Uenede 2PCS Brass 5/8 Inch Barb Ball Valve Heater Water Control Valve 2-way Shut-off Valve with 90 Operation Handle Hose Barb Fitting for Water/Oil/Gas Include 4 Stainless Steel Clamps
Asin: B0CQJ4LXC7 | Model: 0ZM-IDS-01335 | PartNumber: 0ZM-IDS-01335
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Heavy & Thick】Heavy Brass Valve And Thickened Wall, Higher Strength And Very Rugged..
【Solid Connection】The Hose Barb Ball Valve Can Be Solid Connected To The Hose (Fit Hose Which Id Of 16Mm). Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps. Tighten Clamps As Tightly As Possible To Prevent Leakage..
【90° Operation Handle】Plastic-Covered Lever Handle For On/Off Manual Control. Widely Used In Pneumatic System, Such As Propane Gas Air Hose, Fuel Line. It's Also Popular In Garden Draining..
【Solid Brass】The Shut-Off Valves Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 2PCS 5/8"OD Barb Ball Valve.
- Solid Brass The shut-off valves are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Heavy & Thick Heavy brass valve and thickened wall, higher strength and very rugged.
- 90 Operation Handle Plastic-covered lever handle for on/off manual control. Widely used in pneumatic system, such as propane gas air hose, fuel line. It's also popular in garden draining.
- Solid Connection The hose barb ball valve can be solid connected to the hose (Fit hose which ID of 16mm). Keep the water pipe incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
Dimensions: 1.00 x 2.00 x 0.50 inches
See On Amazon Similar To Uenede 2PCS Brass 5 8
#1
Uenede 2PCS Solid Brass 90 Elbow Barb Bulkhead Fitting 5/8 OD Barb Bulkhead Coupling Tank Connector Hose Pipe Barb Fitting for Water/Oil/Gas
Asin: B0BP6QXPLW | Model: 0ZM-IDS-01221 | PartNumber: 0ZM-IDS-01221
【Easy To Use】First You Need To Drill A Hole Of Appropriate Size For Installation. Then Pass The Fitting Through The Bulkhead, Pad The Washers, Tighten The Nut. Finally Connect The Pipe With Appropriate Size At The End. No Doubt, It Is Easy To Operate..
【Solid Connection】The Hose Barb Fittings Can Be Solid Connected To The Hose (Fit Hose Which Id Of 16Mm). Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps (Not Include). Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Widely Used】The Bulkhead Fittings Can Be Applied In Water Towers, Water Inlet And Outlet, And Self-Made Water Storage Barrels. Suitable For Temperature Control Circuits,Pneumatic Circuits,Vacuum And Fluid Systems Test Apparatus,Lubricant,Coolant Lines, Etc..
【Solid Brass】The Metal Parts Of Barb Bulkhead Fittings Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. Heavy 90°Elbow Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
Features
- Package Include 2PCS Brass 5/8"OD Barb 90 Elbow Hose Bulkhead Fittings.
- Solid Brass The metal parts of barb bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. Heavy 90 elbow shaped brass barbs and thickened wall, higher strength and very rugged.
- Easy to Use First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the pipe with appropriate size at the end. No doubt, it is easy to operate.
- Widely Used The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
- Solid Connection The hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm). Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
Dimensions: 2.00 x 0.00 x 0.50 inches
See On Amazon #2
Uenede 2PCS Solid Brass 5/8"OD Barb Tee Splicer Mender Hose Barb Fitting 3-Way Union Intersection for Water/Oil/Gas
Asin: B09GV6PQ4L | Model: 0ZM-IDS-00170 | PartNumber: 0ZM-IDS-00170
【Heavy & Thick】Heavy Tee Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
【Note】Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps (Not Include). Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Solid Connection】The Tee Shaped Hose Barb Fittings Can Be Solid Connected To The Hose (Fit Hose Which Id Of 16Mm)..
【Package Include】2Pcs 5/8"X5/8"X5/8" Brass Tee Hose Barb Fittings..
Features
- Solid Brass The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Package Include 2PCS 5/8x5/8x5/8 Brass Tee Hose Barb Fittings.
- Heavy & Thick Heavy Tee shaped brass barbs and thickened wall, higher strength and very rugged.
- Solid Connection The Tee shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm).
