simimasen Adhesive Dispensers Glue Dispenser Machine Automatic Glue Dispenser 982 Pneumatic Dispensing Machine Semi Automatic Glue Dropper Dispenser Precise Splicing Dispensing Controller 0.01ml
Asin: B0CRYZN4YQ | Model: TUSYJ8-7148 | PartNumber: TUSYJ8-7148
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.👍Precise Drip: The Minimum Drip Volume Is 0.01Ml, And The Spitting Interval Is 0.1-9.9S. It Can Drip Precisely And Achieve A Repeat Accuracy Of About 0.5%. It Is Also Equipped With A Single-Hole Hand Control Switch, Allowing You To Control It Personally By Hand For More Accuracy And Timeliness..
👍Quick Start: This Item Adopts A High-Quality Electronic Valve, Which Can Instantly Start The Diaphragm Valve And Increase The Working Efficiency By More Than 80%..
👍Vacuum Back Suction: This Semi-Automatic Glue Dispenser Machine Is Equipped With A Vacuum Back Suction Device, Which Can Effectively Prevent The Glue From Dripping During Use To Achieve A More Accurate Glue Dripping, And Ensure A Clean And Tidy Working Environment..
👍Semi-Automatic Design: It Can Be Both Automatically Dripped By The Machine And Precisely Controlled By A Single-Hole Hand Switch. If You Want To Free Your Hands, You Can Set The Switch To The Automatic Position, To Achieve A More Efficient And Higher-Quality Working Method..
Features
- STABLE VOLTAGE CHANGE: Features a high-end all-copper coil transformer, which can stabilize the voltage change and increase the service life, and can be used in high-frequency and high-intensity work scenarios, improving operational safety while being efficient and energy-saving. High-precision Air Pressure Gauge, The high-precision air pressure gauge can precisely control the air pressure input to the air pump and convert the air pressure precisely to ensure that the air tube will not break.
- SEMI-AUTOMATIC DESIGN: It can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. If you want to free your hands, you can set the switch to the automatic position, to achieve a more efficient and higher-quality working method.
- PRECISE DRIP: The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. It can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness.
- VACUUM BACK SUCTION: This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively prevent the glue from dripping during use to achieve a more accurate glue dripping, and ensure a clean and tidy working environment.
- QUICK START: This item adopts a high-quality electronic valve, which can instantly start the diaphragm valve and increase the working efficiency by more than 80%.
- See more on Amazon...
Brand: simimasen | Manufacturer: simimasen
See On Amazon Similar To simimasen Adhesive Dispensers Glue Dispenser
#1
FastCap 6oz Glue Bottle, with 2-Chamber No-Drip System. Each Bottle Comes with 2 Replaceable Tips. (Pack of 2 Bottles)
Asin: B0B662G3QD | Model: FC-HighBot-Pack | PartNumber: FC-HighBot-Pack
This Same Design Allows The Glue Bottle To Be The First Glue Bottle To Make Vertical Application Easy And Without Drips..
Each Bottle Comes With: 1 - Yorker Tip For A Clean, Thin Glue Line. 1 - Blade Tip – For A Clean, Wide Glue Line..
Glue Level Remains High Even When The Bottle Is Running Low. Wide Opening Allows You To Easily Refill The Glue. Wide Bottom For Extra Stability.
The Easy-Squeeze Bottle Features A Unique Two-Chamber Design That Pulls The Glue Back After Squeezing To Eliminate Dripping And Leaves A Clean, Clog Free Tip..
Features
- Designed with a 2-chamber system that feeds the glue from the bottom up through the secondary side chamber, which ensures fresh glue every time
- The Easy-Squeeze Bottle Features a Unique Two-Chamber Design That Pulls the Glue Back After Squeezing to Eliminate Dripping and leaves a clean, clog free tip.
- This Same Design Allows the Glue Bottle to Be the First Glue Bottle to Make Vertical Application Easy and Without Drips.
- Glue Level Remains High Even When the Bottle Is Running Low. Wide opening allows you to easily Refill the glue. Wide bottom for extra stability
- Each Bottle Comes with: 1 - Yorker tip for a clean, thin glue line. 1 - Blade Tip For a clean, wide glue line.
- See more on Amazon...
Brand: FastCap | Manufacturer: FastCap
Dimensions: 6.25 x 2.75 x 1.90 inches
See On Amazon #2
Automatic Shoe Cover Dispenser Disposable Plastic Shoe Covers Shoe Wrapping Machine Smart Shoe Film Machine Floor Guard Shoe Cover With 3 Roll Shoe Film
Asin: B0CGZHWQMW
👞 Pull Out The Shoe Film And Lay It Flat On The Sponge Pad Of The Shoe Molding Machine. Note: The Shoe Mold Has The Glue-Adhesive Side Up, And The Non-Sticky Side Is Attached To The Sponge Pad, So That It Will Stick To The Sole. Cover The Noodle Cover..
👞 Shoe Toe Should Be Pressed Against The Machine And Stepped On Slightly, The Shoe Film Is Cut..
👞 First, Use One Foot To Step On The Paved Shoe Film Slightly, And Pull The Foot With The Shoe Film Back All The Way To The Black Shoe Plate At The Back (Note That It Is Not Too Long To Avoid Cutting The Sleeve)..
👞 Pick Up A Roll Of Shoe Film And Align The Small Shafts On Both Sides Of The Shoe Film With The Slots On Both Sides Of The Machine (Put Into The Card Slot On Both Sides)..
Features
- Lift the cover and put it aside.
- Pick up a roll of shoe film and align the small shafts on both sides of the shoe film with the slots on both sides of the machine (Put into the card slot on both sides).
- Pull out the shoe film and lay it flat on the sponge pad of the shoe molding machine. Note: The shoe mold has the glue-adhesive side up, and the non-sticky side is attached to the sponge pad, so that it will stick to the sole. Cover the noodle cover.
- First, use one foot to step on the paved shoe film slightly, and pull the foot with the shoe film back all the way to the black shoe plate at the back (note that it is not too long to avoid cutting the sleeve).
- Shoe toe should be pressed against the machine and stepped on slightly, the shoe film is cut.
- See more on Amazon...
Brand: simimasen | Manufacturer: simimasen
See On Amazon
Looking For Something Else?
Search