Power Feed Z-Axis for Milling Machine 450 in-lb Torque, 0-200RPM, 110V, Power Feed Milling Machine for Bridgeport and Some Knee Type Mills with a 5/8" Diameter Shaft on the End
Asin: B0CXSZLH1H | Model: 170332-LTMHE-1 | PartNumber: 170332-LTMHE-1 | Ean: 0840366481057 | UPC: 840366481057
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Flexible Operation】-You Can Set This Power Feed To Work At Automatic Constant Speed To Free Your Hands Or Work By Manually Adjusting The Speed Control Knob To Do More Precise Milling Work.And This Multifunctional Milling Machine Power Feed Can Work With Excellent Speed Control In The Entire Range According To Your Needs..
【Wide Use】-This Power Feed Fits Some Milling Machines Like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, Etc. Fits Some Vertical Knee Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft On The End. Note: Please Make Sure Yours Is The Typical Bridgeport Type As Mentioned Above..
【High Work Efficience】-This Power Feed Adopts High Precise Gleason Spiral Bevel Gear With Advantages Of Stable Transmission Ratio, High Transmission Efficiency And Low Transmission Noise. If The Tool Collides With The Workpiece Or Reverses Instantaneously, The Special Safety Device Protects The Transmission Plastic Gear And Electronic Parts From Damage..
【Ergonomical Design】-This Power Feed For Milling Machine Has The Small Size, Size: 7*3.5*12.8 Inch, Weight: 8.27Lbs. Easy To Install, And Ergonomically Designed. Installed On The Machine Tool, It Can Provide Stable Power To The Machine Tool And Improve Work Efficiency..
Features
- Model Parameters -Model type: Z-Axis power feed, Power Parameter: 90Watt, 110V input voltage, 50/60Hz, single phase; Rotate Speed: 0-200 RPM. Max Torque: 450in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min.
- Ergonomical Design -This power feed for milling machine has the small size, size: 7*3.5*12.8 inch, weight: 8.27lbs. Easy to install, and ergonomically designed. Installed on the machine tool, it can provide stable power to the machine tool and improve work efficiency.
- Flexible Operation -You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs.
- High Work Efficience -This power feed adopts high precise Gleason Spiral Bevel Gear with advantages of stable transmission ratio, high transmission efficiency and low transmission noise. If the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
- Wide Use -This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. Fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Note: Please make sure yours is the typical Bridgeport type as mentioned above.
- See more on Amazon...
Brand: FAHKNS | Manufacturer: FAHKNS
See On Amazon Similar To Power Feed ZAxis for Milling
#1
Grizzly Industrial G0757-9" x 39" 2 HP Horizontal/Vertical Mill with Power Feed
Asin: B0121UMA86 | Model: G0757 | PartNumber: G0757 | Ean: 0690550337000 | UPC: 690550337000
Spindle Taper: R-8.
Max. Distance Spindle To Table: 14-1/2".
Max. Distance Spindle To Column: 26-3/4".
Horizontal Spindle Motor: 2 Hp, 220V, Single-Phase.
Features
- Vertical spindle motor: 3 HP, 220V, Single-phase
- Horizontal spindle motor: 2 HP, 220V, Single-phase
- Spindle taper: R-8
- Max. distance spindle to column: 26-3/4
- Max. distance spindle to table: 14-1/2
- See more on Amazon...
Brand: Grizzly Industrial | Manufacturer: Grizzly
Dimensions: 45.00 x 53.00 x 88.00 inches | Weight: 1998.00 Pounds
See On Amazon #2
FoxAlien Masuter Pro CNC Router Machine, Upgraded 3-Axis Engraving All-Metal Milling Machine for Wood Acrylic MDF Nylon Carving Cutting
Asin: B09ZTYGGTJ | Model: Masuter Pro | PartNumber: Masuter Pro
Compatibility Upgrade: Masuter Pro Includes 2 Spindle Clamps: 52Mm & 65Mm. The 52Mm Clamp Can Accommodate The 60W Spindle, 300W Spindle And The Foxalien 20W/40W Modules. The 65Mm Clamp Is For Customized Upgrade, Such As 65Mm Router, 1.5Kw Spindle, Etc. It Also Supports The 69Mm Spindle Clamp, Please Buy Separately..
Large Engraving Area: The Active Working Area Is 15.75” X 15.75” X 2.36” (400 X 400 X 60Mm). It Is Large Enough For Daily Woodworking. It Supports Extension Kit To Enlarge The Working Area. It Supports Entension Kit (B0bhh3y8x2)..
Assembly Upgrade: Main Parts Are Pre-Assembled, And The Part Of The Wires Are Pre-Wired To The Controller Box. A Detailed Assembly Guide Is Included. We Provide Step By Step Assembly Manual.It Takes Only 10-15 Minutes To Fully Assemble..
Upgraded Controller Box: Compact Controller Box Desgin. The Emergency Stop Button And Home Button Are More Easily And More Convenient To Access. The Control Box Is Also Dust-Proof For Easy Maintenance..
Features
- Structure Upgrade: Masuter Pro is an All-Aluminum CNC router machine. The Z-axis uses Linear Rail instead of rods and T8 lead screw, this greatly improves the stability and accuracy.
- Upgraded Controller Box: Compact controller box desgin. The emergency stop button and home button are more easily and more convenient to access. The control box is also dust-proof for easy maintenance.
- Compatibility Upgrade: Masuter Pro includes 2 spindle clamps: 52mm & 65mm. The 52mm clamp can accommodate the 60W spindle, 300W spindle and the FoxAlien 20W/40W modules. The 65mm clamp is for customized upgrade, such as 65mm router, 1.5KW spindle, etc. It also supports the 69mm spindle clamp, please buy separately.
- Assembly Upgrade: Main parts are pre-assembled, and the part of the wires are pre-wired to the controller box. A detailed assembly guide is included. We provide step by step assembly manual.It takes only 10-15 minutes to fully assemble.
- Large Engraving Area: The active working area is 15.75 x 15.75 x 2.36 (400 x 400 x 60mm). It is large enough for daily woodworking. It supports extension kit to enlarge the working area. It supports entension kit (B0BHH3Y8X2).
- See more on Amazon...
Brand: FoxAlien | Manufacturer: FoxAlien
Dimensions: 12.60 x 25.98 x 25.98 inches | Weight: 28.66 Pounds
Warranty: 1 year manufacturer warranty
See On Amazon #3
Genmitsu CNC Router Machine Offline Control Module, Dial Design for Offline and 4-Axis Control Genmitsu 4040-PRO, 4040 Reno
Asin: B0C582HQ6Z | Model: Offline Controller | PartNumber: Offline Controller | Ean: 0816550027172 | UPC: 816550027172
No Need To Connect A Computer: Easily Toggle Your Spindle On And Off And Process The Z-Axis Tool Setting. Get A Break From Complicated Control Systems And Say Hello To Effortless Precision With This User-Friendly Control Module..
