QWORK Jerry Can Gasket Replacement, 24 Pcs Spout Rubber Seals for 20L/5 Gallon NATO Jerry Can
Asin: B0CRRSJQBQ | Ean: 0795973624048 | UPC: 795973624048
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Size: The Size Of The Jerry Can Seal Is Approximately 55 X 48 X 5 Mm..
Package Includes: 24 Pcs Jerry Can Gasket Replacement, Meet Your Daily Needs..
Application: Fits Nato 20 Liter (5-Gallon) Nato Jerry Can Spout..
Durable Material: Jerry Can Gaskets Are Made Of Thick Rubber, Which Can Absorb External Shock And Enhance Sealing Performance..
Features
- Replacement: These washers are very suitable for replacing old washers to renew the sealing performance of the oil barrel.
- Durable Material: Jerry can gaskets are made of thick rubber, which can absorb external shock and enhance sealing performance.
- Size: The size of the Jerry can seal is approximately 55 x 48 x 5 mm.
- Application: Fits NATO 20 liter (5-gallon) NATO jerry can spout.
- Package Includes: 24 Pcs Jerry Can Gasket Replacement, meet your daily needs.
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
Dimensions: 1.89 x 2.17 x 2.17 inches
See On Amazon Similar To QWORK Jerry Can Gasket Replacement
#1
Gas Can Spout Replacement, Gas Can Nozzle (6Kit-Yellow) With 12 Screw Collar Caps(6 Coarse Thread &6 Fine Thread-Fits Most of The Cans) With Gas Can Vent Caps, Thick Rubber Pad, Spout Cover, Base Caps
Asin: B0BMB294JF | Model: FOANRIY-Y01 | PartNumber: FOANRIY-Y01 | Ean: 0046432116636 | UPC: 046432116636
Anti-Overflow Design,(Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Con Spout Cap Is Hexagonal)The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down.
Simple To Install,Each Set Of Products Includes,12 Screw Collar Caps(6 Coarse Thread & 6 Fine Thread) 6 Yellow Spouts And Rubber Gaskets, 6 Nozzle Caps With Threads，2 Kinds Of Gas Con Vent Caps . And The Drill Bit Needed To Install The Gas Con Vent Caps . During The Installation And Use Process, If You Need Assistance, You Can Contact Us, And We Will Serve You As Quickly As Possible.
Can Cover More Oil Cans, We Provide Two Oil Cans With Vent Caps,(Gas Con Vent Caps-A Is Used For Oil Cans Without A Vent At The End Of The Oil Can,All You Need Is A Simple Drilling And Installation And You Are Ready To Use) (Gas Con Vent Caps-B Is Used For Another Oil Can With A Vent Cap At The Tail , Can Replace Old Vent Caps).
High-Quality Materials, These Gas Can Nozzle Replacement Parts Are Made Of High-Quality Hdpe Materials,In Use, You Can Bend Freely Without Breaking.Thicker And Widened Rubber Gaskets,Can Better Fit The Bottle Cap,Prevent Liquid Leakage When Refueling.
Features
- Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing
- High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling
- Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down
- Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps)
- Simple to install,Each set of products includes,12 Screw Collar Caps(6 Coarse Thread & 6 Fine Thread) 6 yellow Spouts and rubber gaskets, 6 nozzle caps with threads 2 kinds of gas con vent caps . And the drill bit needed to install the gas con vent caps . During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible
- See more on Amazon...
Brand: FOANRIY | Manufacturer: FOANRIY
Warranty: Yes
See On Amazon #2
Replacement Gas Can Spouts Improved Design Gasket Flexible Pour Nozzle with Vent Cap for Older Gas Can Fuel Water Jug 1 2 5 Gallon White
Asin: B0B63KKYQM
Push - In Vent Cap For Faster And Safer Emptying, Lanyard For Retaining The Cap To Prevent Loss.
Each Kit Includes: (1) Filler Nozzle, (1) Spout Cap With Lanyard, (1) "O" Ring Gasket, (2) Base Caps, (1) Yellow Push-In Vent Cap,(1)Black Rear Vent Cap,(1)Drill Bit. 3 Kits Included.
Compatible With Most Of Gas Cans And 1/2/5/10 Gallon: Universal Gas Can Spout Kit Comes With Two Different Collar Screw Cap, Fine Thread And Coarse Thread Collar Cap ,Fit Most Of The Cans.
