KeoBin 2PC UTV Whip Mount, 360 Adjustable Heavy Duty Aluminum UTV Flag Mount, 1"-1.75"-2" Whip Light Mount Bracket for Roll Bar, Antenna of UTV ATV Polaris RZR SXS Can-Am
Asin: B0CR3XTT6Y | Model: KB-MOUNT-2 | PartNumber: KB-MOUNT-2
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Compatibility Of 4 Sizes】2Pc Utv Roll Bar Clamps Include 4 Sizes Of Non-Slip Rubber Inserts In 1" /1.5"/1.75"- 1.85". The Whip Light Mounting Bracket Diameter Is 2" With The Rubber Ring Insert Removed. Free To Choose The Size You Need, Ideal For Talon, Atvs, Utvs, Trucks, Polaris Rzr, Ranger, And Can-Am..
【Tips】The Hole Diameter Size Of The Sxs Mounting Bracket Is 12Mm(0.5"). Please Verify The Dimensions Of Your Roll Bar Before Installation..
【10-Min Quick Installtion】No Drilling Holes Or Trimming Is Required, All Needed Hardware Is Included. The 360° Adjustable Serrated Joint Structure Is Suitable For Different Mounting Angles Which Allows You To Safely And Quickly Install Any Utv Accessories To Roof Racks, Bumpers, And Roll Cages..
【Unique And Stable Design】Sxs Whip Mount Or Utv Whip Mount Adopt Corrugated Tooth Design Inside, Which Can Firmly Clamp The Rod Or Rolling Cage, Saying Goodbye To Any Looseness. The Surface Is Hard Anodized And Cnc Machined For Ultra-High Performance Against Rust And Wear..
Features
- Solid Aluminum Alloy Material The KeoBin UTV flag mount is made of solid 6061-T6 aluminum alloy, which is thicker than other whip light mounts on the market. Reinforced ribs have been added to each key area, specifically designed for off-road vehicles which ensure reliability and strength in even the most challenging environments.
- Unique and Stable Design SXS whip mount or UTV Whip mount adopt corrugated tooth design inside, which can firmly clamp the rod or rolling cage, saying goodbye to any looseness. The surface is hard anodized and CNC machined for ultra-high performance against rust and wear.
- Compatibility of 4 Sizes 2PC UTV roll bar clamps include 4 sizes of non-slip rubber inserts in 1 /1.5/1.75- 1.85. The whip light mounting bracket diameter is 2 with the rubber ring insert removed. Free to choose the size you need, ideal for Talon, ATVs, UTVs, Trucks, Polaris RZR, Ranger, and Can-Am.
- 10-Min Quick installtion No drilling holes or trimming is required, all needed hardware is included. The 360 adjustable serrated joint structure is suitable for different mounting angles which allows you to safely and quickly install any UTV accessories to roof racks, bumpers, and roll cages.
- Tips The hole diameter size of the SXS mounting bracket is 12mm(0.5). Please verify the dimensions of your roll bar before installation.
- See more on Amazon...
First Available: 04/28/2024
Brand: KeoBin | Manufacturer: KeoBin
Dimensions: 3.50 x 5.90 x 3.90 inches
See On Amazon Similar To KeoBin 2PC UTV Whip Mount
#1
ZIDIYORUO UTV Whip Mount, Light Flag Mounts UTV Accessories- Solid Heavy Whip Light Mounting Bracket for Off-Road, Aluminium Alloy - 360 Rotating Flag Hole - Fits Perfect on 1.75" to 2" Roll Cage
Asin: B09DCF6TWP | Model: flagmount001 | PartNumber: flagmount001 | Ean: 0754188755961 | UPC: 754188755961
【Flexible 360° Rotation】The Flag Bracket Can Rotate A Full 360°, Making It An Incredibly Flexible And Versatile Accessory For Any Off-Road Vehicle..
【Easy To Install】Our Mounting Kit Includes All The Necessary Hardware, And Installation Is Simple With Only Five Screws To Secure It In Place. Once Installed, The Whip Mount Or Flag Holder Will Hold Your Flag And Whip Securely In Place Over Any Terrain. Please Check The Sizing Of Your Roll Bar Prior To Installation..
【Universal Compatibility】This Light Whip Mount Is A Perfect Fit For A Range Of Off-Road Vehicles, Including Can Am Maverick X3, Polaris Rzr Xp 1000 900, Sand Rails/Buggies, Sxs, Utv Polaris Yamaha, 4X4s, And Jeeps. It Can Be Easily Installed On Any Bar Measuring 1.75" To 2"..