Enhanced Portability: The Compact And Lightweight Design Of An Offline Controller Makes It Effortless To Carry And Use In Different Locations, While Also Saving Valuable Workspace..
Easy File Access And Transferring For Quick And Efficient Project Setup: Get Your Projects Up And Running In No Time With Easy File Access And Transfer..
Switch To The 4-Axis Mode For Complete Control Over Every Aspect Of Your Cnc Router Machine: Elevate Your Cnc Routing Game With The Ability To Switch To The 4-Axis Mode For Even Greater Creativity And Control. (Recommended To Order The 4Th Axis Rotary Kit Together For A Bundle Price!).
Features
- Designed exclusively for use with the Genmitsu 4040-PRO/4040 Reno: Maximize the potential of your 4040-PRO or 4040 Reno with this specially designed control module.
- Switch to the 4-axis mode for complete control over every aspect of your CNC Router Machine: Elevate your CNC routing game with the ability to switch to the 4-axis mode for even greater creativity and control. (Recommended to order the 4th axis rotary kit together for a bundle price!)
- No need to connect a computer: Easily toggle your spindle on and off and process the Z-Axis tool setting. Get a break from complicated control systems and say hello to effortless precision with this user-friendly control module.
- Easy file access and transferring for quick and efficient project setup: Get your projects up and running in no time with easy file access and transfer.
- Enhanced Portability: The compact and lightweight design of an offline controller makes it effortless to carry and use in different locations, while also saving valuable workspace.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Weight: 3.52 ounces
See On Amazon #4
AnoleX CNC Router Machine 3030-Evo Pro, All-Metal XYZ Axis Dual Steel Linear Guides with 300W Spindle, Z-Probe, Limit Switches, E-Stop, ideal for Aluminum, Copper, Stainless steel, Wood, Acrylic, MDF
Asin: B0C9DFZC9S | Model: 3030-Evo Pro | PartNumber: 3030-Evo Pro
【Increased Precision And Stability】 The Xyz Axes Of Cnc 3030 Evo Pro Feature Dual Linear Guide Rails And T8 Lead Screws, Fixed Gantry Structure That Significantly Reduces Errors Caused By Shaking And Tilting. The Rigidity Is Stronger, Enabling The Machine To Cut Metal Materials Like Steel, Aluminum, And Copper, Wood And Acrylic Etc..
【Easy Assembly And Suppor】With Pre-Assembled Main Parts And A Clear Cable Management System, Cnc 3030 Evo Pro Is Easy To Assemble. Additionally, A Paper User Manual And Assembly Video Ensure Easy Setup. Our Dedicated Customer Support Team Will Respond To Any Query Within 24 Hours..
【Complete Functions】Desktop Cnc Router 3030 Evo Pro Comes With A Variety Of Accessories Including Xyz Axis Double Limit Switch And Home, Emergency Stop Switch, Z Probe, Er11-1/8" Chuck, And More. It Supports Grbl Software For Various Operating Systems Like Windows, Linux And Mac..
【Upgraded Stepper Motor】 Cnc Machine 3030-Evo Pro Features A Powerful Nema 17 Stepper Motor, With Increased Torque From 420Mn.M To 650Mn.M. This Results In Faster Cutting Times And Fewer Errors, Making It Possible To Work With Harder Materials - Not Just Wood And Similar Substances..
Features
- Upgraded Y-Axis Base CNC router 3030-Evo Pro features an upgraded Y-axis base from the CNC 3020-Evo, with double linear guide rails and a 300mm stroke.
- Upgraded Stepper Motor CNC machine 3030-Evo Pro features a powerful Nema 17 stepper motor, with increased torque from 420mN.M to 650mN.M. This results in faster cutting times and fewer errors, making it possible to work with harder materials - not just wood and similar substances.
- Increased Precision and Stability The XYZ axes of CNC 3030 Evo Pro feature dual linear guide rails and T8 lead screws, fixed gantry structure that significantly reduces errors caused by shaking and tilting. The rigidity is stronger, enabling the machine to cut metal materials like steel, aluminum, and copper, wood and acrylic etc.
- Complete Functions Desktop CNC router 3030 Evo Pro comes with a variety of accessories including XYZ axis double limit switch and Home, emergency stop switch, Z probe, ER11-1/8 chuck, and more. It supports grbl software for various operating systems like Windows, Linux and Mac.
- Easy Assembly and Suppor With pre-assembled main parts and a clear cable management system, CNC 3030 Evo Pro is easy to assemble. Additionally, a paper user manual and assembly video ensure easy setup. Our dedicated customer support team will respond to any query within 24 hours.
- See more on Amazon...
Brand: AnoleX | Manufacturer: AnoleX
Dimensions: 11.81 x 11.30 x 0.01 inches
See On Amazon #5
GPOAS Power Feed X-Axis for Milling Machine 450 in-lb Torque, 0-200RPM Table Milling Machine Power Feed 110V,for Bridgeport and Some Knee Type Mills with a 5/8" Diameter Shaft on the End
Asin: B09MK69921 | Model: 164137-5326-1838293381 | PartNumber: 164137-5326-1838293381
【Stable And Efficient】This Power Feed Adopts Gleason Spiral Bevel Gear With Advantages Of Stable Transmission Ratio,Low Transmission Noise,High Transmission Efficiency And High Bearing Capacity.And When Fast Transmission, If The Tool Collides With The Workpiece Or Reverses Instantaneously, The Special Safety Device Protects The Transmission Plastic Gear And Electronic Parts From Damage..
【Wide Application】This Milling Table Power Feed Fits Some Vertical Knee Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft On The End,But It Will Not Fit Mills With A Different Mounting Pattern Or Different Sized Leadscrews Like Powermatic And Some Other Odd Sized Machines, So Please Make Sure Yours Is The Typical Bridgeport Type As Mentioned Above.Note:Any Shipping Damage,Using Problems Or Missing Accessories, Please Feel Free To Cantact Us, We Will Solve Them For You..
【Automatic And Manual Control】You Can Set This Power Feed To Work At Automatic Constant Speed To Free Your Hands Or Work By Manually Adjusting The Speed Control Knob To Do More Precise Milling Work.And This Multifunctional Milling Machine Power Feed Can Work With Excellent Speed Control In The Entire Range According To Your Needs..
【Portable And Easy To Install】This Power Feed For Milling Machine Is Compact And Portable.Weight: 3.75Kg/8.27Lbs, Size: 7*3.5*12.8 Inch. And Whether It Is For A Novice Or A Skilled Operator, It Is Very Easy To Install This Power Feed According To The Instruction And Online Video Or By Yourself.After-Sales:You Will Get Worry-Free 18-Month Warranty And Lifelong Technical Guidance..
Features
- BASIC PARAMETERS GPOAS X-Axis power feed is made of aluminuml;Power Parameter:90Watt,110V input voltage,50/60Hz,single phase;Rotate Speed:0-200 RPM.Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.
