ASNOMY 7Inch Extra Long Forstner Bit Extension for Adding Over 5-3/4 inches of Drilling Depth to Your 3/8" Round or Hex Shafts Forstner Bit
Asin: B0CX48VWYL | Model: AS0155-7IN9 | PartNumber: AS0155-7IN9
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.👷High-Carbon Steel Construction, Precision Ground And Polished, Ensuring It's Sturdy And Durable;.
👷Hex Shank Dia.: 3/8-Inch, Total Length: 7 Inch, Extend Length: 5-3/4 Inch..
👷Two Set Screws And Hex Key Included. To Fasten The Shank In Place, Use The Hex Key To Tighten These Screws;.
👷The Collet Inside Diameter Is 3/8 Inch(9.7Mm). This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller;.
Features
- Extends any Forstner bit shank an additional 5-3/4 inches, Helps you use standard forstner drill bits drilling for flat bottom holes or start deep hole turning projects like on larger vases or containers;
- The collet inside diameter is 3/8 inch(9.7mm). This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller;
- High-carbon steel construction, precision ground and polished, ensuring it's sturdy and durable;
- Two set screws and hex key included. To fasten the shank in place, use the hex key to tighten these screws;
- Hex Shank Dia.: 3/8-inch, Total length: 7 inch, Extend Length: 5-3/4 inch.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon Similar To ASNOMY 7Inch Extra Long Forstner
#1
Irwin Tools IRWIN Marples Forstner Bit Set, Wood Drilling, 8 Piece (1966892)
Asin: B07145HBPL | Model: 1966892 | PartNumber: 1966892 | Ean: 0042526943546 | UPC: 042526943546
Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
Set Includes 1/4" (6.3Mm), 3/8" (9.5Mm), 1/2" (12.7Mm), 5/8" (15.8Mm), 3/4" (19.0Mm), 7/8" (22.2Mm), 1" (25.4Mm), 1-3/8" (34.9Mm) Forstner Bits.
Reduced Shank Fits 3/8" And Larger Drills And Drill Presses.
Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
Features
- Easily drills high-quality flat-bottomed and pocket holes
- Features optimized ultra-sharp cutting teeth specifically engineered to cut through hard and soft woods smoothly and efficiently
- Significantly reduces cutting time compared with traditional forstner bits
- Reduced shank fits 3/8 and larger drills and drill presses
- Set includes 1/4 (6.3mm), 3/8 (9.5mm), 1/2 (12.7mm), 5/8 (15.8mm), 3/4 (19.0mm), 7/8 (22.2mm), 1 (25.4mm), 1-3/8 (34.9mm) forstner bits
- See more on Amazon...
Brand: IRWIN | Manufacturer: Irwin Tools
Dimensions: 2.50 x 9.70 x 9.60 inches | Weight: 1.84 Pounds
Warranty: CN
See On Amazon #2
IRWIN Marples Forstner Bit Set, Wood Drill Bits, Made of Carbon Steel, Ideal for Fine Woodworking, Cabinet-making and more, 14 Pieces (1966893)
Asin: B071S1BGXV | Model: 1966893 | PartNumber: 1966893 | Ean: 7412822741079, 0042526943553 | UPC: 042526943553
Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
Reduced Shank Fits 3/8" And Larger Drills And Drill Presses, 1-1/2" (38.1Mm), 1-5/8" (41.2Mm), 2" (50.8Mm) Forstner Bits.
Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
Features
- Easily Drills High-Quality Flat-Bottomed And Pocket Holes
- Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently
- Significantly Reduces Cutting Time Compared With Traditional Forstner Bits
- Reduced Shank Fits 3/8 And Larger Drills And Drill Presses, 1-1/2 (38.1Mm), 1-5/8 (41.2Mm), 2 (50.8Mm) Forstner Bits
- See more on Amazon...
Brand: IRWIN | Manufacturer: Irwin Tools
Dimensions: 11.50 x 3.20 x 11.60 Inches | Weight: 0.00 Pounds
Warranty: CN
See On Amazon #3
Freud PB-005: 3/4" (Dia.) Forstner Bit
Asin: B0000AV6ZU | Model: PB-005 | PartNumber: PB-005 | Ean: 5448095583285, 0008925028994 | UPC: 008925028994
Quality Forged Construction For Extended Life.
