IS-RF140 Lens Collar Support for RF 100-400mm F/5.6-8 is Lens Built-in Quick Release Plate Dovetail Replacement Foot Tripod Mount Stand Base for RF 100-400mm F/5.6-8 is
Asin: B0D2HW81GM | Ean: 7619440213609
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Aviation Aluminum Material, Machining, Lightweight Hollow Design, Polished And Anodized Finish On The Surface, Exquisite Workmanship And For Long Service Life..
Bottom Is 39Mm Arca-Swiss Standard Dovetail Quick Release Plate, For / Arca-Swiss Tripod For Head Clamp Of Arca 39Mm Fit, Suitable For Is-Jz30, Is-Jz50, Is-Jz64, Is-Qj58 And More..
Plate Length Is About 50Mm, Built-In Arca Standard Quick Release Plate For Tripod For Head, Equipped With 1/4" And 3/8" Screw Holes, And Stainless-Steel Anti-Slip Screws, Allows You To Fix The Lens To The Tripod Directly..
Lens Collar Support Is Specially Designed For Rf 100-400Mm F/5.6-8 Is Lens..
Features
- Inner wall of the tripod is irregular in structure, and the switch hole is reserved, which does not affect the use of the switch on the lens, the tripod cannot be rotated, and only supports horizontal
- Lens collar support is specially designed for RF 100-400mm f/5.6-8 IS lens.
- aviation aluminum material, machining, lightweight hollow design, polished and anodized finish on the surface, exquisite workmanship and for long service life.
- Plate length is about 50mm, built-in Arca standard quick release plate for tripod for head, equipped with 1/4 and 3/8 screw holes, and stainless-steel anti-slip screws, allows you to fix the lens to the tripod directly.
- Bottom is 39mm Arca-Swiss standard dovetail quick release plate, for / ARCA-SWISS tripod for head clamp of Arca 39mm fit, suitable for IS-JZ30, IS-JZ50, IS-JZ64, IS-QJ58 and more.
- See more on Amazon...
Brand: Tzxncbzxc | Manufacturer: Tzxncbzxc
See On Amazon Similar To ISRF140 Lens Collar Support for
#1
SMALLRIG 15mm Long Lens Support Bracket Height Adjustable for DSLR Camera Shoulder Rig (New) - 1087
Asin: B00E3OATAK | Model: Long-Lens-Support | PartNumber: Long-Lens-Support | Ean: 0608113558724, 0686948880944, 4139052103233, 0600928663594 | UPC: 686948880944, 608113558724, 600928663594
There Are Two Rubber Washers To Protect The Finish Off Of Your Lens From Wearing. Gloove/Slot Design, Allow To Use Velcro To Fasten Your Big Lens..
Note: Dual Rod Clamps Please Search "Smallrig 1761" Or Smallrig 1783 Or Smallrig 1784..
Wildely Compatible With Different Lens. The Diameter Range Of Lens Support: 50Mm To 140Mm ; Adjustable In Height..
The Y Shaped Long Lens Support Screws Onto The 15Mm Rod Clamp To The Long Telephone Lens While Shooting..
Features
- This Lens support system is perfect for long lenses and is compatible with any industry-standard 15mm rod system, help to create a more stable, vibration-free platform for shooting.
- The Y shaped long lens support screws onto the 15mm rod clamp to the long telephone lens while shooting.
- There are two rubber washers to protect the finish off of your lens from wearing. Gloove/Slot design, allow to use Velcro to fasten your big lens.
- Wildely compatible with different lens. The diameter range of lens support: 50mm to 140mm ; Adjustable in height.
- NOTE: Dual Rod Clamps Please Search SmallRig 1761 OR SmallRig 1783 OR SmallRig 1784.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.99 x 1.30 x 3.94 inches | Weight: 0.31 pounds
See On Amazon #2
Haoge LMR-SM140S Lens Collar Replacement Foot Tripod Mount Ring Stand Base for Sigma 100-400mm F5-6.3 DG DN OS Lens Sony E Mount Art 105mm F1.4 DG HSM Built-in Arca Type Quick Release Plate
Asin: B08FSY8ZSP | Model: LMR-SM140S | PartNumber: LMR-SM140S
Reserved 1/4" And 3/8" Screw Holes At The Bottom For Attach Lens To Tripod Directly.Built-In Strap Hole For Carry..
(Note: It Can't Be Used For Canon Or Nikon Mount).
Replace : Sigma Ts-111 Tripod Mount Ring.
It Features Arca-Compatible Dovetail Which Allow You Attach Your Lens To Ball Head, Clamp Or Panorama Head Of Arca-Swiss Standard..
Features
- The LMR-SM140S Tripod Mount Ring from Haoge is designed for Sigma 100-400mm F5-6.3 DG DN OS Lens (of E-Mount or L-Mount or Fuji X-Mount)
- It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard.
