PATIKIL Pipe Extension Joint Connector, 1pcs Free Welding AC Copper Pipe Coupling Adapter with Flare Nuts for Copper Pipe Diameter 3/8"(9.52mm) Refrigeration HVAC
Asin: B0CTDLRJ2B
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Advantage: 1. The Ac Pipe Joint Connector Is Made Of Good Brass Material, Hard Enough And Durable, Corrosion Resistant And Anti-Rust, And Has A Long Service Life. 2. The Copper Tube Coupling Adapter Is Designed To Connect Two Copper Pipes Without Welding, Can Be Tightened With A Wrench, And Is Easy And Quick To Install And Disassemble..
Note: Please Check The Size Before Purchasing..
Instruction: Put Flare Nuts On The Ends Of The Two Copper Tubes, Then Flare The Copper Tubes, Docking The Tubes With The Connector, And Finally Tighten The Nuts With A Wrench..
The Ac Pipe Joint Connector Is Mainly Used To Replace An Older Faulty Refrigerator Compressor, Docking And Extension Between Copper Pipes In Air Conditioners, Refrigerators, And Refrigeration Equipment, Also Be Applied In Fuel And Gas Systems, Plumbing, And Vacuum Applications..
Features
- Specification: Material: Brass; Color: Brass Tone; Fit for Copper Pipe Diameter: 3/8"(9.52mm or 10mm); Length: 46mm/1.81"; Hex Width: 22mm/0.87"; Package List: 1pcs x Pipe Extension Joint Connector, 2pcs x Flare Nuts
- The AC pipe joint connector is mainly used to replace an older faulty refrigerator compressor, docking and extension between copper pipes in air conditioners, refrigerators, and refrigeration equipment, also be applied in fuel and gas systems, plumbing, and vacuum applications.
- Advantage: 1. The AC pipe joint connector is made of good brass material, hard enough and durable, corrosion resistant and anti-rust, and has a long service life. 2. The copper tube coupling adapter is designed to connect two copper pipes without welding, can be tightened with a wrench, and is easy and quick to install and disassemble.
- Instruction: Put flare nuts on the ends of the two copper tubes, then flare the copper tubes, docking the tubes with the connector, and finally tighten the nuts with a wrench.
- NOTE: Please check the size before purchasing.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon Similar To PATIKIL Pipe Extension Joint Connector
#1
PATIKIL 1/8IP(1/8-27) Hex Coupling Nut, 10 Pack Female Thread Connector 25mm Hexagonal Sleeve Nut Rod Bar Stud Tube Joint Slotted Hardware for Lamp Repair DIY
Asin: B0BN5PMXC5
Instruction: Convenient To Use, Just Connect Two Threaded Tubes, No Requirement For A Tool..
Note: Please Confirm The Thread Size. 1/8Ip Thread Has A Diameter Of Approx 3/8 Inch.
Application: The Nuts Are Mainly Applied For Jointing Two Screw Pipes. Good Light Fixtures For Fastening And Extending Thread Pipes. Used On Repairing Or Replacing Chandeliers, Ceiling Lights, Or Diy Projects..
Advantage: Carbon Steel Material Can Provide A Good Hardness And Is Not Easy To Deform. Also, The Zinc Coat Has Good Rust Resistance, And It Can Prolong Product's Service Life..
Features
- Material: Carbon Steel; Thread Size: 1/8-27 (1/8IP); Hex Width: 14mm / 0.55 Inch; Height: 25mm / 0.98 Inch;
- Advantage: Carbon steel material can provide a good hardness and is not easy to deform. Also, the zinc coat has good rust resistance, and it can prolong product's service life.
- Instruction: Convenient to use, just connect two threaded tubes, no requirement for a tool.
- Application: The nuts are mainly applied for jointing two screw pipes. Good light fixtures for fastening and extending thread pipes. Used on repairing or replacing chandeliers, ceiling lights, or DIY projects.
- NOTE: Please confirm the thread size. 1/8IP thread has a diameter of approx 3/8 inch
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #2
PATIKIL 3/8" OD Brass Flare Union Connector, 3 Set Air Conditioning Copper Double Pipe Extension Joint Connectors Pipe Hose Fitting with Nut, 1.37 x 0.63inch
Asin: B0BY8SR6C6
Advantage: Made Of Brass, It Is Strong And Durable, Will Not Rust, And It‘S Easy To Replace. Very Suitable For The Connection Of Pipes. The Connection Between Two Copper Pipes, One To Two, Quick Connection, No Welding, Can Be Tightened With A Wrench..
