Frontpage > Toys and Hobby > Remote Controlled Vehicles > Engine Mounts

Best Engine Mounts - Buying Guide

Last Updated: 06/20/2019

Share on

Bestselling Engine Mounts on Amazon

  1. Redcat Racing 02049 Engine Mounts with Cap Screws
  2. Mxfans Silver Upgrade Accessory AX80026 Center Skid Plate AXIAL SCX10 Electric 4WD RC1:10 Model Car
  3. Integy RC Model Hop-ups T8653SILVER Billet Machined Wheelie Bar for Traxxas 1/10 Stampede 4X4
  4. Integy RC Model Hop-ups T7995SILVER Front Bumper II for 1/10 Electric Stampede 2WD, Rustler 2WD & Bandit
  5. Integy RC Model Hop-ups T6982GREEN Body Mount for Savage XL, Flux & X 4.6 RTR
  6. Redcat Racing VX.18 Nitro Engine
  7. BQLZR Silver 50mm Length ID 3mm OD 4mm Tube Transom Mounting Water Pickup For RC Boat
  8. Integy RC Model Hop-ups C25864BLUE Custom Machined Alloy+Carbon Fiber Quadcopter Upgrade Frame 550 S...
  9. ALIENTAC Quick Release Engine Mount ZENOAH QD RCMK K30S For RC Model Boat Gas
  10. Hobao 1/8 Hyper 7 TQ Ofna ENGINE MOUNT PLATE, SCREWS, NUTS JL .28 Mac Force

  #1

Redcat Racing 02049 Engine Mounts with Cap Screws

Model: 02049   |    Mpn: 2049   |    Ean: 0609132454226   |    PartNumber: 2049   |   Asin: B009JMUNOI

Redcat Racing Part # 02049 Engine Mounts with cap screw. Compatible with the following Redcat Racing vehicles: lightning STR, SHOCKWAVE, Tornado S30, VOLCANO S30, vortex SS. Redcat Racing is located in the United States and has a full staff of support personnel to help you with your Redcat Racing product. Consult your vehicle manual for correct fitment and assembly. Since 2005 Redcat has been your source for fast - affordable - fun!

Features

  • Genuine Redcat Racing Replacement part # 02049
  • Use only genuine Redcat Racing Replacement parts to achieve the best performance with your Redcat Racing vehicles.
  • Please consult your user's manual to ensure this is the correct part for your model.
  • For troubleshooting and Warranty information please contact a Redcat Racing customer service specialist at 602-454-6445 or by emailing amazonsupport@redcatracing.Com
  • Compatible with the following Redcat Racing vehicles: Lightning str, Shockwave, tornado S30, volcano S30, Vortex SS
  • See more on Amazon...

Brand: Redcat Racing   |   Manufacturer: Redcat Racing

Item Dimensions: 0.75 x 0.25 x 1.25 inches (1.9 x 0.6 x 3.2 cm)   |   Package Dimensions: 0.6 x 2.8 x 3 inches (1.5 x 7.1 x 7.6 cm)

First Available: 2018-12-12

Amazon Price: $5.44 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price: $4.49

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Mxfans Silver Upgrade Accessory AX80026 Center Skid Plate AXIAL SCX10 Electric 4WD RC1:10 Model Car

Model: M3170911091   |    Mpn: M3170911091   |    PartNumber: M3170911091   |   Asin: B075RZ28YP

Specifications:
Material:Aluminum alloy
Color:Silver
Brand name:Mxfans
Size:7.8x7.3x1.3cm/3.07x2.87x0.51inch(LxWxH)
Weight:52g

Features:
Fit for AXIAL SCX10 RC1:10 Electric 4WD Model Car
Made of high quality aluminum alloy
Designed for lasting performance and Long durablity
To enhance the overall performance of the RC Car

Package Content:
1 x RC Center Skid Plate

Each qualify checked item with a unique Manufacturing Part Number label on the inner package to confirm if it is the authentic item sold from our store.When you have any problems about your item ,please send us the MPN label information first

Features

  • Fit for AXIAL SCX10 RC1:10 Electric 4WD Model Car
  • Made of high quality aluminum alloy
  • Designed for lasting performance and Long durablity
  • To enhance the overall performance of the RC Car
  • See more on Amazon...