- Reserved 1/4 and 3/8 screw holes at the bottom for attach lens to tripod directly.Built-in strap hole for carry.
- replace : Sigma TS-111 tripod mount ring
- (Note: it can't be used for Canon or Nikon mount)
- See more on Amazon...
Brand: Haoge | Manufacturer: Haoge
Weight: 0.70 pounds
See On Amazon #3
SmallRig 15mm Long Lens Support, 53.5mm Height Adjustable Lens Bracket for DSLR Camera Shoulder Rig - BSL2681
Asin: B08727W81F | Model: BSL2681-CF-FBA-US | PartNumber: BSL2681-CF-FBA-US | Ean: 6972070629082
【Security Design】The Y Shape Bracket Has Two Rubber Cushions On Top To Increase Friction And Protect The Surface Of Lens. It Also Features A Strap Slot On Each Side For Further Security.
【For 50-140Mm Lens】It Is Mounted On Standard Lws-Spaced 15Mm Rods And Compatible With The Lens Of 50 To 140Mm Diameter.
【Quick Adjustment】The Lens Support Offers 53.5Mm Vertical Adjustment To Fit Most Lens. You Can Adjustable The Height Of The Y Shape Bracket Via The Centered Quick Release Knob.
【Reduce The Pressure】When Connected To A Cinema Lens's Support Foot Or A Still Photo Lens's Tripod Collar, This Lens Support Removes The Weight Stress From The Camera's Lens Mount. It Relieves The Potentially Damaging Pressure On The Camera's Lens Mount.
Features
- NEW VERSION SmallRig lens support BSL2681 is the updated version of SmallRig lens support 1784. It is designed to take much of the weight of heavier lens off the camera's lens mount
- REDUCE THE PRESSURE When connected to a cinema lens's support foot or a still photo lens's tripod collar, this lens support removes the weight stress from the camera's lens mount. It relieves the potentially damaging pressure on the camera's lens mount
- SECURITY DESIGN The Y shape bracket has two rubber cushions on top to increase friction and protect the surface of lens. It also features a strap slot on each side for further security
- QUICK ADJUSTMENT The lens support offers 53.5mm vertical adjustment to fit most lens. You can adjustable the height of the Y shape bracket via the centered quick release knob
- FOR 50-140MM LENS It is mounted on standard LWS-spaced 15mm rods and compatible with the lens of 50 to 140mm diameter
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.30 x 4.09 x 4.25 Inches | Weight: 0.31 pounds
See On Amazon #4
NEEWER Camera Lens Support with Dual 15mm Rod Rail Clamp, Universal LWS Y Bracket with 2.2"/55mm Height Adjustment for Heavy Lenses, Compatible with SmallRig Cage Sony A7 Canon R5 BMPCC 6K Pro, CA012
Asin: B0C1C789GH | Model: 10102034 | PartNumber: 10102034
【Easy Height Adjustment】 Lens Support Is Vertically Adjustable To Ensure The Lens Can Sit Flush. Two Center Column Tubes Can Be Extended To Add Up To 2.2" (55Mm) Of Additional Height. They Can Work Independently Or Stack Together For Different Height Options.
【Durable Metal Structure】 Made Of Durable Black Anodized Aluminum Alloy, The Lens Support Is Processed With Cnc Precision Machining For Uncertain Outdoor Circumstances. Yet It Is Surprisingly Lightweight (3.95Oz/112G) And Easy To Fit Inside Your Gear Bag For Transportation.
【Protective Rubber Pads】 Nonslip And Soft Rubber Pads Fit Better To The Lenses And Protect Them From Scratches, And Also Absorb Possible Vibration Caused By Movements And Accessory Changes.
【15Mm Rods Attachment】 With Rod Clamps, This Light Weight Lens Support Is Compatible With Neewer Sr001, Sr002, Sr003, Sr004 Shoulder Rigs Or Vs107 Camera Cage (All Sold Separately) Through The Standard 15Mm Rod Rail System.
Features
- LWS for Heavy Lenses This CA012 Y shaped bracket can secure and stabilize long and heavy camera lenses with a diameter from 50 to 140mm for stable video recording, no rolling wheel design to make it fit the lens better
- 15mm Rods Attachment With rod clamps, this light weight lens support is compatible with NEEWER SR001, SR002, SR003, SR004 shoulder rigs or VS107 camera cage (all sold separately) through the standard 15mm rod rail system
- Easy Height Adjustment Lens support is vertically adjustable to ensure the lens can sit flush. Two center column tubes can be extended to add up to 2.2 (55mm) of additional height. They can work independently or stack together for different height options
- Protective Rubber Pads Nonslip and soft rubber pads fit better to the lenses and protect them from scratches, and also absorb possible vibration caused by movements and accessory changes
- Durable Metal Structure Made of durable black anodized aluminum alloy, the lens support is processed with CNC precision machining for uncertain outdoor circumstances. Yet it is surprisingly lightweight (3.95oz/112g) and easy to fit inside your gear bag for transportation
- See more on Amazon...
