers
- Quality Commitment: Q: When updating firmware, it may be a risk that the heater sticks keep heating up A: please pay attention to disconnect the main power VIN of the hotend when using the DFU of Type-C port to update the firmware, or ensure that the firmware update is completed soon and goto the normal working mode. Never keep MCU in DFU mode for a long time when the main power supply and hotend are connected.If you still have any questions, Please feel free to contact us
- See more on Amazon...
Brand: BIQU | Manufacturer: Octobigtree
See On Amazon #6
QLOUNI 40pcs PCB Proto Boards SMD to DIP Adapter Plate Converter TQFP (32 44 48 64 84 100) SOP SSOP TSSOP 8 10 14 16 20 23 24 28
Asin: B07CJ96ZPW | Model: QLOUNI | PartNumber: QLOUNI | Ean: 0750440591155 | UPC: 750440591155
â
[Application] Apply To The Commonly Used Ssop16, Tssop16, Msop16 And Other Packages Transferred Into Dip.
â
[Warm Tips] Please Carefully Check The Size You Need Before Order If You Use It In Various Project.
â
[High Quality]All Pcb Prototype Boards Is Dual Sided And The Material Up To Fr-4 Class, So It Is Strong, And The Solder Of Parts Will Firm.
â
[Double Side Pcb Board Kit] One Side For Pin Pitch Size 0.65Mm/0.03", Other Is 1.27Mm/0.05", The Detail Size Please Pay Attention To The Picture.
Features
- [SMD to Dip PCB Board] Type: SOP SSOP TSSOP 8 10 14 16 20 23 24 28 & TQFP(32 44 48 64 84 100)
- [Double Side PCB board kit] One side for pin pitch size 0.65mm/0.03, other is 1.27mm/0.05, the detail size please pay attention to the picture
- [Application] Apply to the commonly used SSOP16, TSSOP16, MSOP16 and other packages transferred into DIP
- [High quality]All PCB prototype boards is dual sided and the material up to FR-4 class, so it is strong, and the solder of parts will firm
- [Warm tips] Please carefully check the size you need before order if you use it in various project
- See more on Amazon...
Brand: QLOUNI | Manufacturer: QLOUNI
See On Amazon #7
YUNGUI 11 Pcs Large PCB Board Kit,10x22 CM,15X9CM, 9X7CM, 7X5CM Blank PCB Circuit Board Prototype Board for Soldering Electronic Project Compatible with Arduino Kits 4 Sizes
Asin: B088GP981V | Model: HJF-057ZF | PartNumber: HJF-057ZF | Ean: 0729920402793 | UPC: 729920402793
â4 Mounting Holes At The Corners Of The Board Are Very Convenient For Installing Them..
âOur Guarantee:Quality Assurance,Efficient Service. We Provide 12-Months Warranty. Please Feel Free To Contact Us If You Have Any Question..
âThe Boards Are All Basic Green Body With Soldered Holes And Good Plating Around The Holes..
âCircuit Board Is Very Strong And Durable, And A Tin Plating Process Makes The Welding Component Easier..
Features
- 11 pieces single-sided PCB prototype boards in 4 different sizes,including 1pcs 3.9"x8.7",2pcs 3.5"x5.9",3pcs 2.8"x3.5",5pcs 2.0"x2.8".
- Circuit board is very strong and durable, and a tin plating process makes the welding component easier.
- 4 mounting holes at the corners of the board are very convenient for installing them.
- The boards are all basic green body with soldered holes and good plating around the holes.
- Our Guarantee:Quality assurance,efficient service. We provide 12-months warranty. Please feel free to contact us if you have any question.
- See more on Amazon...
