Frontpage > Toys and Hobby > Remote Controlled Vehicles > Transmissions

Best Transmissions - Buying Guide

Last Updated: 03/20/2019

Share on


  #1

Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 25mW/50mW/200mW Adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft

 PartNumber: WT03   |   Asin: B06XB2ZRBP

Features: Micro size, light weight. Plug and play, ready to fly, perfect for DIY. High image resolution, good image contour and perfect low illumination. Black PCB board prevent light-leaking, help to restore true color. Adjustable power 25mW/50mW/200mW, Long transmission range and less blink. Specification: Output power:0/25mW/50mW/200mW adjustable (Set output power on 0, to avoid frequency interference) Input power: 3.2-5.5V Current consumption: 250mA-510mA(25mW) 270mA-640mA(50mW) 330mA-740mA(200mW) Camera resolution: 600TVL Video system:NTSC Mini illumination: 1 lux Field of view: 120 FOV 150 DFOV Antenna dimensions: 22mm X 29mm diameter Antenna: cloverleaf antenna Frequency: 5.8GHz 5 bands 40 channels, with Raceband: 5658-5917 MHZ Size: 19.50*14.00mm(L*W) Weight: 5g

Features

  • Micro size, light weight
  • Compatible with more types of RX
  • Plug and play, ready to fly, perfect for DIY
  • High image resolution, good image contour and perfect low illumination
  • Adjustable power 25mW/50mW/200mW, Long transmission range and less blink
  • See more on Amazon...

Brand: Wolfwhoop   |   Manufacturer: Wolfwhoop

Package Dimensions: 1.5 x 2.4 x 3.7 inches (3.8 x 6.1 x 9.4 cm)

Amazon Price: $18.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: | Used Price: $16.93

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Wolfwhoop Q5 5.8GHz VTX with IPEX Antenna Connector and 0.01/25/50/100/200mW 37CH Switchable FPV Transmitter with FC Uart Support OSD Configuring via Betaflight Flight Control Board

 PartNumber: Q5   |   Asin: B076P69Y7D

It's similar to the Q3 but has a smaller profile that uses 20x20mm mounting pattern, which be designed for smaller micro builds.
One cool feature about this VTX is that you can mount it on top of your mini FC/PDB stack thanks to the 16x16mm mounting pattern.
OSD configuration using FC Uart (F3/F4/F7 with OSD)
Built-in BEC: 5V camera @under 300mA
One button frequency and power setup
25/50/100/200mW power switchable
Input voltage is 5V, if you want to use with 1S Lipo battery, The package is includes a 3.7V to 5V power booster

Specification:
Input voltage: 5V
Extra features: FC Uart, Parameter-adjusting Mode(0.01mW)
Built-in BEC: 5V camera @under 300mA
Output power:
25mW:100mA @5V
50mW:120mA @5V
100mW:180mA @5V
200mW:220mA @5V
Antenna connector: IPEX
Port connector: JST,6pin
Dimensions: 20(W)X20(D)mm, 16X16mm(hole)
Weight: 2.5g(excluding antenna)

Package included:
1 X VTX
1 X UFL pigtail
1 X power booster
1 X user manual

Note :

5645/5925/5945(E4/E7/E8) are not available sue to FCC regulation. Selecting 5645/5925/5945(E4/E7/E8) will be invalid action.

37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.

This equipment is being sold under FCC's amateur radio rules. Operators must require amateur radio license to operator legally in the US. Use of amateur equipment without a license or use of equipment on restricted frequencies could subject the operator to significant fines by the FCC. By purchasing this equipment, the user is agreeing that they understand these responsibilities and will operate the equipment legally. More information related to ARL, please go to http://www.arrl.org/getting-licensed.

Features

  • IPEX has more mating cycles and is more robust
  • You can do so with the push button on the VTX
  • 0.01mW-Power up and test your fpv system during a race with zero interference with any neighbor active channels
  • This VTX is that you can mount it on top of your mini FC/PDB stack thanks to the 16x16mm mounting pattern
  • FC Uart is basically a feature that allows your to change your VTX settings in Betaflight OSD or even from your Taranis Screen using LUA scripts
  • See more on Amazon...

Brand: Wolfwhoop   |   Manufacturer: Wolfwhoop

Package Dimensions: 0.24 x 3.15 x 4.72 inches (0.6 x 8.0 x 12.0 cm)

Amazon Price: $14.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit

Model: TRA5352R   |    Mpn: 5352R   |    Ean: 0885358124949   |    PartNumber: 5352R   |   Asin: B003HAW5U8

This is the 5352R H/D Rebuild Kit Revo/Maxx Trucks from Traxxas. Traxxas has grown to become the number-1 selling name in RTR nitro and electric models for the last 4 years running. No one has done more than Traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby. Traxxas, truly the fastest name in Radio Control.

