Fulton Woodworking Tools 4 inch x 50 foot Clear PVC Dust Collection Hose with Steel Thumbscrew Hose Clamp 4 Pack
Asin: B0D1VRMYVC | Model: TS-377 | PartNumber: TS-377 | Ean: 0817918024451 | UPC: 817918024451
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Hose Is Also Clear So You Can See Directly Inside To Spot Any Kind Of Obstruction..
No More Knuckle Busting Flat Head Screw Drivers Or Tiny Socket Wrenches. Simply To Turn The Key Clockwise To Tighten, Counter Clockwise To Loosen..
Set Your Tools Aside When Installing Your Ductwork Or Hose With These Handy, Easy To Tighten Hose/Duct Clamps.
Tight Bending Radius Allows You To Maneuver The Hose Anywhere In Your Shop. This Hose Will Not Collapse Under Pressure From Your Dust Collector.
Features
- Durable, flexible and sturdy PVC dust collection hose. This PVC hose is wrapped around a steel wire that can easily be grounded at each end
- Tight bending radius allows you to maneuver the hose anywhere in your shop. This hose will not collapse under pressure from your dust collector
- The hose is also clear so you can see directly inside to spot any kind of obstruction.
- Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps
- No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Fulton
Dimensions: 0.10 x 600.00 x 4.00 inches
See On Amazon Similar To Fulton Woodworking Tools 4 inch
#1
Fulton 4 inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 5 pack (4" Hose Clamp 5 Pack)
Asin: B07PDS9HG3 | Model: Varitaion Hose Clamps | PartNumber: Varitaion Hose Clamps | Ean: 0817918022099 | UPC: 817918022099
Often Used In These Applications – These Unique Clamps Are Typically Used In Securing Duct Work, Dryer Vents, Dust Collection Hoses, Piping, Large Cable, Pvc Tubing And More. Ideal For Use In Automotive, Industrial, Mechanical, Agriculture, Boat/Marine, Shield, Recreational Vehicles, Household And More. Works For Both Indoor Or Outdoor Use..
Flexible Adjustable Size Range- Each Hose Clamp Is Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 4-7/16” In Full Diameter Down To Appx. 3-7/16” At Its Most Compact Diameter For The 4" Hose Clamps, While The 5" To 6" Hose Clamps Range From 4-1/2" To 6-1/2" In Diameter..
304 Stainless Steel Hose Clamp- The Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
Large Easy To Turn Key - The Easy To Turn And Easy To See Blue Key Is Made From A Strong And Durable Polymer. The Key Is Designed To Make The Securing And Un-Securing Of Hose Much Easier On The Knuckles. No More Knuckle Busting Flat Head Screw Drivers Or Tiny Socket Wrenches. Simply To Turn The Key Clockwise To Tighten, Counter Clockwise To Loosen..
Features
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
- OFTEN USED IN THESE APPLICATIONS These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
- 304 STAINLESS STEEL HOSE CLAMP- The hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- FLEXIBLE ADJUSTABLE SIZE RANGE- Each hose clamp is flexible and workable with a rather wide adjustable size range from appx. 4-7/16 in full diameter down to appx. 3-7/16 at its most compact diameter for the 4 hose clamps, while the 5 to 6 hose clamps range from 4-1/2 to 6-1/2 in diameter.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #2
Fulton Woodworking Tools 4" x 20' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B0013ENKIQ | Model: 376 | PartNumber: 376 | Ean: 0810948014058 | UPC: 810948014058
This Heavy Duty Hose Will Not Collapse Under Pressure From Your Dust Collector..
Hose Is Clear So You Can See Directly Inside To Spot Any Kind Of Obstruction..
Tight Bending Radius Allows You To Maneuver The Hose Anywhere In Your Shop..
Features
- The PVC hose is wrapped around a steel wire that can easily be grounded.
- Tight bending radius allows you to maneuver the hose anywhere in your shop.
- This heavy duty hose will not collapse under pressure from your dust collector.
