#icpart Digital Load Cell Weight Sensor 1kg 5kg 10kg 20KG Portable Electronic Kitchen Scale + HX711 Weighing Sensors Ad Module - (Color: 20KG) #icpart248929
Asin: B0CSDF7BC9
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Package Included: 1 Set Only. Type: Voltage Regulator.
Features
- You are Choosing: Color: 20KG . Please check all carefully (photos and model) and make sure it will compatible with your original one. Model Number: MW
- Package included: 1 Set ONLY. Type: Voltage Regulator
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon Similar To icpart Digital Load Cell Weight
#1
2 Sets 50kg Human Scale Load Cell Weighing Sensor Resistance Strain Half-Bridge Sensor + HX711 A/D Amplifier Weight Module DIY Kit for Arduino
Asin: B097T3SX6W | Model: S02X8+S19X2 | PartNumber: S02X8+S19X2 | Ean: 0736140514779 | UPC: 736140514779
★Use One Load Sensor 50Kg With An External Resistor To Form A Full-Bridge Measurement, The Range Of A Sensor Range: 50Kg. External Resistance On The Higher Requirements..
★Use Four Weight Scale 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of Four Sensors: 50Kgx4 = 200Kg.
★Use Two Weight Sensor 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of The Two Sensors: 50Kgx2 = 100Kg.
★The Load Sensor Is A Group Of Half-Bridge Strain Gauge, There Are 3 Ways To Use It..
Features
- This module uses 24 high precision A/D converter chip hx711, specially designed for the high precision electronic scale
- The load sensor is a group of half-bridge strain gauge, there are 3 ways to use it.
- Use one load sensor 50kg with an external resistor to form a full-bridge measurement, the range of a sensor range: 50kg. External resistance on the higher requirements.
- Use two weight sensor 50kg to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2 = 100kg
- Use four weight scale 50kg to form a full-bridge measurement, measuring range for the sum of four sensors: 50kgx4 = 200kg
- See more on Amazon...
Brand: NC | Manufacturer: ShangHJ
Weight: 0.22 pounds
See On Amazon #2
4pcs 50kg Load Cell Half Bridge Strain Gauge Human Body Scale Weight Sensor + 1pcs HX711 Amplifier AD Module for Arduino
Asin: B07B4DNJ2L | Model: 8541791593 | PartNumber: 8541791593 | Ean: 0747356634304, 0702795764555 | UPC: 702795764555, 747356634304
Use Two Weight Sensor 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of The Two Sensors: 50Kgx2 = 100Kg.
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Use Four Weight Scale 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of Four Sensors: 50Kgx4 = 200Kg.
Use One Load Sensor 50Kg With An External Resistor To Form A Full-Bridge Measurement, The Range Of A Sensor Range: 50Kg. External Resistance On The Higher Requirements..
Features
- The 50kg load cell is a group of half-bridge strain gauge, there are 3 ways to use it. 2.Use two sensors to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2 = 100kg
- Use one load sensor 50kg with an external resistor to form a full-bridge measurement, the range of a sensor range: 50kg. External resistance on the higher requirements.
- Use two weight sensor 50kg to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2 = 100kg
- Use four weight scale 50kg to form a full-bridge measurement, measuring range for the sum of four sensors: 50kgx4 = 200kg
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: NEXTION | Manufacturer: NEXTION
Dimensions: 0.70 x 1.50 x 1.00 Inches | Weight: 0.17 pounds
See On Amazon #3
2 Sets Digital Load Cell Weight Sensor + HX711 ADC Module Weighing Sensor for Arduino DIY Portable Electronic Kitchen Scale Kit (5kg, HX711)
Asin: B09K7G3477 | Model: S21X2+S19X2 | PartNumber: S21X2+S19X2 | Ean: 0736140515004 | UPC: 736140515004
✅Load Cell: 4 Leads, Easy To Use, Plus 5-10V Drive Voltage, Direct Output As A Voltage Signal Due To Force Changes. Works For Arduino And Raspberry Pi.
✅This Hx711 Module Uses 24 High Precision A/D Converter Chip Hx711. It Is A Specially Designed For The High Precision Electronic Scale Designwith Two Analog Input Channelthe Internal Integration Of 128 Times The Programmable Gain Amplifier.
✅The Hx711 On-Chip Active Low Noise Pga With Selectable Gain Of 3264 And 128.
