MakerFocus 15pcs TP4056 Charging Discharging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board
Asin: B0CWNXKR4X | Model: P9S8R16X4908HWS025JI | PartNumber: P9S8R16X4908HWS025JI
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Application: Tp4056 Module Can Charge For Single-Cell Lithium Battery Or Multi-Section Parallelled Lithium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lithium Battery As A Phone Charger.
Attention: The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Damage Directly.
Reminder: Please Check All The Connections Before Charging, It Will Be Damaged If The Load Out On The Positive And Negative With Wrong Polarity. If You Do This The First Time, Please Watch The Video On Youtube Before Installation.
Note: When First Accessing The Battery, There May Be No Voltage Output Between Out+/Out-, At This Time Access To 5V Charging Can Activate The Protection Circuit, The Battery Is Disconnected From B+/B- And Then Connected Again Also Need To Be Charged To Activate The Protection Circuit. When Using A Mobile Phone Charger As Input, The Charger Should Be Able To Output 1A Or Above, Otherwise It May Not Charge Properly..
Usage: The +/- Pads Are The Power Inputs, Access To 5V. B+ Connects To The Positive Pole, B- Connects To The Negative Pole, Out+ And Out- Connects To The Loads, Such As Connecting To The Positive And Negative Pole Of The Mobile Booster Board Or Other Loads.
Features
- Upgrade Version: The input has a Type C female connector, which can be directly input as a mobile phone charger to recharge the lithium battery; The input voltage wiring pad is also reserved, which can be very convenient for DIY
- Usage: The +/- pads are the power inputs, access to 5V. B+ connects to the positive pole, B- connects to the negative pole, OUT+ and OUT- connects to the loads, such as connecting to the positive and negative pole of the mobile booster board or other loads
- Application: TP4056 module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports; The module with USB port, can be directly input to do with rechargeable lithium battery as a phone charger
- Note: When first accessing the battery, there may be no voltage output between OUT+/OUT-, at this time access to 5V charging can activate the protection circuit, the battery is disconnected from B+/B- and then connected again also need to be charged to activate the protection circuit. When using a mobile phone charger as input, the charger should be able to output 1A or above, otherwise it may not charge properly.
- Attention: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly
- Reminder: Please check all the connections before charging, it will be damaged if the load OUT on the positive and negative with wrong polarity. If you do this the first time, please watch the video on Youtube before installation
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 2.00 x 2.70 x 0.90 inches
Warranty: No Warranty
See On Amazon Similar To MakerFocus 15pcs TP4056 Charging Discharging
#1
15pcs 5V 1A TP4056 Charging Module Type-C USB 18650 Lithium Battery Charger Board with Protection (Type-C USB)
Asin: B08X6G26Q8 | Ean: 0701715460140 | UPC: 701715460140
Application:It Can Charge For Single-Cell Lith Ium Battery Or Multi-Section Parallelled Lith Ium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lith Ium Battery As A Phone Charger, And Still Retains Voltage Input Wiring Pads, Which Is Convenient For Diy..
Package Includes:15*Tp4056 Type-C Usb Charging Module.
Note:Please Check All Connections Before Charging, It Will Be Damaged If The Load Out Terminal On The Positive And Negative With Wrong Polarity. There Is Not Included Installation Instruction.If You Are The First Time To Do This Job, We Suggest You Can Watch Related Video On Youtube Before Installation..
Power Indicator: Red Is Charging, Green Is Fully Charged..
Features
- Input Voltage: 5V; Max output current: 1A; Charging cut-off voltage: 4.2V 1%; Input interface: Type-C USB
- Power Indicator: Red is charging, Green is fully charged.
- Application:It can charge for single-cell lith ium battery or multi-section parallelled lith ium batteries, can be powered by USB ports; The module with usb port, can be directly input to do with rechargeable lith ium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY.
- Note:Please check all connections before charging, it will be damaged if the load OUT terminal on the positive and negative with wrong polarity. There is not included Installation instruction.If you are the first time to do this job, we suggest you can watch related video on Youtube before installation.
- Package includes:15*TP4056 Type-C USB Charging Module
- See more on Amazon...