Brand: Mxfans   |   Manufacturer: blhlltd

Package Dimensions: 0.63 x 3.23 x 4.09 inches (1.6 x 8.2 x 10.4 cm)

Amazon Price: $10.78 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Integy RC Model Hop-ups T8653SILVER Billet Machined Wheelie Bar for Traxxas 1/10 Stampede 4X4

Model: T8653SILVER   |    Mpn: T8653SILVER   |    Ean: 0917890160762   |    PartNumber: T8653SILVER   |   Asin: B00BZ1IW3A

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T8653SILVER Barcode: 91789016076

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Item Dimensions: 6 x 7 x 3 inches (15.2 x 17.8 x 7.6 cm)   |   Package Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)

Amazon Price: $28.94 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Integy RC Model Hop-ups T7995SILVER Front Bumper II for 1/10 Electric Stampede 2WD, Rustler 2WD & Bandit

Model: T7995SILVER   |    Mpn: T7995SILVER   |    Ean: 0917890061625   |    PartNumber: T7995SILVER   |   Asin: B00XSDWL0S

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T7995SILVER Barcode: 91789006162

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Amazon Price: $17.99 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 2-3 business days
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Integy RC Model Hop-ups T6982GREEN Body Mount for Savage XL, Flux & X 4.6 RTR

Model: T6982GREEN   |    Mpn: T6982GREEN   |    PartNumber: T6982GREEN   |   Asin: B00XQQ536G

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T6982GREEN Barcode: 91789014186

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Amazon Price: $23.99 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 2-3 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Redcat Racing VX.18 Nitro Engine

Model: VX-18   |    Mpn: VX-18   |    Ean: 0716080216728   |    PartNumber: VX-18   |   Asin: B00E5L1GRG

Use the Parts Search at www.redcatracing.com to make sure you are purchasing the right part for your vehicle. This item is compatible with the following Redcat Racing models: LIGHTNING STR,SHOCKWAVE,TORNADO BB,TSUNAMI (nitro),VOLCANO STX,VOLCANO SV.

Features

  • VX.18 Nitro Engine
  • Genuine Redcat Racing Parts
  • Redcat Racing Part Number VX-18
  • For troubleshooting and warranty information please contact a Redcat Racing Customer Service Specialist at 602-454-6445 or by emailing amazonsupport@redcatracing.com
  • NOTE: Please read the User Manual before use.
  • See more on Amazon...

Brand: Redcat Racing   |   Manufacturer: Redcat Racing

Item Dimensions: 3 x 4 x 4 inches (7.6 x 10.2 x 10.2 cm)   |   Package Dimensions: 3.1 x 5.1 x 5.2 inches (7.9 x 13.0 x 13.2 cm)

Amazon Price: $103.99 | as of 06/20/2019(2:23am pst)
Availibility:
List Price:

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

BQLZR Silver 50mm Length ID 3mm OD 4mm Tube Transom Mounting Water Pickup For RC Boat

Model: N05063   |    Mpn: T7L2   |    Ean: 0600346934221   |    PartNumber: T7L2   |   Asin: B019F782JE

Note: The color of the item may vary slightly due to photography and your own computer

Application: Commonly Used In Methanol /Gasoline/ Electric RC Boat(Ship With The Water-Cooling System), Installed in the Aft Position
Feature:
Material: Metal
Dimension:
Length: 50mm
Inlet Diameter: 3mm
Outer Diameter: 4mm
Total Size : 50 x 28 x 14mm/1.97" x 1.10" x 0.55"(L*H* Max.D.)
Color: Silver and Bronze
Weight:7g

Package Include:
1 X RC Boat Water Pickup

Features

  • Commonly Used in the Methanol Boat Gasoline Boat and Electric Boat
  • Durable RC Boat Gadget Mounted On The Stern Position
  • See more on Amazon...

