Frontpage > Toys and Hobby > Remote Controlled Vehicles > Suspension Systems & Parts

Best Suspension Systems & Parts - Buying Guide

Last Updated: 08/23/2019

Share on

Bestselling Suspension Systems & Parts on Amazon

  1. RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black
  2. Atomik RC Alloy Front Steering Block, Blue fits the Traxxas 1/10 Slash and Other Traxxas Models - Re...
  3. Traxxas 5862 Big Bore Shock Set, Complete with Springs
  4. Hobbypark 4-Pack Aluminum Damper Front & Rear Shock Absorber Springs Assembled for 1/10 Traxxas Slas...
  5. Traxxas 3767A Blue-Anodized Aluminum Shock Caps (fits Ultra Shocks) (set of four)
  6. Traxxas 3740 Steel Suspension Pins, 2.5x31.5mm (pair)
  7. RPM 80245 Front A-Arms Blue Monster Jam/Rustler/Stampede/Slash (2)
  8. Hobbypark for 1/10 Traxxas Slash 4x4 4wd Alloy Front & Rear Shock Absorber Springs Upgrade Parts RC ...
  9. Pro-Line Racing 6063-01 Power Stroke Shocks (Rear)
  10. Atomik RC Alloy Rear Axle Carrier, Blue fits the Traxxas 1/10 Slash and Other Traxxas Models - Repla...

  #1

RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black

Model: RPM80702   |    Mpn: 80702   |    Ean: 0885313655839   |    PartNumber: 80702   |   Asin: B0039N87Q4

Key Features

Compatible with the Slash 4x4, Stampede 4x4 and Rally 4x4 Each Arm is 6.5 grams lighter than stock One pair of arms included for front or rear of vehicle Overview

Add strenth while reducing weight on your Traxxas Slasy 4x4, Stampede 4x4 or Rally 4x4 with these front or rear A-arms from RPM. RPM tightened the tolerances around the hinge pins, reducing the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90%. As a bonus, RPM cut 6.5 grams of weight off of each A-arm for a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions. RPM A-arms carry over their traditional look with 30 degree leading and trailing edges and huge bosses for the shocks and sway bar mounts. RPM A-arms are molded in their trademark blend of incredibly durable nylons and are backed by an industry leading warranty.

Features

  • For the Traxxas Slash 4x4 and Stampede Front or Rear A-arms
  • Tech Notes: Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the rear axle.
  • Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
  • Backed by RPM's world-renowned breakage warranty
  • RPM is a proud American manufacturer designing and manufacturing 100% of our molded products right here in the USA!
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 0.39 x 4 x 4.1 inches (1.0 x 10.2 x 10.4 cm)   |   Package Dimensions: 0.25 x 4 x 6 inches (0.6 x 10.2 x 15.2 cm)

Amazon Price: $7.90 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

Warranty: Please refer to manufactuer warranty. If there are manufacture defects or any quality issues upon receiving your products, please contact us immediately. To return items, please keep the item condition new.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Atomik RC Alloy Front Steering Block, Blue fits the Traxxas 1/10 Slash and Other Traxxas Models - Replaces Traxxas Part 3736

Model: 4127B   |    Mpn: 4127B   |    Ean: 0845623040251   |    PartNumber: 4127B   |   Asin: B00DR7CLLY

Give your Traxxas 1/10 Slash the gift of alloy greatness with this Alloy Front Steering Block, Blue. Atomik RC has a full line of aluminum hop up parts for your Traxxas 1/10 Slash, available now in blue, red, and grey/gunmetal.

Replaces Traxxas Part No. 3736. Precision CNC Machined Hop Up Part for Factory Spec Fitment. Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.

Fits the Following Traxxas Models: Traxxas 1/10 Slash, Traxxas 1/10 Stampede, Traxxas 1/10 Rustler, Traxxas 1/10 Ford F150 SVT Raptor, Traxxas 1/10 Robby Gordon Dakar, Traxxas 1/10 Bandit, Traxxas 1/10 Nitro Slash, Traxxas 1/10 Monster Jam Series.

Features

  • Precision CNC Machined for Factory Spec Fitment.
  • Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.
  • Atomik RC Offers a Full Line of Hop Ups for your Traxxas Model, Available in Blue, Red, and Gunmetal
  • Also Fits: Traxxas 1/10 Stampede, 1/10 Rustler, 1/10 Ford F150 SVT Raptor, 1/10 Dakar, 1/10 Bandit
  • Easy Upgrade from Original Part. Replaces Traxxas Part 3736.
  • See more on Amazon...

Brand: Atomik RC   |   Manufacturer: Venom Group International

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 0.7 x 2.5 x 3.5 inches (1.8 x 6.4 x 8.9 cm)

Amazon Price: $12.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

Warranty: Atomik RC warrants all products to be free of material and workmanship defects for a period of 30 days from date of purchase for all electronic components and 90 days for all non-electronic components. If a component is defective or was not correctly made, Venom will, at its sole discretion, repair or replace the item free of charge. This is a non-transferable warranty and does not cover normal wear and tear, crash or water damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Traxxas 5862 Big Bore Shock Set, Complete with Springs

Model: TRA5862   |    Mpn: 5862   |    Ean: 0885127592849   |    PartNumber: 5862   |   Asin: B001VBCNGG

Traxxas Big Bore shocks are the perfect addition to your Traxxas model for the ultimate in bump and jump control. Hard-anodized aluminum bodies withstand the pressures of massive jumps. PTFE-coated shock bores and titanium-nitride coated shafts offer incredible durability and near frictionless operation for ultra smooth damping and long-lasting performance. The included progressive rate springs soak up small bumps with ease and prevent your vehicle from bottoming out on larger jumps. Progressive rate springs for 2WD Slash are included; for best performance with Rustler, Bandit, Stampede, Craniac and Skully install the springs included with your model. Big Bore Shocks are sold fully assembled as a set of four and include springs and shock oil. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Features

  • Hard-anodized & PTFE-coated T6 aluminum shock bodies withstand the pressures of your biggest jumps
  • Titanium-nitride coated shafts offer incredible durability and nearly frictionless operation for ultra-smooth damping
  • Shocks come fully-assembled with springs and shock oil included
  • Sold as a set of four
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 8.13 x 1.38 x 6.63 inches (20.7 x 3.5 x 16.8 cm)   |   Package Dimensions: 1.46 x 6.69 x 8.19 inches (3.7 x 17.0 x 20.8 cm)

Amazon Price: $48.53 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $70.00

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Hobbypark 4-Pack Aluminum Damper Front & Rear Shock Absorber Springs Assembled for 1/10 Traxxas Slash 4x4 4WD Upgrade Hop-Up Parts

 Ean: 0756970384434   |    PartNumber: 10301817   |   Asin: B071ZC8JGP

Attention Pls:These Shocks come without pre oiled so make sure you get some before installing