- Hose is clear so you can see directly inside to spot any kind of obstruction.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 5.00 x 18.00 x 18.00 inches
See On Amazon #3
Fulton Woodworking Tools 4" x 50' Ultra Flex Clear Vue Heavy Duty PVC Dust Collection Hose
Asin: B0013EI04A | Model: 377 | PartNumber: 377 | Ean: 0810948014065, 0798167706759 | UPC: 810948014065, 798167706759
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 10.00 x 24.00 x 20.00 inches
See On Amazon #4
4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B01M3Y1WTT | Model: 6168 | PartNumber: 6168 | Ean: 0817918020460 | UPC: 817918020460
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Dimensions: 4.00 x 120.00 x 4.00 inches
See On Amazon #5
Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery
Asin: B08HR6MDWT | Model: 441 | PartNumber: 441 | Ean: 0817918022839 | UPC: 817918022839
This Cone Shaped Reducer Can Be Also Be Used On Machinery With A Little Help From Some Other Accessories. Typically The Reducer Works With Hose Since It Is Basically The Same Size As Your 4 Inch And 2 1/2 Inch Machinery Or Shop Wet/Dry Vac Ports. With A 4 Inch Diameter Rubber Coupler (Sold Separately) Or A Short Section Of 4 Inch Hose You Can Connect The Reducer Directly To A 4 Inch Port On Machines Like Band Saws, Table Saws, Large Planers And More..
Made From High Quality Abs Plastic For Extended Periods Of Use, This Fitting Will Withstand The Constant Friction And Debris Flow Of Woodworking Dust Collectors. The Reducer Measures: Nominal 4 Inch End Is 3-61/64” Od And 3-41/64” Id; 2-1/2” Nominal Od End Measures 2-15/32” Od And 2-9/32” Id. All Of The Dimensions May Slightly Vary Due To Slight Variations In The Manufacturing Process..
Most Wet/Dry Vacuum Hoses Will Plug Directly Into The Smaller End Of This Fitting Making It A Super Value For Most Of Us Weekend Warrior Type Woodworkers. There Are Some Vacuum Units That Use Different Size Hoses And Hose Adaptors So Please Be Sure To Measure Your Hose And Machine Ports Before Making A Purchasing Decision..
One Of The Reasons That This Fitting Is Used So Often Within The Woodworking Industry, Is That Many Of Us Don’T Want Or Need A Large Dust Collection System In Our Garage Or Workshop. With This Fitting, You’Ll Be Able To Reduce Your Hose Size Down To The 2 1/2 Inch Size Which The Most Commonly Used Size For Most Big Box Store Wet/Dry Vacuums And Shop Vacuums..
Features
- The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more!
- One of the reasons that this fitting is used so often within the woodworking industry, is that many of us don t want or need a large dust collection system in our garage or workshop. With this fitting, you ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums.
- This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more.
- Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value for most of us weekend warrior type woodworkers. There are some vacuum units that use different size hoses and hose adaptors so please be sure to measure your hose and machine ports before making a purchasing decision.
- Made from high quality ABS plastic for extended periods of use, this fitting will withstand the constant friction and debris flow of woodworking dust collectors. The reducer measures: Nominal 4 inch end is 3-61/64 OD and 3-41/64 ID; 2-1/2 nominal OD end measures 2-15/32 OD and 2-9/32 ID. All of the dimensions may slightly vary due to slight variations in the manufacturing process.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #6
Fulton Woodworking Tools 6 Pack of Fulton 4 inch Blast Gates with Double Sided Port - for Use With Dust Collection Machinery - Vacuums with 4 inch Hose
Asin: B0BG8X6NPN | Model: 12109 | PartNumber: 12109 | Ean: 0817918023386 | UPC: 817918023386
This Blastgate Features Tapered Ports On Both Sides Of The Blastgate. The Tapered Ports Allow Hoses (Sold Separately) To Be Slipped On And Clamped With Hose Clamps (Sold Separately) With Ease. Tapered Ports Will Also Accept Some Tapered Fittings..
The Fulton Blastgate Is Made From A Durable Abs Plastic Material For Everyday Workshop Use. With An Easy To Open And Close Sliding Gate You’Ll Be Able To Quickly Open And Close Hose Lines To Concentrate Airflow To Where You Need, When You Need It And For Maximum Airflow..
The Sliding Gate Has A Built-In Stop So It Will Not Slide Out When Fully Opened. The Gate Acts Like A Shut Off Valve To Keep Air From Flowing In A Given Direction When It Is Closed. When Opened, Air Will Pass Through Allowing Dust To Be Collected As Needed..