Brand: BQLZR   |   Manufacturer: BQLZR

Amazon Price: $5.73 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Integy RC Model Hop-ups C25864BLUE Custom Machined Alloy+Carbon Fiber Quadcopter Upgrade Frame 550 Size Foldable

 Ean: 4801673783643   |    PartNumber: C25864BLUE   |   Asin: B00W42UV2E

OVERVIEW: Take to the sky with our new Carbon Fiber & Alloy Quadcopter Upgrade Frame Set. Designed for custom quad projects, this 550-size lightweight frame features carbon fiber arms with alloy mounts that can be easily folded for storage, carbon fiber upper and lower plates, and an adjustable-stance landing gear. You also get a set of four 11 x 4. 7-pitch rotor blades, as well as an aluminum carry case. The frames are available in carbon fiber with alloy parts in blue, green, grey, orange, purple, red, or silver anodizing. The weight of the frame as shown is 1. 15-lbs. (521. 6g). NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item C25864BLUE Barcode: 91789021168

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Amazon Price: $98.90 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 2-3 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

ALIENTAC Quick Release Engine Mount ZENOAH QD RCMK K30S For RC Model Boat Gas

 Ean: 0701807492950   |    PartNumber: SA-03-013   |   Asin: B01BQIGH7Y

Features

  • Strong metal alloy for maximum performance. Add strength, toughness and power to your RC Boat
  • For ZENOAH QD RCMK K30S Motor
  • See more on Amazon...

Brand: ALIENTAC   |   Manufacturer: ALIENTAC

Package Dimensions: 1 x 6 x 8 inches (2.5 x 15.2 x 20.3 cm)

Amazon Price: $45.00 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 1-2 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Hobao 1/8 Hyper 7 TQ Ofna ENGINE MOUNT PLATE, SCREWS, NUTS JL .28 Mac Force

 Ean: 0030656516648   |    PartNumber: DHZHyper7EngineMount   |   Asin: B01N6U09W1

HoBao 1/8 Nitro Hyper 7 TQ Buggy (Model HB-M7TQ-C28)
Engine Mount

MSRP: $22.99

This Product Includes:

Adjustable Aluminum Engine Mount (Part # 87079)
Four (4) M3x14 Cap Head Screws (Part # 32314 Partial)
Four (4) M4x8 Button Head Screws (Part # 39408 Partial) ;
Four (4) M3 Nylon Lock Nuts (Part # 39008 Partial)
Four (4) Spring Washers (Part # ;3SW3NI Partial)
Two ;(2) Engine Mount Spacers (Part # 87079-1)
Engine Mount Plate and Mounting Screws ;(Part # 87077B)

This product is NEW in OEM Packaging and is from a New, Unused HoBao 1/8 Nitro Hyper 7 TQ Buggy (Model HB-M7TQ-C28)

Part Numbers are for Reference Only. The parts included with this product are exclusive to what is pictured in this listing.

This product is compatible with the following Model: HoBao 1/8 Nitro Hyper 7 TQ Buggy (Model HB-M7TQ-C28)

Features

  • Engine Mount for the HoBao 1/8 Nitro Hyper 7 TQ Buggy (Model HB-M7TQ-C28)
  • This product is NEW in OEM Packaging and is from a New, Unused HoBao 1/8 Nitro Hyper 7 TQ Buggy (Model HB-M7TQ-C28)
  • Due to disassembled nature of this product, some parts may show slight signs of disassembly.
  • The parts included with this product are exclusive to what is pictured. See product description for exact contents.
  • Part Number(s) associated with this product (see product description for inclusion details HB-M7TQ-C28 14326 87079 32314 39008 3SW3NI 87079-1 87077B 3940814326 19079 29102 94076 94041 19480 19177
  • See more on Amazon...