- PORTABLE AND EASY TO INSTALL This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lbs, Size: 7*3.5*12.8 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance.
- STABLE AND EFFICIENT This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
- AUTOMATIC AND MANUAL CONTROL You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs.
- WIDE APPLICATION This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.NOTE:Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you.
- See more on Amazon...
Brand: GPOAS | Manufacturer: GPOAS
Dimensions: 12.80 x 6.97 x 3.46 inches
See On Amazon #6
Vevor Al-310S Power Feed X-Axis 450 in-lb Torque,Power Feed Milling Machine 0-200PRM, Power Table Feed Mill 110V,for Bridgeport and Similar Knee Type Milling Machines - Amazon.com
Asin: B074QPRTQL | Model: Power Feed for Milling Machine | PartNumber: Power Feed for Milling Machine | Ean: 0719034836089 | UPC: 719034836089
Small Volume And Easy Installation Power Feed, Jog Function Operates At Any Feed Speed; Excellent Speed Control In The Entire Range.
Safety Feature To Protect Transmission Gear And Electronic Components, As To Meet The Requirements Of Ergonomics.The Two Gears Of This Power Table Feed Will Not Mesh And Wear At The Same Spot, This Not Only Increases Durability And Longevity But Even Reduces Noise Over Time..
Noiseless Direction Changes, Better Surface Smoothness And Power Table Feed Won't Vibrate Or Strain In Low Speed.
Rotate Speed: 0-200 Rpm; Max Torque: 450 In-Lb; Max Feed Rate: 650Mm/Min; Max Return Speed: 850Mm/Min.
Features
- Model: Al-310S; Type: X traverse; Voltage: 110V, 50/60Hz
- Rotate speed: 0-200 RPM; Max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min
- Small volume and easy installation power feed, jog function operates at any feed speed; Excellent speed control in the entire range
- Noiseless direction changes, better surface smoothness and power table feed won't vibrate or strain in low speed
- Safety feature to protect transmission gear and electronic components, as to meet the requirements of ergonomics.The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.
- See more on Amazon...
Brand: Mophorn | Manufacturer: Mophorn
See On Amazon #7
FAHKNS X-Axis Power Feed for Milling Machine 450 in-lb Torque 0-200RPM Table Milling Machine Power Feeder 110V for Bridgeport and Similar Knee Type Milling Machines(5/8" Diameter Shaft)
Asin: B0BWY6931H | Model: 164137-FAH-DF | PartNumber: 164137-FAH-DF | Ean: 0840366400409 | UPC: 840366400409
【Convient To Install】This Power Feed For Milling Machine Has The Small Size, Size: 7*3.5*12.8 Inch, Weight: 3.75Kg/8.27Lbs. Easy To Install, It Can Provide Stable Power Improve Work Efficiency..
【Flexible Speed Adjustment】This Power Feeder Unit Has 2 Different Ways Of Adjusting The Speed: Manual And Automatic. You Can Not Only Adjust The Speed By Manually Adjusting The Control Button, But Also Set The Device To Automatic Constant Speed, Freeing Your Hands And Making It Easier For You..
【High Transmission Efficiency】This Power Feed Built In Gleason Spiral Bevel Gear With Advantages Of Stable Transmission Ratio, High Transmission Efficiency And Low Transmission Noise..
【Ergonomic Design】Our X-Axis Power Feed Machine Adopt Ergonomic Design, When The Tool Collides With The Workpiece Or Reverses Instantaneously, The Special Safety Device Protects The Transmission Plastic Gear And Electronic Parts From Damage..
Features
- Suitable Models This power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Model: AL-460, Powe: 90W, 110V input voltage, 50/60Hz, single phase; Rotate Speed:0-200 RPM.
- Ergonomic Design Our X-Axis power feed machine adopt ergonomic design, when the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
- Convient to Install This power feed for milling machine has the small size, size: 7*3.5*12.8 inch, weight: 3.75kg/8.27lbs. Easy to install, it can provide stable power improve work efficiency.
- High Transmission Efficiency This power feed built in Gleason Spiral Bevel Gear with advantages of stable transmission ratio, high transmission efficiency and low transmission noise.
- Flexible speed adjustment This power feeder unit has 2 different ways of adjusting the speed: manual and automatic. You can not only adjust the speed by manually adjusting the control button, but also set the device to automatic constant speed, freeing your hands and making it easier for you.
- See more on Amazon...
Brand: FAHKNS | Manufacturer: FAHKAS
See On Amazon #8
Genmitsu 3030-PROVer MAX CNC Router Machine with Linear Guide & Ball Screw Motion, Achieve 0.05mm Accuracy for High Precision Metal Aluminum Copper Acrylic Engraving, Supports 4th Axis Rotary Kit
Asin: B0CH9KCQ6C | Model: 3030 | PartNumber: 3030 | Ean: 0816550027240 | UPC: 816550027240
Assemble Down To 10 Min: Easy To Assemble Indexed Parts With The Y-Axis Enables Easy Alignment And Balance During Assembly That Includes A Dust-Proof Cover For Each Linear Guide And Ball Screw With The X And Y Axis, Simplifying Maintenance..
Expand Your Horizons: Unlock The Potential Of 3D Rotary Carving With The 3030-Prover Max's Support For A 4Th Axis Module, Allowing You To Create Captivating Designs From Different Angles And Positions..
Enhanced Control At Your Fingertips: The New Single Knob Offline Controller Puts The Power In Your Hands, Providing Precise Control Over Your Work With An Easy To Access Emergency Stop Button For Added Safety..
Precision Refined: Experience Exceptional Accuracy Down To 0.05Mm, Made Possible By The Dual Linear Guides And Ball Screws Integrated Into The X, Y, And Z Axis Of This Cutting-Edge Cnc Machine..
Features
- Carving Metal with Ease: Master your metalworking workflow with the 3030-PROVer MAX Desktop CNC Router, effortlessly cut 2mm thick aluminum stock along with other materials and thicknesses right from your desktop.
- Precision Refined: Experience exceptional accuracy down to 0.05mm, made possible by the dual linear guides and ball screws integrated into the X, Y, and Z axis of this cutting-edge CNC machine.
- Assemble down to 10 min: Easy to assemble indexed parts with the Y-axis enables easy alignment and balance during assembly that includes a dust-proof cover for each linear guide and ball screw with the X and Y axis, simplifying maintenance.
- Enhanced Control at Your Fingertips: The new single knob offline controller puts the power in your hands, providing precise control over your work with an easy to access emergency stop button for added safety.
- Expand Your Horizons: Unlock the potential of 3D rotary carving with the 3030-PROVer MAX's support for a 4th axis module, allowing you to create captivating designs from different angles and positions.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 16.22 x 20.59 x 20.59 inches
See On Amazon #9
BobsCNC Quantum CNC Router Kit with the Makita Router Included (24" x 24" cutting area and 3.8" Z travel)
Asin: B07H2QH17J | Model: Quantum CNC Router Kit | PartNumber: Quantum CNC Router Kit | Ean: 0731236231356 | UPC: 731236231356
Nema 17 Stepper Motors And Home Switches On All Axes With A Self-Squaring Gantry..