✅You Need To Connect Load Cell With Hx711 Module Like This, Red To E+, Black To E-, Green To A+, White To A-.
Features
- The Load Cell maximum measures force: 5kg (11lb)
- You need to connect load cell with HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
- Load Cell: 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Works for arduino and raspberry pi
- The HX711 On-chip active low noise PGA with selectable gain of 3264 and 128
- This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier
- See more on Amazon...
Brand: NC | Manufacturer: ShangHJ
Weight: 0.22 Pounds
See On Amazon #4
DIYmalls 4pcs Load Cell 50kg Half Bridge Strain Gauge Human Body Digital Scale Weight Sensor + 1pc HX711 Amplifier AD Module for Arduino
Asin: B086ZHXNJH | Ean: 0747356634304 | UPC: 747356634304
Use Two Weight Sensor 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of The Two Sensors: 50Kgx2 = 100Kg.
If You Have Any Problem, Please Do As Follow: Click "Diymalls"(You Can Find "Sold By Diymalls" Under Buy Now Button), In The New Page, Click "Ask A Question"..
Use Four Weight Scale 50Kg To Form A Full-Bridge Measurement, Measuring Range For The Sum Of Four Sensors: 50Kgx4 = 200Kg.
Use One Load Sensor 50Kg With An External Resistor To Form A Full-Bridge Measurement, The Range Of A Sensor Range: 50Kg. External Resistance On The Higher Requirements..
Features
- The 50kg load cell is a group of half-bridge strain gauge, there are 3 ways to use it. 2.Use two sensors to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2 = 100kg
- Use one load sensor 50kg with an external resistor to form a full-bridge measurement, the range of a sensor range: 50kg. External resistance on the higher requirements.
- Use two weight sensor 50kg to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2 = 100kg
- Use four weight scale 50kg to form a full-bridge measurement, measuring range for the sum of four sensors: 50kgx4 = 200kg
- If you have any problem, please do as follow: click DIYmalls(you can find Sold by DIYmalls under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Dimensions: 0.70 x 1.00 x 1.50 inches | Weight: 0.18 Pounds
See On Amazon #5
Digital Load Cell Weight Sensor - 4 Sets 1KG Load Cell HX711 AD Weighit Amplifier Module Pressure Sensor Ar duino Load Cell Amplifier HX711 AD Converter Breakout Module for Ar duino Scale
Asin: B0BG59SWLZ
The Hx711 Module Adopts A 24-Bit High-Precision A/D Conversion Chip Hx711; Hx711 Is An Internal Integrated 128-Fold Programmable Gain Amplifier With Two Analog Input Channels Designed For High-Precision Electronic Scales.
"Simple Digital Control And Serial Interface: Pin Drive Control, No Programming Required, Selectable 10Sps Or 80Sps Output Data Rate. 6. Load Cell - Rugged Aluminum Alloy Construction With Strain".
Precautions: One End Of The Sensor Is Fixed Through The Screw Hole, And The Other End Is Kept In A Suspended State, And Gravity Is Applied In The Direction Indicated By The Label. Special Attention Must Be Paid Not To Directly Press The White Glue-Coated Part, So As Not To Damage The Sensor.
Wiring Method: Power Positive (E+) Red, Power Negative (E-) Black, Signal Positive (S+) Green, Signal Negative (S-) White.
Features
- Simple operation: the maximum measuring force of the load cell: 1kg (2.2lb), four leads, easy to use, add 5-10V driving voltage, the force change is directly output as a voltage signal
- Wiring method: power positive (E+) red, power negative (E-) black, signal positive (S+) green, signal negative (S-) white
- The HX711 module adopts a 24-bit high-precision A/D conversion chip hx711; HX711 is an internal integrated 128-fold programmable gain amplifier with two analog input channels designed for high-precision electronic scales
- Precautions: One end of the sensor is fixed through the screw hole, and the other end is kept in a suspended state, and gravity is applied in the direction indicated by the label. Special attention must be paid not to directly press the white glue-coated part, so as not to damage the sensor
- Simple digital control and serial interface: pin drive control, no programming required, selectable 10SPS or 80SPS output data rate. 6. LOAD CELL - Rugged aluminum alloy construction with strain
- See more on Amazon...