Brand: YUNGUI | Manufacturer: YUNGUI
Dimensions: 0.06 x 8.66 x 0.39 inches | Weight: 220.00 Grams
See On Amazon #8
AUSTOR 100 Pcs PCB Board Kit Including 30 Pcs PCB Boards 30 Pcs 40 Pin 2.54mm Header Connector(Bonus: 10 Pcs 2P&3P Terminal Blocks and 30 Pcs Caps)
Asin: B07CK3RCKS | Model: AMA-18-581 | PartNumber: AMA-18-581 | Ean: 0651354513717 | UPC: 651354513717
Screw Terminal Block: 5 Pieces 5.08-301-2P And 5 Pieces 5.08-301-3P ; Pitch: 5.08Mm, Rated Voltage: 300V, Rated Current: 16A.
100 Pieces In 1 Kit: All Of The Items Are Put In A Free Plastic Box, Easy To Store And Take Out; They Are Good Components For Pcb.
Jumper Caps: 30 Pieces Standard 2.54Mm Pin Spacing Circuit Board Jumper Cap In 6 Colors, 5 Pieces Per Color.
Header Connector: 10 Pieces 40 Pin Male Header, 10 Pieces 40 Pin Pitch Right Angle Male Headers, 10 Pieces 40 Pin Female Header; Pitch: 2.54Mm, Single Row And Straight Connector.
Features
- PCB Board: 30 pieces double sided PCB prototype boards in 4 different sizes, 10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards
- Header Connector: 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header; pitch: 2.54mm, single row and straight connector
- Screw Terminal Block: 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P ; pitch: 5.08mm, rated voltage: 300V, rated current: 16A
- Jumper caps: 30 pieces standard 2.54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color
- 100 Pieces in 1 kit: all of the items are put in a free plastic box, easy to store and take out; they are good components for PCB
- See more on Amazon...
Brand: AUSTOR | Manufacturer: AUSTOR
See On Amazon #9
3D Printer CNC Controller Ardiuno CNC kit with for ArduinoIDE,Longruner GRBL CNC Shield Board+RAMPS 1.4 Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema17 Stepper Motor LKB02,Black
Asin: B072N4FMRN | Model: LKB02 | PartNumber: LKB02 | Ean: 8414771507439
â
Premium Quality â
Each Part Of This Logrunner 3D Printer Conk Kit Was Made Of Premium Material. These Components Can Be Used In A Wide Range Of Application..
â
Good After-Sales Service. We'll Respond Within 24 Hours For Any Questions..
â
Drv8825 Stepper Motor Driver With Heat Sinks â
High Quality Stepper Motor Drive With 4 Aluminum Cooler, Running Within 2.5A Current (Maximum), Compatible With For Arduinoide Software And Hardware..
â
Professional 3D Printer Cnc Kit â
This Is A Professional 3D Printer Diy Kit With Multiple Types Of Modules Or Components You Need. It Is A Great Assortment Set For Starters And Professionals..
Features
- Latest CNC Shield Expansion Board V3.0 -CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for ArduinoIDE, GRBL 0.9.
- Professional 3D printer CNC Kit This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great assortment set for starters and professionals.
- Premium Quality Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of application.
- DRV8825 Stepper Motor Driver with Heat Sinks High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum), compatible with for ArduinoIDE software and hardware.
- Good after-sales service. We'll respond within 24 hours for any questions.
- See more on Amazon...
Brand: Longruner | Manufacturer: Longruner
Dimensions: 0.04 x 0.04 x 0.04 inches | Weight: 0.84 Pounds
See On Amazon #10
uxcell 5 Pcs USB Female Type-B Jack 4-Pin 90 Degree PCB DIP Socket Connector
Asin: B00MCM0Z3Q | Model: a13081900ux0101 | PartNumber: a13081900ux0101 | Ean: 0700955923149 | UPC: 700955923149
Total Size : 16 X 12 X 11Mm/0.6'' X 0.5'' X 0.4'' (L*W*H);Material : Metal, Electronic Parts.
Package Content : 5 X Usb 2.0 Jack.
Main Color : White, Silver Tone;Weight : 18G.
Mount Pin Distance : 12Mm/0.5";Pin Spacing : 2 X 1.5Mm/0.08" X 0.06"(L*W).