Brand: Neewer | Manufacturer: NEEWER
Weight: 0.13 pounds
See On Amazon #5
SMALLRIG Universal 15mm LWS Rod Mount Lens Support Bracket Height Adjustable for DSLR Camera Shoulder Rig - 2727
Asin: B08FSW3B1H | Model: 2727-SR | PartNumber: 2727-SR
【Vertical Adjustment Range】You Can Adjust The Vertical Height Within A 2.1" (30.5Mm) Range Via A Quick Release Thumbscrew. Please Note: Before Using, Loosen Thumbscrew First..
【Built-In Pulley】The V-Shaped Bracket Has A Built-In Pulley, And The Usable Position Is Not Limited By The Position Of The Zoom Ring Or The Focus Ring. It Provides Stable Support & Simple Installation, Which Makes Users Feel Comfortable..
【Fits Up To 4.25" Lens Diameter】The Support Protects The Lens With An External Diameter Of 73-108Mm..
【Fits Standard 15Mm Lws Rods】Smallrig 2727 Is Compatible With 15Mm Lws Rod Systems, Which Adds Support For Your Longer Lenses..
Features
- UNIVERSALITY SMALLRIG Lens Support 2727 is designed to provide lens support and protect the mount for the lens. This lens support is suitable for lenses with weight within 2kg.
- FITS STANDARD 15MM LWS RODS SmallRig 2727 is compatible with 15mm LWS rod systems, which adds support for your longer lenses.
- VERTICAL ADJUSTMENT RANGE You can adjust the vertical height within a 2.1 (30.5mm) range via a quick release thumbscrew. Please note: Before using, loosen thumbscrew first.
- FITS UP TO 4.25 LENS DIAMETER The support protects the lens with an external diameter of 73-108mm.
- BUILT-IN PULLEY The V-shaped bracket has a built-in pulley, and the usable position is not limited by the position of the zoom ring or the focus ring. It provides stable support & simple installation, which makes users feel comfortable.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 4.21 x 1.06 x 3.05 inches | Weight: 0.21 pounds
See On Amazon #6
SmallRig 15mm Long Lens Support, Height Adjustable Lens Bracket for DSLR Camera Shoulder Rig - BSL2680
Asin: B0881P54FD | Model: BSL2680-CF-FBA-US | PartNumber: BSL2680-CF-FBA-US | Ean: 6972070629075
【Security Design】The Y Shape Bracket Has Two Rubber Cushions On Top To Increase Friction And Protect The Surface Of The Lens. It Also Features A Strap Slot On Each Side For Further Security.
【Compatibility】It Is Mounted On Standard Lws-Spaced 15Mm Rods And Compatible With The Lens Of 50 To 140Mm Diameter.
【Quick Adjustment】The Lens Support Offers 34.5Mm Vertical Adjustment To Fit Most Lenses. You Can Adjustable The Height Of The Y Shape Bracket Via The Centered Quick-Release Knob.
【Reduce The Pressure】When Connected To A Cinema Lens's Support Foot Or A Still Photo Lens's Tripod Collar, This Lens Support Removes The Weight Stress From The Camera's Lens Mount. It Relieves The Potentially Damaging Pressure On The Camera's Lens Mount.
Features
- NEW VERSION SmallRig lens support BSL2680 is the updated version of SmallRig lens support 1087. It is designed to take much of the weight of heavier lenses off the camera's lens mount
- REDUCE THE PRESSURE When connected to a cinema lens's support foot or a still photo lens's tripod collar, this lens support removes the weight stress from the camera's lens mount. It relieves the potentially damaging pressure on the camera's lens mount
- SECURITY DESIGN The Y shape bracket has two rubber cushions on top to increase friction and protect the surface of the lens. It also features a strap slot on each side for further security
- QUICK ADJUSTMENT The lens support offers 34.5mm vertical adjustment to fit most lenses. You can adjustable the height of the Y shape bracket via the centered quick-release knob
- COMPATIBILITY It is mounted on standard LWS-spaced 15mm rods and compatible with the lens of 50 to 140mm diameter
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 1.30 x 3.35 x 4.25 inches | Weight: 0.44 pounds
See On Amazon #7
iShoot Metal Lens Collar Stand Tripod Mount Ring Base Replacement Foot Compatible with Panasonic Leica DG Vario-Elmar 100-400mm f/4-6.3 ASPH Power OIS, Lens Support Holder with Arca Fit QR-Plate
Asin: B08SC9KYVG | Model: FBA-IS-THP140 | PartNumber: FBA-IS-THP140 | Ean: 0783525968245 | UPC: 783525968245
3. The Bottom Quick Release Plate Of The Replacement Foot Is About 46Mm In Length, Adopts Arca-Swiss / Rrs Standard Fit, Can Be Used With 39Mm Arca-Swiss Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collar Foot Without Dovetail Groove;.