Brand: Hobao   |   Manufacturer: HoBao

Amazon Price: $29.51 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

GPM Axial Yeti (AX90026) & Yeti SCORE (AX90050, AX90068) Upgrade Parts Aluminum Rear Axle Mount - 1Pc Set Orange

 PartNumber: GPMYT013A-OR   |   Asin: B00T05K9MU

Axial Yeti (AX90026) & Yeti SCORE (AX90050, AX90068) Upgrade Parts Aluminum Rear Axle Mount - 1Pc Set Orange

Features

  • Product Name : Aluminum Rear Axle Mount - 1Pc Set
  • Item No. : YT013A-OR
  • Color : Orange
  • Will fit : Axial 1/10 Yeti Rock Racer (AX90026), 1/10 Yeti SCORE Trophy Truck (AX90050, AX90068)
  • Order will be processed and shipped in 1-3 business days, usually takes 7-20 business days to arrive worldwide.
  • See more on Amazon...

Brand: GPM   |   Manufacturer: GPM

Amazon Price: $13.80 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 4-5 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Integy RC Model Hop-ups T8091SILVER V2 Alloy Chassis Conversion Set for Traxxas 1/10 Electric Slash 2WD

Model: T8091SILVER   |    Mpn: T8091SILVER   |    PartNumber: T8091SILVER   |   Asin: B001V7W0RM

OVERVIEW: Transform the performance and looks of your stock 1/10-scale Traxxas Slash 2WD truck with our new Billet Machined Alloy Chassis Conversion Set. This chassis conversion features an alloy main frame, carbon fiber front mount, and a spring loaded battery holder with quick-release strap. The conversion set is available in silver, green, orange, grey, or red anodized finishing. (Fits 6-cell NiMH stick pack / standard 2S / slim 3S Lipo packs only. This conversion set can be adapted to fit the 1/10 Slash 2WD LCG version.) NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T8091SILVER Barcode: 91789006435

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Amazon Price: $99.99 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 2-3 business days
List Price: $99.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

ALIENTAC CNC Quick Release Engine Mount For ZENOAH QD RCMK K30S, RC Model Boat Gas

 Ean: 0701807494725   |    PartNumber: SA-03-046   |   Asin: B01BQIYDTS

Features

  • Strong metal alloy for maximum performance. Add strength, toughness and power to your RC Boat
  • For ZENOAH QD RCMK K30S Engine
  • See more on Amazon...

Brand: ALIENTAC   |   Manufacturer: ALIENTAC

Package Dimensions: 1 x 5.5 x 9 inches (2.5 x 14.0 x 22.9 cm)

Amazon Price: $38.00 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Integy RC Model Hop-ups T6825GREY Pullstart Handle for HPI Baja 5B

Model: T6825GREY   |    Mpn: T6825GREY   |    PartNumber: T6825GREY   |   Asin: B00W3ZGIYW

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T6825GREY Barcode: 91789021486

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Amazon Price: $22.24 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 2-3 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Integy RC Model Hop-ups C25589GUN T7 Realistic High Torque Mega Winch w/Remote for Scale Rock Crawler 1/10 Size

Model: C25589GUN   |    Mpn: C25589GUN   |    Ean: 0917890203230   |    PartNumber: C25589GUN   |   Asin: B00XSDZW72

(Maximum load rating @7. 4VDC = 9-lbs. direct power/8-lbs. w/remote control) NOTE: RC winches are designed to pull, not lift - meaning pulling a vehicle that is rolling freely, as opposed to lifting a vehicle up off the ground. When you pull, a majority of the vehicle weight is being supported by the tires on the ground, and the rolling tires also take load away from the winch. However, when you try to lift a vehicle, the winch is trying to support the entire weight of the vehicle. DO NOT use your winch to lift the vehicle off the ground! This will most likely burn out the winch motor, and is not covered under warranty. Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item C25589GUN Barcode: 91789020323

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Amazon Price: $69.99 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 2-3 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Team C Racing T08686 Engine Mount T8E

Model: HTCT08686   |    Mpn: T08686   |    Ean: 0787793899010   |    PartNumber: T08686   |   Asin: B00HWQDKG6

Team C is one of the leading EP Off Road car manufacturers. With a design and development team guided by feedback from racers from around the world, Team C is constantly pushing the envelope for design and performance. Team C also owns their own manufacturing facility, allowing them to ensure that all of their products meet their stringent guidelines right off the production line. When you want a high performance product without the high performance price, think Team C!