Note: The color of the item may vary slightly due to photography and your own computer / Phone
Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Item: Alloy Front & Rear Shock Absorber
Package Include:
2x Alloy Front Shock Absorber (Total length:approx 100mm)
2x Alloy Rear Shock Absorber (Total length:approx mm 115mm)

Features:
Front Shock Absorber:
Total Length : 100 mm
Hole center to hole center : 90 mm
Diameter: 22 mm

Rear Shock Absorber
Total Length : 115 mm
Hole center to hole center : 105 mm
Diameter: 22 mm

CNC machined for precision ;Heavy duty good for big jumps

Compatible with:1/10 Traxxas Slash 4x4

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc
  • 2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx mm 115mm),w/Screws
  • Replacement of Stock Model Part# 5862
  • CNC machined for precision ;Heavy duty good for big jumps
  • Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing)
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: DNhobby

Item Dimensions: 1.18 x 3.94 x 5.91 inches (3.0 x 10.0 x 15.0 cm)   |   Package Dimensions: 0.94 x 4.33 x 6.77 inches (2.4 x 11.0 x 17.2 cm)

Amazon Price: $27.98 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Traxxas 3767A Blue-Anodized Aluminum Shock Caps (fits Ultra Shocks) (set of four)

Model: TRA3767A   |    Mpn: 3767A   |    Ean: 0020334376756   |    PartNumber: 3767A   |   Asin: B002M7C566

Boost durability as you dress up your Traxxas model with anodized style! These aluminum shock caps are an ideal accessory for all Traxxas models equipped with Ultra Shocks Slash, Bandit, Nitro Sport, Stampede series, Rustler series, and all Maxx trucks! The machined caps fit precisely and hold tight, run after run, jump after jump. The caps install in minutes and add instant style with their rich anodized blue finish. Each genuine Traxxas accessory package includes four shock caps. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Features

  • Increased durability with anodized style!
  • Machined blue anodized aluminum caps (4)
  • Fits precisely and holds tight, jump after jump
  • Fits all Traxxas Ultra Shocks
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles!
  • This product is made from high quality materials, and designed for lasting performance.
  • This is replacement hardware for use on Traxxas vehicles, consult your user's manual for exact parts listings.
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 5.88 x 0.63 x 3.25 inches (14.9 x 1.6 x 8.3 cm)   |   Package Dimensions: 0.59 x 2.99 x 4.21 inches (1.5 x 7.6 x 10.7 cm)

Amazon Price: $14.00 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Traxxas 3740 Steel Suspension Pins, 2.5x31.5mm (pair)

Model: TRA3740   |    Mpn: 3740   |    Ean: 0020334374004   |    PartNumber: 3740   |   Asin: B0006O5KS2

This is the 3740 Pin 2.5x31.5mm Rustler (2) from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.

Features

  • Suspension pins, 2.5x31.5mm (king pins)
  • Comes with E-clips
  • Strengthens caster blocks
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance
  • This is for use on RC vehicles such as the Traxxas Rustler; consult your user's manual for exact parts listings
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 0.13 x 0.86 x 4.63 inches (0.3 x 2.2 x 11.8 cm)   |   Package Dimensions: 0.1 x 3 x 4.5 inches (0.3 x 7.6 x 11.4 cm)

Amazon Price: $2.50 | as of 08/23/2019(12:58am pst)
Availibility:
List Price:

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

RPM 80245 Front A-Arms Blue Monster Jam/Rustler/Stampede/Slash (2)

Model: RPM80245   |    Mpn: 80245   |    Ean: 0885730304068   |    PartNumber: 80245   |   Asin: B000JQWQM0

Key Features

Nearly 25% lighter than stock Stronger material resists flexing and breaking Increased clearance in outer area of arms

Features

  • For use on the E-Rustler, Stampede, Monster Jam, and Slash
  • Tech Note: These A-arms will not work on the nitro versions of the Rustler and Stampede
  • Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
  • Backed by RPM's world-renowned breakage warranty
  • RPM is a proud American manufacturer designing and manufacturing 100% of our molded products right here in the United States
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP (Level 3 Products)

Item Dimensions: 4.13 x 0.75 x 4.25 inches (10.5 x 1.9 x 10.8 cm)   |   Package Dimensions: 0.28 x 2.99 x 5 inches (0.7 x 7.6 x 12.7 cm)

Amazon Price: $7.14 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99 | Used Price: $9.37

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Hobbypark for 1/10 Traxxas Slash 4x4 4wd Alloy Front & Rear Shock Absorber Springs Upgrade Parts RC Car Replacement

 Ean: 0756970381396   |   Asin: B01INA991O

Attention Pls:These Shocks come without pre oiled so make sure you get some before installing

Note: The color of the item may vary slightly due to photography and your own computer / Phone
Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Item: Alloy Front & Rear Shock Absorber
Package Include:
2x Alloy Front Shock Absorber (Total length:approx 100mm)
2x Alloy Rear Shock Absorber (Total length:approx mm 115mm)

Features:
Front Shock Absorber Total Length : 100 mm
Hole center to hole center : 90 mm
Diameter: 22 mm

Rear Shock Absorber
Total Length : 115 mm
Hole center to hole center : 105 mm
Diameter: 22 mm

CNC machined for precision ;Heavy duty good for big jumps

Compatible with:1/10 Traxxas Slash 4x4 4wd

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc
  • 2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx mm 115mm),w/Screws
  • Replacement of Stock Model Part# 5862
  • CNC machined for precision ;Heavy duty good for big jumps
  • Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing)
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: DNhobby

Item Dimensions: 0.8 x 5.7 x 6 inches (2.0 x 14.5 x 15.2 cm)   |   Package Dimensions: 0.8 x 5.7 x 6 inches (2.0 x 14.5 x 15.2 cm)

Amazon Price: $27.98 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Pro-Line Racing 6063-01 Power Stroke Shocks (Rear)

Model: PRO606301   |    Mpn: 6063-01   |    Ean: 0675118150529   |    PartNumber: 6063-01   |   Asin: B0030DLTX6

Enhance the overall performance of your stock Slash or your ProTrac Suspension Kit Slash with PowerStroke Shocks

Features

  • Fits stock Slash, ProTrac Suspension Kit for Slash, Slash 4X4
  • Fits SC10, Blitz and Ultima SC with 6063-05 Universal Adapters
  • Made in the United States, since 1982
  • See more on Amazon...