【Secure And Stable Design】Unlike Other Flag Brackets Or Led Whips Mounts, The Zidiyoruo Mount Features Internal Teeth That Tightly Grip The Bar Or Roll Cage, Providing A Secure And Stable Holder For Your Flag Or Light Whip..
Features
- Heavy-Duty Aluminium Mount The Zidiyoruo UTV Flags Bracket or Whips Mount is crafted from solid aluminium alloy, making it more durable than standard metal or steel, and capable of handling even the largest LED whips.
- Secure and Stable Design Unlike other flag brackets or LED whips mounts, the Zidiyoruo mount features internal teeth that tightly grip the bar or roll cage, providing a secure and stable holder for your flag or light whip.
- Flexible 360 Rotation The flag bracket can rotate a full 360 , making it an incredibly flexible and versatile accessory for any off-road vehicle.
- Universal Compatibility This light whip mount is a perfect fit for a range of off-road vehicles, including Can Am Maverick X3, Polaris Rzr XP 1000 900, Sand Rails/Buggies, SxS, UTV Polaris YAMAHA, 4x4s, and Jeeps. It can be easily installed on any bar measuring 1.75 to 2.
- Easy to Install Our mounting kit includes all the necessary hardware, and installation is simple with only five screws to secure it in place. Once installed, the whip mount or flag holder will hold your flag and whip securely in place over any terrain. Please check the sizing of your roll bar prior to installation.
- See more on Amazon...
Brand: ZIDIYORUO | Manufacturer: Zidiyoruo
Dimensions: 1.78 x 4.80 x 3.10 inches
See On Amazon #2
ZIDIYORUO Whip Light Mounts for ATV, Quad ATV Light Mounts Fit 0.875", 1", 1.125" Rack Bars and Bandlebars, Adjustable ATV Mount Made of Alloy Aluminum, Easy Installation (2 pcs Black)
Asin: B0BG2RXMLF | Model: black atv mount | PartNumber: black atv mount | Ean: 0760701795239 | UPC: 760701795239
3. 【Precision Cnc Cuts】Crafted From Cnc Machined Aluminum, Our Mounts Are Not Only Strong But Also Boast A Sleek And Polished Appearance..
5. 【Color Options】Choose From Three Color Options - Black, Red, And Blue - To Match Your Vehicle And Showcase Your Style..
6. 【360-Degree Rotation】With 12 Pins That Rotate 30 Degrees Each, You Can Find The Perfect Angle To Install Your Flag, Whip Light, Chasing Light, Or Light Bars. Enjoy Full Customization And Versatility With Our Mounts..
4. 【Trusted Brand】Zidiyoruo Is A Well-Known Brand For The Best Atv Accessories, Including Utv, Sxs, Atv Flags, And Whip Mounts. Trust Our Name And Quality To Fulfill Your Needs..
2. 【Stable And Sturdy Structure】Constructed From Solid Materials, Our Atv Flag Whip Mounts Are Designed To Withstand Even The Toughest Terrains. Heavy-Duty And Unbreakable, You Can Trust In Our Mounts To Keep Your Flag Or Whip Secure..
Features
- 1. Versatile Fitment Our ATV mounts accommodate 7/8"-9/8" (0.875", 1", 1.125") tubular bars and handlebars, perfect for RZR, Yamaha, Polaris, and many more ATV models.
- 2. Stable and Sturdy Structure Constructed from solid materials, our ATV flag whip mounts are designed to withstand even the toughest terrains. Heavy-duty and unbreakable, you can trust in our mounts to keep your flag or whip secure.
- 3. Precision CNC Cuts Crafted from CNC machined aluminum, our mounts are not only strong but also boast a sleek and polished appearance.
- 4. Trusted Brand Zidiyoruo is a well-known brand for the best ATV accessories, including UTV, SXS, ATV flags, and whip mounts. Trust our name and quality to fulfill your needs.
- 5. Color Options Choose from three color options - black, red, and blue - to match your vehicle and showcase your style.
- 6. 360-Degree Rotation With 12 pins that rotate 30 degrees each, you can find the perfect angle to install your flag, whip light, chasing light, or light bars. Enjoy full customization and versatility with our mounts.
- See more on Amazon...