Note: Please Confirm The Pipe Thread Size Before Purchasing.
Instruction:1.Insert The Copper Pipe With Corresponding Diameter Into Brass Nut(Not Included）.
2.Flare The Copper Pipe, Then Install And Fix The Pipe To The Brass Connector With The Spanner..
Color: Brass; Material: Brass;Thread Size: 3/8" Male Flare X 3/8" Male Flare, Suitable For Connecting 3/8"(Od) Copper Pipe.Total Size: 34.7 X 16Mm / 1.37 X 0.63Inch(L*W).
Features
- This Brass Flare Union Connector is widely used in pipe connection for air conditioning, hydraulic and pneumatic systems, HVAC, humidifier Also, the union fitting is suitable for fuel, gas system, refrigeration equipment, aluminum, steel pipe, copper tube, etc.
- Color: Brass; Material: Brass;Thread Size: 3/8 male flare x 3/8 male flare, suitable for connecting 3/8(OD) copper pipe.Total Size: 34.7 x 16mm / 1.37 x 0.63inch(L*W)
- Advantage: Made of Brass, it is strong and durable, will not rust, and it s easy to replace. Very suitable for the connection of pipes. The connection between two copper pipes, one to two, quick connection, no welding, can be tightened with a wrench.
- Instruction:1.Insert the copper pipe with corresponding diameter into brass nut(not included .
2.Flare the copper pipe, then install and fix the pipe to the brass connector with the spanner. - NOTE: Please confirm the pipe thread size before purchasing
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #3
PATIKIL Shaft Coupler Connector L22 x D14 6mm to 8mm Bore Rigid Coupling Stainless Steel Shaft Joint w Screw,Wrench for 3D Printers Silver 2Pack
Asin: B0BR2858GQ
Shaft Coupler Made Of Brass Material, Durable, Corrosion-Resistant, And Does Not Rust, Can Be Used For A Long Time.
Select The Appropriate Size According To The Motor Shaft, Remove The Old Shaft Connector From The Motor Shaft, And Then Install The New Motor Shaft Connector On The Motor Shaft..
Top Tight Type Rigid Coupling, High Torque With Rigidity, Low Inertia, And Excellent Sensitivity.No Rotation Gap And Elastic Action Can Make Up For Symmetrical Angular Misalignment..
The Rigid Coupling, We Provide Here, Are In The Size Of: Material: Stainless Steel; Color: Silver; Screws Size: M4*0.7; Bore Size: 6Mm To 8Mm/0.24Inch To 0.31Inch; Total Size: 22Mm X 14Mm/0.87Inch X 0.55Inch(L*D).
Features
- The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
- The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M4*0.7; Bore size: 6mm to 8mm/0.24inch to 0.31inch; Total Size: 22mm x 14mm/0.87inch x 0.55inch(L*D)
- Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
- Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
- Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #4
PATIKIL Pipe Extension Joint Connector Set, 2pcs Free Welding AC Copper Pipe Coupling Adapter with Flare Nuts for Copper Pipe Diameter 3/8" and 3/4" Refrigeration HVAC
Asin: B0CTDKV76Z
Advantage: 1. The Ac Pipe Joint Connector Is Made Of Good Brass Material, Hard Enough And Durable, Corrosion Resistant And Anti-Rust, And Has A Long Service Life. 2. The Copper Tube Coupling Adapter Is Designed To Connect Two Copper Pipes Without Welding, Can Be Tightened With A Wrench, And Is Easy And Quick To Install And Disassemble..
Note: Please Check The Size Before Purchasing..
Instruction: Put Flare Nuts On The Ends Of The Two Copper Tubes, Then Flare The Copper Tubes, Docking The Tubes With The Connector, And Finally Tighten The Nuts With A Wrench..
The Ac Pipe Joint Connector Is Mainly Used To Replace An Older Faulty Refrigerator Compressor, Docking And Extension Between Copper Pipes In Air Conditioners, Refrigerators, And Refrigeration Equipment, Also Be Applied In Fuel And Gas Systems, Plumbing, And Vacuum Applications..
Features
- Specification: Material: Brass; Color: Brass Tone; Fit for Copper Pipe Diameter: 3/8"(9.52mm or 10mm), 3/4"(19.05mm or 19mm); Length: 45mm/1.77", 58mm/2.28"; Hex Width: 22mm/0.87", 32mm/1.26"; Package List: 2pcs x Pipe Extension Joint Connector, 4pcs x Flare Nuts
- The AC pipe joint connector is mainly used to replace an older faulty refrigerator compressor, docking and extension between copper pipes in air conditioners, refrigerators, and refrigeration equipment, also be applied in fuel and gas systems, plumbing, and vacuum applications.