Features
- Product Name : USB 2.0 Jack;Type : USB Type B Female
- Mount Pin Distance : 12mm/0.5;Pin Spacing : 2 x 1.5mm/0.08 x 0.06(L*W)
- Total Size : 16 x 12 x 11mm/0.6'' x 0.5'' x 0.4'' (L*W*H);Material : Metal, Electronic Parts
- Main Color : White, Silver Tone;Weight : 18g
- Package Content : 5 x USB 2.0 Jack
- See more on Amazon...
Brand: uxcell | Manufacturer: Uxcell
Dimensions: 0.79 x 2.76 x 1.97 inches | Weight: 18.00 Grams
See On Amazon #11
BIGTREETECH TFT35 SPI V2.1 Graphic Smart Display Compatible BTT Manta M8P/M4P/M5P, Manta E3EZ Control Board + CB1 Support Running Klipper Firmware DIY Upgrade 3D Printer
Asin: B0BSCQNF28 | Model: KINGPRINTER-1040000035 | PartNumber: KINGPRINTER-1040000035
3. It Is Connected With The Main Board Through Fpc Cable, Which Is Simple And Convenient To Operate;.
5. Currently, It Only Supports Bigtreetech Cb1. If You Use Cb1 V2.2, You Only Need To Use With Tft35 Spi V2.1; If You Use Cb1 V2.1, You Need To Use With Tft35 Spi V2.1+Io2can V1.0. If You Have Any Questions, You Can Contact Us At Any Time, And We Will Answer Your Questions..
4. Designed With Xh2.54 Terminal, Which Can Communicate With The Board Through The Terminal..
2. Each Motor Drive Shall Select Power Supply, Motor Power Supply Or Main Power Supply (Heating Rod Power Supply) Separately;.
Features
- 1. LCD display adopts SPI, touch adopts I2C communication mode, and shares the main control chip with the motherboard, which greatly reduces the cost of touch screen;
- 2. Each motor drive shall select power supply, motor power supply or main power supply (heating rod power supply) separately;
- 3. It is connected with the main board through FPC cable, which is simple and convenient to operate;
- 4. Designed with XH2.54 terminal, which can communicate with the board through the terminal.
- 5. Currently, it only supports BIGTREETECH CB1. If you use CB1 V2.2, you only need to use with TFT35 SPI V2.1; If you use CB1 V2.1, you need to use with TFT35 SPI V2.1+IO2CAN V1.0. If you have any questions, you can contact us at any time, and we will answer your questions.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #12
BIGTREETECH Manta M8P V2.0 Integrated Control Board 32Bit Running Klipper with CB1, High Speed 3D Printer Motherboard, Compatible TMC5160T Plus,TMC5160,TMC2209,TMC2240 Stepper Driver (Without CB1)
Asin: B0CHFJYM5N | Model: KINGPRINTER-1020000442 | PartNumber: KINGPRINTER-1020000442
âThe Control Board And The Core Board Use Btb Connection Method, So That Other Core Board Solutions Other Than Cm4 Can Be Selected, Such As Bigtreetech Cb1. The Mainboard Reserves The Spi Expansion Interface For Using The Klipper Firmware To Connect An External Acceleration Sensor For Acceleration Compensation..
âThe Mcu Firmware Can Be Upgraded Through Sd Card, Or Through Dfu Through Klipper's Make Flash Command; The Main Board Reserves The Proximity Switch Interface, Supports Npn And Pnp Type Selection, (24V, 12V, 5V) Voltage Optional, Shared With Vfan6 Voltage Selection..
âThe Thermistor Can Select The Pull-Up Resistance Value Through The Jumper, Which Supports Pt1000 Without External Modules, Which Is Convenient For Diy Use; The Control Board Reserves A Three-Way Four-Wire Fan Interface, Which Can Be Used To Connect A Water Cooling Device..
âThe Power Chip Of Manta M8p Integrated Main Control Board Adopts Tps5450-5A, Which Supports Dc12/24V Power Input; The Output Current Of This Chip Is Up To 5A, And The Peak Value Can Reach 6A, Which Perfectly Supports The Power Supply Of Raspberry Pi..