- Note Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #3
Uenede 2PCS 1/8" NPT Female Thread 1-1/4" Length Extended Brass Bulkhead Coupler 5/8" Outer Diameter Water Tank Connector Thru-bulk Coupling Pipe Fitting
Asin: B0D25TM7TL | Model: 0ZM-IDS-03790 | PartNumber: 0ZM-IDS-03790
【High Quality Thread】The Bulkhead Fittings Are 3/8" Male And 1/8" Npt Female Thread, Which Are Applicable Models Fitting For Most Items. Please Check The Size Before Ordering..
【Easy To Use】First You Need To Drill A Hole Of Appropriate Size For Installation. Then Pass The Fitting Through The Bulkhead, Pad The Washers, Tighten The Nut. Finally Connect The Water Pipe With Appropriate Size At The End. No Doubt, It Is Easy To Operate..
【Widely Used】The Bulkhead Fittings Can Be Applied In Water Towers, Water Inlet And Outlet, And Self-Made Water Storage Barrels, Suitable For Various Pipes, Faucets, Hoses, Fittings, Multiple Uses To Provide Convenience For Your Life..
【Two Types Of Washers】We Offer Two Types Of Washers: Rubber Washers & Serrated Washers. The Use Scenarios Of The Two Gaskets Are Different, Which Can Meet Your Different Needs. Notice: Two Kinds Of Washers Cannot Be Used Together!.
【Solid Brass】The Metal Parts Of Bulkhead Fittings Are All Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Extended Length The length of the threaded is about 32mm, can be met more installation requirements.
- Solid Brass The metal parts of bulkhead fittings are all made of solid brass, which is strong and not easily corroded, suitable for long time use.
- High Quality Thread The bulkhead fittings are 3/8 male and 1/8 NPT female thread, which are applicable models fitting for most items. Please check the size before ordering.
- Two Types of Washers We offer two types of washers: Rubber washers & Serrated washers. The use scenarios of the two gaskets are different, which can meet your different needs. Notice: two kinds of washers CANNOT be used together!
- Easy to Use First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the water pipe with appropriate size at the end. No doubt, it is easy to operate.
- Widely Used The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels, suitable for various pipes, faucets, hoses, fittings, multiple uses to provide convenience for your life.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
Dimensions: 1.00 x 2.00 x 0.50 inches
See On Amazon #4
Uenede 2PCS Brass 1/2" to 5/8" OD Barb Reducer Barbed Hose Fittings with 4 Stainless Steel Clamps Hex Reducing Splicer Mender Fitting for Water/Oil/Gas
Asin: B09JNN5197 | Model: 0ZM-IDS-00315 | PartNumber: 0ZM-IDS-00315
【Heavy & Thick】Heavy 2-Way Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
【Note】Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps. Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Solid Connection】The 2-Way Shaped Hose Barb Fittings Can Be Solid Connected To The Hose (Fit Hose Which Id Of 13Mm To 16Mm)..
【Package Include】2Pcs 1/2"Barb X 5/8"Barb 2-Way Reducer Hose Barb Fittings; 4Pcs Stainless Steel Clamps..
Features
- Solid Brass The reducer hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. The stainless steel clamps can avoid garden hose leakage which is rustproof, corrosion resistance and durable.
- Package Include 2PCS 1/2Barb x 5/8Barb 2-Way Reducer Hose Barb Fittings; 4PCS stainless steel clamps.
- Heavy & Thick Heavy 2-Way shaped brass barbs and thickened wall, higher strength and very rugged.
- Solid Connection The 2-Way shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 13mm to 16mm).
- Note Keep the water pipe incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #5
Uenede 2PCS Solid Brass Thread Barb Hex Fittings M18*1.5 Female x 3/8" Barb Include 2 Stainless Steel Clamps
Asin: B0BV1MDDWK | Model: 0ZM-IDS-01015 | PartNumber: 0ZM-IDS-01015
【Heavy & Thick】Heavy 2-Way Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
【Note】Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps. Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Solid Connection】The 2-Way Shaped Thread Hose Barb Fittings Can Be Solid Connected To The Pipe. Suitable For Temperature Control Circuits,Pneumatic Circuits,Vacuum And Fluid Systems Test Apparatus,Lubricant,Coolant Lines, Etc..
【Package Include】2Pcs M18*1.5 Female X 3/8" Barb 2-Way Thread Hose Barb Fittings; 2Pcs Stainless Steel Clamps..