Steep Angled Cutting Edges – Produce Holes That Are Smooth And Flat, And Create “Chisel-Like" Curls For Fast, Clean Chip Removal..
Freud's Limited Lifetime Guarantee.
Ultra Sharp Spur To Ensure An Accurate Starting Hole.
Razor Sharp Serrated Edge For Fast And Flawless Cutting.
Features
- Specs: Diameter 3/4", Length 3-1/2", Rotation RH, Shank 3/8"
- Razor sharp serrated edge for fast and flawless cutting
- Quality Forged Construction for extended life
- Ultra Sharp Spur to ensure an accurate starting hole
- Steep Angled Cutting Edges produce holes that are smooth and flat, and create chisel-like curls for fast, clean chip removal.
- Freud's Limited Lifetime Guarantee
- See more on Amazon...
Brand: Freud | Manufacturer: Freud
Dimensions: 1.05 x 6.65 x 3.25 Inches | Weight: 0.15 Pounds
Warranty: Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4494
See On Amazon #4
ASNOMY 6-11/16Inch Extra Long Forstner Bit Extension for Adding Over 5-3/8 inches of Drilling Depth to Your 3/8" & 2/5" Round or Hex Shafts Forstner Bit
Asin: B0CJTXS339
👷High-Carbon Steel Construction, Precision Ground And Polished, Ensuring It's Sturdy And Durable;.
👷Triangular Shank Dia.: 3/8-Inch, Total Length: 6-11/16 Inch, Extend Length: 5-3/8 Inch..
👷Two Set Screws And Hex Key Included. To Fasten The Shank In Place, Use The Hex Key To Tighten These Screws;.
👷The Collet Inside Diameter Is 2/5 Inch(10.5Mm). This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 2/5Inch, 3/8 Inch Or Slightly Smaller;.
Features
- Extends any Forstner shank bit an additional 5-3/8 inches, Helps you use standard forstner drill bits drilling for flat bottom holes or start deep hole turning projects like on larger vases or containers;
- The collet inside diameter is 2/5 inch(10.5mm). This tolerance is very tight and designed to accept forstner bits with shank sizes of 2/5inch, 3/8 inch or slightly smaller;
- High-carbon steel construction, precision ground and polished, ensuring it's sturdy and durable;
- Two set screws and hex key included. To fasten the shank in place, use the hex key to tighten these screws;
- Triangular Shank Dia.: 3/8-inch, Total length: 6-11/16 inch, Extend Length: 5-3/8 inch.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #5
Irwin Tools 1966898 Irwin Marples Wood Drilling Forstner Bit, 3/4",
Asin: B01JIK93PK | Model: 1966898 | PartNumber: 1966898 | Ean: 0042526943607 | UPC: 042526943607
Easily Drills High-Quality Flat-Bottomed And Pocket Holes With A Fine, Smooth Finish.
Ideal For Fine Woodworking, Cabinet-Making, And More.
Reduced Shank Fits 3/8" And Larger Drills And Drill Presses.
Features Optimized Ultra-Sharp Knife Edge Design Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
Features
- Drills flat-bottomed and pocket holes in significantly less time than traditional Forstner bits
- Features optimized ultra-sharp knife edge design specifically engineered to cut through hard and soft woods smoothly and efficiently
- Easily drills high-quality flat-bottomed and pocket holes with a fine, smooth finish
- Reduced shank fits 3/8 and larger drills and drill presses
- Ideal for fine woodworking, cabinet-making, and more
- See more on Amazon...
Brand: IRWIN | Manufacturer: Newell Brands
Dimensions: 6.75 x 1.10 x 3.75 inches | Weight: 0.14 pounds
See On Amazon #6
Fulton 6 inch Long Forstner Bit Extension for Adding Over 5-5/8 inches of Drilling Depth to Your Forstner Bit. for Wood Turners, Furniture, Carpentry and Construction
Asin: B003UO7Y98 | Model: 927 | PartNumber: 927 | Ean: 0810948014492 | UPC: 810948014492
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 5-5/8 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #7
ASNOMY 6PCS Large Size Forstner Bit Set, 1-3/8Inch to 2-3/4Inch Carbide Tipped Forstner Drill Bit for Hard Wood, Wood Drilling bit Set Woodworking Hinge Cutter Tool Kits for Wood Plastic Plywood
Asin: B0B4RCVRNX | Ean: 0725576864619 | UPC: 725576864619
【Large Size】Drilling Diameter：1-3/8Inch, 1-9/16Inch, 1-3/4Inch, 2Inch, 2-3/8Inch, 2-3/4Inch, Hex Shank Dia.: 3/8 Inch(9.5Mm) , Drilling Depth: 2-3/8Inch (60Mm), Total Length: 3-9/16 Inch(90Mm)..