Flexible Nozzle Can Be Bent To Adjust Various Angles Make Gas/Water Easily Flows Out Without The Need For Other Devices And No More Spilling.
Features
- Fuel can spouts are made of high strength ABS plastic, improved gasket more reliable and no leak
- Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling
- Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss
- Compatible with Most of gas cans and 1/2/5/10 gallon: Universal gas can spout kit comes with two different collar screw cap, fine thread and coarse thread collar cap ,fit most of the cans
- Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) O ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap,(1)drill bit. 3 Kits included
- See more on Amazon...
Brand: WHSSFINE
See On Amazon #3
Gas Can Spout Replacement Universal Kit Leakproof Angle Nozzles Gasket Filter Screen Vent Cap Drill Bit for Old Style Gas Can Compatible with Midwest Blitz Gott Rubbermaind Essence Scepter Pack of 3
Asin: B0CH8XV7MW
Labor-Saving: Gas Can Spout With A Unique Angle Design Makes It Easy To Pour Without The Need For Other Devices And Bending Tube.
High Compatibity: Fuel Can Spout Replacement Kit Include 2 Type Of Thread Cap(Fine & Coarse), Fit For Most Water Jug Gas Can Pre-2009.
Complete Kit: Spout Replacement Vent Kit Come With All The Parts You Need Include Spout And Cap,Vent Cap, Base Cap, Filter Screen,Gaskets And Drill Bit. You Won't Need To Buy Another Part Seperately.
Time-Saving: Push In Vent Cap For Faster And Safer Emptying, Filter/Flame Arrestor Prevent Any Serious Damage For Smoother And Cleaner Pouring.
Fuel-Saving: With This Replacement Nozzle To Pour The Liquid, You Will Never Spill Gas All Over Yourself And Your Equipment Again.
Features
- HIGH QUALITY: Gas can nozzle kit are made of UPGRADE plastic that not easy to crack,thicker and widened rubber gaskets can better fit the bottle cap, Prevent liquid leakage when refueling
- FUEL-SAVING: With this replacement nozzle to pour the liquid, you will never spill gas all over yourself and your equipment again
- LABOR-SAVING: Gas can spout with a Unique Angle Design makes it easy to pour without the need for other devices and bending tube
- TIME-SAVING: Push in vent cap for faster and safer emptying, filter/flame arrestor prevent any serious damage for smoother and cleaner pouring
- HIGH COMPATIBITY: Fuel can spout replacement kit include 2 type of thread cap(FINE & COARSE), Fit for most water jug gas can pre-2009
- COMPLETE KIT: Spout replacement vent kit come with all the parts you need include spout and cap,vent cap, base cap, filter screen,gaskets and drill bit. You won't need to buy another part seperately
- See more on Amazon...
Brand: Deelink
See On Amazon #4
Gas Can Cap, Gas Can Cap Replacement (4 kits), High Compatibility, Fits most 1/2/3/5 gallon gas can, Thickened cover and seal design, More durable and better sealing
Asin: B0BY4TBDKB | Ean: 0046432116674 | UPC: 046432116674
Gas Can Covers Replacement, As Shown In The Picture, These Covers Can Replace Most Of Your Gas/Diesel/Water Cans. And Well Made. Give Your Gas Tank A New Look..
Easy To Install, And Durable. Make Your Oil Jug Great Again. If You Need Help With The Installation And Use Process, You Can Contact Us And We Will Be At Your Service As Soon As Possible..
Gas Can Cap Gasket, Using High Quality Materials, Wider And Thicker Gas Can Cap Seal, Better Fit The Cap, Gas Can Cap No Spill, Can Effectively Prevent The Liquid From Overflowing In The Process Of Transportation..
Gas Can Cap, The Gas Can Mouth Size That Can Be Installed Is 1.73In To 1.82In. Please Measure The Size Of Your Gas Can Spout Before Purchasing. New Upgraded Lid, Lowered Height. Make Sure The Gas Tank Lid Can Be Completely Sealed..
Features
- Gas can cap,Includes 4 coarse threaded gas can caps, solid bottom cap, superb compatibility, fits most 1/2/5/10 gallon gas cans, Replacement old gas can caps.
- Gas Can Cap, The gas can mouth size that can be installed is 1.73in to 1.82in. Please measure the size of your gas can spout before purchasing. New upgraded lid, lowered height. Make sure the gas tank lid can be completely sealed.
