BETAFPV 4pcs BT2.0 450mAh 1S Battery 3.8V 30C Lipo Battery with BT2.0 Connector Compatible for 1S FPV Tiny Whoop Drone Quadcopter Like Meteor75, Cetus Pro FPV Kit, Cetus X FPV Kit
Asin: B0CQR1MCRZ | Model: BT2.0 450mAh 1S Battery | PartNumber: BT2.0 450mAh 1S Battery
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Efficiency: Bt2.0 450Mah 1S 30C Battery Has Stable Current/Voltage Output And High Efficiency..
Note: Please Do Not Charge A Cell With Physical Damage Or In Puffed. Don't Over-Charge, Or Over-Discharge Batteries. Don't Put It Beside The High-Temperature Condition Or A Humid Environment..
Discharge: The Discharge Of The 450Mah 1S Bt2.0 Lipo Becomes More Efficient By Solving The Problem Of Voltage Sag. Pilots Can Enjoy More Flight Time Without Disturbance Of Low Voltage Warning..
Bt2.0 Connector: Bt2.0 450Mah 1S Battery Comes With Bt2.0 Connector Whichi Is More Durable And It Can Discharge More Currents In The Same Capacity, Providing More Power..
Features
- Compatible: BT2.0 450mAh 1S Battery is suitable for most 1s brushless drones on the market. It can provide stable and consistent power, which achieved dynamic balance and longer flight time. Just need to simply modify the PH2.0 connector to the BT2.0 connector.
- BT2.0 Connector: BT2.0 450mAh 1S Battery comes with BT2.0 connector whichi is more durable and it can discharge more currents in the same capacity, providing more power.
- Efficiency: BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency.
- Discharge: The discharge of the 450mAh 1S BT2.0 lipo becomes more efficient by solving the problem of voltage sag. Pilots can enjoy more flight time without disturbance of low voltage warning.
- Note: Please do not charge a cell with physical damage or in puffed. Don't over-charge, or over-discharge batteries. Don't put it beside the high-temperature condition or a humid environment.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.31 x 2.68 x 0.79 inches | Weight: 0.03 Pounds
See On Amazon Similar To BETAFPV 4pcs BT2.0 450mAh 1S
#1
BETAFPV 4pcs Lava 550mAh 1S 3.8V LiHV 75C FPV LiPo Battery with BT2.0 Connector for 1-2S FPV Tiny Whoop Drone Quadcopters Like Meteor75, Meteor75 Pro, Cetus Pro 1S Brushless Drones, Cetus X 2S Quad
Asin: B0CPDK7QD8
ăPerformanceăWith An Extended Battery Cycle Life, It Ensures Prolonged Power Support, Bringing Users Sustained And Reliable Performance..
ăSuitableă Lava 1S 550Mah Lipo Battery Is Suitable For 1-2S Fpv Tiny Whoop Drone Like Cetus Pro, Cetus X, Meteor75, Meteor75 Pro And Other 1-2S Fpv Racing Drone..
ăDesignăLava 1S 550Mah Lipo Battery Comes With Bt2.0 Connector And Features A New Design That Symbolizes Explosive Power Akin To Molten Lava..
ăHigh C-RateăWith A Boosted Discharge Rate Of 75C, It Provides Greater Burst Power For Superior Flight Performance And Maneuverability For Unparalleled Control..
Features
- Z-Folding Process LAVA series batteries feature a Z-Folding Process, which enables efficient high-current discharge within shorter time frames, resulting in elevated discharge platforms. Compared to the Winding Process, it achieves a 0.2V higher discharge platform under equivalent loads and boasts a 5% higher energy density within the same volume, extending flight time and reducing battery replacement inconvenience.
- High C-Rate With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
- Performance With an extended battery cycle life, it ensures prolonged power support, bringing users sustained and reliable performance.
- Design LAVA 1S 550mAh Lipo Battery comes with BT2.0 connector and features a new design that symbolizes explosive power akin to molten lava.
- Suitable LAVA 1S 550mAh Lipo Battery is suitable for 1-2S FPV Tiny Whoop drone like Cetus Pro, Cetus X, Meteor75, Meteor75 Pro and other 1-2S FPV racing drone.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.28 x 2.36 x 0.63 Inches
See On Amazon #2
BETAFPV 1S LiPo Battery Charger Board 6 Ports Type-C Portable Charger 4.35V 1A 1S LiHV Charger for 1S RC Drone Quadcopter Lipo Battery with BT2.0/PH2.0 Connector Like 300mAh 1S Lipo Battery
Asin: B09BR387VC | Model: 01120002_3 | PartNumber: 01120002_3
đă30W InputăIt Supports A Maximum Input Of 30W. 6-Port Simultaneous Charging Can Be Achieved, And A Single-Port Charging Current Can Reach 1A If You Use 30W Adapter. Perfectly Fulfil The Requirement For Fast Charging Of Multiple Batteries..
đăMore ApplicationsăThe Charger Board Designed With Built-In Type-C Port, Which Is Compact And Portable. It Is Convenient To Use Type-C Cable To Charge Through Pc, Power Bank, Etc.