- Advantage: 1. The AC pipe joint connector is made of good brass material, hard enough and durable, corrosion resistant and anti-rust, and has a long service life. 2. The copper tube coupling adapter is designed to connect two copper pipes without welding, can be tightened with a wrench, and is easy and quick to install and disassemble.
- Instruction: Put flare nuts on the ends of the two copper tubes, then flare the copper tubes, docking the tubes with the connector, and finally tighten the nuts with a wrench.
- NOTE: Please check the size before purchasing.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #5
PATIKIL Pipe Extension Joint Connector, 2pcs Free Welding AC Copper Pipe Coupling Adapter with Flare Nuts for Copper Pipe Diameter 3/8"(9.52mm) Refrigeration HVAC
Asin: B0CTDLXK5B
Advantage: 1. The Ac Pipe Joint Connector Is Made Of Good Brass Material, Hard Enough And Durable, Corrosion Resistant And Anti-Rust, And Has A Long Service Life. 2. The Copper Tube Coupling Adapter Is Designed To Connect Two Copper Pipes Without Welding, Can Be Tightened With A Wrench, And Is Easy And Quick To Install And Disassemble..
Note: Please Check The Size Before Purchasing..
Instruction: Put Flare Nuts On The Ends Of The Two Copper Tubes, Then Flare The Copper Tubes, Docking The Tubes With The Connector, And Finally Tighten The Nuts With A Wrench..
The Ac Pipe Joint Connector Is Mainly Used To Replace An Older Faulty Refrigerator Compressor, Docking And Extension Between Copper Pipes In Air Conditioners, Refrigerators, And Refrigeration Equipment, Also Be Applied In Fuel And Gas Systems, Plumbing, And Vacuum Applications..
Features
- Specification: Material: Brass; Color: Brass Tone; Fit for Copper Pipe Diameter: 3/8"(9.52mm or 10mm); Length: 46mm/1.81"; Hex Width: 22mm/0.87"; Package List: 2pcs x Pipe Extension Joint Connector, 4pcs x Flare Nuts
- The AC pipe joint connector is mainly used to replace an older faulty refrigerator compressor, docking and extension between copper pipes in air conditioners, refrigerators, and refrigeration equipment, also be applied in fuel and gas systems, plumbing, and vacuum applications.
- Advantage: 1. The AC pipe joint connector is made of good brass material, hard enough and durable, corrosion resistant and anti-rust, and has a long service life. 2. The copper tube coupling adapter is designed to connect two copper pipes without welding, can be tightened with a wrench, and is easy and quick to install and disassemble.
- Instruction: Put flare nuts on the ends of the two copper tubes, then flare the copper tubes, docking the tubes with the connector, and finally tighten the nuts with a wrench.
- NOTE: Please check the size before purchasing.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #6
PATIKIL 1/2-18 Hex Coupling Nut, 6 Pack Female Thread Connector 30mm Hexagonal Sleeve Nut Rod Bar Stud Tube Joint Hardware for Lamp Repair DIY
Asin: B0BN5PDBM8
Instruction: Convenient To Use, Just Connect Two Threaded Tubes, No Requirement For A Tool..
Note: Please Confirm The Thread Size. 1/8Ip Thread Has A Diameter Of Approx 3/8 Inch.
Application: The Nuts Are Mainly Applied For Jointing Two Screw Pipes. Good Light Fixtures For Fastening And Extending Thread Pipes. Used On Repairing Or Replacing Chandeliers, Ceiling Lights, Or Diy Projects..
Advantage: Carbon Steel Material Can Provide A Good Hardness And Is Not Easy To Deform. Also, The Zinc Coat Has Good Rust Resistance, And It Can Prolong Product's Service Life..
Features
- Material: Carbon Steel; Thread Size: 1/2-18; Hex Width: 17mm / 0.67 Inch; Height: 30mm / 1.18 Inch;
- Advantage: Carbon steel material can provide a good hardness and is not easy to deform. Also, the zinc coat has good rust resistance, and it can prolong product's service life.
- Instruction: Convenient to use, just connect two threaded tubes, no requirement for a tool.
- Application: The nuts are mainly applied for jointing two screw pipes. Good light fixtures for fastening and extending thread pipes. Used on repairing or replacing chandeliers, ceiling lights, or DIY projects.
