SDR Radio Receiver, 100KHz to 1766MHz Oscillator RTL SDR Receiver 0.5 PPM TCXO for Antenna
Asin: B0D15VM9M1 | Model: Eujgoov82hgypf195 | PartNumber: Eujgoov82hgypf195
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Multiple Receiver Modes: This Sdr Receiver Supports Am, Nfm, Fm, Dsb, Usb, Lsb And Cw Modes To Meet Your Various Radio Receiving Needs..
Versatile Compatibility: With 50 Ohm Input Impedance, The Radio Receiver Supports Separate Antenna Inputs For Short Waving And Very High Frequency Bands..
High Frequency Sampling: Supports High Frequency Direct Sampling Through Q Branch, Equipped With An 8 Bit Adc And Dynamic Range Of Approximately 50 Db..
Tcxo Oscillator: The Sdr Radio Receiver Features 0.5Ppm Temperature Compensated Oscillator (Tcxo), Ensuring A Stable And Consistent Performance Even Under Varying Thermal Conditions..
Features
- Wide Range: Powered by RTL2832U and R820T2 chipset, this RTL SDR receiver operates between 100KHz to 1766MHz frequencies, covering all high frequency amateur bands.
- TCXO Oscillator: The SDR radio receiver features 0.5PPM temperature compensated oscillator (TCXO), ensuring a stable and consistent performance even under varying thermal conditions.
- Multiple Receiver Modes: This SDR receiver supports AM, NFM, FM, DSB, USB, LSB and CW modes to meet your various radio receiving needs.
- High Frequency Sampling: Supports high frequency direct sampling through Q branch, equipped with an 8 bit ADC and dynamic range of approximately 50 dB.
- Versatile Compatibility: With 50 ohm input impedance, the radio receiver supports separate antenna inputs for short waving and very high frequency bands.
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
See On Amazon Similar To SDR Radio Receiver 100KHz to
#1
RTL-SDR Blog V4 R828D RTL2832U 1PPM TCXO HF Bias Tee SMA Software Defined Radio with Dipole Antenna Kit
Asin: B0CD7558GT | Model: rtlsdr_v4_with_antenna | PartNumber: rtlsdr_v4_with_antenna | Ean: 0783495030867 | UPC: 783495030867
Can Tune From 500 Khz To 1.7 Ghz And Has Up To 3.2 Mhz Of Instantaneous Bandwidth (2.4 Mhz Stable). Please Note Rtl-Sdr Dongles Are Rx Only..
Note: The Rtl-Sdr Blog V4 Requires A Driver Update. Please Follow The Installation Manual Carefully! Reviewers That Mention Receiving No Signals Have Not Followed The Instructions!.
Comes With Our Portable Vhf/Uhf Dipole Antenna Kit. Great For Beginners As It Allows For Terrestrial And Satellite Reception. Easy To Mount Outdoors And Designed For Portable And Temporary Outside Usage. Please Do Not Use Outside During Poor Weather Conditions. Not Suitable For Hf Reception..
Several Improvements Over Other Brands Including Use Of The R828d Tuner, Built In Hf Upconverter, Improved Component Tolerances, A 1 Ppm Temperature Compensated Oscillator (Tcxo), Sma F Connector, Aluminum Shielded Case With Thermal Pad For Passive Cooling, Improved Filtering, Activatable Bias Tee Circuit And A Much Improved Antenna Set..
Features
- Includes 1x RTL-SDR Blog V4 R828D RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit
- Several improvements over other brands including use of the R828D tuner, built in HF upconverter, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminum shielded case with thermal pad for passive cooling, improved filtering, activatable bias tee circuit and a much improved antenna set.
- Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). Please note RTL-SDR dongles are RX only.
- Comes with our portable VHF/UHF dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions. Not suitable for HF reception.
- NOTE: The RTL-SDR Blog V4 requires a driver update. Please follow the installation manual carefully! Reviewers that mention receiving no signals have not followed the instructions!
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
Dimensions: 9.45 x 7.48 x 1.97 Inches
Warranty: 2 years warranty on manufacturing defects
See On Amazon #2
RTL-SDR Blog V4 R828D RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only)
Asin: B0CD745394 | Ean: 0783495030850 | UPC: 783495030850
Can Tune From 500 Khz To 1.7 Ghz And Has Up To 3.2 Mhz Of Instantaneous Bandwidth (2.4 Mhz Stable). Please Note Rtl-Sdr Dongles Are Rx Only..
Note: The Rtl-Sdr Blog V4 Requires A Driver Update. Please Follow The Installation Manual Carefully! Reviewers That Mention Receiving No Signals Have Not Followed The Instructions!.
Several Improvements Over Other Brands Including Use Of The R828d Tuner, Built In Hf Upconverter Circuit, Improved Filtering, Improved Component Tolerances, A 1 Ppm Temperature Compensated Oscillator (Tcxo), Sma F Connector, Aluminium Shielded Case With Thermal Pad For Passive Cooling, Improved Filtering, And An Activatable Bias Tee Circuit..
Features
- Includes 1x RTL-SDR Blog brand R828D RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle (V4) (Dongle Only)
- Several improvements over other brands including use of the R828D tuner, built in HF upconverter circuit, improved filtering, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminium shielded case with thermal pad for passive cooling, improved filtering, and an activatable bias tee circuit.
- Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). Please note RTL-SDR dongles are RX only.
- NOTE: The RTL-SDR Blog V4 requires a driver update. Please follow the installation manual carefully! Reviewers that mention receiving no signals have not followed the instructions!