đăCharging ProtocolsăThis 1S Lipo Battery Charger Board Supports Pd3.0, Qc3.0, Bc1.2, Etc. Fast Charging Protocols. You Can Get 6Pcs Bt2.0 300Mah 1S Battery Of A Full Charge In 25Mins If You Are Using 30W Fast Charging Adapter..
đăDesigned&Led LightsăThis Portable Charger Board Is Designed And Manufactured By Betafpv. Led Lights Indicate When Charging Status Of Each Battery. Greenlight Indicates Charging, Light Off When Fully Charged..
Features
- 2 Types Battery Ports BETAFPV 6 ports 1S charger is designed for charging 1S lipo battery with BT2.0 connector and PH2.0 connector. But please DO NOT charge 2 batteries in one port at the same time. Otherwise, the battery life will be reduced or the battery will be damaged.
- Designed&LED Lights This portable charger board is designed and manufactured by BETAFPV. LED lights indicate when charging status of each battery. Greenlight indicates charging, light off when fully charged.
- 30W Input It supports a maximum input of 30W. 6-port simultaneous charging can be achieved, and a single-port charging current can reach 1A if you use 30W adapter. Perfectly fulfil the requirement for fast charging of multiple batteries.
- Charging Protocols This 1S lipo battery charger board supports PD3.0, QC3.0, BC1.2, etc. fast charging protocols. You can get 6pcs BT2.0 300mAh 1S battery of a full charge in 25mins if you are using 30W fast charging adapter.
- More Applications The charger board designed with built-in type-c port, which is compact and portable. It is convenient to use type-c cable to charge through PC, power bank, etc
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.75 x 3.11 x 1.81 inches | Weight: 0.10 pounds
See On Amazon #3
BETAFPV Serial ELRS F4 1S 5A AIO Brushless Flight Controller with 8MB BlackBox Support Flash via WIFI Betaflight Serial Passthrough with BT2.0 Cable Connector for 65/75mm 1S FPV Whoop Drones
Asin: B0BKPTCMKR
ă8Mb BlackboxăBuilt-In An 8Mb Flash Memory Chip Dedicated To Blackbox Logging. ItâS An Extremely Powerful Tool For Tuning And Troubleshooting An Fpv Drone..
ăTechnical Support & WarrantyăBetafpv Has A Professional Team And Considerate After-Sales Service. If You Have Any Issues With Its Technical Or Quality, Betafpv Guarantees To Serve You!.
ăCross ShapeăF4 1S 5A Aio Fc Adopts The Classic Cross Shape Design With Only 3.6G Ultralight Weight, Reasonable Layout, And Easy To Build. With A 26*26Mm Mounting Hole Size, It Is Fully Compatible With The Whoop Frame In The Current Market. Especially Suitable For The Weight Sensitive 65/75Mm Wheelbase Micro Whoop Drones..
ăGyro&Esc HardwareăWe Updated The Fc With High-Quality Bmi270 Gyro And Bb51 Esc Hardware. If You Want To Setup The Esc Specification, Please Use The Blhelisuite16714902a_Beta Or Esc-Configurator..
Features
- Serial ELRS Compared to the previous version, this new board uses Serial ExpressLRS 2.4G instead of SPI ELRS 2.4G so that it can support ExpressLRS V3.0. Pilots can flash any version of ELRS RX firmware via Wi-Fi or Betaflight serial passthrough.
- Gyro&ESC Hardware We updated the FC with high-quality BMI270 gyro and BB51 ESC hardware. If you want to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator.
- 8MB BlackBox Built-in an 8MB flash memory chip dedicated to Blackbox logging. It s an extremely powerful tool for tuning and troubleshooting an FPV drone.
- Cross Shape F4 1S 5A AIO FC adopts the classic cross shape design with only 3.6g ultralight weight, reasonable layout, and easy to build. With a 26*26mm mounting hole size, it is fully compatible with the whoop frame in the current market. Especially suitable for the weight sensitive 65/75mm wheelbase micro whoop drones.
- Technical Support & Warranty BETAFPV has a professional team and considerate after-sales service. If you have any issues with its technical or quality, BETAFPV guarantees to serve you!
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.79 x 2.17 x 2.17 inches
See On Amazon #4
BETAFPV 8pcs BT2.0 300mAh 1S Battery 3.8V 30C/60C FPV Lipo with 1.0mm Banana Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Cetus FPV Kit Meteor65 Micro Whoop Drone
Asin: B081C8LJHT | Model: BT2.0 300mAh 1 | PartNumber: BT2.0 300mAh 1
đă1.0Mm Banana Connectoră1.0Mm Banana Connector Is More Durable In Terms Of Fit And Conductivity Than Crimped Pin. Highly Recommend To Use Our Newest Bt2.0 Connector To Get The Best Performance From This Bt2.0 300Mah 1S Battery.
đăExtra Adapter CableăPilots Can Charge Bt2.0 Battery By Ph2.0 Charger With Bt2.0-Ph2.0 Adapter Cable(Not Included), No Need To Buy Additional Bt2.0 Charger. But We Also Have Bt2.0 Battery Tester & Charger For Your Need.