Designed To Use Grbl1.1 Firmware On The Arduino Uno With Repeatability Of 0.002” To 0.004”..
Assembly Required.
1/2” Mdf, With Aluminum T-Slot Spoilboard And Includes The Makita Rt0701c Variable Speed Router..
Gt2 9Mm Belt Drive On X And Y-Axis And Tr8 Acme Rod Mounted With An Acme Nut On The Z-Axis..
Features
- A rigid laser cut 5-Ply Baltic Birch frame with SG20U supported rail system.
- GT2 9mm belt drive on X and Y-axis and Tr8 Acme Rod mounted with an ACME Nut on the Z-axis.
- NEMA 17 Stepper Motors and Home switches on all axes with a Self-Squaring Gantry.
- 1/2 MDF, with aluminum T-Slot Spoilboard and includes the Makita RT0701C Variable Speed Router.
- Designed to use GRBL1.1 firmware on the Arduino Uno with repeatability of 0.002 to 0.004 .
- Assembly Required
- See more on Amazon...
Brand: BobsCNC | Manufacturer: BobsCNC,LLC
Dimensions: 10.00 x 36.00 x 12.00 inches | Weight: 42.00 Pounds
Warranty: 30 Days return, 90 days parts
See On Amazon #10
GPOAS AL-460 Power Feed Z-Axis for Milling Machine 460 in-lb Torque, 0-200RPM Table Milling Machine Power Feed 110V,for Bridgeport and Other Knee Type Mills with a 5/8" Diameter Shaft on the End
Asin: B09NPJGGYT | Model: 164137-5326-1838293381 | PartNumber: 164137-5326-1838293381 | Ean: 0768492548942 | UPC: 768492548942
【Stable And Efficient】This Power Feed Adopts Gleason Spiral Bevel Gear With Advantages Of Stable Transmission Ratio,Low Transmission Noise,High Transmission Efficiency And High Bearing Capacity.And When Fast Transmission, If The Tool Collides With The Workpiece Or Reverses Instantaneously, The Special Safety Device Protects The Transmission Plastic Gear And Electronic Parts From Damage..
【Wide Application】This Milling Table Power Feed Fits Some Vertical Knee Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft On The End,But It Will Not Fit Mills With A Different Mounting Pattern Or Different Sized Leadscrews Like Powermatic And Some Other Odd Sized Machines, So Please Make Sure Yours Is The Typical Bridgeport Type As Mentioned Above.Note:Any Shipping Damage,Using Problems Or Missing Accessories, Please Feel Free To Cantact Us, We Will Solve Them For You..
【Automatic And Manual Control】You Can Set This Power Feed To Work At Automatic Constant Speed To Free Your Hands Or Work By Manually Adjusting The Speed Control Knob To Do More Precise Milling Work.And This Multifunctional Milling Machine Power Feed Can Work With Excellent Speed Control In The Entire Range According To Your Needs..
【Portable And Easy To Install】This Power Feed For Milling Machine Is Compact And Portable.Weight: 3.75Kg/8.27Lb, Size: 7*3.5*11.7Inch. And Whether It Is For A Novice Or A Skilled Operator, It Is Very Easy To Install This Power Feed According To The Instruction And Online Video Or By Yourself.After-Sales:You Will Get Worry-Free 18-Month Warranty And Lifelong Technical Guidance..
Features
- BASIC PARAMETERS GPOAS Z-Axis power feed is made of aluminuml;Power Parameter:90Watt,110V input voltage,50/60Hz,single phase;Rotate Speed:0-200 RPM.Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.
- PORTABLE AND EASY TO INSTALL This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lb, Size: 7*3.5*11.7inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance.
- STABLE AND EFFICIENT This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
- AUTOMATIC AND MANUAL CONTROL You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs.
- WIDE APPLICATION This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.NOTE:Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you.
- See more on Amazon...
Brand: GPOAS | Manufacturer: GPOAS
Dimensions: 8.00 x 12.80 x 11.41 inches | Weight: 8.27 pounds
See On Amazon #11
RATTMMOTOR CNC 3018 PRO MAX CNC Router Machine Kit DIY Mini CNC Wood Router Machine 3 Axis GRBL Control Engraver Milling Cutting Machine Working Area 300x180x45mm for Plastic/Wood/Acrylic/PVC/PCB
Asin: B08PBDRS56 | Model: 3018Pro-M+ | PartNumber: 3018Pro-M+ | Ean: 0619191754908 | UPC: 619191754908
✅【Simple Assembly For Use】This Mini Cnc Router Machine Kit Is Mainly Designed For Diy Carving Enthusiasts/Beginners, Easily Assembled And Opertated, Coming With A Paper Manual And Usb Drive Of All The Files..
✅【Applicable Engraving Material】Cnc 3018 Pro Max Machine Can Not Only Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And So On, But Also Soft Metal Like Copper, Aluminum And The Similar Materials. Howerever, Harder Materials Cannot Be Engraved Such As Glass, Hard Metal, Jade, Ect..
✅【【Update Grbl1.1 Control Board】 ①The Grbl Board Supports Emergency Stop And X/Y/Z Axis Limit Functions, Which Can Be Used Together With The Emergency Stop Button And Limit Switch On The Engraving Machine To Ensure A Safe And Simple Working Environment. ②Other Functions And Features Such As: Maximum Support For 20000Rpm Spindle, Tool Setting(Probe) , Offline Controller, With A Power Switch Button And A Silent Fan Cooling..
✅【Material And Dimensions】The Fixed External Frame Is Made Of Black Injection Molding Material, Working Table Is Aluminum Alloy Material. Screw Rods Uses Stainless Steel Quality. It Can Able To Engraving In Plane By Moving X/Y/Zaxis. High Precision And Durability And Good Appearance..
Features
- Upgrade Version CNC 3018 PRO MAX Frame size: 42x35x27CM (16.53 x 13.78 x 10.63 ). Working area:18x10x4.5CM(11.8 x 7.1 x 1.8 ). Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min. Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
- Material and Dimensions The fixed external frame is made of black injection molding material, working table is aluminum alloy material. Screw rods uses stainless steel quality. It can able to engraving in plane by moving X/Y/Zaxis. High precision and durability and good appearance.
- Simple Assembly for Use This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB drive of all the files.
- Update GRBL1.1 Control Board The GRBL board supports emergency stop and X/Y/Z axis limit functions, which can be used together with the emergency stop button and limit switch on the engraving machine to ensure a safe and simple working environment. Other functions and features such as: maximum support for 20000RPM spindle, tool setting(probe) , offline controller, with a power switch button and a silent fan cooling.
