uxcell Metric Machine Thread Milling Tap M14 x 1 H2 Titanium Coated (Ti-coated) High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool
Asin: B0CWPBNM9M
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Ti-Coated Taps Provide Capability, Durability And Long Service Life. Fits A Wide Range Of Applications..
Features
- Thread Size: M14 x 1. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell Metric Machine Thread Milling
#1
uxcell M3 x 0.5 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B097666SK2 | Model: a20010400ux0067 | PartNumber: a20010400ux0067
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Features
- Tap Size: M3 x 0.5 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #2
uxcell M3 x 0.5 Spiral Point Thread Tap and 2.5mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool
Asin: B09TVGPS96 | Model: a22010500ux0490 | PartNumber: a22010500ux0490
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance.
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Design, Downward Chip Removal, Right Hand Thread Cutting. Suitable For Processing Through-Hole Threads, And Tapping Aluminum, Stainless Steel, Bronze, Hard Plastics. Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Features
- Tap and Drill Bit: Tap thread size: M3 x 0.5, drill bit diameter: 2.5mm / 0.1". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
- Spiral Point Tap: Spiral point design, downward chip removal, right hand thread cutting. Suitable for processing through-hole threads, and tapping aluminum, stainless steel, bronze, hard plastics. Titanium coating provides excellent corrosion resistance and wear resistance.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell M5 x 0.8 Straight Flute Thread Tap and 4.2mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Drilling Tool
Asin: B09TVJ2BB5 | Model: a22010500ux0472 | PartNumber: a22010500ux0472
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Titanium Coating Provides Excellent Corrosion Resistance And Improves Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Straight Flute Tap: Straight Flute Design, Downward Chip Removal. Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through Holes. For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics.
Features
- Tap and Drill Bit: Tap thread size: M5 x 0.8, drill bit diameter: 4.2mm / 0.17". High-speed steel tool has high hardness and toughness for wear resistance.
- Straight Flute Tap: Straight flute design, downward chip removal. Right hand thread cutting, fast tapping with accuracy. Suitable for processing through holes. For drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Titanium coating provides excellent corrosion resistance and improves wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #4
uxcell M6 x 10mm Metric Male Thread Knurled Clamping Knobs Grip Thumb Screw on Type Plastic Threaded Hand Bolt Knobs Black 8 Pcs
Asin: B07KPFGD1G | Model: a18101800ux0133 | PartNumber: a18101800ux0133
Tightly -In Plated Carbon Steel Metal Insert Ensures Optimal Durability And Functionality, Easy To Install. Great For Saw, Drill Press, Lathe And Routing Jigs, Packaging Machinery, Printing Equipment, Woodworking Machinery And Equipment..
Package Content: 8 Pcs X Knurled Thumb Screws Clamping Knobs..
Hand Bolts With Thermoset Plastic Knobs Provide Comfortable Hand Grip. The Clamping Knob Is Tight, Sturdy And Durable, With A Smooth And Beautiful Surface..
Safe And Secure Knurled Thumb Screws For The Ultimate In Adjusting And Tightening Control. The Screws Are Neat And Clear, The Force Is Even, And It Is Not Easy To Slip..
Features
- Standard Thread Size: M6 (1mm Pitch); Thread Length: 10mm / 0.39"; Knurled Head Diameter: 21mm / 0.83"; Total Height: 23mm / 0.9"
- Safe and secure knurled thumb screws for the ultimate in adjusting and tightening control. The screws are neat and clear, the force is even, and it is not easy to slip.
- Tightly -in plated carbon steel metal insert ensures optimal durability and functionality, easy to install. Great for saw, drill press, lathe and routing jigs, packaging machinery, printing equipment, woodworking machinery and equipment.
- Hand bolts with thermoset plastic knobs provide comfortable hand grip. The clamping knob is tight, sturdy and durable, with a smooth and beautiful surface.
- Package Content: 8 Pcs x Knurled Thumb Screws Clamping Knobs.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 2.76 x 1.57 inches | Weight: 0.14 pounds
See On Amazon #5
uxcell Metric Machine Tap M10 x 1.25mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool
Asin: B07KSWJYN1 | Model: a18102400ux0296 | PartNumber: a18102400ux0296
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M10 x 1.25mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.54 x 0.39 Inches | Weight: 0.00 Pounds
See On Amazon #6
uxcell M4 x 40mm Metric Male Thread Knurled Clamping Knobs Grip Thumb Screw on Type Plastic Threaded Hand Bolt Knobs Black 2 Pcs
Asin: B07KPG6BFQ | Model: a18101800ux0041 | PartNumber: a18101800ux0041
Tightly -In Plated Carbon Steel Metal Insert Ensures Optimal Durability And Functionality, Easy To Install. Great For Saw, Drill Press, Lathe And Routing Jigs, Packaging Machinery, Printing Equipment, Woodworking Machinery And Equipment..