đăFlight TimeăDischarge Curve Is Higher Than Ph2.0 Battery Which Means It Can Discharge More Current In The Same Capacity And Provide More Power. You Can Get 2Mins Flight Time In Full Throttle On Meteor65.
đăDischarge RateăThe Discharge Of The Bt2.0 300Mah 1S Lipo Is Improved A Lot That The Voltage Drops More Slowly, So Pilots Can Enjoy More Flight Time Without Disturb Of Low Voltage Warning By Solving The Problem Of Voltage Sag.
Features
- 9A Continuous current BETAFPV exclusive designed BT2.0 Connector AKA 1.0mm Banana connector which can support 9A continuous current and 15A burst while the PH2.0 connector is just support 4.5A continuous current. With this 300mAh 1S BT2.0 battery, all 1S brushless drone will gain powerful and perform perfectly
- Discharge Rate The discharge of the BT2.0 300mAh 1S lipo is improved a lot that the voltage drops more slowly, so pilots can enjoy more flight time without disturb of low voltage warning by solving the problem of voltage sag
- 1.0mm Banana Connector 1.0mm Banana Connector is more durable in terms of fit and conductivity than crimped pin. Highly recommend to use our newest BT2.0 connector to get the best performance from this BT2.0 300mAh 1s battery
- Flight Time Discharge curve is higher than PH2.0 battery which means it can discharge more current in the same capacity and provide more power. You can get 2mins flight time in full throttle on Meteor65
- Extra Adapter Cable Pilots can charge BT2.0 battery by PH2.0 charger with BT2.0-PH2.0 adapter cable(NOT INCLUDED), no need to buy additional BT2.0 charger. But we also have BT2.0 Battery Tester & charger for your need
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 2.00 x 4.00 x 2.00 inches | Weight: 0.02 Pounds
See On Amazon #5
BETAFPV ELRS LiteRadio 3 Radio Transmitter RC Controller, Support FPV Simulator, Joystick Calibration, USB Charging, Compatible for RC Models Like Multirotor Airplane FPV Drone Quadcopter - Mode 2
Asin: B09PV8C3D3 | Model: LiteRadio 3 | PartNumber: LiteRadio 3
đăBetafpv Configurator SupportedăLiteradio 3 Upgrades With Betafpv Self-Developed Customized Literadio System. Pilots Can Directly Operate The Joystick Calibration And Firmware Update On The Radio Transmitter Or Betafpv Configurator. Betafpv Configurator Is A Utility Designed To Simplify Updating, Configuring, And Tuning The Radio Transmitter. Easy And Convenient, Further Fulfilled Your Different Fly Requirement..
đăPlease NoteăThe Default Firmware Of The Literadio 3 Radio Transmitter (Elrs 2.4G) Has Been Elrs V3 Since Jan 2024 Instead Of The Previous Version Elrs V2.0. Literadio 3 Radio Transmitter Elrs V3 No Longer Supports An External Tx Module ! ! !.
đăFpv Simulator SupportedăLiteradio 3 Is Ergonomic And Has The Shape Of A Gaming Controller. The Rubber Coat Is Comfortable To Hold, And The Anti-Slip Texture On The Handles Allows For A Solid Grip. It Has The Function Of An Fpv Simulator Which Can Act As A Usb Joystick When Connected To A Pc, And Supports Most Of The Simulators On The Market With A Comprehensive Configuration..
đăLong Use TimeăEquipped With A Built-In 2000 Mah 1S Battery And Charging Module, You Can Charge By Usb And It Can Work Up To 15 Hours Without An External Module. Meanwhile, It Designed A Low-Power Warning To Indicate A Low Battery. It Indicates A Low Battery And Needs To Be Re-Charged If The Blue Light Flashes Slowly And The Buzzer Beeps Continuously..
Features
- Nano Joystick Gimbal LiteRadio 3 has a newly designed Joystick Gimbal. With ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it has long longevity of up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight.
- Long Use Time Equipped with a built-in 2000 mAh 1S battery and charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designed a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously.
- BETAFPV Configurator Supported LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter or BETAFPV Configurator. BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter. Easy and convenient, further fulfilled your different fly requirement.
- FPV Simulator Supported LiteRadio 3 is ergonomic and has the shape of a gaming controller. The rubber coat is comfortable to hold, and the anti-slip texture on the handles allows for a solid grip. It has the function of an FPV simulator which can act as a USB Joystick when connected to a PC, and supports most of the simulators on the market with a comprehensive configuration.
- Please Note The default firmware of the LIteRadio 3 Radio Transmitter (ELRS 2.4G) has been ELRS V3 since Jan 2024 instead of the previous version ELRS V2.0. LiteRadio 3 Radio Transmitter ELRS V3 no longer supports an external TX Module ! ! !