- Gas Can Covers Replacement, As shown in the picture, these covers can replace most of your gas/diesel/water cans. And well made. Give your gas tank a new look.
- Gas can cap gasket, Using high quality materials, Wider and thicker gas can cap seal, better fit the cap, gas can cap no spill, can effectively prevent the liquid from overflowing in the process of transportation.
- Easy to install, And durable. Make your oil jug great again. If you need help with the installation and use process, you can contact us and we will be at your service as soon as possible.
- See more on Amazon...
Brand: FOANRIY
See On Amazon #5
Wavian USA JC0020RVS Red Authentic NATO Jerry Fuel Can and Spout System (20 Liter)
Asin: B011AJF0PE | Model: JC0020RVS | PartNumber: JC0020RVS | Ean: 0856460005044 | UPC: 856460005044
Bayonet Style Quick Release Nozzle.
Made In Europe.
Legal For Sale In All Of North America.
Highest Spec Steel Jerry Can In The World.
Features
- The Only Military Grade Rust Proof Steel EPA and CARB Compliant Jerry Can on the Market
- Highest spec steel jerry can in the world
- Bayonet style quick release nozzle
- Legal for sale in all of North America
- Made in Europe
- See more on Amazon...
First Available: 02/23/2016
Brand: Wavian | Manufacturer: Wavian USA
Dimensions: 6.00 x 18.50 x 13.50 Inches | Weight: 0.20 Pounds
See On Amazon #6
Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3
Asin: B08T8FTWMV | Ean: 0647097247262 | UPC: 647097247262
Push - In Vent Cap For Faster And Safer Emptying, Lanyard For Retaining The Cap To Prevent Loss.
Each Kit Includes: (1) Filler Nozzle, (1) Spout Cap With Lanyard, (1) "O" Ring Gasket, (2) Base Caps, (1) Yellow Push-In Vent Cap,(1)Black Rear Vent Cap. 3 Kits Included.
Flexible Nozzle Make Gas/Water Easily Flows Out Without The Need For Other Devices And No More Spilling.
Replacement Gas Can Spout Kit Update Your Old Cans Instead Of Buying A New One.
Features
- Fuel tank spouts are made of high strength ABS plastic, improved gasket no leak
- Replacement gas can spout kit update your old cans instead of buying a new one
- Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss
- Flexible nozzle make gas/water easily flows out without the need for other devices and no more spilling
- Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) O ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap. 3 Kits included
- See more on Amazon...
Brand: Nother
See On Amazon #7
Captain O-Ring Replacement 3043B O-Rings for VP Racing Fuels 3042 Gas Can/Utility Jug Caps (6 Pack)
Asin: B0CH1L2PPT | Ean: 0810061941347 | UPC: 810061941347
Pack Contains Six (6) O-Rings (Also Called Gaskets Or Seals)..
Manufactured And Warrantied By Captain O-Ring Llc. Proudly Assembled In The Usa!.
Restore Your Leaking 3042 Jug Cap To Working Order With These Exact Oem Match O-Rings. Molded From Oem Spec Buna-N Rubber For Compatibility With Gasoline, Diesel, Kerosene, Fuel Treatments/Stabilizers, And More!.
Compatible With Vp Racing Fuels 3042 Gas Can Jug Caps Found On Vp Racing Gas Cans And Utility Jugs. Not Compatible With Other Cans/Jugs. See Photos For Details On Compatible Cans..
Features
- Part Number: 3043B O-Ring
- Compatible with VP Racing Fuels 3042 Gas Can Jug Caps found on VP Racing gas cans and utility jugs. Not compatible with other cans/jugs. See photos for details on compatible cans.
- Pack contains six (6) o-rings (also called gaskets or seals).
- Restore your leaking 3042 jug cap to working order with these exact OEM match o-rings. Molded from OEM spec Buna-N rubber for compatibility with gasoline, diesel, kerosene, fuel treatments/stabilizers, and more!
- Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!
- See more on Amazon...
Brand: Captain O-Ring | Manufacturer: Captain O-Ring LLC
See On Amazon #8
Mission Automotive Jerry Can Gaskets - 5 Pack Gas Can Spout Replacement for 20 Liter NATO Jerry Can Spout - Sturdy Rubber Material (4 x 0.7 x 4 Inches)
Asin: B01EYXVU70 | Model: BHBUSAZIN025427 | PartNumber: BHBUSAZIN025427 | Ean: 0646341537623 | UPC: 646341537623
Reliable Quality - The Ring Can Gaskets Are Made Of Rubber Material That Is Durable And Sturdy To Help Prevent Wear And Tear While Providing You With Long-Lasting Use For Your Gas Cans.