5. The Tripod Mount Ring Replacement Base Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Polished And Surface Anodized Finish. The Appearance And Exquisite Workmanship Are Much Better Than Similar Products Made By Mold..
4. The Lens Support Foot Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screw For Fixing Lens To Tripod Directly;.
2. The Tripod Mount Ring Base Adopts The Original Factory Standard, And The Shape Is Redesigned, The Volume Is About 86 X 39 X 29Mm, And The Net Weight Is About 85G; The Locking Screw Has A Built-In Spring;.
Features
- 1. The lens collar foot is tailor-made for Panasonic Leica DG Vario-Elmar 100-400mm f/4-6.3 ASPH. POWER O.I.S., can't be used for other lenses;
- 2. The tripod mount ring base adopts the original factory standard, and the shape is redesigned, the volume is about 86 x 39 x 29mm, and the net weight is about 85g; the locking screw has a built-in spring;
- 3. The bottom quick release plate of the replacement foot is about 46mm in length, adopts ARCA-SWISS / RRS standard fit, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collar foot without dovetail groove;
- 4. The Lens support foot bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
- 5. The tripod mount ring replacement base is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #8
Haoge LF-PL14 Lens Collar Replacement Foot for Panasonic LUMIX G Leica DG Vario-Elmar 100-400mm f4.0-6.3 ASPH H-RS100400 Lens Tripod Mount Ring Base Stand Built-in Arca Swiss Quick Release Plate
Asin: B07WFLVT8B | Model: LF-PL14 | PartNumber: LF-PL14
Two Safety Stop Screws In Both Side To Prevent Drop By Accident..
Reserved 1/4" And 3/8" Screw Holes At The Bottom..
It Features Arca-Compatible Dovetail Which Allow You Attach Your Lens To Ball Head, Clamp Or Panorama Head Of Arca-Swiss Standard..
Features
- This LF-PL14 Lens Foot from Haoge is an replacement foot for Panasonic LUMIX G Leica DG Vario-Elmar 100-400mm f4.0-6.3 ASPH H-RS100400 Lens.
- It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard.
- Two safety stop screws in both side to prevent drop by accident.
- Reserved 1/4 and 3/8 screw holes at the bottom.
- See more on Amazon...
Brand: Haoge | Manufacturer: Haoge
See On Amazon #9
iShoot Lens Collar Replacement Foot Tripod Mount Ring Base Compatible with Panasonic Leica DG Vario-Elmar 100-400mm f/4-6.3 ASPH Power OIS, Lens Support Holder with Arca Fit Dovetail
Asin: B08FDJRG8Z | Model: PH03-IS-THP140 | PartNumber: PH03-IS-THP140 | Ean: 0737838352277 | UPC: 737838352277
3. The Bottom Quick Release Plate Of The Replacement Foot Is About 46Mm In Length, Adopts Arca-Swiss / Rrs Standard Fit, Can Be Used With 39Mm Arca-Swiss Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collar Foot Without Dovetail Groove;.
5. The Tripod Mount Ring Replacement Base Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Polished And Surface Anodized Finish. The Appearance And Exquisite Workmanship Are Much Better Than Similar Products Made By Mold..
4. The Lens Support Foot Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screw For Fixing Lens To Tripod Directly;.
2. The Tripod Mount Ring Base Adopts The Original Factory Standard, And The Shape Is Redesigned, The Volume Is About 86 X 39 X 29Mm, And The Net Weight Is About 85G; The Locking Screw Has A Built-In Spring;.
Features
- 1. The lens collar foot is tailor-made for Panasonic Leica DG Vario-Elmar 100-400mm f/4-6.3 ASPH. POWER O.I.S., can't be used for other lenses;
- 2. The tripod mount ring base adopts the original factory standard, and the shape is redesigned, the volume is about 86 x 39 x 29mm, and the net weight is about 85g; the locking screw has a built-in spring;
- 3. The bottom quick release plate of the replacement foot is about 46mm in length, adopts ARCA-SWISS / RRS standard fit, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collar foot without dovetail groove;
- 4. The Lens support foot bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
- 5. The tripod mount ring replacement base is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #10
Haoge LMR-RF140 Lens Collar Tripod Mount Ring for Canon RF100-400mm F5.6-8 is USM Lens Stand Base Built-in Arca Type Quick Release Plate
Asin: B09PL8F48S
Flannel Attached To The Inner Ring Protect The Lens.
