Geekstory ESP32 LoRa Development Board V3 SX1262, ESP32 LoRa V3 Development Board with OLED Display Type-C+868MHZ LoRa Antenna for Arduino LoraWan IOT Internet,not Compatible with LoRa V2(2-Pack)
Asin: B0CYSHRTPX
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.-Type-C Usb Interface With A Complete Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding, And Other Protection Measures. Onboard Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System. Integrated Cp2102 Usb To Serial Port Chip..
-If You Have Any Question, Please Confirm It With Geekstory As Follow: Click "Geekstory"(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-This 915Mhz Lora Board Comes Unassembled, Soldering Is Required For You, Not Equipped With Lithium Battery. You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, 5V Type C Power Is Recommended..
-Microprocessor: Esp32-S3fn8dual-Core Processor, Frequency Up To 240 Mhz. Sx1262 Lora Node Chip..
Features
- -You will receive, 2pcs 863-928MHz esp32 lora V3 + 2pcs 868mhz lora antenna + 2pcs 2pin 1.25mm cable.
- -Microprocessor: ESP32-S3FN8dual-core processor, frequency up to 240 MHz. SX1262 LoRa node chip.
- -Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures. Onboard SH1.25-2 battery interface, integrated lithium battery management system. Integrated CP2102 USB to serial port chip.
- -This 915MHz LoRa board comes unassembled, soldering is required for you, not equipped with lithium battery. You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, 5V type C power is recommended.
- -If you have any question, please confirm it with Geekstory as follow: click Geekstory(you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon Similar To Geekstory ESP32 LoRa Development Board
#1
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA Compatible with Arduino IDE (3PCS)
Asin: B08D5ZD528 | Model: 15363 | PartNumber: 15363
Supportthree Modes: Ap, Sta, And Ap+Sta.
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Ultra-Low Power Consumption, Compatible With Arduino Ide.
Support Lwip Protocol, Freertos.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- Ultra-Low power consumption, Compatible with Arduino IDE
- ESP32 is a safe, reliable, and scalable to a variety of applications
- See more on Amazon...
Brand: AITRIP | Manufacturer: AiTrip
Dimensions: 0.59 x 2.05 x 1.18 inches
See On Amazon #2
HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
Asin: B0718T232Z | Model: 3-01-1287 | PartNumber: 3-01-1287
Support Lwip Protocol, Freertos.
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Supportthree Modes: Ap, Sta, And Ap+Sta.
Ultra-Low Power Consumption, Works Perfectly With The Arduino Ide.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Ultra-Low power consumption, works perfectly with the Arduino IDE
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- ESP32 is a safe, reliable, and scalable to a variety of applications
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
DIYmall 2 Sets 915MHZ ESP32 Lora V3 WiFi+BLE Development Board 0.96inch OLED Display ESP32-S3 Dual-core SX1262 Type-C Lora Kit for Arduino NodeMCU IoT
Asin: B08629526P | Model: FZ2886-AX2K | PartNumber: FZ2886-AX2K
The Mcu Is Different, So The Definitions Of V2 And V3 Gpio Pins Are Different.
What You Will Get: 2 X Esp32 Lora V3 Development Board + 2 X 915Mhz Antenna + 2 X Jst 1.25Mm-2P Connector Cable + 2.54 Pin (No Welding) + 2 X Protective Case For Lora Board.
When You Use Esp32 Oled Lora, You Need To Use 2Pcs Together. One Is Used For Receiving And Another For Sending.
It Is The Best Option For Smart Cities, Farms, Homes, Industrial Control, House Security, Wireless Meter Reading, And Iot Developers.
Upgraded V3 Version Has Better Impedance Matching Of Rf Circuits.
Mcu: Esp32-S3fn8 (V2 Is Esp32-D0wdq6), Lora Chip: Sx1262(V2 Is Sx1276/8), Usb Socket: Type-C(V2 Is Micro-Usb).