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 3.35 x 8.27 x 6.30 Inches
See On Amazon #6
BETAFPV 5pcs Lava 1S 300mAh Lipo Battery 3.8V 75C LiHV Battery with BT2.0 Connector Compatible for 1S FPV Tiny Whoop Drone Quadcopter Like Cetus, Meteor65, Meteor65 Pro 1S Brushless Drones
Asin: B0CPDG4HMS
ăPerformanceăWith An Extended Battery Cycle Life, It Ensures Prolonged Power Support, Bringing Users Sustained And Reliable Performance..
ăSuitableă Lava 1S 300Mah Lipo Battery Is Suitable For 1S Fpv Tiny Whoop Drone Like Cetus, Meteor65, Meteor65 Pro And Other 1S Fpv Racing Drone With Bt2.0 Connector..
ăDesignăLava 1S 300Mah Lipo Battery Comes With Bt2.0 Connector And Features A New Design That Symbolizes Explosive Power Akin To Molten Lava..
ăHigh C-RateăWith A Boosted Discharge Rate Of 75C, It Provides Greater Burst Power For Superior Flight Performance And Maneuverability For Unparalleled Control..
Features
- Z-Folding Process LAVA series batteries feature a Z-Folding Process, which enables efficient high-current discharge within shorter time frames, resulting in elevated discharge platforms. Compared to the Winding Process, it achieves a 0.2V higher discharge platform under equivalent loads and boasts a 5% higher energy density within the same volume, extending flight time and reducing battery replacement inconvenience.
- High C-Rate With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
- Performance With an extended battery cycle life, it ensures prolonged power support, bringing users sustained and reliable performance.
- Design LAVA 1S 300mAh Lipo Battery comes with BT2.0 connector and features a new design that symbolizes explosive power akin to molten lava.
- Suitable LAVA 1S 300mAh Lipo Battery is suitable for 1S FPV Tiny Whoop drone like Cetus, Meteor65, Meteor65 Pro and other 1S FPV racing drone with BT2.0 connector.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.24 x 2.36 x 0.39 inches | Weight: 0.02 pounds
See On Amazon #7
BETAFPV 5pcs Aquila16 Exclusive Cable BT2.0 Female-Male Adapter with 55mm 22AWG BT2.0 Connector Compatible for Aquila16 Exclusive Battery, Charge Effortless with 6 Ports Battery Charger
Asin: B0CZ5X2H39
Exclusive Battery Cable Directly Using A 6 Ports 1S Battery Charger & Adapter Or 2S Battery Charger And Voltage Tester..
This Battery Cable Boosts Charging Efficiency, Saving Time And Space, Simplifying Operations, And Facilitating Management..
This Adapter Cable Provides A Convenient Solution, Allowing You To Charge Effortlessly Your Aquila16..
Features
- Exclusive Female-Male Adapter Cable is design for Aquila16 FPV Kit, a highly recommended accessory for Aquila16 pilots.
- This adapter cable provides a convenient solution, allowing you to charge effortlessly your Aquila16.
- Exclusive battery cable directly using a 6 Ports 1S Battery Charger & Adapter or 2S Battery Charger and Voltage Tester.
- This battery cable boosts charging efficiency, saving time and space, simplifying operations, and facilitating management.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.40 x 4.30 x 2.70 Inches
See On Amazon #8
BETAFPV ELRS LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Simulator Joystick Calibration - Mode 2 ExpressLRS V3
Asin: B09CTHBWDR | Model: LiteRadio 2 SE ELRS | PartNumber: LiteRadio 2 SE ELRS
đăPerformanceăThis Elrs 2.4G Protocol Radio Transmitter Built-In 1000Mah 1S Battery, You Can Charge It By Type-C Cable Instead Of Replacing Battery. It Has A Total Of 8 Channels. Supports 3 Rf Powers Of 25Mw, 50Mw And 100Mw, And Packet Rates Of 50Hz, 150Hz, 250Hz And 500Hz.
đăAbout BindăPlease Note That The Firmware Version Of The Transmitter And The Receiver Or The Tx Module Should Be The Same One And Then Could Be Bound Together. If You Don't Know The Firmware Version, Please Contact Us Directly And We Will Solve The Problem For You..
đăExpresslrs 2.4G ProtocolăBetafpv Expresslrs 2.4G Literadio 2 Se Radio Transmitter Comes With Built-In Elrs 2.4G Tx, Which Can Achieve Long-Range Flying With Your Drones. Please Note, The Elrs Firmware Is Elrs 3.X, It Can't Be Bound With Your Equipment With Elrs 2.X Version..
đăFpv SimulatorăThis Transmitter Has The Function Of Fpv Simulator Like Other Versions Of Literadio 2, Which Can Act As A Usb Joystick When Connected To A Personal Computer, Suitable For Fpv Novices To Play Fpv Simulators Like Ereadrone.
đăBetafpv ConfiguratorăThis Transmitter Supported Betafpv Configuration With The Function Of Radio Controller Setup, Full Function Of The Expresslrs Configuration, Channel Mixer For Fix Wing Drones, And Firmware Update.
Features
- Firmware Version This LiteRadio 2 SE Transmitter's firmware is ELRS V3, it can't be bound with your equipment with ELRS 2.X version. Please make sure the receiver or the TX module has same firmware version and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you.