Brand: Atnsinc | Manufacturer: Atnsinc
Weight: 0.04 pounds
See On Amazon #2
AITRIP 10pcs TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions (10pcs TP4056 Type-c USB)
Asin: B08DNK398S | Model: EC16958 | PartNumber: EC16958 | Ean: 0701715437173 | UPC: 701715437173
Battery Overcharge Lifting Voltage: 4.00 V.
Charging Cut-Off Voltage: 4.2V ± 1%.
Battery: Over-Current Protection Current 3 A.
Maximum Charging Current Output: 1000Ma.
Features
- Input interface: Type-c USB
- Maximum charging current output: 1000mA
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Charging cut-off voltage: 4.2V 1%
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
Weight: 0.04 Pounds
See On Amazon #3
Battery Charger Module USB TP4056 3.7V 4.2V to 9V 5V 2A Charge Discharge Integrated Step Up Module,18650 Lithium Li-ion Battery Charger Module(6 PCS)
Asin: B098989NRZ | Ean: 8414825638416
Instructions For Use: Tp4056 Charger Module Can Be Used For Multimeter To Convert To Charge Lithium Batteries. Vin+ Port Input 5V Solar Panel, Bat+ Port Can Output 4.2V To Charger 3.7V 18650 Battery..
Package Contains: 6 * Lithium Li-Ion Battery Charger Module.
Small And Delicate: 1.3In*0.92In/33Mm*23Mm.
Features: Battery Charger Module Combines The Tp4056 Battery Charger With A Boost Circuit. Adds A Battery And Converts A Low Power Dc Device To A Usb Rechargeable Device..
Features
- Material: Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging.
- Features: Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device.
- Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery.
- Small and delicate: 1.3in*0.92in/33mm*23mm
- Package contains: 6 * Lithium Li-ion Battery Charger Module
- See more on Amazon...
Brand: ABSOK | Manufacturer: LESEXS
Weight: 0.04 pounds
See On Amazon #4
diymore 5pcs TP4056 Type-C USB 5V 1A Battery Charger Module Charging Board with Dual Protection Functions
Asin: B07MDPLQ18 | Model: X521365 | PartNumber: X521365 | Ean: 0680727634162 | UPC: 680727634162
Battery: Over-Current Protection Current 3 A.
Light State: No Load The Light Not Bright, Red Light For Recharging, Is Full Of Blue Light..
Maximum Charging Current Output: 1000 Ma.
Battery Overcharge Lifting Voltage: 4.00 V.
Features
- Input interface: Type-C USB.
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Maximum charging current output: 1000 ma
- Light state: no load the light not bright, red light for recharging, is full of blue light.
- See more on Amazon...
Brand: diymore | Manufacturer: diymore
See On Amazon #5
ALAMSCN TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board TC4056A with Dual Protection Functions(Pack of 12)
Asin: B08F7QSLN7 | Model: ALAMSCN | PartNumber: ALAMSCN | Ean: 0701715441620 | UPC: 701715441620
Two-In-One Charging And Discharging Protection Function..
Note: When The Battery Is Connected For The First Time, The Protection Circuit Can Be Activated By Charging It With 5V Voltage..
No Load The Light Not Bright, Red Light For Recharging, Is Full Of Green Light..
There Are Solder Joints For Input Voltage Wiring, Which Is Convenient For Diy..
Features
- The input terminal has a Type-c USB female socket, which can be directly used as an input to charge the lithium battery with a mobile phone charger.
- There are solder joints for input voltage wiring, which is convenient for DIY.
- Two-in-one charging and discharging protection function.
- No load the light not bright, red light for recharging, is full of green light.
- Note: When the battery is connected for the first time, the protection circuit can be activated by charging it with 5V voltage.
- See more on Amazon...
Brand: ALAMSCN | Manufacturer: ALAMSCN
Weight: 0.04 pounds
Warranty: 3 months
See On Amazon #6
Weewooday Charging Module Battery Charging Board with Battery Protection BMS 5V Micro USB 1A Lithium Battery Charge Module (40 Pieces)
Asin: B08VDL8YFB
Product Information: The Charging Board Inputs With Micro Usb Female, Can Be Directly Inputed To Do With Phone Charger Rechargeable Battery, Still Retains The Input Voltage Wiring Pads, Convenient For You To Diy; Charging Cut-Off Voltage: 4.2V, Max Charge Current: 1000 Ma.