【Widely Applications】Widely Used For Drilling Holes On On Wood And Plastic Products, Furniture, Door Hinge, Desk. Used On Cutting Wood, Plywood, Solid Wood Boards, Mdf, Plastics, Sandwich Panels, Etc..
【 Sharp & Clean Holes】This Tct (Tungsten Carbide Tipped Cutters)Forstner Bit Set Perfect For Hard Wood, Easily Drill Precise Flat Bottom Holes With No Chipping In Hard Wood Or Soft Wood.(Drilling Depth Up To 2-3/8Inch).
【Top Quality】Our Forstner Drill Bit Made From High Quality Tungsten Carbide Tipped Cutters, And Solid Hardened Steel Body, Ensuring Its High Hardness, Rust Proof, Sturdy And Durable；.
Features
- Warm Tips For large-size Forstner drill bits ( 60mm), it is best to use machines with good fixation performance for drilling operations, such as drill presses, bench drills, vertical drill presses and vertical electric drills, etc. If you must use a hand electric drill to operate , be sure to use a high-power electric hand drill, and it is best to use it with a vise with good fixation effect. Otherwise, good hole opening effect will not be achieved.
- Top Quality Our Forstner Drill bit made from high quality Tungsten Carbide Tipped Cutters, and solid hardened steel body, ensuring its high hardness, rust proof, sturdy and durable
- Large Size Drilling diameter 1-3/8Inch, 1-9/16Inch, 1-3/4Inch, 2Inch, 2-3/8Inch, 2-3/4Inch, Hex Shank Dia.: 3/8 Inch(9.5mm) , Drilling depth: 2-3/8Inch (60mm), Total length: 3-9/16 Inch(90mm).
- Sharp & Clean Holes This TCT (Tungsten Carbide Tipped Cutters)Forstner bit set perfect for hard wood, easily drill precise flat bottom holes with no chipping in Hard Wood or soft wood.(Drilling depth up to 2-3/8Inch)
- Widely Applications Widely used for drilling holes on on wood and plastic products, furniture, door hinge, desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, sandwich panels, etc.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #8
COMOWARE Forstner Bit Set - 16 Pcs Forstner Drill Bits Set for Wood, Auger Opener Round Shank Drilling Cutting Tool for Woodworking
Asin: B08P5CT3T9
All Size You Need: 16 Pcs Includes 1/4" (6.3Mm), 3/8" (9.5Mm), 1/2" (12.7Mm), 5/8" (15.8Mm), 3/4" (19.0Mm), 7/8" (22.2Mm), 1" (25.4Mm), 1-1/8" (28.5Mm), 1-1/4" (31.7Mm), 1-3/8" (34.9Mm) ，1-1/2（38.1Mm), 1-5/8(41.28Mm), 1-3/4(44.45Mm), 1-7/8(47.63Mm), 2(50.8Mm) And 2-1/8(53.98Mm) Forstner Bits.
Efficient Cutting: Significantly Reduces Cutting Time Compared With Traditional Drill Bits.Also These Drill Bits Make Drilling Hole Smooth And Smooth.
Sharp Design: Our Drill Has The Features Of Sharp Edge, Accurate Positioning, High Hardness, Impact Resistance, High Precision, Smooth Cutting And High Toughness. Fostner Bit Can Produce Holes That Are Smooth And Flat, And Create “Chisel-Like" Curls For Fast, Clean Chip Removal..
Widely Application: It Is Suitable For Industrial Hinge Installation, Wood Processing And Maintenance, Model Production, Installation Of Spherical Door, Drawers And Other Occasions. It Can Easily Cut Wood, Plastic, Resin, Pvc And Other Materials.
Features
- DURABLE MATERIAL: Forstner bit is made of carbon steel, with the advantage of sharp edge, accurate positioning, high precision and stable cutting.