Brand: ZIDIYORUO | Manufacturer: Zidiyoruo
Warranty: 1 year guarantee
See On Amazon #3
BRCOVAN 2PCS UTV Whip Light Mount, Solid Aluminum Alloy Whip Flag Mounts, Off-Road LED Light Bar Mounting Bracket, 360 Adjustable Roll Bar Clamp Mount Fit on 1.5''/1.65'' /1.75''/1.85''/2'' Roll Cage
Asin: B0BVMMGYY5 | Model: C14B-2PACK | PartNumber: C14B-2PACK
▶ The Tube Clamp Mount With 360° Rotating Flag Hole (Hole Diameter: 0.5''/12.7Mm). Ideal For A Variety Of Applications Including Whip Lights, Whip Flags, Antennas, Light Bars, Led Off Road Lights And Driving Lights..
▶ Hinged Design And Single-Bolt Locking Make Installation Easier. An Allen Key Is Included In The Package To Facilitate Your Installation..
▶ Pack Of Two.
▶ Kit Comes With Four Sizes Of Rubber Ring Inserts To Provide A Snug Fit And Protect The Mounting Surface. Rubber Ring Diameters: 1.5" (38.1Mm), 1.65" (41.91Mm), 1.75" (44.45Mm), 1.85" (46.99Mm). The Rubber Ring Can Be Increased Or Decreased According To The Diameter Of The Round Rails. The Tube Clamp Have A 2" (50.8Mm) Diameter Mounting Hole When Without The Rubber Ring Insert..
▶ Fit On 1.5''/1.65''/1.75''/1.85''/2'' Tubes For Atv, Utv, Truck, Boat, Motorcycle, Off-Road Vehicle And Farm Vehicle. It Is Applicable For Roof Racks, Roll Cages, Bull Bars, Head Racks, Roll Bars, Handlebars And More. (Please Note: Before Purchasing, Please Measure The Diameter Of The Mounting Rail To Confirm Whether This Clamp Mount Fits Your Rail)..
Features
- The bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments.
- Fit on 1.5''/1.65''/1.75''/1.85''/2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, head racks, roll bars, handlebars and more. (Please Note: Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail).
- The tube clamp mount with 360 rotating flag hole (Hole Diameter: 0.5''/12.7mm). Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights.
- Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters: 1.5 (38.1mm), 1.65 (41.91mm), 1.75 (44.45mm), 1.85 (46.99mm). The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 (50.8mm) diameter mounting hole when without the rubber ring insert.
- Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.
- Pack of two
- See more on Amazon...
Brand: BRCOVAN | Manufacturer: BRCOVAN
Weight: 0.95 pounds
See On Amazon #4
SAUTVS 2PCS Adjustable Rear Pillar Flag Antenna Mounting Brackets Rear LED Whip Light Brackets for Can Am Maverick X3 MAX 2017-2024 Accessories
Asin: B08PCNR3XT | Model: ZP-YJ-030603-038 | PartNumber: ZP-YJ-030603-038 | Ean: 0786411869992 | UPC: 786411869992
Black Coating Finish, Consistent With Your Vehicle, Make It Outstand In The Crowd.
Package Include: 1 Pair Of Antenna Mounting Brackets With All Mount Hardware.
Quick & Easy To Install, No Drilling Or Cutting.
Made Of Solid Metal, Durable Service; Adjustable Design, Make It Meet The Needs Of Various Application Scenarios.
Features
- Compatible with Can Am Maverick X3 / X3 MAX 2017-2024 (2PCS)
- Made of solid metal, durable service; Adjustable design, make it meet the needs of various application scenarios
- Black coating finish, consistent with your vehicle, make it outstand in the crowd
- Quick & easy to install, no drilling or cutting
- Package include: 1 pair of antenna mounting brackets with all mount hardware
- See more on Amazon...
Brand: SAUTVS | Manufacturer: SAUTVS
Dimensions: 3.15 x 5.91 x 1.97 inches
See On Amazon #5
Nilight 2pcs Heavy Duty Barrel Spring Mounting Base for Whip Light ATV UTV RZR SXS Can Am Truck Jeep Off Road, 2 Years Warranty
Asin: B0BLHF9K7D | Model: Whip-131 | PartNumber: Whip-131 | Ean: 0840323900201 | UPC: 840323900201
【Flexible & Protective】The Design Of The Spring Structure Can Effectively Protect Your Whip Lights Or Antennas From Being Easily Broken When Encountering Such As Low Branches, Tunnels, Eaves, And Strong Winds, And Disperse The Huge And Concentrated Impact Force Through Flexible Bending..