Features

  • Made using the highest quality components
  • Performance and quality tested
  • Used by professional drivers worldwide
  • Manufactured from high quality materials and designed for long lasting performance
  • Use Team C replacement parts and aftermarket accessories to get the winning edge!
  • Direct OEM parts for a guaranteed fit and finish
  • See more on Amazon...

Brand: Team C Racing   |   Manufacturer: HRP (Level 3 Products)

Item Dimensions: 5 x 0.5 x 2.75 inches (12.7 x 1.3 x 7.0 cm)   |   Package Dimensions: 0.2 x 3.1 x 3.3 inches (0.5 x 7.9 x 8.4 cm)

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Integy RC Model Hop-ups T8671BLUE Machined Rear Body Mount Set for 1/10 Traxxas Slash 2WD

 Ean: 0917890167532   |    PartNumber: T8671BLUE   |   Asin: B00GBJPUSQ

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only.

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Item Dimensions: 0.5 x 5.5 x 6.5 inches (1.3 x 14.0 x 16.5 cm)   |   Package Dimensions: 1.1 x 5.4 x 6.5 inches (2.8 x 13.7 x 16.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Kyosho Inferno GT2 Nitro KE25 ENGINE/CRANKCASE MOUNTS, PLATES, SCREWS mount

 Ean: 0766150464023   |    PartNumber: DHZGT2EngineMount   |   Asin: B00F1M8ZK4

Kyosho 1/8 Inferno GT2 Race Spec (Model KYO31834B)
Engine Mount Set

MSRP: $19.99

This Product Includes:

Engine Mount Set
Two (2) Engine Mounts (Part # IF108B)
Two (2) Engine Mount Plates (Part # IF210)
Assembly Screws as Shown

This product is NEW in OEM Packaging and is from a New, Unused Kyosho 1/8 Inferno GT2 Race Spec (Model KYO31834B)

Part Numbers are for Reference Only. The parts included with this product are exclusive to what is pictured in this listing.

This product is compatible with the following Model: Kyosho 1/8 Inferno GT2 Race Spec (Model KYO31834B)

Features

  • Engine Mount Set for the Kyosho 1/8 Inferno GT2 Race Spec (Model KYO31834B)
  • This product is NEW in OEM Packaging and is from a New, Unused Kyosho 1/8 Inferno GT2 Race Spec (Model KYO31834B)
  • Due to disassembled nature of this product, some parts may show slight signs of disassembly.
  • The parts included with this product are exclusive to what is pictured. See product description for exact contents.
  • Part Number(s) associated with this product (see product description for inclusion details KYO31834B IF108B IF210
  • See more on Amazon...

Brand: Kyosho   |   Manufacturer: Kyosho

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

GPM Alloy Rear Engine Mount for 1:5 HPI Baja 5B + Other HPI Models - Purple

Model: GPM107PU   |    Mpn: 107PU   |    Ean: 0845623083845   |    PartNumber: 107PU   |   Asin: B00HD26QRE

Features

  • High Quality Upgrade Part
  • Easy upgrade from the original part
  • Made From Hardened Billet 6061 Aluminum; Precision CNC Machined
  • See more on Amazon...