Please Note - Our Fuel Can Gaskets Are An Aftermarket Replacement Product Meeting Or Exceeding The Quality Of Oem Gaskets (Based On In-House Testing). Not For Use With Other Sizes Of Nato Jerry Cans / Gerry Cans Or Other Gas Can Types. We Recommend Carefully Checking The Product Details And Dimensions Before Purchasing.
Value Pack - You Will Receive 5 Replacement Gaskets That Are Great For Nato Gas Can Owners, So You Are Never Without A Fresh Gasket When Traveling.
The Perfect Fit - This Set Of Jerry Can Gaskets Perfectly Fits Steel/Metal Uk And European Cans To Hold A Variety Of Liquids Such As Gas, Diesel, Oil, And Water. Fits Nato 20 Liters (5-Gallon Nato Jerry Can) Military Spec Jerry Gas Cans/Spouts.
Features
- Rubber Gasket - Jerry can gaskets become brittle and warped over time, reducing their ability to create a seal and hold liquids inside. Thanks to Mission Automotive Replacement Can Gaskets, you'll be replacing old gaskets to renew your jerry can's holding power
- The Perfect Fit - This set of jerry can gaskets perfectly fits steel/metal UK and European cans to hold a variety of liquids such as gas, diesel, oil, and water. Fits NATO 20 liters (5-gallon NATO jerry can) military spec jerry gas cans/spouts
- Reliable Quality - The ring can gaskets are made of rubber material that is durable and sturdy to help prevent wear and tear while providing you with long-lasting use for your gas cans
- Value Pack - You will receive 5 replacement gaskets that are great for NATO gas can owners, so you are never without a fresh gasket when traveling
- Please Note - Our fuel can gaskets are an aftermarket replacement product meeting or exceeding the quality of OEM gaskets (based on in-house testing). Not for use with other sizes of NATO jerry cans / gerry cans or other gas can types. We recommend carefully checking the product details and dimensions before purchasing
- See more on Amazon...
Brand: Mission Automotive | Manufacturer: Mission Automotive
Dimensions: 4.00 x 4.00 x 0.70 inches
See On Amazon #9
Captain O-Ring Replacement 6235 O-Rings for No-Spill Gas Can Nozzle Assembly (4 Pack)
Asin: B0CG2K9LJP | Ean: 0810061941309 | UPC: 810061941309
Molded From Buna-N Rubber For Long Lasting Durability And Resistance To Gasoline, Diesel, Kerosene, Fuel Stabilizers/Conditioners, And More..
Manufactured And Warrantied By Captain O-Ring Llc. Proudly Assembled In The Usa!.
Contains Four (4) O-Rings, Allowing You To Replace Your Leaking Nozzle O-Ring And Keep Spares On Hand For The Future..
Features
- Replacement # 6235 O-Rings compatible with No-Spill Gas Can Nozzle Assembly (Nozzle Assembly Part Number 6132). Not compatible with other gas cans, spouts, or nozzles.
- Contains four (4) o-rings, allowing you to replace your leaking nozzle o-ring and keep spares on hand for the future.
- Molded from Buna-N rubber for long lasting durability and resistance to gasoline, diesel, kerosene, fuel stabilizers/conditioners, and more.
- Manufactured and warrantied by Captain O-Ring LLC. Proudly assembled in the USA!
- See more on Amazon...
Brand: Captain O-Ring | Manufacturer: Captain O-Ring LLC
See On Amazon #10
(6 Pack) Gas Can Spout Gasket Seals - Rubber Replacement Gasoline/Fuel Jug Washer Seals (Upgraded Version, Compatible with Ethanol, Stabilizer, etc)
Asin: B082T434PR | Ean: 0604015686695 | UPC: 604015686695
Refit Your Leaking Gas Container With A New Spout Seal Rather Than Purchasing A Whole New Gas Can..
Check Out The Product Photos For Product Dimensions To Compare To Your Existing Gasket/Gas Can Spout..