Features
- BIGTREETECH Manta M8P V2.0 Control Board uses 32-bit ARM Cortex-M7 series STM32H723ZET6 main control chip with a core frequency of 550MHz. High efficiency MOSFET for less heat generation;
- The power chip of Manta M8P integrated main control board adopts TPS5450-5A, which supports DC12/24V power input; the output current of this chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry Pi.
- The control board and the core board use BTB connection method, so that other core board solutions other than CM4 can be selected, such as BIGTREETECH CB1. The mainboard reserves the SPI expansion interface for using the Klipper firmware to connect an external acceleration sensor for acceleration compensation.
- The thermistor can select the pull-up resistance value through the jumper, which supports PT1000 without external modules, which is convenient for DIY use; the control board reserves a three-way four-wire fan interface, which can be used to connect a water cooling device.
- The MCU firmware can be upgraded through SD card, or through DFU through Klipper's make flash command; the main board reserves the proximity switch interface, supports NPN and PNP type selection, (24V, 12V, 5V) voltage optional, shared with VFAN6 Voltage selection.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #13
BIGTREETECH EZ2209 V1.0 Stepper Motor Driver 5PCS Stepstick Mute EZ2209 Compatible with SKR 3 EZ Manta E3 EZ 3D Printer Controller Main Board
Asin: B0BRZ7QSWJ
đĄăA Breeze To Installă The Pinless Structure Of Ez2209 Stepper Driver Can Protects You From Finger Prick. Moreover, Its Anti-Misplugging Design Ensures You To Insert The Driver In A Correct Direction And Removes You From Dangers Caused By Driver Misplugging. Tip: It Is Necessary To Use Ez Driver Connector If You Want To Use Ez Drivers In Non-Ez Design Motherboard..
đĄăDurableă Ez2209 Stepper Motor Driver Is Made Of 4 Layers Pcb For Superior Performanceand A Longer Service Life. We Offer Long-Term After-Sales Guarantee For 12 Months. If You Have Difficulties In Using Our Step Driver, Please Feel Free To Contact Us, We Are Always Ready For Help..
đĄăUltra Silentă Ez2209 Stepper Motor Driver Adopts Stealthchop2 Mute Technology Which Reduces Motor Noise To The Point Of Silence At Low Velocities To Ensures Noiseless Operation, Maximum Efficiency And Best Motor Torque..
đĄăBetter Heat Dissipationă An Innovative 2 In 1 Combination Of Stepper Driver And New Large Aluminum Heat Sink Enables Ez2209 Stepper Driver Better Heat Dissipation, Declining Energy Consumption To A Minimum As Well As Protecting The Driver Chip From External Damage..
Features
- Wide Application Size: 18.5*19.8 mm, drive current 1.6A, peak current 2A, voltage range12 V- 24 V, 256 subdivision. BTT EZ2209 stepper motor driver can directly use with Mnata E3 EZ and SKR 3 EZ motherboard. EZ2209 can also well-matched with I3 Mega, Octopus V1.2, SKR 3 and other popular main boards by using BTT EZ driver connector.
- Better heat dissipation An innovative 2 in 1 combination of stepper driver and new large aluminum heat sink enables EZ2209 stepper driver better heat dissipation, declining energy consumption to a minimum as well as protecting the driver chip from external damage.
- A Breeze to Install The pinless structure of EZ2209 stepper driver can protects you from finger prick. Moreover, its anti-misplugging design ensures you to insert the driver in a correct direction and removes you from dangers caused by driver misplugging. Tip: it is necessary to use EZ driver connector if you want to use EZ drivers in non-EZ design motherboard.
- Ultra Silent EZ2209 stepper motor driver adopts stealthChop2 Mute technology which reduces motor noise to the point of silence at low velocities to ensures noiseless operation, maximum efficiency and best motor torque.