- Applicable Engraving Material CNC 3018 PRO MAX machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 10.63 x 16.54 x 16.54 inches
See On Amazon #12
GCCSJ Power Feed Z-Axis for Milling Machine 460 in-lb Torque, 0-200RPM Table Milling Machine Power Feed 110V, for Bridgeport and Some Knee Type Mills with a 5/8" Diameter Shaft on the End
Asin: B0BTDFBKDD
Flexible Speed Control: This Multifunctional Milling Machine Power Feed Can Work With Different Speed Control According To Your Needs..
After-Sales Secive: You Will Get Worry-Free 18-Month Warranty And Lifelong Technical Guidance. Any Shipping Damage,Using Problems Or Missing Accessories, Please Feel Free To Cantact Us, We Will Solve Them For You..
Wide Compatiable: This Milling Table Power Feed Fits Some Vertical Knee Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft On The End..
Excellent Transmission Effect: This Power Feed Adopts Gleason Spiral Bevel Gear, Stable Transmission Ratio And High Transmission Efficiency. And When Fast Transmission, It Prevents Collisions With Workpieces And Protects Transmission Plastic Gears And Electronic Parts From Damage..
Features
- Main Parameters: Power: 90W, Voltage: 110V, 60Hz, Rotate Speed: 200 RPM, Maximum Torque: 460 in-lb, Max feed rate: 650mm/min; Max return speed: 850mm/min.
- Excellent Transmission Effect: This power feed adopts gleason spiral bevel gear, stable transmission ratio and high transmission efficiency. And when fast transmission, It prevents collisions with workpieces and protects transmission plastic gears and electronic parts from damage.
- Flexible Speed Control: This multifunctional milling machine power feed can work with different speed control according to your needs.
- Wide Compatiable: This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end.
- After-sales Secive: You will get worry-free 18-month warranty and lifelong technical guidance. Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you.
- See more on Amazon...
Brand: GCCSJ | Manufacturer: GCCSJ
Dimensions: 3.56 x 11.88 x 7.20 inches
See On Amazon #13
RIEDHOFF Z-Axis Power Feed for Power Milling Machines, [450 LB Torque], 110V, 0-200PRM Adjustable Speed Table Milling Machine Power Feed, Perfect for Bridgeport and Similar Knee-Type Mills
Asin: B0CGV517G2 | Model: PHO_0YKIIRPW | PartNumber: PHO_0YKIIRPW | Ean: 0196336723727 | UPC: 196336723727
【Efficient And Stable Operation】The Power Feed Features A Gleason Spiral Bevel Gear, Offering A Stable Transmission Ratio, Low Transmission Noise, High Transmission Efficiency, And High Bearing Capacity. This Ensures Smooth And Efficient Operation, Even During Fast Transmission. Additionally, A Special Safety Device Protects The Transmission Plastic Gear And Electronic Parts From Damage In Case Of Collisions Or Instantaneous Reversals..
【Reliable Power Parameters】The Power Feed Operates On 95 Watts With An Input Voltage Of 110V. It Functions On A 50/60Hz Single-Phase Power Supply. The Rotate Speed Is Adjustable From 0 To 200 Rpm, With An Impressive Maximum Torque Of 450In-Lb. It Also Offers A Maximum Feed Rate Of 650Mm/Min And A Maximum Return Speed Of 850Mm/Min, Providing Efficient And Precise Milling Capabilities..
【Portable And Easy To Install】This Power Feed For Milling Machine Is Compact And Portable.Weight: 5Kg/11Lbs, Size: 7*4.5*11.5 Inch. And Whether It Is For A Novice Or A Skilled Operator, It Is Very Easy To Install This Power Feed According To The Instruction And Online Video Or By Yourself..
【Automatic And Manual Control】With This Power Feed, You Have The Flexibility To Work In Automatic Or Manual Control Mode. Set It To Automatic Constant Speed For Hands-Free Operation, Or Manually Adjust The Speed Control Knob For More Precise Milling Work. This Allows You To Tailor The Power Feed's Performance To Your Specific Needs..
Features
- Type Z-Axis Z-Axis power feed is made of aluminuml;Power Parameter: 95Watt,110V input voltage,50/60Hz,single phase;Rotate Speed:0-200 RPM.Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min.
- Automatic and Manual Control With this power feed, you have the flexibility to work in automatic or manual control mode. Set it to automatic constant speed for hands-free operation, or manually adjust the speed control knob for more precise milling work. This allows you to tailor the power feed's performance to your specific needs.
- Efficient and Stable Operation The power feed features a Gleason Spiral Bevel Gear, offering a stable transmission ratio, low transmission noise, high transmission efficiency, and high bearing capacity. This ensures smooth and efficient operation, even during fast transmission. Additionally, a special safety device protects the transmission plastic gear and electronic parts from damage in case of collisions or instantaneous reversals.
- PORTABLE AND EASY TO INSTALL This power feed for milling machine is compact and portable.Weight: 5kg/11lbs, Size: 7*4.5*11.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.
- Reliable Power Parameters The power feed operates on 95 Watts with an input voltage of 110V. It functions on a 50/60Hz single-phase power supply. The rotate speed is adjustable from 0 to 200 RPM, with an impressive maximum torque of 450in-lb. It also offers a maximum feed rate of 650mm/min and a maximum return speed of 850mm/min, providing efficient and precise milling capabilities.
- See more on Amazon...
Brand: RIEDHOFF | Manufacturer: RIEDHOFF
Dimensions: 7.08 x 15.35 x 12.99 Inches
See On Amazon #14
GCCSJ Power Feed X-Axis for Milling Machine 450 in-lb Torque 0-200RPM Table Milling Machine Power Feed 110V
Asin: B0BTDBZ3WM
Flexible Speed Control: This Multifunctional Milling Machine Power Feed Can Work With Different Speed Control According To Your Needs..
After-Sales Secive: You Will Get Worry-Free 18-Month Warranty And Lifelong Technical Guidance. Any Shipping Damage,Using Problems Or Missing Accessories, Please Feel Free To Cantact Us, We Will Solve Them For You..
Wide Compatiable:This Milling Table Power Feed Fits Some Vertical Knee Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft On The End..
Excellent Transmission Effect: This Power Feed Adopts Gleason Spiral Bevel Gear, Stable Transmission Ratio And High Transmission Efficiency. And When Fast Transmission, It Prevents Collisions With Workpieces And Protects Transmission Plastic Gears And Electronic Parts From Damage..
Features
- Main Parameters: Power: 90W, Voltage: 110V, 60Hz, Rotate Speed: 200 RPM, Maximum Torque: 450 in-lb, Max feed rate: 650mm/min; Max return speed: 850mm/min.
- Excellent Transmission Effect: This power feed adopts gleason spiral bevel gear, stable transmission ratio and high transmission efficiency. And when fast transmission, It prevents collisions with workpieces and protects transmission plastic gears and electronic parts from damage.
- Flexible Speed Control: This multifunctional milling machine power feed can work with different speed control according to your needs.
- Wide Compatiable:This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end.