Brand: Pro-line Racing   |   Manufacturer: HRP (Level 3 Products)

Package Dimensions: 1 x 5 x 7.5 inches (2.5 x 12.7 x 19.1 cm)

Amazon Price: $46.20 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $62.99

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Atomik RC Alloy Rear Axle Carrier, Blue fits the Traxxas 1/10 Slash and Other Traxxas Models - Replaces Traxxas Part 3752

Model: 4138B   |    Mpn: 4138B   |    Ean: 0845623040336   |    PartNumber: 4138B   |   Asin: B00DR7CL14

Give your Traxxas 1/10 Slash the gift of alloy greatness with this Alloy Rear Axle Carrier, Blue. Atomik RC has a full line of aluminum hop up parts for your Traxxas 1/10 Slash, available now in blue, red, and grey/gunmetal.

Replaces Traxxas Part No. 3752. Precision CNC Machined Hop Up Part for Factory Spec Fitment. Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.

Fits the Following Traxxas Models: Traxxas 1/10 Slash, Traxxas 1/10 Stampede, Traxxas 1/10 Rustler, Traxxas 1/10 Ford F150 SVT Raptor, Traxxas 1/10 Robby Gordon Dakar, Traxxas 1/10 Bandit, Traxxas 1/10 Monster Jam Series.

Features

  • Precision CNC Machined for Factory Spec Fitment.
  • Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.
  • Atomik RC Offers a Full Line of Hop Ups for your Traxxas Model, Available in Blue, Red, and Gunmetal
  • Also Fits: Traxxas 1/10 Stampede, 1/10 Rustler, 1/10 Ford SVT Raptor, 1/10 Dakar, 1/10 Bandit
  • Easy Upgrade from Original Part. Replaces Traxxas Part 3752.
  • See more on Amazon...

Brand: Atomik RC   |   Manufacturer: Venom Group International

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 0.4 x 2.6 x 3.75 inches (1.0 x 6.6 x 9.5 cm)

Amazon Price: $11.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

Warranty: Atomik RC warrants all products to be free of material and workmanship defects for a period of 30 days from date of purchase for all electronic components and 90 days for all non-electronic components. If a component is defective or was not correctly made, Venom will, at its sole discretion, repair or replace the item free of charge. This is a non-transferable warranty and does not cover normal wear and tear, crash or water damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Hobbypark 4PCS Aluminum Front & Rear Shock Absorber Assembled Red for 1/10 Traxxas Slash 4x4 4WD Option Parts

 Ean: 0756970384809   |   Asin: B0719WRG7D

Attention Pls:These Shocks come without pre oiled so make sure you get some before installing

Note: The color of the item may vary slightly due to photography and your own computer / Phone
Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Item: Alloy Front & Rear Shock Absorber
Package Include:
2x Alloy Front Shock Absorber (Total length:approx 100mm)
2x Alloy Rear Shock Absorber (Total length:approx mm 115mm)

Features:
Front Shock Absorber:
Total Length : 100 mm
Hole center to hole center : 90 mm
Diameter: 22 mm

Rear Shock Absorber
Total Length : 115 mm
Hole center to hole center : 105 mm
Diameter: 22 mm

CNC machined for precision ;Heavy duty good for big jumps

Compatible with:1/10 Traxxas Slash 4x4

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc
  • 2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx mm 115mm),w/Screws
  • Replacement of Stock Model Part# 5862
  • CNC machined for precision ;Heavy duty good for big jumps
  • Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing)
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: DNhobby

Package Dimensions: 1.02 x 4.49 x 8.5 inches (2.6 x 11.4 x 21.6 cm)

Amazon Price: $27.98 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

fosa 4Pcs RC Shock Absorbers, Aluminum Alloy High Strength Springs Shocks Set Damper with 2 Bags of Screws for Axial / SCX10 / D90 / TRX-4 RC Crawler Car

 Ean: 0736342168466   |    PartNumber: fosano9ub0e1xz   |   Asin: B07NMBDBBY

Specification:
Condition: 100% Brand New
Item Type: RC Accessory
Material: Metal
Color: As Shown in the Picture
Hole to Hole (Compressed): Approx. 75mm / 2.95inch
Hole to Hole (Uncompressed): Approx. 90mm / 3.54inch
Total Length: Approx. 100mm / 3.94inch
Travel Length: Approx. 25mm / 0.98inch
Shock Body Outer Diameter: Approx. 10mm / 0.39inch
Spring Body Outer Diameter: Approx. 14.5mm / 0.57inch
Shaft Diameter: Approx. 3.5mm / 0.14inch
Weight: Approx. 152g

Package list:
4 * Shock Absorbers
2 Bags of Screws

Note:
The shock not fill oil.
Please allow slight deviation for the color and measurement. Thanks for your understanding.

Features

  • Suitable for Axial / SCX10 / D90 / TRX-4 RC crawler car
  • CNC machining aluminum with anodizing, which makes it solid, durable and of exquisite appearance
  • Double spring design for best performance
  • Nice replacement accessories for the old or broken one
  • Fine in workmanship and high in quality
  • See more on Amazon...

Brand: fosa   |   Manufacturer: fosa

Item Dimensions: 0.67 x 1.38 x 3.94 inches (1.7 x 3.5 x 10.0 cm)   |   Package Dimensions: 1.34 x 3.58 x 5.47 inches (3.4 x 9.1 x 13.9 cm)

Amazon Price: $33.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $42.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

RPM 73755 Front Bulkhead for Traxxas 1/10 2WD Vehicles, Blue

Model: RPM73755   |    Mpn: RPM73755   |    Ean: 0672415737552   |    PartNumber: RPM73755   |   Asin: B01IBWTSQU

One of the most highly sought-after RPM parts is finally here! the RPM front bulkhead for 1: 10 scale Traxxas 2WD vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! the RPM front bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? first and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! by coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM front bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited Lifetime warranty against breakage. If you want strength you can Count on and engineering you can trust, look no further than RPM! Tech notes: RPM front bulkheads for 2WD Traxxas 1: 10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 and #2530A. This bulkhead fits the following vehicles: Slash 2WD, nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede and electric Stampede 2WD (including its variants, the Skully and Craniac). it does not fit the 4 4 versions of any of these vehicles.

Features

  • Designed to increase durability
  • Replaces weaker stock components, check for full parts compatibility
  • Made by RPM R/C products, a United States based company where resources are sourced from American producers
  • Replaces stock Traxxas #2530 and #2530A
  • Fits the Slash 2WD, Nitro Slash, Bandit, Electric Rustler, Nitro Rustler, Nitro Stampede and Electric Stampede 2WD
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRPAA

Item Dimensions: 4 x 1 x 4 inches (10.2 x 2.5 x 10.2 cm)   |   Package Dimensions: 0.87 x 4.06 x 6.57 inches (2.2 x 10.3 x 16.7 cm)

First Available: 2017-01-01

Amazon Price: $7.85 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $10.63 | Used Price: $9.32

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

ProLine 606305 Powerstroke SC Universal Shock Mounting Hardware Kit

Model: PRO606305   |    Mpn: PRO606305   |    Ean: 0675118155760   |    PartNumber: PRO606305   |   Asin: B0045MK680

This is a Pro-Line Power Stroke SC Universal Hardware Kit. Pro-Line Power Stroke SC Shocks are not just for Slash any more. Now you can mount these race proven dampers to literally any Short Course or desert truck using Pro-Line's Universal Hardware Kit.