Aluminum Metal Manufacture.
Designed With Arca-Compatible Dovetail, Photographer Could Set Up Camera And Lens Quickly..
It Features Arca-Compatible Dovetail Which Allow You Attach Your Lens To Ball Head, Clamp Or Panorama Head Of Arca-Swiss Standard.
Features
- Haoge LMR-RF140 Tripod Mount Ring is designed for Canon RF100-400mm F5.6-8 IS USM Lens for Canon RF Lens Tripod Mount Ring
- It features Arca-compatible dovetail which allow you attach your lens to Ball Head, Clamp or Panorama Head of Arca-Swiss standard
- Flannel attached to the inner ring Protect the lens
- Designed with Arca-compatible dovetail, photographer could set up camera and lens quickly.
- Aluminum metal manufacture
- See more on Amazon...
Brand: Haoge | Manufacturer: Haoge
See On Amazon #11
iShoot Lens Collar Support Tripod Mount Ring for Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens, Bottom is ARCA Type Quick Release Plate Compatible with Tripod Ball Head of ARCA-Swiss/Kirk Fit
Asin: B07FVW1CFR | Model: 900692 | PartNumber: 900692 | Ean: 5056020296409, 5056020296393
3. The Tripod Mount Ring Is Tailored To The Lens. Cannot Be Rotated, With 3M Film Inside, Inner Diameter Is About 84Mm, Width Is About 23Mm;.
5. Quick Release Plate Is As 39Mm Standard, Compatible With Rrs / Arca-Swiss / Kirk / Wimberley / Markins / Sunwayfoto / Kangrinpoche / Benro / Sirui / Marsace / Ishoot Tripod Ball Head Of Arca 39Mm Fit, For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk Clamp..
4. Bottom Is Added Quick Release Plate Feature, Plate Length Is About 70Mm, With 1/4 And 3/8 Screw Holes And Stainless Steel Anti-Slip Screw, Net Weight Is About 160G;.
2. The Lens Collar Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Surface Polished And Anodized, With Stainless Steel Screw;.
Features
- 1. The lens collar is tailor-made and only Compatible with Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens (EF and F Mount), Not Compatible with Sigma 100-400mm f/5-6.3 DG DN OS (E-mount and L-Mount) and other lenses
- 2. The lens collar is made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, surface polished and anodized, with stainless steel screw;
- 3. The tripod mount ring is tailored to the lens. Cannot be rotated, with 3M film inside, inner diameter is about 84mm, width is about 23mm;
- 4. Bottom is added quick release plate feature, plate length is about 70mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screw, net weight is about 160g;
- 5. Quick release plate is AS 39mm standard, compatible with RRS / ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit, for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK clamp.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #12
iShoot Lens Collar Tripod Mount Ring Support Holder BracketCompatible with Sigma 105mm f/1.4 DG HSM Art (EF/FX/FE/L Mount) & Sigma 100-400mm f/5-6.3 DG DN OS (E/L Mount) Lens, Bottom is Arca Fit Plate
Asin: B08JCFM4TV | Model: FBA2-IS-SM105ART | PartNumber: FBA2-IS-SM105ART | Ean: 0737838352697 | UPC: 737838352697
3. The Tripod Collar Bottom Is Added 65Mm Long Arca Fit Quick Release Plate Feature, Can Be Used With 39Mm Arca-Swiss Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Dovetail Groove;.
5. The Tripod Ring Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Polished And Surface Anodized Finish. The Appearance And Exquisite Workmanship Are Much Better Than Similar Products Made By Mold..
4. The Lens Support Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly;.
2. The Net Weight Of The Tripod Mount Ring Is About 170G, Inner Diameter Is About 82Mm, Width Is About 18Mm, The Inner Wall Has Grooves And Notches, And 3M Plastic Protective Film Is Attached; Locking Knob With Non-Slip Design；.
Features
- 1. The lens collar is designed and improved with reference to and compatible with Sigma original TS-111; the tripod collar is tailor-made and compatible with Sigma 105mm f/1.4 DG HSM Art (EF/FX/FE/L Mount) & Sigma 100-400mm f/5-6.3 DG DN OS (E / L Mount); Not Compatible with Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary (EF / F Mount) lens and other lenses; please check your lens mount carefully before purchasing the item;
- 2. The net weight of the tripod mount ring is about 170g, inner diameter is about 82mm, width is about 18mm, the inner wall has grooves and notches, and 3M plastic protective film is attached; locking knob with non-slip design
- 3. The tripod collar bottom is added 65mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without dovetail groove;
- 4. The Lens support bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly;
- 5. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.37 Pounds
See On Amazon #13
iShoot Lens Collar Replacement Foot Tripod Mount Ring Base Compatible with Panasonic Leica DG Vario-Elmar 100-400mm f/4-6.3 ASPH Power OIS, Lens Support Bracket with Arca Fit Quick Release Plate
Asin: B08FDJTP8S | Model: PH05-IS-THP140 | PartNumber: PH05-IS-THP140 | Ean: 0737838352291 | UPC: 737838352291
3. The Bottom Quick Release Plate Of The Replacement Foot Is About 46Mm In Length, Adopts Arca-Swiss / Rrs Standard Fit, Can Be Used With 39Mm Arca-Swiss Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collar Foot Without Dovetail Groove;.