- WIDELY APPLICATION: It is suitable for industrial hinge installation, wood processing and maintenance, model production, installation of spherical door, drawers and other occasions. It can easily cut wood, plastic, resin, PVC and other materials
- ALL SIZE YOU NEED: 16 PCS includes 1/4 (6.3mm), 3/8 (9.5mm), 1/2 (12.7mm), 5/8 (15.8mm), 3/4 (19.0mm), 7/8 (22.2mm), 1 (25.4mm), 1-1/8 (28.5mm), 1-1/4 (31.7mm), 1-3/8 (34.9mm) 1-1/2 38.1mm), 1-5/8(41.28mm), 1-3/4(44.45mm), 1-7/8(47.63mm), 2(50.8mm) and 2-1/8(53.98mm) forstner bits
- SHARP DESIGN: Our drill has the features of sharp edge, accurate positioning, high hardness, impact resistance, high precision, smooth cutting and high toughness. Fostner bit can produce holes that are smooth and flat, and create chisel-like curls for fast, clean chip removal.
- EFFICIENT CUTTING: Significantly reduces cutting time compared with traditional drill bits.Also these drill bits make drilling hole smooth and smooth
- See more on Amazon...
Brand: COMOWARE | Manufacturer: COMOWARE
Weight: 1.00 Pounds
See On Amazon #9
Fulton 10 inch Long Forstner Bit Extension for Adding Over 8" of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)
Asin: B07ZTJT9GC | Model: 2206 | PartNumber: 2206 | Ean: 0817918022440 | UPC: 817918022440
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 8-1/2 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.00 pounds
See On Amazon #10
Freud PB-012: Precision Shear Serrated Edge Forstner Drill Bit
Asin: B0000AV738 | Model: PB-012 | PartNumber: PB-012 | Ean: 0008925028925 | UPC: 008925028925
Quality Forged Construction For Extended Life.
Steep Angled Cutting Edges – Produce Holes That Are Smooth And Flat, And Create “Chisel-Like" Curls For Fast, Clean Chip Removal..
Freud's Limited Lifetime Guarantee.
Ultra Sharp Spur To Ensure An Accurate Starting Hole.
Razor Sharp Serrated Edge For Fast And Flawless Cutting.
Features
- Specs: Diameter 1-5/8", Length 3-1/2", Rotation RH, Shank 2.25"
- Razor sharp serrated edge for fast and flawless cutting
- Quality Forged Construction for extended life
- Ultra Sharp Spur to ensure an accurate starting hole
- Steep Angled Cutting Edges produce holes that are smooth and flat, and create chisel-like curls for fast, clean chip removal.
- Freud's Limited Lifetime Guarantee
- See more on Amazon...
Brand: Freud | Manufacturer: Freud
Dimensions: 2.15 x 6.55 x 3.25 Inches | Weight: 0.32 Pounds
Warranty: Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4715
See On Amazon #11
ASNOMY 6PCS Large Size Forstner Drill Bit, 1-3/8Inch to 2-3/4Inch Carbide Tipped Forstner Bit for Hard Wood, Wood Drilling Hole Saw Set Woodworking Hinge Cutter Tool Kits for Wood Plastic Plywood
Asin: B09PKXXN17 | Ean: 0725576864299 | UPC: 725576864299
【Size】Drilling Diameter：1-3/8Inch, 1-9/16Inch, 1-3/4Inch, 2Inch, 2-3/8Inch, 2-3/4Inch, Hex Shank Dia.: 3/8 Inch(9.5Mm) , Drilling Depth: 2-3/8Inch (60Mm), Total Length: 3-9/16 Inch(90Mm)..
【Widely Applications】Can Be Used For Drilling Holes On On Wood And Plastic Products, Furniture, Door Hinge, Desk. Used On Cutting Wood, Plywood, Solid Wood Boards, Mdf, Plastics, Etc..
【 Sharp & Clean Holes】This Tct (Tungsten Carbide Tipped Cutters)Forstner Bit Set Perfect For Hard Wood, Can Drill Precise Flat Bottom Holes With No Chipping In Hard Wood Or Soft Wood.(Drilling Depth Up To 2-3/8Inch).
【Top Quality】Made From High Quality Tungsten Carbide Tipped Cutters, Solid Hardened Steel Body, Ensuring Its High Hardness, Rust Proof, Sturdy And Durable；.