Features
- Solid Brass The thread hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. The stainless steel clamps can avoid garden hose leakage which is rustproof, corrosion resistance and durable.
- Package Include 2PCS M18*1.5 Female x 3/8 Barb 2-Way Thread Hose Barb Fittings; 2PCS stainless steel clamps.
- Heavy & Thick Heavy 2-Way shaped brass barbs and thickened wall, higher strength and very rugged.
- Solid Connection The 2-Way shaped thread hose barb fittings can be solid connected to the pipe. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
- Note Keep the water pipe incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
Dimensions: 2.00 x 1.00 x 0.50 inches
See On Amazon #6
Uenede 2PCS Brass Tire Inflator Nozzle 5/16" Barb Open Flow Lock on Air Chuck Air Compressor Hose End Repair Include 2 Stainless Steel Clamps
Asin: B09LQRV9RM | Model: 0ZM-IDS-01440 | PartNumber: 0ZM-IDS-01440
【Great Tool】The Air Chuck Make It Easier Locking Onto Stem Valves, No Air Leakage Ever Since. When Use The Air Chuck To Inflate A Tire, Please Use The Lock-On Clip To Secure The Chuck To The Valve Stem For Sealing. The Air Chuck Make It Easier Locking Onto Stem Valves, No Air Leakage Ever Since..
【Solid Connection】There's No Need To Thread The Chuck To Valve Stems, Because A Locking Clip Securely Seals The Air Chuck Into Place On A Valve Stem. A Straight Tip Makes Inflation Hassle Free. The Hose Barb Fittings Can Be Solid Connected To The Hose (Fit Hose Which Id Of 8Mm). Keep The Pipe Incision Flat. It Is Better To Use With Clamps. Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Widely Used】Compatible With Most Tire Inflator, Wheel Pressure Gauge And Compressor. Straight Chuck Tip Is Suitable For All Vehicles. The Brass Chuck Design Inflates Tires Easily, Even On Heavy-Duty Work Vehicles Thanks To A 250Psi Maximum Pressure Rating..
【Solid Brass】The Body Of This Nozzle Is Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. The Stainless Steel Clamps Can Avoid Hose Leakage Which Is Rustproof, Corrosion Resistance And Durable..
Features
- Package Include 2PCS 5/16"OD Barb Tire Inflator Nozzle; 2 Stainless Steel Clamps.
- Solid Brass The body of this nozzle is made of solid brass, which is strong and not easily corroded, suitable for long time use. The stainless steel clamps can avoid hose leakage which is rustproof, corrosion resistance and durable.
- Great Tool The air chuck make it easier locking onto stem valves, no air leakage ever since. When use the air chuck to inflate a tire, please use the lock-on clip to secure the chuck to the valve stem for sealing. The air chuck make it easier locking onto stem valves, no air leakage ever since.
- Widely Used Compatible with most tire inflator, wheel pressure gauge and compressor. Straight chuck tip is suitable for all vehicles. The brass chuck design inflates tires easily, even on heavy-duty work vehicles thanks to a 250PSI maximum pressure rating.
- Solid Connection There's no need to thread the chuck to valve stems, because a locking clip securely seals the air chuck into place on a valve stem. A straight tip makes inflation hassle free. The hose barb fittings can be solid connected to the hose (Fit hose which ID of 8mm). Keep the pipe incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #7
Uenede 2PCS Brass Straight Barb Bulkhead Fitting 5/8"OD Barb Thru-Bulk Coupling Tank Connector Hose Pipe Barb Fittings for Water/Oil/Gas
Asin: B0BL2R5GH1 | Model: 0ZM-IDS-02280 | PartNumber: 0ZM-IDS-02280
【Easy To Use】First You Need To Drill A Hole Of Appropriate Size For Installation. Then Pass The Fitting Through The Bulkhead, Pad The Washers, Tighten The Nut. Finally Connect The Hose With Appropriate Size At The End. No Doubt, It Is Easy To Operate..
【Solid Connection】The Hose Barb Fittings Can Be Solid Connected To The Hose (Fit Hose Which Id Of 16Mm). Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps (Not Include). Tighten Clamps As Tightly As Possible To Prevent Leakage..
【Widely Used】The Bulkhead Fittings Can Be Applied In Water Towers, Water Inlet And Outlet, And Self-Made Water Storage Barrels. Suitable For Temperature Control Circuits,Pneumatic Circuits,Vacuum And Fluid Systems Test Apparatus,Lubricant,Coolant Lines, Etc..