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
Dimensions: 0.59 x 2.76 x 5.31 inches
Warranty: 2 years warranty on manufacturing defects
See On Amazon #3
Nooelec RTL-SDR v5 Bundle - NESDR Smart HF/VHF/UHF (100kHz-1.75GHz) Software Defined Radio. Premium RTLSDR w/ 0.5PPM TCXO, SMA Input, Aluminum Enclosure & 3 Antennas. RTL2832U & R820T2-Based Radio
Asin: B01GDN1T4S | Model: 100700 | PartNumber: 100700 | Ean: 0616469145857 | UPC: 616469145857
The Best-Performing Low-Cost Rtl-Sdr Available Anywhere! Compared With Rtl-Sdr V3, Hf Snr Is Improved By Up To 15Db, Vhf & Uhf Snr Is Improved By Up To 6Db, Tuning Accuracy Is Improved By An Average Of 4X, And The Frequency Range Is Expanded All The Way Down To 100Khz.
Proudly Built By Nooelec In The Usa And Canada! Full 2-Year Product Warranty And Product Support Through Our Support Portal At Https//Support.Nooelec.Com.
Full Datasheet Available: Https://Www.Nooelec.Com/Datasheets/100700.
Though The Direct Sampling Implementation Of Nesdr Smart V5 Is Much Better Than Any Other Rtl-Sdr, We Still Recommend Using An Upconverter Like The Ham It Up For A More Fulfilling Hf Experience (Sold Separately, Product Id B076cyk8xz).
Your Purchase Includes A Nesdr Smart V5 Rtl-Sdr, A Magnetic Antenna Base With A 2M (6.5') Rg-58 Feed Cable, And 3 Different Antenna Masts For Uhf And Vhf Operation, Including A Variable-Frequency Telescopic Antenna.
V5 Has A Frequency Capability Of 100Khz To 1.75Ghz And Up To 3.2Mhz Of Instantaneous Bandwidth. Hf Reception Below 25Mhz Is Accomplished With Direct Sampling And Requires A Suitable Antenna. We Recommend Using A Balun One Nine To Make A Diy Long Wire Or Dipole Antenna (Sold Separately, Product Id B08hgsyb7r Or B00r09wht6).
Nesdr Smart Rtl-Sdr V5 Can Be Used For The Reception Of Broadcast Am Radio, Broadcast Fm Radio, Shortwave Radio, Cb Radio, Public Security Radio, Trunked Radio, Air Traffic Control, Acars (Plane-Ground Communications), Ads-B (Plane Tracking), Ais (Ship Tracking), Pocsag (Pagers), Noaa And Goes Weather Satellites (Weather Images), Weather Balloons, Radiosondes, Dab Radio, Dvb-T Video, Inmarsat, Iridium, And So Much More!.
Features
- Turn your computer, phone or tablet into a radio scanner/ham radio receiver that can receive nearly all RF signals! Compatible with Windows, Mac OS, Linux, and Android
- NESDR SMArt RTL-SDR v5 can be used for the reception of broadcast AM radio, broadcast FM radio, shortwave radio, CB radio, public security radio, trunked radio, air traffic control, ACARS (plane-ground communications), ADS-B (plane tracking), AIS (ship tracking), POCSAG (pagers), NOAA and GOES weather satellites (weather images), weather balloons, radiosondes, DAB radio, DVB-T video, Inmarsat, Iridium, and so much more!
- The best-performing low-cost RTL-SDR available anywhere! Compared with RTL-SDR v3, HF SNR is improved by up to 15dB, VHF & UHF SNR is improved by up to 6dB, tuning accuracy is improved by an average of 4x, and the frequency range is expanded all the way down to 100kHz
- v5 has a frequency capability of 100kHz to 1.75GHz and up to 3.2MHz of instantaneous bandwidth. HF reception below 25MHz is accomplished with direct sampling and requires a suitable antenna. We recommend using a Balun One Nine to make a DIY long wire or dipole antenna (sold separately, product ID B08HGSYB7R or B00R09WHT6)
- Though the direct sampling implementation of NESDR SMArt v5 is much better than any other RTL-SDR, we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience (sold separately, product ID B076CYK8XZ)
- Your purchase includes a NESDR SMArt v5 RTL-SDR, a magnetic antenna base with a 2m (6.5') RG-58 feed cable, and 3 different antenna masts for UHF and VHF operation, including a variable-frequency telescopic antenna
- Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty and product support through our support portal at https//support.nooelec.com
- Full datasheet available: https://www.nooelec.com/datasheets/100700
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.79 x 11.42 x 3.94 inches | Weight: 0.33 Pounds
Warranty: 2 year manufacturer warranty
See On Amazon #4
Nooelec RTL-SDR v5 SDR - NESDR Smart HF/VHF/UHF (100kHz-1.75GHz) Software Defined Radio. Premium RTLSDR w/ 0.5PPM TCXO, SMA Input & Aluminum Enclosure. RTL2832U & R820T2 (R860)-Based Radio
Asin: B01HA642SW | Model: NESDR SMArt SDR | PartNumber: NESDR SMArt SDR | Ean: 0616469145857, 0616469145864 | UPC: 616469145857, 616469145864
The Best-Performing Low-Cost Rtl-Sdr Available Anywhere! Compared With Rtl-Sdr V3, Hf Snr Is Improved By Up To 15Db, Vhf & Uhf Snr Is Improved By Up To 6Db, Tuning Accuracy Is Improved By An Average Of 4X, And The Frequency Range Is Expanded All The Way Down To 100Khz.
Proudly Built By Nooelec In The Usa And Canada! Full 2-Year Product Warranty And Product Support Through Our Support Portal At Https//Support.Nooelec.Com.
Full Datasheet Available: Https://Www.Nooelec.Com/Datasheets/100701.
Though The Direct Sampling Implementation Of Nesdr Smart V5 Is Much Better Than Any Other Rtl-Sdr, We Still Recommend Using An Upconverter Like The Ham It Up For A More Fulfilling Hf Experience (Sold Separately, Product Id B076cyk8xz).