Features
- Warm Tips Since we are all large-size Forstner Drill bit, it is best to use machines with good fixing performance for drilling operations, such as drilling machines, bench drills, vertical drilling machines and vertical electric drills, etc., If you must use a hand electric drill to operate , be sure to use a high-power electric hand drill, and it is best to use it with a vise with good fixation effect. Otherwise, good hole opening effect will not be achieved.
- Top Quality Made from high quality Tungsten Carbide Tipped Cutters, solid hardened steel body, ensuring its high hardness, rust proof, sturdy and durable
- Size Drilling diameter 1-3/8Inch, 1-9/16Inch, 1-3/4Inch, 2Inch, 2-3/8Inch, 2-3/4Inch, Hex Shank Dia.: 3/8 Inch(9.5mm) , Drilling depth: 2-3/8Inch (60mm), Total length: 3-9/16 Inch(90mm).
- Sharp & Clean Holes This TCT (Tungsten Carbide Tipped Cutters)Forstner bit set perfect for hard wood, can drill precise flat bottom holes with no chipping in Hard Wood or soft wood.(drilling depth up to 2-3/8Inch)
- Widely Applications Can be used for drilling holes on on wood and plastic products, furniture, door hinge, desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, etc.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #12
Forstner Bit 1-3/4 Inch 45mm - Carbide Tipped Forstner Drill Bits - Forstner Bits for Woodworking Hole Saw Auger Opener, Drilling Boring Bit, for Hard Wood Plastic Plywood, by Sinoprotool
Asin: B0C9TF47MJ | Ean: 0797424645930 | UPC: 797424645930
Cut Great: Using The Sharp Forstner Bit, You Can Drill Accurate, Smooth, Neat Holes Without Burrs, Even In End-Grain And Through Knots, Arc Curve Design Head Contributes To Removing Sawdust Faster, Making Your Work More Efficient..
Multipurpose: The Forstner Bit Can Be Widely Used For Drilling Holes On Wood, Plastic Products, Furniture, Door Hinge And Desk.Ideal For Fine Woodworking, Cabinet-Making, Socket/Port/Plug Installation And More, Used On Cutting Wood, Plywood, Solid Wood Boards, Mdf, Plastics, Etc. Can Be Used In Drill Press, Bench Drill, Vertical Drilling Machine, Cnc Carving Machine, Etc.
Easy To Grab: This Forstner Drill Bits Features Optimized Ultra-Sharp Cutting Teeth, Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently. Easily Drills High-Quality Flat-Bottomed And Pocket Holes With A Fine, Smooth Finish.
Great Quality: This Forstner Bits For Woodworking Shank Is Made Of Steel 45#, Made From High Quality Tungsten Carbide Tipped Cutters, Solid Hardened Steel Body, Ensuring Its High Hardness, Rust Proof, Sharp And Durable, Longer Service Life..
Features
- Precision Of Size: The forstner bit drilling diameter 1-3/4 Inch 45mm, Hex Shank Dia.: 2/5Inch(10mm) , Drilling depth: 2-3/8Inch(60mm).
- Great Quality: This forstner bits for woodworking shank is made of steel 45#, made from high quality Tungsten Carbide Tipped Cutters, solid hardened steel body, ensuring its high hardness, rust proof, sharp and durable, longer service life.
- Cut Great: Using the sharp forstner bit, you can drill accurate, smooth, neat holes without burrs, even in end-grain and through knots, Arc curve design head contributes to removing sawdust faster, making your work more efficient.
- Easy to Grab: This forstner drill bits Features optimized ultra-sharp cutting teeth, specifically engineered to cut through hard and soft woods smoothly and efficiently. Easily drills high-quality flat-bottomed and pocket holes with a fine, smooth finish
- Multipurpose: The forstner bit can be widely used for drilling holes on wood, plastic products, furniture, door hinge and desk.Ideal for fine woodworking, cabinet-making, socket/Port/Plug Installation and more, Used on cutting wood, plywood, solid wood boards, MDF, plastics, etc. Can be used in drill press, bench drill, vertical drilling machine, CNC carving machine, etc
- See more on Amazon...
Brand: Sinoprotools | Manufacturer: Sinoprotools
See On Amazon #13
Amana Tool - FO-111 Forstner Pattern Bit 7/16 Dia x 3/8 Shank
Asin: B000P4LXW0 | Model: FO-111 | PartNumber: FO-111 | Ean: 0738685361115 | UPC: 738685361115
Overall Length (L): 3-1/2.