Easily Slips/Stretches Onto Many Common Gas Can Spouts. Compatible With Scepter Easy-Flo Spouts, Rotopax Rx-R3g, And Many Other Common Spouts. Check Out The Product Photos For Dimensions To Check If It Matches The Gasket On Your Gas Can..
Upgraded Synthetic Rubber Lasts Longer Than The Seal That Came With Your Gas Can. Compatible With Gasoline, Gasoline W/ Ethanol, 2-Stroke Oils, Diesel, Diesel Fuel Additive, Fuel Stabilizers, Kerosene, Etc, For The Longest Lasting Gas Can Seal Available..
Features
- Includes 6 Gas Can Spout Seals. Fits many standard plastic jerry can spouts, including 1, 2, 2.5, 5, 10, 20 gallon cans and 5 and 10 liter jugs/tanks.
- Upgraded synthetic rubber lasts longer than the seal that came with your gas can. Compatible with Gasoline, Gasoline w/ Ethanol, 2-Stroke Oils, Diesel, Diesel Fuel Additive, Fuel Stabilizers, Kerosene, etc, for the longest lasting gas can seal available.
- Refit your leaking gas container with a new spout seal rather than purchasing a whole new gas can.
- Easily slips/stretches onto many common gas can spouts. Compatible with Scepter Easy-Flo spouts, Rotopax RX-R3G, and many other common spouts. Check out the product photos for dimensions to check if it matches the gasket on your gas can.
- Check out the product photos for product dimensions to compare to your existing gasket/gas can spout.
- See more on Amazon...
Brand: Captain O-Ring | Manufacturer: Captain O-Ring LLC
See On Amazon #11
Fuel Gas Can Jug Spouts Nozzles Rings & Caps for Blitz 900302 900092 900094 Old Style, Use for Fuel, Diesel, Kerosene, Gas and Water - 5 gallon gas can spout (3 Pcs)
Asin: B0C9J63QJ9
Note: If Your Blitz Can Has A Flexible Clear Spout, Because The Ring Has A Different Od Size And Thread, Then Our Product Will Not Fit..
Products Are Used To Replace Old Or Damaged Fuel Gas Can Jug Spouts, The Products Are Made Of High Quality Abs Plastic. The Threaded Bottom Ring And Secure Locking Nozzle Tip Are Designed So That These Products Can Be Handled Or Transported Without Problems Such As Leaks..
Products Are Used To Replace Old Or Damaged Fuel Gas Can Jug Spouts, The Products Are Made Of High Quality Abs Plastic. The Threaded Bottom Ring And Secure Locking Nozzle Tip Are Designed So That These Products Can Be Handled Or Transported Without Problems Such As Leaks..
The Product "May" Also Be Compatible With Kolpin, Rotopax, Scepter And Other Products With The Same Spout Number As Blitz. For Your Pleasant Shopping Experience, Please Check The Product Size Information Carefully Before Purchasing..
Compatible With Blitz 900092 900094 900302 Of Lightning Self-Exhaust Nozzles (Old Style)..
Features
- Product Information: 3 * Lightning Spouts, 3 * Rings and 3 * Yellow Cap, Please refer to the pictures for product specific size information.
- Compatible with Blitz 900092 900094 900302 of lightning self-exhaust nozzles (Old Style).
- Note: If your blitz can has a flexible clear spout, because the ring has a different OD size and thread, then our product will not fit.
- The product may also be compatible with Kolpin, Rotopax, Scepter and other products with the same spout number as Blitz. For your pleasant shopping experience, please check the product size information carefully before purchasing.
- Products are used to replace old or damaged Fuel Gas Can Jug Spouts, The products are made of high quality ABS plastic. The threaded bottom ring and secure locking nozzle tip are designed so that these products can be handled or transported without problems such as leaks.
- Products are used to replace old or damaged Fuel Gas Can Jug Spouts, The products are made of high quality ABS plastic. The threaded bottom ring and secure locking nozzle tip are designed so that these products can be handled or transported without problems such as leaks.
- See more on Amazon...
Brand: LIZEWEI
See On Amazon #12
Gas Can Spout Replacement Universal Kit Leakproof Angle Nozzles Gasket Filter Screen Vent Cap Drill Bit for Old Style Gas Can Compatible with Midwest Blitz Gott Rubbermaind Essence Scepter (4black)
Asin: B0CP7CSGBC
Labor-Saving: Gas Can Spout With A Unique Angle Design Makes It Easy To Pour Without The Need For Other Devices And Bending Tube.