- NOTE: Please confirm the thread size. 1/8IP thread has a diameter of approx 3/8 inch
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #7
PATIKIL 1/4" OD Brass Flare Union Connector, 2 Set Air Conditioning Copper Double Pipe Extension Joint Connectors Pipe Hose Fitting with Nut, 1.44 x 0.43inch
Asin: B0BY8V523L | Model: pta221104tt0288 | PartNumber: pta221104tt0288
Advantage: Made Of Brass, It Is Strong And Durable, Will Not Rust, And It‘S Easy To Replace. Very Suitable For The Connection Of Pipes. The Connection Between Two Copper Pipes, One To Two, Quick Connection, No Welding, Can Be Tightened With A Wrench..
Note: Please Confirm The Pipe Thread Size Before Purchasing.
Instruction:1.Insert The Copper Pipe With Corresponding Diameter Into Brass Nut(Not Included）.
2.Flare The Copper Pipe, Then Install And Fix The Pipe To The Brass Connector With The Spanner..
Color: Brass; Material: Brass;Thread Size: 1/4" Male Flare X 1/4" Male Flare, Suitable For Connecting 1/4"(Od) Copper Pipe.Total Size: 36.7 X 11Mm / 1.44 X 0.43Inch(L*W).
Features
- This Brass Flare Union Connector is widely used in pipe connection for air conditioning, hydraulic and pneumatic systems, HVAC, humidifier Also, the union fitting is suitable for fuel, gas system, refrigeration equipment, aluminum, steel pipe, copper tube, etc.
- Color: Brass; Material: Brass;Thread Size: 1/4 male flare x 1/4 male flare, suitable for connecting 1/4(OD) copper pipe.Total Size: 36.7 x 11mm / 1.44 x 0.43inch(L*W)
- Advantage: Made of Brass, it is strong and durable, will not rust, and it s easy to replace. Very suitable for the connection of pipes. The connection between two copper pipes, one to two, quick connection, no welding, can be tightened with a wrench.
- Instruction:1.Insert the copper pipe with corresponding diameter into brass nut(not included .
2.Flare the copper pipe, then install and fix the pipe to the brass connector with the spanner. - NOTE: Please confirm the pipe thread size before purchasing
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #8
PATIKIL 5/8" OD Brass Flare Union Connector, 1 Set Air Conditioning Copper Double Pipe Extension Joint Connectors Pipe Hose Fitting with Nut, 1.64 x 0.87inch
Asin: B0BY8NNQVB | Model: pta221104tt0298 | PartNumber: pta221104tt0298
Advantage: Made Of Brass, It Is Strong And Durable, Will Not Rust, And It‘S Easy To Replace. Very Suitable For The Connection Of Pipes. The Connection Between Two Copper Pipes, One To Two, Quick Connection, No Welding, Can Be Tightened With A Wrench..
Note: Please Confirm The Pipe Thread Size Before Purchasing.
Instruction:1.Insert The Copper Pipe With Corresponding Diameter Into Brass Nut(Not Included）.
2.Flare The Copper Pipe, Then Install And Fix The Pipe To The Brass Connector With The Spanner..
Color: Brass; Material: Brass;Thread Size: 5/8" Male Flare X 5/8" Male Flare, Suitable For Connecting 5/8"(Od) Copper Pipe.Total Size: 41.7 X 22Mm / 1.64 X 0.87Inch(L*W).
Features
- This Brass Flare Union Connector is widely used in pipe connection for air conditioning, hydraulic and pneumatic systems, HVAC, humidifier Also, the union fitting is suitable for fuel, gas system, refrigeration equipment, aluminum, steel pipe, copper tube, etc.
- Color: Brass; Material: Brass;Thread Size: 5/8 male flare x 5/8 male flare, suitable for connecting 5/8(OD) copper pipe.Total Size: 41.7 x 22mm / 1.64 x 0.87inch(L*W)
- Advantage: Made of Brass, it is strong and durable, will not rust, and it s easy to replace. Very suitable for the connection of pipes. The connection between two copper pipes, one to two, quick connection, no welding, can be tightened with a wrench.
- Instruction:1.Insert the copper pipe with corresponding diameter into brass nut(not included .
2.Flare the copper pipe, then install and fix the pipe to the brass connector with the spanner. - NOTE: Please confirm the pipe thread size before purchasing
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #9
PATIKIL Shaft Coupler Connector L22 x D20 8mm to 12mm Bore Rigid Coupling Stainless Steel Shaft Joint w Screw,Wrench for 3D Printers Silver 2Pack
Asin: B0BR28K5LW
Shaft Coupler Made Of Brass Material, Durable, Corrosion-Resistant, And Does Not Rust, Can Be Used For A Long Time.