【Solid Brass】The Metal Parts Of Barb Bulkhead Fittings Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use. Heavy Straight Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged..
Features
- Package Include 2PCS Brass 5/8"OD Barb Hose Bulkhead Fittings.
- Solid Brass The metal parts of barb bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. Heavy straight shaped brass barbs and thickened wall, higher strength and very rugged.
- Easy to Use First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the hose with appropriate size at the end. No doubt, it is easy to operate.
- Widely Used The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
- Solid Connection The hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm). Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #8
Uenede 2PCS Solid Brass 5/16"OD Barb Ball Valve 2-way Shut-off Valve with 90 Operation Handle Hose Barb Fitting for Water/Oil/Gas
Asin: B09LQHP257 | Model: 1ZM-IDS-01300 | PartNumber: 1ZM-IDS-01300
【Heavy & Thick】Heavy Brass Valve And Thickened Wall, Higher Strength And Very Rugged..
【Solid Connection】The Hose Barb Ball Valve Can Be Solid Connected To The Hose (Fit Hose Which Id Of 8Mm). Keep The Water Pipe Incision Flat. It Is Better To Use With Clamps. Tighten Clamps As Tightly As Possible To Prevent Leakage..
【90° Operation Handle】Plastic-Covered Lever Handle For On/Off Manual Control. Widely Used In Pneumatic System, Such As Propane Gas Air Hose, Fuel Line. It's Also Popular In Garden Draining..
【Solid Brass】The Shut-Off Valves Are Made Of Solid Brass, Which Is Strong And Not Easily Corroded, Suitable For Long Time Use..
Features
- Package Include 2PCS 5/16"OD Barb Ball Valve.
- Solid Brass The shut-off valves are made of solid brass, which is strong and not easily corroded, suitable for long time use.
- Heavy & Thick Heavy brass valve and thickened wall, higher strength and very rugged.
- 90 Operation Handle Plastic-covered lever handle for on/off manual control. Widely used in pneumatic system, such as propane gas air hose, fuel line. It's also popular in garden draining.
- Solid Connection The hose barb ball valve can be solid connected to the hose (Fit hose which ID of 8mm). Keep the water pipe incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon #9
Uenede 2PCS Solid Brass 3/4" Barb x 3/4"GHT Female Garden Hose End Connector Splicer Mender Repair Fitting Include 2 Stainless Steel Clamps
Asin: B09GTZKKHS | Model: 0ZM-IDS-00120 | PartNumber: 0ZM-IDS-00120
【Standard Size】Standard 3/4"Ght Thread Suitable For Most Water Pipe Connections. The Hose Can Be Easily Inserted And The Stainless Steel Clamps Are Tightened Without Water Leakage..
【Note】Keep The Water Pipe Incision Flat. Tighten Stainless Steel Clamps As Tightly As Possible To Prevent Leakage..
【Easy To Use】Knurling Design Can Increase The Friction During Installation And Make Your Installation More Convenient. Easy To Connect And Disconnect, Repair Connector Can Be Use To Repair And Connect The Water Hose End. It Can Be Work With Your Garden Hose, Sprayers, Nozzle, Etc..
【Product Contains】2Pcs 3/4"Ght Female X 3/4" Barb Brass Garden Hose Connector; 2Pcs Stainless Steel Clamps..
Features
- Solid Brass The garden hose connector are made of solid brass, which is strong and not easily corroded, suitable for long time use. The stainless steel clamps can avoid garden hose leakage which is rustproof, corrosion resistance and durable.
- Product Contains 2PCS 3/4GHT Female x 3/4 Barb brass garden hose connector; 2PCS stainless steel clamps.
- Standard Size Standard 3/4GHT thread suitable for most water pipe connections. The hose can be easily inserted and the stainless steel clamps are tightened without water leakage.
- Easy to Use Knurling design can increase the friction during installation and make your installation more convenient. Easy to connect and disconnect, repair connector can be use to repair and connect the water hose end. It can be work with your garden hose, sprayers, nozzle, etc.
- Note Keep the water pipe incision flat. Tighten stainless steel clamps as tightly as possible to prevent leakage.
- See more on Amazon...
Brand: Uenede | Manufacturer: Uenede
See On Amazon
Looking For Something Else?
Search