Package Content: 2 Pcs X Knurled Thumb Screws Clamping Knobs..
Hand Bolts With Thermoset Plastic Knobs Provide Comfortable Hand Grip. The Clamping Knob Is Tight, Sturdy And Durable, With A Smooth And Beautiful Surface..
Safe And Secure Knurled Thumb Screws For The Ultimate In Adjusting And Tightening Control. The Screws Are Neat And Clear, The Force Is Even, And It Is Not Easy To Slip..
Features
- Standard Thread Size: M4 (0.7mm Pitch); Thread Length: 40mm / 1.57"; Knurled Head Diameter: 16mm / 0.63"; Total Height: 50mm / 1.98"
- Safe and secure knurled thumb screws for the ultimate in adjusting and tightening control. The screws are neat and clear, the force is even, and it is not easy to slip.
- Tightly -in plated carbon steel metal insert ensures optimal durability and functionality, easy to install. Great for saw, drill press, lathe and routing jigs, packaging machinery, printing equipment, woodworking machinery and equipment.
- Hand bolts with thermoset plastic knobs provide comfortable hand grip. The clamping knob is tight, sturdy and durable, with a smooth and beautiful surface.
- Package Content: 2 Pcs x Knurled Thumb Screws Clamping Knobs.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 2.36 x 1.18 inches | Weight: 0.00 pounds
See On Amazon #7
uxcell Metric Machine Tap M3 x 0.5mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs
Asin: B07KT1VM7G | Model: a18102400ux0267 | PartNumber: a18102400ux0267
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Standard Metric Thread Design, Clear And Tidy, Provide Rapid Chip Removal For Efficient Threading. Straight Flute Design, Right Hand Tapping Direction. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M3 x 0.5mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Straight flute design, right hand tapping direction. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 1.97 inches
See On Amazon #8
uxcell M6 x 1.0 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, Metric Screw Taps Tapping Bit for Machinist Thread Repair, 2pcs
Asin: B08J6QZRF8 | Model: a20010400ux0056 | PartNumber: a20010400ux0056
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Ticn Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: M6 x 1.0 thread with H2 tolerance, JIS standard, right hand thread cutting. Straight flutes taps provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. TICN coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #9
uxcell Metric Machine Tap M12 x 1.5mm H2 High Speed Steel 4 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool
Asin: B07KSYQZVS | Model: a18102400ux0299 | PartNumber: a18102400ux0299
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M12 x 1.5mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.54 x 0.39 Inches
See On Amazon #10
uxcell Spiral Point Plug Threading Tap M5 x 0.8 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs
Asin: B07Z9RLFRW | Model: a19091100ux0216 | PartNumber: a19091100ux0216
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Titanium Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: Thread size: M5 x 0.8; thread tolerance: H2; thread length: 20mm / 0.78"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Machine Tap #8-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs
Asin: B07VBN2P48 | Model: a19050800ux0929 | PartNumber: a19050800ux0929
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #8-32 UNC; Class: 2B; Thread Length: 20mm / 0.8 inch; Shank Side Width: 3mm / 0.12 inch; Total Length: 54mm / 2.13 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell M6 x 10mm Metric Male Thread Knurled Clamping Knobs Grip Thumb Screw on Type Plastic Threaded Hand Bolt Knobs Black 4 Pcs
Asin: B07KPG1PDZ | Model: B07KPG1PDZ | PartNumber: B07KPG1PDZ
Tightly -In Plated Carbon Steel Metal Insert Ensures Optimal Durability And Functionality, Easy To Install. Great For Saw, Drill Press, Lathe And Routing Jigs, Packaging Machinery, Printing Equipment, Woodworking Machinery And Equipment..
Package Content: 4 Pcs X Knurled Thumb Screws Clamping Knobs..
Hand Bolts With Thermoset Plastic Knobs Provide Comfortable Hand Grip. The Clamping Knob Is Tight, Sturdy And Durable, With A Smooth And Beautiful Surface..
Safe And Secure Knurled Thumb Screws For The Ultimate In Adjusting And Tightening Control. The Screws Are Neat And Clear, The Force Is Even, And It Is Not Easy To Slip..
Features
- Standard Thread Size: M6 (1mm Pitch); Thread Length: 10mm / 0.39"; Knurled Head Diameter: 21mm / 0.83"; Total Height: 23mm / 0.9"
- Safe and secure knurled thumb screws for the ultimate in adjusting and tightening control. The screws are neat and clear, the force is even, and it is not easy to slip.