5. The Tripod Mount Ring Replacement Base Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Polished And Surface Anodized Finish. The Appearance And Exquisite Workmanship Are Much Better Than Similar Products Made By Mold..
4. The Lens Support Foot Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screw For Fixing Lens To Tripod Directly;.
2. The Tripod Mount Ring Base Adopts The Original Factory Standard, And The Shape Is Redesigned, The Volume Is About 86 X 39 X 29Mm, And The Net Weight Is About 85G; The Locking Screw Has A Built-In Spring;.
Features
- 1. The lens collar foot is tailor-made for Panasonic Leica DG Vario-Elmar 100-400mm f/4-6.3 ASPH. POWER O.I.S., can't be used for other lenses;
- 2. The tripod mount ring base adopts the original factory standard, and the shape is redesigned, the volume is about 86 x 39 x 29mm, and the net weight is about 85g; the locking screw has a built-in spring;
- 3. The bottom quick release plate of the replacement foot is about 46mm in length, adopts ARCA-SWISS / RRS standard fit, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collar foot without dovetail groove;
- 4. The Lens support foot bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
- 5. The tripod mount ring replacement base is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #14
Haoge LMR-SM140S Lens Collar Replacement Foot Tripod Mount Ring Stand Base And Haoge UV-67 67mm Ultra Slim MC UV Protection Multicoated Ultraviole for Sigma 100-400mm F5-6.3 DG DN OS Lens Sony E Mount
Asin: B08JYC8TQ3
Haoge 67Mm Ultra Slim Mc Uv Filter Is A General Use, Clear Filter Designed To Absorb Ultraviolet Light And Reduce The Bluish Cast Of Daylight To Give Clearer Pictures With Less Haze..
Features
- The LMR-SM140S Tripod Mount Ring from Haoge is designed for Sigma 100-400mm F5-6.3 DG DN OS Lens (of E-Mount or L-Mount)
- Haoge 67mm Ultra Slim MC UV Filter is a general use, clear filter designed to absorb ultraviolet light and reduce the bluish cast of daylight to give clearer pictures with less haze.
- See more on Amazon...
Brand: Haoge
See On Amazon #15
Aluminum Alloy Tripod Mount Adapter Base IS-RF140 Lens Collar Support for RF 100-400mm F/5.6-8 is IS-RF140 Lens Collar Support Holder Bracket
Asin: B0D2RM31FV | Ean: 7620020428016
A 50Mm Long Arca Standard Quick Release Plate Is Added To The Bottom Of The Tripod Which Can Be Directly With A 39Mm Arca-Swiss Tripod Ball For Head, Panoramic Gimbal, Clip, 1/4" And 3/8" Screw Holes And Stainless Steel Anti-Slip Screws Are Also Reserved. , You Can Attach The Lens Directly To The Tripod..
The Inner Wall Of The Tripod With Irregular Irregular Structure Has Reserved Switch Holes, Which Does Not Affect The Use Of The Switch On The Lens, It Cannot Be Rotated, And Only Supports Horizontal Not Vertical.
Lens Collar Support Is Custom-Made According To The And Structure Of The Lens And Is Only For Rf 100-400Mm F/5.6-8 Is Lens..
The Dovetail Slot At The Bottom Of The Lens Mount Is 39Mm Arca-Swiss Standard, For Ishoot Arca-Swiss / Tripod For Head For Arca 39Mm, Suitable For Ishoot Is-Jz50/ Is-Jz64/Is-Qj58/Is-Jz60bk/Is-Jz70mft/Is-Jz80bk.
Features
- aviation aluminum, machining, hollow weight reduction design, polishing and surface anodizing treatment, beautiful appearance and fine workmanship.
- The dovetail slot at the bottom of the lens mount is 39mm Arca-Swiss standard, for ISHOOT ARCA-SWISS / tripod for head for Arca 39mm, suitable for iShoot IS-JZ50/ IS-JZ64/IS-QJ58/IS-JZ60BK/IS-JZ70MFT/IS-JZ80BK
- A 50mm long Arca standard quick release plate is added to the bottom of the tripod which can be directly with a 39mm Arca-swiss tripod ball for head, panoramic gimbal, clip, 1/4 and 3/8 screw holes and stainless steel anti-slip screws are also reserved. , you can attach the lens directly to the tripod.