Warm Notice: Please Note That The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Break Directly; The Ammeter For Testing Current Can Only Be Connected In Series With The 5V Input Terminal Of The Charging Board.
Applicable Occasions: The Battery Charging Board Is Suitable For Single-Cell Lithium Battery Or Multi-Cell Parallel Lithium Battery Charging, And The Charging Port Can Be Powered From Usb, Which Are Convenient For You To Operate.
Functional Usages: Input Voltage Is 5V, Battery Over-Discharge Protection Voltage Is 2.5V, Battery Over Current Protection Current Is 3A; Connect The Battery To The B+ B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged And The Green Light To Full.
Features
- Package contents: you will get 40 pieces charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace
- Functional usages: input voltage is 5V, battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A; Connect the battery to the B+ B-, inserted into the USB female mobile phone charger, the red light is being charged and the green light to full
- Product information: the charging board inputs with micro USB female, can be directly inputed to do with phone charger rechargeable battery, still retains the input voltage wiring pads, convenient for you to DIY; Charging cut-off voltage: 4.2V, max charge current: 1000 mA
- Applicable occasions: the battery charging board is suitable for single-cell lithium battery or multi-cell parallel lithium battery charging, and the charging port can be powered from USB, which are convenient for you to operate
- Warm notice: please note that the charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly; The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
Weight: 0.02 pounds
See On Amazon #7
HiLetgo 5pcs TP4057 1A 3.7V Lithium Battery Charging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056
Asin: B0CDWZ9MDC | Model: 3-01-1767 | PartNumber: 3-01-1767
Constant Current/Constant Voltage Charging With Over-Temperature Protection.
Dual Output Of Charging Status, No Battery And Fault Status Display.
Type-C Usb C Li-Ion Battery Charging Board.
Features
- TP4057 1A Lithium Battery Charging Board with Protection
- Type-C USB C Li-ion Battery Charging Board
- Constant current/constant voltage charging with over-temperature protection
- Dual output of charging status, no battery and fault status display
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
Asin: B06XCXPY86 | Model: 4333092022 | PartNumber: 4333092022 | Ean: 6923074054820
Input Voltage: 5V.
Inputs With Micro Usb Female, Can Be Directly Input To Do With The Phone Charger Rechargeable Lithium Battery.
Connect The Battery To The B + B-, Inserted Into The Usb Female Mobile Phone Charger, The Red Light Is Being Charged, The Green Light To Full..
Maximum Charge Current: 1000Ma.
Features
- Charging cut-off voltage: 4.2V 1%
- Maximum charge current: 1000mA
- Input voltage: 5V
- Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
- Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery
- See more on Amazon...
Brand: CHENBO | Manufacturer: CHENBO
Weight: 0.04 pounds
See On Amazon #9
10Pcs TP4056 3.7V 4.2V 9V 5V 2A Adjustable DC-DC Step Up Boost Module 18650 Lithium Li-ion Battery Charger Discharge Power Board DIY Kit Parts
Asin: B09WD9GCZC | Model: 13366-1 | PartNumber: 13366-1 | Ean: 0701715510654 | UPC: 701715510654
Battery Charger Module Combines The Tp4056 Battery Charger With A Boost Circuit. Adds A Battery And Converts A Low Power Dc Device To A Usb Rechargeable Device..
Before Use, Before Debugging, The Default Output Is About 9V. Input Voltage 4.5-8V The Output Voltage Can Be Continuously Adjusted 4.3-27V (4.3V Or More, 27V Or Less, Any Voltage Can Be Output, You Can Adjust The Voltage Counterclockwise) Charging Voltage 4.2V Charging Current Is 1A Discharge Current 2A Output Current To Calculate Output Reference Maximum Current 5V 1.4A , 9V 0.8A, 12V 0.6A Static Current Is About 0.5 Ma.
Instructions For Use: Tp4056 Charger Module Can Be Used For Multimeter To Convert To Charge Lithium Batteries. Vin+ Port Input 5V Solar Panel, Bat+ Port Can Output 4.2V To Charger 3.7V 18650 Battery..