Ideally, The Way Blastgates Should Work, Is That You Should Have A Blastgate Setup For Every Machine In Your Workshop. When You Close All The Blastgates To All The Other Machines, You Increase The Airflow Or Suction To The Machine Being Used. This Means That You Should See Less Dust On The Machine That Is Being Used Since It Is Getting Maximum Airflow Or Suction. This Also Helps Reduce The Amount Of Wear And Tear On Your Dust Collector..
Features
- When creating or adding to our dust collection system, there are a great many details we need to keep in mind. Typically, we will have one dust collector connected to multiple machines around the shop. While this kind of works, it can work much better if you could turn off the airflow to all the machines except for the one being used at the moment. That s where blastgates step in. Simply open or close the blastgate to allow or block airflow to a specific machine
- Ideally, the way blastgates should work, is that you should have a blastgate setup for every machine in your workshop. When you close all the blastgates to all the other machines, you increase the airflow or suction to the machine being used. This means that you should see less dust on the machine that is being used since it is getting maximum airflow or suction. This also helps reduce the amount of wear and tear on your dust collector.
- This blastgate features tapered ports on both sides of the blastgate. The tapered ports allow hoses (sold separately) to be slipped on and clamped with hose clamps (sold separately) with ease. Tapered ports will also accept some tapered fittings.
- The sliding gate has a built-in stop so it will not slide out when fully opened. The gate acts like a shut off valve to keep air from flowing in a given direction when it is closed. When opened, air will pass through allowing dust to be collected as needed.
- The Fulton blastgate is made from a durable ABS plastic material for everyday workshop use. With an easy to open and close sliding gate you ll be able to quickly open and close hose lines to concentrate airflow to where you need, when you need it and for maximum airflow.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon #7
Fulton 10 inch Long Forstner Bit Extension for Adding Over 8" of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)
Asin: B07ZTJT9GC | Model: 2206 | PartNumber: 2206 | Ean: 0817918022440 | UPC: 817918022440
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 8-1/2 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.00 pounds
See On Amazon #8
Peachtree Woodworking Supply FULTON 4" x 20' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!
Asin: B01MDUGEXE | Model: 6169 | PartNumber: 6169 | Ean: 0817918020477, 0810948003748 | UPC: 810948003748, 817918020477
Excellent Chemical Resistance.
Extremely Flexible.
Good Abrasion And Tear Resistance.
Features
- Ideal for sawdust collection and fume ventilation in woodworkng applications
- Good abrasion and tear resistance
- Excellent chemical resistance
- Extremely flexible
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
Dimensions: 0.50 x 240.00 x 4.00 inches
See On Amazon #9
Fulton Woodworking Tools X-Stream Drill Press Dust Collector with Multi-Axis Adjustability Universal Mount
Asin: B0CZTVFYMK | Ean: 0817918024260 | UPC: 817918024260
From Bench Top Models To Floor Models, This System Is Compatible With Any Size Drill Press. The Included Extra Long Tube Can Be Cut To Size To Perfectly Fit Your Drill Press..
The X-Stream Drill Press Dust Collector Can Be Used With Most Any Material On Your Drill Press. Use This System To Collect Dust And Debris From Wood, Metal, Composites And More. Patent Pending..
With Two Different Nozzles (Tapered And Mini Dust Hood) You’Ll Not Only Be Able To Pin Point Your Dust Collection You’Ll Also Be Able To Sand On Your Drill Press Without Kicking Up So Much Dust. It’S Truly A Game Changer!.
With Multi-Axis Adjustability, You’Ll Have No Problem Collecting The Dust Right From The Source. Simply Adjust The X-Stream Drill Press Dust Collector To Your Exact Position And You’Re Ready To Keep Your Dust And Debris Under Control!.
Features
- This is the most advanced drill press dust collector yet! Keep your drill press work area clear of dust and debris by quickly and easily positioning the X-Stream Drill Press Dust Collector exactly where you need it! The X-Stream Drill Press Dust Collector provides you with an un-obstructed view of your drill point so you never lose site of where you are drilling.
- With Multi-Axis adjustability, you ll have no problem collecting the dust right from the source. Simply adjust the X-Stream Drill Press Dust Collector to your exact position and you re ready to keep your dust and debris under control!
- From bench top models to floor models, this system is compatible with any size drill press. The included extra long tube can be cut to size to perfectly fit your drill press.