- Durable EZ2209 stepper motor driver is made of 4 layers PCB for superior performanceand a longer service life. We offer long-term after-sales guarantee for 12 months. If you have difficulties in using our step driver, please feel free to contact us, we are always ready for help.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIQU
See On Amazon #14
Molence 80PCS 8 Vaules PCB Proto Board Kit SMD Turn to DIP Adapter Converter Plate SOP MSOP SSOP TSSOP SOT 8 10 14 16 20 24 28 TQFP 32 44 64 84 100
Asin: B0C6B1MM91
Pin Hole Pitch: 2.54Mm/0.1â; Pin Hole Aperture: 1Mm; Pcb Thickness: 1.6Mm; Pin Pitch: 0.65Mm/1.27Mm (Sop 10: 0.5Mm/0.95Mm)..
Apply To The Commonly Used Ssop, Tssop, Msop And Other Packages Transferred Into Dip. This Allows Engineers And Hobbyists To Use Smd Components On Their Breadboard Or Prototyping Projects Without Having To Manually Solder Wires To Tiny Smd Components..
All Pcb Prototype Boards Are Double-Sided And Made Of High Quality Fr4, Green Oil Tin Spraying..
Model: Sop/Ssop/Tssop 8 10 14 16 20 24 28, Tqfp 32 44 64 84 100..
Features
- A PCB proto board SMD to DIP adapter is a small printed circuit board that allows surface mount device (SMD) components to be used with through-hole technology, which uses dual in-line package (DIP) components.
- Model: SOP/SSOP/TSSOP 8 10 14 16 20 24 28, TQFP 32 44 64 84 100.
- Pin hole pitch: 2.54mm/0.1 ; PIN hole aperture: 1mm; PCB thickness: 1.6mm; pin pitch: 0.65mm/1.27mm (SOP 10: 0.5mm/0.95mm).
- All PCB prototype boards are double-sided and made of high quality FR4, Green oil tin spraying.
- Apply to the commonly used SSOP, TSSOP, MSOP and other packages transferred into DIP. This allows engineers and hobbyists to use SMD components on their breadboard or prototyping projects without having to manually solder wires to tiny SMD components.
- See more on Amazon...
Brand: Molence | Manufacturer: Molence
See On Amazon #15
DEYUE 60 Pcs PCB Board Circuits Boards Kit | 28 Double-Sided Prototyping PCBs Circuit Boards | 20 Female/Male Header Connector Pin | 12 PCB Terminal Blocks and A Happy DIY
Asin: B07FFDCF22 | Model: DY1809 | PartNumber: DY1809 | Ean: 0663585944888 | UPC: 663585944888
Muti-Purpose â
General Purpose Prototyping Circuit Board For Analog And Digital Use; With Pre-Tinned Plated Holes; Extra Accessories To Make Life Easy For You (Screw Terminal Block And Headers).
Package Component â
28 Pcs Of Double Sided Pcb Prototype Board In 5 Different Size With Mounting Holes Or Slots On Each Board Corner; 20 Header Socket (Female And Male); 12 Pcs 2/ 3Pole Mount Screw Terminal.
The Flexibility Of Having Choices â
Great Assortment Of Size And Perfect For Quickly Prototyping Stackable Circuits; Female And Male Header Pin Plus Screw Terminals For Your Ease And Satisfaction.
This Is Not Your Normal Perf Board! â
This Board Is Much Higher Quality With Plated-Through-Holes And Annular Rings That Will Not Lift Off The Pcb Under Normal Soldering Conditions.
Features
- 100 % SATISFACTION GUARANTED Excellent quality; Easy soldering; Double sided board with plated-thru holes allows components to be easily soldered to either side of the board
- THIS IS NOT YOUR NORMAL PERF BOARD! This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions
- MUTI-PURPOSE General purpose prototyping circuit board for analog and digital use; With pre-tinned plated holes; Extra accessories to make life easy for you (Screw Terminal Block and Headers)
- THE FLEXIBILITY OF HAVING CHOICES Great assortment of size and perfect for quickly prototyping stackable circuits; female and male header pin plus screw terminals for your ease and satisfaction
- PACKAGE COMPONENT 28 Pcs of double sided PCB prototype board in 5 different size with mounting holes or slots on each board corner; 20 Header Socket (female and male); 12 pcs 2/ 3Pole Mount Screw Terminal
- See more on Amazon...