- Tightly -in plated carbon steel metal insert ensures optimal durability and functionality, easy to install. Great for saw, drill press, lathe and routing jigs, packaging machinery, printing equipment, woodworking machinery and equipment.
- Hand bolts with thermoset plastic knobs provide comfortable hand grip. The clamping knob is tight, sturdy and durable, with a smooth and beautiful surface.
- Package Content: 4 Pcs x Knurled Thumb Screws Clamping Knobs.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 1.97 x 1.57 inches | Weight: 0.07 Pounds
See On Amazon #13
uxcell M2 x 0.4 Spiral Point Thread Tap and 1.6mm Drill Bit Set, Metric Titanium Plated Cobalt High Speed Steel Machine Screw Thread Tap Threading Tool
Asin: B09TW2W5X8 | Model: a22010500ux0488 | PartNumber: a22010500ux0488
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66) And High Red Hardness, High Wear Resistance.
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Design, Downward Chip Removal, Right Hand Thread Cutting. Suitable For Processing Through-Hole Threads, And Tapping Aluminum, Stainless Steel, Bronze, Hard Plastics. Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Features
- Tap and Drill Bit: Tap thread size: M2 x 0.4, drill bit diameter: 1.6mm / 0.06". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
- Spiral Point Tap: Spiral point design, downward chip removal, right hand thread cutting. Suitable for processing through-hole threads, and tapping aluminum, stainless steel, bronze, hard plastics. Titanium coating provides excellent corrosion resistance and wear resistance.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell M6 x 25mm Metric Male Thread Knurled Clamping Knobs Grip Thumb Screw on Type Plastic Threaded Hand Bolt Knobs Black 6 Pcs
Asin: B07KPG2617 | Model: B07KPG2617 | PartNumber: B07KPG2617
Tightly -In Plated Carbon Steel Metal Insert Ensures Optimal Durability And Functionality, Easy To Install. Great For Saw, Drill Press, Lathe And Routing Jigs, Packaging Machinery, Printing Equipment, Woodworking Machinery And Equipment..
Package Content: 6 Pcs X Knurled Thumb Screws Clamping Knobs..
Hand Bolts With Thermoset Plastic Knobs Provide Comfortable Hand Grip. The Clamping Knob Is Tight, Sturdy And Durable, With A Smooth And Beautiful Surface..
Safe And Secure Knurled Thumb Screws For The Ultimate In Adjusting And Tightening Control. The Screws Are Neat And Clear, The Force Is Even, And It Is Not Easy To Slip..
Features
- Standard Thread Size: M6 (1mm Pitch); Thread Length: 25mm / 0.98"; Knurled Head Diameter: 21mm / 0.83"; Total Height: 38mm / 1.5"
- Safe and secure knurled thumb screws for the ultimate in adjusting and tightening control. The screws are neat and clear, the force is even, and it is not easy to slip.
- Tightly -in plated carbon steel metal insert ensures optimal durability and functionality, easy to install. Great for saw, drill press, lathe and routing jigs, packaging machinery, printing equipment, woodworking machinery and equipment.
- Hand bolts with thermoset plastic knobs provide comfortable hand grip. The clamping knob is tight, sturdy and durable, with a smooth and beautiful surface.
- Package Content: 6 Pcs x Knurled Thumb Screws Clamping Knobs.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 2.36 x 1.97 inches | Weight: 0.18 pounds
See On Amazon #15
uxcell Thread Milling Threading Tap 3/8"-24 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade
Asin: B09GKC5HL3 | Model: a21061800ux0726 | PartNumber: a21061800ux0726
Applications: Suitable For Processing Through Holes. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Breakage To The Tap Due To Uneven Force. The Tapping Angle Should Be 90 Degrees Vertical And Stable..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Tap Size: 3/8"-24 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications.
- Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force. The tapping angle should be 90 degrees vertical and stable.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #16
uxcell Combination Drill and Tap Bit, 1/4" Hex Shank M6 x 1 Metric Titanium Coated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool 2pcs
Asin: B0B1VBVVH6 | Model: a22040200ux0983 | PartNumber: a22040200ux0983
Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance And Heat Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Combination Drill and Tap Bit: Thread Size: M6 x 1; Hex Shank Size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell M8 x 1.25 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B097675VWF | Model: a20010400ux0075 | PartNumber: a20010400ux0075
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Features
- Tap Size: M8 x 1.25 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #18
uxcell M2.5 x 0.45 Spiral Point Thread Tap and 2.1mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Tool
Asin: B09TVH1R8C | Model: a22010500ux0510 | PartNumber: a22010500ux0510
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches.Titanium Coating Provides Excellent Corrosion Resistance And Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Point Tap: Spiral Point Flute Design, Downward Chip Removal, Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through-Hole Threads. For Fast Tapping In Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics..