- Lens collar support is custom-made according to the and structure of the lens and is only for RF 100-400mm f/5.6-8 IS lens.
- The inner wall of the tripod with irregular irregular structure has reserved switch holes, which does not affect the use of the switch on the lens, it cannot be rotated, and only supports horizontal not vertical
- See more on Amazon...
Brand: Mllepjdh | Manufacturer: Mllepjdh
See On Amazon #16
Metal Tripod Mount Base IS-RF140 Lens Collar Support Port for RF 100-400mm F/5.6-8 is Lens IS-RF140 Lens Collar Support Holder Bracket
Asin: B0D2RLWT7V | Ean: 7620020428733
Aviation Aluminum Material, Machining, Lightweight Hollow Design, Polished And Anodized Finish On The Surface, Exquisite Workmanship And For Long Service Life..
Inner Wall Of The Tripod Is Irregular In Structure, And The Switch Hole Is Reserved, Which Does Not Affect The Use Of The Switch On The Lens, The Tripod Cannot Be Rotated, And Only Supports Horizontal.
Bottom Is 39Mm Arca-Swiss Standard Dovetail Quick Release Plate, For / Arca-Swiss Tripod For Head Clamp Of Arca 39Mm Fit, Suitable For Is-Jz30, Is-Jz50, Is-Jz64, Is-Qj58 And More..
Plate Length Is About 50Mm, Built-In Arca Standard Quick Release Plate For Tripod For Head, Equipped With 1/4" And 3/8" Screw Holes, And Stainless-Steel Anti-Slip Screws, Allows You To Fix The Lens To The Tripod Directly..
Features
- Lens collar support is specially designed for RF 100-400mm f/5.6-8 IS lens.
- Plate length is about 50mm, built-in Arca standard quick release plate for tripod for head, equipped with 1/4 and 3/8 screw holes, and stainless-steel anti-slip screws, allows you to fix the lens to the tripod directly.
- aviation aluminum material, machining, lightweight hollow design, polished and anodized finish on the surface, exquisite workmanship and for long service life.
- Bottom is 39mm Arca-Swiss standard dovetail quick release plate, for / ARCA-SWISS tripod for head clamp of Arca 39mm fit, suitable for IS-JZ30, IS-JZ50, IS-JZ64, IS-QJ58 and more.
- Inner wall of the tripod is irregular in structure, and the switch hole is reserved, which does not affect the use of the switch on the lens, the tripod cannot be rotated, and only supports horizontal
- See more on Amazon...
Brand: Mllepjdh | Manufacturer: Mllepjdh
See On Amazon #17
Metal Tripod Mount IS-RF140 Lens Collar Support Holder ARCA Type for RF 100-400mm F/5.6-8 is Lens IS-RF140 Lens Collar Support Holder Bracket
Asin: B0D2HXDC8N | Ean: 7629052208979
The Dovetail Slot At The Bottom Of The Lens Mount Is 39Mm Arca-Swiss Standard, For Ishoot Arca-Swiss / Tripod For Head For Arca 39Mm, Suitable For Ishoot Is-Jz50/ Is-Jz64/Is-Qj58/Is-Jz60bk/Is-Jz70mft/Is-Jz80bk.
Aviation Aluminum, Machining, Hollow Weight Reduction Design, Polishing And Surface Anodizing Treatment, Beautiful Appearance And Fine Workmanship..
The Inner Wall Of The Tripod With Irregular Irregular Structure Has Reserved Switch Holes, Which Does Not Affect The Use Of The Switch On The Lens, It Cannot Be Rotated, And Only Supports Horizontal Not Vertical.
Lens Collar Support Is Custom-Made According To The And Structure Of The Lens And Is Only For Rf 100-400Mm F/5.6-8 Is Lens..
Features
- A 50mm long Arca standard quick release plate is added to the bottom of the tripod which can be directly with a 39mm Arca-swiss tripod ball for head, panoramic gimbal, clip, 1/4" and 3/8" screw holes and stainless steel anti-slip screws are also reserved. , you can attach the lens directly to the tripod.
- Lens collar support is custom-made according to the and structure of the lens and is only for RF 100-400mm f/5.6-8 IS lens.
- The dovetail slot at the bottom of the lens mount is 39mm Arca-Swiss standard, for ISHOOT ARCA-SWISS / tripod for head for Arca 39mm, suitable for iShoot IS-JZ50/ IS-JZ64/IS-QJ58/IS-JZ60BK/IS-JZ70MFT/IS-JZ80BK
- The inner wall of the tripod with irregular irregular structure has reserved switch holes, which does not affect the use of the switch on the lens, it cannot be rotated, and only supports horizontal not vertical
- aviation aluminum, machining, hollow weight reduction design, polishing and surface anodizing treatment, beautiful appearance and fine workmanship.