Commitment To Offer The Highest Consistent Quality And Innovative Products.
U.S.A. Corporate Headquarters And Warehouse, Located In New York.
(D) Shank: 3/8.
Features
- (D) diameter: 7/16
- (D) shank: 3/8
- Overall length (L): 3-1/2
- U.S.A. Corporate headquarters and warehouse, located in new York
- Commitment to offer the highest consistent quality and innovative products
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Weight: 0.00 Pounds
See On Amazon #14
HPHOPE 7/8 Inch Forstner Bit, 7/8" Forstner Drill Bit for Wood, Drill Bits Round Shank
Asin: B0C832C4F6
【Easy To Start】The Design Of The Center Point Of The Forstner Drills Allows Precise Positioning Without Slipping,Which Makes Drilling More Easy.
【Best Service】Lifetime After-Sales Service, Any Questions Will Be Answered Quickly By Human Customer Service, 2 Years Of Unconditional Full Refund Or Re-Delivery, Without Wasting Your Time.
【Compatibility】5/16" Cylindrical Shank, 3-1/2" Overall Length, Fits All Drill Drivers And Drill Presses With 5/16" Chuck And Adjustable.
【Clean, Smooth Holes】The Tooth-Shaped Design Of This High-Speed Steel Forstner Bit Ensures Less Friction And Heat.It Is Superiority In Removal Chip Better.Cut The Clean, Smooth Holes.
Features
- Areas of Application 7/8" Forstner bit is ideal for drilling in soft or hard wood, veneered wood and non-laminated chipboard
- Clean, Smooth Holes The tooth-shaped design of this high-speed steel forstner bit ensures less friction and heat.It is superiority in removal chip better.Cut the clean, smooth holes
- Easy to Start The design of the center point of the forstner drills allows precise positioning without slipping,which makes drilling more easy
- Compatibility 5/16 cylindrical shank, 3-1/2 overall length, fits all drill drivers and drill presses with 5/16 chuck and adjustable
- Best Service Lifetime after-sales service, any questions will be answered quickly by human customer service, 2 years of unconditional full refund or re-delivery, without wasting your time
- See more on Amazon...
Brand: HPHOPE | Manufacturer: HPHOPE
See On Amazon #15
BAIDETS 1-7/8 Inch Forstner Bit - Forstner Drill Bit 1-7/8" for Wood by Round Shank
Asin: B0C87W3LT6
The Tooth-Shaped Design For Fast And Flawless Cutting, Ensures Less Friction And Heat, Which Enable Optimized Chip Removal, Longer Service Life..
We Provide 100% Satisfaction Service, If You Have Any Questions, Please Kindly Feel Free To Contact Us.
Version Of The Forstner Drill Centering Tip, Centering Tip Of The Drill Allows Precise Positioning Without Slipping, For Cutting Clean And Accurate Flat Bottom Holes..
Excellent For Drilling In Softwood Or Solidwood, Plywood,Coated Chip Board, Laminates As Well As Mdf Plates.
Features
- Forstner bit made of High speed steel, has a 1-7/8" cutting diameter and round shank, compatible with all standard drill and drill press chucks.
- Excellent for drilling in softwood or solidwood, plywood,coated chip board, laminates as well as mdf plates
- The tooth-shaped design for fast and flawless cutting, ensures less friction and heat, which enable optimized chip removal, longer service life.
- Version of the Forstner drill centering tip, centering tip of the drill allows precise positioning without slipping, for cutting clean and accurate flat bottom holes.
- We provide 100% satisfaction service, if you have any questions, please kindly feel free to contact us
- See more on Amazon...
Brand: BAIDETS | Manufacturer: BAIDETS
Weight: 0.10 Pounds
See On Amazon #16
BOSCH FB700 7-Piece Wood Forstner Bit Set
Asin: B000EPTFQQ | Model: FB700 | PartNumber: FB700 | Ean: 0000346179897, 0754262180900 | UPC: 754262180900, 000346179897
Brad Point Centers Bit For Easy Positioning Of Hole.
Included Forstner Bits: (1) 1/4”, (1) 3/8”, (1) 1/2", (1) 5/8”, (1) 3/4”, (1) 7/8”, (1) 1”.
Bosch Forstner Drill Bits Are Suitable For Portable Drills Or Stationary Machines.