Features

  • High quality 3mm hardware
  • Machined Delran pivot balls for smooth action
  • Universal kit can be used on a wide variety of SC trucks
  • See more on Amazon...

Brand: PROLINE   |   Manufacturer: Proline

Item Dimensions: 5.63 x 0.13 x 5 inches (14.3 x 0.3 x 12.7 cm)   |   Package Dimensions: 0.3 x 3.9 x 5.7 inches (0.8 x 9.9 x 14.5 cm)

Amazon Price: $11.16 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

RPM 80185 Rear A-Arms Blue E- Monster Jam, Rustler, Stampede

Model: RPM80185   |    Mpn: 80185   |    Ean: 0885313118822   |    PartNumber: 80185   |   Asin: B000KKDMFU

Overview

RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash - they are not multi-platform A-arms like the stock versions.

Our first design challenge was to beef up our version of the Slash rear A-arms to handle some serious abuse. The material around the inner and outer hinge pins has been increased by a whopping 64%! We then eliminated all of the unnecessary holes and shock mounts that would be needed on other vehicles but not on the Slash, which significantly reduced the weight of our A-arms while improving crash durability. Even after all of the increased muscle has been factored in, our A-arms still come in at over 10% lighter than the original arms! Our final design task was to improve the fit and finish and what we came up with will eliminate most of the slop in the rear suspension system! The Slash owner can tighten things up to near perfect out back simply by adding in a set of our #80382 Rear Bearing Carriers currently available. RPM Slash rear A-arms use stock suspension geometry and include stock rear toe angles.


RPM Slash rear A-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track. Additionally, the new geometry design leaves no place for dirt and rocks to get caught in the lower A-arm and reduces the chances of rocks and debris getting stuck between the axle and the arm.

RPM Slash rear A-arms are sold in pairs. They are molded in our nearly indestructible blend of nylons and are sold in either black our blue. These A-arms are backed by our limited lifetime warranty against breakage as well for confidence-inspiring durability and performance.

Features

  • For use on the E-Rustler, Stampede, and Monster Jam
  • Tech Note: These A-arms will not work on the nitro versions of the Rustler and Stampede
  • Serious strength and rigidity while the chemical make up of our proprietary blend of nylons provides unmatched durability
  • Backed by RPM's world-renowned breakage warranty
  • RPM is a proud American manufacturer designing and manufacturing 100% of our molded products right here in the United States
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP (Level 3 Products)

Item Dimensions: 4.13 x 0.38 x 6.5 inches (10.5 x 1.0 x 16.5 cm)   |   Package Dimensions: 0.7 x 3.7 x 4.1 inches (1.8 x 9.4 x 10.4 cm)

Amazon Price: $7.14 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Pro-Line Racing 6063-00 Power Stroke Shocks (Front)

Model: PRO606300   |    Mpn: 6063-00   |    Ean: 0675118150512   |    PartNumber: 6063-00   |   Asin: B0030DEC2G

Key Features

True dual-stage spring rate Aluminum body and shock cap Infinite spring pre-load adjustment Beefy 3.5mm shock shafts Injection-molded, super durable spring retainer and shock ends Bladder sealed shock cap Free-flow molded pistons Dual O-ring seats and upper and lower shock shaft guides Pre-assembled - just add oil Fits stock Slash - ProTrac Suspension Kit for Slash and Slash 4X4 Overview

Enhance the overall performance of your stock Slash and Slash 4X4 or your ProTrac Suspension Kit Slash with PowerStroke Shocks.

What's included:
Pre-assembled PowerStroke Performance Shocks Front (2 pcs)

Features

  • Fits stock Slash, ProTrac Suspension Kit for Slash, Slash 4X4
  • Fits SC10, Blitz and Ultima SC with 6063-05 Universal Adapters
  • Made in the United States, since 1982
  • Aluminum body and shock cap, Pre-assembled just add oil!
  • Infinite spring pre-load adjustment
  • See more on Amazon...

Brand: Pro-line Racing   |   Manufacturer: HRP (Level 3 Products)

Item Dimensions: 1 x 4.8 x 7.4 inches (2.5 x 12.2 x 18.8 cm)   |   Package Dimensions: 0.5 x 4.6 x 7.2 inches (1.3 x 11.7 x 18.3 cm)

Amazon Price: $45.49 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $62.99

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

RPM Front Shock Tower 2WD Electric Slash, Stampede, Rustler, Bandit, Black

Model: RPM80852   |    Mpn: 80852   |    Ean: 0885838596778   |    PartNumber: 80852   |   Asin: B000RJK0EA

RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this vital suspension component. Our design uses an I-beam structure that adds tremendous levels of strength and rigidity that is far superior to u-shaped or flat designs. Our front shock towers will not flex nearly as easily as the stock versions yet have enough give in them, which prevents breakage from hard impacts or crashes. RPM shock towers are molded in black and are made from our well-reputed blend of materials. These shock towers are so strong; we back them with our extremely well known policy against breakage.

Features

  • Designed to increase durability
  • Replaces weaker stock components
  • Proudly made in the USA
  • See more on Amazon...

Brand: RPM   |   Manufacturer: HRP Distribution

Item Dimensions: 0.63 x 4 x 5.5 inches (1.6 x 10.2 x 14.0 cm)   |   Package Dimensions: 1 x 3.6 x 4 inches (2.5 x 9.1 x 10.2 cm)

Amazon Price: $5.22 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

Warranty: Warranty Terms and Restrictions: http://www.rpmrcproducts.com/faq/warranty.htm

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Hobbypark Shock Absorber Assembled Front & Rear Shocks for 1/10 Traxxas Slash 4x4 4WD Upgrade Parts (4-Pack) (Black)

 PartNumber: 6982-7086   |   Asin: B07M7KPQX8

Attention Pls:These Shocks come without pre oiled /Just Little for testing purpose,so make sure you get some before installing

Note: The color of the item may vary slightly due to photography and your own computer
Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Item: Front & Rear Shock Absorber Springs
Package Include:
2x Front Shock Absorber (Total length:approx 100mm)
2x Rear Shock Absorber (Total length:approx mm 115mm)

Features:
Front Shock Absorber:
Total Length : 100 mm
Hole center to hole center : 90 mm
Diameter: 22 mm

Rear Shock Absorber
Total Length : 115 mm
Hole center to hole center : 105 mm
Diameter: 22 mm