Your Purchase Includes A Nesdr Smart V5 Rtl-Sdr. For A Version Which Includes An Antenna Set, See Product Id B01gdn1t4s.
V5 Has A Frequency Capability Of 100Khz To 1.75Ghz And Up To 3.2Mhz Of Instantaneous Bandwidth. Hf Reception Below 25Mhz Is Accomplished With Direct Sampling And Requires A Suitable Antenna. We Recommend Using A Balun One Nine To Make A Diy Long Wire Or Dipole Antenna (Sold Separately, Product Id B08hgsyb7r Or B00r09wht6).
Nesdr Smart Rtl-Sdr V5 Can Be Used For The Reception Of Broadcast Am Radio, Broadcast Fm Radio, Shortwave Radio, Cb Radio, Public Security Radio, Trunked Radio, Air Traffic Control, Acars (Plane-Ground Communications), Ads-B (Plane Tracking), Ais (Ship Tracking), Pocsag (Pagers), Noaa And Goes Weather Satellites (Weather Images), Weather Balloons, Radiosondes, Dab Radio, Dvb-T Video, Inmarsat, Iridium, And So Much More!.
Features
- Turn your computer, phone or tablet into a radio scanner/ham radio receiver that can receive nearly all RF signals! Compatible with Windows, Mac OS, Linux, and Android
- NESDR SMArt RTL-SDR v5 can be used for the reception of broadcast AM radio, broadcast FM radio, shortwave radio, CB radio, public security radio, trunked radio, air traffic control, ACARS (plane-ground communications), ADS-B (plane tracking), AIS (ship tracking), POCSAG (pagers), NOAA and GOES weather satellites (weather images), weather balloons, radiosondes, DAB radio, DVB-T video, Inmarsat, Iridium, and so much more!
- The best-performing low-cost RTL-SDR available anywhere! Compared with RTL-SDR v3, HF SNR is improved by up to 15dB, VHF & UHF SNR is improved by up to 6dB, tuning accuracy is improved by an average of 4x, and the frequency range is expanded all the way down to 100kHz
- v5 has a frequency capability of 100kHz to 1.75GHz and up to 3.2MHz of instantaneous bandwidth. HF reception below 25MHz is accomplished with direct sampling and requires a suitable antenna. We recommend using a Balun One Nine to make a DIY long wire or dipole antenna (sold separately, product ID B08HGSYB7R or B00R09WHT6)
- Though the direct sampling implementation of NESDR SMArt v5 is much better than any other RTL-SDR, we still recommend using an upconverter like the Ham It Up for a more fulfilling HF experience (sold separately, product ID B076CYK8XZ)
- Your purchase includes a NESDR SMArt v5 RTL-SDR. For a version which includes an antenna set, see product ID B01GDN1T4S
- Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty and product support through our support portal at https//support.nooelec.com
- Full datasheet available: https://www.nooelec.com/datasheets/100701
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.39 x 3.54 x 0.39 inches
Warranty: 2 year manufacturer warranty
See On Amazon #5
RTL-SDR Blog Multipurpose Dipole Antenna Kit
Asin: B075445JDF | Ean: 0651989513489 | UPC: 651989513489
Features
- Dipole set includes 1x dipole base with 60cm RG174, 2x 23cm to 1m telescopic antenna, 2x 5cm to 13cm telescopic antenna, 1x 3m RG173 extension cable, 1x flex tripod mount, 1x suction cup mount.
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
Dimensions: 1.97 x 10.63 x 7.28 inches
See On Amazon #6
RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Software Defined Radio with Dipole Antenna Kit
Asin: B0BMKB3L47 | Ean: 0783495030836 | UPC: 783495030836
Can Tune From 500 Khz To 1.7 Ghz And Has Up To 3.2 Mhz Of Instantaneous Bandwidth (2.4 Mhz Stable). (Hf Reception Below 24 Mhz In Direct Sampling Mode With Reduced Performance). Please Note Rtl-Sdr Dongles Are Rx Only..
Comes With Our Portable Vhf/Uhf Dipole Antenna Kit. Great For Beginners As It Allows For Terrestrial And Satellite Reception. Easy To Mount Outdoors And Designed For Portable And Temporary Outside Usage. Please Do Not Use Outside During Poor Weather Conditions. Not Suitable For Hf Reception..
Several Improvements Over Other Brands Including Use Of The R860 Tuner, Improved Component Tolerances, A 1 Ppm Temperature Compensated Oscillator (Tcxo), Sma F Connector, Aluminum Shielded Case With Thermal Pad For Passive Cooling, Activatable Bias Tee Circuit And A Much Improved Antenna Set..
Features
- Includes 1x RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle and 1x Multipurpose Dipole Antenna Kit
- Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminum shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set.
- Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only.
- Comes with our portable VHF/UHF dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions. Not suitable for HF reception.
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
Dimensions: 3.15 x 9.84 x 7.87 Inches
Warranty: 2 years warranty on manufacturing defects
See On Amazon #7
RTL-SDR Blog V3 R860 RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only) (Black)
Asin: B0BMKZCKTF | Ean: 0783495030843 | UPC: 783495030843
Can Tune From 500 Khz To 1.7 Ghz And Has Up To 3.2 Mhz Of Instantaneous Bandwidth (2.4 Mhz Stable). (Hf Reception Below 24 Mhz In Direct Sampling Mode With Reduced Performance). Please Note Rtl-Sdr Dongles Are Rx Only..
Please Follow The Quickstart Guide Linked In The Included The Manual For Installation Of The Drivers And Free Software. Please Feel Free To Contact Us Via Amazon Messaging For Technical Support - We're Happy To Help.