Chrome-Steel Alloy Construction Allows The Bits To Withstand High Temperatures During Drilling, Reducing The Risk Of Burning.
Features
- Designed for perfectly smooth, flat-bottomed and splinter-free holes, even in end-grain and through knots
- Chrome-steel alloy construction allows the bits to withstand high temperatures during drilling, reducing the risk of burning
- Brad point centers bit for easy positioning of hole
- Bosch forstner drill bits are suitable for portable drills or stationary machines
- Included forstner bits: (1) 1/4 , (1) 3/8 , (1) 1/2, (1) 5/8 , (1) 3/4 , (1) 7/8 , (1) 1
- See more on Amazon...
Brand: BOSCH | Manufacturer: Bosch
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.70 pounds
See On Amazon #17
Freud PB-107 Precision Shear 7 Piece 1/4-Inch to 1-Inch Serrated Edge Forstner Drill Bit Assortment
Asin: B0000225ZO | Model: FB-107 | PartNumber: FB-107 | Ean: 0008925480181, 0008925032472, 7466655962316 | UPC: 008925032472, 008925480181
7-Piece Forstner Drill Bit Set.
7-Piece Forstner Drill Bit Set.
7-Piece Forstner Drill Bit Set.
7-Piece Forstner Drill Bit Set.
Features
- 7-Piece Forstner Drill Bit Set
- 7-Piece Forstner Drill Bit Set
- 7-Piece Forstner Drill Bit Set
- 7-Piece Forstner Drill Bit Set
- 7-Piece Forstner Drill Bit Set
- See more on Amazon...
Brand: Freud | Manufacturer: Freud
Dimensions: 1.50 x 6.95 x 4.50 inches
See On Amazon #18
Mollom 1-7/8" (48mm) Forstner Drill Bit for Precise Woodworking with Durable YG8 Carbide Thickness of 2.0mm,This Hinge Cutter Tool is Ideal for Hard Wood, Plastic, Plywood.
Asin: B0CNXBVZ7J | Model: FDB01048 | PartNumber: FDB01048
💡【2.00Mm Super Thick Blade】Adopts Industrial Grade 2.0Mm Thickness Yg8 Blade, Which Extends The Service Life By 10 Times Compared To 1.3Mm Thick Blade..
❗【Warm Tips】For Large-Size Forstner Drill Bits (≥60Mm), It Is Best To Use Machines With Good Fixation Performance For Drilling Operations, Such As Drill Presses, Bench Drills, Vertical Drill Presses And Vertical Electric Drills, Etc. If You Must Use A Hand Electric Drill To Operate , Be Sure To Use A High-Power Electric Hand Drill, And It Is Best To Use It With A Vise With Good Fixation Effect. Otherwise, Good Hole Opening Effect Will Not Be Achieved..
💡【Note】 The Drilling Process Needs To Be Kept Vertical And It Is Recommended That A Tool Such As A Vise Be Used To Keep The Material Stable So That A Smooth, Accurately Sized Hole Can Be Obtained. Set Slow Drilling Speed Till The Drill Bit Is Completely Located, Then Gradually Accelerate Speed. The Rotational Speed Is Controlled At 2200~2500Rpm For Better Effect..
💡【Widely Applications】 The Forstner Hole Saw Is Perfect For Wood,Plastic,Plywood,Solid Wood Boards,Mdf,Plastics,Furniture,Door Hinge,Desk,Etc.Note: Can Not Drill Metal And Non-Ferrous Metal..
💡【Super Accurate】We Use A Fully Automated Production Line, The Product Accuracy Is Up To 99%, The Error Of Drilling Holes Is Within 0.1Mm, It Is A Good Choice For High Precision Drilling Work..
💡【High Quality】Positioning Drills And Blades Are Made Of Yg8, Hardness ≥ 91Hra, Bending Strength Up To 2200N/Cm2, Resharpenable. The Shank Rod Is Made Of No. 45 Steel, Heat-Resistant And Corrosion-Resistant. After Quenching, The Hardness Is Extremely High, Effectively Avoiding Shank Bending During Use..
Features
- Product Size Drilling diameter 48mm | 1-7/8", Round Shank Dia.: 10mm | 2/5", Drilling depth: 60mm | 2-3/8", Total length: 94mm | 3-11/16".