High Compatibity: Fuel Can Spout Replacement Kit Include 2 Type Of Thread Cap(Fine & Coarse), Fit For Most Water Jug Gas Can Pre-2009.
Complete Kit: Spout Replacement Vent Kit Come With All The Parts You Need Include Spout And Cap,Vent Cap, Base Cap, Filter Screen,Gaskets And Drill Bit. You Won't Need To Buy Another Part Seperately.
Time-Saving: Push In Vent Cap For Faster And Safer Emptying, Filter/Flame Arrestor Prevent Any Serious Damage For Smoother And Cleaner Pouring.
Fuel-Saving: With This Replacement Nozzle To Pour The Liquid, You Will Never Spill Gas All Over Yourself And Your Equipment Again.
Features
- HIGH QUALITY: Gas can nozzle kit are made of UPGRADE plastic that not easy to crack,thicker and widened rubber gaskets can better fit the bottle cap, Prevent liquid leakage when refueling
- FUEL-SAVING: With this replacement nozzle to pour the liquid, you will never spill gas all over yourself and your equipment again
- LABOR-SAVING: Gas can spout with a Unique Angle Design makes it easy to pour without the need for other devices and bending tube
- TIME-SAVING: Push in vent cap for faster and safer emptying, filter/flame arrestor prevent any serious damage for smoother and cleaner pouring
- HIGH COMPATIBITY: Fuel can spout replacement kit include 2 type of thread cap(FINE & COARSE), Fit for most water jug gas can pre-2009
- COMPLETE KIT: Spout replacement vent kit come with all the parts you need include spout and cap,vent cap, base cap, filter screen,gaskets and drill bit. You won't need to buy another part seperately
- See more on Amazon...
Brand: Deelink
See On Amazon #13
JERRY CAN SPOUT for 5 Gallon Military and Blitz Gas Cans
Asin: B0CQ8SFXQY
Includes Gasket And Cap.
Flexible For Easy Use.
Stainless Steel Construction.
Features
- FITS UNLEADED FUEL TANKS
- STAINLESS STEEL CONSTRUCTION
- INCLUDES GASKET AND CAP
- FLEXIBLE FOR EASY USE
- See more on Amazon...
Brand: HQ Company | Manufacturer: Import
Dimensions: 10.00 x 3.01 x 3.01 inches | Weight: 0.75 pounds
See On Amazon #14
SPARKWHIZ Jerry Gas Can Holder, 5 Gallon / 20 Liter Steel Jerry Can Mount Brackets
Asin: B09N3NYYCJ | Model: 11029001YA | PartNumber: 11029001YA | Ean: 0720721666131 | UPC: 720721666131
Adventure-Ready : Sturdy And Space-Saving Design Makes It Perfect For Your Next Adventure..
Perfect Fit : Holds 20L Steel Jerry Gas Can. Will Not Work With Scepter Style Cans..
Note: Ensure The Top Bracket Is Correctly Oriented; Otherwise, The Retention Band Won't Fit..
Built To Last : Black Powder Coating Presents Excellent Performance, Against Rust & Corrosion For Longer Service Life..
Secure Locking : Protect Your Fuel With A Lockable Top Strap. Add Your Own Padlock For Peace Of Mind..
Features
- Versatile Mounting : Screw holes pre-drilled on brackets' bottom and sides, add screws as needed for installation according to your mounting position.
- Secure Locking : Protect your fuel with a lockable top strap. Add your own padlock for peace of mind.
- Adventure-Ready : Sturdy and space-saving design makes it perfect for your next adventure.
- Built to Last : Black powder coating presents excellent performance, against rust & corrosion for longer service life.
- Perfect Fit : Holds 20L steel Jerry gas can. Will not work with Scepter style cans.
- NOTE: Ensure the top bracket is correctly oriented; otherwise, the retention band won't fit.
- See more on Amazon...
Brand: SPARKWHIZ
Dimensions: 18.31 x 14.17 x 0.01 inches
See On Amazon #15
Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 4
Asin: B0BLTVMKJT
Push - In Vent Cap For Faster And Safer Emptying, Lanyard For Retaining The Cap To Prevent Loss.
Each Kit Includes: (1) Filler Nozzle, (1) Spout Cap With Lanyard, (1) "O" Ring Gasket, (2) Base Caps, (1) Yellow Push-In Vent Cap,(1)Black Rear Vent Cap,4 Kits Included,(1)Drill Bit Only..