Brand: MakerHawk | Manufacturer: MakerHawk
See On Amazon #6
WWZMDiB 1KG/5KG/10KG/20KG Load Cell Amplifier+HX711 24-Bit ADC Weighing Sensor Module Used to Measure Force, Pressure, Displacement, Strain, Torque, Acceleration. (1KG)
Asin: B0BLNR4S1P | Model: HX711 | PartNumber: HX711 | Ean: 0618202521119 | UPC: 618202521119
🥇This Module Uses 24 High Precision A/D Converter Chip Hx711..
🥉Support Widely Used In Aerospace, Mechanical, Electrical, Chemical, Construction, Medicine And Many Other Fields.
🥈The Hx711 Uses A Two Wire Interface (Clock And Data) For Communication. Any Microcontroller’S Gpio Pins Should Work And Numerous Libraries Have Been Written Making It Easy To Read Data From The Hx711..
⚡【Voltage】：2.6 ~ 5.5V.
Features
- HX711 Weighing Sensor Module+1KG/5KG/10KG/20KG Load Cell Amplifier : used to measure force, pressure, displacement, strain, torque, acceleration.
- Voltage 2.6 ~ 5.5V
- This module uses 24 high precision A/D converter chip hx711.
- The HX711 uses a two wire interface (Clock and Data) for communication. Any microcontroller s GPIO pins should work and numerous libraries have been written making it easy to read data from the HX711.
- Support Widely used in aerospace, mechanical, electrical, chemical, construction, medicine and many other fields
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
Dimensions: 0.04 x 0.04 x 0.04 Inches
See On Amazon #7
Wishiot 2PCS Digital Load Cell Weight Sensor 1kg 5kg 10kg 20kg High Precision Miniature Load Cells for Arduino DIY Electronic Portable Kitchen Scale Sensors (2pcs 10kg)
Asin: B0C3QJ8J59 | Model: FZ1878X2 | PartNumber: FZ1878X2
Four Leads, Easy To Use,5-10V Drive Voltage Applied, The Force Is Directly Output As A Voltage Change Signal..
You Will Get 2Pcs Load Cell Weight Sensor. Please Feel Free To Ask Any Questions You May Have And Will Respond Within 24 Hours..
Made Of High Quality Aluminium Alloy, Parallel Beam Structure, Suitable For Electronic Kitchen Scales, Small Appliances Force Measurement, Pet Feeders And Other Intelligent Weighing Equipment..
Connection：Red To E+ / Black To E- / Green To A+ / White To A-.
Features
- Weight options: 1kg 5kg 10kg 20kg
- Connection Red to E+ / Black to E- / Green to A+ / White to A-
- Four leads, easy to use,5-10V drive voltage applied, the force is directly output as a voltage change signal.
- Made of high quality aluminium alloy, parallel beam structure, suitable for electronic kitchen scales, small appliances force measurement, pet feeders and other intelligent weighing equipment.
- You will get 2pcs load cell weight sensor. Please feel free to ask any questions you may have and will respond within 24 hours.
- See more on Amazon...
Brand: Wishiot | Manufacturer: Wishiot
See On Amazon #8
100g Load Cell 100g Load Sensor 100g Micro Load Cell 100g Weight Sensor Digital Load Cell Module Electronic Components hx711 Load Cell Amplifier Load Cell 100g Load Cell 500g
Asin: B0C9LDHFPK | Model: Ymiko4d6w2zqiky | PartNumber: Ymiko4d6w2zqiky
High Quality The Load Cell Is Made Of Aluminum Alloy, It Is Sturdy, Stable And Has Long Serving Life..
Special Product: The Magical And Beloved Product Ensures That It Is What You Currently Need. When You Encounter This Magical Product, Your Fate Is Already Predetermined. Take This Fate Product Home And Reduce Your Worries!.
High Accuracy, Small Comprehensive Error, Stable And Durable Performance.Advanced Chip. Clear Sound And Perfect Quality, Strong Bass. 4.2 Wireless Transmission, Wide Working Distance..
High Accuracy, Small Comprehensive Error, Stable And Durable Performance. High Quality The Load Cell Is Made Of Aluminum Alloy, It Is Sturdy, Stable And Has Long Serving Life..
Features
- SUPER PERFORMANCE -- High accuracy, small comprehensive error, stable and durable performance.Sensor Blocks
- High accuracy, small comprehensive error, stable and durable performance. High Quality The load cell is made of aluminum alloy, it is sturdy, stable and has long serving life.
- High Quality The load cell is made of aluminum alloy, it is sturdy, stable and has long serving life.