Several Improvements Over Other Brands Including Use Of The R860 Tuner, Improved Component Tolerances, A 1 Ppm Temperature Compensated Oscillator (Tcxo), Sma F Connector, Aluminum Shielded Case With Thermal Pad For Passive Cooling, And An Activatable Bias Tee Circuit..
Features
- Includes 1x RTL-SDR Blog brand R860 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle (V3) (Dongle Only)
- Several improvements over other brands including use of the R860 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminum shielded case with thermal pad for passive cooling, and an activatable bias tee circuit.
- Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only.
- Please follow the quickstart guide linked in the included the manual for installation of the drivers and free software. Please feel free to contact us via Amazon messaging for technical support - we're happy to help
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
Warranty: 2 years warranty on manufacturing defects
See On Amazon #8
RaTLSnake M6 v2 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and Other Software Defined Radios. Magnetic Whip Antenna Set Made with Low-Loss RG58 Cable for Radios with 50 Ohm SMA Connectors
Asin: B073JWDXMG | Model: RaTLSnake M6 | PartNumber: RaTLSnake M6 | Ean: 0616469146038 | UPC: 616469146038
Male Sma Connector On Antenna Cable For Easy Connectivity To All 50Ω Sma-Input Radios Like Our Nesdr Smart Series And Hackrf One.
Antenna Base Is Constructed From Heavy-Gauge Metal For Resilience And Longevity. Includes Full 1 Year Warranty Direct From Nooelec!.
Redesigned For 50Ω To Maximize Compatibility With Commonly Used Radios And To Reduce Swr Mismatches. The Base Has Been Redesigned To Improve Ground Plane Coupling And Shielding Over V1..
Includes Antenna Base And 3 Antenna Masts--Helical, Dvb-T2 And Telescopic--For Wideband Reception. Specially Designed For Wideband Software Defined Radios.
Features
- Heavy-duty, wide-band premium antenna bundle for RTL-SDR and other SMA radios. Long 2m (6') cable made with low-loss RG-58
- Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Specially designed for wideband software defined radios
- Male SMA connector on antenna cable for easy connectivity to all 50 SMA-input radios like our NESDR SMArt series and HackRF One
- Redesigned for 50 to maximize compatibility with commonly used radios and to reduce SWR mismatches. The base has been redesigned to improve ground plane coupling and shielding over v1.
- Antenna base is constructed from heavy-gauge metal for resilience and longevity. Includes full 1 year warranty direct from Nooelec!
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 1.97 x 87.80 x 2.56 inches | Weight: 0.58 Pounds
See On Amazon #9
Nooelec Lana - Ultra Low-Noise Amplifier (LNA) Module for RF & Software Defined Radio (SDR) with Enclosure & Accessories. Wideband 20MHz-4000MHz Frequency Capability with Bias Tee & USB Power Options
Asin: B07XNLJ9X2 | Model: LaNA | PartNumber: LaNA | Ean: 0616469146564 | UPC: 616469146564
Can Be Powered Through Bias Tee (3.3V-5V), Usb, Or Dc Power With The Included Adapter. A Free Male Sma To Male Sma Connector Is Also Included.
Note: Some Sdrs Will Require A Dc Block Between The Lna And Sdr If Utilizing The External Power Options..
Made In North America. 2 Year Warranty! For More Information Review The Product Page Or Datasheet: Https://Www.Nooelec.Com/Datasheets/100812.
Higher Gain, Lower Noise Figure, Lower Power Consumption And Better Linearity Than Modules Based On Spf5189z And Similar Lna Mmics.
Features
- Improve the SNR and performance of your RTL-SDR, SDR or other radio! LaNA is a wideband (20MHz - 4GHz), high-performance, general purpose LNA module with an extremely low noise figure, installed in a quality aluminum enclosure
- Higher gain, lower noise figure, lower power consumption and better linearity than modules based on SPF5189Z and similar LNA MMICs
- Can be powered through bias tee (3.3V-5V), USB, or DC power with the included adapter. A free male SMA to male SMA connector is also included
- Made in North America. 2 year warranty! For more information review the product page or datasheet: https://www.nooelec.com/datasheets/100812
- NOTE: Some SDRs will require a DC block between the LNA and SDR if utilizing the external power options.
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.39 x 3.15 x 1.18 inches | Weight: 0.11 Pounds
See On Amazon #10
Nooelec NESDR Mini USB RTL-SDR & ADS-B Receiver Set, RTL2832U & R820T Tuner, MCX Input. Low-Cost Software Defined Radio Compatible with Many SDR Software Packages. R820T Tuner & ESD-Safe Antenna Input
Asin: B009U7WZCA | Model: NESDR Mini | PartNumber: NESDR Mini | Ean: 0616469145710, 0616469145598 | UPC: 616469145598, 616469145710
These Are Custom Usb Devices Tuned For Sdr And Include Much Better Components Than Generics.
Full 1-Year Warranty & Installation Support Available!.
Rtl2832u Interface Ic & R820t Tuner Ic On Usb Dongle.
Features
- Included: Nooelec USB dongle & antenna
- RTL2832U interface IC & R820T tuner IC on USB dongle
- These are custom USB devices tuned for SDR and include much better components than generics
- Full 1-year warranty & installation support available!
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 1.18 x 4.72 x 2.76 Inches | Weight: 0.15 pounds
See On Amazon #11
2023 4Inch TinySA Ultra Spectrum Analyzer 100kHz-5.3GHz,V0.4.5.1 Portable Tiny Frequency Analyzer with 32GB SD Card & 3000mAh Battery, 2-in-1 RF Signal Generator RBW LNA DANL Phase Noise
Asin: B0BPXXLNPH | Ean: 5057803519340
【Used As Signal Generator】It Is 2 In 1 Device, Can Be Used As Signal Generator. Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Input Calibration. 100K-800Mhz Sine Wave Output; 800Mhz-4.4Ghz Square Wave Output; 4.4Ghz-5.4Ghz Mixing Signal Output..