Features
- WiFi LoRa 32 is a classic IoT dev-board. The newly launched V3 version retains Wi-Fi, BLE, LoRa, OLED display, and other functions
- MCU: ESP32-S3FN8 (V2 is ESP32-D0WDQ6), LoRa Chip: SX1262(V2 is SX1276/8), USB Socket: Type-C(V2 is Micro-USB)
- The MCU is different, so the definitions of V2 and V3 GPIO pins are different
- Upgraded V3 version has better impedance matching of RF circuits
- When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending
- It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers
- What you will get: 2 X ESP32 Lora V3 development board + 2 X 915MHz Antenna + 2 X JST 1.25mm-2P Connector cable + 2.54 pin (no welding) + 2 X Protective Case for lora board
- See more on Amazon...
Brand: DIYmall | Manufacturer: Heltec Automation Technology Co., Ltd
Dimensions: 0.38 x 1.97 x 1.00 inches
See On Amazon #4
HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Large)
Asin: B081CSJV2V
Data Download Access To The Website: Http://Www;Nodemcu;Com.
Arduino Compatible, Works Great With The Latest Arduino Ide/Mongoose Iot/Micropython.
Features
- Built-in Micro-USB, with flash and reset switches, easy to program
- Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython
- Data download access to the website: http://www;nodemcu;com
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
3 Pieces Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Filters Compatible with Arduino IDE(32)
Asin: B09GK74F7N
32 Development Board Is Safe, Reliable And Scalable To Various Applications, Bringing You A Lot Of Convenience.
Low Power Consumption: The Development Board Uses 2.4Ghz Dual-Mode Wi-Fi, Chip 32, And 40Nm Low Power Consumption Technology.
Small Size: 32 Dual-Mode Module Is Compact And Easy To Embed Into Your Device, Convenient To Use.
Multiple Functions: 32 Development Board Integrates Antenna Switches, Rf Balun, Power Amplifiers, Low Noise Amplifiers, Filters And Power Management Modules; And The Entire Solution Occupies The Smallest Printed Circuit Board Area.
Features
- Package contains: you will get 3 pieces of 32 2.4GHz dual-mode development boards, enough for your daily use and replacement
- Multiple functions: 32 development board integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules; And the entire solution occupies the smallest printed circuit board area
- 32 Development board is safe, reliable and scalable to various applications, bringing you a lot of convenience
- Small size: 32 dual-mode module is compact and easy to embed into your device, convenient to use
- Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip 32, and 40nm low power consumption technology
- See more on Amazon...
Brand: Flutesan | Manufacturer: Flutesan
Dimensions: 0.51 x 1.96 x 1.04 inches
See On Amazon #6
Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Asin: B0CD2512JV | Model: FNK0091 | PartNumber: FNK0091
Independent Led -> The Status Led Is Driven By The Chip Instead Of The Gpio So The Gpio Will Not Be Affected..
Terminal Block And Header -> Connect To All Gpio Headers Of Raspberry Pi Pico, 2.54Mm / 0.1In Pitch..
Power Circuit -> Provide Multiple 5V And 3.3V Power Outputs. (5V Output Up To 3A With External Power Supply.).
Gpio Status Led -> Led On If Gpio Outputs/Inputs High Level, Led Off If Gpio Outputs/Inputs Low Level..
Features
- Compatible models -> Freenove ESP32 / ESP32-S3 series. (Note: Boards from other brands are not compatible due to different pinout.)
- GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level.
- Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
- Power circuit -> Provide multiple 5V and 3.3V power outputs. (5V output up to 3A with external power supply.)
- Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch.
- See more on Amazon...
Brand: FREENOVE | Manufacturer: Freenove
Warranty: 1 year
See On Amazon #7
DIYmalls 915 ESP32 LoRa OLED Board V3 Type-C SX1262 + 915MHz LoRa Antenna U.FL IPEX to SMA for Arduino IOT LoraWan Gateway, not Compatible with LoRa 32 V2
Asin: B086ZFCV7F | Ean: 0747356634250 | UPC: 747356634250
You Will Receive, 1Pcs 915Mhz Esp32 Lora V3, 1Pcs 915Mhz Lora Antenna,And 1Pcs 2Pin 1.25Mm Connector..
Lora 32 V2 Use Esp32-D0wdq6 Mcu, But The V3 Is Esp32-S3fn8, So Pinout Is Different. The Apis Used With The Libraries Are Different, So Programs Written For V2 Do Not Compile V3..
Support Type-A To Type-C Cable Only, Not Type-C To Type-C Cable..