Features

  • Heavy-duty slipper clutch rebuild kit
  • Includes steel disc/ aluminum friction pads (3)/ spring, Revo (1)/ spring, Maxx (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)
  • Replaces worn or damaged parts
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles
  • This product is made from high quality materials and designed for lasting performance
  • This is for use on RC vehicles such as the Traxxas Revo; consult your user's manual for exact parts listings
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 0.25 x 0.88 x 7.13 inches (0.6 x 2.2 x 18.1 cm)   |   Package Dimensions: 0.2 x 3.1 x 7 inches (0.5 x 7.9 x 17.8 cm)

Amazon Price: $9.50 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.50

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Traxxas 1/10 E-Revo Brushless * TRANSMISSION w/ INPUT, OUTPUT GEARS & SHAFTS *

 Ean: 0700118746486   |    PartNumber: DHZ8703   |   Asin: B01JF6QKW6

Traxxas 1/10 E-Revo Brushless (Model 5608 & 5608L)
Complete Unassembled Transmission

MSRP:54.50


Important Note: The first image is for illustration purposes only. Please refer to the product description for exact contents.

Requires Assembly: This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only.

Includes:

Front & Rear Gearbox Halves (Part # 3991X)
Input Shaft Drive Assembly w/ 18T Top Gear (Part # 3992)
20T Idler Gear & 5x18mm Shaft (Part # 3996X)
33T Output Gear (Part # 3984X)
Transmission Output Shaft (Part # 3969)
2 Ball Bearings - 5x11x4mm (Part # 5116 x 2)
2 Ball Bearings - 6x12x4mm (Part # 5117)
Cover Plates/Seals - Forward Only Conversion (Part # 5157)
6 Cap Head Machine Screws - 2.5x8mm (Part # 3965)
6 Countersunk Machine Screws - 3x12mm Hex Drive (Part # 2552)



This product is compatible with the following Model(s): E-Revo Brushless

Features

  • Complete Assembled Transmission Gear Box Halves Front and Rear (Part # 3991X) Input Driveshaft Assembly (Part # 3992) Wide Ratio Gear Set (Part #3974) 20T Idler Gear and Shaft (Part # 3996X) 33T Output Gears (Part # 3984X) Transmission Output Shaft (Part # 3969) Two (2) Ball Bearings 5x11mm (Part # 5116) Two (2) Ball Bearings 6x12mm (Part # 5117) Cover Plate and Seal (Part # 5157) Includes All Bearings and Screw Hardware as Pictured (Part # 5116 x 2)
  • Includes: Front & Rear Gearbox Halves (Part # 3991X) Input Shaft Drive Assembly w/ 18T Top Gear (Part # 3992) 20T Idler Gear & 5x18mm Shaft (Part # 3996X) 33T Output Gear (Part # 3984X) Transmission Output Shaft (Part # 3969) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 2) 2 Ball Bearings - 6x12x4mm (Part # 5117) Cover Plates/Seals - Forward Only Conversion (Part # 5157) 6 Cap Head Machine Screws - 2.5x8mm (Part # 3965) 6 Countersunk Machine Screws - 3x12mm Hex Drive (Part # 2
  • Part number(s) included (in factory packaging): 3991X 3992 3996X 3984X 3969 5116 5117 5157 3965 2552
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 3.13 x 2.75 x 1.38 inches (8.0 x 7.0 x 3.5 cm)   |   

Amazon Price: $54.50 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $54.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Hot Racing TE12HX01 Aluminum Transmission Case Slash Rustler Stampede

 Ean: 0083745237290   |    PartNumber: TE12HX01   |   Asin: B00XF8KNEM

Hot Racing aluminum transmission gearbox case with aluminum motor plate and arm mounts for use in the Traxxas Bandit, Rustler, 2WD Stampede, and 2WD SlashFEATURES: - CNC machined 6061 billet aluminum transmission case- CNC machined 6061 aluminum motor plate with added motor heat sink- CNC machined 6061 aluminum arm mount- Longer motor mounting slot to accommodate a greater gear ratio range- Motor plate with mounting for slash stock rear bumper- Reuses stock gears and transmission internals (see requirements below)YOU WILL RECEIVE: - One (1) aluminum transmission case with aluminum heat sink motor plate- Left and right aluminum arm mounts- Installation hardwareREQUIREMENTS: - Assembly and installation- Reuse of internal gear and components from existing transmission- Slipper assembly and spur gear- Medium threadlock on screws- Spur gear dust cover, including the plastic Traxxas 3792 or the Hot Racing aluminum TR3201COMMENTS: - For vehicles without a rear bumper, installation may not use all included hardware- This is an empty gear case and does not include any gears, shafts, or bearings, slipper, spur gear, etc. - Any transmission peripherals shown in photos (slipper, spur gear, bearings, etc. ) are not included- See Hot Racing TE12GX01 for a composite version of this casedescription revised by: SN October 25, 2017