Compatible With Most Of Gas Cans And 1/2/5/10 Gallon: Universal Gas Can Spout Kit Comes With Two Different Collar Screw Cap, Fine Thread And Coarse Thread Collar Cap ,Fit Most Of The Cans.
Flexible Nozzle Can Be Bent To Adjust Various Angles Make Gas/Water Easily Flows Out Without The Need For Other Devices And No More Spilling.
Features
- Fuel can spouts are made of high strength ABS plastic, improved gasket more durable and no leak
- Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling
- Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss
- Compatible with Most of gas cans and 1/2/5/10 gallon: Universal gas can spout kit comes with two different collar screw cap, fine thread and coarse thread collar cap ,fit most of the cans
- Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) O ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap,4 Kits included,(1)drill bit only.
- See more on Amazon...
Brand: WHSSFINE
See On Amazon #16
12 Pack Gas Can Spout Replacement Rubber Gaskets Can Gaskets Spout Gaskets Fuel Jug Washer Seals Sealing Rings Gaskets Compatible with Most Gas Can Spout (Round-12PCS)
Asin: B0BGDJJZSS
Perfect Replacement Gasket: When Tightening The Dispenser Back Onto The Can, You Can Start To Feel The Resistance Of The New O-Ring Long Before That Of The Old O-Ring And The New Thickness Gives You Confidence To Tighten It To Your Heart's Content..
Will It Fit My Gas Can: Remember, The Inside Seal Diameter Will Stretch Slightly To Create A Secure Fit Onto Your Gas Can Spout..
Size: Check Out The Product Photos For Product Dimensions To Compare To Your Existing Gasket/Gas Can Spout To Quickly Bring Your Gas Can Back To Its New Condition..
Materials: High Quality Rubber Last For Years, Which Is Durable And Sturdy, Non-Rusting, Corrosion-Resistant, Flexible And Not Easy To Break Or Split, Easy To Install And Use..
Features
- Package: You will receive 12 piece of gas cans spout gaskets. Note: Gas Can and Spout Not Included. Gas cans spout gaskets fits most standard plastic jerry can spouts.
- Materials: High Quality Rubber last for years, which is durable and sturdy, non-rusting, corrosion-resistant, flexible and not easy to break or split, easy to install and use.
- Perfect replacement gasket: When tightening the dispenser back onto the can, you can start to feel the resistance of the new o-ring long before that of the old o-ring and the new thickness gives you confidence to tighten it to your heart's content.
- Size: Check out the product photos for product dimensions to compare to your existing gasket/gas can spout to quickly bring your gas can back to its new condition.
- Will it fit my gas can: Remember, the inside seal diameter will stretch slightly to create a secure fit onto your gas can spout.
- See more on Amazon...
Brand: XY North | Manufacturer: XY North
See On Amazon #17
Jerry Can Gaskets 5 Pack
Asin: B00XWUS0O8
Brand: un branded
Weight: 0.18 Pounds
See On Amazon #18
Frienda Gas Can Spout Gaskets Rubber Ring Can Gaskets Fuel Washer Seals Spout Gasket Sealing Rings Replacement Gas Gaskets Compatible with Most Gas Can Spout (10 Pieces)
Asin: B08PVJT8BJ
Suitable Dimension: The Size Of The Fuel Washer Seals Measures Approx. 3.8 Cm/ 1.5 Inch In Outer Diameter And 3 Cm/ 1.18 Inch In Inner Diameter, Please Confirm The Measurement Before Your Buying.
Easy To Carry And Store: The Replacement Gas Gaskets Are Convenient For You To Store Or Carry In A Plastic Storage Box, Toolbox, Backpack, Pocket And So On, And They Will Not Occupy Too Much Space In Your Cabinet When They Are Not In Use.
Good Compatibility: The Spout Gasket Sealing Rings Are Compatible With Most Can Spouts, You Do Not Need To Change The Type Of Gasket Sealing Rings When Using Different Can Spouts, Providing Convenience For You When Applying Them.
Adequate Amount: You Will Receive Several Pieces Of Can Spout Gaskets In The Package, Which Are Sufficient To Satisfy Your Daily Application And Replacement, You Can Also Send Them To Your Farther, Boyfriend And Neighbors Who Need Them.