Battery Charger Module Made Of Electronic Components.Can Be Used For Multimeter, Converted To Lithium Battery Charging..
Features
- TP4056 3.7V module input: 4.5-8V DC; Output: 4.3-27V DC (Adjustable); Battery charge termination voltage: 4.2V; Battery charge current: 1A Max; Battery Discharge current: 2A Max ; Maximum DC Output: 7W ( 5V 1.4A / 9V 0.8A / 12V 0.6A )
- Battery charger module made of electronic components.Can be used for multimeter, converted to lithium battery charging.
- Battery charger module combines the TP4056 battery charger with a boost circuit. Adds a battery and converts a low power DC device to a USB rechargeable device.
- Instructions for use: TP4056 Charger Module can be used for multimeter to convert to charge lithium batteries. VIN+ port input 5V solar panel, BAT+ port can output 4.2V to charger 3.7V 18650 battery.
- Before use, before debugging, the default output is about 9V. Input voltage 4.5-8V The output voltage can be continuously adjusted 4.3-27V (4.3V or more, 27V or less, any voltage can be output, you can adjust the voltage counterclockwise) Charging voltage 4.2V Charging current is 1A Discharge current 2A output current to calculate Output reference maximum current 5V 1.4A , 9V 0.8A, 12V 0.6A Static current is about 0.5 mA
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #10
AITRIP 12PCS 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V Adjustable DC-DC Step Up Boost Module TP4056 DIY Kit Parts
Asin: B09XM4G3JL | Ean: 0701715517400 | UPC: 701715517400
Input Voltage: 4.5-8V Dc.
Package Includes: 12 Pcs Usb Lithium Battery Charger Module.
Charging Voltage: 4.2V Dc ；Charging Current: Max. 1A.
High Quality Micro Usb Lithium Li-Ion Lipo Battery Charger Module 3.7V 4.2V Boost Step Up 5V 9V 12V.
Output Voltage: 4.3-27V Dc (Continuously Adjustable).
Discharging Current: Max. 2A.
Features
- Can be used for multimeter, converted to lithium battery charging
- Discharging current: Max. 2A
- Input voltage: 4.5-8V DC
- Output voltage: 4.3-27V DC (Continuously adjustable)
- Charging voltage: 4.2V DC Charging current: Max. 1A
- High quality micro USB Lithium Li-ion Lipo Battery Charger Module 3.7v 4.2v Boost Step Up 5V 9V 12V
- Package Includes: 12 Pcs USB lithium battery charger module
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #11
TP4056 Type-c USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Functions 3PCS
Asin: B0CD7H3XD7 | Model: D-001 | PartNumber: D-001 | Ean: 0733805323530 | UPC: 733805323530
Battery: Over-Current Protection Current 3 A.
Light State: No Load The Light Not Bright, Red Light For Recharging, Is Full Of Green Light..
Maximum Charging Current Output: 1000 Ma.
Battery Overcharge Lifting Voltage: 4.00 V.
Features
- Input interface: Type-c USB.
- Battery overcharge lifting voltage: 4.00 V
- Battery: over-current protection current 3 A
- Maximum charging current output: 1000 ma
- Light state: no load the light not bright, red light for recharging, is full of green light.
- See more on Amazon...
Brand: DUTTY | Manufacturer: DUTTY
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #12
AEDIKO 20pcs TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board TC4056A with Dual Protection Function
Asin: B0BG6WP8XC | Ean: 0687117700865 | UPC: 687117700865
Two-In-One Charging And Discharging Protection Function.
Light State:No Load The Light Not Bright, Red Light For Recharging,Green Light Is Full Charger.
The Module Come With Solder Joints For Input Voltage Wiring,Which Is Convenient For Diy.
Input Voltage: 4.35-6V (Recommended Voltage 5V).
Features
- Input Interface: Type-C USB
- Input Voltage: 4.35-6V (Recommended Voltage 5V)
- Two-in-One Charging and Discharging Protection Function
- The Module Come With Solder Joints for Input Voltage Wiring,Which is Convenient for DIY
- Light State:NO Load the Light NOT Bright, Red Light for Recharging,Green Light is FULL Charger
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
Dimensions: 0.20 x 1.02 x 0.65 inches
Warranty: 2M
See On Amazon #13
Aliotech 4Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
Asin: B091N5L7J2 | Ean: 0727536769880 | UPC: 727536769880
On-Board Micro Usb And Soldering Joints 5V Input`Port And Charging Status Indicator(Red Indicator Is Charging,Green Indicator Is Full Charged).