【3000Mah Rechargeable Battery & Pc Control】 The Tinysa Analyzer Built-In 3000Mah Rechargeable Battery，Can Be Used For Up To 8 Hours. Support Pc Control，You Can Also Transfer Data To Your Computer Through Tinysa-App Connection. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel..
【Include 32Gb Sd Card】 This Ultra Spectrum Analyzer Built-In 32Gb Micro Sd Card, Can Directly Record Data To The Card ,Which Is Convenient For Your Data Sharing And Storage. You Won't Be Bothered By Saving Data Any More, And Can Take Tinysa For Use At Anywhere And Anytime.N 240Mhz-960Mhz..
【Frequency Range】Ultra Tinysa Has 100Khz To 5.3Ghz Ultra-Wide Measuring Frequency Range, Spectrum Analyzer For 0.1-800Mhz. In Ultra Mode, Up To 0.1Mhz-6Ghz. It Has 200Hz-850Khz Rbw, Adjacent Signals Effectively Distinguished When Rbw Reach 200Hz, Meet Ssb Two-Tone Test Requirements, Maximum Width 850Khz, Rbw Implements Fast Scanning..
Features
- New TinySA Ultra Mode The ULTRA Tinysa developed by Hugen can reach an ultra-wide frequency range from 100kHz to 5.3GHz. The 4-inch large screen provides clear data images and sensitive operation touch. It also has a new ESD protection function, installed the latest hardware system V0.4.5.1, professional and stable.
- Frequency Range ULTRA tinysa has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz. In Ultra mode, up to 0.1MHz-6GHz. It has 200Hz-850kHz RBW, adjacent signals effectively distinguished when RBW reach 200Hz, meet SSB two-tone test requirements, maximum width 850kHz, RBW implements fast scanning.
- Used As Signal Generator It is 2 in 1 device, can be used as Signal Generator. Built-in calibration signal generator that is used for automatic self test and low input calibration. 100k-800MHz sine wave output; 800MHz-4.4GHz square wave output; 4.4GHz-5.4GHz mixing signal output.
- Include 32GB SD Card This ULTRA spectrum analyzer built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage. You won't be bothered by saving data any more, and can take tinysa for use at anywhere and anytime.n 240MHz-960MHz.
- 3000mAh Rechargeable Battery & PC Control The tinysa analyzer built-in 3000mAh rechargeable battery can be used for up to 8 hours. Support PC Control you can also transfer data to your computer through tinySA-APP connection. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- See more on Amazon...
Brand: SDRGEEK | Manufacturer: SDRGEEK
See On Amazon #12
Sunbuck Stereo Receivers with Bluetooth 5.0, 2 Channel Sound Stereo Amplifier, Max 400Wx2, with USB/SD/RCA/MIC/FM in, Remote, Home Theater Audio Stereo System Components, Receiver for Speaker, AS-35BU
Asin: B08J43HT1Z | Model: AS-35BU | PartNumber: AS-35BU | Ean: 0192408689212 | UPC: 192408689212
【Flexible 7 Inputs】The Stereo Amplifier Supports Various External Signal Sources. 2 Pairs Rca Audio Inputs, 2 Microphone Inputs, Usb2.0, Sd Card, Bluetooth 5.0, Fm Radio And Aux..
【Small & Compact】The Compact Size Of Our Audio Receiver Ensures That It Takes Up Minimal Space In Your Stereo System, And Fits Easily Into Your Bookshelf Or A/V Cabinets..
【Excellent Bluetooth Compatibility】The Bluetooth Amplifier Is Compatible With All Your Favorite Bluetooth Devices(For Iphone, Android, Smartphone, Ipad, Laptop, Computer, Etc.).
【High Fidelity】The As-35Bu Stereo Receiver Has Upgraded Audio Processing Chips. Low Distortion And Low Noise Allow You To Enjoy Wonderful Music All The Time..
Features
- Sufficient Power A robust and impactful sound is suitable both indoor and outdoor. The power amplifier provides you with Max 400Wx2 power output(RMS 60w 2).
- High Fidelity The AS-35BU stereo receiver has upgraded audio processing chips. Low distortion and low noise allow you to enjoy wonderful music all the time.
- Flexible 7 inputs The stereo amplifier supports various external signal sources. 2 pairs RCA audio inputs, 2 microphone inputs, USB2.0, SD card, Bluetooth 5.0, FM radio and AUX.
- Excellent Bluetooth Compatibility The bluetooth amplifier is compatible with all your favorite bluetooth devices(For iPhone, Android, Smartphone, iPad, laptop, Computer, etc.)
- Small & Compact The compact size of our audio receiver ensures that it takes up minimal space in your stereo system, and fits easily into your bookshelf or A/V cabinets.
- See more on Amazon...
Brand: Sunbuck | Manufacturer: JS Electronics Limited
Dimensions: 2.17 x 6.10 x 5.31 inches | Weight: 2.20 Pounds
Warranty: 3 months
See On Amazon #13
RTL-SDR Blog Wideband Low Noise Amplifier Bias Tee Powered
Asin: B07G14Q6XX | Model: WBLNA | PartNumber: WBLNA | Ean: 0651989513519 | UPC: 651989513519
Oip3 = 39.5 Dbm @ 900 Mhz, P1 Saturation = 22.7 Dbm @ 1960 Mhz.
Bias Tee Powered (Needs 3-5V Bias Tee Power).
Gain = 18.7 Db @ 900 Mhz.
Noise Figure = 0.6Db @ 900 Mhz.