Brand: GPM Racing   |   Manufacturer: Venom Group International

Item Dimensions: 1 x 1 x 4 inches (2.5 x 2.5 x 10.2 cm)   |   Package Dimensions: 0.6 x 5.4 x 6 inches (1.5 x 13.7 x 15.2 cm)

Warranty: 90 day warranty against manufacturer defects

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Integy RC Model Hop-ups T6977PURPLE HD Engine Mount for HPI Savage XL & X 4.6 RTR

Model: T6977PURPLE   |    Mpn: T6977PURPLE   |    PartNumber: T6977PURPLE   |   Asin: B00XQPZYSE

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T6977PURPLE Barcode: 91789006190

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Redcat Racing Aluminum Adjustable Engine Mount

Model: 85723   |    Mpn: 85723   |    Ean: 0699328163247   |    PartNumber: 85723   |   Asin: B002YV5X9G

Use the Parts to make sure you are purchasing the right part for your vehicle. This item is compatible with the following Redcat Racing models: AFTERSHOCK 21,AVALANCHE XTR,HURRICANE XTR,LANDSLIDE 21,MONSOON XTR,SANDSTORM 21.

Features

  • Aluminum Adjustable Engine Mount
  • Genuine Redcat Racing Parts
  • Redcat Racing Part Number 85723
  • For troubleshooting and warranty information please contact a Redcat Racing Customer Service Specialist at 602-454-6445 or by emailing amazonsupport@redcatracing.com
  • NOTE: Please read the User Manual before use.
  • See more on Amazon...

Brand: Redcat Racing   |   Manufacturer: Redcat Racing

Item Dimensions: 0.5 x 0.5 x 1.75 inches (1.3 x 1.3 x 4.4 cm)   |   Package Dimensions: 1.9 x 4 x 6.2 inches (4.8 x 10.2 x 15.7 cm)

Amazon Price: $12.95 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 1-2 business days
List Price: $13.99

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

DLE Engines 30-C18 DLE30 Engine Mount Standoffs

Model: DLEG3118   |    Mpn: DLEG3118   |    Ean: 0785239981527   |    PartNumber: DLEG3118   |   Asin: B00CL10KEC

This is the Engine Mount Set for the DLE DL-30cc Gasoline Engine, DLEG0031. FEATURES: Aluminium and steel construction.

Features

  • FEATURES: Aluminium and steel construction
  • INCLUDES: Four Engine Mount Standoffs Four Large Washers Four Small Washers Eight 5x18mm Cap Head Bolts
  • See more on Amazon...

Brand: Dle Engines   |   Manufacturer: Hobbico Inc

Item Dimensions: 0.88 x 2.75 x 4.25 inches (2.2 x 7.0 x 10.8 cm)   |   Package Dimensions: 0.2 x 4.2 x 4.2 inches (0.5 x 10.7 x 10.7 cm)

Amazon Price: $19.99 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price: $22.99

Warranty: See mfg website

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

GPM Alloy Rear Engine Mount for 1:5 HPI Baja 5B + Other HPI Models - Grey

Model: GPM107GM   |    Mpn: 107GM   |    Ean: 0845623083838   |    PartNumber: 107GM   |   Asin: B00HD26MT6

Features

  • High Quality Upgrade Part
  • Easy upgrade from the original part
  • Made From Hardened Billet 6061 Aluminum; Precision CNC Machined
  • See more on Amazon...

Brand: GPM Racing   |   Manufacturer: Venom Group International

Item Dimensions: 1 x 1 x 4 inches (2.5 x 2.5 x 10.2 cm)   |   Package Dimensions: 0.7 x 5.2 x 6 inches (1.8 x 13.2 x 15.2 cm)

Warranty: 90 day warranty against manufacturer defects

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Integy RC Model Hop-ups T7917SILVER Silver Air Filter for Jato

 Ean: 0917890039587   |    PartNumber: T7917SILVER   |   Asin: B00XSDXXUU

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item T7917SILVER Barcode: 91789003958

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Item Dimensions: 4.5 x 3.25 x 1.13 inches (11.4 x 8.3 x 2.9 cm)   |   Package Dimensions: 1 x 2 x 4 inches (2.5 x 5.1 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Redcat Racing Machined Aluminum Engine Mount for 102205 Vehicle (2 Piece), Purple

Model: 02128   |    Mpn: 2128   |    Ean: 0609132456282   |    PartNumber: 2128   |   Asin: B002VN0B5S

Use the Parts Search at www.redcatracing.com to make sure you are purchasing the right part for your vehicle. This item is compatible with the following Redcat Racing models: LIGHTNING STR,SHOCKWAVE,TORNADO S30,VOLCANO S30,VORTEX SS.