CNC machined for precision ;Heavy duty good for big jumps

Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • Compatible with:1/10 Traxxas Slash 4x4 / Stampede 4x4 / Rustler 4X4 VXL / Rally 4X4 ,etc.
  • 2x Front Shock Absorber ,Aluminum Cap & Plastic on the bottom (Total length:approx 100mm)
  • 2x Rear Shock Absorber, Aluminum Cap & Plastic on the bottom (Total length:approx mm 115mm)
  • CNC machined for precision ;Heavy duty good for big jumps
  • Pack of 4 (These Shocks come without pre oiled /Just Little for testing purpose,so make sure you get some before installing)
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: HobbyPark

Package Dimensions: 1 x 3.6 x 6.8 inches (2.5 x 9.1 x 17.3 cm)

Amazon Price: $27.98 | as of 08/23/2019(12:58am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Hot Racing SLS90T1111 Suspension Travel Limit Straps 90mm (Gunmetal)(2)

 Ean: 0782675077357   |    PartNumber: SLS90T1111   |   Asin: B0178GRMK4

Hot Racing scale functional suspension limit straps limit suspension travel on all types of off-road R/C vehicles, including rock crawlers and racers. Limit straps are used to take stress off shocks and to control suspension extension. For example, when crawling up or descending steep grades, straps tied to the center of an axle are useful to limit the suspension from unloading and the vehicle from rolling, all while keeping suspension articulation intact. From climbing, to droop control, to super scale looks, these limit straps will get you further and get you noticed!FEATURES: - Woven 2-ply Nylon fabric strap material- CNC machined aluminum clevis buckles, anodized gunmetal in colorYOU WILL RECEIVE: - Two (2) 90mm (nominal length) limit strapsREQUIREMENTS: - Installation on vehicle, custom mounting may be required- Mounting hardware to suit installationSPECIFICATIONS: - Length eye-to-eye: 90mm (3.54 inch)- Total length end-to-end: 97mm (3.81 inch) - Nominal strap size: 8x2.3mm (0.31x0.09 inch) - Eyelet hole size: 3.3mm (0.13 inch) - for a 3mm screwCOMMENTS: - These straps are made from 200 lb. test nylon and offers minimal stretch to provide a consistent strap length and to protect against overextending shocks- Tested on extreme off-road terrain- Strap lengths are measured from the center of the mounting holes and are accurate to +/- 3mm- Recommendation: when ordering, choose a limit strap that is at least 5mm shorter than the shock to prevent full extension and possible breakage of shockdescription revised by: SN October 26, 2015

Features

  • Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers
  • All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required
  • Hot Racing part number SLS90T1111; UPC 083745970470
  • This item works with: Axial AX-10 Deadbolt, AX-10 Ridgecrest Crawler, EXO 4WD Terra Buggy Kit, SCX-10 Scale Truck, Wraith 4WD Rock Racer RTR, XR10 Crawler, Yeti; ECX 1:18 Temper Rock Crawler; Vaterra Ascender 1:10 Chevrolet K5 Blazer
  • See more on Amazon...

Brand: Hot Racing   |   Manufacturer: Hot Racing

Item Dimensions: 0.3 x 3 x 3.8 inches (0.8 x 7.6 x 9.7 cm)   |   

Amazon Price: $6.88 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $7.22

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Traxxas 1/16 Scale Rear Bulkhead Halves with Screws

Model: TRA7029X   |    Mpn: 7029X   |    Ean: 0020334702999   |    PartNumber: 7029X   |   Asin: B003G0RX1K

This is the 7029X Bulkhead Rear Lt/Rt 3x10mm BCS (4) from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.

Features

  • Plastic construction
  • Black in color
  • Replacement for worn or damaged rear bulkhead
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance
  • This is for use on RC vehicles such as the Traxxas 1/16 Line up; consult your user's manual for exact parts listings
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 6.25 x 0.65 x 3.13 inches (15.9 x 1.7 x 8.0 cm)   |   Package Dimensions: 0.1 x 0.3 x 5.8 inches (0.3 x 0.8 x 14.7 cm)

Amazon Price: $6.00 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $6.00

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

RPM 80249 Traxxas Slash 2WD, Nitro Slash, E-Stampede 2WD and E-Rustler

Model: RPM80249   |    Mpn: RPM80249   |    Ean: 0672415802496   |    PartNumber: RPM80249   |   Asin: B010AWZWQE

RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse.

Features

  • Fits all versions of the Traxxas Slash 2wd, Nitro Slash, electric Stampede 2wd & electric Rustler
  • nearly 25% lighter than stock
  • Red Colored
  • See more on Amazon...

Brand: RPM   |   Manufacturer: RPM

Item Dimensions: 5.63 x 0.38 x 3.06 inches (14.3 x 1.0 x 7.8 cm)   |   Package Dimensions: 0.47 x 1.97 x 5.12 inches (1.2 x 5.0 x 13.0 cm)

Amazon Price: $7.02 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $10.69

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

RPM 80599 A-Arms-Red Traxxas Slash 2WD Rear

Model: RPM80599   |    Mpn: RPM80599   |    Ean: 0672415805992   |    PartNumber: RPM80599   |   Asin: B010AX0MLI

RPM Slash 2wd rear A-arms are not only stronger and more durable than stock, they are also more rigid and less flexible too, making them the perfect addition to those race-level Slashes on the track. Additionally, the new geometry design leaves no place for dirt and rocks to get caught in the lower A-arm and reduces the chances of rocks and debris getting stuck between the axle and the arm.

Features

  • Specifically designed for the Slash 2wd exclusively
  • Not for use on the Nitro Slash
  • Red Colored
  • See more on Amazon...

Brand: RPM   |   Manufacturer: RPM

Item Dimensions: 6 x 0.38 x 4.06 inches (15.2 x 1.0 x 10.3 cm)   |   Package Dimensions: 0.39 x 3.46 x 4.33 inches (1.0 x 8.8 x 11.0 cm)

Amazon Price: $7.64 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $10.93

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Atomik RC Alloy Front Lower Bulkhead, Red fits the Traxxas 1/10 Slash and Other Traxxas Models - Replaces Traxxas Part 2530

Model: 4141R   |    Mpn: 4141R   |    Ean: 8855452061855   |    PartNumber: 4141R   |   Asin: B009VUUB4U

Give your Traxxas 1/10 Slash the gift of alloy greatness with this Alloy Front Lower Bulkhead, Red. Atomik RC has a full line of aluminum hop up parts for your Traxxas 1/10 Slash, available now in blue, red, and grey/gunmetal.

Replaces Traxxas Part No. 2530. Precision CNC Machined Hop Up Part for Factory Spec Fitment. Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.