Brand: DEYUE | Manufacturer: deyue
See On Amazon #16
BIGTREETECH Octopus V1.1 Control Board 32bit Silent Board Compatible TMC2209, TMC2240, TMC2208, TMC5160 Stepper Driver, Support DIY Klipper and Raspberry-Pi Online Printing for Voron 3D Printer
Asin: B094NPRYDP | Model: KINGPRINTER-ZZB000540 | PartNumber: KINGPRINTER-ZZB000540
ăRealize Online PrintingăInterfaces With A Raspberry Pi Using Emulated Serial Over Usb Or Direct Uart To Any Of The Serial Ports On The Board, To Realize Klipper Firmware And Raspberry Pi Online Printing..
ăIncrease Protection FunctionăUses High-Performance Mosfets To Increase Heating Efficiency While Also Reducing Heat Generation On The Motherboard. Supports âPrint From Sd Cardâ And âPrint Via Usb Otgâ Using The Integrated Usb-A Port..
ăMotherboard Expansion FunctionăSupport Bltouch, Locked-Rotor Detection, Shutdown After Printing, Resume Printing After Power Failure, Can Bus, U Disk Function, Iic Expansion; At The Same Time Reserved Wifi Interface, Pt100 Thermistor Interface (Optional, Only Reserved Interfaces, Customers Need To Purchase Chip Welding, Please Pay Attention.), Dual Z-Axis Printer..
ăStrong Diy SupportăThis Motherboard Supports Up To 8 Stepper Drivers With 9 Stepper Driver Outputs In Total; And Up To 6 Pwm Fans And 2 Always-On Fans With The Ability To Individually Select The Voltage Rail That Will Drive Each Fan. Select From Vin, 12V Or 5V..
Features
- Main Control Chip Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
- Strong DIY Support This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
- Realize Online Printing Interfaces with a Raspberry Pi using emulated serial over USB or direct UART to any of the serial ports on the board, to realize Klipper Firmware and Raspberry Pi Online Printing.
- Motherboard Expansion Function Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional, Only reserved interfaces, customers need to purchase chip welding, please pay attention.), dual Z-axis printer.
- Increase Protection Function Uses high-performance MOSFETs to increase heating efficiency while also reducing heat generation on the motherboard. Supports print from SD card and print via USB OTG using the integrated USB-A port.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #17
WayinTop PCB Board Kit, Double Sided Prototype Boards 6 Sizes 40 Pin 2.54mm Male/Female Header Connector 2/3Pin Screw Terminal Blocks and Resistor 10-1M Ohm 5mm Led Diodes Tactile Cap Switch
Asin: B07QC5X21L | Model: WYTP-PCB | PartNumber: WYTP-PCB | Ean: 0713871270334 | UPC: 713871270334
ăPcb Board & Terminal Blockă19Pcs In Total Double Sided Pcb Prototype Boards Of 6 Different Sizes: 2*8Cm(4Pcs ), 3*7Cm(4Pcs ), 4*6Cm(4Pcs ), 5*7Cm(4Pcs ), 7*9Cm(2Pcs ), 8*12Cm(1Pcs ); Terminal Block: 10Pcs 2 Pin + 5Pcs 3 Pin Screw Terminal Block Connector..
ăLed Diodes & Tactile Cap Switchă50Pcs 5Mm Light Emitting Diodes In 5 Colors (Red, Yellow, White, Blue, Green), 10Pcs Per Color & 12Pcs Tactile Switch With Button Cap..