Package Includes 4Pcs Micro Usb 1A 18650 Tp4056 Lithium Battery Charging Board With Protection Charger Module.
Current: 3A, Board Size: 26 X 17Mm/1.02 X 0.67Inch(L*W).
Input Voltage: Dc5v,Charging Cut-Off Voltage: 4.2V Maximum Charging Current: 1A.
Features
- Micro usb lithium battery charging board with overcharge, overdischarge and overcurrent protection
- Input Voltage: DC5V,Charging Cut-off Voltage: 4.2V Maximum Charging Current: 1A
- On-board micro USB and soldering joints 5V input`port and charging status indicator(red indicator is charging,green indicator is full charged)
- Current: 3A, Board Size: 26 X 17mm/1.02 X 0.67inch(L*W)
- Package includes 4pcs Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection Charger Module
- See more on Amazon...
Manufacturer: DaDa MFG
See On Amazon #14
DiGiYes 15Pcs 5V 1A TP4056 Charging Module Type-C USB Lithium Battery Charger Board with Protection (Type-C USB)
Asin: B0CG8DRNCC
This Module Is Completely Mechanically And Automatically Processed, And Full Smt Parts Are Manufactured. Each Module Will Be Tested Before Shipment, With High Reliability..
With Power Indicator, Red Is Charging, Green Is Fully Charged..
It Can Charge For Single-Cell Lithium Battery Or Multi Section Parallel Lithium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lithium Battery As A Phone Charger, And Still Retains Voltage Input Wiring Pads, Which Is Convenient For Diy..
This Module Uses A Very Mature Charging Chip Tp4056, With Simple Peripheral Circuit, Good Protection Performance And High Charging Accuracy..
Features
- Input Voltage: 5V; Max output current: 1A; Charging cut-off voltage: 4.2V 1%; Input interface: Type-C USB.
- This module uses a very mature charging chip TP4056, with simple peripheral circuit, good protection performance and high charging accuracy.
- This module is completely mechanically and automatically processed, and full SMT parts are manufactured. Each module will be tested before shipment, with high reliability.
- It can charge for single-cell lithium battery or multi section parallel lithium batteries, can be powered by USB ports; The module with USB port, can be directly input to do with rechargeable lithium battery as a phone charger, and still retains voltage input wiring pads, which is convenient for DIY.
- With power indicator, red is charging, green is fully charged.
- See more on Amazon...
Brand: DiGiYes | Manufacturer: DiGiYes
Dimensions: 0.24 x 0.98 x 0.75 inches
See On Amazon #15
HiLetgo 5pcs TP4057 1A 3.7V Lithium Battery Charging and Discharging Board with Protection Type-C USB C Li-ion Battery Charging Board Over TP4056
Asin: B0CDWXM6K9 | Model: 3-01-1768 | PartNumber: 3-01-1768
Type-C Usb C Li-Ion Battery Charging Board.
Dual Output Of Charging Status, No Battery And Fault Status Display.
Constant Current/Constant Voltage Charging With Over-Temperature Protection.
Tp4057 Charging & Discharging In One Board.
Features
- TP4057 1A 3.7V Lithium Battery Charging & Discharging Board
- TP4057 Charging & Discharging in One Board
- Type-C USB C Li-ion Battery Charging Board
- Constant current/constant voltage charging with over-temperature protection
- Dual output of charging status, no battery and fault status display
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #16
(5 Pack) JacobsParts Micro-USB TP4056 3.7V Battery Charger Module 7W DC UPS with Adjustable Step-up Boost Output 5V 9V 12V 27V
Asin: B08NTZ953V | Model: CPNT-D-5PK | PartNumber: CPNT-D-5PK | Ean: 0845832031736 | UPC: 845832031736
Input: 4.5-8V Dc • Output: 4.3-27V Dc (Adjustable) • Battery Charge Termination Voltage: 4.2V • Battery Charge Current: 1A Max.