Fits the Following Traxxas Models: Traxxas 1/10 Slash, Traxxas 1/10 Stampede, Traxxas 1/10 Rustler, Traxxas 1/10 Ford F150 SVT Raptor, Traxxas 1/10 Robby Gordon Dakar, Traxxas 1/10 Bandit, Traxxas 1/10 Nitro Slash, Traxxas 1/10 Monster Jam Series, Traxxas 1/10 Nitro Stampede, Traxxas 1/10 Nitro Rustler, Traxxas 1/10 Nitro Sport.

Features

  • Precision CNC Machined for Factory Spec Fitment.
  • Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.
  • Atomik RC Offers a Full Line of Hop Ups for your Traxxas Model, Available in Blue, Red, and Gunmetal
  • Also Fits: Traxxas 1/10 Stampede, 1/10 Rustler, 1/10 Ford F150 SVT Raptor, 1/10 Dakar, 1/10 Bandit
  • Easy Upgrade from Original Part. Replaces Traxxas Part 2530.
  • See more on Amazon...

Brand: Atomik RC   |   Manufacturer: Venom Group International

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 0.1 x 3.6 x 3.8 inches (0.3 x 9.1 x 9.7 cm)

Amazon Price: $15.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

Warranty: Atomik RC warrants all products to be free of material and workmanship defects for a period of 30 days from date of purchase for all electronic components and 90 days for all non-electronic components. If a component is defective or was not correctly made, Venom will, at its sole discretion, repair or replace the item free of charge. This is a non-transferable warranty and does not cover normal wear and tear, crash or water damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

ST Racing 6MM HD Aluminum Front Shock Tower for Traxxas 2WD Electrics

Model: SPTST3639B   |    Mpn: ST3639B   |    Ean: 0885889912435   |    PartNumber: ST3639B   |   Asin: B005QCKR8C

STRC 6mm HD Front Shock Tower, Blue: Stampede, Rustler, Bandit, Slash, STRT3639B

Features

  • Designed For Stampede, Rustler, Slash, Bandit, or Monster Jam
  • High Quality CNC Machined Aluminum
  • High Quality Finish
  • Precision measurements for a perfect fit
  • A perfect upgrade for your vehicle
  • See more on Amazon...

Brand: S & T RACING INC   |   Manufacturer: HRP Distribution

Item Dimensions: 4.13 x 0.25 x 5.25 inches (10.5 x 0.6 x 13.3 cm)   |   Package Dimensions: 0.5 x 4 x 5 inches (1.3 x 10.2 x 12.7 cm)

Amazon Price: $15.90 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 1-2 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Hobbypark Aluminum Suspension Arms,Front & Rear, w/Tie Bar Replacement of 2555 3631 for 1/10 Traxxas Slash 2WD Option Parts (Sliver)

 PartNumber: 7902-7905   |   Asin: B07VCQVS3W

Note:The color of the item may vary slightly due to photography and your own computer /Phone
Please allow some little manual measurement error.
Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • These are OEM Hop-Up Upgrade Parts for Traxxas 1/10 Slash 2WD Short Course Racing Truck RC Car, DO NOT FIT Stampede 2WD / Rustler VXL, Consult your user's manual for exact parts listings.
  • Not the Cheap Ones,Come with Screw Pins,Easy upgrade from the original part
  • Made of Aluminum Alloy,Anodized,CNC machined,High precision
  • Package Include: 4x Alloy A-Arms (2xLeft & 2x Right), 1x Alloy Tie Bar. (Not Include The Car)
  • 100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: HobbyPark

Package Dimensions: 1 x 3.4 x 4.6 inches (2.5 x 8.6 x 11.7 cm)

Amazon Price: $34.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Red-Anodized Aluminum Shock Tower Rear for 1/10 RC Traxxas Slash 2WD Trucks

 Ean: 0712195632538   |    PartNumber: US96-78308011   |   Asin: B07VH52WWB

Package List:
1x Alloy Rear Shock Tower
12x Screws
4x Locking Nuts

Product Weight: Approx. 63g

Feature:
1.Suitable for Slash 2WD, but not good for Stampede 2WD

Note:
1.Actual product may vary slightly from photos shown. Please allow us to have some slight measurement errors.
2.Please feel free to contact with us if there is any quality issue, we will try our best to make you satisfied.

Features

  • Hard-anodized alloy material and designed for lasting performance
  • Include button-head machine hex drive screws (12pcs) and flanged nylon locking nuts (4pcs)
  • Hop-up upgrade parts for 1:10 Scale RC model car Traxxas Slash 2WD
  • Not suitable for Stampede 2WD
  • See more on Amazon...

Brand: XINDELE   |   Manufacturer: XINDELE

Package Dimensions: 1.18 x 3.94 x 5.91 inches (3.0 x 10.0 x 15.0 cm)

Amazon Price: $19.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $34.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Red-Anodized Aluminum Front Shock Tower 3639 for 1/10 RC Traxxas Slash 2WD Trucks

 Ean: 0712195632521   |    PartNumber: US96-78448010   |   Asin: B07VCXYQTK

Package List:
1x Alloy Front Shock Tower
8x Screws
2x Hollow Balls

Product Weight: Approx. 38g

Feature:
1. Replacement part #3639 for 1:10 Traxxas 2WD trucks, like Slash, Stampede, Rustler Skully, Bandit, Nitro Stampede, Ford Raptor, please consult your user's manual for exact parts listings

Note:
1.Actual product may vary slightly from photos shown. Please allow us to have some slight measurement errors.
2.Please feel free to contact with us if there is any quality issue, we will try our best to make you satisfied.

Features

  • Hardened billet 6061 alloy for durable performance
  • CNC machined high precision and incredible detail
  • Include button-head machine hex drive screws (8pcs) and 2pcs hollow balls
  • Hop-up upgrade part #3639 for 1:10 Traxxas 2WD trucks, like Slash, Stampede, Rustler Skully, Bandit, Nitro Stampede, Ford Raptor, please consult your user's manual for exact parts listings
  • See more on Amazon...

Brand: XINDELE   |   Manufacturer: XINDELE

Package Dimensions: 1.18 x 3.94 x 5.91 inches (3.0 x 10.0 x 15.0 cm)

Amazon Price: $16.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

Hobbypark Aluminum Suspension Arms,Front & Rear, w/Tie Bar Replacement of 2555 3631 for 1/10 Traxxas Slash 2WD Upgrade Parts (Red)

 PartNumber: 7902-7905   |   Asin: B07VBM5L86

Note:The color of the item may vary slightly due to photography and your own computer /Phone
Please allow some little manual measurement error.
Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • These are OEM Hop-Up Upgrade Parts for Traxxas 1/10 Slash 2WD Short Course Racing Truck RC Car, DO NOT FIT Stampede 2WD / Rustler VXL, Consult your user's manual for exact parts listings.
  • Not the Cheap Ones,Come with Screw Pins,Easy upgrade from the original part
  • Made of Aluminum Alloy,Anodized,CNC machined,High precision
  • Package Include: 4x Alloy A-Arms (2xLeft & 2x Right), 1x Alloy Tie Bar.(Not Include The Car)
  • 100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: HobbyPark