- BETAFPV Configurator This transmitter supported BETAFPV Configuration with the function of radio controller setup, Full function of the ExpressLRS configuration, Channel mixer for fix wing drones, and firmware update
- Performance This ELRS 2.4G protocol radio transmitter built-in 1000mAh 1S battery, you can charge it by type-c cable instead of replacing battery. It has a total of 8 channels. Supports 3 RF powers of 25mW, 50mW and 100mW, and packet rates of 50Hz, 150Hz, 250Hz and 500Hz
- FPV Simulator This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE
- About Bind Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you.
- ExpressLRS 2.4G Protocol BETAFPV ExpressLRS 2.4G LiteRadio 2 SE radio transmitter comes with built-in ELRS 2.4G TX, which can achieve long-range flying with your drones. Please note, The ELRS firmware is ELRS 3.X, it can't be bound with your equipment with ELRS 2.X version.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 3.15 x 6.50 x 4.72 inches
See On Amazon #9
BETAFPV 2pcs Aquila16 Exclusive Battery 3.8V 15C 1100mAh 1S LiHV Battery with BT2.0 Connector for Aquila16 FPV Kit, Aquila16 Brushless Drone Extend Flight Time in N/S Mode
Asin: B0CRY9BCNH
The 1100Mah Battery Is Ideal For Beginners Flying The Aquila16 Brushless Drone Seeking A Smooth Flying Experience In N/S Mode..
You Will Receive 2Pcs 1100Mah 1S Battery For Aquila16 Brushless Drone; Any Technical Support Is Needed Just Feel Free To Find Us Via Amazon..
Please Do Not Charge A Cell With Physical Damage Or In Puffed. Don't Over-Charge, Or Over-Discharge Batteries. Don't Put It Beside The High-Temperature Condition Or A Humid Environment..
Opt For The 1100Mah High-Capacity Battery For An Extended Flight Time Of Up To 8 Mins. This Longer Duration Ensures A Smoother Learning Process, Allowing You To Master Flight Skills And Control Techniques While Rapidly Advancing Your Piloting Abilities..
Features
- Dedicated to Aquila16 brushless drone, it features a modular design that enhances aerodynamics and minimizes damage during collisions.
- Opt for the 1100mAh high-capacity battery for an extended flight time of up to 8 mins. This longer duration ensures a smoother learning process, allowing you to master flight skills and control techniques while rapidly advancing your piloting abilities.
- The 1100mAh battery is ideal for beginners flying the Aquila16 brushless drone seeking a smooth flying experience in N/S mode.
- Please do not charge a cell with physical damage or in puffed. Don't over-charge, or over-discharge batteries. Don't put it beside the high-temperature condition or a humid environment.
- You will receive 2pcs 1100mAh 1S battery for Aquila16 brushless drone; Any technical support is needed just feel free to find us via Amazon.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 1.38 x 3.54 x 1.77 inches | Weight: 0.15 Pounds
See On Amazon #10
BETAFPV 6pcs BT2.0-PH2.0 Adapter Cable 22AWG for BT2.0 300mAh 1S Battery with 1.0mm Banana Connector Meteor65 1S Brushless Whoop Drone
Asin: B081CGRH4B | Model: 00313632 | PartNumber: 00313632
ăPlease Noteă Blue Represents The Positive Pole (+); White Represents The Negative Pole(-).
ăPackageăInlude 6 Pcs Bt2.0-Ph2.0 Adapter Cable.
ăSuggestionăBasicly We Don't Recommend Use Bt2.0 300Mah 1S Lipo To Ph2.0 Connector Drone With This Adapter Cable. Though The Bt2.0 Battery Is Better, But Won't Show Best Performance With Ph2.0 Connector And Don't Stable In Flight.
ăMore Durable With 1.0Mm Banana ConnectorăCompared With The Ph2.0 Crimped Pins, 1.0Mm Banana Connector Is More Durable Which Can Discharge More Currents In The Same Capacity And Provide Far More Power.
Features
- Convenient for charge BT2.0 lipo Pilots can charge BT2.0 battery by PH2.0 charger with this adapter cable, no need to buy additional BT2.0 charger. But we also have BT2.0 Battery Tester & charger for your need
- More durable with 1.0mm Banana Connector Compared with the PH2.0 crimped pins, 1.0mm Banana Connector is more durable which can discharge more currents in the same capacity and provide far more power
- Please Note Blue represents the positive pole (+); White represents the negative pole(-)
- Suggestion Basicly we don't recommend use BT2.0 300mAh 1S lipo to PH2.0 connector drone with this adapter cable. Though the BT2.0 battery is better, but won't show best performance with PH2.0 connector and don't stable in flight
- Package Inlude 6 pcs BT2.0-PH2.0 Adapter Cable
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.04 x 3.94 x 2.76 inches | Weight: 0.00 pounds
See On Amazon #11
BETAFPV 2pcs Lava 450mAh 2S 7.6V LiHV 75C FPV Lipo Battery with XT30 Connector, Rechargable Lipo Battery, for 2S FPV Racing Whoop Drone Quadcopters Like Meteor85, Pavo Pico 2S Brushless Drones
Asin: B0CPDRL5B5
đăLonger TimeăWith An Extended Battery Cycle Life, It Ensures Prolonged Power Support, Bringing Pilots Sustained And Reliable Performance..