Features
- Frequency range of 50 MHz to 4000 MHz
- Noise figure = 0.6dB @ 900 MHz
- OIP3 = 39.5 dBm @ 900 MHz, P1 Saturation = 22.7 dBm @ 1960 MHz
- Gain = 18.7 dB @ 900 MHz
- Bias Tee Powered (Needs 3-5v bias tee power)
- See more on Amazon...
Brand: RTL-SDR Blog | Manufacturer: RTL-SDR Blog
See On Amazon #14
Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function
Asin: B08FB5XT7B | Model: TinySA | PartNumber: TinySA | Ean: 6933834650971
【Tiny Spectrum Analyzers & Esd Function】Switchable Resolution Bandpass Filters For Both Ranges Between 2.6Khz And 640Khz.Color Display Showing 290 Scan Points Covering Up To The Full Low Or High Frequency Range. Bulit-In Rechargeable Battery Allowing A Minimum Of At Least 2 Hours Portable Use.The Performance Of The 2021 Latest Version 3.1 Will Be More Stable And Sensitive, With A New Esd Protrcted Function Enable The Product To Have A Higher Antistatic Level And A Longer Service Life..
【Package List】1X Tiny Spectrum Analyzer; 2 X 20Cm Rf Cable;1 X Usb Cable;1 X Sma Female To Female Connector;1X Touchscreen Pen;1 X Sma Telescopic Antenna.It's Very Useful As An Antenna Analyzer For Your Ham Station, Easy To Set Without Fancy Calibration.The Firmware Of The Tinysa Can Be Updated By The User. New Versions Of The Firmware Needed Please Contact Seller For Download Link..
【Pc Control】Connected To A Pc Via Usb It Becomes A Pc Controlled Spectrum Analyzer.The Usb Interface Implements The Serial Over Usb (Cdc) Protocol And There Is A Large Set Of Commands That Can Be Invoked Over The Serial Interface. These Command Can Be Used To Perform Measurements Or Update Internal Settings. The Driver For Windows Will Install Automatically After Connecting To A Windows Pc. The Driver For Linux Is Built Into The Kernel..
【Built-In Calibration Signal Generator】When Not Used As Spectrum Analyzer It Can Be Used As Signal Generator, Mf/Hf/Vhf Sinus Output Between 0.1Mhz-350Mhz, Uhf Square Wave Output Between 240Mhz-960Mhz. Built-In Calibration Signal Generator That Is Used For Automatic Self Test And Low Input Calibration..
Features
- Frequency Range Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer.
- Built-in Calibration Signal Generator When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration.
- Tiny Spectrum analyzers & ESD Function Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life.
- PC Control Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
- Package List 1x Tiny Spectrum Analyzer; 2 x 20cm RF Cable;1 x USB Cable;1 x SMA Female to Female Connector;1x Touchscreen Pen;1 x SMA Telescopic Antenna.It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.The firmware of the tinySA can be updated by the user. New versions of the firmware needed please contact seller for download link.
- See more on Amazon...
Brand: Seesii | Manufacturer: Seesii
Weight: 2.20 Pounds
See On Amazon #15
MLA-30+ Loop Antenna,0.5-30MHz Active Receiving Antenna,MLA-30 Plus Loop Antenna for HA SDR Short Medium Wave Radio,with 10m Feeder,Built-in Low Noise Amplifier,for Rooftop,Balcony
Asin: B095K89WND | Ean: 5057803312798
【Loop Antenna Receiving Method】By Rotating The Antenna, The Antenna's Dummy Point Is Aligned With The Interference Signal..
【Widely Used】Ring Active Receiving Antenna Is An Effective Antenna For Short-Wave Listeners (Swl) And Amateur Radios (Ham).
【Easy To Install】The Active Receiving Antenna Is Compact And Can Be Easily Installed On Balconies, Rooftops, And Other Places, Featuring Compact Size..
【High Efficiency】When Receiving Traditional Antennas, You Can Find Weak Signals That Are Submerged By Noise..
Features
- Excellent Upgrade Version Loop Antenna can help reduce noise and improve SNR.Compared with long-line antennas, local radiated noise suppression of up to 30 dB.
- High Efficiency When receiving traditional antennas, you can find weak signals that are submerged by noise.
- Loop Antenna Receiving Method By rotating the antenna, the antenna's dummy point is aligned with the interference signal.
- Easy To Install The active receiving antenna is compact and can be easily installed on balconies, rooftops, and other places, featuring compact size.
- Widely Used Ring active receiving antenna is an effective antenna for short-wave listeners (SWL) and amateur radios (HAM)
- See more on Amazon...
Brand: DmgicPro | Manufacturer: DmgicPro
Dimensions: 1.57 x 7.87 x 7.87 inches
See On Amazon #16
AnyTone AT-6666 10 Meter Radio High Power 15W/45W/60W 40CH Mobile Transceiver SSB(PEP)
Asin: B08JFTP4N2 | Model: AT 6666 | PartNumber: AT 6666 | Ean: 0883258350857, 0880674897546 | UPC: 880674897546, 883258350857
3.Dimensions: 9.65”(L) X 6.22”(W) X 1.89”(H), Weight: 3.30Lbs; Frequency Tuning Step 100Hz, 1Khz, 10Khz, 100Khz, 1Mhz; Frequency Control: Phase-Locked-Loop Synthesizer; Microphone With Push-To-Talk/Up/Dn And Coild Cord; Programmable Rb Function, Nb/Anl Function, Sq, Asq Function;.
5.Kit Includes: At-6666 Radio, Microphone, Mounting Bracket, Power Cable, Screw & Fuse; 30 Days No Reasion Return, 1-Year Warranty, Warehouse (Domestic Return) In Ca State--No Further Return Issue..
4.40 Channels (Programmable) In Each Band, Dw Dual-Watch Function, Ehco Function, Dtmf, Tot, Beep Voice Prompt, Emg Call, Swr Protection, Hi-Cut Function, +10Khz Function, Power Supply Voltage Protection, Key-Lock Function And More!.