【Package Include】2 Spring Base, 2 Stainless Steel Nut, 4 Stainless Steel Washers. (Easy To Install, Can Be Finished Within 10Mins).
2 Years Warranty Honored By Nilight.
【Wide Application】Compatible With Most Vehicles, As Long As There Are A 0.47" Hole In The Vehicle Or Bracket For The Screws (M12*30 Thread) On The Bottom Of The Base To Mount, Such As Utv, Atv, Truck, Compatible With Can-Am, Go-Kart, Golf Cart, Dune Buggy, Sand Rail, Ambulance, Pilot Car, Etc. （Atten: Please Confirm The Size Before Order).
【Hight Strength & Durable】Made Of High-Strength Carbon Steel, Durable, Shockproof And Not Easy To Deform. Covered With Thickened Black Powder Coated, Equipped With Stainless Steel Nuts, Washers, Etc., Waterproof And Dustproof, Not Easy To Rust, Smooth Surface, Easy To Clean..
Features
- Fits Modle Fits screw with Min diameter of 0.448" and Max diameter of 0.465", suitable for LED whip, fiberglass CB antenna, center load antenna, whip lights, ect. ATTENTION: If you are looking to upgrade your whip lights purchased at Nilight, then please note that this spring mount will only fit NON-SPRING Mount models.
- Hight Strength & Durable Made of high-strength carbon steel, durable, shockproof and not easy to deform. Covered with thickened black powder coated, equipped with stainless steel nuts, washers, etc., waterproof and dustproof, not easy to rust, smooth surface, easy to clean.
- Flexible & Protective The design of the spring structure can effectively protect your whip lights or antennas from being easily broken when encountering such as low branches, tunnels, eaves, and strong winds, and disperse the huge and concentrated impact force through flexible bending.
- Wide Application Compatible with most vehicles, as long as there are a 0.47 hole in the vehicle or bracket for the screws (M12*30 thread) on the bottom of the base to mount, such as UTV, ATV, Truck, compatible with Can-am, go-kart, golf cart, dune buggy, sand rail, ambulance, pilot car, etc. Atten: please confirm the size before order)
- Package Include 2 Spring Base, 2 stainless steel nut, 4 stainless steel washers. (Easy to install, can be finished within 10mins)
- 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: NIlight
Warranty: 2 Years Warranty
See On Amazon #6
2 PCS UTV Flag Mount/ UTV Whip Mount for 1.75" & 2" Roll Cage Compatible with Can Am X3 Polaris RZR 900 1000 XP Pro Turbo Can Am Maverick Commander SXS(Heavy Duty 360 Adjustable,Aluminum )
Asin: B09DVD8FFY | Model: 18312 | PartNumber: 18312 | Ean: 0774941282718 | UPC: 774941282718
★Design: The 12-Hole Design Allows You To Adjust To Your Favorite Or Suitable Angle, And At The Same Time Make The Utv Bracket More Powerful And Stable. The Ring Mouth Of The Flagpole Holder Is Wavy, Making It Better Fixed On Your Utv..
★Installation: No Modification Or Drilling Is Required. Tools And Accessories Are Already Included. It Can Be Installed Easily Just By Tightening The Screws ..
★Material: Made Of Aluminum Alloy, Cnc Cut, Thicker Than Other Brackets On The Market, Light And Strong, With A Perfect Appearance..
★Function：Mounting A Flag& Fog Light & Whip Light To Your Machine Will Give Other Riders Notice That You Are On The Dune Hill, Track, Or Trail. But Flag Or Whip Light Come In Different Styles, You May Not Be Able To Find The Perfect Spot To Install It, So That Is What The Flag Mounts For..
Features
- Application: Z8LED whip light holder fits for 1.75 & 2 inches roll bar. such as RZR 900/ 1000/ XP/ Pro, Maverick/ x3/ Commander, Talon, Mule YXZ, and the list goes on.
- Function Mounting a flag& fog light & whip light to your machine will give other riders notice that you are on the dune hill, track, or trail. But flag or whip light come in different styles, you may not be able to find the perfect spot to install it, so that is what the flag mounts for.
- Design: The 12-hole design allows you to adjust to your favorite or suitable angle, and at the same time make the UTV bracket more powerful and stable. The ring mouth of the flagpole holder is wavy, making it better fixed on your utv.