- High accuracy, small comprehensive error, stable and durable performance.Advanced chip. Clear sound and perfect quality, strong bass. 4.2 wireless transmission, wide working distance.
- Special product: The magical and beloved product ensures that it is what you currently need. When you encounter this magical product, your fate is already predetermined. Take this fate product home and reduce your worries!
- See more on Amazon...
Brand: Ymiko | Manufacturer: Ymiko
See On Amazon #9
EC Buying HX711 Digital Load Cell Module, Weight Sensor A/D Module with Display 24 Bit Weighing Scale Smart Arduino Load Cell Arduino Display/for Arduino
Asin: B09Z29TK7J | Model: HX711 | PartNumber: HX711
★Temperature Coefficient: ≤100Ppm/℃, ★A/D Conversion Rate: 6.25～100Hz★Measurement Signal Range: ±19Mv.
★Using Temperature Range: -40℃～+70℃; ★Storage Temperature Range: -60℃～+90℃.
★Comprehensive Protection Function: It Has Multiple Protections Such As Anti-Reverse Connection, Anti-Overvoltage, Instantaneous Suppression, Etc..
★Small Size, Engineers Can Carry It With Them, Support Micro Android Interface For Power Supply, ★Built-In Hx711 Chip For Easy On-Site Debugging, ★Send Data Regularly, Or When The Weight Changes.
Features
- Load cell display instrument has the advantages of strong anti-interference ability, powerful function, easy operation, strong versatility, small temperature drift and high linearity, and is suitable for other measurement occasions such as weighing and mechanical strength testing.
- Small size, engineers can carry it with them, support Micro Android interface for power supply, Built-in HX711 chip for easy on-site debugging, Send data regularly, or when the weight changes
- Temperature coefficient: 100ppm/ , A/D conversion rate: 6.25 100Hz Measurement signal range: 19mV
- Comprehensive protection function: It has multiple protections such as anti-reverse connection, anti-overvoltage, instantaneous suppression, etc.
- Using temperature range: -40 +70 ; Storage temperature range: -60 +90
- See more on Amazon...
Brand: EC Buying | Manufacturer: EC Buying
Dimensions: 0.47 x 2.16 x 1.38 Inches | Weight: 0.03 pounds
See On Amazon #10
Load Cell Amplifier - HX711
Asin: B00NPZ4CPG | Model: SEN-13879 | PartNumber: SEN-13879 | Ean: 0602401874688, 6955900326450, 7431904726742, 0717520030058 | UPC: 717520030058, 602401874688
Simultaneous 50 And 60Hz Supply Rejection.
Model Number: Sen-13879.
Selectable 10Sps Or 80Sps Output Data Rate.
Features
- Operation Voltage: 2.7V-5V, Operation Current: < 1.5mA
- Selectable 10SPS or 80SPS output data rate
- Simultaneous 50 and 60Hz supply rejection
- Model number: SEN-13879
- See more on Amazon...
First Available: 11/04/2016
Brand: SparkFun | Manufacturer: Cool Components
Dimensions: 0.20 x 1.18 x 0.91 Inches | Weight: 0.02 pounds
See On Amazon #11
ShangHJ 5KG Portable Electronic Kitchen Scale Digital Load Cell Weight Sensor + AD HX711 Weighing Pressure Module for Arduino
Asin: B0995TSYSD | Model: S21+S19 | PartNumber: S21+S19 | Ean: 0736140514793 | UPC: 736140514793
✅Load Cell: 4 Leads, Easy To Use, Plus 5-10V Drive Voltage, Direct Output As A Voltage Signal Due To Force Changes. Works For Arduino And Raspberry Pi.
✅The Hx711 On-Chip Active Low Noise Pga With Selectable Gain Of 3264 And 128.
✅This Hx711 Module Uses 24 High Precision A/D Converter Chip Hx711. It Is A Specially Designed For The High Precision Electronic Scale Designwith Two Analog Input Channelthe Internal Integration Of 128 Times The Programmable Gain Amplifier.
✅You Need To Connect Load Cell Wtih Hx711 Module Like This, Red To E+, Black To E-, Green To A+, White To A-.
Features
- The Load Cell maximum measures force: 5kg (11lb)
- You need to connect load cell wtih HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
- Load Cell: 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Works for arduino and raspberry pi
- This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier
- The HX711 On-chip active low noise PGA with selectable gain of 3264 and 128
- See more on Amazon...