Package Dimensions: 1.3 x 4.4 x 6.1 inches (3.3 x 11.2 x 15.5 cm)

Amazon Price: $34.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $69.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

Leslaur ZD Racing 2pcs 143mm Rear Shock Absorber Damper Suspension for 1/8 JLB HSP HPI Redcat RC Car Truck Buggy

 Ean: 0791317560713   |   Asin: B07V54S3SM

The rear shock absorbers are multiple-functional and high-quality, which is easy to install and simple to replace your old one and allow your car have a high performance. Specification: Brand: ZD Racing Name: Rear Shock Absorber Length: 143mm Max. Diameter: 25mm Hole to Hole Distance: 132mm Package Information: Package Size: 14.3 * 10 * 3cm / 5.62 * 3.93 * 1.18in Package Weight: 98g Poly Bag Package Note: There may be color difference due to different monitors. Thanks for your understanding. Package List: 1 * Pair of Rear Shock Absorber

Features

  • Attractive design: It can give you a excellent experience
  • Lightweight, exquisite workmanship and high-performance
  • Perfect for 1/8 JLB HSP EM Racing DHK HPI Redcat LRP Hobao ZD Racing Hongnor DF-Model RC Car Truck Buggy
  • It is made of aluminium alloy,which can support a long service life
  • The shock absorber will greatly reduce the shake and improve the stability
  • See more on Amazon...

Brand: Leslaur   |   Manufacturer: Leslaur

Item Dimensions: 1.18 x 3.94 x 5.63 inches (3.0 x 10.0 x 14.3 cm)   |   

Amazon Price: $15.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 1-2 business days
List Price: $15.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

Hobbypark Aluminum Front Suspension Arms w/Tie Bar Replacement of 3631 for 1/10 Traxxas Slash 2WD Option Parts (Red, 7.5mm Thickness)

 PartNumber: 7820-7905   |   Asin: B07VBLH9F9

Note:The color of the item may vary slightly due to photography and your own computer /Phone
Please allow some little manual measurement error.
Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • These are OEM Hop-Up Upgrade Parts for RC Car 1/10 Scale Traxxas Slash 2WD / Stampede 2WD / Rustler VXL ,Consult your user's manual for exact parts listings.
  • Not the Cheap Ones,Come with Screw Pins,Easy upgrade from the original part
  • Made of Aluminum Alloy,Anodized,CNC machined,High precision
  • Package Include: 2x Alloy A-Arms (1xLeft & 1x Right), 1x Alloy Tie Bar
  • 100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: HobbyPark

Package Dimensions: 0.3 x 5.9 x 6.5 inches (0.8 x 15.0 x 16.5 cm)

Amazon Price: $23.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

Woyisisi RC Truck Shocks Absorber RC Truck Upgrade Parts Oil Pressure Shocks Absorber for 9300-9304 1/18 Model Car

 Ean: 0707300933457   |    PartNumber: Woyisisimh6xs9y1cw   |   Asin: B07V1FDJS2

Features:
1. High quality material has high strength and durability.
2. Reasonable design, reduce unnecessary energy loss.
3. High precision, perfect matching models as replacement of original parts.
4. Improve the performance of model car and add more fun to your remote control.
5. Exquisite appearance and light weight, easy and convenient to install and use.

Specification:
Condition: 100% Brand New
Item Type: RC Accessory
Brand: PXtoys
Material: Hardware, nylon
Art.No: PX9300-01A
Color: As Pictures Shown
Item Length: Approx. 6cm/2.4in
Package Size: Approx. 9 * 6.5 * 1.5cm/3.5 * 2.6 * 0.6in
Weight: Approx. 14.3g
Fitment: for 1/18 9300-9304 series high car

Package List:
2 * RC Oil Pressure Shocks Absorber

Note:
Please allow slight deviation of 1-3mm for manual measurement. Thanks for your understanding.

Features

  • High quality material has high strength and durability.
  • Reasonable design, reduce unnecessary kinetic energy loss.
  • High precision, perfect matching models as replacement of original parts.
  • Improve the performance of model car and add more fun to your remote control.
  • Exquisite appearance and light weight, easy and convenient to install and use.
  • See more on Amazon...

Brand: Woyisisi   |   Manufacturer: Woyisisi

Amazon Price: $3.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 1-2 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #32

Hobbypark Aluminum Suspension Arms,Front & Rear, w/Tie Bar Replacement of 2555 3631 for 1/10 Traxxas Slash 2WD Upgrade Parts (Blue)

 PartNumber: 7902-7905   |   Asin: B07VDPT882

Note:The color of the item may vary slightly due to photography and your own computer /Phone
Please allow some little manual measurement error.
Customer Satisfaction Guarantee
If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!

Note:Check your specific model's manual for compatibility,or Contact us.

Features

  • These are OEM Hop-Up Upgrade Parts for Traxxas 1/10 Slash 2WD Short Course Racing Truck RC Car, DO NOT FIT Stampede 2WD / Rustler VXL, Consult your user's manual for exact parts listings.
  • Not the Cheap Ones,Come with Screw Pins,Easy upgrade from the original part
  • Made of Aluminum Alloy,Anodized,CNC machined,High precision
  • Package Include: 4x Alloy A-Arms (2xLeft & 2x Right), 1x Alloy Tie Bar.(Not Include The Car)
  • 100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable
  • See more on Amazon...

Brand: Hobbypark   |   Manufacturer: HobbyPark

Package Dimensions: 0.9 x 3.5 x 3.6 inches (2.3 x 8.9 x 9.1 cm)

Amazon Price: $34.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 24 hours
List Price: $69.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #33

Integy RC Model Hop-ups C28730GREEN Billet Machined Front Lower Suspension Arm for Arrma 1/8 Kraton 6S BLX

 PartNumber: C28730GREEN   |   Asin: B07VND8G3B

OVERVIEW: Add some color and strength to your Arrma 1/8 Kraton 6S BLX with our new Billet Machined Lower Suspension Arms. Our suspension arms feature a sleek design with suspension shaft inserts. The Billet Machined Lower Suspension Arms are sold in pairs and are available in six anodized colors. The front lower arms are #C28730, and the matching rear lower arms are #C28732.Note: If you do not know how to assemble or install a product, please ask your local dealer for assistance. We do not guarantee product compatibility with other aftermarket branded products. Extra hardware and/or permanent modification may be required to install some products. Some products may eliminate certain OEM features. Some Integy-branded items may be only compatible with the vehicle's OEM parts but not with another Integy-branded item due to design limitations. For multiple-fitment items, some parts may not be used based on application. Item# C28730GREEN Barcode: 91789035191

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Amazon Price: $39.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 2-3 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #34