- After-sales Secive: You will get worry-free 18-month warranty and lifelong technical guidance. Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you.
- See more on Amazon...
Brand: GCCSJ | Manufacturer: GCCSJ
See On Amazon #15
CNCTOPBAOS 3 Axis 4540 500W CNC Router Engraving Machine with Aluminum Table/GRBL Touchscreen Offline Controller/Limit Switch/E-stop,Carving Milling Cutting Metal Wood Stainless Steel Acrylic PCB PVC
Asin: B0CMWW17J9 | Model: 4540 | PartNumber: 4540
♞【Touchscreen Offline Controller】Comes With A 2.8" Touchscreen Lcd Display That's Easy To Read And Use,You Can Control Your Cnc Without Pc.Just Put The Project You Need Inside That Sd Card,The Functions Of The Touch Screen Offline Controller Are The Same As The Computer's Control Software,And You Can Also Control Every Movement Of The Engraving Machine As If You Were Operating On Top Of The Engraving Machine..
♞【Wide Application】Can Engrave On Stainless Steel,Wood, Mdf, Carbon Fiber, Pcb, Pvc, Leather, Paper, Acrylic, Resin, Ceramic Products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum And So On.This Machine Can Both Carve And Cut.It Can Cut 8-12Mm (0.31"-0.47") Mdf And 5Mm (0.19") Thick Aluminum..
♞【Supported Software&Computer Systems】4540 Cnc Engraving Machine Is Compatible With Grbl Software/Candle And Supports Windows Xp/7/8/10 .The Grbl Control Software In Our Package Supports Nc, Ncc, Ngc, Tag And Other G Files.♞【Easy To Assemble】The Main Components Has Been Pre-Assembled And Can Be Simply Assembled In 15-30 Minutes..
♞【With Aluminum Table】Large Aluminum Working Table;Working Area:430*390*90Mm (16.93*15.39*3.54 Inches);Overall Size:650*532*320Mm (25.59*20.94*12.60 Inches);The Worktable Has An Accurate Scale Line,Which Is Convenient To Locate And Measure The Size Of The Engraving Material..
Features
- High Speed 500W Spindle The 4540 cnc engraving machine is equipped with 500W 48V 11000rpm spindle (with ER11 collet),which is more powerful and efficient,and can do a variety of drilling and carving operations on various materials such as big wood,can cut stainless steel,aluminum and other metals;Max.Movement Speed:5000mm/min;Speed range:0-11000rpm.
- With Aluminum Table Large Aluminum working table;Working area:430*390*90mm (16.93*15.39*3.54 inches);Overall Size:650*532*320mm (25.59*20.94*12.60 inches);The worktable has an accurate scale line,which is convenient to locate and measure the size of the engraving material.
- Touchscreen offline controller Comes with a 2.8 Touchscreen LCD Display that's easy to read and use,you can control your CNC without PC.Just put the project you need inside that SD card,the functions of the touch screen offline controller are the same as the computer's control software,and you can also control every movement of the engraving machine as if you were operating on top of the engraving machine.
- Supported Software&Computer Systems 4540 CNC engraving machine is compatible with GRBL software/Candle and supports Windows XP/7/8/10 .The GRBL Control Software in our package supports Nc, Ncc, Ngc, Tag and other G files. Easy to Assemble The main components has been pre-assembled and can be simply assembled in 15-30 minutes.
- Wide Application Can engrave on Stainless steel,Wood, MDF, Carbon fiber, PCB, PVC, Leather, Paper, Acrylic, Resin, Ceramic products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum and so on.This machine can both carve and cut.It can cut 8-12mm (0.31-0.47) MDF and 5mm (0.19) thick aluminum.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #16
VEVOR Z-Axis Power Feed for Milling Machine, 450 in-lb Torque, 0-200RPM Adjustable Rotate Speed 120V Power Table Feed Mill Feeder, for Bridgeport Some Knee Type Mills with a 5/8" End Shaft Diameter
Asin: B0CZLFVM64 | Model: AL-450 | PartNumber: AL-450 | Ean: 0197988571810 | UPC: 197988571810
Highly Stable And Efficient: Featuring Gleason Spiral Bevel Gears, Our Power Table Feed Boasts Stable Transmission Ratios, Low Noise, High Transmission Efficiency, And High Load-Bearing Capacity. Plus, It Comes With A Special Security Device That Protects The Gearbox Plastic Gears, And Electronic Components From Damage In The Event Of Tool Collision Or Sudden Reversal During Rapid Transmission..
Designed For Z-Axis Direction: This Power Feed Woodworking Enables Smooth Movement In The Z-Axis Direction. Its Versatility Extends To Various Machines, Including Radial Milling Machines, Drilling And Boring Machines, Small Grinding Machines, And Specialized Machine Tools, Ensuring Stable Power Delivery Across A Wide Range Of Equipment..
Easy To Use, Manual Or Automatic: Our Power Feed Milling Machine Offers Two Different Speed Adjustment Modes: Manual And Automatic. With Manual Control Buttons, You Can Adjust The Speed As Needed. Alternatively, Set The Device To Automatic Constant Speed Mode For Hands-Free Operation, Making Your Milling Tasks A Breeze..
Infinitely Variable Speed Control: With The Continuously Variable Speed Knob, You Can Adjust The Speed According To Your Needs. Our Milling Machine Power Feed Offers A Rated Torque Of 450 In-Lb(50.7 Nm), A Maximum Speed Of 200 Rpm, A Maximum Feed Rate Of 965 Mm/Min, And A Maximum Return Speed Of 1385 Mm/Min..
Features
- Ultimate High-Compatibility Solution: Our power feed table mill Includes everything needed to mount on most knee-type mills with a 5/8'' end shaft diameter that shares the same installation pattern, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and others.
- Infinitely Variable Speed Control: With the continuously variable speed knob, you can adjust the speed according to your needs. Our milling machine power feed offers a rated torque of 450 in-lb(50.7 NM), a maximum speed of 200 RPM, a maximum feed rate of 965 mm/min, and a maximum return speed of 1385 mm/min.
- Highly Stable and Efficient: Featuring Gleason spiral bevel gears, our power table feed boasts stable transmission ratios, low noise, high transmission efficiency, and high load-bearing capacity. Plus, it comes with a special security device that protects the gearbox plastic gears, and electronic components from damage in the event of tool collision or sudden reversal during rapid transmission.
- Easy to Use, Manual or Automatic: Our power feed milling machine offers two different speed adjustment modes: manual and automatic. With manual control buttons, you can adjust the speed as needed. Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze.