Brand: NC | Manufacturer: ShangHJ
See On Amazon #12
Geekstory 4pcs 50kg Load Cell Half Bridge Strain Gauge Human Body Scale Digital Weighting Sensor + 1pc HX711 AD Amplifier Weight Module for Arduino
Asin: B079FTXR7Y | Model: FZ1802AX4+FZ0728 | PartNumber: FZ1802AX4+FZ0728 | Ean: 0702795764395 | UPC: 702795764395
This Module Uses 24 High Precision A/D Converter Chip Hx711, Specially Designed For The High Precision Electronic Scale.
If You Need Technical Documentation, Please Click “Geekstory‘’To Em-Ail Us.
You Will Receive 4Pcs 50Kg Half-Bridge Load Cell + 1Pc Hx711 Ad Weight Module.
The Sensor Is A Group Of Half-Bridge Strain Gauge, There Are 3 Ways To Use It.
Features
- This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales
- The sensor is a group of half-bridge strain gauge, there are 3 ways to use it
- This module uses 24 high precision A/D converter chip hx711, specially designed for the high precision electronic scale
- You will receive 4pcs 50kg Half-bridge Load Cell + 1pc HX711 AD Weight Module
- If you need technical documentation, please click Geekstory to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Weight: 0.18 pounds
See On Amazon #13
20kg Load Cell Weight Sensor Electronic Kitchen Scale + HX711 AD Weighing Module Geekstory
Asin: B079FQNJJH | Model: FZ0728+FZ1439 | PartNumber: FZ0728+FZ1439 | Ean: 0702795764401 | UPC: 702795764401
On-Chip Active Low Noise Pga With Selectable Gain Of 3264 And 128.
If You Need Technical Documentation, Please Click “Geekstory” To Em-Ail Us.
Simple Digital Control And Serial Interface: Pin-Driven Controlsno Programming Needed.
You Need To Connect Load Cell Wtih Hx711 Module Like This, Red To E+, Black To E-, Green To A+, White To A-.
Features
- This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier.
- You need to connect load cell wtih HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
- On-chip active low noise PGA with selectable gain of 3264 and 128
- Simple digital control and serial interface: pin-driven controlsno programming needed
- If you need technical documentation, please click Geekstory to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #14
Geekstory 20kg Digital Load Cell Weight Sensor HX711 AD Converter Breakout Module Weight Sensor Module Kit DIY Portable Electronic Kitchen Scale for Arduino Raspberry Pi
Asin: B0B6NRW8GG | Model: No | PartNumber: No
You Can Get: 1 X 20Kg Load Cell; 1 X Hx711 Ad Module; 1 X Dupont Cable Set; 1 X Acrylic Disc; 5 X Nylon Guide Column; 2 X M3 *10 Screws.
If You Need Technical Documentation, Please Click “Ask A Question”.
On-Chip Active Low Noise Pga With Selectable Gain Of 3264 And 128.
You Need To Connect Load Cell Wtih Hx711 Module Like This, Red To E+, Black To E-, Green To A+, White To A-.
Features
- This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier.
- You need to connect load cell wtih HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
- You can get: 1 X 20KG Load Cell; 1 X HX711 AD Module; 1 X Dupont Cable Set; 1 X Acrylic Disc; 5 X Nylon Guide Column; 2 X M3 *10 Screws
- On-chip active low noise PGA with selectable gain of 3264 and 128
- If you need technical documentation, Please click Ask a question
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #15
Geekstory Digital Load Cell Weight Sensor 20kg High Precision Miniature Load Cells YZC-133 for Arduino DIY Electronic Portable Kitchen Scale Sensors(Pack of 2)
Asin: B0CDB91WF6
You Need To Connect Load Cell Wtih Hx711 Module Like This, Red To E+, Black To E-, Green To A+, White To A-.
If You Have Any Questions About This Product, Or Need Additional Weight Sensors And Hx711 Modules, Please Visit "Geekstory"..
You Will Get 2Pcs 20Kg Load Cell Weight Sensor. Dimensions: 12.7Mm * 12.7Mm * 80Mm.
5-10V Drive Voltage Applied, The Force Is Directly Output As A Voltage Change Signal..
Features
- Made of high quality aluminium alloy, parallel beam structure, suitable for electronic kitchen scales, small appliances force measurement, pet feeders and other intelligent weighing equipment.