đăPackage&SupportăYou Will Receive 2Pcs Lava 450Mah 2S Lipo Battery With Xt30 Plug; Any Technical Support Is Needed Just Feel Free To Find Us Via Amazon..
đăVarious ApplicationăLava 450Mah 2S Lipo Battery Comes With An Xt30 Plug With 16Awg Silicone Wire, Operating At 7.6V Voltage, Suitable For 2S Fpv Drones Like Meteor85, Pavo Pico And Other 2S Drones With Xt30 Connector..
đăHigh C-RateăWith A Boosted Discharge Rate Of 75C, It Provides Greater Burst Power For Superior Flight Performance And Maneuverability For Unparalleled Control..
Features
- Z-Folding Process Featuring the Z-Folding Process, it achieves a 5% energy density upgrade compared to the Winding Process, extending flight time and reducing battery replacement inconvenience.
- High C-Rate With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
- Longer Time With an extended battery cycle life, it ensures prolonged power support, bringing pilots sustained and reliable performance.
- Various Application LAVA 450mAh 2S lipo battery comes with an XT30 plug with 16AWG silicone wire, operating at 7.6V voltage, suitable for 2S FPV drones like Meteor85, Pavo Pico and other 2S drones with XT30 connector.
- Package&Support You will receive 2pcs LAVA 450mAh 2S lipo battery with XT30 plug; Any technical support is needed just feel free to find us via Amazon.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.55 x 2.48 x 0.63 inches
See On Amazon #12
BETAFPV 2pcs 450mAh 7.4V 45C 2S Lipo Battery with XT30 Plug for 2S RC Brushless Whoop Drone Quadcopter Like Meteor85, Pavo Pico, Mobula 7 2S Brushless Drone
Asin: B0BR3K4DJY | Model: 01030006_1 | PartNumber: 01030006_1
đSuitable For Meteor85, Beta75x, Mobula 7, Pavo Pico And Other 2S Brushless Whoop Drones In The Market..
đ2Pcs Betafpv 450Mah 2S 45C Lipo Battery With Xt30 Plug, Packed With Vibration-Proof & Fire-Proof Material.
đWeighs Only 28.2G/Pc With A Size Of 60.8*15.2*14.5Mm, Perfectly Suitable For The Meteor85 Whoop Frame..
đOwns A More Powerful Performance With Stronger Mobility And Higher Sensitivity Under High-Speed Flight, Which Is Suited For Whoop Drones And Toothpicks..
Features
- Features 2S, XT30 connector with 16AWG silicone wire, 7.4V voltage, and 450mAh capacity.
- Owns a more powerful performance with stronger mobility and higher sensitivity under high-speed flight, which is suited for whoop drones and toothpicks.
- Suitable for Meteor85, Beta75X, Mobula 7, Pavo Pico and other 2S brushless Whoop drones in the market.
- Weighs only 28.2g/pc with a size of 60.8*15.2*14.5mm, perfectly suitable for the Meteor85 whoop frame.
- 2pcs BETAFPV 450mAh 2S 45C Lipo battery with XT30 plug, packed with vibration-proof & fire-proof material
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.57 x 4.41 x 0.59 inches | Weight: 0.06 pounds
See On Amazon #13
BETAFPV 4pcs 1102 22000KV Brushless Motor 1S Lightweight FPV Drone Motor Compatible for F4 1S 5A/12A Flight Controller 75mm Whoop Drone Like Meteor75 1S Racing Drone Cetus Pro Quadcopter
Asin: B0BWRR93LP | Model: 01050006_2 | PartNumber: 01050006_2
With Exquisite Workmanship, Provides The Most Incredible Power And Thrust In The Lightest Weight Of 2.79G, Sturdy Structure, And High-Quality Materials Make It Performs Like A Beast..
Coming With A New Appearance Of The Black And Red Motor Bell. Lead Wire Is Soldered To The Pcb, Which Allows You To Repair It Easier Once Disconnected..
22000Kv Has A Higher Rpm And Faster Response, Which Allows The Quadcopter To Take Off With More Punch At Less Throttle. More Aggressive And Powerful For Fpv Racing. For Pilots Who Fly 75Mm Whoop Drones With 18000Kv Motors, It Is A Good Choice To Upgrade Motors To 22000Kv..
Possesses Dynamic Balance, And Crush-Resistant Damping Bearing, Which Can Eliminate Vibration Effectively. Features Great Work Efficiency For Flying Endurance, Very Suitable For 75Mm 1S Fpv Cruising Flying.
Features
- Adopts the technology of ball bearing, which effectively reduced the friction between the bearing surfaces, increased the duration of the motor, and improved its efficiency.
- Possesses dynamic balance, and crush-resistant damping bearing, which can eliminate vibration effectively. Features great work efficiency for flying endurance, very suitable for 75mm 1S FPV cruising flying
- With exquisite workmanship, provides the most incredible power and thrust in the lightest weight of 2.79g, sturdy structure, and high-quality materials make it performs like a beast.