Features

  • Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers
  • All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required
  • Hot Racing part number TE12HX01; UPC 083745237290
  • This item works with: Traxxas Bandit Electric, Rustler VXL Velineon Brushless, Rustler XL-5, Slash 2WD all versions, Stampede Electric, Stampede VXL, Stampede XL-5
  • See more on Amazon...

Brand: Hot Racing   |   Manufacturer: Hot Racing

Item Dimensions: 1.5 x 3 x 4 inches (3.8 x 7.6 x 10.2 cm)   |   Package Dimensions: 1 x 3.5 x 5.75 inches (2.5 x 8.9 x 14.6 cm)

Amazon Price: $53.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $54.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Traxxas Single Speed Transmission Conversion Kit For T-Maxx Classic Vehicle

Model: 5193X   |    Mpn: 5193X   |    Ean: 0020334519399   |    PartNumber: 5193X   |   Asin: B0006O5PP0

The Traxxas 5193X single speed conversion kit removes the factory 2-speed gears from your 2.5 T-Maxx classic transmission for reduced weight, less rotational mass. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Features

  • Single speed conversion kit removes the factory 2-speed gears from your 2.5 t-maxx classic transmission
  • Reduces weight and rotational mass
  • Essential for Electric Conversions
  • This product is made from high quality materials and designed for long-lasting performance
  • This is Replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 1.85 x 6.5 x 5.85 inches (4.7 x 16.5 x 14.9 cm)   |   Package Dimensions: 1.8 x 4.1 x 6.1 inches (4.6 x 10.4 x 15.5 cm)

First Available: 2017-08-28

Amazon Price: $11.00 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

Warranty: 30 day warranty against manufacturer defects

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

HPI 1/10 Bullet MT ST Nitro 3.0 SPUR GEAR, BEARINGS, SLIPPER CLUTCH & JOINT CUPS

 Ean: 0015568419812   |    PartNumber: DHZBulletSpurGear   |   Asin: B00NT5P490

HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)
54T Spur Gear, Bearings, Slipper Clutch & Joint Cups

MSRP: $55.99

This Product Includes:

Two (2) 10x15x4mm Ball Bearings (Part # B030)
Front Slipper Clutch Hub (Part # 101241)
Rear Slipper Clutch Hub (Part # 101242)
54 Tooth Spur Gear and Bushing (Part # 101207)
Black Molded Plastic Construction
One 6x43.5mm Gear Shaft (Part # 101233)
One (1) 4.5x18.5mm Cup Joint (Part # 101231)
One (1) 4.5x18mm Cup Joint (Part # 101232)
Two (2) Slipper Clutch Pads (Part # 101250)
Slipper Clutch Spring (Part # 101243)
One M6 Thin Type Locknut (Part # Z669)

This product is NEW in OEM Packaging and is from a New, Unused HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)

Part Numbers are for Reference Only. The parts included with this product are exclusive to what is pictured in this listing.

This product is compatible with the following Model: HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)

Features

  • 54T Spur Gear, Bearings, Slipper Clutch & Joint Cups for the HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)
  • This product is NEW in OEM Packaging and is from a New, Unused HPI 1/10 Bullet MT / ST 3.0 Nitro (Model 107004 107006)
  • Due to disassembled nature of this product, some parts may show slight signs of disassembly.
  • The parts included with this product are exclusive to what is pictured. See product description for exact contents.
  • Part Number(s) associated with this product (see product description for inclusion details 107006 107004 B030 101241 101242 101207 101233 101231 101232 101250 101243 Z669
  • See more on Amazon...

Brand: HPI Racing   |   Manufacturer: HPI Racing

Amazon Price: $26.40 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Traxxas 7712 X-Maxx Tailgate Protector (Includes Screws) Vehicle

Model: 7712   |    Mpn: 7712   |    Ean: 0020334771209   |    PartNumber: 7712   |   Asin: B0716P63FL

Traxxas 7712 X-Maxx tailgate protector (includes screws) use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Features

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 1 x 3.15 x 13.5 inches (2.5 x 8.0 x 34.3 cm)   |   Package Dimensions: 0.94 x 2.76 x 12.8 inches (2.4 x 7.0 x 32.5 cm)

First Available: 2017-05-08

Amazon Price: $6.00 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.00

Warranty: 30 day warranty against manufacturer defects

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Traxxas E-Maxx Brushless * SINGLE SPEED TRANSMISSION, INPUT/OUTPUT GEARS & SHAFT

 Ean: 0700118746271   |    PartNumber: 43227-650   |   Asin: B01JF6OSES

Traxxas 1/10 E-Maxx Brushless (Model 3908 & 3908L)
Complete Unassembled Transmission

MSRP:54.50


IMPORTANT NOTE: The first image in this listing may picture parts that are not included. Please refer to subsiquent images and the product description for exact contents.