Features
- Long service time: the rubber ring can gaskets are made of tensile rubber material, durable and sturdy, not wear or tear, rust and corrosion resistant, flexible and not easy to break or split, supporting a long time service period
- Adequate amount: you will receive several pieces of can spout gaskets in the package, which are sufficient to satisfy your daily application and replacement, you can also send them to your farther, boyfriend and neighbors who need them
- Suitable dimension: the size of the fuel washer seals measures approx. 3.8 cm/ 1.5 inch in outer diameter and 3 cm/ 1.18 inch in inner diameter, please confirm the measurement before your buying
- Good compatibility: the spout gasket sealing rings are compatible with most can spouts, you do not need to change the type of gasket sealing rings when using different can spouts, providing convenience for you when applying them
- Easy to carry and store: the replacement gas gaskets are convenient for you to store or carry in a plastic storage box, toolbox, backpack, pocket and so on, and they will not occupy too much space in your cabinet when they are not in use
- See more on Amazon...
Brand: Frienda | Manufacturer: Frienda
See On Amazon #19
VP Racing Fuels 3043B Replacement O-Ring for VP Racing Fuels 3042 Jug Caps, 5 Pack
Asin: B08M99HVWB
Brand: VP Racing | Manufacturer: Plastic Product Formers
See On Amazon #20
Gas Can Spout Replacement,Gas Can Nozzle,(3 Kit-Yellow) with 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread-Fits Most of The Cans) Gas can
Asin: B0CCMG79NF
Anti-Overflow Design, (Special Attention: As Shown In The Figure, The Screw Cap Of The Gas Can Spout Cap Is Hexagonal) The Spout Tube And The Spout Cap Are Threaded, And The Spout Cap Has A Rubber Sealing Ring Inside. Tighten The Spout Cap After Use. There Will Be No Oil Overflow Even In The Case Of Transportation Or The Tank Is Down.
Easy To Use. Each Set Of Products Includes, 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread) 3 Yellow Spouts And Rubber Gaskets, 3 Nozzle Caps With Threads, 2 Kinds Of Gas Can Vent Caps And 1 Drill Bit. After-Sales Service: We Ensure That Our New Gas Can Spout Replacement Kit Will Meet Everyone High-Quality Requirements. But For Any Reason You Are Not Fully Satisfied, Please Be Free To Contact Us, Our Team Will Be Happy To Service You..
Two Types Of Vent Caps, One Of The Vent Caps Is Used For Oil Cans Without A Vent At The End Of The Oil Can, Another Is Used For Another Oil Can With A Vent Cap At The Tail, Easy To Install, Please Feel Free To Contact Us For Installation Problems, We Will Solve It For You As Soon As Possible..
These Pesuitor Gas Can Spout Kits Are Made Of High Quality Hdpe Material. Molded In One Piece, No Steps For Secondary Connections. Bend Freely Without Breaking. With Thickened And Widened Rubber Sealing Gaskets Can Fit Perfectly With The Cap And Prevent Liquid Leakage When Transporting Or When The Can Is Down..
Features
- Gas Can Spout Replacement, Pesuitor upgraded gas can spout kit is more compatible and the length of the hose is longer. Suitable for most 1/2/5/10 gal oil cans. Oil jug mouth sizes from 1.7in-1.82in both can be used. The total length of the hose is 8.1in, which is more convenient and flexible to use. Please measure your oil cans mouth size before purchasing
- These PESUITOR Gas Can Spout Kits are made of high quality HDPE material. Molded in one piece, no steps for secondary connections. Bend freely without breaking. With thickened and widened rubber sealing gaskets can fit perfectly with the cap and prevent liquid leakage when transporting or when the can is down.
- Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down
- Two Types of Vent Caps, One of the vent caps is used for oil cans without a vent at the end of the oil can, another is used for another oil can with a vent cap at the tail, easy to install, Please feel free to contact us for installation problems, we will solve it for you as soon as possible.
- Easy To Use. Each set of products includes, 6 Screw Collar Caps(3 Coarse Thread &3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas can vent caps and 1 drill bit. After-sales Service: We ensure that our new gas can spout replacement kit will meet everyone high-quality requirements. But for any reason you are not fully satisfied, please be free to contact us, our team will be happy to service you.
- See more on Amazon...
Brand: PESUITOR
See On Amazon
Looking For Something Else?
Search