- Material: Made of aluminum alloy, CNC cut, thicker than other brackets on the market, light and strong, with a perfect appearance.
- Installation: No modification or drilling is required. Tools and accessories are already included. It can be installed easily just by tightening the screws .
- See more on Amazon...
Brand: Z8 | Manufacturer: Z8LED
See On Amazon #7
OHMU Flag Mount for led Whip Lights,Whips and Rocks Lights
Asin: B0B2R5RLSC | Ean: 0798056236428 | UPC: 798056236428
Ohmu Flag Mount For Led Whip Lights,Whips And Rocks Lights.
Ohmu Flag Mount For Led Whip Lights,Whips And Rocks Lights.
Ohmu Flag Mount For Led Whip Lights,Whips And Rocks Lights.
Ohmu 1 Set Flag Mount For One Flag,If You Have Two Flags,You Need To Chose The Mount Of 2..
Features
- OHMU Flag Mount for led whip lights,whips and rocks lights
- OHMU 1 set Flag Mount for one flag,if you have two flags,you need to chose the mount of 2.
- OHMU Flag Mount for led whip lights,whips and rocks lights
- OHMU Flag Mount for led whip lights,whips and rocks lights
- OHMU Flag Mount for led whip lights,whips and rocks lights
- See more on Amazon...
Brand: OHMU | Manufacturer: OHMU
See On Amazon #8
KEMIMOTO UTV Whip Mount Flag Whip Light Mount 2PCS, Heavy Duty Adjustable for 1.75-2 inch Roll Bar Cage Compatible with RZR 900 1000 XP Pro Turbo Maverick Commander
Asin: B0B2V925P7 | Model: B0111-02507BK(2) | PartNumber: B0111-02507BK(2)
【Easy To Install】Easy To Install With The Mounting Tool, Directly Bolt-On Design, No Drilling Or Trimming. The Whip Light Mounting Angle Can Be Adjusted, You Can Only Loosen One Bolt And Change It To The Perfect Angle You Want..
【Fitment】Utv Flag Mount Is Compatible With All Utv, Such As Compatible With Rzr 900/ 1000/ Xp/ Pro, Compatible With Maverick/ X3/ Commander, Compatible With Talon, Mule Yxz, And The List Goes On. The Utv Flag Mount Can Be Mounted On A 1.75"- 2" Roll Bar..
【Adaptability】The Hole Diameter Size Of The Utv Whip Mount Is About 12.2Mm/0.48Inch, That Is To Say, You Can Attach Anything To This Whip Light Mount As Long As Its Base Size Is 12Mm..
【More Sturdy Construction】 Our Different Inner Shape Makes The Construction More Stable. Prevent Hole Wear Problems Caused By Long-Term Use Of Screws..
Features
- Function Mounting a flag or whip light to your machine will give other riders notice that you are on the track, trail, or dune.
- More Sturdy Construction Our different inner shape makes the construction more stable. Prevent hole wear problems caused by long-term use of screws.
- Easy to Install Easy to install with the mounting tool, directly bolt-on design, no drilling or trimming. The whip light mounting angle can be adjusted, you can only loosen one bolt and change it to the perfect angle you want.
- Adaptability The hole diameter size of the utv whip mount is about 12.2mm/0.48inch, that is to say, you can attach anything to this whip light mount as long as its base size is 12mm.
- Fitment UTV Flag Mount is compatible with all UTV, such as compatible with RZR 900/ 1000/ XP/ Pro, Compatible with Maverick/ x3/ Commander, Compatible with Talon, Mule YXZ, and the list goes on. The utv flag mount can be mounted on a 1.75- 2 roll bar.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 2.36 x 5.51 x 3.03 Inches | Weight: 0.66 pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon #9
BRCOVAN 2PCS UTV Whip Light Mount, Solid Aluminum Alloy Whip Flag Mounts, Off-Road LED Light Bar Mounting Bracket, Heavy Duty Roll Bar Clamp Mount Fit on 1.5''/1.65'' /1.75''/1.85''/2'' Roll Cages
Asin: B0C96LTJCD | Model: C14B-RED-2PACK | PartNumber: C14B-RED-2PACK
▶ The Tube Clamp Mount With 360° Rotating Flag Hole (Hole Diameter: 0.5''/12.7Mm). Ideal For A Variety Of Applications Including Whip Lights, Whip Flags, Antennas, Light Bars, Led Off Road Lights And Driving Lights..