Select The Appropriate Size According To The Motor Shaft, Remove The Old Shaft Connector From The Motor Shaft, And Then Install The New Motor Shaft Connector On The Motor Shaft..
Top Tight Type Rigid Coupling, High Torque With Rigidity, Low Inertia, And Excellent Sensitivity.No Rotation Gap And Elastic Action Can Make Up For Symmetrical Angular Misalignment..
The Rigid Coupling, We Provide Here, Are In The Size Of: Material: Stainless Steel; Color: Silver; Screws Size: M5*0.8; Bore Size: 8Mm To 12Mm/0.31Inch To 0.47Inch; Total Size: 22Mm X 20Mm/0.87Inch X 0.79Inch(L*D).
Features
- The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
- The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M5*0.8; Bore size: 8mm to 12mm/0.31inch to 0.47inch; Total Size: 22mm x 20mm/0.87inch x 0.79inch(L*D)
- Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
- Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
- Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #10
PATIKIL Shaft Coupler Connector L22 x D16 5mm to 10mm Bore Rigid Coupling Brass Shaft Joint w Screw,Wrench for 3D Printers Gold 2Pack
Asin: B0BR28MYNP
Shaft Coupler Made Of Brass Material, Durable, Corrosion-Resistant, And Does Not Rust, Can Be Used For A Long Time.
Select The Appropriate Size According To The Motor Shaft, Remove The Old Shaft Connector From The Motor Shaft, And Then Install The New Motor Shaft Connector On The Motor Shaft..
Top Tight Type Rigid Coupling, High Torque With Rigidity, Low Inertia, And Excellent Sensitivity.No Rotation Gap And Elastic Action Can Make Up For Symmetrical Angular Misalignment..
The Rigid Coupling, We Provide Here, Are In The Size Of: Material: Brass; Color: Gold; Screws Size: M4*0.7; Bore Size: 5Mm To 10Mm/0.2Inch To 0.39Inch; Total Size: 22Mm X 16Mm/0.87Inch X 0.63Inch(L*D).
Features
- The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
- The rigid Coupling, we provide here, are in the size of: Material: Brass; Color: Gold; Screws Size: M4*0.7; Bore size: 5mm to 10mm/0.2inch to 0.39inch; Total Size: 22mm x 16mm/0.87inch x 0.63inch(L*D)
- Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
- Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
- Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #11
PATIKIL Shaft Coupler Connector L22 x D20 10mm to 12mm Bore Rigid Coupling Stainless Steel Shaft Joint w Screw for 3D Printers Silver 4Pack
Asin: B0BR28LCS1
Shaft Coupler Made Of Brass Material, Durable, Corrosion-Resistant, And Does Not Rust, Can Be Used For A Long Time.
Select The Appropriate Size According To The Motor Shaft, Remove The Old Shaft Connector From The Motor Shaft, And Then Install The New Motor Shaft Connector On The Motor Shaft..
Top Tight Type Rigid Coupling, High Torque With Rigidity, Low Inertia, And Excellent Sensitivity.No Rotation Gap And Elastic Action Can Make Up For Symmetrical Angular Misalignment..
The Rigid Coupling, We Provide Here, Are In The Size Of: Material: Stainless Steel; Color: Silver; Screws Size: M5*0.8; Bore Size: 10Mm To 12Mm/0.39Inch To 0.47Inch; Total Size: 22Mm X 20Mm/0.87Inch X 0.79Inch(L*D).
Features
- The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
- The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M5*0.8; Bore size: 10mm to 12mm/0.39inch to 0.47inch; Total Size: 22mm x 20mm/0.87inch x 0.79inch(L*D)
- Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
- Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
- Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #12
PATIKIL Shaft Coupler Connector L22 x D14 8mm to 8mm Bore Rigid Coupling Stainless Steel Shaft Joint w Screw for 3D Printers Silver 4Pack
Asin: B0BR29RDX2
Shaft Coupler Made Of Brass Material, Durable, Corrosion-Resistant, And Does Not Rust, Can Be Used For A Long Time.
Select The Appropriate Size According To The Motor Shaft, Remove The Old Shaft Connector From The Motor Shaft, And Then Install The New Motor Shaft Connector On The Motor Shaft..