Features

  • Machined aluminum engine mount (2pcs)(purple)(Same as 102205)
  • Genuine Redcat Racing Parts
  • Redcat Racing Part Number 02128
  • For troubleshooting and warranty information please contact a Redcat Racing Customer Service Specialist at 602-454-6445 or by emailing amazonsupport@redcatracing.com
  • NOTE: Please read the User Manual before use.
  • See more on Amazon...

Brand: Redcat Racing   |   Manufacturer: Redcat Racing

Item Dimensions: 0.25 x 1 x 1.25 inches (0.6 x 2.5 x 3.2 cm)   |   Package Dimensions: 0.3 x 4 x 7.12 inches (0.8 x 10.2 x 18.1 cm)

Amazon Price: $8.92 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 1-2 business days
List Price:

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Integy RC Model Hop-ups BAJ125ORANGE Limited Edition Billet Clutch Case for HPI Baja 5B, 5T & 5B2.0 use 24mm Bearings

Model: BAJ125ORANGE   |    Mpn: BAJ125ORANGE   |    Ean: 0917890083764   |    PartNumber: BAJ125ORANGE   |   Asin: B00W412T0M

OVERVIEW: Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined, and the aluminum alloy parts are available with an anodized finish in multiple colors to help match your color scheme. NOTE: Some parts include new hardware where applicable, but some parts are designed to use your original hardware and fasteners. Shimming may be required for perfect alignment and fitment. Some parts may require some permanent modification to the vehicle for fitment. Some parts may eliminate certain OEM features. Instructions for installation are not included; if you do not know how to install the part, please ask your local dealer for assistance. Before installation, please check metal-to-metal fasteners for tightness, and use liquid threadlock when required, as some components are assembled for packaging purposes only. Item BAJ125ORANGE Barcode: 91789008376

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Amazon Price: $37.99 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 2-3 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

VATERRA Aluminum Motor Plate & Clamp: Twin Hammers

Model: VTR232018   |    Mpn: VTR232018   |    Ean: 0605482030837   |    PartNumber: VTR232018   |   Asin: B00B844UEE

Aluminum Motor Plate & Clamp: Twin Hammers

Features

Brand: VATERRA   |   Manufacturer: Horizon Hobby (US)

Item Dimensions: 0.42 x 2.1 x 4 inches (1.1 x 5.3 x 10.2 cm)   |   Package Dimensions: 0.39 x 2.52 x 4.49 inches (1.0 x 6.4 x 11.4 cm)

First Available: 2017-07-19

Amazon Price: $21.99 | as of 06/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price:

Warranty: Free from Mfg. defects upon purchase by original owner

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Redcat Racing 02049 Engine Mounts with Cap Screws
  2. GPM Alloy Rear Engine Mount for 1:5 HPI Baja 5B + Other HPI Models - Purple
  3. Integy RC Model Hop-ups T6977PURPLE HD Engine Mount for HPI Savage XL & X 4.6 RTR
  4. Redcat Racing Aluminum Adjustable Engine Mount
  5. DLE Engines 30-C18 DLE30 Engine Mount Standoffs
  6. GPM Alloy Rear Engine Mount for 1:5 HPI Baja 5B + Other HPI Models - Grey
  7. Integy RC Model Hop-ups T7917SILVER Silver Air Filter for Jato
  8. Redcat Racing Machined Aluminum Engine Mount for 102205 Vehicle (2 Piece), Purple
  9. Integy RC Model Hop-ups BAJ125ORANGE Limited Edition Billet Clutch Case for HPI Baja 5B, 5T & 5B...
  10. VATERRA Aluminum Motor Plate & Clamp: Twin Hammers