- 22000KV has a higher RPM and faster response, which allows the quadcopter to take off with more punch at less throttle. More aggressive and powerful for FPV racing. For pilots who fly 75mm whoop drones with 18000KV motors, it is a good choice to upgrade motors to 22000KV.
- Coming with a new appearance of the black and red motor bell. Lead wire is soldered to the PCB, which allows you to repair it easier once disconnected.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.55 x 1.97 x 0.55 inches | Weight: 0.03 pounds
See On Amazon #14
BETAFPV 4pcs Lava 450mAh 1S 3.8V 75C LiHV FPV Lipo Battery with BT2.0 Connector for 1-2S FPV Tiny Whoop Drone Quadcopters Like Meteor75, Meteor75 Pro, Cetus Pro 1S Brushless Drones, Cetus X 2S Quad
Asin: B0CPDJYCGB
ăPerformanceăWith An Extended Battery Cycle Life, It Ensures Prolonged Power Support, Bringing Users Sustained And Reliable Performance..
ăSuitableă Lava 1S 450Mah Lipo Battery Is Suitable For 1-2S Fpv Tiny Whoop Drone Like Cetus Pro, Cetus X, Meteor75, Meteor75 Pro And Other 1-2S Fpv Racing Drone..
ăDesignăLava 1S 450Mah Lipo Battery Comes With Bt2.0 Connector And Features A New Design That Symbolizes Explosive Power Akin To Molten Lava..
ăHigh C-RateăWith A Boosted Discharge Rate Of 75C, It Provides Greater Burst Power For Superior Flight Performance And Maneuverability For Unparalleled Control..
Features
- Z-Folding Process LAVA series batteries feature a Z-Folding Process, which enables efficient high-current discharge within shorter time frames, resulting in elevated discharge platforms. Compared to the Winding Process, it achieves a 0.2V higher discharge platform under equivalent loads and boasts a 5% higher energy density within the same volume, extending flight time and reducing battery replacement inconvenience.
- High C-Rate With a boosted discharge rate of 75C, it provides greater burst power for superior flight performance and maneuverability for unparalleled control.
- Performance With an extended battery cycle life, it ensures prolonged power support, bringing users sustained and reliable performance.
- Design LAVA 1S 450mAh Lipo Battery comes with BT2.0 connector and features a new design that symbolizes explosive power akin to molten lava.
- Suitable LAVA 1S 450mAh Lipo Battery is suitable for 1-2S FPV Tiny Whoop drone like Cetus Pro, Cetus X, Meteor75, Meteor75 Pro and other 1-2S FPV racing drone.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.28 x 2.36 x 0.63 inches
See On Amazon #15
BETAFPV 6pcs BT2.0 U Cable Pigtail with 40mm 22AWG Male Connector, 180 U-Shaped, Ultra Light Cable for 1S FPV Micro Whoop Drone Quadcopters like Cetus Meteor Series Drones with BT2.0 Connector
Asin: B0CRVTQL3M
Bt2.0 Connector Decreased The Internal Resistance Of The Connector Effectively By Upgrading The Crimped Pins To A 1.0Mm Banana Connector And Increasing The Cross-Sectional Area Of The 1.0Mm Banana Connector..
Using The Bt2.0 Connector, Can Solve The Problem Of Voltage Sag, And The Discharge Of The 1S Lipo Battery Becomes More Efficient. Pilots Can Enjoy More Flight Time Without The Disturbance Of Low Voltage Warnings..
Bt2.0 Connector Supports 9A Continuous Current And 15A Burst, While The Ph2.0 Connector Supports 4.5A Continuous Current. Brings A More Perfect Flight Experience When You Fly The 1S Brushless Whoop Drone..
The U-Shaped Structure Features A Smooth Stepped Design, Making Battery Insertion And Removal More Convenient. It Also Enables Shorter Power Cables, Integrated Molding, Compact Dimensions, And Reduced Weight..
Features
- With its BT2.0 interface and a 180-degree U-shaped design, bid farewell to the risk of bent or broken wires. No more folding cables on quads with the use of BT2.0 U Cable Pigtail. Long-term bending and pulling may cause bending and breakage.
- The U-shaped structure features a smooth stepped design, making battery insertion and removal more convenient. It also enables shorter power cables, integrated molding, compact dimensions, and reduced weight.
- BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to a 1.0mm banana connector and increasing the cross-sectional area of the 1.0mm banana connector.
- BT2.0 connector supports 9A continuous current and 15A burst, while the PH2.0 connector supports 4.5A continuous current. Brings a more perfect flight experience when you fly the 1S brushless whoop drone.