Top Tight Type Rigid Coupling, High Torque With Rigidity, Low Inertia, And Excellent Sensitivity.No Rotation Gap And Elastic Action Can Make Up For Symmetrical Angular Misalignment..
The Rigid Coupling, We Provide Here, Are In The Size Of: Material: Stainless Steel; Color: Silver; Screws Size: M4*0.7; Bore Size: 8Mm To 8Mm/0.31Inch To 0.31Inch; Total Size: 22Mm X 14Mm/0.87Inch X 0.55Inch(L*D).
Features
- The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
- The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M4*0.7; Bore size: 8mm to 8mm/0.31inch to 0.31inch; Total Size: 22mm x 14mm/0.87inch x 0.55inch(L*D)
- Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
- Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
- Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #13
PATIKIL 1/8IP Hex Coupling Nut, 10 Pack Female Thread Connector 30mm Hexagonal Sleeve Nut Rod Bar Stud Tube Joint Hardware for Lamp Repair DIY
Asin: B0BN5P9PKW
Instruction: Convenient To Use, Just Connect Two Threaded Tubes, No Requirement For A Tool..
Note: Please Confirm The Thread Size. 1/8Ip Thread Has A Diameter Of Approx 3/8 Inch.
Application: The Nuts Are Mainly Applied For Jointing Two Screw Pipes. Good Light Fixtures For Fastening And Extending Thread Pipes. Used On Repairing Or Replacing Chandeliers, Ceiling Lights, Or Diy Projects..
Advantage: Carbon Steel Material Can Provide A Good Hardness And Is Not Easy To Deform. Also, The Zinc Coat Has Good Rust Resistance, And It Can Prolong Product's Service Life..
Features
- Material: Carbon Steel; Thread Size: 1/8-27 (1/8IP); Hex Width: 14mm / 0.55 Inch; Height: 30mm / 1.18 Inch;
- Advantage: Carbon steel material can provide a good hardness and is not easy to deform. Also, the zinc coat has good rust resistance, and it can prolong product's service life.
- Instruction: Convenient to use, just connect two threaded tubes, no requirement for a tool.
- Application: The nuts are mainly applied for jointing two screw pipes. Good light fixtures for fastening and extending thread pipes. Used on repairing or replacing chandeliers, ceiling lights, or DIY projects.
- NOTE: Please confirm the thread size. 1/8IP thread has a diameter of approx 3/8 inch
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #14
PATIKIL 1/8IP Hex Coupling Nut, 15 Pack Female Thread Connector 25mm Hexagonal Sleeve Nut Rod Bar Stud Tube Joint Hardware for Lamp Repair DIY
Asin: B0BN5QL5ZV
Instruction: Convenient To Use, Just Connect Two Threaded Tubes, No Requirement For A Tool..
Note: Please Confirm The Thread Size. 1/8Ip Thread Has A Diameter Of Approx 3/8 Inch.
Application: The Nuts Are Mainly Applied For Jointing Two Screw Pipes. Good Light Fixtures For Fastening And Extending Thread Pipes. Used On Repairing Or Replacing Chandeliers, Ceiling Lights, Or Diy Projects..
Advantage: Carbon Steel Material Can Provide A Good Hardness And Is Not Easy To Deform. Also, The Zinc Coat Has Good Rust Resistance, And It Can Prolong Product's Service Life..
Features
- Material: Carbon Steel; Thread Size: 1/8-27 (1/8IP); Hex Width: 14mm / 0.55 Inch; Height: 25mm / 0.98 Inch;
- Advantage: Carbon steel material can provide a good hardness and is not easy to deform. Also, the zinc coat has good rust resistance, and it can prolong product's service life.
- Instruction: Convenient to use, just connect two threaded tubes, no requirement for a tool.
- Application: The nuts are mainly applied for jointing two screw pipes. Good light fixtures for fastening and extending thread pipes. Used on repairing or replacing chandeliers, ceiling lights, or DIY projects.
- NOTE: Please confirm the thread size. 1/8IP thread has a diameter of approx 3/8 inch
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #15
PATIKIL PVC Reducer Pipe Fitting 90x75mm, Straight Coupling Adapter Connector, Gray
Asin: B0BNBWGWLC | Model: pta220928tt0125 | PartNumber: pta220928tt0125
Instruction: The Socket Openings Are Bonded By Pvc Special Glue (Not Included Here). Apply Glue On The Inside And Outside Of The Pipe, Then Insert Within 1 Minute, Set In 15 Minutes, And Use After 24 Hours For Better Effect.
Notice: Suggested Service Temperature: 5°C-60°C / 41°F-140°F. Please Confirm The Correct Size Before Ordering.