ăResistoră600Pcs In Total Of 30 Different Types: 10Ω, 22Ω, 47Ω 100Ω, 150Ω, 200Ω, 220Ω, 270Ω, 330Ω, 470Ω, 510Ω, 680Ω, 1KÏ, 2KÏ, 2.2KÏ, 3.3KÏ, 4.7KÏ, 5.1KÏ, 6.8KÏ, 10KÏ, 20KÏ, 47KÏ, 51KÏ, 68KÏ, 100KÏ, 220KÏ, 300KÏ, 470KÏ, 680KÏ, 1MÏ, 20Pcs Each..
ăHeader Connectoră26Pcs In Total Of 4 Different Types: 10Pcs 40 Pin Male Header + 10Pcs 40 Pin Female Header + 3Pcs 40 Pin Pitch Right Angle Male Headers + 3Pcs 2X 40 Pin Strip Dual Male Header.
Features
- The Most Complete Kit This Set contains 6 parts - PCB Board, Header Connector, Resistor, Screw Terminal Block, LED diodes & Tactile Cap Switch, with which is enough for DIY soldering, prototyping, arduino boards and other small projects or engineering projects.
- Header Connector 26pcs in total of 4 different types: 10pcs 40 pin male header + 10pcs 40 pin female header + 3pcs 40 pin pitch right angle male headers + 3pcs 2x 40 pin Strip Dual Male Header
- PCB Board & Terminal Block 19pcs in total double sided PCB prototype boards of 6 different sizes: 2*8cm(4pcs ), 3*7cm(4pcs ), 4*6cm(4pcs ), 5*7cm(4pcs ), 7*9cm(2pcs ), 8*12cm(1pcs ); Terminal Block: 10pcs 2 Pin + 5pcs 3 Pin Screw Terminal Block Connector.
- Resistor 600pcs in total of 30 different types: 10 , 22 , 47 100 , 150 , 200 , 220 , 270 , 330 , 470 , 510 , 680 , 1K , 2K , 2.2K , 3.3K , 4.7K , 5.1K , 6.8K , 10K , 20K , 47K , 51K , 68K , 100K , 220K , 300K , 470K , 680K , 1M , 20pcs each.
- LED diodes & Tactile Cap Switch 50pcs 5mm light emitting diodes in 5 colors (red, yellow, white, blue, green), 10pcs per color & 12pcs tactile switch with button cap.
- See more on Amazon...
Brand: WayinTop | Manufacturer: WayinTop
See On Amazon #18
FYSETC 3D Printer Ender 3 Parts, 3 Pin 27 Adapter Board BL Touc Auto Bed Leveling Sensor or Filament Sensor 3D Touch for Ender 3 / Pro Ender 5 CR-10/ Mini V4.2 Silent Mainboard
Asin: B07PR26KSD
Ensure You Connect Touch's 3 Pins Per The Labeling On The Board. The Board Itself Is Plug And Play, No Soldering Required. You Will Need To Update To A Custom Firmware(Marlin, Klipper, Etc.) To Enable The Auto Bed Leveling Feature. You Should Upgrade Regardless For Thermal Runaway Protection As It's Off By Default On The Ender 3..
What You Get? 1X 3 Pin 27 Adapter Board.
If You Need More Other Information, Please Reference The Thingiverse (Search Keywords: Ender 3 Auto Bed Leveling Sensor) And Youtube Video(Keywords:Ender 3 Touch With Sd Card)..
How To Installtion: With This Adapter, No Wires Need To Be Cut!! Simply Connect This Between Your Board And Your Cable, Attach The 3D Touch Transfer Wires And Upgrade Your Firmware..
Features
- 2019 Ender 3 Upgrade parts,compatibility with Ender 3, CR-10, CR-10 Mini, but not work with the Ender 2, the ender 2 uses pin 29.
- How to installtion: With this adapter, no wires need to be cut!! Simply connect this between your board and your cable, attach the 3d touch transfer wires and upgrade your firmware.
- Ensure you connect Touch's 3 pins per the labeling on the board. The board itself is plug and play, no soldering required. You will need to update to a custom firmware(Marlin, Klipper, etc.) To enable the auto bed leveling feature. You should upgrade regardless for thermal runaway protection as it's off by default on the ender 3.