- 5-10V drive voltage applied, the force is directly output as a voltage change signal.
- You need to connect load cell wtih HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
- You will get 2pcs 20kg load cell weight sensor. Dimensions: 12.7mm * 12.7mm * 80mm
- If you have any questions about this product, or need additional weight sensors and HX711 modules, please visit Geekstory.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #16
NOYITO 1kg 5kg 10kg 20kg Load Cell and HX711 Combo Pack Kit - Load Cell Amplifier ADC Weight Sensor (1kg+HX711)
Asin: B07BGRDKG5 | Model: NOLCDHX711-1 | PartNumber: NOLCDHX711-1 | Ean: 0667797749750, 0667797748081 | UPC: 667797749750, 667797748081
Load Cell Specs: 22 Cm (8.5 In) Wire Leads Pre-Attached. Dimensions 13.5Mm High, 13.5Mm Wide, 76Mm Long (0.5 In X 0.5 In X 3.15 In). 4 Mounting Holes, 15 Mm Spacing On Each Side. One Both Holes Tapped M4 Thread, The Other Side Both Holes Tapped M5 Thread..
Please Choose The Correct Specification Before Buying. (A Total Of Four Specifications).Please Refer To The Picture On The Left Of This Page For The Product Wiring Diagram..
Hx711 Specs: Operation Voltage: 2.7V-5V ; Operation Current: < 1.5Ma ; Selectable 10Sps Or 80Sps Output Data Rate ; Includes Breakaway Headers For Connection, Soldering Required..
Hx711 :This Top Of The Line Load Cell Amplifier Mounted On A Breakout Board Pairs Perfectly With The Load Cell To Provide Fast, Accurate Force Measurements. It Measures Small Changes In The Resistance Of The Strain Gauges Mounted To The Load Cell And Passes These Values Directly To Any Micro Controller (Like An Arduino Or Raspberry Pi)..
Features
- Load cell Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-5kg/ 5kg /10kg /20kg.
- HX711 :This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any micro controller (like an Arduino or Raspberry Pi).
- Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 13.5mm high, 13.5mm wide, 76mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
- HX711 specs: Operation Voltage: 2.7V-5V ; Operation Current: < 1.5mA ; Selectable 10SPS or 80SPS output data rate ; Includes breakaway headers for connection, soldering required.
- Please choose the correct specification before buying. (A total of four specifications).Please refer to the picture on the left of this page for the product wiring diagram.
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.53 x 2.99 x 0.53 inches | Weight: 0.08 pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #17
Load Sensor, 0-100g Weighting Sensor High Electronic Load Cell for Electronic Load Cell Scale
Asin: B07WSBC3W4 | Model: Wal frontufqedm4psy | PartNumber: Wal frontufqedm4psy | Ean: 0717207759876 | UPC: 717207759876
Wide Application-- Load Sensor Can Be Widely Used In Weight Measurement, It Is Ideal For 3C Digital, Security Equipment, Household Appliances, Smahome, Measuinstruments, Automotive Electronics And Other Fields.
Easy Installation-- The Sensor Has Simple Construction And Compact Size, It Adopts Parallel Installation, Easy To Install And Use..
High Accuracy-- This Weight Sensor Features High Accuracy, Small Comprehensive Error, Accuracy: 0.020%, 0.010%, Ideal For Measuobjects With Light Weight.
High Quality-- The Digital Load Cell Module Adopts High Quality Aluminum Alloy, With High Stability And Durability, Convenient To Use.
Features
- GOOD PERFORMANCE-- Electronic load cell is anti-fatigue, anti-bias load, can withstand the pull and pressure work, limit range: 0-100g, can be used in various applications
- HIGH QUALITY-- The Digital load cell module adopts high quality aluminum alloy, with high stability and durability, convenient to use
- WIDE APPLICATION-- Load sensor can be widely used in weight measurement, it is ideal for 3C digital, security equipment, household appliances, smahome, measuinstruments, automotive electronics and other fields
- HIGH ACCURACY-- This weight sensor features high accuracy, small comprehensive error, accuracy: 0.020%, 0.010%, ideal for measuobjects with light weight
- EASY INSTALLATION-- The sensor has simple construction and compact size, it adopts parallel installation, easy to install and use.
- See more on Amazon...