Application: Reducing Pipe Fittings Are Great For Connecting Two Unthreaded Water Supply Pipes In Different Outside Diameters Requiring High Tensile Strength. Widely Used In Building Construction, Bathrooms, Kitchens, Sinks, Laboratories, Etc..
Advantage: Pvc Connectors With Thickened Inner Wall Feature Smooth Surface, Corrosion Resistance, Good Strength And Thermal Stability, Watertight, And Long Service Life.
Features
- Shape: Straight; Height: 100mm / 3.94 inch; Big Diameters: 99x90mm / 3.9x3.54 inch (OD*ID); Small Diameters: 82x75mm / 3.23x2.95 inch (OD*ID)
- Advantage: PVC connectors with thickened inner wall feature smooth surface, corrosion resistance, good strength and thermal stability, watertight, and long service life
- Instruction: The socket openings are bonded by PVC special glue (NOT included here). Apply glue on the inside and outside of the pipe, then insert within 1 minute, set in 15 minutes, and use after 24 hours for better effect
- Application: Reducing pipe fittings are great for connecting two unthreaded water supply pipes in different outside diameters requiring high tensile strength. Widely used in building construction, bathrooms, kitchens, sinks, laboratories, etc.
- Notice: Suggested service temperature: 5 C-60 C / 41 F-140 F. Please confirm the correct size before ordering
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #16
PATIKIL Shaft Coupler Connector L22 x D14 8mm to 8mm Bore Rigid Coupling Motor Shaft Joint Connector with Screw for 3D Printers 4Pack
Asin: B0BR28H4WQ
Shaft Coupler Made Of Brass Material, Durable, Corrosion-Resistant, And Does Not Rust, Can Be Used For A Long Time.
Select The Appropriate Size According To The Motor Shaft, Remove The Old Shaft Connector From The Motor Shaft, And Then Install The New Motor Shaft Connector On The Motor Shaft..
Top Tight Type Rigid Coupling, High Torque With Rigidity, Low Inertia, And Excellent Sensitivity.No Rotation Gap And Elastic Action Can Make Up For Symmetrical Angular Misalignment..
The Rigid Coupling, We Provide Here, Are In The Size Of: Material: Brass; Color: Gold; Screws Size: M4*0.7; Bore Size: 8Mm To 8Mm/0.31Inch To 0.31Inch; Total Size: 22Mm X 14Mm/0.87Inch X 0.55Inch(L*D).
Features
- The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
- The rigid Coupling, we provide here, are in the size of: Material: Brass; Color: Gold; Screws Size: M4*0.7; Bore size: 8mm to 8mm/0.31inch to 0.31inch; Total Size: 22mm x 14mm/0.87inch x 0.55inch(L*D)
- Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
- Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
- Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #17
PATIKIL 110mm/4.3 Inch PVC Pipe Fitting, Flange Pipe Socket Coupling Connector for Pipe Connect, White
Asin: B0BD2CVJZV | Model: pta220707tt0315eu | PartNumber: pta220707tt0315eu
Instruction: Connect The Two Pipes, The Effect Will Be Better If The Pipe Fitting Is Used Together With Adhesive (Not Included Here)..
Note: Please Check The Size You Need Before Buying..
Application: The Pvc Pipe Fitting Is Used To Connect The Two Pipes Which Have The Same Diameter. The Connector End Is Used To Connect Non-Threaded And Threaded Pipes Or Pipe Fittings. Used For Connecting Valves In A Piping System..
Advantage: Pvc Material Fitting Has Strong Corrosion Resistance, High Mechanical Strength, And Wear Resistance. Smooth-Finished Internal Reduce Friction And Allow Water To Flow Smoothly..
Features
- Size: Large Inner Diameter: 110mm/4.3 inch; Small Inner Diameter: 19x25mm/0.75 x 1 inch; Large Outer Diameter: 215mm/8.46 inch; Small Outer Diameter: 122mm/4.8 inch; Height: 70mm/2.75 inch
- Advantage: PVC material fitting has strong corrosion resistance, high mechanical strength, and wear resistance. Smooth-finished internal reduce friction and allow water to flow smoothly.
- Instruction: Connect the two pipes, the effect will be better if the pipe fitting is used together with adhesive (not included here).
- Application: The PVC pipe fitting is used to connect the two pipes which have the same diameter. The connector end is used to connect non-threaded and threaded pipes or pipe fittings. Used for connecting valves in a piping system.
