PROCRAFT Large Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 10 XLR Female 2 XLR Male
Asin: B0D324F8D5
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 10-1/4" Wide X 8" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 8-3/4" Width X 6-1/2" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change.
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 10-1/4 WIDE x 8 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 8-3/4 WIDTH x 6-1/2 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
See On Amazon Similar To PROCRAFT Large Gap LID FeedThru
#1
PROCRAFT Large Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 9 XLR Female 1 XLR Male
Asin: B0D2YBTBPB
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 10-1/4" Wide X 8" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 8-3/4" Width X 6-1/2" Front To Back.
* Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change.
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- . PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 10-1/4 WIDE x 8 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 8-3/4 WIDTH x 6-1/2 FRONT TO BACK
- * DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #2
PROCRAFT Large Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 2 Wired AC 4 XLR Female 1 XLR Male 1 RJ45
Asin: B0D3QVHGXM
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket.
Overall Box Dimensions Facing The Opening: 10-1/4" Wide X 8" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 8-3/4" Width X 6-1/2" Front To Back.
* Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change.
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 10-1/4 WIDE x 8 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 8-3/4 WIDTH x 6-1/2 FRONT TO BACK
- * DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #3
PROCRAFT Large Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 2 Wired AC 4 XLR Female 2 XLR Male
Asin: B0D3JD6ML1
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 10-1/4" Wide X 8" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 8-3/4" Width X 6-1/2" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change.
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 10-1/4 WIDE x 8 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 8-3/4 WIDTH x 6-1/2 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #4
PROCRAFT Large Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 2 Wired AC 5 XLR Female 1 XLR Male
Asin: B0D3J68DZ7
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 10-1/4" Wide X 8" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 8-3/4" Width X 6-1/2" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge.
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge
- OVERALL BOX DIMENSIONS FACING THE OPENING: 10-1/4 WIDE x 8 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 8-3/4 WIDTH x 6-1/2 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #5
PROCRAFT Large Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 2 Wired AC 6 XLR Female
Asin: B0D3J266GF
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket.
Overall Box Dimensions Facing The Opening: 10-1/4" Wide X 8" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 8-3/4" Width X 6-1/2" Front To Back.
* Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge.
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change.
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge
- OVERALL BOX DIMENSIONS FACING THE OPENING: 10-1/4 WIDE x 8 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 8-3/4 WIDTH x 6-1/2 FRONT TO BACK
- * DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #6
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 2 Wired AC
Asin: B0D3FJZ632
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket.
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #7
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1) Wired AC 1) XLR Male
Asin: B0D38717NF
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket.
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
* Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- * DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #8
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 1 HDMI
Asin: B0D385TD2M
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket.
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
* Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
. Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge.
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- . PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- * DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #9
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 1 XLR Female 1 XLR Male
Asin: B0D384XR3P
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
. Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- . PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #10
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 2 XLR Female 1 XLR Male
Asin: B0D383J32C
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket.
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #11
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 1 XLR Male 1 RJ45
Asin: B0D382DNS7
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket.
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
. Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- . PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #12
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 1 XLR Female 1 XLR Male 1 RJ45
Asin: B0D366881Y
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket.
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
. Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- . PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #13
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 1 XLR Female 1 XLR Male 2 RJ45
Asin: B0D3659ZGR
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #14
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Boxw/ 1 Wired AC 2 XLR Female 1 XLR Male 1 RJ45
Asin: B0D364PJZR
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #15
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Boxw/ 1 Wired AC 3 XLR Female 1 XLR Male
Asin: B0D363VMXT
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change.
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #16
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 1 XLR Female 1 XLR Male 1 RJ45 1 HDMI
Asin: B0D361YH1P
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
* Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- * DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #17
PROCRAFT Mini Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC
Asin: B0D32632W6
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket.
Overall Box Dimensions Facing The Opening: 7-1/8" Side To Side X 7-15/16" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 5-5/8" Side To Side X 6-5/8" Front To Back.
Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change.
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 7-1/8 SIDE TO SIDE x 7-15/16 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 5-5/8 SIDE TO SIDE x 6-5/8 FRONT TO BACK
- DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #18
PROCRAFT Large Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 9 XLR Female 1 XLR Male 2 RJ45
Asin: B0D325KJ64
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 10-1/4" Wide X 8" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 8-3/4" Width X 6-1/2" Front To Back.
* Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge.
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change.