Requires Assembly - This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only.

Includes:

Front & Rear Gearbox Halves (Part # 3991X)
Transmission Output Shaft (Part # 3969)
33T Output Gear (Part # 3984X)
Input Shaft Drive Assembly w/ 18T Top Gear (Part # 3992)
20T Idler Gear & 5x18mm Shaft (Part # 3996X)
2 Ball Bearings - 5x11x4mm (Part # 5116 x 2)
2 Ball Bearings - 6x12x4mm (Part # 5117)
Cover Plates/Seals - Forward Only Conversion (Part # 5157)
6 Countersunk Machine Screws - 3x12mm Hex Drive (Part # 2552)
6 Cap Head Machine Screws - 2.5x8mm (Part # 3965)



This product is compatible with the following Model(s): E-Maxx Brushless

Features

  • Complete Factory Assembled Transmission Transmission Gearbox Halves, Shift Detent Ball, Spring & Shift Shaft Seal (Part # 3991X) Output Shaft (Part # 3969) Output Gear with Spacers (Part # 3984X) Input Shaft w/ Drive Gear Assembly with 18Tooth Top Steel Gear (Part # 3992) Idler Gear 20 Tooth with Idler Gear Shaft (Part # 3996X) Four (4) 5x11mm Ball Bearings (Part # 5116) Two (2) 6x12mm Ball Bearings (Part # 5117) Cover Plate and Seals (Part # 5157) Transmission i
  • Includes: Front & Rear Gearbox Halves (Part # 3991X) Transmission Output Shaft (Part # 3969) 33T Output Gear (Part # 3984X) Input Shaft Drive Assembly w/ 18T Top Gear (Part # 3992) 20T Idler Gear & 5x18mm Shaft (Part # 3996X) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 2) 2 Ball Bearings - 6x12x4mm (Part # 5117) Cover Plates/Seals - Forward Only Conversion (Part # 5157) 6 Countersunk Machine Screws - 3x12mm Hex Drive (Part # 2552) 6 Cap Head Machine Screws - 2.5x8mm (Part # 3
  • Part number(s) included (in factory packaging): 3991X 3969 3984X 3992 3996X 5116 5117 5157 2552 3965
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 3.13 x 2.75 x 1.38 inches (8.0 x 7.0 x 3.5 cm)   |   

Amazon Price: $54.50 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $54.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Wolfwhoop WT05+RC832 Micro FPV AIO Camera and FPV Receiver Kit

 PartNumber: WT05+RC832   |   Asin: B074CR3HYB


WR832 Specification:
Power Supply: DC 12V
Working Frequency: 5.8GHz
Sensitivity:90 dBm
Type Standard: NTSC/PAL
Consumption Current: 200mA, Max
Receiver connector: RP SMA female
Antenna connector: RP SMA male
Available Channel: 40CH
Antenna Gain: 2dbi
Audio Carrier: 6.5MHz
Audio Output Level: 1.0 Vp-p Typ 10 K Ohm
Antenna impedance: 50 Ohm
Antenna Input Impedance: 50 Ohm TYP
Video impedance: 75 Ohm
Video Format : NTSC/PAL
Video Output Level: 1.0 Vp-p Typ 75 Ohm
Dimension: 80x65x15mm
Weight: 85g
Dimension (LXWXH): 3.15X2.56X0.59 inches
Notice:
Please get a 12V lipo battery for the receiver. We do not suggest over-voltage battery or car battery.
Please plug antenna before powering up, otherwise static electricity will damage the product.

WT05 Specification:
The AIO Camera combo is perfect for ultra micro drone. It is a combination of a FPV camera, a transmitter and an antenna. It includes everything into a single unit no bigger than one dollar coin.
All you need is to put it into your drone and power it by a 1S Lipo battery.
Needed To Complete with 1S Li-Po Battery and 5.8GHz FPV Headset or Monitor.