- Designed for Z-axis Direction: This power feed woodworking enables smooth movement in the Z-axis direction. Its versatility extends to various machines, including radial milling machines, drilling and boring machines, small grinding machines, and specialized machine tools, ensuring stable power delivery across a wide range of equipment.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 9.45 x 8.27 x 4.72 inches | Weight: 12.57 pounds
See On Amazon #17
500W CNC Router Machine, MYSWEETY 3020 PLUS CNC Wood Router 3 Axis Desktop CNC Machine for Metal Wood Acrylic MDF with Limit Switches, Emergency-Stop, Working Area 300*200*73 mm(11.81*7.87*2.87 inch)
Asin: B0BMV9Y15Y
💡【Larger Working Area】: The Working Area Of The 3020-Plus Router Vs The 3018-Pro Is Larger, Increased To 300*200*73Mm(11.81*7.87*2.87Inch). Our Working Table With A Particular Appearance Has Precise Scale Lines And A Flat Working Surface, Convenient For You To Locate And Measure The Engraving Material Size. And The High Quality Emergency Stop And 6 Limit Switches For All-Around Protection Making It More Safe To Use.
💡【Package Included】: Comes With Everything You Need. It's: All Parts To Assemble The 3020 Plus Cnc Machine, Offline Controller, Z-Probe, Cnc Router Bits, Clamp, And More. This Is An Extremely Well-Built, Capable Machine, Works Fantastically Well. Also We Are Cnc Experts, If Any Questions, Please Contact Us As Soon As Possible!.
💡【Wide Compatibility & Easy To Assembly】: The Cnc Carving Machine Is Compatible With Grbl Software And Supports Windows Xp/7/8/10, Linux And Mac Os (A Bit More Complicated To Operate Compared To Windows). This Unit Is Pre-Assembled, It Was Easy To Assemble Out Of The Box With Concise Instructions.
💡【High Precision & Stability】: Without Any Plastic Parts. The Cnc Router Is Equipped With Solid Dual Steel Linear Guide Rails Which Are 12Mm Thick And Also Come With Bearing Slides And And T8 Lead Screws. All-Metal X-Z Axis Part, Up To 73Mm Of Vertical Travel, More Powerful Stepper Motor, All Of These Are Designed To Ensure The Movement Of The 3-Axis Faster And More Stable, Resulting In Improved Engraving Accuracy.
Features
- High Power Spindle & All-metal Body : This 3020 PLUS CNC machine is solidly built with all-metal body structure and upgraded 500W 52mm spindle with E11 collet, more powerful and higher efficiency, making it possible to cut stainless steel, aluminum and other metals
- High Precision & Stability : Without any plastic parts. The CNC router is equipped with solid dual steel linear guide rails which are 12mm thick and also come with bearing slides and and T8 lead screws. All-metal X-Z axis part, up to 73mm of vertical travel, more powerful stepper motor, all of these are designed to ensure the movement of the 3-axis faster and more stable, resulting in improved engraving accuracy
- Larger Working Area : The working area of the 3020-PLUS router vs the 3018-PRO is larger, increased to 300*200*73mm(11.81*7.87*2.87inch). Our working table with a particular appearance has precise scale lines and a flat working surface, convenient for you to locate and measure the engraving material size. And the high quality emergency stop and 6 limit switches for all-around protection making it more safe to use
- Wide Compatibility & Easy to Assembly : The CNC carving machine is compatible with GRBL software and supports Windows XP/7/8/10, Linux and Mac OS (a bit more complicated to operate compared to Windows). This unit is pre-assembled, It was easy to assemble out of the box with concise instructions
- Package Included : Comes with everything you need. It's: all parts to assemble the 3020 PLUS CNC machine, offline controller, Z-probe, CNC router bits, clamp, and more. This is an extremely well-built, capable machine, works fantastically well. Also we are CNC experts, If any questions, please contact us as soon as possible!
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: MYSWEETY
Dimensions: 11.81 x 7.87 x 0.01 inches
See On Amazon #18
CNCTOPBAOS 2 in 1 4540 CNC Router Engraving Machine,20W Module&500W Spindle Milling Carving Cutting Aluminum,Stainless Steel,Wood,Acrylic,Metal w/Touchscreen Offline Controller/Limit Switches/E-Stop
Asin: B0CMTF29TS
♞【20W Engraving Module】Compressed Spot 20W ; Engraving Accuracy: 0.01Mm ; Optical Power : 5000Mw ; Cutting Depth: 0.11"-0.19"(3-5Mm) ; Wavelength: 450±5Nm; Input: Dc 12V 3A; Adopting Optical Compression Technology,With Small Light Spot,Good Optical Quality,High-Speed Engraving, Good Heat Dissipation,And Long Service Life..
♞【Wide Application】Can Engrave On Stainless Steel,Wood, Mdf, Carbon Fiber, Pcb, Pvc, Leather, Paper, Acrylic, Resin, Ceramic Products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum And So On.This Machine Can Both Carve And Cut.It Can Cut 8-12Mm (0.31"-0.47") Mdf And 5Mm (0.19") Thick Aluminum..
♞【Supported Software&Computer Systems】4540 Cnc Engraving Machine Is Compatible With Grbl Software/Candle And Supports Windows Xp/7/8/10 And Mac Os.The Grbl Control Software In Our Package Supports Nc, Ncc, Ngc, Tag And Other G Files.【Touchscreen Offline Controller】Comes With A 2.8" Touchscreen Lcd Display That's Easy To Read And Use,You Can Control Your Cnc Without Pc.Just Put The Project You Need Inside That Sd Card,And You Can Operate The Engraving Machine Via This Offline Controller..
♞【Larger Engraving Range】Large Mdf Working Table;Working Area:430*390*90Mm (16.93*15.39*3.54 Inches);Overall Size:650*532*320Mm (25.59*20.94*12.60 Inches);The Worktable Has An Accurate Scale Line,Which Is Convenient To Locate And Measure The Size Of The Engraving Material..
Features
- High Speed 500W Spindle The 4540 cnc engraving machine is equipped with 500W 48V 11000rpm spindle (with ER11 collet),which is more powerful and efficient,and can do a variety of drilling and carving operations on various materials such as big wood,can cut stainless steel,aluminum and other metals;Max.Movement Speed:5000mm/min;Speed range:0-11000rpm.
- Larger Engraving range Large MDF working table;Working area:430*390*90mm (16.93*15.39*3.54 inches);Overall Size:650*532*320mm (25.59*20.94*12.60 inches);The worktable has an accurate scale line,which is convenient to locate and measure the size of the engraving material.
- 20W Engraving Module Compressed spot 20W ; Engraving accuracy: 0.01mm ; Optical power : 5000mW ; Cutting depth: 0.11-0.19(3-5mm) ; Wavelength: 450 5nm; Input: DC 12V 3A; Adopting optical compression technology,with small light spot,good optical quality,high-speed engraving, good heat dissipation,and long service life.
- Supported Software&Computer Systems 4540 CNC engraving machine is compatible with GRBL software/Candle and supports Windows XP/7/8/10 and Mac OS.The GRBL Control Software in our package supports Nc, Ncc, Ngc, Tag and other G files. Touchscreen offline controller Comes with a 2.8 Touchscreen LCD Display that's easy to read and use,you can control your CNC without PC.Just put the project you need inside that SD card,and you can operate the engraving machine via this offline controller.