▶ Hinged Design And Single-Bolt Locking Make Installation Easier. An Allen Key Is Included In The Package To Facilitate Your Installation..
▶ Color: Red, Quantity: 2 Pcs.
▶ Kit Comes With Four Sizes Of Rubber Ring Inserts To Provide A Snug Fit And Protect The Mounting Surface. Rubber Ring Diameters: 1.5" (38.1Mm), 1.65" (41.91Mm), 1.75" (44.45Mm), 1.85" (46.99Mm). The Rubber Ring Can Be Increased Or Decreased According To The Diameter Of The Round Rails. The Tube Clamp Have A 2" (50.8Mm) Diameter Mounting Hole When Without The Rubber Ring Insert..
▶ Fit On 1.5''/1.65''/1.75''/1.85''/2'' Tubes For Atv, Utv, Truck, Boat, Motorcycle, Off-Road Vehicle And Farm Vehicle. It Is Applicable For Roll Bars, Roof Racks, Roll Cages, Bull Bars, Head Racks, Handlebars And More. (Please Note: Before Purchasing, Please Measure The Diameter Of The Mounting Rail To Confirm Whether This Clamp Mount Fits Your Rail)..
Features
- The rail bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments.
- Fit on 1.5''/1.65''/1.75''/1.85''/2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roll bars, roof racks, roll cages, bull bars, head racks, handlebars and more. (Please Note: Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail).
- The tube clamp mount with 360 rotating flag hole (Hole Diameter: 0.5''/12.7mm). Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights.
- Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters: 1.5 (38.1mm), 1.65 (41.91mm), 1.75 (44.45mm), 1.85 (46.99mm). The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 (50.8mm) diameter mounting hole when without the rubber ring insert.
- Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.
- Color: Red, Quantity: 2 PCS
- See more on Amazon...
Brand: BRCOVAN | Manufacturer: BRCOVAN
Dimensions: 0.77 x 4.00 x 3.00 inches
Warranty: 1 year
See On Amazon #10
KEMIMOTO Whip Light Mount 2PCS, Heavy Duty CNC Machined Aluminum 360 Adjustable UTV Whip Mount, Fit 1.75"-2" Roll Bar, Fit Whip Light Flag Pod Light Bar Antenna
Asin: B08RS5YKL4 | Model: B0111-02504BK(2) | PartNumber: B0111-02504BK(2)
360° Stable Adjustable: 12 Pins On The Base Allow Angle Adjustment From 30° To 360°. Sturdy Material, Precision Mechanism, And Screw Fixing, Provide A Secure Mounting Bracket For Lights And Flags..
Fitment: This Utv Whip Mount Fits 1.75"-2" Roll Bar, Is Compatible With Can-Am Maverick X3 & X3 Max, Polaris Rzr, Talon, Kawasaki Mule & Teryx... Does Not Fit Pro-Fit Cage And Atv..
Application: 12.2Mm (0.48Inch) Hole Diameter Of The Mount Works Well With Whip Lights, Flags, Light Bars, Light Pods, Antennas….
Easy To Install: Installation Requires Only Screws, No Drilling Or Trimming. All Necessary Mounting Tools And Hardware Are Included..
Features
- HEAVY-DUTY CNC-MACHINED ALUMINUM: The whip mount is made with CNC aluminum machining. Precision machining, excellent mechanical strength, beautiful glossy appearance, make this UTV whip mount the premium and solid product.
- EASY TO INSTALL: Installation requires only screws, no drilling or trimming. All necessary mounting tools and hardware are included.
- 360 STABLE ADJUSTABLE: 12 pins on the base allow angle adjustment from 30 to 360 . Sturdy material, precision mechanism, and screw fixing, provide a secure mounting bracket for lights and flags.
- APPLICATION: 12.2mm (0.48inch) hole diameter of the mount works well with whip lights, flags, light bars, light pods, antennas
- FITMENT: This UTV whip mount fits 1.75-2 roll bar, is compatible with Can-Am Maverick X3 & X3 MAX, Polaris RZR, Talon, Kawasaki Mule & Teryx... Does not fit Pro-Fit cage and ATV.
- See more on Amazon...
Brand: KEMIMOTO | Manufacturer: KEMIMOTO
Dimensions: 1.42 x 4.53 x 3.07 inches | Weight: 0.66 Pounds
Warranty: Manufacturer warranty for 12 months from date of purchase
See On Amazon
Looking For Something Else?
Search