Features
- Tap and Drill Bit: Tap thread size: M2.5 x 0.45, drill bit diameter: 2.1mm / 0.08". High-speed steel tool has high hardness and toughness for wear resistance. Good for general purpose applications.
- Spiral Point Tap: Spiral point flute design, downward chip removal, right hand thread cutting, fast tapping with accuracy. Suitable for processing through-hole threads. For fast tapping in aluminum, die steel, stainless steel, bronze, hard plastics.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.Titanium coating provides excellent corrosion resistance and wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell M8 x 25mm Metric Male Thread Knurled Clamping Knobs Grip Thumb Screw on Type Plastic Threaded Hand Bolt Knobs Black 4 Pcs
Asin: B07KPFWVYY | Model: a18101800ux0069 | PartNumber: a18101800ux0069
Tightly -In Plated Carbon Steel Metal Insert Ensures Optimal Durability And Functionality, Easy To Install. Great For Saw, Drill Press, Lathe And Routing Jigs, Packaging Machinery, Printing Equipment, Woodworking Machinery And Equipment..
Package Content: 4 Pcs X Knurled Thumb Screws Clamping Knobs..
Hand Bolts With Thermoset Plastic Knobs Provide Comfortable Hand Grip. The Clamping Knob Is Tight, Sturdy And Durable, With A Smooth And Beautiful Surface..
Safe And Secure Knurled Thumb Screws For The Ultimate In Adjusting And Tightening Control. The Screws Are Neat And Clear, The Force Is Even, And It Is Not Easy To Slip..
Features
- Standard Thread Size: M8 (1.25mm Pitch); Thread Length: 25mm / 0.98"; Knurled Head Diameter: 25mm / 0.98"; Total Height: 41mm / 1.661"
- Safe and secure knurled thumb screws for the ultimate in adjusting and tightening control. The screws are neat and clear, the force is even, and it is not easy to slip.
- Tightly -in plated carbon steel metal insert ensures optimal durability and functionality, easy to install. Great for saw, drill press, lathe and routing jigs, packaging machinery, printing equipment, woodworking machinery and equipment.
- Hand bolts with thermoset plastic knobs provide comfortable hand grip. The clamping knob is tight, sturdy and durable, with a smooth and beautiful surface.
- Package Content: 4 Pcs x Knurled Thumb Screws Clamping Knobs.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 3.54 x 2.36 inches | Weight: 0.20 Pounds
See On Amazon #20
uxcell M6 x 15mm Metric Male Thread Knurled Clamping Knobs Grip Thumb Screw on Type Plastic Threaded Hand Bolt Knobs Black 4 Pcs
Asin: B07KPGKFSS | Model: a18101800ux0048 | PartNumber: a18101800ux0048
Tightly -In Plated Carbon Steel Metal Insert Ensures Optimal Durability And Functionality, Easy To Install. Great For Saw, Drill Press, Lathe And Routing Jigs, Packaging Machinery, Printing Equipment, Woodworking Machinery And Equipment..
Package Content: 4 Pcs X Knurled Thumb Screws Clamping Knobs..
Hand Bolts With Thermoset Plastic Knobs Provide Comfortable Hand Grip. The Clamping Knob Is Tight, Sturdy And Durable, With A Smooth And Beautiful Surface..
Safe And Secure Knurled Thumb Screws For The Ultimate In Adjusting And Tightening Control. The Screws Are Neat And Clear, The Force Is Even, And It Is Not Easy To Slip..
Features
- Standard Thread Size: M6 (1mm Pitch); Thread Length: 15mm / 0.59"; Knurled Head Diameter: 20mm / 0.79"; Total Height: 28mm / 1.1"
- Safe and secure knurled thumb screws for the ultimate in adjusting and tightening control. The screws are neat and clear, the force is even, and it is not easy to slip.
- Tightly -in plated carbon steel metal insert ensures optimal durability and functionality, easy to install. Great for saw, drill press, lathe and routing jigs, packaging machinery, printing equipment, woodworking machinery and equipment.
- Hand bolts with thermoset plastic knobs provide comfortable hand grip. The clamping knob is tight, sturdy and durable, with a smooth and beautiful surface.
- Package Content: 4 Pcs x Knurled Thumb Screws Clamping Knobs.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 1.97 x 1.57 inches | Weight: 0.08 Pounds
See On Amazon
Looking For Something Else?
Search