- With two different nozzles (tapered and mini dust hood) you ll not only be able to pin point your dust collection you ll also be able to sand on your drill press without kicking up so much dust. It s truly a game changer!
- The X-Stream Drill Press Dust Collector can be used with most any material on your drill press. Use this system to collect dust and debris from wood, metal, composites and more. Patent Pending.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Fulton Woodworking Tools
See On Amazon #10
Fulton Medium Duty Sawhorse Brackets, 2 Pairs
Asin: B07X22B6WD
Medium Duty.
Sold As 2 Pairs.
Made In Usa.
Flared Nail Holes For Quick Assembly & Easy Storage.
Features
- Extra Long For Added Strength
- Flared Nail Holes For Quick Assembly & Easy Storage
- Medium Duty
- Made in USA
- Sold as 2 Pairs
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
See On Amazon #11
Fulton 4 Inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 10 pack (4" Hose Clamps)
Asin: B07PGVZJ7J | Ean: 0817918022105 | UPC: 817918022105
Often Used In These Applications – These Unique Clamps Are Typically Used In Securing Duct Work, Dryer Vents, Dust Collection Hoses, Piping, Large Cable, Pvc Tubing And More. Ideal For Use In Automotive, Industrial, Mechanical, Agriculture, Boat/Marine, Shield, Recreational Vehicles, Household And More. Works For Both Indoor Or Outdoor Use..
Flexible Adjustable Size Range- 4 Inch Hose Clamps Are Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 4-7/16” (4.440” Or 112.77Mm) In Full Diameter Down To Appx. 3-7/16” (3.440” Or 87.32Mm) At Its Most Compact Diameter..
304 Stainless Steel Hose Clamp- The 4” Diameter Large Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
Large Easy To Turn Key - The Easy To Turn And Easy To See Blue Key Is Made From A Strong And Durable Polymer. The Key Is Designed To Make The Securing And Un-Securing Of Hose Much Easier On The Knuckles. No More Knuckle Busting Flat Head Screw Drivers Or Tiny Socket Wrenches. Simply To Turn The Key Clockwise To Tighten, Counter Clockwise To Loosen..
Features
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
- OFTEN USED IN THESE APPLICATIONS These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
- 304 STAINLESS STEEL HOSE CLAMP- The 4 diameter large hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- FLEXIBLE ADJUSTABLE SIZE RANGE- 4 inch hose clamps are flexible and workable with a rather wide adjustable size range from appx. 4-7/16 (4.440 or 112.77mm) in full diameter down to appx. 3-7/16 (3.440 or 87.32mm) at its most compact diameter.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #12
Peachtree Woodworking Supply 2-1/2 x 10' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA!
Asin: B01M35BE8D | Model: FBA_6165 | PartNumber: FBA_6165 | Ean: 0817918020439 | UPC: 817918020439
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
Ideal For Sawdust Collection And Other General Shop Applications.
Super Flexible Hose For Maneuvering Around All Your Shop Machinery.
Clear Vue To See Any Type Of Obstruction.
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
Made In Usa!.
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Reinforced Pvc With A Wire Helix.
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- MADE IN USA!
- Super flexible hose for maneuvering around all your shop machinery
- Clear Vue to see any type of obstruction
- Reinforced PVC with a wire helix
- Ideal for sawdust collection and other general shop applications
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton Clear Vue
Dimensions: 2.50 x 120.00 x 2.50 inches | Weight: 2.71 Pounds
See On Amazon #13
Fulton Woodworking Tools 4" x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B09PNNN7TN | Model: FWT-375 | PartNumber: FWT-375 | Ean: 0817918023201 | UPC: 817918023201
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Ypically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- ypically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Peachtree Woodworking Supply Inc
Dimensions: 0.04 x 120.00 x 4.00 inches
See On Amazon #14
Fulton 4 inch to 2 inch Dual Reducer Port Y Splitter Dust Collection Fitting
Asin: B0BQP15WKH | Model: 12100 | PartNumber: 12100 | Ean: 0817918023300 | UPC: 817918023300
The Two Separate 2 ½” Ends Of The Fitting Can Be Inserted Into Standard 2 ½” Hose And Secured By A Hose Clamp. Please Note That The 2 ½” End Will Not Fit Inside Of Standard 2 ½” Ports. It Is Designed To Be Inserted Into Standard 2 ½” Hose Or Dust Collection Couplers Specifically Made To Fit 2 ½” Ports Or Flanges..