Specification:
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5658-5917MHz
Output power:25mW
Input voltage: 3.3V-5.5V
Current consumption: 280mA(typ)
Camera resolution: 600TVL
Field of view: 120
Video Format: NTSC
Antenna: Dipole Brass Antenna
Size: 15X 12.5mm(LX W)
Weight: 3.4g

Package Included:
1 x WR832 5.8GHz 40CH FPV Receiver
1 x WT05 AIO camera
1 x Receiver antenna
1 x Power cable
1 x AV cable
2 x User manual
2 x cloverleaf antenna
2 x Dipole antenna
1 x cable


Wolfwhoop is never good at brand promotion, the only thing we do is manufacturering.

Features

  • All in one vtx + camera + antenna+receiver, plug and play, ready to fly,easy installation for racing drone
  • WT05 AIO camera needed to complete with 1S Li-Po Battery and 5.8GHz FPV Headset or Monitor
  • 48CH AIO transmitter and camera + 40CH receiver RTF FPV Set, Five bands 40 channels with Raceband: 5658-5917 MHZ
  • Universal video transmitter and receiver for all, compatible with various kinds of remote control toys (RC helicopter, quadcopter, airplane and boat etc.)
  • AIO Camera + receiver + antenna, the perfect fpv RTF combination, and present free antennas as replacement (2pcs cloverleaf antenna+2pcs dipole antenna)
  • See more on Amazon...

Brand: Wolfwhoop   |   Manufacturer: Wolfwhoop

Package Dimensions: 3.46 x 4.09 x 5.98 inches (8.8 x 10.4 x 15.2 cm)

Amazon Price: $29.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

1/5 Rovan High Performance 7000 RPM Clutch HPI Baja 5B 5T 5SC Losi, FG CY Zenoah

 Ean: 0736846122308   |    PartNumber: 67025-1   |   Asin: B017ODPLKY

Rovan 7000 RPM High Performance Clutch Kit This clutch will spool up quicker for better acceleration (quicker response to throttle) Hardware is included that you see in the picture. Spare 7000 RPM spring included! Fits all HPI Baja, Rovan Baja and King motor Baja vehicles. Losi 5ive T, FG and others Fits CY, Zenoah and most clone motors, Great for scooters also!

Features

  • Rovan 7000 RPM High Performance Clutch Kit
  • This clutch will spool up quicker for better acceleration (quicker response to throttle)
  • Spare 7000 RPM spring included!
  • Fits all HPI Baja, Rovan Baja and King motor Baja vehicles. Losi 5ive T, FG and others
  • See more on Amazon...

Brand: Rovan RC   |   Manufacturer: Rovan Sports

Amazon Price: $18.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 2-3 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Redcat Racing Aluminum 2 Speed Transmission Housing, Purple

Model: 102225   |    Mpn: 102225   |    Ean: 0609132478109   |    PartNumber: 102225   |   Asin: B00E5L663A

Redcat Racing Aluminum 2 Speed Transmission Housing, Purple

Features

  • Aluminum 2 Speed Transmission Housing, Purple
  • RC Car Parts : 102225
  • Genuine Redcat Racing Parts
  • For troubleshooting and warranty information please contact a Redcat Racing Customer Service Specialist at 602-454-6445 or by emailing amazonsupport@redcatracing.com
  • NOTE: Please read the User Manual before use.
  • See more on Amazon...

Brand: Redcat Racing   |   Manufacturer: Redcat Racing

Item Dimensions: 0.25 x 2 x 2 inches (0.6 x 5.1 x 5.1 cm)   |   Package Dimensions: 0.75 x 3.86 x 5.71 inches (1.9 x 9.8 x 14.5 cm)

Amazon Price: $20.50 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.50

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

RC4WD AX2 2 Speed Transmission for Axial Wraith, SCX10 and Honcho

Model: RWDZ-U0006   |    Mpn: Z-U0006   |    Ean: 0837654346631   |    PartNumber: Z-U0006   |   Asin: B007OSGDY8

What's Included: 1 x AX2 2 Speed Transmission for Axial Wraith & SCX10/Honcho 1 x 15t 32p Hardened Steel Pinion Gear (Z-G0014) 1 x M3 x 15mm Set Screw (1 PCS from Z-S0650) 2 x Mini Plastic Rod End (2 PCS from Z-S0398) 5 x M3 x 10mm FHSC (Black) (Z-S0860) 4 x M3 x 8mm BHSC (Black) (Z-S0652) 2 x M3 x 12mm BHSC (Black) (Z-S0654) 1 x M3 x 3mm Set Screw (1 PCS from Z-S0124).

Features

  • CNC Machined Billet Aluminum
  • Wraith / SCX10 direct fit
  • Wide Steel 48 pitch internal gears
  • Shift Servo mount
  • Compatible With Other Brand Pinions and Spur Gears
  • See more on Amazon...