2. Six (6) Groups Memory Channel; Seven (7) Color Lcd Display-White/Blue/Green/Yellow/Red/Purple/Cyan For Meet Your Needs.❤❤ Free Download The Programming Software At Anytone Official Website..
Features
- 1.AnyTone AT-6666 10 Meter Radio, Frequency Range: 28.000-29.700MHz, High Output Power: 15W/45W/65W, flexiable menu function and big LCD displays frequency , perfect for truckers.
- 2. Six (6) Groups Memory Channel; Seven (7) Color LCD Display-white/blue/green/yellow/red/purple/cyan for meet your needs. FREE download the programming software at AnyTone Official Website.
- 3.Dimensions: 9.65 (L) x 6.22 (W) x 1.89 (H), Weight: 3.30lbs; Frequency Tuning Step 100Hz, 1KHz, 10KHz, 100KHz, 1MHz; Frequency Control: Phase-Locked-Loop Synthesizer; Microphone with push-to-talk/UP/DN and coild cord; Programmable RB Function, NB/ANL Function, SQ, ASQ Function;
- 4.40 channels (programmable) in each band, DW DUAL-WATCH Function, EHCO Function, DTMF, TOT, BEEP Voice Prompt, EMG CALL, SWR PROTECTION, HI-CUT Function, +10KHZ Function, Power Supply Voltage Protection, Key-Lock Function and more!
- 5.Kit Includes: AT-6666 Radio, Microphone, Mounting bracket, Power Cable, Screw & Fuse; 30 Days NO REASION RETURN, 1-YEAR Warranty, Warehouse (Domestic Return) in CA State--No Further Return Issue.
- See more on Amazon...
Brand: HESENATE | Manufacturer: AnyTone
Weight: 3.30 Pounds
Warranty: 90 Days
See On Amazon #17
NooElec NESDR Smart XTR SDR - Premium RTL-SDR w/Extended Tuning Range, Aluminum Enclosure, 0.5PPM TCXO, SMA Input. RTL2832U & E4000-Based Software Defined Radio
Asin: B06Y1HKLHY | Model: NESDR SMArt XTR SDR | PartNumber: NESDR SMArt XTR SDR | Ean: 0616469145949 | UPC: 616469145949
Designed From The Ground Up To Reduce Usb Port Occlusion. Run Multiple Nesdr Smart Series Devices Side-By-Side With Any Usb-Compliant Device, Including Tightly-Spaced Embedded Devices Like The Raspberry Pi.
Proudly Built By Nooelec In The Usa And Canada! Full 2-Year Product Warranty..
Sdr Frequency Capability Approximately 65Mhz-2300Mhz. Frequency Range Can Be Extended Down To 100Khz Or Lower With The Ham It Up, Also Available On Amazon (B009lqt3g6).
A Wide Variety Of Improvements On Other Designs, Including Ultra-Low Phase Noise 0.5Ppm Tcxo, 2 Rf-Suitable Voltage Regulators, Custom Heatsink, 2 Silicone Pads And Sma Female Connector.
Features
- Premium software defined radio NESDR SMArt XTR in a beautiful silver brushed aluminum enclosure
- A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, 2 RF-suitable voltage regulators, custom heatsink, 2 silicone pads and SMA female connector
- Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt series devices side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi
- SDR frequency capability approximately 65MHz-2300MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon (B009LQT3G6)
- Proudly built by NooElec in the USA and Canada! Full 2-year product warranty.
- See more on Amazon...
Brand: NooElec | Manufacturer: NooElec Inc.
Dimensions: 0.39 x 4.72 x 1.97 inches
See On Amazon #18
NooElec Ham It Up Plus v2 - Extend The Range of Your RTL-SDR, NESDR or Other Radio Down to 300Hz. HF/MF/LF/VLF/ULF Upconverter and Panadapter w/TCXO & Switchable LNA/Passthrough Options
Asin: B076CYK8XZ | Model: 100769 | PartNumber: 100769 | Ean: 0616469146137 | UPC: 616469146137
Like Ham It Up V1, The Ham It Up Can Be Placed In Bypass Mode With An On-Board Physical Switch To Access The Higher Bands Of Your Radio Without Removing The Ham It Up From Your Signal Chain.
For More Information Review The Product Page Or Datasheet: Https://Www.Nooelec.Com/Datasheets/100769.
Designed For Professional And Amateur Radio Operators, Astronomy Enthusiasts, Wireless Communication Enthusiasts, And More.
A Free Male Sma To Male Sma Connector And Male Sma To Female Bnc Connector Are Included In Your Purchase.
Easy Installation And Compatibility With Popular Software Defined Radio (Sdr) Models. Ham It Up Plus V2 Has A Local Oscillator Frequency Of 125Mhz. This Means It Will Shift Frequencies Higher By 125Mhz When In Upconvert Mode, So Will Work With Any Radio Which Can Receive Between 125Mhz-190Mhz, Including Transmitters And Transceivers!.
A Built-In, Hf-Suitable Low Noise Amplifier (Lna) Circuit Is Included. This Lna Can Be Bypassed With A Physical Switch For Installations Where An Lna Is Not Required Or A Remote Lna Placed Close To A Remote Antenna Is Preferred.
Designed To Be Powered Through The Onboard Microusb Port, Whether From A Pc Or A Wall Adapter. For Simplicity, Ham It Up Plus V2 Does Not Require Usb Data Or Configuration, So It Will Not Enumerate As A Usb Device When Plugged Into A Computer.
Backed By A Generous 2-Year Warranty For Peace Of Mind.