- NOTE: Please check the size you need before buying.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #18
PATIKIL Shaft Coupler Connector L22 x D14 7mm to 8mm Bore Rigid Coupling Brass Shaft Joint w Screw,Wrench for 3D Printers Gold 2Pack
Asin: B0BR28DDB4
Shaft Coupler Made Of Brass Material, Durable, Corrosion-Resistant, And Does Not Rust, Can Be Used For A Long Time.
Select The Appropriate Size According To The Motor Shaft, Remove The Old Shaft Connector From The Motor Shaft, And Then Install The New Motor Shaft Connector On The Motor Shaft..
Top Tight Type Rigid Coupling, High Torque With Rigidity, Low Inertia, And Excellent Sensitivity.No Rotation Gap And Elastic Action Can Make Up For Symmetrical Angular Misalignment..
The Rigid Coupling, We Provide Here, Are In The Size Of: Material: Brass; Color: Gold; Screws Size: M4*0.7; Bore Size: 7Mm To 8Mm/0.28Inch To 0.31Inch; Total Size: 22Mm X 14Mm/0.87Inch X 0.55Inch(L*D).
Features
- The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
- The rigid Coupling, we provide here, are in the size of: Material: Brass; Color: Gold; Screws Size: M4*0.7; Bore size: 7mm to 8mm/0.28inch to 0.31inch; Total Size: 22mm x 14mm/0.87inch x 0.55inch(L*D)
- Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
- Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
- Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #19
PATIKIL 1/8IP to 1/2-18 Hex Coupling Nut, 6 Pack Female Thread Connector 25mm Hexagonal Sleeve Nut Rod Bar Stud Tube Joint Adapter Hardware for Lamp Repair
Asin: B0BN5QN4KF
Instruction: Convenient To Use, Just Connect Two Threaded Tubes, No Requirement For A Tool..
Note: Please Confirm The Thread Size. 1/8Ip Thread Has A Diameter Of Approx 3/8 Inch.
Application: The Nuts Are Mainly Applied For Jointing Two Screw Pipes. Good Light Fixtures For Fastening And Extending Thread Pipes. Used On Repairing Or Replacing Chandeliers, Ceiling Lights, Or Diy Projects..
Advantage: Carbon Steel Material Can Provide A Good Hardness And Is Not Easy To Deform. Also, The Zinc Coat Has Good Rust Resistance, And It Can Prolong Product's Service Life..
Features
- Material: Carbon Steel; Thread Size: 1/8-27 (1/8IP), 1/2-18; Hex Width: 17mm / 0.67 Inch; Height: 25mm / 0.98 Inch;
- Advantage: Carbon steel material can provide a good hardness and is not easy to deform. Also, the zinc coat has good rust resistance, and it can prolong product's service life.
- Instruction: Convenient to use, just connect two threaded tubes, no requirement for a tool.
- Application: The nuts are mainly applied for jointing two screw pipes. Good light fixtures for fastening and extending thread pipes. Used on repairing or replacing chandeliers, ceiling lights, or DIY projects.
- NOTE: Please confirm the thread size. 1/8IP thread has a diameter of approx 3/8 inch
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #20
PATIKIL Shaft Coupler Connector L22 x D16 6mm to 10mm Bore Rigid Coupling Motor Shaft Joint Connector with Screw for 3D Printers 4Pack
Asin: B0BR28YD2Y
Shaft Coupler Made Of Brass Material, Durable, Corrosion-Resistant, And Does Not Rust, Can Be Used For A Long Time.
Select The Appropriate Size According To The Motor Shaft, Remove The Old Shaft Connector From The Motor Shaft, And Then Install The New Motor Shaft Connector On The Motor Shaft..
Top Tight Type Rigid Coupling, High Torque With Rigidity, Low Inertia, And Excellent Sensitivity.No Rotation Gap And Elastic Action Can Make Up For Symmetrical Angular Misalignment..
The Rigid Coupling, We Provide Here, Are In The Size Of: Material: Brass; Color: Gold; Screws Size: M4*0.7; Bore Size: 6Mm To 10Mm/0.24Inch To 0.39Inch; Total Size: 22Mm X 16Mm/0.87Inch X 0.63Inch(L*D).
Features
- The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
- The rigid Coupling, we provide here, are in the size of: Material: Brass; Color: Gold; Screws Size: M4*0.7; Bore size: 6mm to 10mm/0.24inch to 0.39inch; Total Size: 22mm x 16mm/0.87inch x 0.63inch(L*D)
- Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
- Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
- Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon
Looking For Something Else?
Search