Brand: RC4WD   |   Manufacturer: HRP Distribution

Item Dimensions: 3.13 x 3.25 x 4.88 inches (8.0 x 8.3 x 12.4 cm)   |   Package Dimensions: 3.2 x 3.4 x 4.9 inches (8.1 x 8.6 x 12.4 cm)

Amazon Price: $89.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price:

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

SSD RC 2 Speed Transmission Kit for Wraith

 Ean: 0617135685202   |    PartNumber: SSD00085   |   Asin: B01HP77D78

Compatible with the stock Axial top shaft and gear cover. What's Included: 1 X 2 Speed Transmission assembled with motor mount 4 X M3 x 10mm flat head screws 3 X M2.5 x 6mm flat head screws 4 X M3 x 8mm button head screws 2 X M3 x 12mm button head screws 1 X M3 x 15mm threaded set screw 2 X 3mm mini plastic rod ends Technical Specs: Internal 1st gear ratio: 4.91:1 (stock Axial is 2.6:1) Internal 2nd gear ratio: 1.8:1 Output shaft OD: 5mm Weight (when fully assembled with shift servo) : 335g Note: This is a conversion kit, not a complete transmission. To complete the assembly it requires: Stock Axial transmission input shaft (AX30198 or AX31149) Stock 20T drive gear (AX30394, AX30162) Stock Axial slipper clutch assembly & spur gear Stock Axial transmission idler shaft (AX31090) Stock Axial transmission gear cover (AX80078) Stock Axial transmission bearings: 4 * 5 x 10 x 4mm 5 x 10 x 11mm 8 x 16 x 5mm 15 x 21 x 4mm Will require shifters to be removed from Wraith interior. This can be used on an SCX10 but shorter driveshafts are required.

Features

Brand: SSD RC   |   Manufacturer: SSD RC

Item Dimensions: 0.67 x 0.39 x 0.31 inches (1.7 x 1.0 x 0.8 cm)   |   

Amazon Price: $99.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $99.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Hurtz Dig Transmission V2, Clear

 Ean: 0791512778876   |    PartNumber: VPS01351   |   Asin: B075TKHHSJ

Product Description Vanquish Products Aluminum Hurtz Shifter 3 Position Dig for Axial 3-Gear Transmissions Updated dig unit was designed to increase the capability of your vehicle while maintaining maximum strength Compatible with Axial SCX10, SCX10-II RTR and AX10. May also be used in Wraith by changing the transmission case Rear output is bearing supported for better driveline efficiency and cross drilled to work with thru pin style driveshafts Rear output does not slide in and out, so driveshaft length is easier to manage Servo mount is attached to dig case for simple installation All drive parts are made from high quality and chromoly steel Total shifter travel needed to shift to all three positions is 0.73 inches, a 24mm servo horn is recommended Servo mount can use most standard size servos* The lever design of the shifter means that you do not need an expensive servo to reliably operate this unit** V2 design works with stock Axial 3-gear transmission cases as well as any Vanquish Products SCX10 transmission housing*** * Servo case designs and offsets vary by manufacturer, Futaba, Hitec and Tactic servos have been tested to fit but not every model can be verified ** A radio with an open auxiliary channel and programmable end points is needed to ensure that the dig unit works properly and that your servo will not overheat *** The Hurtz dig will mount onto any Axial 3 gear transmission case that uses a bolt on metal motor plate.

Features

  • Vanquish Products Aluminum Hurtz Shifter 3 Position Dig for Axial 3-Gear Transmissions
  • See more on Amazon...

Brand: Vanquish   |   Manufacturer: Vanquish Products

Item Dimensions: 1.5 x 4 x 6.2 inches (3.8 x 10.2 x 15.7 cm)   |   Package Dimensions: 1.26 x 3.98 x 6.54 inches (3.2 x 10.1 x 16.6 cm)

Amazon Price: $78.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $95.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Redcat Racing 06034 Transmission, 2 Speed

Model: 06034   |    Mpn: 06034   |    Ean: 0716080180623   |    PartNumber: 06034   |   Asin: B00D25INAE

Works with : SHOCKWAVE,TORNADO BB,TORNADO S30,TSUNAMI (nitro),VORTEX SS

Features

  • 2 Speed Transmission 06034
  • Can also be used in NITRO Lightning's Replacement gears are 06032 and 06033 Same as 06041
  • RC Car Parts : 06034
  • For troubleshooting and warranty information please contact a Redcat Racing Customer Service Specialist at 602-454-6445 or by emailing amazonsupport@redcatracing.com
  • NOTE: Please read the User Manual before use.
  • See more on Amazon...