Ham It Up Plus V2 Will Provide A Substantial, Noticeable Performance Increase For Low Frequencies (300Hz To 65Mhz In Upconvert Mode) With Nearly Every Low Cost Radio And Rtl-Sdr In Existence, Whether They Implement Direct Sampling Circuits Or Built-In 'Upconverter'-Like Circuitry.
Features
- The high-quality Ham It Up Plus v2 is an addon for your RTL-SDR or other radio that will allow you to extend the frequency capability all the way down to 300Hz. It is built like a tank in the USA and Canada and drastically outperforms every single similar device in its price class--and even devices far costlier!
- Ham It Up Plus v2 will provide a substantial, noticeable performance increase for low frequencies (300Hz to 65MHz in upconvert mode) with nearly every low cost radio and RTL-SDR in existence, whether they implement direct sampling circuits or built-in 'upconverter'-like circuitry
- Like Ham It Up v1, the Ham It Up can be placed in bypass mode with an on-board physical switch to access the higher bands of your radio without removing the Ham It Up from your signal chain
- Designed to be powered through the onboard microUSB port, whether from a PC or a wall adapter. For simplicity, Ham It Up Plus v2 does not require USB data or configuration, so it will not enumerate as a USB device when plugged into a computer
- Easy installation and compatibility with popular software defined radio (SDR) models. Ham It Up Plus v2 has a local oscillator frequency of 125MHz. This means it will shift frequencies higher by 125MHz when in upconvert mode, so will work with any radio which can receive between 125MHz-190MHz, including transmitters and transceivers!
- A built-in, HF-suitable low noise amplifier (LNA) circuit is included. This LNA can be bypassed with a physical switch for installations where an LNA is not required or a remote LNA placed close to a remote antenna is preferred
- Designed for professional and amateur radio operators, astronomy enthusiasts, wireless communication enthusiasts, and more
- A free male SMA to male SMA connector and male SMA to female BNC connector are included in your purchase
- Backed by a generous 2-year warranty for peace of mind
- For more information review the product page or datasheet: https://www.nooelec.com/datasheets/100769
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 0.79 x 5.12 x 2.36 inches | Weight: 0.29 Pounds
See On Amazon #19
Nooelec NESDR Smart HF Bundle: 100kHz-1.7GHz Software Defined Radio Set for HF/UHF/VHF Including RTL-SDR, Assembled Ham It Up Upconverter, Balun, Adapters
Asin: B0747PX3NZ | Model: NooElec NESDR SMArt HF Bundle | PartNumber: NooElec NESDR SMArt HF Bundle | Ean: 0616469146069 | UPC: 616469146069
Included Is A Ham It Up V1.3 Upconverter, Installed In A Custom Black Aluminum Enclosure; An Nesdr Smart Rtl-Sdr, 3 Antennas, An Impedance Matching Balun For Longwire And Dipole Antennas, And Interconnect Adapters.
Amazon-Exclusive Bundle! Only Available For A Limited Time. Note: Enclosure Colors May Vary Contingent On Availability.
Proudly Manufactured By Nooelec In The Usa And Canada, With A Full 2 Year Product Warranty On All Bundle Components And 24/7 Technical Support Availability. Please Contact Our Support Team Any Time If You Have Questions!.
The Nesdr Smart Hf Bundle Utilizes A Well-Designed Upconverter--The Ham It Up--To Receive Hf, Not Direct Sampling Hacks. This Results In A Vastly Different Hf Experience--Much Better Performance, And No Loss Of Gain Controls.
Features
- A full, wide-band RF solution for those interested in getting started with software defined radio and with a keen interest in HF bands
- The NESDR SMArt HF Bundle utilizes a well-designed upconverter--the Ham It Up--to receive HF, NOT direct sampling hacks. This results in a vastly different HF experience--much better performance, and no loss of gain controls
- Included is a Ham It Up v1.3 upconverter, installed in a custom black aluminum enclosure; an NESDR SMArt RTL-SDR, 3 antennas, an impedance matching balun for longwire and dipole antennas, and interconnect adapters
- Proudly manufactured by Nooelec in the USA and Canada, with a full 2 year product warranty on all bundle components and 24/7 technical support availability. Please contact our support team any time if you have questions!
- Amazon-exclusive bundle! Only available for a limited time. NOTE: enclosure colors may vary contingent on availability
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 1.57 x 11.81 x 9.06 inches | Weight: 0.71 Pounds
See On Amazon #20
Nooelec NESDR Mini 2+ 0.5PPM TCXO RTL-SDR & ADS-B USB Receiver Set w/Antenna, Mount & Female SMA Adapter. RTL2832U & R820T2 Tuner. Low-Cost Software Defined Radio for Windows, Mac OS & Linux
Asin: B00VZ1AWQA | Model: NESDR Mini 2+ | PartNumber: NESDR Mini 2+ | Ean: 0616469145802 | UPC: 616469145802
A Male Mcx To Female Sma Adapter And Strong Magentic Antenna Mount Included As Standard..
Full 2-Year Product Warranty!.
R820t2 Tuner Provides Substantial Performance Improvements Over R820t-Based Devices.
Design Changes Include Rf-Suitable 3.3V Power Supply With 1/10Th Of The Noise Of Other Sdrs, Shielded Power Inductor For Improved Emi Rejection, And More!.
Features
- New! Redesigned for lower noise, better sensitivity and lower power consumption.
- Design changes include RF-suitable 3.3v power supply with 1/10th of the noise of other SDRs, shielded power inductor for improved EMI rejection, and more!
- A male MCX to female SMA adapter and strong magentic antenna mount included as standard.
- R820T2 tuner provides substantial performance improvements over R820T-based devices
- Full 2-year product warranty!
- See more on Amazon...
Brand: NooElec | Manufacturer: Nooelec Inc.
Dimensions: 1.18 x 5.51 x 1.97 inches
See On Amazon
Looking For Something Else?
Search