Made From Abs Plastic, This Fitting Is Designed To Stand Up To Prolonged Daily Workshop Usage. Hose Clamps Are Required For A Proper Seal And Are Not Included With The Fitting. Port Dimensions: 4” Nominal Od – 3.902” Or 3-29/32”, Id 3.733” Or 3-47/64” 2-1/2” Nominal Od – 2.5” Or 2-1/2”, Id – 2.32” Or 2-21/64”.
The 4” To 2 ½” Dual Port Y Splitter Is Ideal Most Any Workshop That Needs To Split The Dust Collector Airflow Into Separate Smaller Machinery. To Reduce Down From A 4” Machine Port, You Will Likely Need To A 4”Hose Section (Not Included) Or A 4” Adapter/Coupler For Proper Installation..
The 4” End Can Be Inserted Into A 4” Section Of Hose And Secured By A Hose Clamp. Please Note That The 4” End Will Not Fit Inside Of Standard 4” Ports. It Is Designed To Be Inserted Into Standard 4” Hose Or Dust Collection Couplers Specifically Made To Fit 4” Ports Or Flanges..
Features
- The 4 to 2 dual port Y splitter provides you with the ability to reduce a 4 port (with an adapter fitting -not included or a simple hose section also not included) down into two separate 2 hose lines. This is perfect for shops that have multiple machines with 2 ports like sanders, benchtop band saws, router tables and more!
- The 4 end can be inserted into a 4 section of hose and secured by a hose clamp. Please note that the 4 end will not fit inside of standard 4 ports. It is designed to be inserted into standard 4 hose or dust collection couplers specifically made to fit 4 ports or flanges.
- The two separate 2 ends of the fitting can be inserted into standard 2 hose and secured by a hose clamp. Please note that the 2 end will not fit inside of standard 2 ports. It is designed to be inserted into standard 2 hose or dust collection couplers specifically made to fit 2 ports or flanges.
- The 4 to 2 dual port Y splitter is ideal most any workshop that needs to split the dust collector airflow into separate smaller machinery. To reduce down from a 4 machine port, you will likely need to a 4 hose section (NOT included) or a 4 adapter/coupler for proper installation.
- Made from ABS plastic, this fitting is designed to stand up to prolonged daily workshop usage. Hose clamps are required for a proper seal and are NOT included with the fitting. PORT DIMENSIONS: 4 Nominal OD 3.902 or 3-29/32 , ID 3.733 or 3-47/64 2-1/2 Nominal OD 2.5 or 2-1/2 , ID 2.32 or 2-21/64
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools
See On Amazon #15
Peachtree Woodworking Supply 2-1/2" x 20' Ultra Flex Clear-Vue Heavy Duty PVC Hose - MADE IN USA
Asin: B01M6C4M9J | Model: 6166 | PartNumber: 6166 | Ean: 0817918020446 | UPC: 817918020446
Clear Vue To See Any Type Of Obstruction.
Ideal For Sawdust Collection.
Reinforced Pvc With A Wire Helix.
Super Flexible Hose For Maneuvering Around All Your Shop Machinery.
Features
- MADE IN USA!
- Super flexible hose for maneuvering around all your shop machinery
- Clear Vue to see any type of obstruction
- Reinforced PVC with a wire helix
- Ideal for sawdust collection
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
Dimensions: 16.00 x 6.60 x 12.40 Inches | Weight: 5.11 Pounds
See On Amazon #16
Fulton 2 in. H x 4 in. W Sawhorse Brackets 400 lb. Capacity Black 1 pk
Asin: B003SWE41S | Model: 300SHB | PartNumber: 300SHB | Ean: 0045081003007 | UPC: 045081003007
Speedee.
Brand: Fulton | Manufacturer: FULTON CORPORATION
Dimensions: 12.15 x 193.08 x 12.08 inches | Weight: 0.00 pounds
See On Amazon #17
Fulton Woodworking Tools 1000 Zinc Coated #8 x 1 " Washer Head Pocket Hole Self Tapping Wood Screws 500 Coarse Thread Screws and Two 6" #2 Square Drivers
Asin: B0CCB49PYQ | Ean: 0817918023959 | UPC: 817918023959
Each Screw Features A Washer Style Head With A Square Driver. The Washer Style Head Keeps The Screw From Being Drilled Too Far Into The Stock. It’S Almost Like Having A Built In Depth Stop For Screws. The Number 2 Square Driver Head Works With The Included 6” Number 2 Square Driver. Square Drivers Tend To Work Much Better And More Efficiently Than Standard Screwdriver Tips. This Means Less Slippage When Driving The Screws..