- If you need more other information, please reference the thingiverse (search keywords: ender 3 auto bed leveling sensor) and youtube video(keywords:ender 3 touch with sd card).
- What you get? 1x 3 Pin 27 Adapter Board
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #19
BIGTREETECH Upgrade Ender 3 Motherboard Silent Control Board SKR Mini E3 V2.0 32Bit with TMC2209 UART Stepper Driver 3D Printer Parts for Creality Ender3
Asin: B08SMFHSPV | Model: KINGPRINT-ZZB000514 | PartNumber: KINGPRINT-ZZB000514
đ»ăHot-Bed MosfetăThe Hot Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Larger Heat Dissipation Area, And Reduce Heat Generation..
đ»ăAfter-Sales SupportăIf You Encounter Any Problems, Please Write Us Via Amazon As Soon As Possible. We Have Professional Technical After-Sales Personnel To Solve Your Problems;.
đ»ăUpgrade FeaturesăSupport Bltouch, Filament Detection, Power-Off Resume, Automatic Shutdown, Etc .; Increase The Distance Between The Driving Chip And The Components To Avoid The Trouble Caused By The Heat Sink;.
đ»ăCnc FanăBecause The Fan On The Skr Mini E3 V2.0 Control Board Is A Cnc Fan, You Need To Set The Wind Speed Before Using It. (Note: V2.0 Version Of The Fan Is Not Ready To Use After Power On)..
Features
- Main Control Chip Features This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K.
- CNC Fan Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on).
- Hot-bed Mosfet The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation.
- Upgrade Features Support BLtouch, filament detection, power-off resume, automatic shutdown, etc .; Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink;
- After-sales Support If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems;
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #20
Custom Circuit Solutions SMD to DIP Breakout PCB Module, 8-Pin, SOIC to DIP Adapter Header with Integrated SMT Resistor and/or Capacitor Pads 10 Pieces
Asin: B09Q2CF9MW | Ean: 0195893705351 | UPC: 195893705351
Oversized Solder Pads Simplify Hand Soldering. Can Be Easily Soldered Without Special Equipment In As Little As A Few Seconds. See Our Website For Easy Soldering Tips..
0603/0805 Footprint Pads Between Each Pin And The Local Common Plane (Or Pin To Pin) Allow For Integrated Onboard Smt Res/Cap Connections, Greatly Reducing The Number Of Wired Connections..
Warning:This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go To Www.P65warnings.Ca.Gov..
Integrated Local Common/Ground Plane Allows The Use Of Soic-8 Devices With Thermal Solder Pads On The Bottom. This Smt Adapter Can Be Used For High Power Converters With Higher Operating Temps..
Dual Rows Of Solder Pin Holes Provides Much More Flexibility In Soldering And Mounting Your Circuit. Jumper Wires Can Also Be Soldered Between Holes, Reducing Number Of Breadboard Connections..
Features
- Modular Component Breakout Boards such as these include both an SMD adapter (SOIC-8) and passive component pads in a single reusable SMD breakout board.
- Dual Rows of Solder Pin Holes provides much more flexibility in soldering and mounting your circuit. Jumper wires can also be soldered between holes, reducing number of breadboard connections.
- Oversized Solder Pads simplify hand soldering. Can be easily soldered without special equipment in as little as a few seconds. See our website for easy soldering tips.
- Integrated Local Common/Ground Plane allows the use of SOIC-8 devices with thermal solder pads on the bottom. This SMT adapter can be used for high power converters with higher operating temps.
- 0603/0805 Footprint Pads between each pin and the local common plane (or pin to pin) allow for integrated onboard SMT res/cap connections, greatly reducing the number of wired connections.
- WARNING:This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- See more on Amazon...
Brand: Custom Circuit Solutions | Manufacturer: Custom Circuit Solutions LLC
Weight: 0.03 Pounds
See On Amazon ï»ż
Looking For Something Else?
Search