- Using the BT2.0 connector, can solve the problem of voltage sag, and the discharge of the 1S lipo battery becomes more efficient. Pilots can enjoy more flight time without the disturbance of low voltage warnings.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.40 x 4.30 x 2.70 inches | Weight: 0.01 pounds
See On Amazon #16
BETAFPV 4pcs BT2.0 550mAh 1S Battery 3.8V 40C/80C Lipo Battery with BT2.0 Connector Compatible for 75-85mm 1S FPV Racing Whoop Drone Quadcopters Like Meteor75 Pro FPV Drone
Asin: B0BZPJX27C | Model: BT2.0 (1,0 mm Bananenstecker) | PartNumber: BT2.0 (1,0 mm Bananenstecker)
đăSuitable DroneăBt2.0 550Mah 1S Lipo Battery Weighs Only 14G/Pc With A Size Of 69.5*16.2*6.3Mm, It Is Suitable For All 1S Brushless Drones On Sale That Use Bt2.0 450Mah 1S Batterie, Including Meteor75, Meteor75 Pro. Especially For Meteor75 Pro, Pilots Will Achieve Dynamic Balance And Get Stable And Consistent Power..
đăNoticeăPlease Do Not Charge A Cell With Physical Damage Or In Puffed. Don't Over-Charge, Or Over-Discharge Batteries. Don't Put It Beside The High-Temperature Condition Or A Humid Environment..
đăBt2.0 ConnectorăBt2.0 Connector Decreased The Internal Resistance Of The Connector Effectively By Upgrading The Crimped Pins To A 1.0Mm Banana Connector And Increasing The Cross-Sectional Area Of The 1.0Mm Banana Connector..
đăPowerful PerformanceăBt2.0 550Mah 1S Battery Has Stable Current And Voltage Output And High Efficiency. Larger Capacity Ensures Strong Power And Increases The Flight Time For The Whoop Drones..
Features
- Higher Capacity Compared with the BT2.0 450mAh 1S battery, BT2.0 550mAh 1S battery updated the capacity to 550mAh. It is capable of delivering a discharge rate of 40C (continuous) and 80C (burst). Greatly improved battery discharge performance.
- Powerful Performance BT2.0 550mAh 1S Battery has stable current and voltage output and high efficiency. Larger capacity ensures strong power and increases the flight time for the whoop drones.
- Suitable Drone BT2.0 550mAh 1S lipo battery weighs only 14g/pc with a size of 69.5*16.2*6.3mm, it is suitable for all 1S brushless drones on sale that use BT2.0 450mAh 1S batterie, including Meteor75, Meteor75 Pro. Especially for Meteor75 Pro, pilots will achieve dynamic balance and get stable and consistent power.
- BT2.0 Connector BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to a 1.0mm banana connector and increasing the cross-sectional area of the 1.0mm banana connector.
- Notice Please do not charge a cell with physical damage or in puffed. Don't over-charge, or over-discharge batteries. Don't put it beside the high-temperature condition or a humid environment.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.39 x 2.76 x 0.79 Inches | Weight: 0.12 Pounds
See On Amazon #17
BETAFPV 4pcs 1102 18000KV Brushless Motor 1S FPV Motor for 1S Brushless Micro Whoop Drone Like Meteor75 1S Brushless FPV Micro Drone
Asin: B0834P2LSY | Model: 00313-1102motor | PartNumber: 00313-1102motor
ăMore PowerfulăThe 1102 18000Kv Motor Is More Powerful Than 1102 13500Kv, You Can Get More Powerul And Longer Flight Time.
ăReliable SupportăPlease Kindly Contact Us Before Leaving Any Comment Or Return, We Will Provide Technical Support To Solve All Your Product Issues.
ăWeight&CableăWeighs Only 2.9G/Pc With Connector. All Cable Connectors Are Black, No Need To Distinguish Between Cw And Ccw Motors.
ăWire ConnectionăThe Lead Wire Soldered To The Pcb, Which Allows Customer To Solder And Repair It Easily.
Features
- Compatible Drone The 1102 18000KV brushless motors are customised for Meteor75 1S Brushless micro drone, pilot can get 5min flight with BT2.0 450mAh 1S battery
- Wire connection The lead wire soldered to the PCB, which allows customer to solder and repair it easily
- More powerful The 1102 18000KV motor is more powerful than 1102 13500KV, you can get more powerul and longer flight time
- Weight&Cable Weighs only 2.9g/pc with connector. All cable connectors are black, no need to distinguish between CW and CCW motors
- Reliable Support Please kindly contact us before leaving any comment or return, we will provide technical support to solve all your product issues
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 1.18 x 2.36 x 2.76 inches | Weight: 0.01 Pounds
See On Amazon #18
BETAFPV 300mAh 1S 30C HV Battery (8pcs)
Asin: B07N99HMV6 | Ean: 0721248876775 | UPC: 721248876775
Features
- This box of eight 300mAh 1S HV batteries is a perfect way to stock up on those 1s lipos that you use up so quickly. BETAFPV upgraded their stock 1s batteries from 260mAh to 300mAh, increasing flight times to almost an extra minute. All while keeping the size almost identical, just a tiny bit longer.Perfect to use in your 1S whoops drones or in series with the 2S pigtail connector to fly 2S.SpecificationsItem: 1S batteryCapacity: 300mAhRate: 30CVoltage: 3.8VDimension: 58mm * 11mm * 6mmCapacity: 3
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.20 pounds
See On Amazon ï»ż
Looking For Something Else?
Search