- Wide Application Can engrave on Stainless steel,Wood, MDF, Carbon fiber, PCB, PVC, Leather, Paper, Acrylic, Resin, Ceramic products, Food, Bamboo, Plastic, Nylon, Plywood, Brass, Plexiglass, Aluminum and so on.This machine can both carve and cut.It can cut 8-12mm (0.31-0.47) MDF and 5mm (0.19) thick aluminum.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
Weight: 34.50 Pounds
See On Amazon #19
RATTMMOTOR JN400S Power Feed X-Axis 650 in-lb Torque, 0-200RPM, 110V Milling Table Power Feed for Bridgeport and Some Knee Type Milling Machine
Asin: B0CT4G9CY2 | Model: JN400S | PartNumber: JN400S | Ean: 0754193614550 | UPC: 754193614550
【Simple Operation, Convenient Processing】Good Efficiency In Speed Adjustment, When The Tool Is Cutting, The Change Of Escorting Speed Is Small, Then The Cutting Surface Precision Is Good; When Escorting At Low Speed, The Machine Will Not Shake..
【Feature-1】Mainly Used For Milling Machine Table In The X-Coordinate Direction When The Work Movement, To Achieve Forward And Reverse Rotation And Infinitely Artificial Speed Regulation, Instead Of The Traditional Gear Box Speed Change Mechanism..
【Feature-2】Enhanced Torque To Boost Low-Speed Torque For Low-Speed Heavy-Duty Cutting Capability. 0.2-Second Extreme Brake Design Allows For Quick Forward And Reverse Operation To Save Machining Time..
【Safe And Stable】The Knife Walker Adopts 110V Safety Voltage, Safe And Stable Operation, The Gear Ratio Of The Transmission Plastic Gear And The Motor Core Shaft Is Infinitesimal, The Two Gears Will Not Return To The Origin, The Plastic Gear Has A Long Service Life, And The More You Use The Gear, The Smaller The Sound..
【Stable Performance, Precision And Durable Bearings】When Fast Escorting, If The Tool Collides With The Workpiece, Or Turn Left Or Right Instantly, It Is Equipped With A Special Safety Device To Transmit Plastic Gears And Electronic Parts Without Damage. Small Use Sound, No Noise, High Speed, Effectively Improve The Working Efficiency..
Features
- Parameter Model: JN400S handle model; Power: 90W; Voltage: 110V; Weight: 6KG; Current: 2.8AMP; Speed range: 2-200RMP; Torque: 650IN-LB.
- Stable performance, precision and durable bearings When fast escorting, if the tool collides with the workpiece, or turn left or right instantly, it is equipped with a special safety device to transmit plastic gears and electronic parts without damage. Small use sound, no noise, high speed, effectively improve the working efficiency.
- Simple operation, convenient processing Good efficiency in speed adjustment, when the tool is cutting, the change of escorting speed is small, then the cutting surface precision is good; when escorting at low speed, the machine will not shake.
- Safe and Stable The knife walker adopts 110V safety voltage, safe and stable operation, the gear ratio of the transmission plastic gear and the motor core shaft is infinitesimal, the two gears will not return to the origin, the plastic gear has a long service life, and the more you use the gear, the smaller the sound.
- Feature-1 Mainly used for milling machine table in the X-coordinate direction when the work movement, to achieve forward and reverse rotation and infinitely artificial speed regulation, instead of the traditional gear box speed change mechanism.
- Feature-2 Enhanced torque to boost low-speed torque for low-speed heavy-duty cutting capability. 0.2-second extreme brake design allows for quick forward and reverse operation to save machining time.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RATTMMOTOR
Dimensions: 12.80 x 3.50 x 7.00 inches
See On Amazon #20
Urparcel Power Feed X-Axis for Mills,450 in-lbs Torque,0-200RPM Benchtop Mill Power Feed 110V,for Bridgeport and Some Knee Mills with 5/8" Diameter Shafts On The End
Asin: B0CP7WFS38 | Model: zss-PHO_0YKGNVTN-po | PartNumber: zss-PHO_0YKGNVTN-po | Ean: 6955608505669
【Dual Control Mode】You Can Set This Power Feed To Automatically Work At A Constant Speed, Freeing Your Hands And Improving Efficiency, Or You Can Manually Adjust The Speed Control Knob To Get More Precise Milling Work, The Dual Control Mode Can Provide Excellent Throughout The Range Speed Control To Meet Your Different Needs..
【Wide Application】This Milling Machine Power Feed Is Suitable For Some Vertical Knee Milling Machines With The Same Installation Mode And 5/8" End Diameter Shaft, Such As Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb But Not Suitable For Those With There Are Milling Machines With Different Mounting Patterns Or Different Size Wires And Some Other Odd Sized Machines, So Please Double Check Before Buying That Your Machine Is The Typical Bridgeport Type Mentioned Above..
【High Efficiency Design】Equipped With Gleason Spiral Bevel Gear, The Transmission Ratio Is Stable During Use, The Transmission Noise Is Small, The Efficiency Is High, And The Load-Bearing Capacity Is Strong. Special Safety Devices Protect The Transmission Plastic Gears And Electronic Components From Damage..
【Portable And Easy To Install】This Milling Machine Power Supply Is Compact And Portable, Weighing Only 3.75 Kg/8.27 Lbs And Small In Size. Install This Power Supply By Yourself According To The Instructions, Even If You Are A Novice, You Can Operate It Skillfully.
Features
- Basic parameters X-axis power feed is made of aluminum; power parameters: 90 watts, 110V input voltage, 50/60Hz, single phase; rotation speed: 0-200 RPM. Maximum torque: 450in-lb; Maximum feed speed: 650mm/min; Maximum return speed: 850mm/min. This power feed is suitable for some milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.
- Portable and Easy to Install This milling machine power supply is compact and portable, weighing only 3.75 kg/8.27 lbs and small in size. Install this power supply by yourself according to the instructions, even if you are a novice, you can operate it skillfully
- Dual Control Mode You can set this power feed to automatically work at a constant speed, freeing your hands and improving efficiency, or you can manually adjust the speed control knob to get more precise milling work, the dual control mode can provide excellent throughout the range Speed control to meet your different needs.
- High Efficiency Design Equipped with Gleason spiral bevel gear, the transmission ratio is stable during use, the transmission noise is small, the efficiency is high, and the load-bearing capacity is strong. Special safety devices protect the transmission plastic gears and electronic components from damage.
- Wide Application This milling machine power feed is suitable for some vertical knee milling machines with the same installation mode and 5/8 end diameter shaft, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb but not suitable for those with There are milling machines with different mounting patterns or different size wires and some other odd sized machines, so please double check before buying that your machine is the typical Bridgeport type mentioned above.
- See more on Amazon...
Brand: Urparcel | Manufacturer: Urparcel
Weight: 11.00 pounds
See On Amazon
Looking For Something Else?
Search