- See more on Amazon...
Brand: GRABLOOM | Manufacturer: GRABLOOM
See On Amazon #18
Metal Tripod Mount Base IS-RF140 Lens Collar Support Port for RF 100-400mm F/5.6-8 is Lens Metal Adapter Built-in ARCA Type Camera Quick Release Plate for Tripod Head
Asin: B0D2HW3JTN | Ean: 7629052209846
Plate Length Is About 50Mm, Built-In Arca Standard Quick Release Plate For Tripod For Head, Equipped With 1/4" And 3/8" Screw Holes, And Stainless-Steel Anti-Slip Screws, Allows You To Fix The Lens To The Tripod Directly..
Aviation Aluminum Material, Machining, Lightweight Hollow Design, Polished And Anodized Finish On The Surface, Exquisite Workmanship And For Long Service Life..
Inner Wall Of The Tripod Is Irregular In Structure, And The Switch Hole Is Reserved, Which Does Not Affect The Use Of The Switch On The Lens, The Tripod Cannot Be Rotated, And Only Supports Horizontal.
Lens Collar Support Is Specially Designed For Rf 100-400Mm F/5.6-8 Is Lens..
Features
- Bottom is 39mm Arca-Swiss standard dovetail quick release plate, for / ARCA-SWISS tripod for head clamp of Arca 39mm fit, suitable for IS-JZ30, IS-JZ50, IS-JZ64, IS-QJ58 and more.
- Lens collar support is specially designed for RF 100-400mm f/5.6-8 IS lens.
- Plate length is about 50mm, built-in Arca standard quick release plate for tripod for head, equipped with 1/4 and 3/8 screw holes, and stainless-steel anti-slip screws, allows you to fix the lens to the tripod directly.
- Inner wall of the tripod is irregular in structure, and the switch hole is reserved, which does not affect the use of the switch on the lens, the tripod cannot be rotated, and only supports horizontal
- aviation aluminum material, machining, lightweight hollow design, polished and anodized finish on the surface, exquisite workmanship and for long service life.
- See more on Amazon...
Brand: GRABLOOM | Manufacturer: GRABLOOM
See On Amazon #19
IS-RF140 Lens Collar Support Bracket for RF 100-400mm F/5.6-8 is Lens Built-in 39mm QR Plate Dovetail IS-RF140 Lens Collar Support Holder Bracket
Asin: B0D2HTZ34H | Ean: 7619440211254
A 50Mm Long Arca Standard Quick Release Plate Is Added To The Bottom Of The Tripod Which Can Be Directly With A 39Mm Arca-Swiss Tripod Ball For Head, Panoramic Gimbal, Clip, 1/4" And 3/8" Screw Holes And Stainless Steel Anti-Slip Screws Are Also Reserved. , You Can Attach The Lens Directly To The Tripod..
The Dovetail Slot At The Bottom Of The Lens Mount Is 39Mm Arca-Swiss Standard, For Ishoot Arca-Swiss / Tripod For Head For Arca 39Mm, Suitable For Ishoot Is-Jz50/ Is-Jz64/Is-Qj58/Is-Jz60bk/Is-Jz70mft/Is-Jz80bk.
Lens Collar Support Is Custom-Made According To The And Structure Of The Lens And Is Only For Rf 100-400Mm F/5.6-8 Is Lens..
Aviation Aluminum, Machining, Hollow Weight Reduction Design, Polishing And Surface Anodizing Treatment, Beautiful Appearance And Fine Workmanship..
Features
- The inner wall of the tripod with irregular irregular structure has reserved switch holes, which does not affect the use of the switch on the lens, it cannot be rotated, and only supports horizontal not vertical
- aviation aluminum, machining, hollow weight reduction design, polishing and surface anodizing treatment, beautiful appearance and fine workmanship.
- A 50mm long Arca standard quick release plate is added to the bottom of the tripod which can be directly with a 39mm Arca-swiss tripod ball for head, panoramic gimbal, clip, 1/4 and 3/8 screw holes and stainless steel anti-slip screws are also reserved. , you can attach the lens directly to the tripod.
- Lens collar support is custom-made according to the and structure of the lens and is only for RF 100-400mm f/5.6-8 IS lens.
- The dovetail slot at the bottom of the lens mount is 39mm Arca-Swiss standard, for ISHOOT ARCA-SWISS / tripod for head for Arca 39mm, suitable for iShoot IS-JZ50/ IS-JZ64/IS-QJ58/IS-JZ60BK/IS-JZ70MFT/IS-JZ80BK
- See more on Amazon...
Brand: Tzxncbzxc | Manufacturer: Tzxncbzxc
See On Amazon
Looking For Something Else?
Search