Lora V3 Board Are An Improvement Over The V2 Version, But They Are Not A Replacement..
When You Use Lora Esp32 915Mhz, You Need To Use 2Pcs Together,One Receiving And Another Sending..
Features
- This LoRa board comes unassembled, soldering is required, not equipped with lithium battery.
- When you use lora esp32 915MHz, you need to use 2pcs together,one receiving and another sending.
- You will receive, 1pcs 915MHz esp32 lora V3, 1pcs 915mhz lora antenna,and 1pcs 2pin 1.25mm connector.
- LoRa V3 board are an improvement over the V2 version, but they are not a replacement.
- LoRa 32 V2 use ESP32-D0WDQ6 MCU, but the V3 is ESP32-S3FN8, so pinout is different. The APIs used with the libraries are different, so programs written for V2 do not compile V3.
- Support type-A to type-C cable only, not type-C to type-C cable.
- See more on Amazon...
Brand: DIYmalls | Manufacturer: DIYmalls
Weight: 0.05 pounds
See On Amazon #8
KeeYees ESP32S ESP32 Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip for Arduino (38PIN Narrow Version, 2PCS)
Asin: B07QCP2451 | Ean: 0713871269840 | UPC: 713871269840
Support Lua Program, Easy To Develop. Support Of Three Modes: Ap, Sta And Ap + Sta..
Technical Support: Our Pdf Tutorial Is Available On This Page. Please Pull Down This Page To Find The Tutorial: User Guide (Pdf).
This Board Is Used With 2.4 Ghz Dual-Mode Wi-Fi And Bluetooth Chips Esp-Wroom-32, As Well As The 40Nm Low-Power Technology..
The Module Has 38 Pins And Has More Features Than A 30-Pin Module. Narrower Width, Compatible With Breadboard.
Features
- This module is safe, reliable, and scalable to a variety of applications.
- The module has 38 pins and has more features than a 30-pin module. Narrower width, compatible with breadboard
- Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA.
- This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.
- Technical Support: Our PDF tutorial is available on this page. Please pull down this page to find the tutorial: User Guide (PDF)
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
Dimensions: 0.47 x 1.90 x 1.00 inches
See On Amazon #9
HiLetgo 1PC ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Small)
Asin: B010O1G1ES | Model: 3-01-0268-1 | PartNumber: 3-01-0268-1 | Ean: 0715120173885, 0710824986076, 1904811721323, 0710824985499, 0712866303101 | UPC: 710824985499, 712866303101, 715120173885, 710824986076
Data Download Access To The Website: Http://Www;Nodemcu;Com.
Arduino Compatible, Works Great With The Latest Arduino Ide/Mongoose Iot/Micropython.
Features
- Built-in Micro-USB, with flash and reset switches, easy to program
- Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython
- Data download access to the website: http://www;nodemcu;com
- See more on Amazon...
Brand: REES52 | Manufacturer: REES52
Dimensions: 1.57 x 1.57 x 1.57 inches | Weight: 0.02 Pounds
See On Amazon #10
LAFVIN Basic Starter Kit for ESP32 ESP-32S WiFi I OT Development Board with Tutorial Compatible with Arduino IDE
Asin: B0BVZBTP8V | Ean: 0732214747807 | UPC: 732214747807
You Can Use Esp32 Modules To Control Other Modules, Such As Led,Dht11,Oled Module, Etc.
Please Download Our Tutorial And Learn After You Receive The Goods..
The Tutorial Include Codes And Lessons.It Will Teach Every Users How To Assembly Basic Starter Kit For Esp32..
The Basic Starter Kit Is Easy To Use And You Can Learn To Program At An Introductory Level..
Features
- Perfect choice for beginners to learn, electronics and program.
- The Basic Starter Kit is easy to use and you can learn to program at an introductory level.
- You can use ESP32 modules to control other modules, such as LED,DHT11,OLED module, etc
- The tutorial include codes and lessons.It will teach every users how to assembly Basic Starter Kit for ESP32.
- Please download our tutorial and learn after you receive the goods.
- See more on Amazon...
Brand: LAFVIN | Manufacturer: LAFVIN
Dimensions: 1.42 x 5.51 x 3.35 inches
See On Amazon
Looking For Something Else?
Search