Brand: Walfront | Manufacturer: Eujgoov
Dimensions: 1.18 x 3.94 x 1.18 Inches
See On Amazon #18
Weighing Sensor Transmitter Load Cell Amplifier Tension Sensor Weight Transmitter Amplifie with Multiple Protections
Asin: B086JMQ67N
Directly Connected: Weighing Tension Sensor Can Be Directly Connected With The Interface Of The Automatic Control Device Plc Single-Chip Host Computer Terminal Or Computer..
Convert Output: Weighting Sensor Converts The Mechanics And Quantity Into Standard Current And Voltage Output, Which Can Be Switched From 0~5V/0~10V..
Precisely Amplify: The Internal High-Performance Device Can Be Used To Precisely Amplify The Sensor Output , Internal Voltage Regulation, Constant Current Bridge, Voltage And Current Conversion, Impedance Matching, Linear Compensation, Humidity Compensation, Etc..
Multiple Protections: With Standard External Zero Adjustment, External Adjustment Gain Function, Input Overload Protection, Output Short Circuit Protection..
Features
- HIGH SENSITIVITY: Load cell transmitter features high accurancy, high sensitivity, high stability, and durable in use, can bring you more convenience.
- MULTIPLE PROTECTIONS: With standard external zero adjustment, external adjustment gain function, input overload protection, output short circuit protection.
- DIRECTLY CONNECTED: Weighing tension sensor can be directly connected with the interface of the automatic control device PLC single-chip host computer terminal or computer.
- PRECISELY AMPLIFY: The internal high-performance device can be used to precisely amplify the sensor output , internal voltage regulation, constant current bridge, voltage and current conversion, impedance matching, linear compensation, humidity compensation, etc.
- CONVERT OUTPUT: Weighting sensor converts the mechanics and quantity into standard current and voltage output, which can be switched from 0~5V/0~10V.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.98 x 3.23 x 1.57 inches
See On Amazon #19
DIYmalls 8pcs Load Cell 50kg Weight Sensor Half Bridge Strain Gauge Human Body Digital Scale + 2pcs HX711 Amplifier AD Module for Arduino
Asin: B09W2K13ZY
-The Weight Sensor Is A Group Of Half-Bridge Strain Gauge, There Are 3 Ways To Use It.
-You Will Receive 2Pcs Hx711 Module And 8Pcs Load Cell 50Kg.
-Hx711 Module Uses 24 High Precision A/D Converter Chip Hx711, Specially Designed For The High Precision Electronic Scale.
-This Load Sensor, Sometimes Called A Strain Gauge, Is The Same One Found In Digital Bathroom Scales.
Features
- -Simple and easy to use, with a lot of supporting libraries and information on the web. Great for anyone who wants to tinker with a digital scale setup for diy projects.
- -This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales
- -The weight sensor is a group of half-bridge strain gauge, there are 3 ways to use it
- -hx711 module uses 24 high precision A/D converter chip hx711, specially designed for the high precision electronic scale
- -You will receive 2pcs HX711 module and 8pcs load cell 50kg
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Weight: 0.00 pounds
See On Amazon #20
ShangHJ 4 Sets Digital Load Cell Weight Sensor + HX711 ADC Module Weighing Sensor for Arduino DIY Portable Electronic Kitchen Scale Kit (1kg)
Asin: B09VYTQK9G | Model: S18X4 | PartNumber: S18X4 | Ean: 0736140515257 | UPC: 736140515257
✅Load Cell: 4 Leads, Easy To Use, Plus 5-10V Drive Voltage, Direct Output As A Voltage Signal Due To Force Changes. Works For Arduino And Raspberry Pi.
✅The Hx711 On-Chip Active Low Noise Pga With Selectable Gain Of 3264 And 128.
✅This Hx711 Module Uses 24 High Precision A/D Converter Chip Hx711. It Is A Specially Designed For The High Precision Electronic Scale Designwith Two Analog Input Channelthe Internal Integration Of 128 Times The Programmable Gain Amplifier.
✅You Need To Connect Load Cell With Hx711 Module Like This, Red To E+, Black To E-, Green To A+, White To A-.
Features
- The Load Cell maximum measures force: 1kg (2.2lb)
- You need to connect load cell with HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
- Load Cell: 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Works for arduino and raspberry pi
- This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier
- The HX711 On-chip active low noise PGA with selectable gain of 3264 and 128
- See more on Amazon...
Brand: NC | Manufacturer: ShangHJ
See On Amazon
Looking For Something Else?
Search