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change
- PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge
- OVERALL BOX DIMENSIONS FACING THE OPENING: 10-1/4 WIDE x 8 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 8-3/4 WIDTH x 6-1/2 FRONT TO BACK
- * DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon #19
PROCRAFT Large Gap LID Feed-Thru RECESSED Stage Pocket/Floor Box w/ 1 Wired AC 11 XLR Female 1 XLR Male
Asin: B0D323HV8K
We Now Include Countersunk External Mounting Holes To Help Provide A Smooth Surface After The Unit Is Fastened To Your Floor Covering. Mounting Screws Are Included With Each Pocket..
Overall Box Dimensions Facing The Opening: 10-1/4" Wide X 8" Front To Back X 5-5/8" Deep * (See Below) Floor Cut Out To Install Facing The Opening: 8-3/4" Width X 6-1/2" Front To Back.
* Disclaimer: These Feed-Thru Style Pockets Require 9" Of Clearance Beneath The Floor Once The Connecting Cables Are Plugged In. Please Double-Check Your Available Space Below The Surface Of The Platform Before Ordering!.
. Procraft D-Style Connector Options For This Box Are As Follows: Xfft - Xlrf To Xlrm Feed-Thru Xmft - Xlrm To Xlrf Feed-Thru Lqft - 1/4" Trs / Ts Locking To 1/4" Trs / Ts Locking Feed-Thru Hdft - Hdmi To Hdmi Feed-Thru Rjft - Rj45 To Rj45 Feed-Thru Bnft - Bnc To Bnc Feed-Thru Rcft - Rca To Rca Feed-Thru 35Ft - 3.5Mm Trs /Ts To 3.5Mm Trs /Ts Feed Thru Usft - Usb 2.0 To Usb 2.0 Feed-Thru.
Please Note That Color And Style May Vary On All Connector Options Excluding The Xfft, Xmft, And Lqft * Genuine Neutrik Connectors Are Available For An Up-Charge..
Please Note: We Can Load This Box According To Your Needs * Disclaimer: Item Will Be Loaded As Pictured Unless You Request A Configuration Change..
This Enclosure Is Proudly Made By Hand In Jackson,Missouri - Usa.
This Box Design Features A Gap Lid Opening For Cable Entry. Cable Entry Dimensions Are 3/4 Wide Across The Entire Front Of The Box.* The 3-Hole Lid Version Is Also Available.
Features
- PROCRAFT now offers a series of USA-made floor pockets loaded with a UL-LISTED Pre-Wired Edison Duplex Outlet (rated at 120V / 12A) with 6ft tail + Dual 5VDC / 2.1A USB Charging Ports. This box also includes Feed-Thru Audio-Video connectors, for a super quick installation option in any venue.
- This box design features a gap lid opening for cable entry. Cable entry dimensions are 3/4 wide across the entire front of the box.* The 3-hole LID version is also available
- We now include countersunk external mounting holes to help provide a smooth surface after the unit is fastened to your floor covering. Mounting screws are included with each pocket.
- PLEASE NOTE: We can load this box according to your needs * DISCLAIMER: Item will be loaded as pictured unless you request a configuration change.
- . PROCRAFT D-STYLE CONNECTOR OPTIONS FOR THIS BOX ARE AS FOLLOWS: XFFT - XLRF TO XLRM FEED-THRU XMFT - XLRM TO XLRF FEED-THRU LQFT - 1/4 TRS / TS LOCKING TO 1/4 TRS / TS LOCKING FEED-THRU HDFT - HDMI TO HDMI FEED-THRU RJFT - RJ45 TO RJ45 FEED-THRU BNFT - BNC TO BNC FEED-THRU RCFT - RCA TO RCA FEED-THRU 35FT - 3.5MM TRS /TS TO 3.5MM TRS /TS FEED THRU USFT - USB 2.0 TO USB 2.0 FEED-THRU
- Please note that color and style may vary on all connector options excluding the XFFT, XMFT, and LQFT * Genuine NEUTRIK Connectors are available for an up-charge.
- OVERALL BOX DIMENSIONS FACING THE OPENING: 10-1/4 WIDE x 8 FRONT TO BACK x 5-5/8 DEEP * (see below) FLOOR CUT OUT TO INSTALL FACING THE OPENING: 8-3/4 WIDTH x 6-1/2 FRONT TO BACK
- * DISCLAIMER: These feed-thru style pockets require 9 of clearance beneath the floor once the connecting cables are plugged in. Please double-check your available space below the surface of the platform before ordering!
- THIS ENCLOSURE IS PROUDLY MADE BY HAND IN JACKSON,MISSOURI - USA
- See more on Amazon...
Brand: ProSpeakerparts | Manufacturer: Pro Speaker parts
See On Amazon
Looking For Something Else?
Search