Brand: Redcat Racing   |   Manufacturer: Redcat Racing

Item Dimensions: 1.2 x 2.3 x 2.25 inches (3.0 x 5.8 x 5.7 cm)   |   Package Dimensions: 1 x 2.1 x 2.2 inches (2.5 x 5.3 x 5.6 cm)

Amazon Price: $18.03 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $22.99

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

AXIAL AX31134 2-Speed Hi/Lo Tranny Output Shaft, 5 x 35mm

Model: AXIC1134   |    Mpn: AX31134   |    Ean: 8168740126250   |    PartNumber: AX31134   |   Asin: B00LYD9LZ2

FEATURES: Steel construction Connects to diff input shaft inside transmission case. INCLUDES: 5x35mm 2-Speed Output Shaft with Pin JXS 08/06/14 IR/JXS.. The product is manufactured in TAIWAN.

Features

  • FEATURES: Steel construction Connects to diff input shaft inside transmission case
  • INCLUDES: 5x35mm 2-Speed Output Shaft with Pin JXS 08/06/14 IR/JXS
  • The product is durable
  • See more on Amazon...

Brand: AXIAL   |   Manufacturer: Hobbico Inc

Item Dimensions: 0.25 x 2.63 x 4 inches (0.6 x 6.7 x 10.2 cm)   |   Package Dimensions: 0.25 x 2.63 x 4 inches (0.6 x 6.7 x 10.2 cm)

Amazon Price: $4.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.89

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

SunFounder FPV Image Transmitter Kit with 700TVL HD Camera + 200mW Mini TS5823 32 Channel AV Transmitter + 5.8G Mushroom Antenna for Quadcopter QAV250 ZMR250 Q250 QAV210 QAV180

 Ean: 0701715368620   |    PartNumber: FPV Image Transceiver Kit   |   Asin: B01MCT9K5E

Introduction
This low-power-consumption and lightweight image transceiver kit with high resolution and strong signal is a best choice for mass FPV racing drone hobbyists. The novelty kit has 5.8G transmitting frequency and 32 frequency points; it supports stable code dialing within a transmission distance of 300 meters at most. The kit is equipped with a Sony 700TVL HD camera, which provides vivid and clear images. Thus, this kit is perfect in all aspects for small multicopters and ultra-light aircrafts.
Recommended FPV Goggles https://www.amazon.com/dp/B01NAHB4P8

Image Transceiver Kit
Transmitting Frequency: 5.6-5.9GHz
Frequency Point: 32 points
Reference Range: about 300m

Camera Module
Resolution (horizontally): 700TVL
Effective Pixel: PAL: 976H 582V (570,000 pixels)
Signal System: PAL (by default)

5.8G Mushroom Antenna
Frequency Range: 5725-5875MHz
Voltage Standing Wave Ratio (VSWR):

Features

  • The high-quality images, stable signal, and mini design of this kit will definitely bring you excellent FPV experience!
  • Uses an HD color PAL 700TVL camera with 2.8mm lens, supporting micro power and wide dynamic range.
  • Adopts a 200mW mini-sized TS5823 transmitter, with a reference range of 300m.
  • Equipped with a 5.8G circular polarized mushroom antenna, providing a long transmission distance and wide angle.
  • Provides with a user guide for installation and debugging and technical support. Video tutorials: https://www.youtube.com/watch?v=fYvKcvsYS0w
  • See more on Amazon...

Brand: SunFounder   |   Manufacturer: SunFounder

Package Dimensions: 3.62 x 6.22 x 6.46 inches (9.2 x 15.8 x 16.4 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Wolfwhoop TX1 5.8GHz 48CH FPV 0mW/25mW/200mW Switchable Transmitter with IPEX Line Antenna Mini VTX

 PartNumber: TX1   |   Asin: B072C3RMLQ

The adjustable micro video transmitter with its small form factor and mounted antenna it makes small FPV builds a breeze. Weighing a mere 2.2g makes those lighter builds even lighter.
This board has the option to easily connect to a lens board,It's compatible with 5.8GHz receivers. Spektrum, Futaba, FlySky, or any branded receivers.

Specification and Parameters: Input voltage: 3.2-5.5V
Extra features: 0mW(setting VTX without interference)
Power supply: 5V Camera @ under 300mA Max
Output power:
25mW: 320mA @3.7V
200mW: 650mA @3.7V
Antenna connector: IPEX/U.FL
Port connector: 5pin
Dimensions: 19(W) X15(D) mm
Weight: 2.2g(excluding antenna)
Kit included: 1XVTX, 1 UFL antenna

Features

  • Video system: NTSC/PAL
  • Micro size and light weight only 2.2g
  • Super mini 5.8GHz 408CH FPV transmitter
  • Suitable for FPV drone, RC car
  • Specially designed for DIY hobby
  • See more on Amazon...