This #8 X 1 ¼ Inch Pocket Hole Screw Pack Includes 1000 Screws (500 Fine Screws And 500 Coarse Screws) And Two 6 Inch Long #2 Square Tip Drivers With Round Shanks. The Round Shank Prevents Marring And Also Prevents Hand Discomfort In The Event That You Need To Hold The Bit Steady When Drive A Pocket Hole Screw..
This Screw Type Also Features A Zinc Coating And A Super Sharp, Self Tapping Tip. The Zinc Coating Makes These Screws Perfect For Indoor Use. The Coating Also Makes The Screw Driving Process Much Smoother Than Standard Un-Coated Screws. The Sharp, Self Tapping Tip Really Bites Into Your Stock And Always Hits The Mark..
With Pocket Holes, You Are Always Going To Hit The Spot When Driving The Screws. After Each Pocket Hole Is Drilled (With A Jig That Is Not Included), You Simply Place The Screw Into The Center Of The Pocket Hole Which Has A Step Down Hole In The Center. This Makes The Driving Process A Breeze. Please Note That A Pocket Hole Jig And Drill Bit Are Required To Create A Correctly Placed Pocket Hole. Pocket Hole Jig And Drill Bit Are Not Included..
Features
- Designed and optimized for use with standard size pocket holes these screws are perfect for helping you build most any type of project around the house or workshop. Measuring in at 1 inches long, these screws are perfect for standard inch stock.
- With pocket holes, you are always going to hit the spot when driving the screws. After each pocket hole is drilled (with a jig that is NOT included), you simply place the screw into the center of the pocket hole which has a step down hole in the center. This makes the driving process a breeze. Please note that a pocket hole jig and drill bit are required to create a correctly placed pocket hole. Pocket hole jig and drill bit are NOT included.
- Each screw features a washer style head with a square driver. The washer style head keeps the screw from being drilled too far into the stock. It s almost like having a built in depth stop for screws. The number 2 square driver head works with the included 6 number 2 square driver. Square drivers tend to work much better and more efficiently than standard screwdriver tips. This means less slippage when driving the screws.
- This screw type also features a zinc coating and a super sharp, self tapping tip. The zinc coating makes these screws perfect for indoor use. The coating also makes the screw driving process much smoother than standard un-coated screws. The sharp, self tapping tip really bites into your stock and always hits the mark.
- This #8 x 1 inch pocket hole screw pack includes 1000 screws (500 fine screws and 500 coarse screws) and two 6 inch long #2 square tip drivers with round shanks. The round shank prevents marring and also prevents hand discomfort in the event that you need to hold the bit steady when drive a pocket hole screw.
- See more on Amazon...
Brand: Fulton Woodworking Tools | Manufacturer: Fulton Woodworking Tools
See On Amazon #18
Peachtree Woodworking Supply 4" x 50' Ultra Flex Clear-Vue Heavy Duty PVC Dust Collection Hose - MADE IN USA!
Asin: B01MREJ3Z3 | Model: 6170 | PartNumber: 6170 | Ean: 0817918020484 | UPC: 817918020484
Clear Vue To See Any Type Of Obstruction.
Ideal For Sawdust Collection.
Reinforced Pvc With A Wire Helix.
Super Flexible Hose For Maneuvering Around All Your Shop Machinery.
Features
- MADE IN USA!
- Super flexible hose for maneuvering around all your shop machinery
- Clear Vue to see any type of obstruction
- Reinforced PVC with a wire helix
- Ideal for sawdust collection
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Fulton
Dimensions: 4.00 x 600.00 x 4.00 inches | Weight: 18.70 Pounds
See On Amazon #19
Fulton 4" Magnetic Parts and Tool Tray
Asin: B0719WSTX9 | Ean: 0814310014165 | UPC: 814310014165
Attaches To Most Any Workshop Machinery.
The Ideal Storage Solution For Small Metal Parts.