Most Wished For

  1. GPM Axial Yeti (AX90026) & Yeti SCORE (AX90050, AX90068) Upgrade Parts Aluminum Rear Axle Mount ...
  2. Integy RC Model Hop-ups T8091SILVER V2 Alloy Chassis Conversion Set for Traxxas 1/10 Electric Slash ...
  3. ALIENTAC CNC Quick Release Engine Mount For ZENOAH QD RCMK K30S, RC Model Boat Gas
  4. Integy RC Model Hop-ups T6825GREY Pullstart Handle for HPI Baja 5B
  5. Integy RC Model Hop-ups C25589GUN T7 Realistic High Torque Mega Winch w/Remote for Scale Rock Crawle...
  6. Team C Racing T08686 Engine Mount T8E
  7. Integy RC Model Hop-ups T8671BLUE Machined Rear Body Mount Set for 1/10 Traxxas Slash 2WD
  8. Mxfans Silver Upgrade Accessory AX80026 Center Skid Plate AXIAL SCX10 Electric 4WD RC1:10 Model Car
  9. Redcat Racing VX.18 Nitro Engine
  10. Kyosho Inferno GT2 Nitro KE25 ENGINE/CRANKCASE MOUNTS, PLATES, SCREWS mount

Most Gifted

  1. Redcat Racing 02049 Engine Mounts with Cap Screws
  2. GPM Alloy Rear Engine Mount for 1:5 HPI Baja 5B + Other HPI Models - Purple
  3. Integy RC Model Hop-ups T6977PURPLE HD Engine Mount for HPI Savage XL & X 4.6 RTR
  4. Redcat Racing Aluminum Adjustable Engine Mount
  5. DLE Engines 30-C18 DLE30 Engine Mount Standoffs
  6. GPM Alloy Rear Engine Mount for 1:5 HPI Baja 5B + Other HPI Models - Grey
  7. Integy RC Model Hop-ups T7917SILVER Silver Air Filter for Jato
  8. Redcat Racing Machined Aluminum Engine Mount for 102205 Vehicle (2 Piece), Purple
  9. Integy RC Model Hop-ups BAJ125ORANGE Limited Edition Billet Clutch Case for HPI Baja 5B, 5T & 5B...
  10. VATERRA Aluminum Motor Plate & Clamp: Twin Hammers

Top Selling

  1. Redcat Racing 02049 Engine Mounts with Cap Screws
  2. Mxfans Silver Upgrade Accessory AX80026 Center Skid Plate AXIAL SCX10 Electric 4WD RC1:10 Model Car
  3. Integy RC Model Hop-ups T8653SILVER Billet Machined Wheelie Bar for Traxxas 1/10 Stampede 4X4
  4. Integy RC Model Hop-ups T7995SILVER Front Bumper II for 1/10 Electric Stampede 2WD, Rustler 2WD &...
  5. Integy RC Model Hop-ups T6982GREEN Body Mount for Savage XL, Flux & X 4.6 RTR
  6. Redcat Racing VX.18 Nitro Engine
  7. BQLZR Silver 50mm Length ID 3mm OD 4mm Tube Transom Mounting Water Pickup For RC Boat
  8. Integy RC Model Hop-ups C25864BLUE Custom Machined Alloy+Carbon Fiber Quadcopter Upgrade Frame 550 S...
  9. ALIENTAC Quick Release Engine Mount ZENOAH QD RCMK K30S For RC Model Boat Gas
  10. Hobao 1/8 Hyper 7 TQ Ofna ENGINE MOUNT PLATE, SCREWS, NUTS JL .28 Mac Force



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Baby & Toddler Toys


Action Figures & Vehicles


Pretend Play


Games


Learning & Education Toys


Novelty & Gag Toys


Sports & Outdoor Play


Ride-On, Biking And Skating Toys


Kids Electronics & Video Games


Remote Controlled Vehicles


Model Building


Arts & Crafts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.