- High Quality Positioning drills and blades are made of YG8, hardness 91HRA, bending strength up to 2200N/cm2, resharpenable. The shank rod is made of No. 45 steel, heat-resistant and corrosion-resistant. After quenching, the hardness is extremely high, effectively avoiding shank bending during use.
- 2.00mm Super Thick Blade Adopts industrial grade 2.0mm thickness YG8 blade, which extends the service life by 10 times compared to 1.3mm thick blade.
- Super Accurate We use a fully automated production line, the product accuracy is up to 99%, the error of drilling holes is within 0.1mm, it is a good choice for high precision drilling work.
- Note The drilling process needs to be kept vertical and it is recommended that a tool such as a vise be used to keep the material stable so that a smooth, accurately sized hole can be obtained. Set slow drilling speed till the drill bit is completely located, then gradually accelerate speed. The rotational speed is controlled at 2200~2500RPM for better effect.
- Widely Applications The Forstner hole saw is perfect for wood,plastic,plywood,solid wood boards,MDF,plastics,furniture,door hinge,desk,etc.Note: Can not drill metal and non-ferrous metal.
- Warm Tips For large-size Forstner drill bits ( 60mm), it is best to use machines with good fixation performance for drilling operations, such as drill presses, bench drills, vertical drill presses and vertical electric drills, etc. If you must use a hand electric drill to operate , be sure to use a high-power electric hand drill, and it is best to use it with a vise with good fixation effect. Otherwise, good hole opening effect will not be achieved.
- See more on Amazon...
Brand: Mollom | Manufacturer: Mollom
See On Amazon #19
ASNOMY Carbide Forstner Drill Bit, 2-3/8Inch Upgrade 3-Cutter Forstner Bit for Hard Wood, Wood Drilling Hole Saw Set Woodworking Hinge Cutter Tool Kits for Wood Plastic Plywood
Asin: B0C2TJMQXX
【Upgrade 3-Cutter Design】This Tct (Tungsten Carbide Tipped Cutters)Forstner Bit Designed With 3Pcs Cutting Cutter, Making It Sharper And More Durable Than Ordinary Forstner Drill Bits. Perfect For Hard Wood, Can Drill Precise Flat Bottom Holes With No Chipping In Hard Wood Or Soft Wood.(Drilling Depth Up To 60Mm).
【Warm Tips】The Smaller Diameters Forstner Drill Bit Can Be Used Under A Normal Handheld Drill, But Since We Are All Large-Size Forstner Drill Bit, It Is Best To Use Machines With Good Fixing Performance For Drilling Operations, Such As Drilling Machines, Bench Drills, Vertical Drilling Machines And Vertical Electric Drills, Etc., If You Must To Operate With A Hand Electric Drill, It Is Best To Use It Together With A Vise With Good Fixing Effect..
【Widely Applications】Can Be Used For Drilling Holes On Wood And Plastic Products, Furniture, Door Hinge, Desk. Used On Cutting Wood, Plywood, Solid Wood Boards, Mdf, Plastics, Etc..
【Size】Drilling Diameter：2-3/8Inch(60Mm), Hex Shank Dia.: 2/5Inch(10Mm) , Drilling Depth: 2-3/8Inch (60Mm), Total Length: 90Mm..
Features
- Top Quality Made from high quality Tungsten Carbide Tipped Cutters, solid hardened steel body, ensuring its high hardness, rust proof, sharp and durable
- Size Drilling diameter 2-3/8Inch(60mm), Hex Shank Dia.: 2/5Inch(10mm) , Drilling depth: 2-3/8Inch (60mm), Total length: 90mm.
- Upgrade 3-Cutter Design This TCT (Tungsten Carbide Tipped Cutters)Forstner bit designed with 3pcs cutting Cutter, making it sharper and more durable than ordinary forstner drill bits. Perfect for hard wood, can drill precise flat bottom holes with no chipping in Hard Wood or soft wood.(drilling depth up to 60mm)
- Widely Applications Can be used for drilling holes on wood and plastic products, furniture, door hinge, desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, etc.
- Warm Tips The smaller diameters Forstner Drill Bit can be used under a normal handheld drill, But since we are all large-size Forstner Drill bit, it is best to use machines with good fixing performance for drilling operations, such as drilling machines, bench drills, vertical drilling machines and vertical electric drills, etc., if you must To operate with a hand electric drill, it is best to use it together with a vise with good fixing effect.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon
Looking For Something Else?
Search