Brand: Wolfwhoop   |   Manufacturer: Wolfwhoop

Package Dimensions: 0.2 x 3.46 x 5.04 inches (0.5 x 8.8 x 12.8 cm)

Amazon Price: $10.99 | as of 03/20/2019(7:53pm pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit
  2. Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 25mW/50mW/200mW Adjustable Transmitter with Cloverle...
  3. Hurtz Dig Transmission V2, Clear
  4. Wolfwhoop WT05+RC832 Micro FPV AIO Camera and FPV Receiver Kit
  5. Redcat Racing 06034 Transmission, 2 Speed
  6. AXIAL AX31134 2-Speed Hi/Lo Tranny Output Shaft, 5 x 35mm
  7. Hot Racing TE12HX01 Aluminum Transmission Case Slash Rustler Stampede
  8. SunFounder FPV Image Transmitter Kit with 700TVL HD Camera + 200mW Mini TS5823 32 Channel AV Transmi...
  9. Wolfwhoop TX1 5.8GHz 48CH FPV 0mW/25mW/200mW Switchable Transmitter with IPEX Line Antenna Mini VTX
  10. Traxxas Single Speed Transmission Conversion Kit For T-Maxx Classic Vehicle

Most Wished For

  1. Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 25mW/50mW/200mW Adjustable Transmitter with Cloverle...
  2. Traxxas E-Maxx Brushless * SINGLE SPEED TRANSMISSION, INPUT/OUTPUT GEARS & SHAFT
  3. Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit
  4. Hot Racing TE12HX01 Aluminum Transmission Case Slash Rustler Stampede
  5. Wolfwhoop WT05+RC832 Micro FPV AIO Camera and FPV Receiver Kit
  6. 1/5 Rovan High Performance 7000 RPM Clutch HPI Baja 5B 5T 5SC Losi, FG CY Zenoah
  7. Redcat Racing Aluminum 2 Speed Transmission Housing, Purple
  8. RC4WD AX2 2 Speed Transmission for Axial Wraith, SCX10 and Honcho
  9. SSD RC 2 Speed Transmission Kit for Wraith
  10. Traxxas 7712 X-Maxx Tailgate Protector (Includes Screws) Vehicle

Most Gifted

  1. Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit
  2. Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 25mW/50mW/200mW Adjustable Transmitter with Cloverle...
  3. Hurtz Dig Transmission V2, Clear
  4. Wolfwhoop WT05+RC832 Micro FPV AIO Camera and FPV Receiver Kit
  5. Redcat Racing 06034 Transmission, 2 Speed
  6. AXIAL AX31134 2-Speed Hi/Lo Tranny Output Shaft, 5 x 35mm
  7. Hot Racing TE12HX01 Aluminum Transmission Case Slash Rustler Stampede
  8. SunFounder FPV Image Transmitter Kit with 700TVL HD Camera + 200mW Mini TS5823 32 Channel AV Transmi...
  9. Wolfwhoop TX1 5.8GHz 48CH FPV 0mW/25mW/200mW Switchable Transmitter with IPEX Line Antenna Mini VTX
  10. Traxxas Single Speed Transmission Conversion Kit For T-Maxx Classic Vehicle

Top Selling

  1. Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 25mW/50mW/200mW Adjustable Transmitter with Cloverle...
  2. Wolfwhoop Q5 5.8GHz VTX with IPEX Antenna Connector and 0.01/25/50/100/200mW 37CH Switchable FPV Tra...
  3. Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit
  4. Traxxas 1/10 E-Revo Brushless * TRANSMISSION w/ INPUT, OUTPUT GEARS & SHAFTS *
  5. Hot Racing TE12HX01 Aluminum Transmission Case Slash Rustler Stampede
  6. Traxxas Single Speed Transmission Conversion Kit For T-Maxx Classic Vehicle
  7. HPI 1/10 Bullet MT ST Nitro 3.0 SPUR GEAR, BEARINGS, SLIPPER CLUTCH & JOINT CUPS
  8. Traxxas 7712 X-Maxx Tailgate Protector (Includes Screws) Vehicle
  9. Traxxas E-Maxx Brushless * SINGLE SPEED TRANSMISSION, INPUT/OUTPUT GEARS & SHAFT



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Baby & Toddler Toys


Action Figures & Vehicles


Pretend Play


Games


Learning & Education Toys


Novelty & Gag Toys


Sports & Outdoor Play


Ride-On, Biking And Skating Toys


Kids Electronics & Video Games


Remote Controlled Vehicles


Model Building


Arts & Crafts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.