Size: 3.3X2.3Cm.
Battery Discharge Current: 2A Max • Maximum Dc Output: ~7W ( 5V 1.4A / 9V 0.8A / 12V 0.6A ).
Make A Rechargeable Multimeter • Add Battery Backup To An Ethernet Switch.
Features
- Module combines a TP4056 battery charger with a MT3608 boost circuit. Add a battery and turn low powered DC devices into USB rechargeable devices.
- Make a rechargeable multimeter Add battery backup to an Ethernet switch
- Input: 4.5-8V DC Output: 4.3-27V DC (Adjustable) Battery charge termination voltage: 4.2V Battery charge current: 1A Max
- Battery Discharge current: 2A Max Maximum DC Output: ~7W ( 5V 1.4A / 9V 0.8A / 12V 0.6A )
- Size: 3.3x2.3cm
- See more on Amazon...
Brand: JacobsParts | Manufacturer: JacobsParts
Weight: 0.13 pounds
See On Amazon #17
Comidox 20PCS 18650 TP4056 Lithium Battery Charging Board Micro USB Charger Module 5V 1A with Overcharge Over-Discharge Protection
Asin: B07KW1835Q | Model: CP297 | PartNumber: CP297 | Ean: 0661083410027 | UPC: 661083410027
The Current Can Be Adjusted. It Is Very Convenient To Change The Output To 100Ma-1000Ma By Changing The Fixed Resistance In The Board..
Power Indicator: Red For Charging And Green For Full Charge..
For Single-Cell Lithium Or Multi-Section Parallel Lithium Battery Charging, The Charging Port Can Be Powered From Usb..
This Module Is Fully Mechanically Automated And Fully Fabricated. Each Module Is Tested Before Shipment And Has High Reliability..
Features
- Using the very mature charging chip TP4056, the peripheral circuit is simple, the protection performance is good, and the charging accuracy is high.
- This module is fully mechanically automated and fully fabricated. Each module is tested before shipment and has high reliability.
- The current can be adjusted. It is very convenient to change the output to 100mA-1000mA by changing the fixed resistance in the board.
- For single-cell lithium or multi-section parallel lithium battery charging, the charging port can be powered from USB.
- Power indicator: Red for charging and green for full charge.
- See more on Amazon...
Brand: Comidox | Manufacturer: Comidox
See On Amazon #18
diymore 5pcs TP4056 Type-C USB 5V 1A Battery Charger Module Charging Board with LED Display Digital Tube Decimal 7 Segment 4 Digit Clock Double Displays Dots Module Serial Driver Board(5 Colors)
Asin: B0CJHL4D1D
Digital Tube 8 Grey Level Is Adjustable..
The Control Interface Electrical Level Is 5V..
Module Connects To Digital I/O On 2 Pins..
Maximum Charging Current Output: 1000 Ma Light State: No Load The Light Not Bright, Red Light For Recharging, Is Full Of Blue Light..
Features
- Input interface: Type-C USB.Battery overcharge lifting voltage: 4.00 V Battery: over-current protection current 3 A
- Maximum charging current output: 1000 ma Light state: no load the light not bright, red light for recharging, is full of blue light.
- Digital tube 8 grey level is adjustable.
- Module connects to digital I/O on 2 pins.
- The control interface electrical level is 5V.
- See more on Amazon...
Brand: diymore
See On Amazon #19
Gebildet 10pcs TP4056 Type-C Input Interface USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Dual Protection Function
Asin: B0BJVDL75S
Battery: Over-Current Protection Current 3A..
Light State: No Load The Light Not Bright, Red Light For Recharging, Is Full Of Green Light..
Maximum Charging Current Output: 1000Ma..
Battery Overcharge Lifting Voltage: 4.00V..
Features
- Input interface: Type-C USB.
- Battery overcharge lifting voltage: 4.00V.
- Battery: over-current protection current 3A.
- Maximum charging current output: 1000ma.
- Light state: no load the light not bright, red light for recharging, is full of green light.
- See more on Amazon...
Brand: Gebildet | Manufacturer: Gebildet
See On Amazon
Looking For Something Else?
Search