Can Be Used In The Shop Or Anywhere Around The House.
Magnetic Base Covered In Non-Marring Rubber Material.
Features
- Perfect for storing drill bits, screws, pins and more!
- Magnetic base covered in non-marring rubber material
- Attaches to most any workshop machinery
- Can be used in the shop or anywhere around the house
- The ideal storage solution for small metal parts
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
See On Amazon #20
Fulton 4 Inch Reversible Magnetic Nylon Vise Jaw Pads for Protecting Stock on Metal Vises Clamp and Secure Round Curved without Marring
Asin: B082DPV8SG | Model: 698 | PartNumber: 698 | Ean: 0817918022334 | UPC: 817918022334
Each Pad Has Two Different Sides. One Side Is Flat For Accepting Flat Or Semi-Curved Stock Pieces. This Side Works Exceptionally Well For General Woodworking Projects And Hobbyists. The Flat Side Keep Workpieces From Being Marred And Keeps Them Stable While Working. The Other Side Of The Pads Are Prismatic, V-Grooved Pads That Will Accept Round Tube Stock Pieces With Ease. It Makes Holding And Working On Pipes, Dowels, Threaded Stock, Barrels, Automotive Pieces And More Super Easy..
The Pads Are Held Onto Your Metal Vise With Strong Rare Earth Magnets. Each Pad Has Four Magnets Which Makes Placing And Removing The Jaw Pads Off And On The Vise Jaws Quick And Easy. The Pads Are Made From A Strong Nylon Material That Is Designed To Last And Be Used In Workshop Settings. Set Includes 2 Vise Jaw Pads (1 For Each Vise Jaw).
With The Pads You Will Be Able To Hold And Secure More Stock Pieces, General Objects And More Without Worrying About Damaging Or Having The Item Shift While Working. When Using The Grooved Side You Can Work On Pieces Horizontally, Vertically And Even At 45 Degree Angles! Better Yet, There Are Multiple Sized Grooves For Each Angle So You Can Work On Small Or Larger Projects..
Another Issue With Metal Vises, Is That They Will Dig Into And Mar Our Round And Even Flat Work Pieces. This Is Especially True When Working With Softer Metals, Wood And Other Materials. These Pads Eliminate This Problem As Well Since They Are Made From A Receptive Nylon Material And Not Metal. This Means Our Woodworking, Tooling, Gunsmith, Automotive, Jewelry, Fishing Tackle, Bicycle, Plumbing And Hobby Projects Can Now All Be Secured In Our Vise Without Worrying About Marking Them..
Features
- When we use our metal jaw vises, we typically will use it to work on flat stock pieces. If we try to grip round stock with the flat, metal vise jaws, its usually not very stable. Any type of downward or side pressure usually knocks the stock piece out of the jaws or out of place. The Reversible Magnetic Vise Pads remedy this problem with matched grooves on each pad. The grooves align perfectly so your vise can now comfortably and securely grip round stock pieces without issue.
- Another issue with metal vises, is that they will dig into and mar our round and even flat work pieces. This is especially true when working with softer metals, wood and other materials. These pads eliminate this problem as well since they are made from a receptive nylon material and not metal. This means our woodworking, tooling, gunsmith, automotive, jewelry, fishing tackle, bicycle, plumbing and hobby projects can now all be secured in our vise without worrying about marking them.
- Each pad has two different sides. One side is flat for accepting flat or semi-curved stock pieces. This side works exceptionally well for general woodworking projects and hobbyists. The flat side keep workpieces from being marred and keeps them stable while working. The other side of the pads are prismatic, v-grooved pads that will accept round tube stock pieces with ease. It makes holding and working on pipes, dowels, threaded stock, barrels, automotive pieces and more super easy.
- With the pads you will be able to hold and secure more stock pieces, general objects and more without worrying about damaging or having the item shift while working. When using the grooved side you can work on pieces horizontally, vertically and even at 45 degree angles! Better yet, there are multiple sized grooves for each angle so you can work on small or larger projects.
- The pads are held onto your metal vise with strong rare earth magnets. Each pad has four magnets which makes placing and removing the jaw pads off and on the vise jaws quick and easy. The pads are made from a strong nylon material that is designed to last and be used in workshop settings. Set Includes 2 Vise Jaw Pads (1 for each vise jaw)
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon
Looking For Something Else?
Search