Integy RC Model Hop-ups C28731GREEN Billet Machined Front Upper Suspension Arm for Arrma 1/8 Kraton 6S BLX

 PartNumber: C28731GREEN   |   Asin: B07VKS58L5

OVERVIEW: Add some color and strength to your Arrma 1/8 Kraton 6S BLX with our new Billet Machined Front Upper Suspension Arms. Our suspension arms feature a sleek design with suspension shaft inserts. The Billet Machined Front Upper Suspension Arms are sold in pairs and are available in six anodized colors.Note: If you do not know how to assemble or install a product, please ask your local dealer for assistance. We do not guarantee product compatibility with other aftermarket branded products. Extra hardware and/or permanent modification may be required to install some products. Some products may eliminate certain OEM features. Some Integy-branded items may be only compatible with the vehicle's OEM parts but not with another Integy-branded item due to design limitations. For multiple-fitment items, some parts may not be used based on application. Item# C28731GREEN Barcode: 91789035197

Features

  • Genuine Integy Parts Ship Fast Direct From Our US Warehouse
  • Top-Quality Materials & Superb Craftsmanship
  • Preferred by Knowledgable Model Hobbists & R/C Enthusiasts
  • Most Orders Processed Same Day. Reliable & Fast Shipping With Tracking Number
  • Check The Manufacturer's Support Website For Cross-Reference Part Search
  • See more on Amazon...

Brand: Integy   |   Manufacturer: Integy

Amazon Price: $29.99 | as of 08/23/2019(12:58am pst)
Availibility: Usually ships in 2-3 business days
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Hobbypark Aluminum Suspension Arms,Front & Rear, w/Tie Bar Replacement of 2555 3631 for 1/10 Tra...
  2. Red-Anodized Aluminum Shock Tower Rear for 1/10 RC Traxxas Slash 2WD Trucks
  3. Red-Anodized Aluminum Front Shock Tower 3639 for 1/10 RC Traxxas Slash 2WD Trucks
  4. Hobbypark Aluminum Suspension Arms,Front & Rear, w/Tie Bar Replacement of 2555 3631 for 1/10 Tra...
  5. Leslaur ZD Racing 2pcs 143mm Rear Shock Absorber Damper Suspension for 1/8 JLB HSP HPI Redcat RC Car...
  6. Hobbypark Aluminum Front Suspension Arms w/Tie Bar Replacement of 3631 for 1/10 Traxxas Slash 2WD Op...
  7. Woyisisi RC Truck Shocks Absorber RC Truck Upgrade Parts Oil Pressure Shocks Absorber for 9300-9304 ...
  8. Hobbypark Aluminum Suspension Arms,Front & Rear, w/Tie Bar Replacement of 2555 3631 for 1/10 Tra...
  9. Integy RC Model Hop-ups C28730GREEN Billet Machined Front Lower Suspension Arm for Arrma 1/8 Kraton ...
  10. Integy RC Model Hop-ups C28731GREEN Billet Machined Front Upper Suspension Arm for Arrma 1/8 Kraton ...

Most Wished For

  1. Traxxas 5862 Big Bore Shock Set, Complete with Springs
  2. Hobbypark 4PCS Aluminum Front & Rear Shock Absorber Assembled Red for 1/10 Traxxas Slash 4x4 4WD...
  3. fosa 4Pcs RC Shock Absorbers, Aluminum Alloy High Strength Springs Shocks Set Damper with 2 Bags of ...
  4. Pro-Line Racing 6063-01 Power Stroke Shocks (Rear)
  5. RPM 73755 Front Bulkhead for Traxxas 1/10 2WD Vehicles, Blue
  6. RPM 80245 Front A-Arms Blue Monster Jam/Rustler/Stampede/Slash (2)
  7. ProLine 606305 Powerstroke SC Universal Shock Mounting Hardware Kit
  8. RPM 80185 Rear A-Arms Blue E- Monster Jam, Rustler, Stampede
  9. Hobbypark for 1/10 Traxxas Slash 4x4 4wd Alloy Front & Rear Shock Absorber Springs Upgrade Parts...
  10. Pro-Line Racing 6063-00 Power Stroke Shocks (Front)

Most Gifted

  1. RPM Front Shock Tower 2WD Electric Slash, Stampede, Rustler, Bandit, Black
  2. Hobbypark Shock Absorber Assembled Front & Rear Shocks for 1/10 Traxxas Slash 4x4 4WD Upgrade Pa...
  3. Hobbypark 4PCS Aluminum Front & Rear Shock Absorber Assembled Red for 1/10 Traxxas Slash 4x4 4WD...
  4. Hot Racing SLS90T1111 Suspension Travel Limit Straps 90mm (Gunmetal)(2)
  5. Traxxas 1/16 Scale Rear Bulkhead Halves with Screws
  6. RPM 80249 Traxxas Slash 2WD, Nitro Slash, E-Stampede 2WD and E-Rustler
  7. RPM 80599 A-Arms-Red Traxxas Slash 2WD Rear
  8. Pro-Line Racing 6063-00 Power Stroke Shocks (Front)
  9. Atomik RC Alloy Front Lower Bulkhead, Red fits the Traxxas 1/10 Slash and Other Traxxas Models - Rep...
  10. ST Racing 6MM HD Aluminum Front Shock Tower for Traxxas 2WD Electrics

Top Selling

  1. RPM 80702 Front/Rear A-Arms Black Slash/Stampede 4x4 Black
  2. Atomik RC Alloy Front Steering Block, Blue fits the Traxxas 1/10 Slash and Other Traxxas Models - Re...
  3. Traxxas 5862 Big Bore Shock Set, Complete with Springs
  4. Hobbypark 4-Pack Aluminum Damper Front & Rear Shock Absorber Springs Assembled for 1/10 Traxxas ...
  5. Traxxas 3767A Blue-Anodized Aluminum Shock Caps (fits Ultra Shocks) (set of four)
  6. Traxxas 3740 Steel Suspension Pins, 2.5x31.5mm (pair)
  7. RPM 80245 Front A-Arms Blue Monster Jam/Rustler/Stampede/Slash (2)
  8. Hobbypark for 1/10 Traxxas Slash 4x4 4wd Alloy Front & Rear Shock Absorber Springs Upgrade Parts...
  9. Pro-Line Racing 6063-01 Power Stroke Shocks (Rear)
  10. Atomik RC Alloy Rear Axle Carrier, Blue fits the Traxxas 1/10 Slash and Other Traxxas Models - Repla...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Baby & Toddler Toys


Action Figures & Vehicles


Pretend Play


Games


Learning & Education Toys


Novelty & Gag Toys


Sports & Outdoor Play


Ride-On, Biking And Skating Toys


Kids Electronics & Video Games


Remote Controlled Vehicles


Model Building


Arts & Crafts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.